Joint Effects of Photoactive TiO2 and Fluoride-Doping on SnO2 Inverse Opal Nanoarchitecture for Solar Water Splitting

Tin oxide based nanostructured materials: synthesis and potential applications

In view of their inimitable characteristics and properties, SnO₂ nanomaterials and nanocomposites have been used not only in the field of diverse advanced catalytic technologies and sensors but also in the field of energy storage such as lithium-ion batteries and supercapacitors, and in the field of energy production such as solar cells and water splitting. This review discusses the various synthesis techniques such as traditional methods, including processes like thermal decomposition, chemical vapor deposition, electrospinning, sol-gel, hydrothermal, solvothermal, and template-mediated methods and green methods, which include synthesis through plant-mediated, microbe-mediated, and biomolecule-mediated processes. Moreover, the advantages and limitations of these synthesis procedures and how to overcome them that would lead to future research are also discussed. This literature also focuses on various applications such as environmental remediation, energy production, energy storage, and removal of biological contaminants. Therefore, the rise and journey of SnO₂-based nanocomposites will motivate the modern generation of chemists to modify and design robust nanoparticles and nanocomposites that can effectively tackle significant environmental challenges. This overview concludes by providing future perspectives on research into tin oxide in synthesis and its various applications.

Host/Guest Nanostructured Photoanodes Integrated with Targeted Enhancement Strategies for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) hydrogen production from water splitting is a green technology that can solve the environmental and energy problems through converting solar energy into renewable hydrogen fuel. The construction of host/guest architecture in semiconductor photoanodes has proven to be an effective strategy to improve solar-to-fuel conversion efficiency dramatically. In host/guest photoanodes, the absorber layer is deposited onto a high-surface-area electron collector, resulting in a significant enhancements in light-harvesting as well as charge collection and separation efficiency. The present review aims to summarize and highlight recent state-of-the-art progresses in the architecture designing of host/guest photoanodes with integrated enhancement strategies, including i) light trapping effect; ii) optimization of conductive host scaffolds; iii) hierarchical structure engineering. The challenges and prospects for the future development of host/guest nanostructured photoanodes are also presented.

Recent insights into SnO2-based engineered nanoparticles for sustainable H2 generation and remediation of pesticides

Due to the ongoing industrial revolution and global health pandemics, solar-driven water splitting and pesticide degradation are highly sought to cope with catastrophes such as depleting fossil reservoirs, global warming, and environmental degradation.

Highly Efficient SO2 Sensing by Light-Assisted Ag/PANI/SnO2 at Room Temperature and the Sensing Mechanism

Sulfur dioxide (SO₂) is one of the most hazardous and common environmental pollutants. However, the development of room-temperature SO₂ sensors is seriously lagging behind that of other toxic gas sensors due to their poor recovery properties. In this study, a light-assisted SO₂ gas sensor based on polyaniline (PANI) and Ag nanoparticle-comodified tin dioxide nanostructures (Ag/PANI/SnO₂) was developed and exhibited remarkable SO₂ sensitivity and excellent recovery properties. The response of the Ag/PANI/SnO₂ sensor (20.1) to 50 ppm SO₂ under 365 nm ultraviolet (UV) light illumination at 20 °C was almost 10 times higher than that of the pure SnO₂ sensor. Significantly, the UV-assisted Ag/PANI/SnO₂ sensor had a rapid response time (110 s) and recovery time (100 s) to 50 ppm SO₂, but in the absence of light, the sensors exhibited poor recovery performance or were even severely and irreversibly deactivated by SO₂. The UV-assisted Ag/PANI/SnO₂ sensor also exhibited excellent selectivity, superior reproducibility, and satisfactory long-term stability at room temperature. The increased charge carrier density, improved charge-transfer capability, and the higher active surface of the Ag/PANI/SnO₂ sensor were revealed by electrochemical measurements and endowed with high SO₂ sensitivity. Moreover, the light-induced formation of hot electrons in a high-energy state in Ag/PANI/SnO₂ significantly facilitated the recovery of SO₂ by the gas sensor.

Atomic/molecular layer deposition for energy storage and conversion

Energy storage and conversion systems, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting, have played vital roles in the reduction of fossil fuel usage, addressing environmental issues and the development of electric vehicles. The fabrication and surface/interface engineering of electrode materials with refined structures are indispensable for achieving optimal performances for the different energy-related devices. Atomic layer deposition (ALD) and molecular layer deposition (MLD) techniques, the gas-phase thin film deposition processes with self-limiting and saturated surface reactions, have emerged as powerful techniques for surface and interface engineering in energy-related devices due to their exceptional capability of precise thickness control, excellent uniformity and conformity, tunable composition and relatively low deposition temperature. In the past few decades, ALD and MLD have been intensively studied for energy storage and conversion applications with remarkable progress. In this review, we give a comprehensive summary of the development and achievements of ALD and MLD and their applications for energy storage and conversion, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting. Moreover, the fundamental understanding of the mechanisms involved in different devices will be deeply reviewed. Furthermore, the large-scale potential of ALD and MLD techniques is discussed and predicted. Finally, we will provide insightful perspectives on future directions for new material design by ALD and MLD and untapped opportunities in energy storage and conversion.

The Impacts of Fluorine-Doped Tin Oxide Photonic Crystals on a Cadmium Sulfide-Based Photoelectrode for Improved Solar Energy Conversion under Lower Incidence

Incident angle variation of light from the sun is a critical factor for the practical utilizations of solar energy devices. These devices typically receive the zenith of photon density under a solar elevation angle of 90°, and dramatic deletion of light density along with the decrease of solar elevation angle. Photonic crystals (PCs) with long range ordered arrays possess the controllable position of the photonic stop band (PSB) reliant on several factors, including incident angles, based on the Bragg–Snell law. The multiple scattering, refraction and inhibition of charge carrier recombination within the PSB suggests the potential capability for improving the efficiency of photoactive materials. In this work, we focus on the multiple scattering and refraction effects of PCs. A photoelectrode based on photonic crystal fluorine-doped tin oxide (PC FTO) film was fabricated, which allows the embedded photoactive materials (CdS nanoparticles) to benefit from the features of PCs under variable incidence, especially under lower incidence. The photoelectrode thus has enhanced overall photoelectrochemical (PEC) efficiency in different seasons, even if the increased surface area factor is deducted.

Periodic FTO IOs/CdS NRs/CdSe Clusters with Superior Light Scattering Ability for Improved Photoelectrochemical Performance

Periodic fluorine-doped tin oxide inverse opals (FTO IOs) grafted with CdS nanorods (NRs) and CdSe clusters are reported for improved photoelectrochemical (PEC) performance. This hierarchical photoanode is fabricated by a combination of dip-coating, hydrothermal reaction, and chemical bath deposition. The growth of 1D CdS NRs on the periodic walls of 3D FTO IOs forms a unique 3D/1D hierarchical structure, providing a sizeable specific surface area for the loading of CdSe clusters. Significantly, the periodic FTO IOs enable uniform light scattering while the abundant surrounded CdS NRs induce additional random light scattering, combining to give multiple light scattering within the complete hierarchical structure, significantly improving light-harvesting of CdS NRs and CdSe clusters. The high electron collection ability of FTO IOs and the CdS/CdSe heterojunction formation also contribute to the enhanced charge transport and separation. Due to the incorporation of these enhancement strategies in one hierarchical structure, FTO IOs/CdS NRs/CdSe clusters present an improved PEC performance. The photocurrent density of FTO IOs/CdS NRs/CdSe clusters at 1.23 V versus reversible hydrogen electrode reaches 9.2 mA cm^-2 , which is 1.43 times greater than that of CdS NRs/CdSe clusters and 3.83 times of CdS NRs.

Novel multilayer TiO2 heterojunction decorated by low g-C3N4 content and its enhanced photocatalytic activity under UV, visible and solar light irradiation

In this paper, we used a facile ball milling, microwave radiation and heating treatment method to achieve the surface modification of TiO2 with low g-C3N4 concentration, and a multilayer heterojunction composite with TiO2 as the main part and g-C3N4 as the modification agent was obtained. The obtained materials were analyzed by several characterizations to get information on their chemical composition, crystalline structure, vibrational features and optical properties. The photocatalytic performance was evaluated by degradation of rhodamine B (RhB) and methylene blue (MB) under UV, visible and direct solar light irradiation. Its photocatalytic activity was enhanced depended on the novel structure of g-C3N4/TiO2 hybrid and the special Z-scheme electron-hole transfer model of multilayer heterointerfaces. The material preparation and structural features could be useful for the design and development of other photocatalysts with high photocatalytic activity.

Sn-doped 3D ATO inverse opal/hematite hierarchical structures: facile fabrication and efficient photoelectrochemical performance

The coupling of hematite with a three-dimensional (3D) conductive inverse opal (IO) skeleton provides an efficient route to enhance the photoelectrochemical (PEC) properties of hematite without changing its chemical composition. In this work, novel 3D antimony-doped SnO2 (ATO) IO/hematite heterostructures were facilely fabricated, and their PEC properties were thoroughly studied. Analysis of the morphologies and photocurrent densities of the 3D ATO IO//Fe2O3 heterostructures reveals that the high conductivity of the ATO skeleton as well as the high specific area and good light harvesting properties of the 3D IO structures greatly enhance their PEC performance. In particular, further morphology tuning by changing the diameters of the ATO IO skeletons could optimize the optical and electrical properties of the as-prepared heterostructures, demonstrating the important influence of morphology engineering on PEC performance. Moreover, after a simple Sn-doping process, the PEC properties of the as-prepared structure could be further enhanced; a photocurrent density of 1.28 mA cm-2 at 1.23 V vs. RHE was obtained under AM 1.5G illumination.

3D FTO/FTO-Nanocrystal/TiO2 Composite Inverse Opal Photoanode for Efficient Photoelectrochemical Water Splitting

A 3D fluorine-doped SnO₂ (FTO)/FTO-nanocrystal (NC)/TiO₂ inverse opal (IO) structure is designed and fabricated as a new "host and guest" type of composite photoanode for efficient photoelectrochemical (PEC) water splitting. In this novel photoanode design, the highly conductive and porous FTO/FTO-NC IO acts as the "host" skeleton, which provides direct pathways for faster electron transport, while the conformally coated TiO₂ layer acts as the "guest" absorber layer. The unique composite IO structure is fabricated through self-assembly of colloidal spheres template, a hydrothermal method and atomic layer deposition (ALD). Owing to its large surface area and efficient charge collection, the FTO/FTO-NC/TiO₂ composite IO photoanode shows excellent photocatalytic properties for PEC water splitting. With optimized dimensions of the SnO₂ nanocrystals and the thickness of the ALD TiO₂ absorber layers, the 3D FTO/FTO-NC/TiO₂ composite IO photoanode yields a photocurrent density of 1.0 mA cm^-2 at 1.23 V versus reversible hydrogen electrode (RHE) under AM 1.5 illumination, which is four times higher than that of the FTO/TiO₂ IO reference photoanode.

Single step aerosol assisted chemical vapor deposition of p–n Sn(ii) oxide–Ti(iv) oxide nanocomposite thin film electrodes for investigation of photoelectrochemical properties

Novel p–n SnO–TiO₂ nanocomposite film electrodes were fabricated through a single step method and their photoelectrocatalytic properties were evaluated.

Electrochemical synthesis of nanoporous tungsten carbide and its application as electrocatalysts for photoelectrochemical cells

Photoelectrochemical (PEC) cells are promising tools for renewable and sustainable solar energy conversion. Currently, their inadequate performance and high cost of the noble metals used in the electrocatalytic counter electrode have postponed the practical use of PEC cells. In this study, we report the electrochemical synthesis of nanoporous tungsten carbide and its application as a reduction catalyst in PEC cells, namely, dye-sensitized solar cells (DSCs) and PEC water splitting cells, for the first time. The method employed in this study involves the anodization of tungsten foil followed by post heat treatment in a CO atmosphere to produce highly crystalline tungsten carbide film with an interconnected nanostructure. This exhibited high catalytic activity for the reduction of cobalt bipyridine species, which represent state-of-the-art redox couples for DSCs. The performance of tungsten carbide even surpassed that of Pt, and a substantial increase (∼25%) in energy conversion efficiency was achieved when Pt was substituted by tungsten carbide film as the counter electrode. In addition, tungsten carbide displayed decent activity as a catalyst for the hydrogen evolution reaction, suggesting the high feasibility for its utilization as a cathode material for PEC water splitting cells, which was also verified in a two-electrode water photoelectrolyzer.

A hydrothermally grown CdS nanograin-sensitized 1D Zr:α-Fe2O3/FTO photoanode for efficient solar-light-driven photoelectrochemical performance

A CdS nanograin sensitized 1D Zr:Fe₂O₃ nanorod arrays nanostructure was hydrothermally synthesized and showed an excellent photoelectrochemical performance due to the combined effect of light absorption in CdS and effective charge transport in one dimensional Zr:Fe₂O₃ nanorod arrays.

Partial Ion Exchange Derived 2D Cu-Zn-In-S Nanosheets as Sensitizers of 1D TiO2 Nanorods for Boosting Solar Water Splitting

A facile route for the fabrication of a novel ZnS shell/Cu-Zn-In-S nanosheets/TiO₂ nanorods heterojunction was reported in this work. Especially, the quaternary Cu-Zn-In-S nanosheets were synthesized creatively from the ternary ZnIn₂S₄ nanosheets by partial exchange reaction, leading to substantial enhancement on the light absorbance. Such heterojunction could increase the surface area and accelerate the charge transfer resulting from its hierarchical 2D/1D structure and favorable energy bands. Moreover, the ZnS coating acted as a passivation layer as well as a potential barrier, significantly suppressing the interface recombination. The above synergistic effects resulted in the largely increased photocurrent density from 0.34 mA cm^-2 for the pristine TiO₂ to 0.81 mA cm^-2 for the heterojunction at 0.8 V vs RHE.

2D and 3D photonic crystal materials for photocatalysis and electrochemical energy storage and conversion

This perspective reviews recent advances in inverse opal structures, how they have been developed, studied and applied as catalysts, catalyst support materials, as electrode materials for batteries, water splitting applications, solar-to-fuel conversion and electrochromics, and finally as photonic photocatalysts and photoelectrocatalysts. Throughout, we detail some of the salient optical characteristics that underpin recent results and form the basis for light-matter interactions that span electrochemical energy conversion systems as well as photocatalytic systems. Strategies for using 2D as well as 3D structures, ordered macroporous materials such as inverse opals are summarized and recent work on plasmonic-photonic coupling in metal nanoparticle-infiltrated wide band gap inverse opals for enhanced photoelectrochemistry are provided.

3D bicontinuous SnO2/TiO2 core/shell structures for highly efficient organic dye-sensitized solar cell electrodes

SnO₂/TiO₂ core/shell hybrid structures with a 3D bicontinuous morphology were demonstrated as an electrode for dye-sensitized solar cells.