Interfacial Polymerization of Dopamine in a Pickering Emulsion: Synthesis of Cross-Linkable Colloidosomes and Enzyme Immobilization at Oil/Water Interfaces

Modulating the performance of lipase-hydrogel microspheres in a "micro water environment"

In our previous work, we successfully stimulated lipase activity in an anhydrous reaction system using porous polyacrylamide hydrogel microsphere (PPAHM) as a carrier of lipase and free water. However, the effect of the existence state and content of water in lipase-porous polyacrylamide hydrogel microsphere (L-PPAHM) on the interfacial activation remained unclear. In this work, L-PPAHM with different water contents were obtained by water mist rehydration and were used to catalyze the synthesis of conjugated linoleic acid ethyl ester (CLA-EE). The results revealed that there were three existence states of water in L-PPAHM: bound water, semi-bound water and free water, and free water provided the "micro water environment" for the interfacial activation of lipase. The reusability of L-PPAHM with different water contents showed that the activity and stability of L-PPAHM could be achieved by varying the water content of L-PPAHM. The proportion of free water in L-PPAHM increased, and the activity of L-PPAHM increased, but the strength of hydrogen bond interaction between PPAHM and lipase weakened, resulting in the decrease of stability. L-PPAHM with 2/3 of water absorption could ensure sufficient immobilized lipase activity and stability, and its water absorption property could reduce the free water generated during esterification, thus increasing the yield of CLA-EE.

Pickering Emulsion Catalysis: Interfacial Chemistry, Catalyst Design, Challenges, and Perspectives

Pickering emulsions are particle-stabilized surfactant-free dispersions composed of two immiscible liquid phases, and emerge as attractive catalysis platform to surpass traditional technique barrier in some cases. In this review, we have comprehensively summarized the development and the catalysis applications of Pickering emulsions since the pioneering work in 2010. The explicit mechanism for Pickering emulsions will be initially discussed and clarified. Then, summarization is given to the design strategy of amphiphilic emulsion catalysts in two categories of intrinsic and extrinsic amphiphilicity. The progress of the unconventional catalytic reactions in Pickering emulsion is further described, especially for the polarity/solubility difference-driven phase segregation, "smart" emulsion reaction system, continuous flow catalysis, and Pickering interfacial biocatalysis. Challenges and future trends for the development of Pickering emulsion catalysis are finally outlined.

Synthesis of lipase-hydrogel microspheres and their application in deacidification of high-acid rice bran oil

The main challenge of rice bran oil (RBO) as a highly nutritional edible oil is the high content of free fatty acids.

A lipase/poly (ionic liquid)-styrene microspheres/PVA composite hydrogel for esterification application

Enzymes are particularly attractive as biocatalysts for the green synthesis of chemicals and pharmaceuticals. However, the traditional enzyme purification and separation process is complex and inefficient, which limits the wide application of enzyme catalysis. In this paper, an efficient strategy for enzyme purification and immobilization in one step is proposed. A novel poly (ionic liquid)-styrene microsphere is prepared by molecular design and synthesis for adsorbing and purifying high activity lipase from fermentation broth directly. By optimizing the surface morphologies and charge of the microspheres, the enzyme loading is significantly improved. In order to further stabilize the catalytic environment of lipase, the resulting lipase/poly (ionic liquid)-styrene microspheres are immobilized in physical crosslinking hydrogel to obtain a complex lipase catalytic system, which can be prepared into various shapes according to the requirements of catalytic environment. In the actual catalytic reaction process, this complex lipase catalytic system exhibits excellent catalytic activity (6314.69 ± 21.27 U mg^-1) and good harsh environment tolerance compared with the lipase fermentation broth (1672.87 ± 36.68 U mg^-1). Under the condition of cyclic catalysis, the complex lipase catalytic system shows the outstanding reusability (After 8 cycles the enzymatic activity is still higher than that of the lipase fermentation broth) and is easily separated from the products.

Engineering proteinaceous colloidosomes as enzyme carriers for efficient and recyclable Pickering interfacial biocatalysis

Despite Pickering interfacial biocatalysis being a popular topic in biphasic biocatalysis, the development of water-in-oil (w/o) emulsion systems stabilized by single particles remains a challenge. For the first time, hydrophobized proteinaceous colloidosomes with magnetic-responsiveness are developed to function as both an enzyme carrier and emulsifier, achieving a breakthrough in protein-based w/o Pickering bioconversion. Enzyme-loaded protein colloidosomes are synthesized by a facile and mild method via emulsion templating. This system exhibits superior catalytic activity to other systems at the oil–water interface. Besides, feasible enzyme recovery and reusability ensure that this novel system can be employed as an efficient and eco-friendly recyclable platform.

Engineering proteinaceous colloidosomes with magnetic-responsiveness are designed as both enzyme carrier and emulsifier, achieving a breakthrough in protein-based w/o Pickering interfacial biocatalysis.

Adsorption-Reaction Processes Between Gelatin and PDMS-E Emulsion Droplets

In this work, the effects of droplet size and reaction time on the adsorption-reaction processes between gelatin and α-[3-(2,3-epoxypropoxy) propyl]-ω-butyl-polydimethylsiloxane (PDMS-E) emulsion droplets were studied. Gelatin molecules were only physically adsorbed on the surface of the PDMS-E droplet in the 0-75 min range, which was unrelated to the droplet size (100-1000 nm). For the small-size droplets (<410 nm), the physical adsorption proceeded over 75 min followed by agglomeration. For middle-size droplets (410-680 nm), the physical adsorption finished at 125 min; subsequently, the nucleophilic reaction between the primary amino group and the epoxy group began to happen, and globular-like or core-shell colloidal particles were formed. For large-size droplets (>680 nm), the nucleophilic reaction occurred at 75 min and produced core-shell or multi-layered colloidal particles. In a word, the physical absorption or nucleophilic reaction between gelatin and PDMS-E emulsion droplets could be controlled by controlling the droplet size and reaction time. Furthermore, the soft tissue paper coated with large-size droplets exhibited excellent resistance to water permeability and flame-resistant performance, which were carried out by water resistance and flammability tests.

The Electric Field Responses of Inorganic Ionogels and Poly(ionic liquid)s

Ionic liquids (ILs) are a class of pure ions with melting points lower than 100 °C. They are getting more and more attention because of their high thermal stability, high ionic conductivity and dielectric properties. The unique dielectric properties aroused by the ion motion of ILs makes ILs-contained inorganics or organics responsive to electric field and have great application potential in smart electrorheological (ER) fluids which can be used as the electro-mechanical interface in engineering devices. In this review, we summarized the recent work of various kinds of ILs-contained inorganic ionogels and poly(ionic liquid)s (PILs) as ER materials including their synthesis methods, ER responses and dielectric analysis. The aim of this work is to highlight the advantage of ILs in the synthesis of dielectric materials and their effects in improving ER responses of the materials in a wide temperature range. It is expected to provide valuable suggestions for the development of ILs-contained inorganics and PILs as electric field responsive materials.

Enzyme-Adsorbed Chitosan Nanogel Particles as Edible Pickering Interfacial Biocatalysts and Lipase-Responsive Phase Inversion of Emulsions

Here, a simple food-grade Pickering emulsion system is prepared and adopted for biphasic biocatalytic reactions. The chitosan nanogels were prepared with strong dispersion of chitosan aggregates approaching neutral pH and then used as the particle emulsifiers to produce oil-in-water Pickering emulsions. The chitosan nanogel exhibited high affinity to negatively charged lipase. As a result of increasing the biphasic interfacial area and loading amount on the oil-water interface, the catalysis activity of lipase and recycling and pH stability were highly enhanced through colorimetric determination of p-nitrophenol (the hydrolysis product of p-nitrophenyl palmitate). A general strategy was proposed to obtain stimulus-responsive Pickering emulsions that can undergo phase inversion. The in situ modification of the wettability of chitosan nanogel could be attributed to the interaction between nanogel and free fatty acids, which was triggered by lipase hydrolysis. This would permit a rapid and controlled release of hydrophobic active components in response to enzymatic triggers.

Pickering emulsions: Versatility of colloidal particles and recent applications

The versatility of colloidal particles endows the particle stabilized or Pickering emulsions with unique features and can potentially enable the fabrication of a wide variety of derived materials. We review the evolution and breakthroughs in the research on the use of colloidal particles for the stabilization of Pickering emulsions in recent years for the particle categories of inorganic particles, polymer-based particles, and food-grade particles. Moreover, based on the latest works, several emulsions stabilized by the featured particles and their derived functional materials, including enzyme immobilized emulsifiers for interfacial catalysis, 2D colloidal materials stabilized emulsions as templates for porous materials, and Pickering emulsions as adjuvant formulations, are also summarized. Finally, we point out the gaps in the current research on the applications of Pickering emulsions and suggest future directions for the design of particulate stabilizers and preparation methods for Pickering emulsions and their derived materials.

•

We review the evolution and breakthroughs in the research on the use of colloidal particles for the stabilization of Pickering emulsions in recent years for the particle categories of inorganic particles, polymer-based particles, and food-grade particles.

•

We discuss recent emulsions stabilized by the featured particles and their derived functional materials, including enzyme immobilized emulsifiers for interfacial catalysis, 2D colloidal materials stabilized emulsions as templates for porous materials, and Pickering emulsions as adjuvant formulations.

•

We point out the gaps in the current research on the applications of Pickering emulsions and suggest future directions for the design of particulate stabilizers and preparation methods for Pickering emulsions and their derived materials.

Inverse Pickering Emulsion Stabilized by Binary Particles with Contrasting Characteristics and Functionality for Interfacial Biocatalysis

Water-in-oil (w/o) Pickering emulsions have received considerable attention in biphasic enzymatic catalysis for their advantages of good stability, large interfacial area, and ease of product separation. However, enzymes are commonly encapsulated in the interior of aqueous droplets, which inevitably increases the diffusional resistance to catalysis. Alternatively, enzymes are immobilized or trapped into Pickering stabilizers. Often, however, these approaches suffer from leaching and a decrease of enzyme activity during the chemical treatments. We report here a new Pickering interfacial biocatalysis platform with efficient enzyme encapsulation, binary particle composition, and high catalytic performance. Our approach is based on w/o Pickering emulsions stabilized by binary particles consisting of hard silica and soft, pH-responsive microgel particles. We demonstrate that pH-responsive microgels can simultaneously stabilize a w/o Pickering emulsion, encapsulate enzymes, and catalyze reactions at the water/oil interface. In addition, we show that the coordination with rigid silica nanoparticles as additional stabilizers markedly improves the emulsion structure and will provide a new avenue for the preparation of w/o Pickering emulsion and concept of biphasic catalysis.

The Horizon of the Emulsion Particulate Strategy: Engineering Hollow Particles for Biomedical Applications

With their hierarchical structures and the substantial surface areas, hollow particles have gained immense research interest in biomedical applications. For scalable fabrications, emulsion-based approaches have emerged as facile and versatile strategies. Here, the recent achievements in this field are unfolded via an "emulsion particulate strategy," which addresses the inherent relationship between the process control and the bioactive structures. As such, the interior architectures are manipulated by harnessing the intermediate state during the emulsion revolution (intrinsic strategy), whereas the external structures are dictated by tailoring the building blocks and solidification procedures of the Pickering emulsion (extrinsic strategy). Through integration of the intrinsic and extrinsic emulsion particulate strategy, multifunctional hollow particles demonstrate marked momentum for label-free multiplex detections, stimuli-responsive therapies, and stem cell therapies.

Reaction Kinetics at PDMS-E Emulsion Droplet-Gelatin Interface

In this work, interfacial reaction kinetics between α-[3-(2,3-epoxypropoxy)propyl]-ω-butyl-polydimethylsiloxane emulsion droplets with different sizes and gelatin was studied. The results of amino conversion rate determination show that the reaction proceeded in two steps. Fluorescence spectra analysis indicates that step 1 (0-2 h) should be the adsorption of gelatin on droplet surface. In step 2 (2-13 h), amino conversion rate increased rapidly. The reaction rate in step 2 ( k₂) was obtained by using the 2nd-order approach to model the grafting reaction kinetics. The quantitative relationships among amino conversion rate, droplet size, the concentration of surfactant, reaction temperature, and time were described by linear regression models in given ranges of conditions in step 2. Thermodynamic analysis indicates that the interfacial reaction is an endothermic reaction. After 13 h, the reaction was almost stopped.

Emulsion Stabilization with Functionalized Cellulose Nanoparticles Fabricated Using Deep Eutectic Solvents

In this experiment, the influence of the morphology and surface characteristics of cellulosic nanoparticles (i.e., cellulose nanocrystals [CNCs] and cellulose nanofibers [CNFs]) on oil-in-water (o/w) emulsion stabilization was studied using non-modified or functionalized nanoparticles obtained following deep eutectic solvent (DES) pre-treatments. The effect of the oil-to-water ratio (5, 10, and 20 wt.-% (weight percent) of oil), the type of nanoparticle, and the concentration of the particles (0.05–0.2 wt.-%) on the oil-droplet size (using laser diffractometry), o/w emulsion stability (via analytical centrifugation), and stabilization mechanisms (using field emission scanning electron microscopy with the model compound—i.e., polymerized styrene in water emulsions) were examined. All the cellulosic nanoparticles studied decreased the oil droplet size in emulsion (sizes varied from 22.5 µm to 8.9 µm, depending on the nanoparticle used). Efficient o/w emulsion stabilization against coalescence and an oil droplet-stabilizing web-like structure were obtained only, however, with surface-functionalized CNFs, which had a moderate hydrophilicity level. CNFs without surface functionalization did not prevent either the coalescence or the creaming of emulsions, probably due to the natural hydrophobicity of the nanoparticles and their instability in water. Moderately hydrophilic CNCs, on the other hand, distributed evenly and displayed good interaction with both dispersion phases. The rigid structure of CNCs meant, however, that voluminous web structures were not formed on the surface of oil droplets; they formed in flat, uniform layers instead. Consequently, emulsion stability was lower with CNCs, when compared with surface-functionalized CNFs. Tunable cellulose nanoparticles can be used in several applications such as in enhanced marine oil response.

Submicron Inverse Pickering Emulsions for Highly Efficient and Recyclable Enzymatic Catalysis

Herein, we report the utilization of a submicron Pickering emulsion (SPE) for the encapsulation of enzymes (e.g., lipase from Candida sp.) in water droplets that were solely stabilized by hydrophobic solid or mesoporous silica nanoparticles in toluene for use in biphasic reactions. The catalytic performance of encapsulated lipase was evaluated in the esterification of 1-hexanol and hexanoic acid under stirring-free conditions, which was favorable for maintaining enzymatic activity. Remarkably, the SPE significantly increased the specific activity of encapsulated lipase, owing to the exceptionally high water/oil interfacial area and short diffusion distance of the reagents in the SPE. With mesoporous silica nanoparticles, the activity of lipase was approximately 25.5- and 2.8-times higher than that of free lipase and encapsulated lipase in the micron Pickering emulsion, respectively. The higher water/toluene interfacial area was attributed to the smaller submicron-scale water droplets and the increase in the mass transfer of enzymes or substrates was further improved by using mesoporous Pickering stabilizers. In addition, the encapsulated lipase in SPE also demonstrated excellent stability and could be recycled up to 15 times without significant loss of activity.

Preparation of Molecularly Imprinted Microspheres as Biomimetic Recognition Material for In Situ Adsorption and Selective Chemiluminescence Determination of Bisphenol A

Bisphenol A (BPA) is an endocrine disrupter in environments which can induce abnormal differentiation of reproductive organs by interfering with the action of endogenous gonadal steroid hormones. In this work, the bisphenol A (BPA) molecularly-imprinted microspheres (MIMS) were prepared and used as biomimetic recognition material for in situ adsorption and selective chemiluminescence (CL) determination of BPA. Through non-covalent interaction, the BPA-MIMS was successfully prepared by Pickering emulsion polymerization using a BPA template, 4-vinylpyridine (4-VP) monomer, ethylene glycol dimethacrylate (EGDMA) cross-linker, and a SiO₂ dispersion agent. The characterization of scanning electron microscopy (SEM) and energy-disperse spectroscopy (EDS) showed that the obtained MIMS possessed a regular spherical shape and narrow diameter distribution (25–30 μm). The binding experiment indicated BPA could be adsorbed in situ on the MIMS-packing cell with an apparent maximum amount Q_max of 677.3 μg g⁻¹. Then BPA could be selectively detected by its sensitive inhibition effect on the CL reaction between luminol and periodate (KIO₄), and the inhibition mechanism was discussed to reveal the CL reaction process. The CL intensity was linear to BPA concentrations in two ranges, respectively from 0.5 to 1.5 μg mL⁻¹ with a detection limit of 8.0 ng mL⁻¹ (3σ), and from 1.5 to 15 μg mL⁻¹ with a limit of detection (LOD) of 80 ng mL⁻¹ (3σ). The BPA-MIPMS showed excellent selectivity for BPA adsorption and the proposed CL method has been successfully applied to BPA determination in environmental water samples.

Thermally Tunable Pickering Emulsions Stabilized by Carbon-Dot-Incorporated Core-Shell Nanospheres with Fluorescence "On-Off" Behavior

Lack of deep understanding of nanoparticle (NP) actions at oil/water interface set an obstacle to practical applications of Pickering emulsions. Fluorescence labels fabricated by incorporation of carbon dots (CDs) into poly(N-isopropylacrylamide) (PNIPAM) matrix can not only mark the action of PNIPAM-based NPs in the interface but also reflect the colloidal morphologies of PNIPAM. In this work, we employed coaxial electrospraying for fabricating core-shell nanospheres of cellulose acetate encapsulated by PNIPAM, and facile incorporation of CDs in PNIPAM shells was achieved simultaneously. The coaxial electrosprayed NPs (CENPs) with temperature-dependent wettability can stabilize heptane and toluene in water at 25 °C, respectively, and reversible emulsion break can be triggered by temperature adjustment around the low critical solution temperature (LCST). Remarkably, CENP/CD composites exhibited a fluorescence "on-off" behavior because of the volume phase transition of the PNIPAM shell. CENP/CD composites in Pickering emulsions clearly elucidated the motions of CENPs in response to temperature changes. At temperatures below the LCST, the CENP concentration played an important role in surface coverage of oil droplets. Specifically, the CENP concentration above the minimum concentration for complete emulsification of oil phase led to high surface coverage and two-domain adsorption of CENPs at the interface including primary monolayer anchoring of CENPs on droplets surrounded by interconnected CENP networks, which contributed to the superior stability of the emulsions. Moreover, CENP/CD composites can be recycled with well-preserved core-shell structure and stable fluorescent properties, which offers their great potential applications in sensors and imaging.

The fabrication of amphiphilic double dynamers for responsive Pickering emulsifiers

Xylene-in-water Pickering emulsion stabilized by polymer particles that were fabricated by the self-assembly of amphiphilic double dynamers showed temperature- and pH-responsive demulsification feature.

Polydopamine Based Colloidal Materials: Synthesis and Applications

Polydopamine is a synthetic analogue of natural melanin (eumelanin) produced from oxidative polymerization of dopamine. Owing to its strong adhesion ability, versatile chemical reactivity, biocompatibility and biodegradation, polydopamine is commonly applied as a versatile linker to synthesize colloidal materials with diverse structures, unique physicochemical properties and tunable functions, which allow for a broad scope of applications including biomedicine, sensing, catalysis, environment and energy. In this personal account, we discuss first about the different synthetic approaches of polydopamine, as well as its polymerization mechanism, and then with a comprehensive overview of recent progress in the synthesis and applications of polydopamine-based colloidal materials. Finally, we summarize this personal account with future perspectives.

Oriented Enzyme Immobilization at the Oil/Water Interface Enhances Catalytic Activity and Recyclability in a Pickering Emulsion

Enzyme-loaded water-in-oil Pickering emulsion is a promising system for biphasic catalytic reactions. In this paper, we report on oriented enzyme immobilization at the oil/water interface in a Pickering emulsion, in which CHO-Janus silica nanoparticles (CHO-JNPs) are utilized as a stabilizer of the emulsion and support for the enzyme to enhance both catalytic activity and recyclability. The catalytic performance of this immobilized enzyme (lipase from Candida sp.) was evaluated by esterification of hexanoic acid and 1-hexanol in a water/heptane biphasic medium. The results show that the specific catalytic activity of the immobilized enzyme (33.2 U mL^-1) was 6.5 and 1.4 times higher than that of free enzyme (5.1 U mL^-1) and encapsulated enzyme in the liquid core (23.3 U mL^-1), respectively. Moreover, the immobilized enzyme demonstrated good stability and recyclability, retaining 75% of its activity after 9 cycles. We expect that oriented enzyme immobilization at the oil/water interface will be an important strategy for enhancing catalytic performance in Pickering emulsions.

Silk Nanofibers as Robust and Versatile Emulsifiers

Peptides have been extensively studied as emulsifiers due to their sequence and size control, biocompatibility, versatility, and stabilizing capacity. However, cost and mass production remain the challenges for broader utility for these emulsifiers. Here we demonstrate the utility of silk fibroin nanofibers as emulsifiers, with superior functions to the more traditional peptide emulsifiers. This silk nanofiber system is universal for different oil phases with various polarities and demonstrates control of microcapsule size through tuning the ratio of silk fibroin nanofiber solutions to oils. Besides the improved stabilizing capacity to peptides, these silk fibroin nanofibers endow additional stability to the emulsions formed under high salt concentration and low pH. Highly efficient encapsulation of biomarkers through interfacial networks suggests potential applications in therapeutics, food, and cosmetics. Compared to peptide emulsifiers, these silk fibroin nanofibers offer advantages in terms of cost, purification, and production scale, without compromising biocompatibility, stabilizing capacity, and versatility.

Scale Effect on the Interface Reaction between PDMS-E Emulsion Droplets and Gelatin

In this study, the scale effect on the interface reaction between PDMS-E emulsion droplets and gelatin was studied systematically. The monodisperse α-[3-(2,3-epoxy-propoxy)propyl]-ω-butyl-polydimethylsiloxane (PDMS-E) emulsion droplets on different scales were prepared using a Shirasu porous glass (SPG) membrane with a 0.5 μm pore size. The zeta potential results showed that the surface charge density of PDMS-E droplets decreased with the droplet scale, and the variation went through three stages, which corresponded to the diameter ranges of 100-450, 450-680, and 670-800 nm, respectively. The results of Raman spectra indicated that the distribution concentration of head groups in surfactants decreased but the polar epoxy groups tend to be exposed on the interface with the increase in the droplet scale. This was conducive to the nucleophilic attack of amino groups in gelatin on the epoxy group. Thus, the conversion of amino groups was related to the scale of the PDMS-E droplet. This study might provide a proper way to control the rate of interfacial reaction between immiscible macromolecule monomers.

Spreading-induced dewetting for monolayer colloidosomes with responsive permeability

We present a spreading-induced dewetting approach of Pickering emulsion droplets for fabricating monolayer colloidosomes.

In Situ Surface Engineering of Mesoporous Silica Generates Interfacial Activity and Catalytic Acceleration Effect

Mesoporous structured catalysts featuring interfacial activity are the most promising candidates for biphasic interface catalysis because their nanopores can concurrently accommodate catalytic active components and provide countless permeable channels for mass transfer between the interior and the exterior of Pickering droplets. However, to date, a convenient and effective strategy for the preparation of an anchor site-containing interfacial active mesoporous catalyst is still lacking. In the present work, we report a novel and efficient interfacial active mesoporous silica (MS) catalyst, which is prepared by a facile cocondensation of two types of organosilanes and subsequent anchoring of Pd NPs onto its surface through the confinement and coordination interactions. The as-prepared catalyst is then applied as emulsifier to stabilize the water-in-oil (W/O) Pickering emulsion and investigated as an interfacial catalyst for the hydrogenation of nitroarenes. An obviously enhanced rate toward the nitrobenzene hydrogenation is observed for the 0.8 mol% Pd/PAP-functionalized mesoporous silica-20 catalyst in the emulsion system (both conversion and selectivity are >99% within 30 min) in comparison to a single aqueous solution. Moreover, the emulsion catalytic system can be easily recycled six times without the separation of the catalyst from the water phase during the recycling process. This finding demonstrates that the incorporation of phenylaminopropyl trimethoxysilane amphiphilic groups during the hydrolysis of tetramethyl orthosilicate not only endows MS with interfacial activity but also improves the catalytic activity and stability.

Electrochemical Stimulated Pickering Emulsion for Recycling of Enzyme in Biocatalysis

Potential-stimulated Pickering emulsions, using electrochemical responsive microgels as particle stabilizers, are prepared and used for biocatalysis. The microgels are constructed from cyclodextrin functionalized 8-arm poly(ethylene glycol) (8A PEG-CD) and ferrocene modified counterparts (8A PEG-Fc) via CD/Fc host-guest chemistry. Taking advantage of the redox reaction of Fc, the formation and deformation of the microgels and corresponding Pickering emulsions can be reversibly stimulated by external potential, and have been used for the hydrolysis of triacetin and kinetic resolution reaction of (R,S)-1-phenylethanol catalyzed by lipases. Potential stimulated destabilization of the emulsion realizes an effective separation of the products and enzyme recycling.

Controllable Multicompartmental Capsules with Distinct Cores and Shells for Synergistic Release

A facile and flexible approach is developed for controllable fabrication of novel multiple-compartmental calcium alginate capsules from all-aqueous droplet templates with combined coextrusion minifluidic devices for isolated coencapsulation and synergistic release of diverse incompatible components. The multicompartmental capsules exhibit distinct compartments, each of which is covered by a distinct part of a heterogeneous shell. The volume and number of multiple compartments can be well-controlled by adjusting flow rates and device numbers for isolated and optimized encapsulation of different components, while the composition of different part of the heterogeneous shell can be individually tailored by changing the composition of droplet template for flexibly tuning the release behavior of each component. Two combined devices are first used to fabricate dual-compartmental capsules and then scaled up to fabricate more complex triple-compartmental capsules for coencapsulation. The synergistic release properties are demonstrated by using dual-compartmental capsules, which contain one-half shell with a constant release rate and the other half shell with a temperature-dependent release rate. Such a heterogeneous shell provides more flexibilities for synergistic release with controllable release sequence and release rates to achieve advanced and optimized synergistic efficacy. The multicompartmental capsules show high potential for applications such as drug codelivery, confined reactions, enzyme immobilizations, and cell cultures.

Interaction Mechanism of Oil-in-Water Emulsions with Asphaltenes Determined Using Droplet Probe AFM

Emulsions with interface-active components at the oil/water interface have long been of fundamental and practical interest in many fields. In this work, the interaction forces between two oil droplets in water in the absence/presence of asphaltenes were directly measured using droplet probe atomic force microscopy (AFM) and analyzed using a theoretical model based on Reynolds lubrication theory and the augmented Young-Laplace equation by including the effects of disjoining pressure. It was revealed that the interaction forces measured between two pristine oil droplets (i.e., toluene) could be well described by the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, while an additional steric interaction should be included in the presence of asphaltenes in the oil. The surface interaction and the stability of oil droplets in aqueous solution were demonstrated to be significantly influenced by the asphaltenes concentration in oil, salt concentration, pH, and presence of divalent ions (Ca(2+)) in water. Adsorbed asphaltenes at the oil/water interface led to more negative surface potential of the oil/water interface and also induced steric repulsion between oil droplets, inhibiting the drop coalescence and stabilizing the oil-in-water emulsion. Lower pH of aqueous solution could lead to less negative surface potential and weaken the repulsion between oil droplets. Addition of divalent ions (Ca(2+)) was found to disrupt the protecting effects of adsorbed asphaltenes at oil/water interface and induce coalescence of oil droplets. Our results provide a useful methodology for quantifying the interaction forces and investigating the properties of asphaltenes at the oil/water interfaces and provide insights into the stabilization mechanism of oil-in-water emulsions due to asphaltenes in oil production and water treatment.