Polyisobutylene-Based pH-Responsive Self-Healing Polymeric Gels

A bond swap algorithm for simulating dynamically crosslinked polymers

Materials incorporating covalent adaptive networks (CAN), e.g., vitrimers, have received significant scientific attention due to their distinctive attributes of self-healing and stimuli-responsive properties. Different from direct crosslinked systems, bivalent and multivalent systems require a bond swap algorithm that respects detailed balance, considering the multiple equilibria in the system. Here, we propose a simple and robust algorithm to handle bond swap in multivalent and multi-species CAN systems. By including a bias term in the acceptance of Monte Carlo moves, we eliminate the imbalance from the bond swap site selection and multivalency effects, ensuring the detailed balance for all species in the system.

Polydopamine-Reinforced Hemicellulose-Based Multifunctional Flexible Hydrogels for Human Movement Sensing and Self-Powered Transdermal Drug Delivery

The preparation of bio-based hydrogels with excellent mechanical properties, stable electrochemical properties, and self-adhesive properties remains a challenge. In this study, nano-polydopamine-reinforced hemicellulose-based hydrogels with typical multistage pore structures were prepared. The nanocomposite hydrogels exhibit stable mechanical properties and show no significant crushing phenomenon after 1000 cycles of cyclic compression. Its ultimate tensile strain was 101%, which is significantly higher than that of native skin. The shear adhesion strength of the hydrogel to skin tissue reaches 7.52 kPa, which is better than fibrin glue (Greenplast) (5 kPa), and the excellent adhesion property prolongs the service time of the hydrogel in biomedicine applications. The impedance of the hydrogel was reduced and the electrical conductivity was increased with the addition of nano-polydopamine. The prepared nanocomposite hydrogel can detect various body movements (even throat vibrations) in real time as a motion sensor while being able to rapidly load cationic drugs and facilitate transdermal introduction of electrically stimulated drug ions as a drug patch. It provides theoretical support for the fabrication of hemicellulose-based hydrogels with excellent properties through molecular design and nanoparticle reinforcement. This has important implications for the development of next-generation flexible materials suitable for health monitoring and self-administration.

Microstructure and Self-Healing Capability of Artificial Skin Composites Using Biomimetic Fibers Containing a Healing Agent

The aging and damage of artificial skin materials for artificial intelligence robots are technical problems that need to be solved urgently in their application. In this work, poly (vinylidene fluoride) (PVDF) fibers containing a liquid agent were fabricated directly as biomimetic microvasculars, which were mixed in a glycol-polyvinyl alcohol-gelatin network gel to form biomimetic self-healing artificial skin composites. The self-healing agent was a uniform-viscous buffer solution composed of phosphoric acid, acetic acid, and sodium carboxymethyl cellulose (CMC-Na), which was mixed under 40 °C. Microstructure analysis showed that the fiber surface was smooth and the diameter was uniform. SEM images of the fiber cross-sections showed that there were uniformly distributed voids. With the extension of time, there was no phenomenon of interface separation after the liquid agent diffused into the matrix through the fiber cavity. The entire process of self-healing was observed and determined including fiber breakage and the agent diffusion steps. XRD and FT-IR results indicated that the self-healing agent could enter the matrix material through fiber damage or release and it chemically reacted with the matrix material, thereby changing the chemical structure of the damaged matrix. Self-healing behavior analysis of the artificial skin indicated that its self-healing efficiency increased to an impressive 97.0% with the increase in temperature to 45 °C.

Self-Healing Polymers and Composites: Extrinsic Routes

:

Polymers have the property to convert the physical stress to covalent bond shuffling, thereby acting as the healing agents. Polymeric coatings, paints, electronic devices, drug delivery, and many other applications find self-healing materials as a smart technique to prolong the life cycle of the end products. The idea behind these artificial materials is to make them behave like the human body. It should sense the failure and repair it before it becomes worse or irreparable. Researchers have explored several polymeric materials which can self-heal through intrinsic or extrinsic mechanisms. This review specifically focuses on extrinsic routes governed by mechanical stress, temperature change in a covalent bond, humidity, variation in pH, optical sensitivity, and electrochemical effects. Each possible mechanism is further supported by the molecules or bonds which can undergo the transformations under given conditions. On a broader scale, bonds that can self-repair by mechanical force, thermal treatment, chemical modifications, UV irradiation, or electromagnetic phenomenon are covered under this review. It brings into the notice the shortcomings or challenges in adopting the technology to the commercial scale. The possible molecules or bonds which can undergo self-healing under certain conditions have been distinctly presented in a well-segregated manner. This review is envisaged to act as a guide for researchers working in this area.

Thermally Driven Diselenide Metathesis: Polarization Process vs Radical Process

Diselenide, as a dynamic covalent bond, has been widely applied in functional materials due to its response to light, heat, sonication, pH, and other stimuli. Herein, a polarization-induced metathesis mechanism for diselenides under heating conditions in the dark is proposed. First, a radical trap experiment is used to prove that the exchange reaction of diselenides in the dark does not involve any radicals. Second, the dynamic exchange reaction of diselenides is found to be affected not only by the polarity of the solvent but also by the introduction of polar groups into the molecular skeleton. Furthermore, DFT calculations also support the notion that polarity has a large effect on the heterolytic rather than homolytic bond dissociation energies. The experimental results for allyl selenide small molecules, polymers, and polymer materials catalyzed by diselenide all support the polarization-induced metathesis mechanism. In short, we successfully enhanced the understanding of the mechanism for diselenide metathesis.

Block Copolymer Synthesis by the Combination of Living Cationic Polymerization and Other Polymerization Methods

The foremost limitation of block copolymer synthesis is to polymerize two or more different types of monomers with different reactivity profiles using a single polymerization technique. Controlled living polymerization techniques play a vital role in the preparation of wide range of block copolymers, thus are revolutionary techniques for polymer industry. Polymers with good control over molecular weight, molecular weight distribution, chain-end functionality and architectures can be prepared by these processes. In order to improve the existing applications and create new opportunities to design a new block copolymer system with improved physical and chemical properties, the combination of two different polymerization techniques have tremendous scope. Such kinds of macromolecules may be attended by combination of homopolymerization of different monomers by post-modification techniques using a macroinitiator or by using a dual initiator which allows the combination of two mechanistically distinct techniques. This review focuses on recent advances in synthesis of block copolymers by combination of living cationic polymerization with other polymerization techniques and click chemistry.

Acid- and Thiol-Cleavable Multifunctional Codelivery Hydrogel: Fabrication and Investigation of Antimicrobial and Anticancer Properties

Hydrogels serving as a drug carrier was realized by entrapping small-sized drug molecules within their cross-linked interstitial networks. After covering the targeted location, hydrogels interact with the physiological fluids and swell, resulting in an increased interspace between networks for the outside diffusion of drugs. However, inevitable in vivo inflammatory responses or bacterial infection on the implant materials and persistent cargo release are still challenging. Herein, we report the fabrication of dual-responsive hydrogels based on acid-sensitive poly(ethylenimine) (PEI) derivative (PEI(-COOH/-vinyl)), thiol-responsive camptothecin prodrug monomer (CPTM), and hydrophilic oligo(ethylene glycol) methyl ether acrylate (OEGMA) by a conventional radical polymerization. Curcumin was then solubilized into the hydrogels to endow them with antimicrobial and cancer resistance properties. The in vitro experiments exhibited sustained hydrogel dissolution and CPT release in a simulated physiological environment. The antimicrobial and cytotoxicity tests of drug-loaded hydrogels using methicillin-resistant Staphylococcus aureus (MRSA) strains and HeLa cancer cell lines, respectively, indicated that the hydrogels possessed efficient antimicrobial effects and could successfully inhibit the growth of cancer cells.

Recent Progress in 3D Printing of Elastic and High-Strength Hydrogels for the Treatment of Osteochondral and Cartilage Diseases

Despite considerable progress for the regenerative medicine, repair of full-thickness articular cartilage defects and osteochondral interface remains challenging. This low efficiency is largely due to the difficulties in recapitulating the stratified zonal architecture of articular cartilage and engineering complex gradients for bone-soft tissue interface. This has led to increased interest in three-dimensional (3D) printing technologies in the field of musculoskeletal tissue engineering. Printable and biocompatible hydrogels are attractive materials for 3D printing applications because they not only own high tunability and complexity, but also offer favorable biomimetic environments for live cells, such as porous structure, high water content, and bioactive molecule incorporation. However, conventional hydrogels are usually mechanically weak and brittle, which cannot reach the mechanical requirements for repair of articular cartilage defects and osteochondral interface. Therefore, the development of elastic and high-strength hydrogels for 3D printing in the repairment of cartilage defects and osteochondral interface is crucial. In this review, we summarized the recent progress in elastic and high-strength hydrogels for 3D printing and categorized them into six groups, namely ion bonds interactions, nanocomposites integrated in hydrogels, supramolecular guest-host interactions, hydrogen bonds interactions, dynamic covalent bonds interactions, and hydrophobic interactions. These 3D printed elastic and high-strength hydrogels may provide new insights for the treatment of osteochondral and cartilage diseases.

Polypeptide-based self-healing hydrogels: Design and biomedical applications

Self-healing hydrogels can heal themselves on the damaged sites, which opens up a fascinating way for enhancing lifetimes of materials. Polypeptide/poly(amino acid) is a class of polymers in which natural amino acid monomers or derivatives are linked by amide bonds with a stable and similar secondary structure as natural proteins (α-helix or β-fold). They have the advantages of nontoxicity, biodegradability, and low immunogenicity as well as easy modification. All these properties make polypeptides extremely suitable for the preparation of self-healing hydrogels for biomedical applications. In this review, we mainly focus on the progress in the fabrication strategies of polypeptide-based self-healing hydrogels and their biomedical applications in the recent 5 years. Various crosslinking methods for the preparation of polypeptide-based self-healing hydrogels are first introduced, including host-guest interactions, hydrogen bonding, electrostatic interactions, supramolecular self-assembly of β-sheets, and reversible covalent bonds of imine and hydrazone as well as molecular multi-interactions. Some representative biomedical applications of these self-healing hydrogels such as delivery system, tissue engineering, 3D-bioprinting, antibacterial and wound healing as well as bioadhesion and hemostasis are also summarized. Current challenges and perspectives in future for these "smart" hydrogels are proposed at the end . STATEMENT OF SIGNIFICANCE: Polypeptides with the advantages of nontoxicity, biodegradability, hydrophilicity and low immunogenicity, are extremely suitable for the preparation of self-healing hydrogels in biomedical applications. Recently, the researches of polypeptide-based self-healing hydrogel have drawn the great attentions for scientists and engineers. A review to summarize the recent progress in design and biomedical applications of these polypeptide-based self-healing hydrogels is highly needed. In this review, we mainly focus on the progress in fabrication strategies of polypeptide-based self-healing hydrogels and biomedical applications in recent five years and aim to draw the increased attention to the importance of these "smart" hydrogels, facilitating the advances in biomedical applications. We believe this work would draw interest from readers of Acta Biomaterialia.

Toward Stimuli-Responsive Dynamic Thermosets through Continuous Development and Improvements in Covalent Adaptable Networks (CANs)

Covalent adaptable networks (CANs), unlike typical thermosets or other covalently crosslinked networks, possess a unique, often dormant ability to activate one or more forms of stimuli-responsive, dynamic covalent chemistries as a means to transition their behavior from that of a viscoelastic solid to a material with fluid-like plastic flow. Upon application of a stimulus, such as light or other irradiation, temperature, or even a distinct chemical signal, the CAN responds by transforming to a state of temporal plasticity through activation of either reversible addition or reversible bond exchange, either of which allows the material to essentially re-equilibrate to an altered set of conditions that are distinct from those in which the original covalently crosslinked network is formed, often simultaneously enabling a new and distinct shape, function, and characteristics. As such, CANs span the divide between thermosets and thermoplastics, thus offering unprecedented possibilities for innovation in polymer and materials science. Without attempting to comprehensively review the literature, recent developments in CANs are discussed here with an emphasis on the most effective dynamic chemistries that render these materials to be stimuli responsive, enabling features that make CANs more broadly applicable.

Doubly Dynamic Hydrogel Formed by Combining Boronate Ester and Acylhydrazone Bonds

The incorporation of double dynamic bonds into hydrogels provides an effective strategy to engineer their performance on demand. Herein, novel hydrogels were PREPARED by combining two kinetically distinct dynamic covalent bonds, boronate ester and acylhydrazone bonds, and the synergistic properties of the hydrogels were studied comprehensively. The functional diblock copolymers P(N-isopropyl acrylamide-co-N-acryloyl-3-aminophenylboronic acid)-b-(N-isopropyl acrylamide-co-diacetone acrylamide) (PAD) were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The hydrogel was constructed by exploiting dynamic reaction of phenyboronic acid moieties with polyvinyl alcohol (PVA) and ketone moieties with adipic dihydrazide (ADH) without any catalyst. The active boronate ester linkage endows the hydrogel with fast gelation kinetics and self-healing ability, and the stable acylhydrazone linkage can enhance the mechanical property of the hydrogel. The difference in kinetics endows that the contribution of each linkage to mechanical strength of the hydrogel can be accurately estimated. Moreover, the mechanical property of the hydrogel can be readily engineered by changing the composition and solid content, as well as by controlling the formation or dissociation of the dynamic linkages. Thus, we provide a promising strategy to design and prepare multi-responsive hydrogels with tunable properties.

Unraveling the Effect of PEG Chain Length on the Physical Properties and Toxicant Removal Capacities of Cross-Linked Network Synthesized by Thiol-Norbornene Photoclick Chemistry

With the aim to develop chemical adsorbents that are inherently nontoxic to living beings and the environment, a gel system based on thiol-norbornene photoclick chemistry was developed. Norbornene was strategically functionalized with different poly(ethylene glycol) (PEG) chains to produce PEG-functionalized macromonomers. The influence of incorporating PEG in the cross-linked network was evaluated on the basis of its physical properties and dye-removing efficiency from aqueous solutions. The excellent swelling ability of the gels in organic solvents was found to improve with the PEG chain length. The rheological measurements of the as-synthesized materials also exhibited the presence of elasticity in the network, and a decrease in storage and loss moduli was observed with an increase in PEG molecular weight. The materials possess excellent thermal stability, which enhanced with an increase in PEG chain length, as revealed from thermogravimetric analysis (TGA). Differential scanning calorimetry (DSC) studies revealed the tendency of higher-molecular-weight PEG to form a crystalline phase in the network. Kinetic studies of dye removal from aqueous solutions by the as-prepared cross-linked networks indicate that the dye removal proceeds via pseudo-second-order kinetics. The study of adsorption isotherm of the removal process indicates that the adsorption follows the Langmuir isotherm model. In this present work, we have thoroughly evaluated the influence of PEG chain length on several physical properties and toxic cationic dye removal efficiencies of thiol-norbornene photo-cross-linked networks.

Fluorescent Self-Healing Carbon Dot/Polymer Gels

Multicolor, fluorescent self-healing gels were constructed through reacting carbon dots produced from different aldehyde precursors with branched polyethylenimine. The self-healing gels were formed through Schiff base reaction between the aldehyde units displayed upon the carbon dots' surface and primary amine residues within the polyethylenimine network, generating imine bonds. The dynamic covalent imine bonds between the carbon dots and polymeric matrix endowed the gels with both excellent self-healing properties as well as high mechanical strength. Moreover, the viscoelastic properties of the gels could be intimately modulated by controlling the ratio between the carbon dots and polymer. The distinct fluorescence emissions of the gels, originating from the specific carbon dot constituents, were employed for fabrication of light emitters at different colors, particularly generating white light.

Progress in self-healing hydrogels assembled by host–guest interactions: preparation and biomedical applications

Preparation and biomedical applications of self-healing hydrogels assembled from hosts of cyclodextrins and cucurbit[n]urils with various guests were reviewed.

A tetraphenylethylene-based acylhydrazone gel for selective luminescence sensing

A supramolecular gel based on dynamic covalent acylhydrazone bonding for selective and sensitive Cu²⁺ and subsequent CN⁻ detection has been reported.

Amino acid-derived stimuli-responsive polymers and their applications

The recent advances achieved in the study of various stimuli-responsive polymers derived from natural amino acids have been reviewed.

Thermoresponsive Pyrrolidone Block Copolymer Organogels from 3D Micellar Networks

A new series of amphiphilic pyrrolidone diblock copolymers poly[N-(2-methacrylaoyxyethyl)pyrrolidone]-block-poly(methyl methacrylate) (PNMP m -b-PMMA n ; where m is fixed at 37 and n is varied from 45 to 378) is developed. Spontaneously situ-gelling behaviors are observed in isopropanol when n varies from 117 to 230, whereas only dissolution or precipitation appears when n is beyond this region. Further analysis reveals that uniform thermoinduced reversible gel-sol transitions are observed in those organogels, which is attributed to the disassembly from micellar networks to micelles as confirmed by electron microscopy and other techniques. The gel-sol transition temperature is highly dependent on n and increases as n increases. Conformational interactions analyzed using 1H NMR and 2D Noesy NMR suggest that the thermoinduced stretch of solvophilic PNMP segments within micelles and the sequencing variation in the isopropanol molecules are the major cause of the gel-sol transitions.

Stimuli responsive self-healing polymers: gels, elastomers and membranes

The development of responsive polymers with self-healing properties has expanded significantly which allow for the fabrication of complex materials in a highly controllable manner, for diverse uses in biomaterials science, electronics, sensors and actuators and coating technologies.

Self-Healing Supramolecular Hydrogels Based on Reversible Physical Interactions

Dynamic and reversible polymer networks capable of self-healing, i.e., restoring their mechanical properties after deformation and failure, are gaining increasing research interest, as there is a continuous need towards extending the lifetime and improving the safety and performance of materials particularly in biomedical applications. Hydrogels are versatile materials that may allow self-healing through a variety of covalent and non-covalent bonding strategies. The structural recovery of physical gels has long been a topic of interest in soft materials physics and various supramolecular interactions can induce this kind of recovery. This review highlights the non-covalent strategies of building self-repairing hydrogels and the characterization of their mechanical properties. Potential applications and future prospects of these materials are also discussed.

Selective recovery of Ag(I) coordination anion from simulate nickel electrolyte using corn stalk based adsorbent modified by ammonia-thiosemicarbazide

In nickel electrolyte, Ag(I) was present at trace level concentration (10-20 mg L(-1)) and existed in the form of AgCli(1-i) coordination anion, instead of Ag(+) positive ion usually in several sources. In the present study, TSC-NH3-OCS adsorbent based on natural corn stalk modified by ammonia (NH3)-thiosemicarbazide (TSC) was synthesized and characterized using some instrumental techniques. The TSC-NH3-OCS adsorbent could selectively adsorb Ag(I) as AgCl(i)(1-i) coordination anion from the Ag(I)-Cu(II)-Ni(II) simulate nickel electrolyte, especially in the case of the very high levels of Cu(II) and Ni(II), which significantly outperforms the commercial available resins. The adsorption mechanism was believed to be electrostatic interaction of the protonated bands of AgCl4(3-) with protonated thiol form of the thioamide units by FTIR and XPS analysis. The maximum adsorption capacity in the Ag(I) single and Ag(I)-Cu(II)-Ni(II) ternary system were obtained and calculated as 153.54 and 46.69 mg g(-1), respectively. The reasons that the maximum adsorption capacity of AgCl(i)(1-i) from the single and ternary system varied widely could be explained by adsorption kinetic and thermodynamic results. In addition, three successive sorption/desorption cycle runs from ternary system were performed which indicated that the TSC-NH3-OCS adsorbent has a good performance for recovery Ag(I) from simulate nickel electrolyte.

A dynamic chitosan-based self-healing hydrogel with tunable morphology and its application as an isolating agent

A biopolymer chitosan based hydrogel with good transparency and rapid self-healing activity has been synthesized and utilized to get high purity separation of ¹⁵²Eu (T_1/2 = 13.33 a) and ¹³⁷Cs (T_1/2 = 30.17 a) employing SLX technique.

Synthesis of copolymer derived from tamarind kernel polysaccharide (TKP) and poly(methacrylic acid) via SI-ATRP with enhanced pH triggered dye removal

A novel copolymer derived from tamarind kernel polysaccharide (TKP) and poly(methacrylic) acid (g-TKP/pMA) has been successfully synthesised through surface initiated atom transfer radical polymerization (SI-ATRP).

Covalent Polyisobutylene-Paclitaxel Conjugates for Controlled Release from Potential Vascular Stent Coatings

The development of covalent polyisobutylene (PIB)-paclitaxel (PTX) conjugates as a potential approach to controlling drug release from vascular stent coatings is described. PIB-PTX materials containing ∼24 and ∼48 wt % PTX, conjugated via ester linkages, were prepared. The PTX release profiles were compared with those of physical mixtures of PTX with carboxylic acid-functionalized PIB and with the triblock copolymer polystyrene-b-PIB-b-polystyrene (SIBS). Covalent conjugation led to significantly slower drug release. Atomic force microscopy imaging of coatings of the materials suggested that the physical mixtures exhibited multiple domains corresponding to phase separation, whereas the materials in which PTX was covalently conjugated appeared homogeneous. Coatings of the conjugated materials on stainless steel surfaces suffered less surface erosion than the physically mixed materials, remained intact, and adhered well to the surface throughout the thirty-five day study. Tensile testing and rheological studies suggested that the incorporation of PTX into the polymer introduces similar physical changes to the PIB as the incorporation of a glassy polystyrene block does in SIBS. Cytotoxicity assays showed that the coatings did not release toxic levels of PTX or other species into a cell culture medium over a 24 h period, yet the levels of PTX in the materials were sufficient to prevent C2C12 cells from adhering to and proliferating on them. Overall, these results indicate that covalent PIB-PTX conjugates have promise as coatings for vascular stents.

Recent strategies to develop self-healable crosslinked polymeric networks

Autonomous self-healable crosslinked materials designed with built-in ability to repair physical damage and cracks can prevent catastrophic failure and thus extend the lifetime of materials.