Self-Assembled Hierarchical Formation of Conjugated 3D Cobalt Oxide Nanobead-CNT-Graphene Nanostructure Using Microwaves for High-Performance Supercapacitor Electrode

Vacancy designed 2D materials for electrodes in energy storage devices

Vacancies are ubiquitous in nature, usually playing an important role in determining how a material behaves, both physically and chemically. As a consequence, researchers have introduced oxygen, sulphur and other vacancies into bi-dimensional (2D) materials, with the aim of achieving high performance electrodes for electrochemical energy storage. In this article, we focused on the recent advances in vacancy engineering of 2D materials for energy storage applications (supercapacitors and secondary batteries). Vacancy defects can effectively modify the electronic characteristics of 2D materials, enhancing the charge-transfer processes/reactions. These atomic-scale defects can also serve as extra host sites for inserted protons or small cations, allowing easier ion diffusion during their operation as electrodes in supercapacitors and secondary batteries. From the viewpoint of materials science, this article summarises recent developments in the exploitation of vacancies (which are surface defects, for these materials), including various defect creation approaches and cutting-edge techniques for detection of vacancies. The crucial role of defects for improvement in the energy storage performance of 2D electrode materials in electrochemical devices has also been highlighted.

3D Hierarchical Co8FeS8-FeCo2O4/N-CNTs@CF with an Enhanced Microorganisms-Anode Interface for Improving Microbial Fuel Cell Performance

Microbial fuel cells (MFCs) are promising ecofriendly techniques for harvesting bioenergy from organic and inorganic matter. Currently, it is challenging to design MFC anodes with favorable microorganism attachment and fast extracellular electron transfer (EET) rate for high MFC performance. Here we prepared N-doped carbon nanotubes (NCNTs) on carbon felt (CF) and used it as a support for growing hierarchical Co₈FeS₈-FeCo₂O₄/NCNTs core-shell nanostructures (FeCo/NCNTs@CF). We observed improved wettability, specific areal capacitance, and diffusion coefficient, as well as small charge transfer resistance compared with bare CF. MFCs equipped with FeCo/NCNTs@CF displayed a power density of 3.04 W/m² and COD removal amount of 221.0 mg/L/d, about 47.6 and 290.1% improvements compared with that of CF. Biofilm morphology and 16s rRNA gene sequence analysis proved that our anode facilitated the enrichment growth of exoelectrogens. Flavin secretion was also promoted on our hierarchical elelctrode, effectively driving the EET process. This work disclosed that hierarchical nanomaterials modified electrode with tailored physicochemical properties is a promising platform to simultaneously enhance exoelectrogen attachment and EET efficiency for MFCs.

Critical Aspects of Various Techniques for Synthesizing Metal Oxides and Fabricating Their Composite-Based Supercapacitor Electrodes: A Review

Supercapacitors (SCs) have attracted attention as an important energy source for various applications owing to their high power outputs and outstanding energy densities. The electrochemical performance of an SC device is predominantly determined by electrode materials, and thus, the selection and synthesis of the materials are crucial. Metal oxides (MOs) and their composites are the most widely used pseudocapacitive SC electrode materials. The basic requirements for fabricating high-performance SC electrodes include synthesizing and/or chemically modifying unique conducting nanostructures, optimizing a heterostructure morphology, and generating large-surface-area electroactive sites, all of which predominantly rely on various techniques used for synthesizing MO materials and fabricating MO- and MO-composite-based SC electrodes. Therefore, an SC’s background and critical aspects, the challenges associated with the predominant synthesis techniques (including hydrothermal and microwave-assisted syntheses and chemical-bath and atomic-layer depositions), and resulting electrode electrochemical performances should be summarized in a convenient, accessible report to accelerate the development of materials for industrial SC applications. Therefore, we reviewed the most pertinent studies on these synthesis techniques to provide insight into the most recent advances in synthesizing MOs and fabricating their composite-based SC electrodes as well as to propose research directions for developing MO-based electrodes for applications to next-generation SCs.

Microwave as a Tool for Synthesis of Carbon-Based Electrodes for Energy Storage

This Spotlight on Applications highlights the significant impact of microwave-assisted methods for synthesis and modification of carbon materials with enhanced properties for electrodes in energy storage applications (supercapacitors and batteries). For the past few years, microwave irradiation has been increasingly used for the synthesis of carbon materials with different morphologies using various precursors. Microwave processing exhibits numerous advantages, such as short processing times, high yield, expanded reaction conditions, high reproducibility, and high purity of products. On this frontier research area, we have discussed microwave-assisted synthesis, defect creation, simultaneous reduction and exfoliation, and heteroatom doping in carbon materials. By careful manipulation of microwave irradiation parameters, the method becomes a powerful and efficient tool to generate different morphologies in carbon-based materials. Other important outcomes are the flexible control over the degree of reduction and exfoliation of graphene derivatives, the generation of defects in graphene-based materials by metals, the intercalation of metal oxides into graphene derivatives, and heteroatom doping of graphene materials. The Spotlight on Applications aims to provide a condensed overview of the current progress in carbon-based electrodes synthesized by microwave, pointing out outstanding challenges and offering a few suggestions to trigger more research endeavors in this important field.

Sonication-supported synthesis of cobalt oxide assembled on an N-MWCNT composite for electrochemical supercapacitors via three-electrode configuration

The Co₃O₄@N-MWCNT composite was synthesized by a sonication-supported thermal reduction process for supercapacitor applications. The structural and morphological properties of the materials were characterized via Raman, XRD, XPS, SEM-EDX, and FE-TEM analysis. The composite electrode was constructed into a three-electrode configuration and examined by using CV, GCD and EIS analysis. The demonstrated electrochemical value of ~ 225 F/g at 0.5 A/g by the electrode made it appropriate for potential use in supercapacitor applications.

In Situ Synthesis of CoCeSx Bimetallic Sulfide Nanoparticles on a Bi-Pyrene Terminated Molecular Wire Modified Graphene Surface for Supercapacitors

The excellent electrical conductivity of graphene is due to its highly-conjugated structures. Manipulation of the electronic and mechanical properties of graphene can be achieved by controlling the destruction of its in-sheet conjugation system. Herein, we report the preparation of CoCeS_x -SA@BPMW@RGO through π-π stacking interactions at the molecular level. In this study, sodium alginate was reacted with Co²⁺ and Ce³⁺ , and the composite was loaded onto a graphene surface. The graphene sheets were prepared using a bi-pyrene terminated molecular wire (BPMW) to avoid re-stacking of the grapheme sheets, thereby forming nanoscale spaces between sheets. The angle between the BPMW coplanar pyrene group and the phenyl group was 33.2°, and the graphene layer is supported in an oblique direction. Finally, a three-dimensional porous composite was obtained after annealing and vulcanization. The obtained CoCeS_x -SA@BPMW@RGO exhibited excellent electrical conductivity and remarkable cycle stability. When the current density was 1 A g^-1 , its specific capacitance was as high as 1004 F g^-1 . BPMW modifies graphene through the synergistic effect of π-π stacking interaction and special structure to obtain excellent electrochemical performance. Moreover, a solid-state asymmetric supercapacitor device was fabricated based on the synthesized CoCeS_x -SA@BPMW@RGO hybrid, which exhibited a power density of 979 W kg^-1 at an energy density of 23.96 Wh kg^-1 .

Electrically Conductive Networks from Hybrids of Carbon Nanotubes and Graphene Created by Laser Radiation

A technology for the formation of electrically conductive nanostructures from single-walled carbon nanotubes (SWCNT), multi-walled carbon nanotubes (MWCNT), and their hybrids with reduced graphene oxide (rGO) on Si substrate has been developed. Under the action of single pulses of laser irradiation, nanowelding of SWCNT and MWCNT nanotubes with graphene sheets was obtained. Dependences of electromagnetic wave absorption by films of short and long nanotubes with subnanometer and nanometer diameters on wavelength are calculated. It was determined from dependences that absorption maxima of various types of nanotubes are in the wavelength region of about 266 nm. It was found that contact between nanotube and graphene was formed in time up to 400 fs. Formation of networks of SWCNT/MWCNT and their hybrids with rGO at threshold energy densities of 0.3/0.5 J/cm² is shown. With an increase in energy density above the threshold value, formation of amorphous carbon nanoinclusions on the surface of nanotubes was demonstrated. For all films, except the MWCNT film, an increase in defectiveness after laser irradiation was obtained, which is associated with appearance of C–C bonds with neighboring nanotubes or graphene sheets. CNTs played the role of bridges connecting graphene sheets. Laser-synthesized hybrid nanostructures demonstrated the highest hardness compared to pure nanotubes. Maximum hardness (52.7 GPa) was obtained for MWCNT/rGO topology. Regularity of an increase in electrical conductivity of nanostructures after laser irradiation has been established for films made of all nanomaterials. Hybrid structures of nanotubes and graphene sheets have the highest electrical conductivity compared to networks of pure nanotubes. Maximum electrical conductivity was obtained for MWCNT/rGO hybrid structure (~22.6 kS/m). Networks of nanotubes and CNT/rGO hybrids can be used to form strong electrically conductive interconnections in nanoelectronics, as well as to create components for flexible electronics and bioelectronics, including intelligent wearable devices (IWDs).

A review of the microwave-assisted synthesis of carbon nanomaterials, metal oxides/hydroxides and their composites for energy storage applications

Currently, nanomaterials are considered to be the backbone of modern civilization. Especially in the energy sector, nanomaterials (mainly, carbon- and metal oxide/hydroxide-based nanomaterials) have contributed significantly. Among the various green approaches for the synthesis of these nanomaterials, the microwave-assisted approach has attracted significant research interest worldwide. In this context, it is noteworthy to mention that because of their enhanced surface area, high conducting nature, and excellent electrical and electrochemical properties, carbon nanomaterials are being extensively utilized as efficient electrode materials for both supercapacitors and secondary batteries. In this review article, we briefly demonstrate the characteristics of microwave-synthesized nanomaterials for next-generation energy storage devices. Starting with the basics of microwave heating, herein, we illustrate the past and present status of microwave chemistry for energy-related applications, and finally present a brief outlook and concluding remarks. We hope that this review article will positively convey new insights for the microwave synthesis of nanomaterials for energy storage applications.

Facile Preparation of Fe3O4 Nanoparticles/Reduced Graphene Oxide Composite as an Efficient Anode Material for Lithium-Ion Batteries

Iron oxides are considered promising electrode materials owing to their capability of lithium storage, but their poor conductivity and large volume expansion lead to unsatisfactory cycling stability. In this paper, an inexpensive, highly effective, and facile approach to the synthesis of Fe3O4 nanoparticles/reduced graphene oxide composite (Fe3O4/RGO) is designed. The synthesized Fe3O4/RGO composite exhibits high reversible capability and excellent cyclic capacity as an anode material in lithium-ion batteries (LIBs). A reversible capability of 701.8 mAh/g after 50 cycles at a current density of 200 mA·g−1 can be maintained. The synergetic effect of unique structure and high conductivity RGO promises a well soakage of electrolyte, high structure stability, leading to an excellent electrochemical performance. It is believed that the study will provide a feasible strategy to produce transition metal oxide/carbon composite electrodes with excellent electrochemical performance for LIBs.

Electrochemical Sensor Based on Reduced Graphene Oxide/Double-Walled Carbon Nanotubes/Octahedral Fe3O4/Chitosan Composite for Glyphosate Detection

In this work, reduced graphene oxide/double-walled carbon nanotubes/octahedral-Fe3O4/chitosan composite material modified screen-printed gold electrodes (rGO/DWCNTs/Oct-Fe3O4/Cs/SPAuE) under inhibition of urease enzyme was developed for the determination of glyphosate (GLY). The electrochemical behaviors of GLY on these electrodes were evaluated by square wave voltammetry (SWV). With the electroactive surface area is 1.7 times higher than that of bare SPAuE, the rGO/DWCNTs/Oct-Fe3O4/Cs/SPAuE for detection of GLY shows a low detection limit (LOD) of ~ 0.08 ppb in a large concentration range of 0.1-1000 ppb. Moreover, it is also successfully applied to the determination of GLY in river water samples with recoveries and relative standard deviations (RSDs) from 98.7% to 106.9% and from 0.79% to 0.87%, respectively. The developed composite will probably provide an universal electrochemical sensing platform that is very promising for environmental monitoring.

Ultrasonication-mediated nitrogen-doped multiwalled carbon nanotubes involving carboxy methylcellulose composite for solid-state supercapacitor applications

In this study, a novel nanohybrid composite containing nitrogen-doped multiwalled carbon nanotubes/carboxymethylcellulose (N-MWCNT/CMC) was synthesized for supercapacitor applications. The synthesized composite materials were subjected to an ultrasonication-mediated solvothermal hydrothermal reaction. The synthesized nanohybrid composite electrode material was characterized using analytical methods to confirm its structure and morphology. The electrochemical properties of the composite electrode were investigated using cyclic voltammetry (CV), galvanic charge-discharge, and electrochemical impedance spectroscopy (EIS) using a 3 M KOH electrolyte. The fabricated composite material exhibited unique electrochemical properties by delivering a maximum specific capacitance of approximately 274 F g^-1 at a current density of 2 A g^-1. The composite electrode displayed high cycling stability of 96% after 4000 cycles at 2 A g^-1, indicating that it is favorable for supercapacitor applications.

Utilization of MWCNTs/Al2O3 as adsorbent for ciprofloxacin removal: equilibrium, kinetics and thermodynamic studies

In the present study, the adsorption behavior of ciprofloxacin (CIP) from aqueous solution onto MWCNTs/Al₂O₃ was studied using batch experiments. Physical characterization of MWCNTs/Al₂O₃ was determined by SEM, XRD, and BET. The effective parameters investigated included: initial CIP concentration, contact time, MWCNTs/Al₂O₃ mass, and temperature. Based on experimental results and correlation coefficients, the rate of CIP adsorption followed the pseudo-second-model kinetics. Complete compatibility of the adsorption isotherm process was achieved with the Langmuir model, and the maximum adsorption capacity reached 41.73 mg/g under the optimized conditions (pH = 7, MWCNTs/Al₂O₃ dose = 1.2 g/L, contact time = 60 min, initial concentration = 10 mg/L, and temperature= 45 °C). The adsorption capacities based on the Langmuir model at different temperatures, 273, 288, 303, and 318 K, were equal to 72.18, 75.92, 79.65, and 83.47 mg/g, respectively. The determined parameters of the thermodynamic studies demonstrated the endothermic and spontaneous nature of the biosorption. The mean free energy was estimated from D-R isotherm model to be 0.316-0.707 KJ/mol, which clearly proved that the adsorption experiment followed a physical process. The data suggest that MWCNTs/Al₂O₃ could be used as a highly effective adsorbent material with a high capacity for the removal of antibiotics from water and wastewater.

Carbon Transition-metal Oxide Electrodes: Understanding the Role of Surface Engineering for High Energy Density Supercapacitors

Supercapacitors store electrical energy by ion adsorption at the interface of the electrode-electrolyte (electric double layer capacitance, EDLC) or through faradaic process involving direct transfer of electrons via oxidation/reduction reactions at one electrode to the other (pseudocapacitance). The present minireview describes the recent developments and progress of carbon-transition metal oxides (C-TMO) hybrid materials that show great promise as an efficient electrode towards supercapacitors among various material types. The review describes the synthetic methods and electrode preparation techniques along with the changes in the physical and chemical properties of each component in the hybrid materials. The critical factors in deriving both EDLC and pseudocapacitance storage mechanisms are also identified in the hope of pointing to the successful hybrid design principles. For example, a robust carbon-metal oxide interaction was identified as most important in facilitating the charge transfer process and activating high energy storage mechanism, and thus methodologies to establish a strong carbon-metal oxide contact are discussed. Finally, this article concludes with suggestions for the future development of the fabrication of high-performance C-TMO hybrid supercapacitor electrodes.

Catalytic methane technology for carbon nanotubes and graphene

The catalytic methane technology for the production of carbon nanotubes and graphene is summarized in this review.

High-performance supercapacitors based on the carbon nanotubes, graphene and graphite nanoparticles electrodes

In this study, the three structures of the symmetric paper supercapacitors based on the carbon nanotubes (CNTs), graphite nanoparticles (GNPs) and graphene electrodes have been fabricated. In the supercapacitors was used of polyvinyl alcohol (PVA)/phosphoric acid (H₃PO₄) as a gel electrolyte and the BaTiO₃ film as a separator film. The carbon nanomaterials, gel electrolyte surface, and electrode films were characterized by scanning electron microscopy (SEM) and transmission electron microscope (TEM). The specific capacitance of the symmetric paper supercapacitors using charge-discharge technique and C-V curves at the voltage scan rates 20 mV/s and 150 mV/s have been investigated. The symmetric paper supercapacitor based on the CNTs electrode showed higher specific capacitance 411 F g⁻¹, compared to GNPs and graphene supercapacitors. Also by electrochemical impedance spectroscopy, the Nyquist curves of the symmetric paper supercapacitors have been plotted. For the symmetric paper supercapacitors based on the GNPs, graphene and CNTs electrodes the equivalent series resistance (ESR) resistance was 210 Ω, 96 Ω and 101 Ω respectively. The flexible symmetric paper supercapacitor based on BaTiO₃/PVA/CNTs structure denotes a new type of the flexible supercapacitor that can be applied to the soft electronic.

The Role of Graphene and Other 2D Materials in Solar Photovoltaics

2D materials have attracted considerable attention due to their exciting optical and electronic properties, and demonstrate immense potential for next-generation solar cells and other optoelectronic devices. With the scaling trends in photovoltaics moving toward thinner active materials, the atomically thin bodies and high flexibility of 2D materials make them the obvious choice for integration with future-generation photovoltaic technology. Not only can graphene, with its high transparency and conductivity, be used as the electrodes in solar cells, but also its ambipolar electrical transport enables it to serve as both the anode and the cathode. 2D materials beyond graphene, such as transition-metal dichalcogenides, are direct-bandgap semiconductors at the monolayer level, and they can be used as the active layer in ultrathin flexible solar cells. However, since no 2D material has been featured in the roadmap of standard photovoltaic technologies, a proper synergy is still lacking between the recently growing 2D community and the conventional solar community. A comprehensive review on the current state-of-the-art of 2D-materials-based solar photovoltaics is presented here so that the recent advances of 2D materials for solar cells can be employed for formulating the future roadmap of various photovoltaic technologies.

Interfacial Engineering of Hierarchical Transition Metal Oxide Heterostructures for Highly Sensitive Sensing of Hydrogen Peroxide

Hydrogen peroxide (H₂ O₂ ) is a major messenger molecule in cellular signal transduction. Direct detection of H₂ O₂ in complex environments provides the capability to illuminate its various biological functions. With this in mind, a novel electrochemical approach is here proposed by integrating a series of CoO nanostructures on CuO backbone at electrode interfaces. High-resolution transmission electron microscopy (HRTEM), X-ray diffraction, and X-ray photoelectron spectroscopy demonstrate successful formation of core-shell CuO-CoO hetero-nanostructures. Theoretical calculations further confirm energy-favorable adsorption of H₂ O₂ on surface sites of CuO-CoO heterostructures. Contributing to the efficient electron transfer path and enhanced capture of H₂ O₂ in the unique leaf-like CuO-CoO hierarchical 3D interface, an optimal biosensor-based CuO-CoO-2.5 h electrode exhibits an ultrahigh sensitivity (6349 µA m m^-1 cm^-2 ), excellent selectivity, and a wide detection range for H₂ O₂ , and is capable of monitoring endogenous H₂ O₂ derived from human lung carcinoma cells A549. The synergistic effects for enhanced H₂ O₂ adsorption in integrated CuO-CoO nanostructures and performance of the sensor suggest a potential for exploring pathological and physiological roles of reactive oxygen species like H₂ O₂ in biological systems.

Hierarchically Porous N-Doped Carbon Nanotubes/Reduced Graphene Oxide Composite for Promoting Flavin-Based Interfacial Electron Transfer in Microbial Fuel Cells

Interfacial electron transfer between an electroactive biofilm and an electrode is a crucial step for microbial fuel cells (MFCs) and other bio-electrochemical systems. Here, a hierarchically porous nitrogen-doped carbon nanotubes (CNTs)/reduced graphene oxide (rGO) composite with polyaniline as the nitrogen source has been developed for the MFC anode. This composite possesses a nitrogen atom-doped surface for improved flavin redox reaction and a three-dimensional hierarchically porous structure for rich bacterial biofilm growth. The maximum power density achieved with the N-CNTs/rGO anode in S. putrefaciens CN32 MFCs is 1137 mW m^-2, which is 8.9 times compared with that of the carbon cloth anode and also higher than those of N-CNTs (731.17 mW m^-2), N-rGO (442.26 mW m^-2), and the CNTs/rGO (779.9 mW m^-2) composite without nitrogen doping. The greatly improved bio-electrocatalysis could be attributed to the enhanced adsorption of flavins on the N-doped surface and the high density of biofilm adhesion for fast interfacial electron transfer. This work reveals a synergistic effect from pore structure tailoring and surface chemistry designing to boost both the bio- and electrocatalysis in MFCs, which also provide insights for the bioelectrode design in other bio-electrochemical systems.

Core-Shell Nitrogen-Doped Carbon Hollow Spheres/Co3 O4 Nanosheets as Advanced Electrode for High-Performance Supercapacitor

Co₃ O₄ /nitrogen-doped carbon hollow spheres (Co₃ O₄ /NHCSs) with hierarchical structures are synthesized by virtue of a hydrothermal method and subsequent calcination treatment. NHCSs, as a hard template, can aid the generation of Co₃ O₄ nanosheets on its surface; while SiO₂ spheres, as a sacrificed-template, can be dissolved in the process. The prepared Co₃ O₄ /NHCS composites are investigated as the electrode active material. This composite exhibits an enhanced performance than Co₃ O₄ itself. A higher specific capacitance of 581 F g^-1 at 1 A g^-1 and a higher rate performance of 91.6% retention at 20 A g^-1 are achieved, better than Co₃ O₄ nanorods (318 F g^-1 at 1 A g^-1 and 67.1% retention at 20 A g^-1 ). In addition, the composite is employed as a positive electrode to fabricate an asymmetric supercapacitor. The device can deliver a high energy density of 34.5 Wh kg^-1 at the power density of 753 W kg^-1 and display a desirable cycling stability. All of these attractive results make the unique hierarchical Co₃ O₄ /NHCS core-shell structure a promising electrode material for high-performance supercapacitors.

Yolk Type Asymmetric Ag–Cu2O Hybrid Nanoparticles on Graphene Substrate as Efficient Electrode Material for Hybrid Supercapacitors

Yolk type asymmetric Ag–Cu2O hybrid nanostructures are in situ synthesized on reduced graphene oxide (RGO) sheets for the first time under one pot hydrothermal mild reaction condition. The co-reduction method provides a facile and straight forward approach to metal/metal oxide hybrid NPs growth on graphene nanosheets and the nano heterostructures are found to be homogeneously distributed over graphene sheets with unique yolk type morphology forming Ag–Cu2O/RGO nanocomposite (NC). The supercapacitor performances of the NCs are evaluated in aqueous 6.0 M KOH by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge-discharge (GCD) in two electrode cell assembly using Ag-Cu2O/RGO as electrode material. The ternary NCs exhibit excellent hybrid capacitance behavior having ~812 Fg−1 specific capacitance value with high energy density 27.2 Wh kg−1 and power density 285 W kg−1, respectively, at current density of 0.5 Ag−1 that suits for potential applications in hybrid capacitor. The high capacitance property of ternary NCs without use of binder can be attributed to excellent electronic/ionic conductivity due to presence of highly conductive graphene sheets in addition of noble Ag metal and unique yolk type morphology which causes faster electronic conduction among different components of the electrode material.

Graphene and activated carbon-wrapped and Co3O4-intercalated 3D sandwich nanostructure hybrid for high-performance supercapacitance

The graphene/Co₃O₄/activated carbon (GCA) 1 : 9 capacitor shows the best electrochemical properties with Co₃O₄ particles that were homogeneously dispersed between the graphene/Co₃O₄ (GC) layers.

Hybrid Reduced Graphene Oxide Nanosheet Supported Mn-Ni-Co Ternary Oxides for Aqueous Asymmetric Supercapacitors

Hybrid reduced graphene oxide (RGO) nanosheet supported Mn-Ni-Co ternary oxides (MNCO) are prepared through a facile coprecipitation reaction with a subsequent calcination process as electrodes for supercapacitors. Electrochemical measurements prove that RGO can significantly improve the supercapacitive behaviors, compared with the pure MNCO electrode. A high specific capacity of 646.1 C g^-1 at 1 A g^-1 can be achieved and about 89.6% of the capacity can be remained at 30 A g^-1 relative to that of the low-current capacity, indicating attractive rate capability of the RGO-MNCO electrode. Moreover, an asymmetric supercapacitor (ASC) device is fabricated with nitrogen-enriched RGO as the negative electrode and the synthesized RGO-MNCO as the positive electrode. Electrochemical performances investigated at different potential range reveal that the ASC device presents excellent capacitive behavior and reversibility. A maximum energy density of 35.6 Wh kg^-1 at power density of 699.9 W kg^-1 can be delivered. Furthermore, stable cycle capability with 100% Coulombic efficiency and 77.2% the capacitance retention is also achieved after 10000 cycles. The achieved outstanding electrochemical properties indicate that the obtained RGO-MNCO electrode materials are fairly ideal for progressive supercapacitors.

Construction of Hierarchically One-Dimensional Core-Shell CNT@Microporous Carbon by Covalent Bond-Induced Surface-Confined Cross-Linking for High-Performance Supercapacitor

A covalent bond-induced surface-confined cross-linking is reported to construct one-dimensional coaxial CNT@microporous carbon composite (CNT@micro-C). Octaphenyl polyhedral oligomeric silsesquioxane (Ph-POSS) composed of eight phenyls and a -Si₈O₁₂ cage was selected as precursor for microporous carbon. The layer-by-layer cross-linking of phenyl anchored Ph-POSS on the surface of CNT; after carbonization and etching of -Si₈O₁₂ cages, CNT@micro-C including CNT core and microporous carbon shell was harvested. The thickness of microporous carbon shell can be well tailored from 6.0 to 20.0 nm, and the surface area of CNT@micro-C can reach 1306 m² g^-1. CNT@micro-C combines the structural advantages of CNT and microporous carbon, presenting large surface area, high electrical conductivity, fast ion transfer speed, and short ion transfer distance. When used as electrode material, CNT@micro-C reveals superior supercapacitive performance; for example, its capacitance can reach 243 F g^-1 at 0.5 A g^-1 and slightly decreases to 209 F g^-1 at 10 A g^-1, indicating a capacitance retention of 86%. Even at a very high scan rate of 50 A g^-1, a high capacitance of 177 F g^-1 is retained, giving a capacitance retention of 73%.

Self-Assembled and One-Step Synthesis of Interconnected 3D Network of Fe3O4/Reduced Graphene Oxide Nanosheets Hybrid for High-Performance Supercapacitor Electrode

In the present work, we have synthesized three-dimensional (3D) reduced graphene oxide nanosheets (rGO NSs) containing iron oxide nanoparticles (Fe₃O₄ NPs) hybrids (3D Fe₃O₄/rGO) by one-pot microwave approach. Structural and morphological studies reveal that the as-synthesized Fe₃O₄/rGO hybrids were composed of faceted Fe₃O₄ NPs induced into the interconnected network of rGO NSs. The morphologies and structures of the 3D hybrids have been characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectrometer (XPS). The electrochemical studies were analyzed by cyclic voltammetry, galvanostatic charge/discharge measurements, and electrochemical impedance spectroscopy, which demonstrate superior electrochemical performance as supercapacitors electrode application. The specific capacitances of 3D hybrid materials was 455 F g^-1 at the scan rate of 8 mV s^-1, which is superior to that of bare Fe₃O₄ NPs. Additionally, the 3D hybrid shows good cycling stability with a retention ratio of 91.4 after starting from ∼190 cycles up to 9600 cycles. These attractive results suggest that this 3D Fe₃O₄/rGO hybrid shows better performance as an electrode material for high-performance supercapacitors.

Synthesis of reduced graphene oxide nanosheet-supported agglomerated cobalt oxide nanoparticles and their enhanced electron field emission properties

The field emission properties were demonstrated of reduced graphene oxide nanosheets (rGO-NSs) containing agglomerated Co₃O₄ nanoparticles (rGO–Co₃O₄) synthesized by a one-step microwave approach.

Unique nanopetals of nickel vanadate: crystal structure elucidation and supercapacitive performance

Unique nanopetal array of nickel vanadate is explored for its crystal structure and promising pseudocapacitive performance.

Synthesis of a hierarchical cobalt sulfide/cobalt basic salt nanocomposite via a vapor-phase hydrothermal method as an electrode material for supercapacitor

A hierarchical cobalt sulfide/cobalt basic salt nanocomposite shows excellent electrochemical performances as a supercapacitor.

3D Hierarchical Co-Al Layered Double Hydroxides with Long-Term Stabilities and High Rate Performances in Supercapacitors

Three-dimensional (3D) flower-like Co-Al layered double hydroxide (Co-Al-LDH) architectures composed of atomically thin nanosheets were successfully synthesized via a hydrothermal method in a mixed solvent of water and butyl alcohol. Owing to the unique hierarchical structure and modification by butyl alcohol, the electrochemical stability and the charge/mass transport of the Co-Al-LDHs was improved. When used in supercapacitors, the obtained Co-Al-LDHs deliver a high specific capacitance of 838 F g^-1 at a current density of 1 A g^-1 and excellent rate performance (753 F g^-1 at 30 A g^-1 and 677 F g^-1 at 100 A g^-1), as well as excellent cycling stability with 95% retention of the initial capacitance even after 20,000 cycles at a current density of 5 A g^-1. This work provides a promising alternative strategy to enhance the electrochemical properties of supercapacitors.

In Situ Fabrication of CoS and NiS Nanomaterials Anchored on Reduced Graphene Oxide for Reversible Lithium Storage

CoS and NiS nanomaterials anchored on reduced graphene oxide (rGO) sheets, synthesized via combination of hydrothermal with sulfidation process, are studied as high-capacity anode materials for the reversible lithium storage. The obtained CoS nanofibers and NiS nanoparticles are uniformly dispersed on rGO sheets without aggregation, forming the sheet-on-sheet composite structure. Such nanoarchitecture can not only facilitate ion/electron transport along the interfaces, but also effectively prevent metal-sulfide nanomaterials aggregation during the lithium reactions. Both the rGO-supported CoS nanofibers (NFs) and NiS nanoparticles (NPs) show superior lithium storage performance. In particular, the CoS NFs-rGO electrodes deliver the discharge capacity as high as 939 mA h g(-1) after the 100th cycle at 100 mA g(-1) with Coulombic efficiency above 98%. This strategy for construction of such composite structure can also synthesize other metal-sulfide-rGO nanomaterials for high-capacity lithium-ion batteries.