Hybrid Hairy Janus Particles Decorated with Metallic Nanoparticles for Catalytic Applications

A novel synthesis method of magnetic Janus particles for wastewater applications

HYPOTHESIS

Magnetic particles are widely used in many adsorption and removal processes. Among the many types of magnetic colloids, magnetic Janus particles offer significant possibilities for the effective removal of several components from aqueous solutions. Nevertheless, the synthesis of structures integrating different types of materials requires scalable fabrication processes to overcome the limitations of the available methodologies. Herein, we hypothesized a fabrication process for dual-surface functionalized magnetic Janus particles.

EXPERIMENTS

The primary silica particles with surface-attached amine groups are further asymmetrically modified by iron oxide nanoparticles, exploiting Pickering emulsion and electroless deposition techniques. The dual surface functionality of the particles is designed for its versatility and demonstrated in two wastewater-related applications.

FINDINGS

We show that our design can simultaneously remove chromium (VI) and phenol from aqueous solution. The fabricated magnetic-responsive Janus particles are also an effective adsorbent for genomic Deoxyribonucleic acid (DNA) and show superior performance to commercial magnetic beads. Thus, this study provides a novel platform for designing magnetic Janus particles with multifunctional surfaces for wastewater treatment applications.

Amphiphilic Janus Particles for Aerobic Alcohol Oxidation in Oil Foams

Amphiphilic Janus silica particles, tunable with oleophobic-oleophilic properties and low fluorine content (8 wt % F), exhibited prominent foamability for a variety of aromatic alcohols at low particle concentrations (<1 wt %) compared to randomly functionalized silica particles. When selectively loaded with Pd nanoparticles on the oleophilic hemisphere, the particles displayed more than a 2-fold increase in catalytic activity for the aerobic oxidation of benzyl alcohol compared to nonfoam bulk catalysis under ambient O2 pressure. The particles were conveniently recycled with high foamability and catalytic activity maintained for at least five consecutive runs.

Controlled Surface Textures of Elastomeric Polyurethane Janus Particles: A Comprehensive Review

Colloidal particle research has witnessed significant advancements in the past century, resulting in a plethora of studies, novel applications, and beneficial products. This review article presents a cost-effective and low-tech method for producing Janus elastomeric particles of varied geometries, including planar films, spherical particles, and cylindrical fibers, utilizing a single elastomeric material and easily accessible chemicals. Different surface textures are attained through strain application or solvent-induced swelling, featuring well-defined wavelengths ranging from sub-microns to millimeters and offering easy adjustability. Such versatility renders these particles potentially invaluable for medical applications, especially in bacterial adhesion studies. The coexistence of "young" regions (smooth, with a small surface area) and "old" regions (wrinkled, with a large surface area) within the same material opens up avenues for biomimetic materials endowed with additional functionalities; for example, a Janus micromanipulator where micro- or nano-sized objects are grasped and transported by an array of wrinkled particles, facilitating precise release at designated locations through wrinkle pattern adjustments. This article underscores the versatility and potential applications of Janus elastomeric particles while highlighting the intriguing prospects of biomimetic materials with controlled surface textures.

Sweet Janus Particles: Multifunctional Inhibitors of Carbohydrate-Based Bacterial Adhesion

Escherichia coli and other bacteria use adhesion receptors, such as FimH, to attach to carbohydrates on the cell surface as the first step of colonization and infection. Efficient inhibitors that block these interactions for infection treatment are multivalent carbohydrate-functionalized scaffolds. However, these multivalent systems often lead to the formation of large clusters of bacteria, which may pose problems for clearing bacteria from the infected site. Here, we present Man-containing Janus particles (JPs) decorated on one side with glycomacromolecules to target Man-specific adhesion receptors of E. coli. On the other side, poly(N-isopropylacrylamide) is attached to the particle hemisphere, providing temperature-dependent sterical shielding against binding and cluster formation. While homogeneously functionalized particles cluster with multiple bacteria to form large aggregates, glycofunctionalized JPs are able to form aggregates only with individual bacteria. The formation of large aggregates from the JP-decorated single bacteria can still be induced in a second step by increasing the temperature and making use of the collapse of the PNIPAM hemisphere. This is the first time that carbohydrate-functionalized JPs have been derived and used as inhibitors of bacterial adhesion. Furthermore, the developed JPs offer well-controlled single bacterial inhibition in combination with cluster formation upon an external stimulus, which is not achievable with conventional carbohydrate-functionalized particles.

Surface Functionalization with Polymer Brushes via Surface-Initiated Atom Transfer Radical Polymerization: Synthesis, Applications, and Current Challenges

Polymer brushes have received great attention in recent years due to their distinctive properties and wide range of applications. The synthesis of polymer brushes typically employs surface-initiated atom transfer radical polymerization (SI-ATRP) techniques. To realize the control of the polymerization process in different environments, various SI-ATRP techniques triggered by different stimuli have been developed. This review focuses on the latest developments in different stimuli-triggered SI-ATRP methods, such as electrochemically mediated, photoinduced, enzyme-assisted, mechanically controlled, and organocatalyzed ATRP. Additionally, SI-ATRP technology triggered by a combination of multiple stimuli sources is also discussed. Furthermore, the applications of polymer brushes in lubrication, biological applications, antifouling, and catalysis are also systematically summarized and discussed. Despite the advancements in the synthesis of various types of 1D, 2D, and 3D polymer brushes via controlled radical polymerization, contemporary challenges remain in the quest for more efficient and straightforward synthetic protocols that allow for precise control over the composition, structure, and functionality of polymer brushes. We anticipate the readers could promote the understanding of surface functionalization based on ATRP-mediated polymer brushes and envision future directions for their application in surface coating technologies.

Janus Composite Particles and Interfacial Catalysis Thereby

Janus composite particles (JPs) with distinct compartmentalization of varied components thus performances and anisotropic shape display a variety of properties and have demonstrated great potentials in diversify practical applications. Especially, the catalytic JPs are advantageous for multi-phase catalysis with much easier separation of products and recycling the catalysts. In the first section of this review, typical methods to synthesize the JPs with varied morphologies are briefly surveyed in the category of polymeric, inorganic and polymer/inorganic composite. In the main section, recent progresses of the JPs in emulsion interfacial catalysis are summarized covering organic synthesis, hydrogenation, dye degradation, and environmental chemistry. The review will end by calling more efforts toward precision synthesis of catalytic JPs at large scale to meet the stringent requirements in practical applications such as catalytic diagnosis and therapy by the functional JPs.

Aggregation of amphiphilic nanocubes in equilibrium and under shear

We investigate the self-assembly of amphiphilic nanocubes into finite-sized aggregates in equilibrium and under shear, using molecular dynamics (MD) simulations and kinetic Monte Carlo (KMC) calculations. These patchy nanoparticles combine both interaction and shape anisotropy, making them valuable models for studying folded proteins and DNA-functionalized nanoparticles. The nanocubes can self-assemble into various finite-sized aggregates ranging from rods to self-avoiding random walks, depending on the number and placement of the hydrophobic faces. Our study focuses on suspensions containing multi- and one-patch cubes, with their ratio systematically varied. When the binding energy is comparable to the thermal energy, the aggregates consist of only few cubes that spontaneously associate/dissociate. However, highly stable aggregates emerge when the binding energy exceeds the thermal energy. Generally, the mean aggregation number of the self-assembled clusters increases with the number of hydrophobic faces and decreases with increasing fraction of one-patch cubes. In sheared suspensions, the more frequent collisions between nanocube clusters lead to faster aggregation dynamics but also to smaller terminal steady-state mean cluster sizes. The results from the MD and KMC simulations are in excellent agreement for all investigated two-patch cases, whereas the three-patch cubes form systematically smaller clusters in the MD simulations compared to the KMC calculations due to finite-size effects and slow aggregation kinetics. By analyzing the rate kernels, we are able to identify the primary mechanisms responsible for (shear-induced) cluster growth and breakup. This understanding allows us to tune nanoparticle and process parameters to achieve desired cluster sizes and shapes.

Modular Attachment of Nanoparticles on Microparticle Supports via Multifunctional Polymers

Nanoparticles are key to a range of applications, due to the properties that emerge as a result of their small size. However, their size also presents challenges to their processing and use, especially in relation to their immobilization on solid supports without losing their favorable functionalities. Here, we present a multifunctional polymer-bridge-based approach to attach a range of presynthesized nanoparticles onto microparticle supports. We demonstrate the attachment of mixtures of different types of metal-oxide nanoparticles, as well as metal-oxide nanoparticles modified with standard wet chemistry approaches. We then show that our method can also create composite films of metal and metal-oxide nanoparticles by exploiting different chemistries simultaneously. We finally apply our approach to the synthesis of designer microswimmers with decoupled mechanisms of steering (magnetic) and propulsion (light) via asymmetric nanoparticle binding, aka Toposelective Nanoparticle Attachment. We envision that this ability to freely mix available nanoparticles to produce composite films will help bridge the fields of catalysis, nanochemistry, and active matter toward new materials and applications.

Atomically Dispersed Fe/N4 and Ni/N4 Sites on Separate-Sides of Porous Carbon Nanosheets with Janus Structure for Selective Oxygen Electrocatalysis

Dual single atoms catalysts have promising application in bifunctional electrocatalysis due to their synergistic effect. However, how to balance the competition between rate-limiting steps (RDSs) of reversible oxygen reduction and oxygen evolution reaction (OER) and fully expose the active centers by reasonable structure design remain enormous challenges. Herein, Fe/N₄ and Ni/N₄ sites separated on different sides of the carbon nanosheets with Janus structure (FeNi_jns /NC) is synthesized by layer-by-layer assembly method. Experiments and calculations reveal that the side of Fe/N₄ is beneficial to oxygen reduction reaction (ORR) and the Ni/N₄ side is preferred to OER. Such Janus structure can take full advantage of two separate-sides of carbon nanosheets and balance the competition of RDSs during ORR and OER. FeNi_jns /NC possesses superior ORR and OER activity with ORR half-wave potential of 0.92 V and OER overpotential of 440 mV at J = 10 mA cm^-2 . Benefiting from the excellent bifunctional activities, FeNi_jns /NC assembled aqueous Zn-air battery (ZAB) demonstrates better maximum power density, and long-term stability (140 h) than Pt/C+RuO₂ catalyst. It also reveals superior flexibility and stability in solid-state ZAB. This work brings a novel perspective for rational design and understanding of the catalytic mechanisms of dual single atom catalysts.

Effects of the polymer glass transition on the stability of nanoparticle dispersions

In addition to the repulsive and attractive interaction forces described by Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, many charged colloid systems are stabilized by non-DLVO contributions stemming from specific material attributes. Here, we investigate non-DLVO contributions to the stability of polymer colloids stemming from the intra-particle glass transition temperature (T_g). Flash nanoprecipitation is used to fabricate nanoparticles (NPs) from a library of polymers and dispersion stability is studied in the presence of both hydrophilic and hydrophobic salts. When adding KCl, stability undergoes a discontinuous decrease as T_g increases above room temperature, indicating greater stability of rubbery NPs over glassy NPs. Glassy NPs are also found to interact strongly with hydrophobic phosphonium cations (PR₄⁺), yielding charge inversion and intermediate aggregation while rubbery NPs resist ion adsorption. Differences in the lifetime of ionic structuration within mobile surface layers is presented as a potential mechanism underlying the observed phenomenon.

Task-Specific Janus Materials in Heterogeneous Catalysis

Janus materials are anisotropic nano- and microarchitectures with two different faces consisting of distinguishable or opposite physicochemical properties. In parallel with the discovery of new methods for the fabrication of these materials, decisive progress has been made in their application, for example, in biological science, catalysis, pharmaceuticals, and, more recently, in battery technology. This Minireview systematically covers recent and significant achievements in the application of task-specific Janus nanomaterials as heterogeneous catalysts in various types of chemical reactions, including reduction, oxidative desulfurization and dye degradation, asymmetric catalysis, biomass transformation, cascade reactions, oxidation, transition-metal-catalyzed cross-coupling reactions, electro- and photocatalytic reactions, as well as gas-phase reactions. Finally, an outlook on possible future applications is given.

Inorganic material-based Janus nanosheets: asymmetrically functionalized 2D-inorganic nanomaterials

During the past decade, various inorganic material-based Janus nanosheets have been prepared and their applications have been proposed. Inorganic material-based Janus nanosheets have various advantages over polymer-based Janus nanosheets, including the maintenance of their characteristic two-dimensional shape, and are expected to be applied as unique functional materials. Methods for regioselective functionalization of the two sides of the individual nanosheets are extremely important for the development of inorganic material-based Janus nanosheets. In this review, the preparation methods and applications of inorganic material-based Janus nanosheets are summarized from the point of view of inorganic nanosheet functionalization.

Rashba Splitting and Electronic Valley Characteristics of Janus Sb and Bi Topological Monolayers

Janus Sb and Bi monolayers as a new class of 2D topological insulator materials, which could be fulfilled by asymmetrical functionalizations with methyl or hydroxyl, are demonstrated by first-principles spin–orbit coupling (SOC) electronic structure calculations to conflate nontrivial topology, Rashba splitting and valley-contrast circular dichroism. Cohesive energies and phonon frequency dispersion spectra indicate that all Janus Sb and Bi monolayers possess a structural stability in energetic statics but represent virtual acoustic phonon vibrations of the hydrogen atoms passivating on monolayer surfaces. Band structures of Janus Sb and Bi monolayers and their nanoribbons demonstrate they are nontrivial topological insulators. Rashba spin splitting at G point in Brillouin zone of Janus Bi monolayers arises from the strong SOC p_x and p_y orbitals of Bi bonding atoms together with the internal out-of-plane electric field caused by asymmetrical functionalization. Janus Sb and Bi monolayers render direct and indirect giant bandgaps, respectively, which are derived from the strong SOC p_x and p_y orbitals at band-valley Brillouin points K and K′ where valley-selective circular dichroism of spin valley Hall insulators is also exhibited.

Compositionally Anisotropic Colloidal Surfactant Decorated with Dual Metallic Nanoparticles as a Pickering Emulsion Stabilizer and Their Application in Catalysis

We aim to introduce compositionally anisotropic Janus particles, hemispheres of which was modified by hydrophilic poly(2-dimethyl amino ethyl methacrylate) [poly(DMAEMA)] brushes to display amphiphilic surfactant-type characteristics. Acquired by the electrohydrodynamic co-jetting technique, these colloidal surfactants were employed to stabilize octanol/water-based Pickering emulsion, which shows prolonged stability for more than 4 months. To explore their potential as the interfacial catalyst, iron(0) nanoparticles were incorporated in one hemisphere during electrojetting, whereas gold nanoparticles (GNPs) were patched onto the surface of the other hemisphere, which was previously modified by the poly(DMAEMA) brush. Ultimately, simultaneous rapid reduction (100% conversion in 1 min) of p-nitrophenol or methyl orange (MO) by GNPs in the aqueous phase and dechlorination of trichloroethylene (a hazardous chlorinated solvent waste) present in the octanol phase were accomplished at the organic-water interface stabilized by the Janus particles decorated by dual metallic nanoparticles. In addition, facile recovery and recyclability of the catalyst were also achieved. The novel colloidal surfactant demonstrated in this study may open up a new avenue to accomplish catalysis of several organic reactions occurring at the water-oil interface.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Advances in design and applications of polymer brush modified anisotropic particles

Current advancements in the creation of anisotropy in particles and their surface modification with polymer brushes have established a new class of hybrid materials termed polymer brush modified anisotropic particles (PBMAP). PBMAPs display unique property combinations, e.g., multi-functionality in multiple directions along with smart behavior, which is not easily achievable in traditional hybrid materials. Typically, anisotropic particles can be categorized based on three different factors, such as shape anisotropy (geometry driven), compositional anisotropy (functionality driven), and surface anisotropy (spatio-selective surface modification driven). In this review, we have particularly focused on the synthetic strategies to construct the various type of PBMAPs based on inorganic or organic core which may or may not be isotropic in nature, and their applications in various fields ranging from drug delivery to catalysis. In addition, superior performances and fascinating properties of PBMAPs over their isotropic analogues are also highlighted. A brief overview of their future developments and associated challenges have been discussed at the end.

Facile and scalable synthesis of functional Janus nanosheets - A polyethoxysiloxane assisted surfactant-free high internal phase emulsion approach

HYPOTHESIS

Janus nanosheets, which have two surfaces of different functionalities, exhibit unique interfacial properties. In this work, we propose a facile and scalable technique for preparation of silica-based Janus nanosheets, which is based on formation of high internal phase water-in-oil emulsions stabilized solely by alkyl-substituted polyethoxysiloxanes due to their hydrolysis-induced interfacial activity.

EXPERIMENTS

Janus nanosheets are then obtained by crushing the silica foams converted from such emulsions. The morphology of Janus nanosheets is investigated by field-emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The chemical structure of functional silica materials is characterized by Fourier transform infrared spectroscopy (FT-IR). The asymmetric structure of silica nanosheets is observed by confocal laser scanning microscopy.

FINDINGS

The resulting nanosheets have a rough hydrophobic surface and a smooth hydrophilic one, and are capable of stabilizing Pickering oil-in-water emulsions. Remarkably, pH-responsiveness of emulsions can be attained using the nanosheets whose hydrophilic surface is substituted with amino groups. Fast oil-water separation is achieved by the Janus nanosheets, which has been demonstrated by the nanosheets with a polystyrene-coated hydrophobic surface. This work paves a new avenue for large-scale production of functional silica-based Janus nanosheets suitable for numerous promising applications.

Construction of polymer brush-decorated amphiphilic Janus graphene oxide nanosheets via a Pickering emulsion template for catalytic applications

2D amphiphilic Janus GO nanocatalysts were prepared using Pickering emulsions and grafted polymer brushes, with excellent performance in homogeneous and interfacial catalysis.

Bifunctional Janus Silica Spheres for Pickering Interfacial Tandem Catalysis

Nature provides much inspiration for the design of multistep conversion processes, with numerous reactions running simultaneously and without interference in cells, for example. A key challenge in mimicking nature's strategies is to compartmentalize incompatible reagents and catalysts, for example, for tandem catalysis. Here, we present a new strategy for antagonistic catalyst compartmentalization. The synthesis of bifunctional Janus catalyst particles carrying acid and base groups on the particle's opposite patches is reported as is their application as acid-base catalysts in oil/water emulsions. The synthesis strategy involved the use of monodisperse, hydrophobic and amine-functionalized silica particles (SiO₂ -NH₂ -OSi(CH₃ )₃ ) to prepare an oil-in-water Pickering emulsion (PE) with molten paraffin wax. After solidification, the exposed patch of the silica particles was selectively etched and refunctionalized with acid groups to yield acid-base Janus particles (Janus A-B). These materials were successfully applied in biphasic Pickering interfacial catalysis for the tandem dehydration-Knoevenagel condensation of fructose to 5-(hydroxymethyl)furfural-2-diethylmalonate (5-HMF-DEM) in a water/4-propylguaiacol PE. The results demonstrate the advantage of rapid extraction of 5-hydroxymethylfurfural (5-HMF), a prominent platform molecule prone to side product formation in acidic media. A simple strategy to tune the acid/base balance using PE with both Janus A-B and monofunctional SiO₂ -NH₂ -OSi(CH₃ )₃ base catalysts proved effective for antagonistic tandem catalysis.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

Flagellated Janus particles for multimodal actuation and transport

Catalytic Janus particles rely on chemical decomposition to self-propel and have displayed enormous potential for targeted drug delivery and cellular penetration. Catalytic propulsion mechanisms are limiting, however, with fuel requirements and specialized fluid properties being necessary to achieve propulsion. We have improved the dynamic propulsion of catalytic Janus particles by functionalizing flagellar filaments to one of their hemispheres. Flagellated Janus particles, torqued by rotating magnetic fields, swim along their rotation axis using the explicit chirality and flexibility of flagella, mimicking flagellar rotation of live bacteria. Depending on the working fluid, flagellated Janus particles can propel using either catalytic or swimming propulsion. We demonstrate experimentally that flagellated Janus particles behave predictably under the two actuation modes and can precisely follow trajectories under closed-loop feedback control. Flagellated Janus particles were demonstrated to swim in both Newtonian and shear-thickening fluids. These are the first Janus particles developed that can be propelled interchangeably between catalytic and flagellar swimming propulsion, allowing two distinct propulsion mechanisms for future use within in vivo operations.

Directional self-assembly of anisotropic bimetal-poly(aniline) nanostructures for rheumatoid arthritis diagnosis in multiplexing

Anisotropic organic-inorganic hybrid nanoparticles possessing different functionalities and physicochemical properties from each compartment have attracted significant interest for the development of advanced functional materials. Moreover, their self-assembled structures exhibit unique optical properties for photonics-based biosensing. We report herein the fabrication of anisotropic bimetal-polymer nanoparticles (ABPNs) via combination of oxidative polymerization and additional growth of metallic nanoparticles on Au seeds as well as their directional clustering mediated via noncovalent interactions. Polymerization of anilines for poly (aniline) shell was conducted by reducing silver nitrate onto the Au seed in the presence of a surfactant, giving rise to spatially distinct bimetallic Au core and Ag shell compartment and the poly (aniline) counter-one that comprise the ABPNs. Furthermore, ABPNs were directionally clustered in a controlled manner via hydrophobic interaction, when the bimetallic compartment was selectively modified. These nanoclusters showed highly enhanced optical properties owing to the increased electromagnetic fields while the poly (aniline) being used to offer antibody binding capacity. Taking advantages of those properties of the ABPN nanoclusters, surface-enhanced Raman scattering (SERS) intensity-based quantification of two different biomarkers: autoantibodies against cyclic citrullinated peptide and rheumatoid factor was demonstrated using ABPN nanoclusters as SERS nanoprobes. Conclusively, this work has great potential to satisfy a need for multiplexing in diagnosis of early stage of rheumatoid arthritis.

Dielectrophoretic Manipulation of Janus Particle in Conductive Media for Biomedical Applications

Janus particles are applied to many fields including biomedical applications. To expand the usability of Janus particles, a technique to manipulate the particle movement is required. A dielectrophoresis (DEP) method can be a promising candidate; however, independent manipulation or separation of Janus particle by DEP is still challenging. Additionally, DEP of Janus particles in conductive media is important especially for biomedical applications where ion-rich media are typically used. Here, the experimental results of DEP-induced transport and separation of the Janus particle in conductive media are presented. To predict the DEP behavior, the Clausius-Mossotti (CM) factors of both Janus and homogeneous particles are calculated, depending on the alternating current (AC) frequency and medium conductivity. The Janus particles show the positive-DEP behavior at the entire AC frequency region tested due to the metal-coated half surface. On the other hand, the homogeneous particles show the negative-DEP behavior at the high AC frequency or in conductive media. Additionally, in the conductive media, an electrohydrodynamic flow hinders the DEP-driven particle transport below MHz AC frequencies. Finally, the separation of the Janus particles from the homogeneous ones is experimentally demonstrated and the separation efficiency is discussed based on the evaluation parameters established in this study.

Terpolymer Multicompartment Nanofibers as Templates for Hybrid Pt Double Helices

Hybrid inorganic/block copolymer (BCP) materials have become increasingly relevant for application in heterogeneous catalysis, microelectronics, and nanomedicine. While block copolymer templates are widely used for the formation of inorganic nanostructures, multicompartment templates could give access to more complex shapes and inner structures that are challenging to obtain with traditional processes. Here, we report the formation and characterization of hybrid platinum/polymer helices using multicompartment nanofibers (MCNFs) of polystyrene-block-polybutadiene-block-poly(tert-butyl methacrylate) (PS-b-PB-b-PT) triblock terpolymers as templates. Cross-linking of a PS-b-PB-b-PT helix-on-cylinder morphology resulted in uniform nanofibers with a diameter of 90 nm and a length of several micrometers, as well as an inner PB double helix (diameter 35 nm, pitch 25 nm, core 12 nm). The PB double helix served as template for the sol-gel reaction of H₂PtCl₆ into hybrid Pt double helices (Pt@MCNFs) as verified by STEM, electron tomography, AFM, and SEM. Carbonization of the Pt hybrids into Pt decorated carbon nanofibers (Pt@C) was followed in situ on a TEM heating state. Gradual heating from 25 to 1000 °C induced fusion of amorphous Pt NPs into larger crystalline Pt NP, which sheds light on the aging of Pt NPs in BCP scaffolds under high temperature conditions. The Pt@MCNFs were further sulfonated and incorporated into a filter to catalyze a model compound in a continuous flow process.

Palladium nanoparticles anchored on amphiphilic Janus-type cellulose nanocrystals for Pickering interfacial catalysis

Developing green and sustainable Pickering interfacial catalysts for organic reactions in water is of great importance to both the environment and human health. In this study, Janus-type amphiphilic cellulose nanocrystals (CNCs) were synthesized by the surface modification of hydrophilic CNCs with hydrophobic alkyl chains for efficient Pickering emulsion stabilization. Further deposition of palladium nanoparticles on amphiphilic CNCs provides catalytic activity for organic reactions in water, which occur at the interface of water and the organic reactant phase. Different reactions, hydrogenation and C-C coupling, were performed using the obtained Pickering interfacial catalyst. Excellent results were achieved in both reactions. The catalyst developed in our study is expected to advance the field of environment-friendly catalyst systems for green chemistry.

The di(thiourea)gold(I) complex [Au{S=C(NH2)2}2][SO3Me] as a precursor for the convenient preparation of gold nanoparticles

The synthesis of [Au{S=C(NH2)2}2][SO3Me] (1) (a) by the anodic oxidation of gold metal in an anolyte of thiourea and methansulfonic acid and (b) by the reaction of Au(OH)3 with an aqueous solution of methanesulfonic acid in the presence of thiourea is reported. The structure of 1 in the solid state has been determined by single-crystal X-ray diffraction showing a linear S–Au–S unit with the thiourea ligands in a leaflet structure folded by 113.2(3)°. The cation of complex 1 is a dimer, based on short S · · · C interactions between two adjacent mononuclear cations. The thermal decomposition behavior of 1 was studied by TG and TG-MS confirming that it decomposes under inert gas or oxygen atmosphere in four steps in the temperature range of 200–650°C. Initial decomposition starts with the release and fragmentation of one of the thiourea ligands, followed by the anion degradation. Powder X-ray diffraction studies specified the formation of gold metal. Based on this observation, complex 1 was used as precursor for the formation of gold nanoparticles (Au NPs) in 1-hexadecylamine (c = 4.0 mol L−1) at T = 330°C without any addition of reducing agents. TEM, electron diffraction, and UV/Vis spectroscopy studies were carried out. Au NPs of size 15 ± 4 nm were formed, showing the characteristic surface plasmon resonance at 528 nm.

Janus particles: from concepts to environmentally friendly materials and sustainable applications

Janus particles represent a unique group of patchy particles combining two or more different physical or chemical functionalities at their opposite sides. Especially, individual Janus particles (JPs) with both chemical and geometrical anisotropy as well as their assembled layers provide considerable advantages over the conventional monofunctional particles or surfactant molecules offering (a) a high surface-to-volume ratio; (b) high interfacial activity; (c) target controlling and manipulation of their interfacial activity by external signals such as temperature, light, pH, or ionic strength and achieving switching between stable emulsions and macro-phase separation; (d) recovery and recycling; (e) controlling the mass transport across the interface between the two phases; and finally (f) tunable several functionalities in one particle allowing their use either as carrier materials for immobilized catalytically active substances or, alternatively, their site-selective attachment to substrates keeping another functionality active for further reactions. All these advantages of JPs make them exclusive materials for application in (bio-)catalysis and (bio-)sensing. Considering “green chemistry” aspects covering biogenic materials based on either natural or fully synthetic biocompatible and biodegradable polymers for the design of JPs may solve the problem of toxicity of some existing materials and open new paths for the development of more environmentally friendly and sustainable materials in the very near future. Considering the number of contributions published each year on the topic of Janus particles in general, the number of contributions regarding their environmentally friendly and sustainable applications is by far smaller. This certainly pinpoints an important challenge and is addressed in this review article. The first part of the review focuses on the synthesis of sustainable biogenic or biocompatible Janus particles, as well as strategies for their recovery, recycling, and reusability. The second part addresses recent advances in applications of biogenic/biocompatible and non-biocompatible JPs in environmental and biotechnological fields such as sensing of hazardous pollutants, water decontamination, and hydrogen production. Finally, we provide implications for the rational design of environmentally friendly and sustainable materials based on Janus particles.

Controlling Catalyst-Phase Selectivity in Complex Mixtures with Amphiphilic Janus Particles

Amphiphilic Janus particles with a catalyst selectively loaded on either the hydrophobic or hydrophilic region are promising candidates for efficient and phase-selective interfacial catalysis. Here, we report the synthesis and characterization of Janus silica particles with a hydrophilic silica domain and a silane-modified hydrophobic domain produced via a wax masking technique. Palladium nanoparticles were regioselectively deposited on the hydrophobic side, and the phase selectivity of the catalytic Janus particles was established through the kinetic studies of benzyl alcohol hydrodeoxygenation (HDO). These studies indicated that the hydrophobic moiety provided nearly 100× the catalytic activity as the hydrophilic side for benzyl alcohol HDO. The reactivity was linked to the anisotropic catalyst design through microscopy of the particles. The catalysts were also used to achieve phase-specific compartmentalized hydrogenation and selective in situ catalytic degradation of a model oily pollutant in a complex oil/water mixture.

Emulsion and miniemulsion techniques in preparation of polymer nanoparticles with versatile characteristics

In recent years, polymer nanoparticles (PNPs) have found their ways into numerous applications extending from electronics to photonics, conducting materials to sensors and medicine to biotechnology. Physical properties and surface morphology of PNPs are the most important parameters that significantly affect on their exploitations and can be controlled through the synthesis process. Emulsion and miniemulsion techniques are among the most efficient and wide-spread methods for preparation of PNPs. The objective of this review is to present and highlight the recent developments in the advanced PNPs with specific properties that are produced through emulsion and miniemulsion processes.

Stabilization of Pickering Emulsions by Hairy Nanoparticles Bearing Polyanions

Pickering emulsions are increasingly applied in drug delivery, oil-water separation, composite materials preparation, and other fields. However, systematic studies on the stabilization of Pickering emulsions to satisfy the growing application demands in multiple fields with long-term conservation are rare. Compared to conventional solid nanoparticles, polyanion-modified hairy nanoparticles are more stable in practical environments and are investigated in this study. Poly (sodium p-styrenesulfonate) was grafted to a polystyrene (PS) core via a photoemulsion polymerization. A hairy nanoparticle bearing polyanions called poly (sodium p-styrenesulfonate) brush (PS@PSS) was synthesized. The size and uniformity of the Pickering emulsions stabilized by PS@PSS were investigated via a polarizing microscope. The stability of Pickering emulsions were optimized by adjusting critical factors like ultrasonic power and time, standing time, oil phases, salt concentration, and water:oil ratio. Results indicated that the Pickering emulsions could be stabilized by PS@PSS nanoparticles, which showed remarkable and adjustable partial wetting properties. It was found that the optimized conditions were ultrasonic power of 150 W, ultrasonic time of 3 min, salt concentration of 0.1 mM, oil phase of hexadecane, and water:oil ratio of 1:1. The formation and stability of Pickering emulsion are closely related to the hairy poly (sodium p-styrenesulfonate) brush layer on the nanoparticle surface.

Magnetic-Responsive Janus Nanosheets with Catalytic Properties

In this article, we describe a method to fabricate magnetic-responsive Janus nanosheets with catalytic properties via the surface protection method. Fe₃O₄ nanoparticles and PW₁₂O₄₀^3--based ionic liquid are located on the two opposite sides of the Janus nanosheets, respectively. The Janus nanosheets are characterized by Fourier transform infrared, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, and ζ-potential analyses. They are used as recyclable catalysts to the esterification reaction of methanol and oleic acid for their magnetic-responsive and catalytic properties. The esterification ratio is up to 80% and there is nearly no change when Fe₃O₄ nanoparticles/PW₁₂O₄₀^3--based ionic liquid composite nanosheets were recycled four times.

Hybrid Janus Particles: Challenges and Opportunities for the Design of Active Functional Interfaces and Surfaces

Janus particles are a unique class of multifunctional patchy particles combining two dissimilar chemical or physical functionalities at their opposite sides. The asymmetry characteristic for Janus particles allows them to self-assemble into sophisticated structures and materials not attainable by their homogeneous counterparts. Significant breakthroughs have recently been made in the synthesis of Janus particles and the understanding of their assembly. Nevertheless, the advancement of their applications is still a challenging field. In this Review, we highlight recent developments in the use of Janus particles as building blocks for functional materials. We provide a brief introduction into the synthetic strategies for the fabrication of JPs and their properties and assembly, outlining the existing challenges. The focus of this Review is placed on the applications of Janus particles for active interfaces and surfaces. Active functional interfaces are created owing to the stabilization efficiency of Janus particles combined with their capability for interface structuring and functionalizing. Moreover, Janus particles can be employed as building blocks to fabricate active functional surfaces with controlled chemical and topographical heterogeneity. Ultimately, we will provide implications for the rational design of multifunctional materials based on Janus particles.

A repertoire of biomedical applications of noble metal nanoparticles

The emerging properties of noble metal nanoparticles are attracting huge interest from the translational scientific community. In this feature article, we highlight recent advances in the adaptation of noble metal nanomaterials and their biomedical applications in therapeutics, diagnostics and sensing.

An ionic liquid-functionalized amphiphilic Janus material as a Pickering interfacial catalyst for asymmetric sulfoxidation in water

Novel IL-functionalized amphiphilic Janus chiral salen Ti^IV catalysts behaved as Pickering interfacial catalysts, dramatically accelerating asymmetric sulfoxidation with aq. H₂O₂ in water through the formation of stable Pickering emulsions.

Thermoreversible Surface Polymer Patches: A Cryogenic Transmission Electron Microscopy Investigation

Hybrid core-shell type nanoparticles from gold nanoparticle cores and poly( N-isopropylacrylamide) shells were investigated with regard to their structural plasticity. Reversible addition-fragmentation chain transfer polymerization was used to synthesize well-defined polymers that can be readily anchored onto the gold nanoparticle surface. The polymer shell morphologies were directly visualized in their native solution state at high resolution by cryogenic transmission electron microscopy, and the microscopic results were further corroborated by dynamic light scattering. Different environmental conditions and brush architectures are covered by our experiments, which leads to distinct thermally induced responses. These responses include constrained dewetting of the nanoparticle surface at temperatures above the lower critical solution temperature of poly( N-isopropylacrylamide), leading to surface polymer patches. This effect provides a novel approach toward breaking the symmetry of nanoparticle interactions, and we show first evidence for its impact on the formation of colloidal superstructures.

Gelation of patchy ligand shell nanoparticles decorated by liquid-crystalline ligands: computer simulation study

We consider the coarse-grained modelling of patchy ligand shell nanoparticles with liquid crystalline ligands. The cases of two, three, four and six symmetrically arranged patches of ligands are discussed, as well as the cases of their equatorial and icosahedral arrangement. A solution of decorated nanoparticles is considered within a slit-like pore with solid walls and the interior filled by a polar solvent. The ligands form physical cross-links between the nanoparticles due to strong liquid crystalline interaction, turning the solution into a gel-like structure. Gelation is carried out repeatedly starting each time from a freshly equilibrated dispersed state of nanoparticles. The gelation dynamics and the range of network characteristics of the gel are examined, depending on the type of patchy decoration and on the solution density. Emphasis is given to the theoretical prediction of the type of decoration and the solution density most suitable for producing a uniformly cross-linked and highly elastic gel structure.