A Highly Sensitive Immunosorbent Assay Based on Biotinylated Graphene Oxide and the Quartz Crystal Microbalance

Photoelectrochemical sensor based on AuNPs@WO3@TpPa-1-COF for quantification of DNA methylation levels

A "signal-off" photoelectrochemical (PEC) sensing platform has been designed for the ultrasensitive detection of DNA methylation levels and multiple methylated sites. The platform employs tungsten trioxide and TpPa-1-COF loaded by gold nanoparticle (AuNPs@WO3@TpPa-1-COF) composite material as the photoactive component and p-type reduced graphene (rGO) as an efficient quencher. The PEC signal of AuNPs@WO3@TpPa-1-COF composite is effectively quenched in the presence of p-type rGO, because p-type rGO can compete with AuNPs@WO3@TpPa-1-COF to deplete light energy and electron donors. In addition, a hybrid strand reaction (HCR) amplification strategy fixes more target DNA and then combines with rGO-modified anti-5-methylcytosine antibody to facilitate ultrasensitive DNA methylation detection. Under optimal conditions, DNA methylation can be measured within a linear concentration range of 10-14 to 10-8 M, with an exceptionally low detection limit of 0.19 fM (S/N = 3). At the same time, the platform can conduct quantitative determination of multi-site methylation, with the linear equation △I = 44.19LogA + 61.43, and the maximum number of methylation sites is 5. The sensor demonstrates high sensitivity, excellent selectivity, and satisfactory stability. Furthermore, the proposed signal-off PEC strategy was successfully employed to detect DNA methylation in spiked human serum samples, with recoveries ranging from 93.17 to 107.28% and relative standard deviation (RSD) ranging from 1.15 to 5.49%.

Synthesis of a novel carboxybetaine copolymer with different spacer lengths and inhibition of nonspecific protein adsorption on its polymer film

Herein, we designed and synthesized a thermally stable carboxybetaine copolymer with a one- or three-carbon spacer between ammonium and carboxylate groups (CBMA1 and CBMA3) to create an anti-nonspecific adsorption surface with the ability to immobilize antibodies. A series of controlled poly(N,N-dimethylaminoethyl methacrylate) was successfully prepared using reversible addition-fragmentation chain-transfer (RAFT) polymerization and was derived to carboxybetaine copolymers of poly(CBMA1-co-CBMA3) [P(CBMA1/CBMA3)] with various CBMA1 contents, including the homopolymers of CBMA1 and CBMA3. Thermal stability of the carboxybetaine (co)polymers was higher than that of the carboxybetaine polymer with a two-carbon spacer (PCBMA2). Further, we also evaluated nonspecific protein adsorption in fetal bovine serum and antibody immobilization on the substrate coated with P(CBMA1/CBMA3) copolymers using surface plasmon resonance (SPR) analysis. As the CBMA1 content increased, nonspecific protein adsorption on the P(CBMA1/CBMA3) copolymer surface decreased. Similarly, the immobilization amount of the antibody decreased as the CBMA1 content increased. However, the figure of merit (FOM), defined as the ratio of the amount of antibody immobilization to that of nonspecific protein adsorption, depended on the CBMA3 content; FOM was higher when the CBMA3 content was 20-40% than those of CBMA1 and CBMA3 homopolymers. These findings will help enhance the sensitivity of the analysis using molecular interaction measurement devices, such as SPR and quartz crystal microbalance.

Au@bovine serum albumin nanoparticle-based acid-resistant nanozyme quartz crystal microbalance sensing of urine glucose

A robust, efficient and sensitive quartz crystal microbalance (QCM) for glucose detection has been constructed using Au@bovine serum albumin (Au@BSA) nanoparticles as an active layer. The nanoparticles serve as tandem nanozymes and their stability over natural enzymes enable the sensor to show a wider linear dynamic range between 0.05 and 15 mM, a higher acid-resistance (pH 2.0-8.0) and heat-resistance (35-60 °C) than conventional glucose oxidase (GOx)-based sensors. The sensor has been further applied to measure glucose content in artificial urine directly without dilution, where the recovery of 99.6-105.2% and the relative standard deviations (RSDs) below 0.88% confirm a good reproducibility for the measurement results. In addition, the developed Au@BSA QCM sensor can retain 95% of its initial activity after 40 days of storage. Overall, the Au@BSA sensor shows better comprehensive performance than the commercial sensor strips for urine glucose analysis and provides a promising approach in a more precise and robust manner.

Bifunctional Magnetic Fe3O4@Cu2O@TiO2 Nanosphere-Mediated Dual-Mode Assay of PTP1B Activity Based on Photocurrent Polarity Switching and Nanozyme-Engineered Biocatalytic Precipitation Strategies

Dysregulation of protein phosphatases is associated with the progression of various human diseases and cancers. Herein, a photoelectrochemical (PEC)-quartz crystal microbalance (QCM) dual-mode sensing platform was developed for protein tyrosine phosphatase 1B (PTP1B) activity assay based on bifunctional magnetic Fe₃O₄@Cu₂O@TiO₂ nanosphere-mediated PEC photocurrent polarity switching and QCM signal amplification strategies. The PTP1B-specific phosphopeptide (P-peptide) with a cysteine end was designed and immobilized onto the QCM Au chip via the Au-S bond. Subsequently, the Fe₃O₄@Cu₂O@TiO₂ nanosphere was connected to the P-peptide via the specific interaction between the phosphate group on the P-peptide and TiO₂. After incubation with PTP1B, the dephosphorylation of the P-peptide occurred, causing some Fe₃O₄@Cu₂O@TiO₂ nanospheres to be released from the chip surface. The released magnetic Fe₃O₄@Cu₂O@TiO₂ nanospheres (labeled as R-Fe₃O₄@Cu₂O@TiO₂) were quickly separated via magnetic separation technology and attached to the Bi₂S₃-decorated magnetic indium-tin oxide (Bi₂S₃/MITO) electrode by magnetic force, inducing the switch of the photocurrent polarity of the electrode from anodic current (the Bi₂S₃/MITO electrode) to cathodic current (the R-Fe₃O₄@Cu₂O@TiO₂/Bi₂S₃/MITO electrode). Also, the nondephosphorylated P-peptide linked Fe₃O₄@Cu₂O@TiO₂ nanospheres as nanozymes with horseradish peroxidase activity to catalyze the formation of precipitation on the surface of the Au chip, leading to a frequency change of the QCM. Thus, the proposed PEC-QCM dual-mode sensing platform achieved accurate and reliable assay of PTP1B activity because of the different mechanisms and independent signal transductions. In addition, this dual-mode sensing platform can be easily extended for other protein phosphatase activity analysis and shows great potential in the early diagnosis of the protein phosphatase-related diseases and the protein phosphatase-targeted drug discovery.

Recent applications of QCM-D for the design, synthesis, and characterization of bioactive materials

The clinical translation of bioactive technologies is lacking compared to the number of novel technologies reported in the literature. This is in part due to the difficulties in characterizing bioactive materials to understand and predict their biological response. To progress the field and increase clinical success, more robust analytical techniques must be utilized when investigating novel bioactive materials. The quartz crystal microbalance with dissipation (QCM-D), a label-free sensing instrument based on an acoustic resonator, is used to quantify mass change and viscoelastic parameters from soft materials at the nanoscale, in situ, with precise temporal resolution and operation in both liquid and gaseous environments. The versatility of QCM-D has enhanced the characterization of bioactive polymers and sensing arrays for advanced applications of novel biotechnologies. In this review, we highlight exciting, recent applications of QCM-D for the investigation of bioactive materials. Attention is given to the dynamic mechanical properties of bioactive materials, discerning protein structure on surfaces, probing cell adhesion and cytoskeletal changes, and biosensing applications. We conclude that QCM-D has untapped utility in the pre-clinical investigation of bioactive materials and further utilization can improve the clinical success of novel technologies.

Endothelial Cell-Mediated Gene Delivery for In Situ Accelerated Endothelialization of a Vascular Graft

As an urgently needed device for vascular diseases, the small-diameter vascular graft is limited by high thrombogenicity in clinical applications. Rapid endothelialization is a promising approach to construct an antithrombogenic inner surface of the vascular graft. The main bottleneck for rapid endothelialization is the adhesion, migration, and proliferation of endothelial cells (ECs) in situ of the small-diameter vascular graft. Herein, we innovatively fabricated an intelligent gene delivery small-caliber vascular graft based on electrospun poly(lactic acid-co-caprolactone) and gelatin for rapid in situ endothelialization. The graft surface was co-modified with EC adhesive peptide of Arg-Glu-Asp-Val (REDV) and responsive gene delivery system. REDV can selectively adhere ECs onto the graft surface; subsequently, the overexpressed matrix metalloproteinase by ECs can effectively cleave the linker peptide GPQGIWGQ-C; and finally, the gene complexes were intelligently and enzymatically released from the graft surface, and thereby, the gene can efficiently transfect ECs. Importantly, this enzymatically releasing gene surface has been proven to be safe and temporarily stable in blood flow owing to the biotin-avidin interaction to immobilize gene complexes on the inner surface of vascular grafts through the GPQGIWGQ-C peptide linker. It has the advantage of specifically adhering the ECs to the surface and smartly transfecting them with high transfection efficiency. The co-modified surface has been demonstrated to accelerate the luminal endothelialization in vivo, which might be attributed to the synergistic effect of REDV and effective gene transfection. Particularly, the intelligent and responsive gene release surface will open a new avenue to enhance the endothelialization of blood-contacting devices.

Development of an open-source thermally stabilized quartz crystal microbalance instrument for biomolecule-substrate binding assays on gold and graphene

The interaction of biomolecules, such as proteins, with biomaterial surfaces is key to disease diagnostic and therapeutic development applications. There is a significant need for rapid, low-cost, field-serviceable instruments to monitor such interactions, where open-source tools can help to improve the accessibility to disease screening instruments especially in low- and middle-income countries. We have developed and evaluated a low-cost integrated quartz crystal microbalance (QCM) instrument for biomolecular analysis based on an open-source QCM device. The custom QCM instrument was equipped with a custom-made electronically controlled isothermal chamber with a closed-loop control routine. A thermal coefficient of 5.6 ppm/°C was obtained from a series of evaluations of the implemented control. Additionally, a custom-designed data acquisition system and a mathematical processing and analysis tool is implemented. The quartz crystal detection chips used here incorporate gold and reduced graphene oxide (rGO) coated surfaces. We demonstrate the system capability to monitor and record the biomolecular interaction between a typical protein bovine serum albumin (BSA) and these two substrates. This instrument was compared to a commercial QCM, demonstrating good correspondence between the computed mass adsorption density responses using the Sauerbrey model. For both Au and rGO surfaces, the custom QCM significantly outperforms the commercial system in limit of detection, sensitivity and linear range. The instrument presented here has the potential to serve as a ubiquitous bioelectronic tool for point-of-care disease screening and rapid therapeutics development.

A Portable, Label-Free, Reproducible Quartz Crystal Microbalance Immunochip for the Detection of Zearalenone in Food Samples

This research reports a portable immunochip, based on quartz crystal microbalance (QCM) for label-free, low-cost qualitative detection of zearalenone (ZEN) in food samples. The experimental parameters in the functionalization and working process were evaluated in detail, in order to achieve a high accuracy and sensitivity. Under optimal conditions, the ZEN concentration at an inhibition ratio of 50% and 15% of the proposed QCM immunochip achieved 3.41 µg L⁻¹ and 0.37 µg L⁻¹, respectively. This portable QCM immunochip also exhibited high specificity, no obvious cross-reaction to five structural analogs of ZEN, and showed other mycotoxins. It could finish the whole qualitative measurement within 30 min, showed good stability during the processes of preparation (SD < 5%, n = 9), storage (frequency response >90%, in PBS at 4 °C for 15 days), and application (frequency response >90% after being reused 6 times). The developed QCM immunochip obtained accurate and repeatable recovery results in ZEN analysis in the chosen food samples (corn, wheat flour, soy sauce, and milk), which had a high correlation (R² = 0.9844) with that achieved by the HPLC–MS/MS method. In short, this work developed a portable, stable, and reproducible QCM immunochip that could be used for rapid, low-cost, and sensitively measurement of ZEN content in real food samples.

Copper (0) Mediated Single Electron Transfer-Living Radical Polymerization of Methyl Methacrylate: Functionalized Graphene as a Convenient Tool for Radical Initiator

Polymer nanocomposites have been synthesized by the covalent addition of bromide-functionalized graphene (Graphene-Br) through the single electron transfer-living radical polymerization technique (SET-LRP). Graphite functionalized with bromide for the first time via an efficient route using mild reagents has been designed to develop a graphene based radical initiator. The efficiency of sacrificial initiator (ethyl α-bromoisobutyrate) has also been compared with a graphene based initiator towards monitoring their Cu(0) mediated controlled molecular weight and morphological structures through mass spectroscopy (MOLDI-TOF) and field emission scanning electron microscopy (FE-SEM) analysis, respectively. The enhancement in thermal stability is observed for graphene-grafted-poly(methyl methacrylate) (G-g-PMMA) at 392 °C, which may be due to the influence ofthe covalent addition of graphene, whereas the sacrificial initiator used to synthesize G-graft-PMMA (S) has low thermal stability as analyzed by TGA. A significant difference is noticed on their glass transition and melting temperatures by DSC. The controlled formation and structural features of the polymer-functionalized-graphene is characterized by Raman, FT-IR, UV-Vis spectroscopy, NMR, and zeta potential measurements. The wettability measurements of the novel G-graft-PMMA on leather surface were found to be better in hydrophobic nature with a water contact angle of 109 ± 1°.

Electrochemical Biosensors Based on S-Layer Proteins

Designing and development of electrochemical biosensors enable molecule sensing and quantification of biochemical compositions with multitudinous benefits such as monitoring, detection, and feedback for medical and biotechnological applications. Integrating bioinspired materials and electrochemical techniques promote specific, rapid, sensitive, and inexpensive biosensing platforms for (e.g., point-of-care testing). The selection of biomaterials to decorate a biosensor surface is a critical issue as it strongly affects selectivity and sensitivity. In this context, smart biomaterials with the intrinsic self-assemble capability like bacterial surface (S-) layer proteins are of paramount importance. Indeed, by forming a crystalline two-dimensional protein lattice on many sensors surfaces and interfaces, the S-layer lattice constitutes an immobilization matrix for small biomolecules and lipid membranes and a patterning structure with unsurpassed spatial distribution for sensing elements and bioreceptors. This review aims to highlight on exploiting S-layer proteins in biosensor technology for various applications ranging from detection of metal ions over small organic compounds to cells. Furthermore, enzymes immobilized on the S-layer proteins allow specific detection of several vital biomolecules. The special features of the S-layer protein lattice as part of the sensor architecture enhances surface functionalization and thus may feature an innovative class of electrochemical biosensors.

Sensitivity and reproducibility improvements in a human plasma immunoassay with removal of clotting factors

Interferences in human plasma immunoassay are severe challenge that affects the sensitivity and reproducibility of the assay. The clotting factor fibrinogen is a negatively charged protein and is one of the most common sources of interference in immunoassays, and its removal increases the sensitivity and reproducibility. Here, we present a highly sensitive and reproducible method for the detection of prostate specific antigen (PSA) in human plasma immunoassays. Protamine sulfate, a highly positively charged protein, was used to precipitate fibrinogen via ionic interaction to improve the sensitivity and reproducibility of human plasma immunoassay. In a sandwich ELISA for PSA using plasma and protamine-treated plasma samples, the limit of detection was improved from 413 pg/mL in plasma to 235 pg/mL in protamine-treated plasma samples, and the coefficient of variation known as a measure of reproducibility was significantly lowered by protamine treatment. The use of protamine sulfate in human plasma immunoassays for detection of PSA using quartz crystal microbalance (QCM) biosensors resulted in increased sensitivity and reproducibility by about 2-fold and 3-fold, respectively, relative to when not using protamine sulfate. Based on these results, protamine sulfate was the best choice to increase the sensitivity and reproducibility in immunoassays using plasma samples.

pH-responsive allochroic nanoparticles for the multicolor detection of breast cancer biomarkers

Estrogen receptor (ER), progesterone receptor (PR), and human epidermal growth factor receptor-2 (HER2) are the three crucial biomarkers for the clinical diagnosis of breast cancer. Sensitive and precise detection of ER, PR, and HER2 is of great significance for the diagnosis of breast cancer. Herein, through a simple solvent-induced self-assembly process, the self-carried allochroic nanoparticles were prepared by using some hydrophobic pH indicator molecules for allochroic NPs-linked immunosorbent assay (named ALISA) of ER, PR, and HER2, respectively. Meanwhile, the introduction of bovine serum albumin (BSA) and antibody (Ab) enhanced the dispersity of the self-assembled nanoparticles as signal tags. Since the ultra-high loading and high-efficiency release of pH indicators, the ALISA exhibitssatisfactory selectivity and sensitivity, which demonstrated the great potential in the early diagnosis and postoperative monitoring of breast cancers. Furthermore, the smartphone was introduced to combine with the ALISA for point-of-care testing, indicating the high feasibility in practical applications.

Fabrication of a polypropylene immunoassay platform by photografting reaction

The technology of an immunoassay detection platform is critical to clinical disease diagnoses, especially for developing a medical diagnostic system. A polymer-based immunoassay platform was fabricated on nonwoven fabric polypropylene (PP) using a photografting reaction to graft 2-hydroxyethyl methacrylate (HEMA) and sulfobetaine (SBMA). The antifouling properties of PP-g-P(HEMA-co-SBMA) were investigated by fibrinogen adsorption and platelet adhesion. Carbonyldiimidazole was employed to activate the pendant hydroxyl groups in HEMA moieties and covalently coupled antibody molecules. The detection of the limit of the immunoassay platform was as low as 10 pg/mL. Antibody amount and bioactivity affected the availability of antibody and the sensitivity of immunoassay. The immune efficiency was dependent on the strategies of antibody immobilization. The immune efficiency of Au-g-P(SBMA-co-HEMA) and Au-SH surfaces measured by QCM-D was 165% and 35.7%, respectively. The covalently binding antibody via hydrophilic polymer chains as spacers could retain fragment antigen-binding up orientation, maintain the bioactivity of antibody, and mainly improve the accessibility of antibody molecules via adjusting the conformations of polymer chains when the antibodies recognized the antigens. Therefore, grafting hydrophilic polymers, such as zwitterionic PSBMA and reactive PHEMA onto nonwoven fabric PP, and binding antibody by covalent strategy had the potential to be developed as a commercial immunoassay platform.

3D Capillary-Driven Paper-Based Sequential Microfluidic Device for Electrochemical Sensing Applications

This article describes the device design and fabrication of two different configurations (flow-through and stopped-flow) of a sequential fluid delivery platform on a microfluidic paper-based device. The developed device is capable of storing and transporting reagents sequentially to the detection channel without the need for external power. The device comprises two components: an origami folding paper (oPAD) and a movable reagent-stored pad (rPAD). This 3D capillary-driven device eliminates the undesirable procedure of multiple-step reagent manipulation in a complex assay. To demonstrate the scope of this approach, the device is used for electrochemical detection of biological species. Using a flow-through configuration, a self-calibration plot plus real sample analysis using a single buffer introduction are established for ascorbic acid detection. We further broaden the effectiveness of the device to a complex assay using a stopped-flow configuration. Unlike other electrochemical paper-based sensors in which the user is required to cut off the device inlet or rest for the whole channel saturation before measurement, herein a stopped-flow device is carefully designed to exclude the disturbance from the convective mass transport. As a proof of concept, multiple procedures for electrode modification and voltammetric determination of serotonin are illustrated. In addition, the research includes an impedimetric label-free immunosensor for α-fetoprotein using the modified stopped-flow device. The beneficial advantages of simplicity, low sample volume (1 μL), and ability to perform a complex assay qualify this innovative device for use with diverse applications.

An electrochemical DNA biosensor analytic technique for identifying DNA methylation specific sites and quantify DNA methylation level

We herein developed a novel electrochemical biosensor to detect DNA methylation level, and to quantitatively analyze multiple methylated sites. Graphene oxide was modified with anti-5-methylcytosine antibody to specifically bind CpG methylation sites, and horseradish peroxidase (HRP)-labeled IgG secondary antibody was bound to the former antibody. In buffer containing H₂O₂ and hydroquinone, HRP-IgG catalyzed the oxidation of hydroquinone into benzoquinone over H₂O₂, thereby generating electrochemical reduction signals. The number of 5-methylcytosine was directly proportional to current signal, thereby allowing accurate quantification of methylation level. We also analyzed monomethylated target sequences with different sites. After different methylated sites were captured by the probe, the steric hindrance differences between -CH₃ hydrophobic sphere and the electrode surface were induced. The peak current decreased with reducing distance from the electrode surface, so DNA methylation sites were identified by measuring corresponding peak current responses. With a low detection limit (1 fM), this DNA biosensor was suitable for ultrasensitive DNA methylation detection. The linear detection range was 10^-15 M to 10^-8 M. Meanwhile, this method had high specificity, stability and repeatability, thus being widely applicable to the clinical detection of DNA methylation.

Applications of Gold Nanoparticles in Non-Optical Biosensors

Due to their unique properties, such as good biocompatibility, excellent conductivity, effective catalysis, high density, and high surface-to-volume ratio, gold nanoparticles (AuNPs) are widely used in the field of bioassay. Mainly, AuNPs used in optical biosensors have been described in some reviews. In this review, we highlight recent advances in AuNP-based non-optical bioassays, including piezoelectric biosensor, electrochemical biosensor, and inductively coupled plasma mass spectrometry (ICP-MS) bio-detection. Some representative examples are presented to illustrate the effect of AuNPs in non-optical bioassay and the mechanisms of AuNPs in improving detection performances are described. Finally, the review summarizes the future prospects of AuNPs in non-optical biosensors.

Materials Nanoarchitectonics for Mechanical Tools in Chemical and Biological Sensing

In this Focus Review, nanoarchitectonic approaches for mechanical-action-based chemical and biological sensors are briefly discussed. In particular, recent examples of piezoelectric devices, such as quartz crystal microbalances (QCM and QCM-D) and a membrane-type surface stress sensor (MSS), are introduced. Sensors need well-designed nanostructured sensing materials for the sensitive and selective detection of specific targets. Nanoarchitectonic approaches for sensing materials, such as mesoporous materials, 2D materials, fullerene assemblies, supported lipid bilayers, and layer-by-layer assemblies, are highlighted. Based on these sensing approaches, examples of bioanalytical applications are presented for toxic gas detection, cell membrane interactions, label-free biomolecular assays, anticancer drug evaluation, complement activation-related multiprotein membrane attack complexes, and daily biodiagnosis, which are partially supported by data analysis, such as machine learning and principal component analysis.

Fluorescent label-free quantitative detection of nano-sized bioparticles using a pillar array

Disease diagnostics requires detection and quantification of nano-sized bioparticles including DNA, proteins, viruses, and exosomes. Here, a fluorescent label-free method for sensitive detection of bioparticles is explored using a pillar array with micrometer-sized features in a deterministic lateral displacement (DLD) device. The method relies on measuring changes in size and/or electrostatic charges of 1 µm polymer beads due to the capture of target bioparticles on the surface. These changes can be sensitively detected through the lateral displacement of the beads in the DLD array, wherein the lateral shifts in the output translates to a quantitative measurement of bioparticles bound to the bead. The detection of albumin protein and nano-sized polymer vesicles with a concentration as low as 10 ng mL^-1 (150 pM) and 3.75 μg mL^-1, respectively, is demonstrated. This label-free method holds potential for point-of-care diagnostics, as it is low-cost, fast, sensitive, and only requires a standard laboratory microscope for detection.

Oxygen Plasma-Treated Graphene Oxide Surface Functionalization for Sensitivity Enhancement of Thin-Film Piezoelectric Acoustic Gas Sensors

In this work, we presented a thin-film piezoelectric acoustic gas sensor with enhanced sensitivity by a surface modification strategy of oxygen plasma treated graphene oxide (GO) functionalization. By exposing to ammonia vapor (NH₃) of various concentrations at controlled temperature and humidity, the characteristics of the GO-coated acoustic sensor were investigated, that is, sensitivity, linearity, response, and recovery time. Oxygen plasma treatment of the GO-coated sensor further enhanced the sensitivity compared with the freshly prepared GO-coated sensor. The mechanism of oxygen plasma treatment effect on the GO-coated sensor was discussed based on characterizations of X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, scanning electron microscope (SEM), and precise weighing of the acoustic sensor. It was found that the oxygen plasma treatment introduces numerous defects to GO flakes, which are uniformly distributed across the GO surface, providing more gas molecule binding sites.

Quartz crystal microbalance as an assay to detect anti-drug antibodies for the immunogenicity assessment of therapeutic biologics

Because of their biological origins, therapeutic biologics can trigger an unwanted deleterious immune response with some patients. The immunogenicity of therapeutic biologics can affect drug efficacy and patient safety by the production of circulating anti-drug antibodies (ADA). In this study, quartz crystal microbalance (QCM) was developed as an assay to detect ADA. Etanercept (Enbrel®) was covalently grafted to dextran-modified QCM surfaces. Rabbits were immunized with etanercept to generate ADA. Results showed the QCM assay could detect purified ADA from rabbits at concentrations as low as 50 ng/mL, within the sensitivity range of ELISA. The QCM assay could also assess the ADA isotype. It was shown that the ADA were composed of the IgG isotype, but not IgM, as expected. Furthermore, it was shown that QCM surfaces that had been used to detect ADA could be regenerated in glycine-HCl solution and reused. The QCM assay was also demonstrated to detect ADA in crude serum samples. Serum was collected from the rabbits and analyzed before and after etanercept immunization. ADA were clearly detected in serum from rabbits after immunization, but not in serum before immunization. Serum from patients administered with etanercept for rheumatoid arthritis (RA) treatment was also analyzed and compared to serum from healthy donors. Sera from 10 RA patients were analyzed. Results showed one of the RA patient serum samples may have ADA present. In conclusion, QCM appears to be a viable assay to detect ADA for the immunogenicity assessment of therapeutic biologics.

Binary Nanoparticle Graphene Hybrid Structure-Based Highly Sensitive Biosensing Platform for Norovirus-Like Particle Detection

Nanoparticle (NP)-decorated carbon nanotubes or graphenes (GRPs) have attracted attention because of their synergic properties such as enhanced electrical conductivity, magneto-optical effect, and plasmon resonance energy transfer. These hybrid carbon nanomaterials are widely used in sensing platforms to monitor target biomolecules, gases, and chemicals. In this study, binary nanoparticles, specifically gold (Au)/magnetic nanoparticle (MNP)-decorated graphenes (GRPs), were applied in a virus-sensing platform. This hybrid material exhibited multiple functionalities, including magnetic, plasmonic, and enhanced electrical properties. The Au/MNP-GRPs were synthesized in two steps at room temperature under mild conditions and magnetically deposited on a Pt-interdigitated electrode as electrical-sensing channels. After deposition onto the electrode, the surface of Au/MNP-GRPs was conjugated with norovirus antibody to produce a norovirus-like particle (NoV-LP)-sensing platform. NoV-LPs were successfully detected by the hybrid nanomaterial-sensing platform, exhibiting high sensitivity and specificity in a concentration range from 0.01 pg to 1 ng. In this case, the limit of detection was calculated as 1.16 pg/mL. Thus, the binary nanoparticle-decorated graphene shows excellent potential as an electrical-sensing platform for biomolecules.

Simulation Analysis of Improving Microfluidic Heterogeneous Immunoassay Using Induced Charge Electroosmosis on a Floating Gate

On-chip immuno-sensors are a hot topic in the microfluidic community, which is usually limited by slow diffusion-dominated transport of analytes in confined microchannels. Specifically, the antigen-antibody binding reaction at a functionalized area cannot be provided with enough antigen source near the reaction surface, since a small diffusion flux cannot match with the quick rate of surface reaction, which influences the response time and sensitivity of on-chip heterogeneous immunoassay. In this work, we propose a method to enhance the transportation of biomolecules to the surface of an antibody-immobilized electrode with induce charge electroosmotic (ICEO) convection in a low concentration suspension, so as to improve the binding efficiency of microfluidic heterogeneous immunoassays. The circular stirring fluid motion of ICEO on the surface of a floating gate electrode at the channel bottom accelerates the transport of freely suspended antigen towards the wall-immobilized antibodies. We investigate the dependence of binding efficiency on voltage magnitude and field frequency of the applied alternate current (AC) electrical field. The binding rate yields a factor of 5.4 higher binding for an applied voltage of 4 V at 10 Hz when the Damkohler number is 1000. The proposed microfluidic immuno-sensor technology of a simple electrode structure using ICEO convective fluid flow around floating conductors could offer exciting opportunities for diffusion-limited on-chip bio-microfluidic sensors.

Controlling enzymatic activity by immobilization on graphene oxide

In this study, graphene oxide (GO) has been applied as a matrix for enzyme immobilization. The protein adsorption capacity of GO is much higher than of other large surface area carbonaceous materials. Its structure and physicochemical properties are reported beneficial also for enzymatic activity modifications. The experimental proof was done here that GO-based biocatalytic systems with immobilized catalase are modifiable in terms of catalyzed reaction kinetic constants. It was found that activity and stability of catalase, considered here as model enzyme, closely depend on enzyme/GO ratio. The changes in kinetic parameters can be related to secondary structure alterations. The correlation between enzyme/GO ratio and kinetic and structure parameters is reported for the first time and enables the conscious control of biocatalytic processes and their extended applications. The biological activity of obtained biocatalytic systems was confirmed in vitro by the use of functional test. The addition of immobilized catalase improved the cells' viability after they were exposed to hydrogen peroxide and tert-butyl-hydroperoxide used as source of reactive oxygen species.

Probing the Dynamic Interaction between Damaged DNA and a Cellular Responsive Protein Using a Piezoelectric Mass Biosensor

The binding events between damaged DNA and recognition biomolecules are of great interest for understanding the activity of DNA-damaging drugs and the related DNA repair networks. Herein, a simple and sensitive sensor system was tailored for real-time probing of the dynamic molecular recognition between cisplatin-damaged-DNA (cisPt-DNA) and a cellular responsive protein, high-mobility-group box 1 (HMGB1). By integration of flow injection analysis (FIA) with quartz crystal microbalance (QCM), the interaction time-course of cisPt-DNA and HMGB1 domain A (HMGB1a) was investigated. The highly specific sensing interface was carefully designed and fabricated using cisPt-DNA as recognition element. A hybrid self-assembled monolayer consisting of cysteamine and mercaptohexanol was introduced to resist nonspecific adsorption. The calculated kinetic parameters (k_ass and k_diss) and the dissociation constant (K_D) demonstrated the rapid recognition and tight binding of HMGB1a toward cisPt-DNA. Molecular docking was employed to simulate the complex formed by cisPt-DNA and HMGB1a. The tight binding of such a DNA-damage responsive complex is appealing for the downstream molecular recognition event related to the resistance to DNA repair. This continuous-flow QCM biosensor is an ideal tool for studying specific interactions between drug-damaged-DNAs and their recognition proteins in a physiological-relevant environment, and will provide a potential sensor platform for rapid screening and evaluating metal anticancer drugs.

Sensitive detection of protein biomarkers using silver nanoparticles enhanced immunofluorescence assay

Detection of biomarkers is extremely important for the early diagnosis of diseases. Here, we developed an easy and highly sensitive fluorescence detection system for the determination of biomarkers by combining the rapid separation of magnetic beads and silver nanoparticles labeled antibodies. An ultrasensitive silver ions fluorescence probe 3', 6'-bis (diethylamino)-2-(2-iodoethyl) spiro[isoindoline-1, 9'-xanthen]-3-one (Ag+-FP) was applied to immunoassay. A significant signal amplification was achieved as the AgNPs can be dissolved by H2O2 and generate numerous Ag+, which would turn "on" the fluorescence of Ag+-FP. Using α-fetoprotein (AFP) and C-reactive protein (CRP) as target analytes, good linear responses were obtained from 0.1 to 10 ng mL-1 and the limits of detection (LOD) were as low as 70 pg·mL-1 and 30 pg·mL-1, respectively. In addition, the developed system was further evaluated for the detection of real samples including 30 positive serum specimens obtained from hepatocarcinoma patients and 20 negative serum samples, and performs as well as the commercial electrochemiluminescence immunoassay (ECLI) method with less cost and more convenience. Thus, the designed detection system can be used as a promising platform for the detection of a variety of biomarkers and served as a powerful tool in clinical diagnosis.