Encapsulation of Hemin in Metal-Organic Frameworks for Catalyzing the Chemiluminescence Reaction of the H2O2-Luminol System and Detecting Glucose in the Neutral Condition

Bifunctional oxidase-peroxidase mimicking Fe-Ce MOF on paper-based analytical devices to intensify luminol chemiluminescence: Application for measuring different sugars with a smartphone readout

This study presents a potent paper-based analytical device (PAD) for quantifying various sugars using an innovative bi-nanozyme made from a 2-dimensional Fe/Ce metal-organic framework (FeCe-BTC). The MOF showed excellent bifunctional peroxidase-oxidase activities, efficiently catalyzing luminol's chemiluminescence (CL) reaction. As a peroxidase-like nanozyme, FeCe-BTC could facilitate the dissociation of hydrogen peroxide (H2O2) into hydroxyl radicals, which then oxidize luminol. Additionally, it was also discovered that when reacting with H2O2, the MOF turns into a mixed-valence MOF, and acts as an oxidase nanozyme. This activity is caused by the generated Ce4+ ions in the structure of MOF that can directly oxidize luminol. The MOF was directly synthesized on the PAD and cascaded with specific natural enzymes to establish simple, rapid, and selective CL sensors for the measurement of different sugars. A cell phone was also used to record light intensities, which were then correlated to the analyte concentration. The designed PAD showed a wide linear range of 0.1-10 mM for glucose, fructose, and sucrose, with detection limits of 0.03, 0.04, and 0.04 mM, respectively. It showed satisfactory results in food and biological samples with recovery values ranging from 95.8 to 102.4 %, which makes it a promising candidate for point-of-care (POC) testing for food control and medicinal purposes.

Highly sensitive SERS sensors for glucose detection based on enzyme@MOFs and ratiometric Raman

Diabetes is a common chronic metabolic disease. The frequent fluctuation of glucose is the main cause of most diabetes complications, which in turn causes harm to the health of patients. Surface-enhanced Raman scattering (SERS) spectroscopy has attracted much attention in the rapid detection of glucose due to its unique molecular fingerprinting ability, ultra-high sensitivity and fast response. However, due to the low affinity between glucose and SERS substrate, poor signal, susceptibility to complex environmental interference, and poor stability of SERS detection, it is still a challenge for SERS to accurately and sensitively determine glucose in complex environments. In this work, we encapsulated 4-mercaptobutyronitrile (4-MBN) as an internal standard (IS) in Au@Ag NRs inside and then Au@4-MBN@Ag NRs, Leucomalachite Green (LMG), glucose oxidase (GOx) and horseradish peroxidase (HPR) were encapsulated in ZIF-8 to prepare a tandem enzyme catalytic ratiometric SERS sensor Au@4-MBN@Ag@LMG@ZIF-8(GOx, HPR) for the detection of glucose in saliva. Because ZIF-8 enhanced the catalytic activity of the enzyme, the ability of glucose enrichment, and weakens the aggregation of Ag NRs. The internal standard signal molecule improves the accuracy and sensitivity of detection. The ratiometric Raman signal I412/I2233 of glucose has a good linear relationship with the concentration in the range of 0.1-100 μM, and the limit of detection (LOD) could be down to 0.03 μM. At the same time, it has excellent selectivity, repeatability and accuracy. The recovery rate of glucose in saliva is 96.50%-105.56 %, which proves the feasibility of the method. The Au@4-MBN@Ag@LMG@ZIF-8(GOx, HPR) sensor prepared in this study showed excellent SERS performance, which was able to detect glucose quickly, sensitively and accurately. This work provides a new strategy for the design of enzyme-catalyzed SERS sensors.

Recent progress of metal-organic framework-based nanozymes with oxidoreductase-like activity

Nanozymes, a class of synthetic nanomaterials possessing enzymatic catalytic properties, exhibit distinct advantages such as exceptional stability and cost-effectiveness. Among them, metal-organic framework (MOF)-based nanozymes have garnered significant attention due to their large specific surface area, tunable pore size and uniform structure. MOFs are porous crystalline materials bridged by inorganic metal ions/clusters and organic ligands, which hold immense potential in the fields of catalysis, sensors and drug carriers. The combination of MOFs with diverse nanomaterials gives rise to various types of MOF-based nanozyme, encompassing original MOFs, MOF-based nanozymes with chemical modifications, MOF-based composites and MOF derivatives. It is worth mentioning that the metal ions and organic ligands in MOFs are perfectly suited for designing oxidoreductase-like nanozymes. In this review, we intend to provide an overview of recent trends and progress in MOF-based nanozymes with oxidoreductase-like activity. Furthermore, the current obstacles and prospective outlook of MOF-based nanozymes are proposed and briefly discussed. This comprehensive analysis aims to facilitate progress in the development of novel MOF-based nanozymes with oxidoreductase-like activity while serving as a valuable reference for scientists engaged in related disciplines.

High sensitivity and automatic chemiluminescence detection of glucose and lactate using a spin-disc paper-based device

This paper reports a spin-disc paper-based device with 10 individual detection units containing electromagnetic modules controlling the sample incubation time before chemiluminescence (CL) signal detection. After the sample was added to the top paper chip and incubated with the enzyme, the electromagnet was turned off to allow contact between the top and bottom paper. The H2O2 generated by the sample flowed vertically to the bottom paper and initiated the oxidase of the luminol to generate the CL signal. After one detection the disc was automatically rotated to the next position to repeat the above detection. The advantage of using the device over the lateral flow and the in situ detection was firstly proved using the detection of H2O2 and the glucose/lactate sample with 5 minute incubation. The CL intensity was increased 300 times/1000 times as the glucose/lactate was incubated for 5 minutes compared to the non-incubated samples. Afterward, the device was employed to separately detect glucose and lactate diluted in PBS, artificial sweat, artificial saliva, and fresh cell culture media. Finally, the device was employed to detect the glucose and lactate in the media collected over the 24 hour culture of PC3 cells. The uptake and production rates of glucose and lactate were correspondingly determined as 0.328 ± 0.015 pmol h-1 per cell and 1.254 ± 0.053 pmol h-1 per cell, respectively. The reported device has wide application potential due to its capabilities in automatic detection of multiple samples with very high sensitivity and small sample volume (down to 0.5 μL).

Current advancements and prospects of enzymatic and non-enzymatic electrochemical glucose sensors

This review discusses the most current developments and future perspectives in enzymatic and non-enzymatic glucose sensors, which have notably evolved over the preceding quadrennial period. Furthermore, a thorough exploration encompassed the sensor's intricate fabrication processes, the diverse range of materials employed, the underlying principles of detection, and an in-depth assessment of the sensors' efficacy in detecting glucose levels within essential bodily fluids such as human blood serums, urine, saliva, and interstitial fluids. It is worth noting that the accurate quantification of glucose concentrations within human blood has been effectively achieved by utilizing classical enzymatic sensors harmoniously integrated with optical and electrochemical transduction mechanisms. Monitoring glucose levels in various mediums has attracted exceptional attention from industrial to academic researchers for diabetes management, food quality control, clinical medicine, and bioprocess inspection. There has been an enormous demand for the creation of novel glucose sensors over the past ten years. Research has primarily concentrated on succeeding biocompatible and enhanced sensing abilities related to the present technologies, offering innovative avenues for more effective glucose sensors. Recent developments in wearable optical and electrochemical sensors with low cost, high stability, point-of-care testing, and online tracking of glucose concentration levels in biological fluids can aid in managing and controlling diabetes globally. New nanomaterials and biomolecules that can be used in electrochemical sensor systems to identify glucose concentration levels are developed thanks to advances in nanoscience and nanotechnology. Both enzymatic and non-enzymatic glucose electrochemical sensors have garnered much interest recently and have made significant strides in detecting glucose levels. In this review, we summarise several categories of non-enzymatic glucose sensor materials, including composites, non-precious transition metals and their metal oxides, hydroxides, precious metals and their alloys, carbon-based materials, conducting polymers, metal-organic framework (MOF)-based electrocatalysts, and wearable device-based glucose sensors deeply.

Room-Temperature Synthesized Iron/Cobalt Metal-Organic Framework Nanosheets with Highly Efficient Catalytic Activity toward Luminol Chemiluminescence Reaction

Two-dimensional (2D) iron/cobalt metal-organic framework nanosheets (Fe/Co-MOF NSs) were synthesized via the cooperative self-assembly reaction of Fe3+/Co2+ and terephthalic acid at room temperature. The as-prepared 2D Fe/Co-MOF NSs display superior performance in catalysis of the chemiluminescence (CL) reaction between luminol and H2O2. The CL spectrum, UV-vis absorption spectroscopy, radical scavenger experiments, and electron spin resonance (ESR) spectroscopy are utilized to research the possible CL mechanism of the luminol-H2O2-Fe/Co-MOF NSs system. All results indicate that Fe/Co-MOF NSs present outstanding peroxidase-like activity and could catalyze H2O2 to produce 1O2, O2·-, and ·OH, which could react rapidly with the luminol anion radical and result in strong CL. With the highly efficient CL of the luminol-H2O2-Fe/Co-MOF NSs system, a sensitive sensor for the detection of dopamine (DA) is developed based on the inhibitory effect of DA on the CL intensity. Good linearity over the range of 50-800 nM is achieved with a limit of detection of 20.88 nM (S/N = 3). This research demonstrates that 2D Fe/Co-MOF NSs is a highly effective catalyst for luminol CL reaction and has great application potential in the CL field.

Optimization and Enhancement of the Peroxidase-like Activity of Hemin in Aqueous Solutions of Sodium Dodecylsulfate

Iron porphyrins play several important roles in present-day living systems and probably already existed in very early life forms. Hemin (= ferric protoporphyrin IX = ferric heme b), for example, is the prosthetic group at the active site of heme peroxidases, catalyzing the oxidation of a number of different types of reducing substrates after hemin is first oxidized by hydrogen peroxide as the oxidizing substrate of the enzyme. The active site of heme peroxidases consists of a hydrophobic pocket in which hemin is embedded noncovalently and kept in place through coordination of the iron atom to a proximal histidine side chain of the protein. It is this partially hydrophobic local environment of the enzyme which determines the efficiency with which the sequential reactions of the oxidizing and reducing substrates proceed at the active site. Free hemin, which has been separated from the protein moiety of heme peroxidases, is known to aggregate in an aqueous solution and exhibits low catalytic activity. Based on previous reports on the use of surfactant micelles to solubilize free hemin in a nonaggregated state, the peroxidase-like activity of hemin in the presence of sodium dodecyl sulfate (SDS) at concentrations below and above the critical concentration for SDS micelle formation (critical micellization concentration (cmc)) was systematically investigated. In most experiments, 3,3',5,5'-tetramethylbenzidine (TMB) was applied as a reducing substrate at pH = 7.2. The presence of SDS clearly had a positive effect on the reaction in terms of initial reaction rate and reaction yield, even at concentrations below the cmc. The highest activity correlated with the cmc value, as demonstrated for reactions at three different HEPES concentrations. The 4-(2-hydroxyethyl)-1-piperazineethanesulfonate salt (HEPES) served as a pH buffer substance and also had an accelerating effect on the reaction. At the cmc, the addition of l-histidine (l-His) resulted in a further concentration-dependent increase in the peroxidase-like activity of hemin until a maximal effect was reached at an optimal l-His concentration, probably corresponding to an ideal mono-l-His ligation to hemin. Some of the results obtained can be understood on the basis of molecular dynamics simulations, which indicated the existence of intermolecular interactions between hemin and HEPES and between hemin and SDS. Preliminary experiments with SDS/dodecanol vesicles at pH = 7.2 showed that in the presence of the vesicles, hemin exhibited similar peroxidase-like activity as in the case of SDS micelles. This supports the hypothesis that micelle- or vesicle-associated ferric or ferrous iron porphyrins may have played a role as primitive catalysts in membranous prebiotic compartment systems before cellular life emerged.

A new formulation of Ni/Zn bi-metallic nanocomposite and evaluation of its applications for pollution removal, photocatalytic, electrochemical sensing, and anti-breast cancer

Nanocomposites have gained attention due to their variety of applications in different fields. In this research, we have reported a green synthesis of a bi-metallic nanocomposite of nickel and zinc using an aqueous extract of Citrus sinensis in the presence of chitosan (Ni/Zn@orange/chitosan). The nanocomposite was characterized using different techniques. We have examined various applications for Ni/Zn@orange/chitosan. The NPs were manufactured in spherical morphology with a particle range size of 17.34-90.51 nm. Ni/Zn@orange/chitosan showed an acceptable ability to remove dyes of Congo red and methyl orange from an aqueous solution after 80 min furthermore, it uptaking the drug mefenamic acid from a solution. Ni/Zn@orange/chitosan also exhibited great photocatalytic activity in synthesizing benzimidazole using benzyl alcohol and o-phenylenediamine. Ni/Zn@orange/chitosan was found as a potent electrochemical sensor to determine glucose. In the molecular and cellular section of the current research, the cells with composite nanoparticles were studied by MTT way about the anti-breast adenocarcinoma potentials malignant cell lines. The IC50 of composite nanoparticles were 320, 460, 328, 500, 325, 379, 350, and 396 μg/mL concering RBA, NMU, SK-BR-3, CAMA-1, MCF7, AU565, MDA-MB-468, and Hs 281.T breast adenocarcinoma cell lines, respectively. The results revealed the newly synthesized nanocomposite is a potent photocatalyst, dye pollution removal agent, and an acceptable new drug to treat breast cancer.

Hierarchically Structured and Highly Dispersible MOF Nanozymes Combining Self-Assembly and Biomineralization for Sensitive and Persistent Chemiluminescence Immunoassay

Metal-organic frameworks (MOF) are promising candidates for the construction of artificial nanozymes and have found applications in many fields. However, the preparation of nanosized MOF materials with high performance and good dispersibility is still a big challenge and is in great demand as signal labels for immunoassays. In this work, hierarchically structured and highly dispersible MOF nanoparticles were facilely prepared in a one-pot method. Self-assembled micelles from PEGylated hematin were used as structured templates to mediate the formation of zeolitic imidazole framework-8 (ZIF-8) nanoparticles in aqueous solution. The encapsulation of micelles in ZIF-8 frameworks produces well-dispersed nanoparticles and generates dual-confinement effects for catalytic hematin. Owing to the hierarchical structures, the formed MOF nanozymes show enhanced peroxidase-like activity and enable persistent chemiluminescence behaviors for the luminol system. Sandwich-type chemiluminescence immunoassays for carcinoembryonic antigen (CEA) were proposed using MOF nanozymes as signal labels, and good analytical performances were achieved. The combination of self-assembly and biomineralization may open new avenues for the development of MOF nanomaterials.

Bioinspired Framework Catalysts: From Enzyme Immobilization to Biomimetic Catalysis

Enzymatic catalysis has fueled considerable interest from chemists due to its high efficiency and selectivity. However, the structural complexity and vulnerability hamper the application potentials of enzymes. Driven by the practical demand for chemical conversion, there is a long-sought quest for bioinspired catalysts reproducing and even surpassing the functions of natural enzymes. As nanoporous materials with high surface areas and crystallinity, metal-organic frameworks (MOFs) represent an exquisite case of how natural enzymes and their active sites are integrated into porous solids, affording bioinspired heterogeneous catalysts with superior stability and customizable structures. In this review, we comprehensively summarize the advances of bioinspired MOFs for catalysis, discuss the design principle of various MOF-based catalysts, such as MOF-enzyme composites and MOFs embedded with active sites, and explore the utility of these catalysts in different reactions. The advantages of MOFs as enzyme mimetics are also highlighted, including confinement, templating effects, and functionality, in comparison with homogeneous supramolecular catalysts. A perspective is provided to discuss potential solutions addressing current challenges in MOF catalysis.

Rational design of mesoporous chiral MOFs as reactive pockets in nanochannels for enzyme-free identification of monosaccharide enantiomers

Monosaccharides play significant roles in daily metabolism in living organisms. Although various devices have been constructed for monosaccharide identification, most rely on the specificity of the natural enzyme. Herein, inspired by natural ionic channels, an asymmetrical MOF-in-nanochannel architecture is developed to discriminate monosaccharide enantiomers based on cascade reactions by combining oxidase-mimicking and Fenton-like catalysis in homochiral mesoporous CuMOF pockets. The identification performance is remarkably enhanced by the increased oxidase-mimicking activity of Au nanoparticles under a local surface plasmon resonance (LSPR) excitation. The apparent steady-state kinetic parameters and nano-fluidic simulation indicate that the different affinities induced by Au-LSPR excitation and the confinement effect from MOF pockets precipitate the high chiral sensitivity. This study offers a promising strategy for designing an enantiomer discrimination device and helps to gain insight into the origin of stereoselectivity in a natural enzyme.

A copper foam-based surface-enhanced Raman scattering substrate for glucose detection

Raman spectroscopy can quickly achieve non-destructive, qualitative and quantitative detection, and analysis the molecular structure of substances. Herein, a facile and low-cost method for preparation of highly sensitivity SERS substrates was implemented through the displacement reaction of copper foam immersed in AgNO₃ ethanol solution. Due to the 3D structure of copper film and homogenous displacement, the Ag-Cu substrate showed high performance SERS enhancement (1.25 × 10⁷), and the lowest detection concentration for R6G reached 10^-10 Mol/L. For glucose detection, mixed decanethiol (DT)/mercaptohexanol (MH) interlayer was used to enable glucose attach to the substrate surface, and the limit of detection reached to 1 uM/L. SERS substrate makes the Ag-Cu SERS substrate promising for biological applications.

A Double Hemin Bonded G-Quadruplex Embedded in Metal-Organic Frameworks for Biomimetic Cascade Reaction

Biocatalytic transformations in living cells, such as enzymatic cascades, function effectively in spatially confined microenvironments. However, mimicking enzyme catalytic cascade processes is challenging. Herein, we report a new dual-Hemin-G-quadruplex (dHemin-G4) DNAzyme with high catalytic activity over noncovalent G4/Hemin and monocovalent counterparts (G4-Hemin and Hemin-G4) by covalently linking hemin to both ends of an intramolecular G4. We use MAF-7, a hydrophilic metal-organic framework (MOF), as the protecting scaffold to integrate a biocatalytic cascade consisting of dHemin-G4 DNAzyme and glucose oxidase (GOx), by a simple and mild method with a single-step encapsulation of both enzymes. Such a MAF-7-confined cascade system shows superior activity over not only traditional G4/Hemin but also other MOFs (ZIF-8 and ZIF-90), which was mainly attributed to high-payload enzyme packaging. Notably, the introduction of hydrophilic G4 allows to avoid the accumulation of hydrophobic hemin on the surface of MAF-7, which decreases cascade biocatalytic activity. Furthermore, MAF-7 as protective coatings endowed the enzyme with excellent recyclability and good operational stability in harsh environments, including elevated temperature, urea, protease, and organic solvents, extending its practical application in biocatalysis. In addition, the incorporated enzymes can be replaced on demand to broaden the scope of catalytic substrates. Taking advantages of these features, the feasibility of dHemin-G4/GOx@MAF-7 systems for biosensing was demonstrated. This study is conducive to devise efficient and stable enzyme catalytic cascades to facilitate applications in biosensing and industrial processes.

Preparation of novel HKUST-1-glucose oxidase composites and their application in biosensing

Copper-based metal-organic frameworks (MOF) and multi-walled carbon nanotubes (HKUST-1-MWCNTs) composite were synthesized by one-step hydrothermal method, and PDA-enzyme-HKUST-1-MWCNTs composite was prepared by one-pot method for the construction of glucose biosensors, which realized the sensitive amperometric detection of glucose at 0.7 V (vs. SCE). The sensitivity of the sensor for glucose detection was 178 μA mM^-1cm^-2 in the wide linear range of 0.005 ~ 7.05 mM, the detection limit was 0.12 μM and the corresponding RSD was 3.8%. Its high performance is mainly benefitted from the high porosity and large specific surface area of HKUST-1, the good conductivity of MWCNTs, and the excellent adhesion and dispersion of PDA. The strategy of combining PDA and MWCNTs to improve the dispersion and conductivity of MOF is expected to achieve a wider application of MOF-based materials in the electrochemical biosensing field.

Glucose detection through surface-enhanced Raman spectroscopy: A review

Glucose detection is of vital importance to diabetes diagnosis and treatment. Optical approaches in glucose sensing have received much attention in recent years due to the relatively low cost, portable, and mini-invasive or non-invasive potentials. Surface enhanced Raman spectroscopy (SERS) endows the benefits of extremely high sensitivity because of enhanced signals and specificity due to the fingerprint of molecules of interest. However, the direct detection of glucose through SERS was challenging because of poor adsorption of glucose on bare metals and low cross section of glucose. In order to address these challenges, several approaches were proposed and utilized for glucose detection through SERS. This review article mainly focuses on the development of surface enhanced Raman scattering based glucose sensors in recent 10 years. The sensing mechanisms, rational design and sensing properties to glucose are reviewed. Two strategies are summarized as intrinsic sensing and extrinsic sensing. Four general categories for glucose sensing through SERS are discussed including SERS active platform, partition layer functionalized surface, boronic acid based sensors, and enzymatic reaction based biosensors. Finally, the challenges and outlook for SERS based glucose sensors are also presented.

Explaining chemical clues of metal organic framework-nanozyme nano-/micro-motors in targeted treatment of cancers: benchmarks and challenges

Nowadays, nano-/micro-motors are considered as powerful tools in different areas ranging from cleaning all types of contaminants, to development of Targeted drug delivery systems and diagnostic activities. Therefore, the development and application of nano-/micro-motors based on metal–organic frameworks with nanozyme activity (abbreviated as: MOF-NZs) in biomedical activities have received much interest recently. Therefore, after investigating the catalytic properties and applications of MOF-NZs in the treatment of cancer, this study intends to point out their key role in the production of biocompatible nano-/micro-motors. Since reducing the toxicity of MOF-NZ nano-/micro-motors can pave the way for medical activities, this article examines the methods of making biocompatible nanomotors to address the benefits and drawbacks of the required propellants. In the following, an analysis of the amplified directional motion of MOF-NZ nano-/micro-motors under physiological conditions is presented, which can improve the motor behaviors in the propulsion function, conductivity, targeting, drug release, and possible elimination. Meanwhile, by explaining the use of MOF-NZ nano-/micro-motors in the treatment of cancer through the possible synergy of nanomotors with different therapies, it was revealed that MOF-NZ nano-/micro-motors can be effective in the treatment of cancer. Ultimately, by analyzing the potential challenges of MOF-NZ nano-/micro-motors in the treatment of cancers, we hope to encourage researchers to develop MOF-NZs-based nanomotors, in addition to opening up new ideas to address ongoing problems.

Light amplified oxidative stress in tumor microenvironment by carbonized hemin nanoparticles for boosting photodynamic anticancer therapy

Photodynamic therapy (PDT), which utilizes light excite photosensitizers (PSs) to generate reactive oxygen species (ROS) and consequently ablate cancer cells or diseased tissue, has attracted a great deal of attention in the last decades due to its unique advantages. However, the advancement of PDT is restricted by the inherent characteristics of PS and tumor microenvironment (TME). It is urgent to explore high-performance PSs with TME regulation capability and subsequently improve the therapeutic outcomes. Herein, we reported a newly engineered PS of polymer encapsulated carbonized hemin nanoparticles (P-CHNPs) via a facile synthesis procedure for boosting photodynamic anticancer therapy. Solvothermal treatment of hemin enabled the synthesized P-CHNPs to enhance oxidative stress in TME, which could be further amplified under light irradiation. Excellent in vitro and in vivo PDT effects were achieved due to the improved ROS (hydroxyl radicals and singlet oxygen) generation efficiency, hypoxia relief, and glutathione depletion. Moreover, the superior in vitro and in vivo biocompatibility and boosted PDT effect make the P-CHNPs a potential therapeutic agent for future translational research.

High-activity daisy-like zeolitic imidazolate framework-67/reduced grapheme oxide-based colorimetric biosensor for sensitive detection of hydrogen peroxide

Colorimetric biosensors, based on enzyme-like nanomaterials, have come into the spotlight in virtue of their visual detection. Herein, a daisy-like zeolitic imidazolate framework-67/reduced grapheme oxide (ZIF-67/rGO) nanozyme with unique 3D hierarchical structures has been designed to realize visual detection of hydrogen peroxide (H₂O₂) that is recognized as a strong oxidizing agent or reactive oxygen species associated with oxidative stress in biological systems. The daisy-like ZIF-67/rGO is prepared by a facile one-step liquid-phase method conducted under room temperature. The successful introduction of rGO endows the daisy-like ZIF-67/rGO nanozyme with abundant porous structure, high specific surface area, and good charge transfer capability, which significantly accelerates the adsorbability and recognition towards the substrates and the oxidation rate of TMB-H₂O₂ reaction, and thus improving the nanozyme activity observably. It is conductive to nanozyme-modulated H₂O₂ determination. The established colorimetric biosensor platform based on ZIF-67/rGO nanozyme exhibits remarkable sensitivity and high specificity for the application in visual detection of H₂O₂. The detection limit of ZIF-67/rGO-based biosensor platform is as low as 3.81 μM, which is nearly 8 times lower than that of ZIF-67-based biosensor platform. Moreover, its potential applicability as an ideal platform for colorimetric biosensors is demonstrated by testing the concentration of H₂O₂ in milk samples, which sheds light on the promising application of the proposed biosensing system in point-of-care detection.

Chemiluminescent Two-Dimensional Metal-Organic Framework with Multiple Metal Catalytic Centers and Its Peroxidase-like Activity for Sensing of Small Molecules

Two-dimensional (2D) porphyrin-based metal-organic frameworks (MOFs) hold great promise in a variety of areas with the merits of large lateral size and abundant functional groups. The chemiluminescent 2D MOF has rarely been reported. In this work, a chemiluminescence (CL) reagent and noble metal nanoparticle dual-functionalized 2D MOF (ABEI/AuNPs/CuTCPP) was developed through the surfactant-assisted and in situ synthetic growth method, exhibiting strong and stable CL property and outstanding peroxidase-mimicking activity. The special nanostructure of ABEI/AuNPs/CuTCPP endowed it with multi-catalytic routes in the CL reaction, which showed a unique pH-regulated and time-resolved CL kinetic curve. A CL mechanism with multi-catalytic centers has been proposed. AuNPs participated in the fast catalytic process and CuTCPP in the slow and strong catalytic reaction. Owing to the impressive structural features and intrinsic enzymatic tandem reaction from natural enzyme to artificial enzyme, a model biosensor was designed for the detection of small metabolic molecules. Employing choline as a model target, the proposed biosensor showed a highly sensitive response to choline in the linear range from 0.3 to 300 μM with a detection limit of 82.6 nM. Significantly, the strategy may be generalized to the monitoring of other biologically important compounds involved in the production of H₂O₂.

Natural catalyst for Luminol chemiluminesence - Application to validate peroxide levels in commercial hair dyes

Herein, we report hydrothermally treated green leaves (Moringa Oleifera) extract exploited as an efficient and highly-sensitive catalyst to catalyse the Chemiluminescence (CL) reaction of luminol. In the absence of enhancer, this green and hydrothermally treated catalyst (GHT) was found to significantly enhance the CL intensity about 3.5 fold as compared to the traditionally used K₃ Fe(CN)₆ catalyst. The structure and surface morphology of the catalyst was elucidated by XPS, SEM, XRD and Raman spectroscopy. The synergistic effect of the catalyst in the CL reaction was systematically investigated in the presence of hydrogen peroxide using UV Visible and chemiluminesence spectroscopy. Studies show that the sensitivity of the catalyst could be amplified by adjusting several parameters such as pH of the medium, concentrations of the base and luminol. The sensitivity of the novel-type catalyst was examined through the validation of hydrogen peroxide levels in the commercial hair dye samples. Remarkably, the catalyst displayed ultra-sensitivity to hydrogen peroxide as the limit of detection (LOD) of H₂ O₂ using this catalyst is determined to be 0.02 μM under optimized conditions. In general, the proposed inexpensive, eco-friendly, and non-toxic catalyst could enable the determination of the hydrogen peroxide for diverse analytical applications.

A FeS2NPs-Luminol-MnO2NSs system based on chemiluminescence resonance energy transfer platform for sensing glutathione

In this work, ferrous disulfide nanoparticles (FeS₂NPs) with oxidase properties were synthesized, and a FeS₂NPs-Luminol-MnO₂ nanosheets (MnO₂NSs) chemiluminescence resonance energy transfer (CRET) system was successfully established. Because of reaction with MnO₂NSs, glutathione (GSH) can inhibit CRET between Luminol and MnO₂NSs and recover the luminescence intensity of FeS₂NPs-Luminol. Consequently, we developed a GSH sensor based on this chemiluminescence resonance energy transfer (CRET) system. Under optimal conditions, the FeS₂NPs-Luminol-MnO₂NSs sensing system showed very sensitive response to GSH in the range of 1 μM-500 μM. The limit of detection of GSH reached as low as 0.15 μM. Finally, the sensor was successfully used for the detection of GSH in serum.

Glucose oxidase@zinc-doped zeolitic imidazolate framework-67 as an effective cascade catalyst for one-step chemiluminescence sensing of glucose

A chemiluminescence (CL) sensor was constructed for the one-step determination of glucose. Glucose oxidase (GOx) was successfully encapsulated into Zn-doped zeolitic imidazolate framework-67 (Zn-ZIF-67) via a simple one-pot strategy. The as-prepared GOx@Zn-ZIF-67 nanocomposite can trigger cascade reactions of glucose oxidation to generate H₂O₂ and H₂O₂-mediated luminol reaction to give an intense CL emission. The sensor responds linearly to glucose in the 20.0-400.0 μmol·L^-1 range with a limit of detection (LOD) of 4.7 μmol·L^-1. Eleven replicated measurements of 200.0 μmol·L^-1 glucose solution gives a relative standard deviation (RSD) of 1.7%. The sensor exhibits good selectivity and stability and was successfully applied to the determination of glucose in real human serum samples. Schematic representation of one-step determination of serum glucose with GOx@Zn-ZIF-67 nanocomposite triggering cascade reactions between luminol and glucose.

Recent progress in the design of analytical methods based on nanozymes

Nanomaterials with intrinsic enzyme-like properties (nanozymes) have attracted growing interest owing to their striking merits over the traditional enzymes, such as low cost, easy surface modification, high stability and robustness, and tunable activity. These features enable them to be considered as a potent substitute for natural enzymes to construct novel analytical platforms to detect various analytes from small molecules to proteins and cells. In this review, we focus on recent advances in the design strategies using nanozyme catalytic mediated signal amplification for sensing applications. The progress of nanozyme-based analytical systems in the detection of different types of analytes, including ions, small biomolecules, biomacromolecules and others, is summarized. Furthermore, the future challenges and opportunities of nanozyme-based analytical methods are discussed.

The electrochemiluminescence coreactant accelerator of metal-organic frameworks grafted with N-(aminobutyl)-N-(ethylisoluminol) for the ultrasensitive detection of chloramphenicol

In this work, metal-organic frameworks (MOFs) are utilized as effective ECL coreactant accelerator to enhance the ECL responses of N-(aminobutyl)-N-(ethylisoluminol) (ABEI). Zn-based MOFs (MOF-Zn-1) were prepared by chelating Zn ions with melamine and thiophenedicarboxylic acid (TPDA), which observably accelerated the electrocatalytic oxidation of tripropylamine (TPA). Then, ABEI-MOF-Zn-1 as a high-performance ECL emitter was synthesized via an amide reaction between ABEI and mercaptopropionic acid (MPA) modified MOF-Zn-1. Strikingly, the ABEI-MOF-Zn-1 showed the 18-fold increase in the ECL signals relative to pure ABEI by using TPA as a coreactant. Moreover, ferrocene (Fc) as a quencher was first linked with capture DNA (cDNA), and then used to modify the ABEI-MOF-Zn-1, thereby constructing a label-free ECL biosensor. After the linkage between chloramphenicol (CAP) and aptamer DNA (aptDNA), the ECL response was definitely recovered by releasing L-DNA from double-stranded DNA (dsDNA, hybridization of aptDNA and L-DNA). The resultant sensor showed a wide linear range of 1.00 nM-0.10 mM (R² = 0.99) and a low limit of detection (LOD) down to 0.11 nM for detecting CAP. This work developed a novel pattern to design an efficient ECL enhanced emitter, coupled by expanding its potential applications in clinical diagnosis.

Cu-MOF/hemin: a bionic enzyme with excellent dispersity for the determination of hydrogen peroxide released from living cells

The stability, repeatability and sensitivity of an electrochemical biosensor material are closely connected with the dispersibility of metal organic frameworks (MOFs) in aqueous media. Herein, a nanocomposite based on Cu-MOF/hemin, which is not only highly water-soluble but also simple and efficient in synthesis, was used for the construction of a non-enzymatic sensor to detect hydrogen peroxide (H₂O₂). The Cu-MOF/hemin was characterized via scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS)-mapping, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and thermal gravimetric analysis (TGA), which indicate that hemin and the Cu-MOF were successfully combined. As a H₂O₂ electrochemical biomimetic enzyme, the Cu-MOF/hemin exhibited excellent electrocatalytic performance, which was confirmed by the electrochemical experiments and chromogenic reactions, and the possible mechanism of the reactions has been deduced. The electrochemical sensor based on the biomimetic enzyme exhibited an extended linear detection range from 0.01-5.0 mM (R = 0.998), low detection limit of 4.14 μM, and high selectivity and stability under the optimized conditions. More importantly, the practical application ability of the sensor was verified by the test of H₂O₂ in human serum samples and it could be used for the real-time detection of H₂O₂ released from living cells with satisfactory results. Therefore, this novel nanocomposite has certain potential in preparing electrochemical sensing platforms for nonenzymatic biosensing and provides a new method for clinical diagnosis and real-time monitoring.

Controlled synthesis of metal-organic frameworks with skeletal and pore-filling iron(III) porphyrins for electrochemical oxygen reduction

Electrocatalysts derived from porphyrinic metal-organic frameworks (MOFs) have exhibited very promising electrochemical performances toward oxygen reduction reaction (ORR). Nevertheless, porphyrinic MOFs have been limited to skeleton- or the pore-modified ones mostly by Fe porphyrin (FeP), which only provide insufficient ORR active sites. Herein, we report controlled synthesis of PCN-222 decorated by both pore-filling Hemin and skeletal iron(III) meso-tetra(4-carboxyphenyl) porphyrin (Fe[Formula: see text]TCPP) that partially substitutes original backbone TCPP. Subsequent pyrolysis of the composite PCN-222 led to the synthesis of nanorod electrocatalysts with atomically dispersed Fe-N-C sites, which exhibit efficient activity and durability toward ORR in both alkaline and acidic media. Moreover, it appears that the atomically dispersed Fe-N-C sites might possess a distorted octahedral configuration of (O/N)2-Fe[Formula: see text]-N4 as evidenced by extended X-ray absorption fine structure spectra (EXAFS), aberration-corrected high-angle annular dark-field scanning transmission electron microscope (HAADF-STEM), and X-ray photoelectron spectroscopy (XPS). To the best of our knowledge, controlled modification to both the skeleton and the pore of MOFs with FeP for the synthesis of Fe-N-C electrocatalysts has not been reported prior to this study. This study offers a new avenue to manipulate the density of Fe-N-C sites of electrocatalysts, which may be applied to other composite MOFs with various functionalities.

Construction of Peroxidase-like Metal-Organic Frameworks in TiO2 Nanochannels: Robust Free-Standing Membranes for Diverse Target Sensing

The high cost and easy denaturation of natural enzymes under environmental conditions hinder their practical usefulness in sensing devices. In this study, peroxidase (POD)-like metal-organic frameworks (MOFs) were in situ grown in the nanochannels of an anodized TiO₂ membrane (TiO₂NM) as an electrochemical platform for multitarget sensing. By directly using a nanochannel wall as the precursor of metal nodes, Ti-MOFs were in situ derived on the nanochannel wall. Benefitting from the presence of bipyridine groups on the ligands, the MOFs in the nanochannels provide plenty of sites for Fe³⁺ anchoring, thus endowing the resulting membrane (named as Fe³⁺:MOFs/TiO₂NM) with remarkable POD-like activity. Such Fe³⁺-induced POD-like activity is very sensitive to thiol-containing molecules owing to the strong coordination effect of thiols on Fe³⁺. Most importantly, the POD-like activity of nanochannels can be in situ characterized by the current-potential (I-V) properties via catalyzing the oxidation of 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) substrate to the corresponding positively charged product ABTS^•+. As a proof-of-concept application, the free-standing POD-like membranes were applied as a label-free assay in sensing cysteine, as well as monitoring acetylcholinesterase (AChE) activity through the generated thiol-containing product. Furthermore, based on the toxicity effect of organophosphorus (OP) compounds on AChE, the robust membranes were successfully utilized to evaluate the toxicity of diverse OP compounds. The POD-like nanochannels open up an innovative way to expand the application of nanochannel-based electrochemical sensing platforms in drug inspection, food safety, and environmental pollution.

On paper synthesis of metal-organic framework as a chemiluminescence enhancer for estimating the total phenolic content of food samples using a smartphone readout

Herein, a novel paper-based chemiluminescence (CL) assay is reported using a smartphone readout for on-site and reliable analytical applications. The CL system was based on the high-performance improving effect of cobalt-imidazole metal-organic framework (CoMOF) on luminol-hydrogen peroxide (H₂O₂) CL emission. The CoMOF was grown on paper and used as a support for the CL reaction, which led to an intense CL emission and good reproducibility. More importantly, the stability of luminol, as the CL reagent, was greatly improved in the presence of CoMOF. This high stability, along with the high-yield CL emission, makes the device highly suitable for commercialization. Furthermore, using a smartphone as the detector for the developed device made the process easier and more accessible for public usage. In this work, the new paper-based CL smartphone device was used for the detection of the total phenolic content of food samples. Phenolic compounds (PC) are hydroxyl radical scavengers that can effectively quench the CL emission of the luminol-H₂O₂-CoMOF system. After optimizing the reaction conditions, the system could detect PC at the μg mL^-1 level. Detection limits of 0.12, 0.28, 0.46, 0.85, and 1.23 μg mL^-1 were obtained for gallic acid, quercetin, catechin, kaempferol, and caffeic acid, respectively. This work is the first report on the practical application of smartphone CL assays for the estimation of PC. The proposed assay is an easy-to-use, low-cost, portable, and suitable assay for on-site screening purposes.

Pt Nanoparticles Anchored on NH2-MIL-101 with Efficient Peroxidase-Like Activity for Colorimetric Detection of Dopamine

Dopamine (DA) is an important catecholamine neurotransmitter that plays a highly relevant role in regulating the central nervous system, and abnormal DA content can cause many immune-related diseases. Hence, it is of significance to sensitively and specifically identify DA for clinical medicine. In this work, Pt/NH2-MIL-101 hybrid nanozymes with bimetallic catalytic centers were fabricated by forming coordinate bonds between Pt nanoparticles (Pt NPs) and –NH2 on metal–organic frameworks (MOF). The catalytic activity of Pt/NH2-MIL-101 was increased by 1.5 times via enlarging the exposure of more active sites and improving the activity of the active sites through the strategy of forming bimetallic catalytic centers. In the presence of DA, competing with 3, 3′, 5, 5′-tetramethylbenzidine (TMB) for the generated hydroxyl radicals (•OH), the blue oxidation state TMB (Ox-TMB) is reduced to colorless TMB, showing dramatic color changes. The Pt/NH2-MIL-101-based colorimetric assay enables the sensitive and robust detection of DA molecules with a detection limit of only 0.42 μM and has an observable potential in clinical applications.

Metal-Organic Frameworks Enhance Biomimetic Cascade Catalysis for Biosensing

Multiple enzymes-induced biological cascade catalysis guides efficient and selective substrate transformations in vivo. The biomimetic cascade systems, as ingenious strategies for signal transduction and amplification, have a wide range of applications in biosensing. However, the fragile nature of enzymes greatly limits their wide applications. In this regard, metal-organic frameworks (MOFs) with porous structures, unique nano/microenvironments, and good biocompatibility have been skillfully used as carriers to immobilize enzymes for shielding them against hash surroundings and improving the catalytic efficiency. For another, nanomaterials with enzyme-like properties and brilliant stabilities (nanozymes), have been widely applied to ameliorate the low stability of the enzymes. Inheriting the abovementioned merits of MOFs, the performances of MOFs-immboilized nanozymes could be significantly enhanced. Furthermore, in addition to carriers, some MOFs can also serve as nanozymes, expanding their applications in cascade systems. Herein, recent advances in the fabrication of efficient MOFs-involving enzymes/nanozymes cascade systems and biosensing applications are highlighted. Integrating diversified signal output modes, including colorimetry, electrochemistry, fluorescence, chemiluminescence, and surface-enhanced Raman scattering, sensitive detection of various targets (including biological molecules, environmental pollutants, enzyme activities, and so on) are realized. Finally, challenges and opportunities about further constructions and applications of MOFs-involving cascade reaction systems are briefly put forward.

Cobalt-imidazole metal-organic framework loaded with luminol for paper-based chemiluminescence detection of catechol with use of a smartphone

Chemiluminescence (CL) reagent luminol was loaded into the porous structure of cobalt-imidazole metal-organic framework (MOF) ZIF-67 to obtain luminol-functionalized ZIF-67 (luminol@ZIF-67) with CL property. The morphology, composition, CL property, and CL mechanism of luminol@ZIF-67 were carefully investigated. The obtained luminol@ZIF-67 exhibited strong, stable, and visible CL emission that reacted with H₂O₂, attributed to the strong catalytic effect of ZIF-67 combined with the shortened diffusion distance between luminol and the catalytic center. The CL intensity of luminol@ZIF-67 was more than 550 times higher than that of luminol. Catechol can effectively quench the CL emission of luminol@ZIF-67 that reacted with H₂O₂. Then, a simple paper-based CL imaging detection method was developed for the detection of catechol by using a smartphone as a portable detector. The linear calibration curve of the developed CL assay for catechol ranged from 5 to 100 mg/L with detection limit of 1.1 mg/L (S/N = 3δ). The strong CL emission of luminol@ZIF-67 combined with the effective quench ability of catechol guaranteed high sensitivity of the detection method. The practical application ability of the developed CL assay was tested by the determination of catechol in tea and tap water samples, resulting in acceptable results. This work provides an effective paper-based CL detection method for catechol and enriches the species of the chemiluminescent MOF material.

Porphyrin-Based Metal-Organic Frameworks for Biomedical Applications

Porphyrins and porphyrin derivatives have been widely explored for various applications owing to their excellent photophysical and electrochemical properties. However, inherent shortcomings, such as instability and self-quenching under physiological conditions, limit their biomedical applications. In recent years, metal-organic frameworks (MOFs) have received increasing attention. The construction of porphyrin-based MOFs by introducing porphyrin molecules into MOFs or using porphyrins as organic linkers to form MOFs can combine the unique features of porphyrins and MOFs as well as overcome the limitations of porphyrins. This Review summarizes important synthesis strategies for porphyrin-based MOFs including porphyrin@MOFs, porphyrinic MOFs, and composite porphyrinic MOFs, and highlights recent achievements and progress in the development of porphyrin-based MOFs for biomedical applications in tumor therapy and biosensing. Finally, the challenges and prospects presented by this class of emerging materials for biomedical applications are discussed.

ROS-responsive probes for low-background optical imaging: a review

Optical imaging is a facile tool for visualizing biological processes and disease progression, but its image quality is largely limited by light-induced autofluorescence or background signals. To overcome this issue, low-background optical-imaging techniques including chemiluminescence imaging, afterglow imaging and photoacoustic imaging have been developed, based on their unique working mechanisms, which are: the detection of light emissions from chemical reactions, the cessation of light excitation before signal collection, and the detection of ultrasonic signals instead of light signals, respectively. Stimuli-responsive probes are highly desirable for improved imaging results since they can significantly reduce surrounding interference signals. Reactive oxygen species (ROS), which are closely implicated in a series of diseases such as cancer and inflammation, are frequently employed as initiators for responsive agents to selectively change the imaging signal. Thus, ROS-responsive agents incorporated into low-background imaging techniques can achieve a more promising imaging quality. In this review, recent advances in ROS-responsive probes for low-background optical-imaging techniques are summarized. Moreover, the approaches to improving the sensitivity of probes and tissue penetration depth are discussed in detail. In particular, we highlight the reaction mechanisms between the probes and ROS, revealing the potential for low-background optical imaging.

Hemin-doped metal-organic frameworks based nanozyme electrochemical sensor with high stability and sensitivity for dopamine detection

This study reports a new type of artificial nanozyme based on Hemin-doped-HKUST-1 (HKUST-1, also referred to as MOF-199; a face-centered-cubic MOF containing nanochannels) as a redox mediator for the detection of dopamine (DA). Hemin-doped-HKUST-1 was successfully synthesized by one-pot hydrothermal method, which was combined with reduced graphene oxide (rGO) modified on a glassy carbon electrode (GCE) to construct a sensor (Hemin-doped HKUST-1/rGO/GCE). The morphology and structure of Hemin-doped-HKUST-1 were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and infrared spectra (IR) techniques. The Hemin-doped HKUST-1/rGO nanozyme showed an excellent electrocatalytic activity for DA oxidation, which is due to the enhanced Hemin activity through the formation of a metal-organic framework (MOFs) and the synergy between the Hemin-doped HKUST-1 and rGO in nanozyme. The resulted sensor exhibited a high sensitivity of 1.224 μA μM-1, with a lower detection limit of 3.27 × 10-8 M (S/N = 3) and a wide linear range of 0.03-10 μM for DA detection. In addition, due to the stabilizing effect of MOFs on heme, the sensor showed satisfactory stability and has been successfully applied to the detection of DA in serum samples, indicating that this work has potential value in clinical work.

Recent Advances in the Design and Sensing Applications of Hemin/Coordination Polymer-Based Nanocomposites

The fabrication of biomimetic catalysts as substituents for enzymes is of critical interest in the field due to the problems associated with the extraction, purification, and storage of enzymes in sensing applications. Of these mimetics, hemin/coordination polymer-based nanocomposites, mainly hemin/metal-organic frameworks (MOF), have been developed for various biosensing applications because of the unique properties of each component, while trying to mimic the normal biological functions of heme within the protein milieu of enzymes. This critical review first discusses the different catalytic functions of heme in the body in the form of enzyme/protein structures. The properties of hemin dimerization are then elucidated with the supposed models of hemin oxidation. After that, the progress in the fabrication of hemin/MOF nanocomposites for the sensing of diverse biological molecules is discussed. Finally, the challenges in developing this type of composites are examined as well as possible proposals for future directions to enhance the sensing performance in this field further.

A silicon nanoparticle-based nanoprobe for ratiometric fluorescence and visual detection of glucose

We synthesized SiNPs by a one-step method and established, for the first time, a novel SiNP-based nanoprobe (denoted as SiNPs/OPD/HRP/GOx) for ratiometric fluorescence and visual detection of glucose in serum samples.

A novel chemiluminescence imaging immunosensor for prostate specific antigen detection based on a multiple signal amplification strategy

A novel chemiluminescence (CL) imaging platform was constructed for prostate specific antigen (PSA) detection in a multiple signal amplifying manner. To construct the platform, the primary antibody for PSA was firstly immobilized on a O-ring area of a glass slide for recognizing the PSA. The horseradish peroxidase (HRP) and the secondary antibody of PSA (Ab₂) functionalized Au NPs (HRP-Au NPs-Ab₂) were modified on the platform through immunoreaction between PSA and Ab₂. The excellent catalytic effect of Au NPs and HRP on the HRP-Au NPs-Ab₂ to the luminol-H₂O₂ CL system provided the dual-signal amplification for PSA detection. To further enhance the sensitivity, tyramine signal amplification (TSA) strategy was introduced: tyramine-HRP conjugates were added into the O-ring reservoir and thus tyramine-HRP repeats formed in the presence of H₂O₂, generating a multiple signal amplification because of the large amounts of HRP on the sensing interface. The excellent performance of HRP-Au NPs-Ab₂ and TSA strategy endows the CL platform with high sensitivity. The PSA was detected with a photomultiplier tube (PMT) and visually analyzed by a charge coupled device (CCD), respectively. The linear ranges of PMT and CCD for PSA are 0.1-100.0 ng mL^-1 with a detection limit of 0.05 pg mL^-1 and 0.5 - 100.0 ng mL^-1 with a detection limit of 0.1 pg mL^-1, respectively. The levels of PSA in several human serum samples were determined and the recoveries are ranged from 82.5% - 117.0%. This CL immunosensing platform holds great potential for bioactive molecules detection visually and sensitively.

Rational design of metal-organic frameworks to deliver methotrexate for targeted rheumatoid arthritis therapy

Methotrexate (MTX) has been used as an anchor drug for the treatment of rheumatoid arthritis (RA), while the patients with chronic MTX administration suffer from severe side-effects. To this end, targeted delivery of MTX by nanomedicine has attracted great interest. In this work, we aimed to employ metal-organic frameworks (MOFs) as nanocarrier to deliver MTX by virtue of its facile and green preparation and exceptionally high drug loading. While MTX could be easily and effectively loaded via different MOF construction strategies, such as direct coordination, physical encapsulation, and covalent conjugation, we found that most of the MTX loading MOFs showed premature and burst drug release, attributable to the unstable coordination between MTX and metals. To address this issue, we rationally designed the MOFs by conjugating MTX with tannic acid (TA) at 2:1 M ratio and then coordinating with ferric ion (Fe³⁺), followed by surface modification of hyaluronic acid (HA). The resulting MOFs achieved ultra-high drug loading (45%) and sustained drug release, and could selectively recognize the diseased cells for anti-inflammatory effect. The in vivo therapeutic evaluation suggested that the MOFs could enhance the anti-rheumatic activity of MTX while minimizing its toxic effects by targeted drug delivery, resulting in improved therapeutic index. This work provides a biocompatible nano-platform to deliver MTX for RA treatment, and importantly, calls for special attention to the gap between MOFs design and their biological applications, and the gap needs to be filled by careful evaluation of in vivo stability and burst drug release.

Magnetic Nanoparticle-Based Ligand Replacement Strategy for Chemical Luminescence Determination of Cholesterol

Determination of serum cholesterol (Chol) is important for disease diagnosis, and has attracted great attention during the last few decades. Herein, a new magnetic nanoparticle-based ligand replacement strategy has been presented for chemical luminescence detection of Chol. The detection depends on ligand replacement from ferrocene (Fc) to Chol through a β-cyclodextrin (β-CD)-based host-guest interaction, which releases Fc-Hemin as a catalyst for the luminol/hydrogen peroxide chemical luminescence system. More importantly, the luminescence signal can be captured by the camera of a smartphone, thus realizing Chol detection with less instrument dependency. The limit of detection of this method is calculated to be 0.18 μM, which is comparable to some of the developed methods. Moreover, this method has been used successfully to quantify Chol from serum samples with a simple extraction process.

Nanomaterial-enhanced chemiluminescence reactions and their applications

Chemiluminescence (CL) analysis is a trace analytical method that possesses advantages including high sensitivity, wide linear range, easy operation, and simple instruments. With the development of nanotechnology, many nanomaterial (NM)-enhanced CL systems have been established in recent years and applied for the CL detection of metal ions, anions, small molecules, tumor markers, sequence-specific DNA, and RNA. This review summarizes the research progress of the nanomaterial-enhanced CL systems the past five years. These CL reactions include luminol, peroxyoxalate, lucigenin, ultraweak CL reactions, and so on. The CL mechanisms of the nanomaterial-enhanced CL systems are discussed in the first section. Nanomaterials take part in the CL reactions as the catalyst, CL emitter, energy acceptor, and reductant. Their applications are summarized in the second section. Finally, the challenges and opportunities are discussed.

Engineered glyphosate oxidase coupled to spore-based chemiluminescence system for glyphosate detection

The extensive and intensive utilization of glyphosate (Glyp) caused public concerns on the potential risk of environment and health resulted from the chemical residues. Therefore, the development of a high-selective, low-cost and easy-operation Glyp detection methods is highly desired. Screening highly selective enzymes by directed evolution is important in practical applications. Herein, a glyphosate oxidase (GlypO) preferring substrate Glyp to produce H2O2 was obtained via directed evolution from glycine oxidase obtained from Bacillus cereus (BceGO). The catalytic efficiency, specificity constant, and affinity enhancement factor of GlypO toward Glyp were increased by 2.85 × 103-fold; 2.25 × 105-fold; and 9.64 × 104-fold, respectively, compared with those of BceGO. The catalytic efficiency toward glycine decreased by 78.60-fold. The spores of Bacillus subtilis (B. subtilis) effectively catalyzed luminol-H2O2 reaction to create excellent chemiluminescence (CL) signal because CotA-laccase exists on their surface. Based on these findings, a new CL biosensor via coupling to biological reaction system was presented for Glyp detection. The CL biosensor exhibited several advantages, such as eco-friendliness, low cost, high selectivity and sensitivity, and good practical application prospects for environmental pollution control.