TiO2@Carbon Photocatalysts: The Effect of Carbon Thickness on Catalysis

Improved photocatalytic performance of TiO2/carbon photocatalysts: Role of carbon additive

A series of TiO2 - based photocatalysts have been prepared by the incorporation of 10 wt% of various carbon-based nanomaterials as modifying agents to titania. More specifically, commercial TiO2 P25 was modified through a wet impregnation approach with methanol with four different carbon nanostructures: single-walled carbon nanotubes (SWCNTs), partially reduced graphene oxide (prGO), graphite (GI), and graphitic carbon nitride (gCN). Characterization results (XPS and Raman) anticipate the occurrence of important interfacial phenomena, preferentially for samples TiO2/SWCNT and TiO2/prGO, with a binding energy displacement in the Ti 2p contribution of 1.35 eV and 1.54 eV, respectively. These findings could be associated with an improved electron-hole mobility at the carbon/oxide interface. Importantly, these two samples constitute the most promising photocatalysts for Rhodamine B (RhB) photodegradation, with nearly 100% conversion in less than 2 h. These promising results must be associated with intrinsic physicochemical changes at the formed heterojunction structure and the potential dual-role of the composites able to adsorb and degrade RhB simultaneously. Cyclability tests confirm the improved performance of the composites (e.g., TiO2/SWCNT, 100% degradation in 1 h) due to the combined adsorption/degradation ability, although the regeneration after several cycles is not complete due to partial blocking of the inner cavities in the carbon nanotubes by non-reacted RhB. Under these reaction conditions, Rhodamine-B xanthene dye degrades via the de-ethylation route.

Green synthesis of BiVO4/Eco-graphene nanostructures for the elimination of sulfamethoxazole by adsorption and photo-degradation using blue LED light

Photo-catalysts based on BiVO4 (BV) and Eco-graphene (EG) were synthesized and obtained in a single step with high-quality properties. These nanostructures (NEs) were obtained through a green chemistry route and by adding 2, 3, and 5 wt% of a homemade EG. The BV/X EG NEs (where X = corresponds to the weight % of EG) demonstrated high photocatalytic activity, obtaining Sulfamethoxazole degradation percentages of 40, 45, 52, and 57 for BV, BV/2 EG, BV/3 EG, and BV/5 EG respectively, using a blue LED light. In addition, it was observed that the presence of EG slightly affected the surface area and porosity of BV. Moreover, it was observed that the presence of EG stabilized the scheelite monoclinic phase (m-s), and decreased the crystal size and band-gap values of BV-based samples. It was detected that EG contents increased the BV reduction, creating oxygen vacancies and V4+ states, which favored electron transfer, enhanced the photo-catalytic activity, and decreased the recombination rate. The adsorption influence of the BV/EG system was also studied. Finally, the stability tests of these materials after four cycles of reuse allowed keeping practically the full degradation capacity, demonstrating that these NEs represent a promising material driven by visible light that can be used for wastewater decontamination in the presence of drugs.

Study on preparation of UV-CDs/Zeolite-4A/TiO2 composite photocatalyst coupled with ultraviolet-irradiation and their application of photocatalytic degradation of dyes

In this work, ultraviolet irradiation was employed to assist in the preparation of a novel photocatalyst composite in the form of carbon dots/zeolite-4A/TiO2, using coal tailings as the source of silicon-aluminum and carbon. The composite was designed for the degradation of methylene blue under 500 W of UV light irradiation. Zeolite-4A was used as a support for the well-dispersed carbon dots and TiO2 nanoparticles. The as-prepared composites were subjected to thorough characterization, confirming the successful formation of zeolite-4A with a cube structure, along with the loading of TiO2 and coal-based CDs in the composites. The experimental results demonstrated that the UV-CZTs nanocomposites exhibited a remarkable removal efficiency of 90.63% within 90 min for MB. The corresponding rate constant was exceptionally high at 0.0331 min-1, surpassing that of the Dark-CZTs and pure TiO2. This significant enhancement was possibly due to the synergistic effect of adsorption photocatalysis of the UV-CZTs, combined with the excellent electron-accepting capabilities of the coal-based CDs, which led to highly improved charge separation. An investigation of the spent photocatalyst's recyclability revealed that it retained a remarkable 82.94% MB removal efficiency after five consecutive cycles, signifying the stability of the composite. Trapping experiments also elucidated the primary reactive species responsible for MB degradation, which were identified as photo-generated holes and ⸱O2- species. By this process, the hydroxyl radicals generated in the system successfully promoted the transformation of coal tailings to coal-based zeolite and coal-based CDs. Coal-based zeolite served as an excellent carrier of titanium dioxide, which improved its dispersibility. The inhibition of e--h+ recombination of titanium dioxide by introducing coal-based CDs improved the photocatalytic ability of titanium dioxide. Through this study, coal tailings, as a coal processing waste, were transformed into high-value materials, and relevant photocatalytic composite materials could be prepared with broad application prospects.

In Operando Photoswitching of Cu Oxidation States in Cu-Based Plasmonic Heterogeneous Photocatalysis for Efficient H2 Evolution

Metal nanoparticles (NP) supported on TiO₂ are known to be efficient photocatalysts for solar-to-chemical energy conversion. While TiO₂ decorated with copper NPs has the potential to become an attractive system, the poor oxidative stability of Cu severely limits its applicability. In this work, we demonstrate that, when Cu NPs supported on TiO₂ nanobelts (NBs) are engaged in the photocatalytic generation of H₂ from water under light illumination, Cu is not only oxidized in CuO but also dissolved under the form of Cu⁺/Cu²⁺ ions, leading to a continuous reconstruction of nanoparticles via Ostwald ripening. By nanoencapsulating the CuO_x (Cu/CuO/Cu₂O) NPs by a few layers of carbon supported on TiO₂ (TC@C), Ostwald ripening can be suppressed. Simultaneously, the resulting CuO_x@C NPs are photoreduced under light illumination to generate Cu@C NPs. This photoswitching strategy allows the preparation of a Cu plasmonic photocatalyst with enhanced activity for H₂ production. Remarkably, the photocatalyst is even active when illuminated with visible light, indicating a clear plasmonic enhancement of photocatalytic activity from the surface plasmonic resonance (SPR) effect of Cu NPs. Three-dimensional electromagnetic wave-frequency domain (3D-EWFD) simulations were conducted to confirm the SPR enhancement. This advance bodes for the development of scalable multifunctional Cu-based plasmonic photocatalysts for solar energy transfer.

Synthesis, modification and application of titanium dioxide nanoparticles: a review

Titanium dioxide (TiO₂) has been heavily investigated owing to its low cost, benign nature and strong photocatalytic ability. Thus, TiO₂ has broad applications including photocatalysts, Li-ion batteries, solar cells, medical research and so on. However, the performance of TiO₂ is not satisfactory due to many factors such as the broad band gap (3.01 to 3.2 eV) and fast recombination of electron-hole pairs (10^-12 to 10^-11 s). Plenty of work has been undertaken to improve the properties, such as structural and dopant modifications, which broaden the applications of TiO₂. This review mainly discusses the aspects of TiO₂-modified nanoparticles including synthetic methods, modifications and applications.

Visible-Light-Driven Carbon-Doped TiO2-Based Nanocatalysts for Enhanced Activity toward Microbes and Removal of Dye

Solar-driven photocatalytic approach is an attractive, clean, and effective way for decontamination of water. In this work, visible-light-activated TiO₂ nanoflakes (TNFs) and carbon-doped TiO₂ nanoflakes (C-TNFs) were synthesized via a facile hydrothermal route using different carbon sources. The as-synthesized nanostructures were successfully characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM), critically disclosing the anatase nature containing titanium-oxygen having flake/platelet-like morphology with ∼32 nm in size, respectively. The photocatalytic activity was characterized via the degradation of methylene blue (MB) and bacterial inactivation of Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive). The experimental results showed that C-TNFs significantly enhanced photocatalytic activity compared to bare TNFs. It was found that TNF nanocatalysts exhibited superior photocatalytic activity against photodegradation of MB (92.7%) and antibacterial activity (85.6%) under sunlight irradiation. In addition, reduced graphene oxide (RGO)-TNFs have a good recycling ability and are expected to be a promising candidate for photocatalytic applications under sunlight. Consequentially, the higher activity of RGO-TNF nanocatalysts under sunlight irradiation for organic degradation and bacterial inactivation implies that hydrothermal synthesis allows for the preparation of efficient and low-cost carbon-doped photocatalysts for the photodegradation of a wide range of environmental pollutants.

Photocatalytic degradation of amoxicillin from aqueous solutions by titanium dioxide nanoparticles loaded on graphene oxide

The photocatalytic degradation of amoxicillin (AMX) by titanium dioxide nanoparticles loaded on graphene oxide (GO/TiO₂) was evaluated under UV light. Experimental results showed that key parameters such as initial pH, GO/TiO₂ dosage, UV intensity, and initial AMX concentration had a significant effect on AMX degradation. Compared to the photolysis and adsorption processes, the AMX degradation efficiency was obtained to be more than 99% at conditions including pH of 6, the GO/TiO₂ dosage of 0.4 g/L, the AMX concentration of 50 mg/L, and the intensity of 36 W. Trapping tests showed that all three hydroxyl radical (OH^•), superoxide radical (O₂^•-), and hole (h⁺) were produced in the photocatalytic process; however, h⁺ plays a major role in AMX degradation. Under UV irradiation, GO/TiO₂ showed excellent stability and recyclability for 4 consecutive reaction cycles. The analysis of total organic carbon (TOC) suggested that AMX could be well degraded into CO₂ and H₂O. The formation of NH₄⁺, NO₃^-, and SO₄^2- as a result of AMX degradation confirmed the good mineralization of AMX in the GO/TiO₂/UV process. The toxicity of the inlet and outlet samples of the process has been investigated by cultivation of Escherichia coli and Streptococcus faecalis, and the results showed that the condition is suitable for the growth of organisms. The photocatalytic degradation mechanism was proposed based on trapping and comparative tests. Based on the results, the GO/TiO₂/UV process can be considered as a promising technique for AMX degradation due to photocatalyst stability, high mineralization efficiency, and effluent low toxicity.

One-Dimensional CdS/Carbon/Au Plasmonic Nanoarray Photoanodes via In Situ Reduction-Graphitization Approach toward Efficient Solar Hydrogen Evolution

Photoelectrochemical (PEC) hydrogen evolution has been acknowledged as a promising "green" technique to convert solar energy into clean chemical fuel. Photoanodes play a key role in determining the performance of PEC systems, spurring numerous efforts to develop advanced materials as well as structures to improve the photoconversion efficiency. In this work, we report the rational design of a plasmonic hierarchical nanorod array, composed of oriented one-dimensional (1D) CdS nanorods decorated with a uniformly wrapped graphite-like carbon (C_PDA) layer and Au nanoparticles (Au NPs), as highly efficient photoanode materials. An interfacial in situ reduction-graphitization method has been conducted to prepare the CdS/C_PDA/Au nanoarchitecture, where polydopamine (PDA) coating was used as a C source and a reductant. The CdS/C_PDA/Au nanoarray photoanode demonstrates superior photoconversion efficiency with a photocurrent density of 8.74 mA/cm² and an IPCE value (480 nm) of 30.2% (at 1.23 V vs RHE), under simulated sunlight irradiation, which are 12.7 and 13.5 times higher than pristine CdS. The significant enhancement of PEC performance is mainly benefited from the increase of the entire quantum yield and efficiency due to the formation of a Schottky rectifier, localized surface plasmon resonance (LSPR)-enhanced light absorption, and promoted hot-electron injection from interlayered graphene-like carbon. More importantly, thanks to the inhibited charge carrier recombination process and transferred oxidation reaction sites, the fabricated CdS/C_PDA/Au photoelectrode exhibits lengthened electron lifetimes and better photostability, illustrating its wonderful potential for future PEC application.

Recent Advances in Synthesis and Applications of Carbon-Doped TiO2 Nanomaterials

TiO2 has been widely used as a photocatalyst and an electrode material toward the photodegradation of organic pollutants and electrochemical applications, respectively. However, the properties of TiO2 are not enough up to meet practical needs because of its intrinsic disadvantages such as a wide bandgap and low conductivity. Incorporation of carbon into the TiO2 lattice is a promising tool to overcome these limitations because carbon has metal-like conductivity, high separation efficiency of photogenerated electron/hole pairs, and strong visible-light absorption. This review would describe and discuss a variety of strategies to develop carbon-doped TiO2 with enhanced photoelectrochemical performances in environmental, energy, and catalytic fields. Emphasis is given to highlight current techniques and recent progress in C-doped TiO2-based materials. Meanwhile, how to tackle the challenges we are currently facing is also discussed. This understanding will allow the process to continue to evolve and provide facile and feasible techniques for the design and development of carbon-doped TiO2 materials.

Immobilizing Polysulfide by In Situ Topochemical Oxidation Derivative TiC@Carbon-Included TiO2 Core-Shell Sulfur Hosts for Advanced Lithium-Sulfur Batteries

The performance of lithium-sulfur (Li-S) batteries is greatly hindered by the notorious shuttle effect of lithium polysulfides (LiPSs). To address this issue, in situ topochemical oxidation derivative TiC@carbon-included TiO₂ (TiC@C-TiO₂ ) core-shell composite is designed and proposed as a multifunctional sulfur host, which integrates the merits of conductive TiC core to facilitate the redox reaction kinetics of sulfur species, and porous C-TiO₂ shell to suppress the dissolution and shuttling of LiPSs through chemisorption. A unique dual chemical mediation mechanism is demonstrated for the proposed TiC@C-TiO₂ composite that synergistically entraps LiPSs through thiosulfate/polythionate conversion coupled with strong polar-polar interaction. The morphological characterization reveals that the TiC@C-TiO₂ -based cathode can well regulate the distribution of electrode materials to retard their accumulation inside the electrode, ensuring effective contact between the active materials and electrolyte. Based on its unique function and structure, the cathode delivers an improved capacity of 1256 mAh g^-1 at 0.2C, a remarkable rate capability of 643 mAh g^-1 , and an ultralow capacity decay rate of 0.065% per cycle at 2C over 900 cycles. This work not only demonstrates a dual chemical mediation mechanism to immobilize LiPSs, but also provides a universal strategy to construct multifunctional sulfur hosts for advanced Li-S batteries.

Synthesis of Superior Visible-Light-Driven Nanophotocatalyst Using High Surface Area TiO2 Nanoparticles Decorated with CuxO Particles

This work provides an alternate unique simple methodology to design and synthesize chemically modified nanophotocatalyst based on high surface area TiO2 nanoparticles that can be used efficiently for the photodegradation of organic pollutants under normal visible light rather than complicated UV irradiation. In this study, dual visible light and UV-driven nanophotocatalysts were synthesized via wet chemistry procedures using high surface area TiO2 nanoparticles functionalized with (3-Aminopropyl) trimethoxysilane and attached chemically to the CuXO to improve the charge separation and maintain the non-charge recombination. The successful modification of the TiO2 nanoparticles and the formation of the TiO2-NH2-CuxO nanophotocatalyst were confirmed using different characterization techniques, and the results revealed the synthesis of high surface area TiO2 nanoparticles, and their chemical modification with an amino group and further decoration with copper to produce TiO2-NH2-CuxO nanophotocatalyst. The photocatalytic activity of TiO2 and TiO2-NH2-CuxO nanophotocatalyst were evaluated using methylene blue (MB) dye; as an example of organic pollutants. The resulting TiO2-NH2-CuxO nanophotocatalyst exhibited superior photocatalytic activity for the degradation of MB dye under visible light irradiation, due to the reduction in the energy bandgap. The degradation of the MB dye using the TiO2-NH2-CuxO nanophotocatalyst was investigated using LC-MS, and the results revealed that the hydroxyl free radical is mainly responsible for the cleavage and the degradation of the MB dye.

Ultrasensitive Photoelectrochemical Detection of MicroRNA on Paper by Combining a Cascade Nanozyme-Engineered Biocatalytic Precipitation Reaction and Target-Triggerable DNA Motor

Developing efficient strategies for sensitive detection of microRNAs, the noncoding bioactive molecules and well-established biomarkers, has aroused great interests due to its great potential values in genetic and pathological analyses. Herein, a highly selective and disposable paper-based photoelectrochemical (PEC) sensor was rationally designed for sensing microRNA based on simple self-assembly of a target-triggerable DNA motor and nanozyme-catalyzed multistage biocatalytic precipitation reaction. Specifically, a brand-new type II heterojunction of TiO₂-CeO₂ nanotubes decorated with carbon fiber paper (CFP) was first prepared, which gave an enhanced photoreactive surface and realized fast electron transport and extraction, markedly accelerating photoelectric conversion efficiency of the sensor. For achieving target detection, cascade nanozyme centers of the CeO₂ and Au nanoparticles modified by cyclodextrin were drafted, greatly decreasing the photocurrent intensity and achieving an ultralow background signal. With target introduction, the DNA motor was activated and automatically moved along the predesigned route driven by an endonuclease cleavage reaction, resulting in more substrate probe digestion and nanozyme release from CFP. Consequently, the repressive inner enhancement mechanism was gradually renewed with constant advancement of the enzymatic reaction and walker probe walking progressively, eventually allowing multiple enzymatic factor output in each target import. As a proof-of-concept application, the developed PEC sensor successfully performed detection of miRNA-141, showing a low detection limit of 0.6 fM, and was further applied to real sample bioassays with satisfying results. This work proposes promising strategies to boost the catalytic cascade DNA-motor adhibition in biological samples analysis and also exhibits potential capability in detection of other targets.

Nanocomposite Titania-Carbon Spheres as CO2 and CH4 Sorbents

Photocatalysis can offer solutions for the transformation of greenhouse gases, such as methane and carbon dioxide. In the paper, a candidate for such a photocatalyst is presented, based on a composite of titania with carbon spheres. The material was obtained using microwave assisted solvothermal synthesis, enabling good dispersion of titania. The studies of carbon dioxide and methane adsorption were performed under ambient pressure and temperatures of 40, 60, and 80 °C. The effect of temperature increase was less favorable for carbon dioxide than for methane. Satisfying values of carbon dioxide and methane uptake were obtained-3.94 mmol CO₂/g and 2.77 mmol CH₄/g at 40 °C.

TiO2@C core@shell nanocomposites: A single precursor synthesis of photocatalyst for efficient solar water treatment

This study reports the facile synthesis of highly photoactive TiO₂@C core@shell nanocomposites through a single alkoxide precursor. TiO₂ and carbon-based hybrid nanomaterials are popular photocatalysts owing to their abundance, low toxicity, and high stability, making them strong candidates for practical solar water-treatment applications. However, synthesis of such nanomaterials is often a multi-step process and requires careful control of the external carbon source for producing the desired morphology. In this regard, this study reports the synthesis of well-dispersed TiO₂@C nanocomposites without the need of an external carbon source. The resulting photocatalyst was employed for treatment of various water-borne pollutants including several dyes, pharmaceuticals, and pathogens. Rapid mineralization of pollutants could be achieved even with low amounts of catalyst, with the performance well exceeding that of pristine TiO₂ and P25 Degussa. Results indicate that incorporation of C increases visible-light absorption and greatly improves the separation of photogenerated charge carriers. Given the facile synthesis and the wide scope of operation, the proposed catalyst could be a significant step towards practical photocatalytic solar water-treatment.

Recent advances in MOF-based photocatalysis: environmental remediation under visible light

Highly photoactive MOFs can be engineered via various strategies for the purpose of extended visible light absorption, more efficient generation, separation and transfer of charge carriers, as well as good recyclability.

Facile Fabrication of C-TiO2 Nanocomposites with Enhanced Photocatalytic Activity for Degradation of Tetracycline

Visible-lightdriven C-TiO₂ nanocomposites were prepared via a simple calcination and acid etching process. The C-TiO₂ nanocomposites were characterized by X-ray photoelectron spectroscopy, Raman spectroscopy, X-ray diffraction, transmission electron microscopy, and high-resolution TEM. The results showed that TiO₂ nanoparticles were combined with a porous carbon layer through surface C-O groups, which facilitates the strong interface interaction. The interface combination of nano-TiO₂ and carbon material increases the specific surface area of nano-TiO₂, widens the range of light response, and improves the efficiency of light-induced electron migration. The visible-light photocatalytic activity of the prepared photocatalyst was evaluated by the decomposition of tetracycline aqueous solution. Compared with that of pure TiO₂, the photocatalytic activity of C-TiO₂ nanocomposites was significantly improved. Furthermore, a possible photocatalytic mechanism was also tentatively proposed. This work can promote the development of active photocatalysts under solar light for the photodegradation of environmental pollutants.

Formation of TiO2@Carbon Core/Shell Nanocomposites from a Single Molecular Layer of Aromatic Compounds for Photocatalytic Hydrogen Peroxide Generation

In this article, we demonstrate that TiO₂@carbon core/shell (TiO₂@C) nanocomposite photocatalysts prepared by carbonizing a single molecular layer of aromatic compounds adsorbed on the surface of TiO₂ nanoparticles selectively enhance the generation of hydrogen peroxide (H₂O₂). Atomically thin carbon shells have been formed directly on the surface of TiO₂ nanoparticles through pyrolytic decarboxylation of the adsorbed aromatic compounds, benzoic acid (BA), and 1-naphthoic acid (NA), which yields two types of TiO₂@C nanocomposites, TiO₂@C(BA) and TiO₂@C(NA). Raman spectroscopy shows that the as-obtained nanocomposites have similar degrees of graphitization (D/G band ratio), regardless of the type of aromatic precursors, but TiO₂@C(NA) contains more oxygenic species than TiO₂@C(BA) (D*/G band ratio). Such oxygenic species predominantly exist in the form of epoxide groups, as determined by attenuated total reflection infrared spectroscopy. The sp² carbon atoms near the epoxide groups in the carbon shell can act as active sites for the two-electron reduction of O₂. Therefore, TiO₂@C(NA) can generate H₂O₂ more efficiently than TiO₂@C(BA). Furthermore, the carbon shells retard the reconsumption of the generated H₂O₂ by inhibiting the adsorption of H₂O₂ on the surface of TiO₂ nanoparticles, thereby improving the photocatalytic efficiency of H₂O₂ generation. Finally, we have shown the durability and reproducibility of our TiO₂@C-based photocatalytic systems. We believe that our research may offer a potentially improved strategy for H₂O₂ generation and other photocatalytic applications.

Efficient photoelectrochemical water-splitting over carbon membrane linked Au and TiO2 nanotube arrays film based on multiple carriers transport paths

Herein, a carbon membrane and Au nanoparticles were combined to improve the efficiency of photoelectrocatalytic water splitting over a TiO₂ nanotube arrays film (TiO₂ NTAF). Two different ternary nanostructures were constructed by hydrothermal and photochemical deposition processes. One was carbon membrane bridged Au nanoparticles and TiO₂ nanotube arrays (Au/C/TiO₂ NTAF), while the other was Au nanoparticles sandwiched between carbon membrane and TiO₂ nanotube arrays (C/Au/TiO₂ NTAF). The two structures exhibited enhanced visible light harvesting ability, but they showed distinctly different photoelectric properties. The unique microstructure of C/Au/TiO₂ NTAF resulted in a much higher reduction of the electron cloud density of Au nanoparticles as carrier recombination centers, which were responsible for its poor photoelectrochemical performance. However, a champion photocurrent of Au/C/TiO₂ NTAF was observed (0.984 mA cm^-2), indicating superior ability of the photoelectrocatalytic water splitting. The great enhancement was attributed to multiple carriers transport paths, which can efficiently utilize the sensitization of the carbon membrane and the surface plasmon resonance effect of the Au nanoparticles.

The enhanced photocatalytic properties of MnO2/g-C3N4 heterostructure for rapid sterilization under visible light

Herein, a heterostructure based on MnO₂ and g-C₃N₄ was constructed on the surface of metallic Ti implants, in which MnO₂ favored the transfer and separation of free charges to enhance the photoconversion efficiency of g-C₃N₄ by 21.11%. Consequently, the yield of ROS was promoted significantly, which denatured protein and damaged DNA to kill bacteria efficiently. In addition, glutathione (GSH, l-γ-glutamyl-l-cysteinyl-glycine) defending oxidative stress in bacteria, was oxidized by MnO₂ in the hybrid coating once the bacterial membrane was disrupted by ROS. Hence, after visible light irradiation for 20 min, MnO₂/g-C₃N₄ coating exhibited superior disinfection efficacy of 99.96% and 99.26% against S. aureus and E. coli severally. This work provided a practical sterilization strategy about MnO₂/g-C₃N₄ systems through the synergistic effects of enhanced photodynamic antibacterial therapy and oxidization effect of MnO₂ with great biosafety, in which MnO₂ enhanced the photocatalyst property of g-C₃N₄ to generate more ROS and deplete GSH to improve antibacterial efficiency. It will bring more insight into rapid and highly effective disinfection and antibacterial strategy without using traditional high-temperature, ultraviolet ray and antibiotics that cause side-effects.

Polymeric graphitic carbon nitride (g-C3N4)-based semiconducting nanostructured materials: Synthesis methods, properties and photocatalytic applications

In recent years, various facile and low-cost methods have been developed for the synthesis of advanced nanostructured photocatalytic materials. These catalysts are required to mitigate the energy crisis, environmental deterioration, including water and air pollution. Among the various semiconductors explored, recently novel classes of polymeric graphitic carbon nitride (g-C₃N₄)-based heterogeneous photocatalysts have established much greater importance because of their unique physiochemical properties, large surface area, low price, and long service life, ease of synthesis, product scalability, controllable band gap properties, low toxicity, and high photocatalytic activity. The present comprehensive review focuses on recent achievements in a number of facile chemical synthesis methods for semiconducting polymeric carbon nitrides and their heterogeneous nanohybrids with various dopants, nanostructured metals, metal oxides, and nanocarbons, as well as the parameters influencing their physiochemical properties and photocatalytic efficiency, which are discussed with reference to various catalytic applications such as air (NO_x) purification, wastewater treatment, hydrogen generation, CO₂ reduction, and chemical transformation. The mechanisms for the superior photocatalytic activity of polymeric g-C₃N₄-based heterogeneous photocatalysts are also discussed. Finally, the challenges, prospects, and future directions for photocatalytic polymeric g-C₃N₄-based semiconducting materials are described.

Interfacially bonded CuCo2O4/TiO2 nanosheet heterostructures for boosting photocatalytic H2 production

The CuCo₂O₄/TiO₂ nanosheets adopting interfacial chemical bonding exhibit outstanding photocatalytic activity toward water splitting.

Hierarchically-structured SiO2-Ag@TiO2 hollow spheres with excellent photocatalytic activity and recyclability

A new protocol for constructing sandwich-like SiO₂-Ag@TiO₂ hollow spheres (SAT) is introduced, in which SiO₂ acts as an efficient support for the Ag nanoparticles (Ag NPs) immobilization, while TiO₂ maintains its hierarchical structure and prevents the aggregation of Ag NPs during the photocatalytic reaction. As a photocatalytic agent, the inner and outer surfaces of TiO₂ can be fully occupied by pollutants molecules because of its unique structure, which faster boosts the photo-generated electrons to transfer the substrates, leading to an enhanced photocatalytic performance. Compared with Ag NPs deposited on the surface of SiO₂@TiO₂ (STA), the as-synthesized SAT exhibits a markedly enhanced visible-light and UV light activity than STA for degrading tetracycline and traditional dyes. The excellent photocatalytic performances are ascribed to the enhanced transport paths of photo-generated electrons, reduced recombination probability of e^-/h⁺ pairs, and decreased threat of oxidation and corrosion. Especially, the SAT still maintains its photocatalytic efficiency after five consecutive runs even though the sample is recovered under visible-light irradiation, far beyond the reusability of STA under the same conditions. Therefore, the outstanding photocatalytic activity and excellent recyclability make SAT more potential to purify aquatic contaminants and to meet the demands of future environmental issues.

Editable TiO2 Nanomaterial-Modified Paper in Situ for Highly Efficient Detection of Carcinoembryonic Antigen by Photoelectrochemical Method

In this work, a versatile photoelectrochemical paper-based sensor based on N-carbon dots/TiO₂-Pt-modified paper in situ is developed for sensitive detection of carcinoembryonic antigen (CEA) in clinical serum samples. Interconnected cellulose fibers on paper provide a porous, 3D, and flexible substrate for photoelectrochemical sensing. In situ modification of N-carbon dots/TiO₂-Pt with editable structures on paper significantly increases the conductivity, widens the adsorption range, and enhances the photoelectrochemical ability, which enables the higher sensitivity and flexibility compared with traditional rigid sensors. On the basis of this novel protocol, a miniaturized and portable origami device realizes the CEA determination with a low detection limit of 1.0 pg mL^-1 and a wide linear range from 0.002 to 200 ng mL^-1. Thanks to the good biocompatibility, the paper-based device provides a new avenue for the detection of CEA on the cell surface which is promising for portable diagnostics in early tumor warning.

Enhanced Visible-Light-Driven Photocatalytic Bacterial Inactivation by Ultrathin Carbon-Coated Magnetic Cobalt Ferrite Nanoparticles

Ultrathin hydrothermal carbonation carbon (HTCC)-coated cobalt ferrite (CoFe₂O₄) composites with HTCC coating thicknesses between 0.62 and 4.38 nm were fabricated as novel, efficient, and magnetically recyclable photocatalysts via a facile, green approach. The CoFe₂O₄/HTCC composites showed high magnetization and low coercivity, which favored magnetic separation for reuse. The results show that the close coating of HTCC on CoFe₂O₄ nanoparticles enhanced electron transfer and charge separation, leading to a significant improvement in photocatalytic efficiency. The composites exhibited superior photocatalytic inactivation toward Escherichia coli K-12 under visible-light irradiation, with the complete inactivation of 7 log₁₀ cfu·mL^-1 of bacterial cells within 60 min. The destruction of bacterial cell membranes was monitored by field-effect scanning electron microscopy analysis and fluorescence microscopic images. The bacterial inactivation mechanism was investigated in a scavenger study, and ^•O₂, H₂O₂, and h⁺ were identified as the major reactive species for bacterial inactivation. Multiple cycle runs revealed that these composites had excellent stability and reusability. In addition, the composites showed good photocatalytic bacterial inactivation performance in authentic water matrices such as surface water samples and secondarily treated sewage effluents. The results of this work indicate that CoFe₂O₄/HTCC composites have great potential in large-scale photocatalytic disinfection operations.

One-Step Synthesis of Nb2 O5 /C/Nb2 C (MXene) Composites and Their Use as Photocatalysts for Hydrogen Evolution

Hydrogen production through facile photocatalytic water splitting is regarded as a promising strategy to solve global energy problems. Transition-metal carbides (MXenes) have recently drawn attention as potential co-catalyst candidates for photocatalysts. Here, we report niobium pentoxide/carbon/niobium carbide (MXene) hybrid materials (Nb₂ O₅ /C/Nb₂ C) as photocatalysts for hydrogen evolution from water splitting. The Nb₂ O₅ /C/Nb₂ C composites were synthesized by one-step CO₂ oxidation of Nb₂ CT_x . Nb₂ O₅ grew homogeneously on Nb₂ C after mild oxidation, during which some amorphous carbon was also formed. With an optimized oxidation time of 1.0 h, Nb₂ O₅ /C/Nb₂ C showed the highest hydrogen generation rate (7.81 μmol h^-1  g_cat^-1 ), a value that was four times higher than that of pure Nb₂ O₅ . The enhanced performance of Nb₂ O₅ /C/Nb₂ C was attributed to intimate contact between Nb₂ O₅ and conductive Nb₂ C and the separation of photogenerated charge carriers at the Nb₂ O₅ /Nb₂ C interface; the results presented herein show that transition-metal carbide are promising co-catalysts for photocatalytic hydrogen production.

Low temperature fabrication of Fe2O3 nanorod film coated with ultra-thin g-C3N4 for a direct z-scheme exerting photocatalytic activities

We engineered high aspect ratio Fe₂O₃ nanorods (with an aspect ratio of 17 : 1) coated with g-C₃N₄ using a sequential solvothermal method at very low temperature followed by a thermal evaporation method. Here, the high aspect ratio Fe₂O₃ nanorods were directly grown onto the FTO substrate under relatively low pressure conditions. The g-C₃N₄ was coated onto a uniform Fe₂O₃ nanorod film as the heterostructure, exhibiting rational band conduction and a valence band that engaged in surface photoredox reactions by a direct z-scheme mechanism. The heterostructures, particularly 0.75g-C₃N₄@Fe₂O₃ nanorods, exhibited outstanding photocatalytic activities compared to those of bare Fe₂O₃ nanorods. In terms of 4-nitrophenol degradation, 0.75g-C₃N₄@Fe₂O₃ nanorods degraded all of the organic pollutant within 6 h under visible irradiation at a kinetic constant of 12.71 × 10⁻³ min⁻¹, about 15-fold more rapidly than bare Fe₂O₃. Further, the hydrogen evolution rate was 37.06 μmol h⁻¹ g⁻¹, 39-fold higher than that of bare Fe₂O₃. We suggest that electron and hole pairs are efficiently separated in g-C₃N₄@Fe₂O₃ nanorods, thus accelerating surface photoreaction via a direct z-scheme under visible illumination.

The engineered high aspect ratio of Fe₂O₃ nanorods coated with g-C₃N₄ demonstrates z-scheme mechanism, showing the best performance in 4-nitrophenol photodegradation and H₂ evolution.

Quantum confinement induced ultra-high intensity interfacial radiative recombination in nanolaminates

Al₂O₃/ZnO, Al₂O₃/TiO₂, TiO₂/ZnO and MgO/ZnO nanolaminates (NLs) were prepared using atomic layer deposition to explore the dependence of luminescence characterization on the sublayer width and constituents. When the ZnO sublayer width is larger than the Bohr radius in Al₂O₃/ZnO NLs, the UV luminescence arising from ZnO is reduced and even quenched with decreasing the ZnO width due to the nonradiative recombination (NR) caused by the existence of interface states, while for the ZnO width smaller than the Bohr radius, a visible luminescence rather than UV emission is observed and further enhanced with decreasing the ZnO width. It is also found that the visible luminescence needs a certain width of Al₂O₃ and is extinguished by the replacement of Al₂O₃ with TiO₂. A theoretical model based on the configuration coordination and quantum confinement effect is proposed to understand the physical origin underlying the intriguing optical behaviour. The mechanism has generality and is applicable for other NLs as well, such as Al₂O₃/TiO₂ and MgO/ZnO NLs with ultra-thin sublayers in which similar luminescence enhancements are also observed. This work may provide a promising approach for realizing high performance luminescence with various wavelengths for electro- and photo-luminescence applications in NLs.

Efficient Upconverting Multiferroic Core@Shell Photocatalysts: Visible-to-Near-Infrared Photon Harvesting

We report the two-step synthesis of a core@shell nanohybrid material for visible-to-near-infrared (NIR) photocatalysis. The core is constituted of NaGdF₄:Er³⁺, Yb³⁺ upconverting nanoparticles (UCNPs). A bismuth ferrite (BFO) shell is assembled around the UCNPs via a hydrothermal process. The photocatalytic degradation assays of methylene orange and 4-chlorophenol reveal that these core@shell nanostructures possess remarkably enhanced reaction activity under visible and NIR irradiation, compared to the BFO powder alone and the BFO-UCNP mixture. Photo-charge scavenger tests and fluorescent assays indicate that hydroxyl radicals play a pivotal role in the photodegradation mechanism. The enhanced photoactivity of the core@shell structure is attributed to the NIR radiation which is converted into visible light by UCNPs, and which is then captured by BFO via a nonradiative luminescence resonance energy transfer process. Therefore, this core@shell architecture optimizes solar energy use by efficiently harvesting visible and NIR photons.

CNTs-Modified Nb3O7F Hybrid Nanocrystal towards Faster Carrier Migration, Lower Bandgap and Higher Photocatalytic Activity

Novel semiconductor photocatalysts have been the research focus and received much attention in recent years. The key issues for novel semiconductor photocatalysts are to effectively harvest solar energy and enhance the separation efficiency of the electron-hole pairs. In this work, novel Nb₃O₇F/CNTs hybrid nanocomposites with enhanced photocatalytic activity have been successfully synthesized by a facile hydrothermal plus etching technique. The important finding is that appropriate pH values lead to the formation of Nb₃O₇F nanocrystal directly. A general strategy to introdue interaction between Nb₃O₇F and CNTs markedly enhances the photocatalytic activity of Nb₃O₇F. Comparatively, Nb₃O₇F/CNTs nanocomposites exhibit higher photodegradation efficiency and faster photodegradation rate in the solution of methylene blue (MB) under visible-light irradiation. The higher photocatalytic activity may be attributed to more exposed active sites, higher carrier migration and narrower bandgap because of good synergistic effect. The results here may inspire more engineering, new design and facile fabrication of novel photocatalysts with highly photocatalytic activity.

Diethylenetriamine-assisted in situ synthesis of TiO2 nanoparticles on carbon nanotubes with well-defined structure and enhanced photocatalytic performance

In solvothermal conditions, DETA will work as a connecting bridge to in situ form TiO₂/CNT composites with a well-defined structure and enhanced photocatalytic performance.

Polydopamine nanotubes-templated synthesis of TiO2 and its photocatalytic performance under visible light

As templates for generation of TiO₂ photocatalysts, polydopamine nanotubes can provide codopants (carbon and nitrogen) and graphene-like carbon coverings simultaneously.