Modification of Titanium Substrates with Chimeric Peptides Comprising Antimicrobial and Titanium-Binding Motifs Connected by Linkers To Inhibit Biofilm Formation

The Effect of Antibacterial-Osteogenic Surface Modification on the Osseointegration of Titanium Implants: A Static and Dynamic Strategy

Titanium (Ti) and its alloys are widely used biomaterials in bone repair. Although these biomaterials possess stable properties and good biocompatibility, the high elastic modulus and low surface activity of Ti implants have often been associated with infection, inflammation, and poor osteogenesis. Therefore, there is an urgent need to modify the surface of Ti implants, where changes in surface morphology or coatings loading can confer specific functions to help them adapt to the osseointegration formation phase and resist bacterial infection. This can further ensure a healthy microenvironment for bone regeneration as well as the promotion of immunomodulation, angiogenesis, and osteogenesis. Therefore, in this review, we evaluated various functional Ti implants after surface modification, both in terms of static modifications and dynamic response strategies, mainly focusing on the synergistic effects of antimicrobial activities and functionalized osteogenic. Finally, the current challenges and future perspectives are summarized to provide innovative and effective solutions for osseointegration and bone defect repair.

Biomaterials science and surface engineering strategies for dental peri-implantitis management

Peri-implantitis is a bacterial infection that causes soft tissue inflammatory lesions and alveolar bone resorption, ultimately resulting in implant failure. Dental implants for clinical use barely have antibacterial properties, and bacterial colonization and biofilm formation on the dental implants are major causes of peri-implantitis. Treatment strategies such as mechanical debridement and antibiotic therapy have been used to remove dental plaque. However, it is particularly important to prevent the occurrence of peri-implantitis rather than treatment. Therefore, the current research spot has focused on improving the antibacterial properties of dental implants, such as the construction of specific micro-nano surface texture, the introduction of diverse functional coatings, or the application of materials with intrinsic antibacterial properties. The aforementioned antibacterial surfaces can be incorporated with bioactive molecules, metallic nanoparticles, or other functional components to further enhance the osteogenic properties and accelerate the healing process. In this review, we summarize the recent developments in biomaterial science and the modification strategies applied to dental implants to inhibit biofilm formation and facilitate bone-implant integration. Furthermore, we summarized the obstacles existing in the process of laboratory research to reach the clinic products, and propose corresponding directions for future developments and research perspectives, so that to provide insights into the rational design and construction of dental implants with the aim to balance antibacterial efficacy, biological safety, and osteogenic property.

Additively Manufactured SiO2 and Cu-Added Ti Implants for Synergistic Enhancement of Bone Formation and Antibacterial Efficacy

Commercially pure titanium (CpTi), a bioinert metal, is used as an implant material at low load-bearing sites and as a porous coating on Ti6Al4V at high load-bearing sites. There is an unmet need for metallic biomaterials to improve osseointegration and inherent antimicrobial resistance. In this study, we have added 1 wt % SiO2 and 3 wt % Cu to the CpTi matrix and processed via metal additive manufacturing (AM). Si4+ ions promote angiogenesis and osteogenesis. CpTi-SiO2 composition exhibited 4.5 times higher bone formation at the bone-implant interface over CpTi in an in vivo study with a rat distal femur model. In vitro bacterial studies with Gram-positive Staphylococcus aureus bacterium revealed 85% antibacterial efficacy by CpTi-SiO2-3Cu than CpTi. CpTi-SiO2-3Cu did not show any inflammatory markers in vivo, indicating the absence of cytotoxicity, but displayed delayed osseointegration compared to CpTi-SiO2. CpTi-SiO2-3Cu displayed 3-fold higher mineralized bone formation than CpTi. Our results emphasize the synergistic effect of SiO2 and Cu addition in CpTi, promoting enhanced early stage osseointegration and inherent antibacterial efficacy, contributing toward implant longevity and stability in vivo.

Marriage of High-Throughput Gradient Surface Generation With Statistical Learning for the Rational Design of Functionalized Biomaterials

Functional biomaterial is already an important aspect in modern therapeutics; yet, the design of novel multi-functional biomaterial is still a challenging task nowadays. When several biofunctional components are present, the complexity that arises from their combinations and interactions will lead to tedious trial-and-error screening. In this work, a novel strategy of biomaterial rational design through the marriage of gradient surface generation with statistical learning is presented. Not only can parameter combinations be screened in a high-throughput fashion, but also the optimal conditions beyond the experimentally tested range can be extrapolated from the models. The power of the strategy is demonstrated in rationally designing an unprecedented ternary functionalized surface for orthopedic implant, with optimal osteogenic, angiogenic, and neurogenic activities, and its optimality and the best osteointegration promotion are confirmed in vitro and in vivo, respectively. The presented strategy is expected to open up new possibilities in the rational design of biomaterials.

Plasmonic inhibition of bacterial adhesion on gold-decorated mesoporous zirconium oxide thin films

Preventing bacterial development on surfaces is essential to avoid problems caused by biofouling. Surfaces decorated with gold nanoparticles have been shown to thermally kill bacteria under high-intensity NIR illumination. In this study, we evaluated the colonization by E. coli of nanostructured surfaces composed of mesoporous zirconia thin films, both with and without gold nanoparticles embedded into the pores. We studied the effect of the nanostructure and of low intensity visible light excitation of the gold nanoparticles on the colonization process. We found that neither the zirconia, nor the presence of pores, or even gold nanoparticles affect bacterial adhesion compared to the bare glass substrate. Therefore, mesoporous zirconia thin films are biologically inert scaffolds that enable the construction of robust surfaces containing functional nanoparticles that can affect bacterial growth. When the gold containing surfaces are irradiated with light, bacterial adhesion shows a remarkable 96 ± 4% reduction. Our studies revealed that these surfaces affect early colonization steps, prior to biofilm formation, preventing bacterial adhesion without affecting its viability. In contrast to related systems where plasmonic excitation induces membrane damage due to strong local heating, the membrane integrity is preserved, showing that these surfaces have a different working principle.

Improving dental epithelial junction on dental implants with bioengineered peptides

Introduction: The functionalization of titanium (Ti) and titanium alloys (Ti6Al4V) implant surfaces via material-specific peptides influence host/biomaterial interaction. The impact of using peptides as molecular linkers between cells and implant material to improve keratinocyte adhesion is reported. Results: The metal binding peptides (MBP-1, MBP-2) SVSVGMKPSPRP and WDPPTLKRPVSP were selected via phage display and combined with laminin-5 or E-cadherin epithelial cell specific peptides (CSP-1, CSP-2) to engineer four metal-cell specific peptides (MCSPs). Single-cell force spectroscopy and cell adhesion experiments were performed to select the most promising candidate. In vivo tests using the dental implant for rats showed that the selected bi functional peptide not only enabled stable cell adhesion on the trans-gingival part of the dental implant but also arrested the unwanted apical migration of epithelial cells. Conclusion: The results demonstrated the outstanding performance of the bioengineered peptide in improving epithelial adhesion to Ti based implants and pointed towards promising new opportunities for applications in clinical practice.

Biodegradable and Cytocompatible Hydrogel Coating with Antibacterial Activity for the Prevention of Implant-Associated Infection

Implant-associated infection (IAI) caused by pathogens colonizing on the implant surface is a serious issue in the trauma-orthopedic surgery, which often leads to implant failure. The complications of IAI bring a big threat to the clinical practice of implants, accompanied by significant economic cost and long hospitalization time. In this study, we propose an antibiotics-free strategy to address IAI-related challenges by using a biodegradable and cytocompatible hydrogel coating. To achieve this, a novel hydrogel system was developed to combine the synergistic effects of good cell affinity and antibacterial properties. The hydrogel material was prepared by modifying a photocross-linkable gelatin-based polymer (GelMA) with cationic quaternary ammonium salt (QAS) groups via a mild and simple synthesis procedure. By engineering the length of the hydrophobic carbon chain on the QAS group and the degree of functionalization, the resulting GelMA-octylQAS hydrogel exhibited an integration of good mechanical properties, biodegradability, excellent bactericidal activity against various types of bacteria, and high cytocompatibility with mammalian cells. When coated onto the implant via the in situ cross-linking procedure, our hydrogel demonstrated superior antimicrobial ability in the infective model of femoral fracture of rats. Our results suggest that the GelMA-octylQAS hydrogel might provide a promising platform for preventing and treating IAI.

Biomedical applications of solid-binding peptides and proteins

Over the past decades, solid-binding peptides (SBPs) have found multiple applications in materials science. In non-covalent surface modification strategies, solid-binding peptides are a simple and versatile tool for the immobilization of biomolecules on a vast variety of solid surfaces. Especially in physiological environments, SBPs can increase the biocompatibility of hybrid materials and offer tunable properties for the display of biomolecules with minimal impact on their functionality. All these features make SBPs attractive for the manufacturing of bioinspired materials in diagnostic and therapeutic applications. In particular, biomedical applications such as drug delivery, biosensing, and regenerative therapies have benefited from the introduction of SBPs. Here, we review recent literature on the use of solid-binding peptides and solid-binding proteins in biomedical applications. We focus on applications where modulating the interactions between solid materials and biomolecules is crucial. In this review, we describe solid-binding peptides and proteins, providing background on sequence design and binding mechanism. We then discuss their application on materials relevant for biomedicine (calcium phosphates, silicates, ice crystals, metals, plastics, and graphene). Although the limited characterization of SBPs still represents a challenge for their design and widespread application, our review shows that SBP-mediated bioconjugation can be easily introduced into complex designs and on nanomaterials with very different surface chemistries.

Peptides in Dentistry: A Scoping Review

Currently, it remains unclear which specific peptides could be appropriate for applications in different fields of dentistry. The aim of this scoping review was to scan the contemporary scientific papers related to the types, uses and applications of peptides in dentistry at the moment. Literature database searches were performed in the following databases: PubMed/MEDLINE, Scopus, Web of Science, Embase, and Scielo. A total of 133 articles involving the use of peptides in dentistry-related applications were included. The studies involved experimental designs in animals, microorganisms, or cells; clinical trials were also identified within this review. Most of the applications of peptides included caries management, implant osseointegration, guided tissue regeneration, vital pulp therapy, antimicrobial activity, enamel remineralization, periodontal therapy, the surface modification of tooth implants, and the modification of other restorative materials such as dental adhesives and denture base resins. The in vitro and in vivo studies included in this review suggested that peptides may have beneficial effects for treating early carious lesions, promoting cell adhesion, enhancing the adhesion strength of dental implants, and in tissue engineering as healthy promotors of the periodontium and antimicrobial agents. The lack of clinical trials should be highlighted, leaving a wide space available for the investigation of peptides in dentistry.

SIS membrane modification to improve antimicrobial and osteogenic properties for guide bone regeneration

The guided bone regeneration (GBR) technique is the most common and durable approach to repairing bone defects in periodontal surgery. However, membrane exposure causes bacterial infiltration, which lowers the functional integrity of the barrier membrane and destroys bone repair. Here, an antibacterial peptide-modified small intestinal submucosa (SIS) membrane is used as a new GBR membrane for effective bone regeneration. The peptide JH8194 was placed into chitosan microspheres to preserve its stability and allow for sustained release, which realizes rapid and efficient functional modification of the SIS membrane. Biocompatibility and certain antibacterial activities were found in the modified SIS membrane (SIS@CS-JH8194). Additionally, in vitro experiments showed that SIS@CS-JH8194 promoted the expression of osteogenic-related factors and decreased the secretion of inflammatory factors in rat bone mesenchymal stem cells. In vivo experiments showed that SIS@CS-JH8194 could effectively promote bone regeneration in rat skull defects. In this work, we created a new antibacterial GBR membrane to help avoid postoperative infection and improve bone tissue regeneration.

A drug delivery system constructed by a fusion peptide capturing exosomes targets to titanium implants accurately resulting the enhancement of osseointegration peri-implant

BACKGROUND

Exosomes derived from bone marrow mesenchymal stem cells (BMSC-exos) have been shown triggering osteogenic differentiation and mineralization of MSCs, but exosomes administered via bolus injections are rapidly sequestered and cleared. Therefore, we considered the implant as a new organ of patient's body and expected to find a method to treat implant with BMSC-exos in vivo directly.

METHODS

A fusion peptide (PEP), as a drug delivery system (DDS) which contained a titanium-binding peptide (TBP) possessing the ability to selectively bind to the titanium surface and another peptide CP05 being able to capture exosomes expertly, is constructed to modify the titanium surface.

RESULTS

Both in vitro and in vivo experiments prove PEP retains the ability to bind titanium and exosome simultaneously, and the DDS gain the ability to target exosomes to titanium implants surface following enhancing osseointegration post-implantation. Moreover, the DDS constructed by exosomes of diverse origins shows the similar combination rate and efficiency of therapy.

CONCLUSION

This drug delivery system demonstrates the concept that EXO-PEP system can offer an accurate and efficient therapy for treating implants with long-term effect.

Antimicrobial Peptides with Rigid Linkers against Gram-Negative Bacteria by Targeting Lipopolysaccharide

A series of hybrid peptides were designed by connecting an antimicrobial peptide Ce(1-8) with a lipopolysaccharide (LPS)-targeting peptide Lf(28-34) via different linkers. Antimicrobial experimental results indicated that linkers play an essential role in the anti-Gram-negative bacterial activity of the hybrid peptides. Among these hybrid peptides, peptide CL5 with dipeptide rigid linker LP exhibited excellent activity and selectivity against Gram-negative bacteria. The minimum inhibitory concentrations of CL5 against the tested Gram-negative bacteria were 4-32 μM, while the toxicity toward HEK-293 cells was relatively low. It was found that the interactions of the peptides with LPS were crucial for peptide activity against Gram-negative bacteria. Antimicrobial mechanistic studies showed that peptide CL5 contributed to the death of Gram-negative bacterial cells by disrupting the integrity of the bacterial membranes. This study revealed the importance of linker selection in the design of hybrid peptides and provides the basis for the further development of antimicrobial peptides.

Surface modification of titanium with antibacterial porous N-halamine coating to prevent peri-implant infection

Peri-implant infection remains one of the greatest threats to orthopedics. The construction of bone implants with good antibacterial and osteogenic properties is beneficial for reducing the risk of implant-related infections and healing bone defects. In this study, N-halamine coating (namely N-Cl) was grafted onto alkali-heat treated titanium (Ti) using polydopamine to endow Ti-based orthopedic implants with strong bactericidal activity. Surface characterization revealed that the N-Cl coating has porous structure loaded with active chlorine (Cl⁺). The N-Cl coating also provided micro/nano-structured Ti surfaces with excellent antibacterial ability via transformation between N-H and N-Cl, and approximately 100% disinfection was achieved. Furthermore, the as-prepared N-Cl coating exhibited good biocompatibility and osteogenesis abilityin vitro. These results indicate that applying N-Cl coatings on Ti could prevent and treat peri-implant infections.

Applications of Material-Binding Peptides: A Review

Material-binding peptides (MBPs) are functionalized adhesive materials consisting of a few to several dozen amino acids. This affinity between MBPs and materials is regulated by multiple interactions, including hydrogen bonding, electrostatic, hydrophobic interactions, and π-π stacking. They show selective binding and high affinity to a diverse range of inorganic and organic materials, such as silicon-based materials, metals, metal compounds, carbon materials, and polymers. They are used to improve the biocompatibility of materials, increase the efficiency of material synthesis, and guide the controlled synthesis of nanomaterials. In addition, these can be used for precise targeting of proteins by conjugating to target biomolecules. In this review, we summarize the main designs and applications of MBPs in recent years. The discussions focus on more efficient and functional peptides, including evolution and overall design of MBPs. We have also highlighted the recent applications of MBPs, such as functionalization of material surfaces, synthesis of nanomaterials, drug delivery, cancer therapy, and plastic degradation. Besides, we also discussed the development trend of MBPs. This interpretation will accelerate future investigations to bottleneck the drawbacks of available MBPs, promoting their commercial applications.

Synergetic osteogenesis of extracellular vesicles and loading RGD colonized on 3D-printed titanium implants

Titanium (Ti) and its alloys have been universally used as surgical implants, and the clinical need for modifying titanium surfaces to accelerate early stage osseointegration and prevent implant loosening is in huge demand. 3D printing technology is an accurate and controllable method to create titanium implants with complex nanostructures, which provide enough space to react and fit in the microenvironment of cells. Recently, extracellular vesicles (EVs) have attracted attention in promoting osteogenesis. The vesicles derived from bone marrow mesenchymal stem cells (BMSC-EVs) have been proved to pack osteogenic-relative RNAs thereby regulating the osteogenic differentiation and mineralization of the target BMSCs. Arg-Gly-Asp (RGD)-derived peptides are typical peptides used to improve cell attachment and proliferation in bone tissue engineering. A novel strategy is proposed to load RGD-derived peptides on EVs with a fusion peptide (EVsRGD) and colonize EVsRGD on the titanium surface via a specific bonding peptide. In this study, we verify that the presence of EVsRGD enables the realization of the synergetic effect of EVs and RGD, enhancing the osteogenic differentiation and mineralization of BMSCs in vitro, resulting in satisfactory osseointegration around implants in vivo.

Applications of Titanium Dioxide Nanostructure in Stomatology

Breakthroughs in the field of nanotechnology, especially in nanochemistry and nanofabrication technologies, have been attracting much attention, and various nanomaterials have recently been developed for biomedical applications. Among these nanomaterials, nanoscale titanium dioxide (nano-TiO₂) has been widely valued in stomatology due to the fact of its excellent biocompatibility, antibacterial activity, and photocatalytic activity as well as its potential use for applications such as dental implant surface modification, tissue engineering and regenerative medicine, drug delivery carrier, dental material additives, and oral tumor diagnosis and treatment. However, the biosafety of nano-TiO₂ is controversial and has become a key constraint in the development of nano-TiO₂ applications in stomatology. Therefore, in this review, we summarize recent research regarding the applications of nano-TiO₂ in stomatology, with an emphasis on its performance characteristics in different fields, and evaluations of the biological security of nano-TiO₂ applications. In addition, we discuss the challenges, prospects, and future research directions regarding applications of nano-TiO₂ in stomatology that are significant and worthy of further exploration.

Functional extracellular matrix hydrogel modified with MSC-derived small extracellular vesicles for chronic wound healing

OBJECTIVES

Diabetic wound healing remains a global challenge in the clinic and in research. However, the current medical dressings are difficult to meet the demands. The primary goal of this study was to fabricate a functional hydrogel wound dressing that can provide an appropriate microenvironment and supplementation with growth factors to promote skin regeneration and functional restoration in diabetic wounds.

MATERIALS AND METHODS

Small extracellular vesicles (sEVs) were bound to the porcine small intestinal submucosa-based hydrogel material through peptides (SC-Ps-sEVs) to increase the content and achieve a sustained release. NIH3T3 cell was used to evaluate the biocompatibility and the promoting proliferation, migration and adhesion abilities of the SC-Ps-sEVs. EA.hy926 cell was used to evaluate the stimulating angiogenesis of SC-Ps-sEVs. The diabetic wound model was used to investigate the function/role of SC-Ps-sEVs hydrogel in promoting wound healing.

RESULTS

A functional hydrogel wound dressing with good mechanical properties, excellent biocompatibility and superior stimulating angiogenesis capacity was designed and facilely fabricated, which could effectively enable full-thickness skin wounds healing in diabetic rat model.

CONCLUSIONS

This work led to the development of SIS, which shows an unprecedented combination of mechanical, biological and wound healing properties. This functional hydrogel wound dressing may find broad utility in the field of regenerative medicine and may be similarly useful in the treatment of wounds in epithelial tissues, such as the intestine, lung and liver.

Multi-Stimulus Responsive Multilayer Coating for Treatment of Device-Associated Infections

Antibacterial coating with antibiotics is highly effective in avoiding device-associated infections (DAIs) which is an unsolved healthcare problem that causes significant morbidity and mortality rates. However, bacterial drug resistance caused by uncontrolled release of antibiotics seriously restricts clinical efficacy of antibacterial coating. Hence, a local and controlled-release system which can release antibiotics in response to bacterial infected signals is necessary in antibacterial coating. Herein, a multi-stimulus responsive multilayer antibacterial coating was prepared through layer-by-layer (LbL) self-assembly of montmorillonite (MMT), chlorhexidine acetate (CHA) and Poly(protocatechuic acid-polyethylene glycol 1000-bis(phenylboronic acid carbamoyl) cystamine) (PPPB). The coating can be covered on various substrates such as cellulose acetate membrane, polyacrylonitrile membrane, polyvinyl chloride membrane, and polyurethane membrane, proving it is a versatile coating. Under the stimulation of acids, glucose or dithiothreitol, this coating was able to achieve controlled release of CHA and kill more than 99% of Staphylococcus aureus and Escherichia coli (4 × 108 CFU/mL) within 4 h. In the mouse infection model, CHA releasing of the coating was triggered by infected microenvironment to completely kill bacteria, achieving wounds healing within 14 days.

Antimicrobial peptide-based materials: opportunities and challenges

The multifunctional properties of antimicrobial peptides (AMPs) make them attractive candidates for the treatment of various diseases. AMPs are considered alternatives to antibiotics due to the rising number of multidrug-resistant...

Novel fusion peptides deliver exosomes to modify injectable thermo-sensitive hydrogels for bone regeneration

Injectable thermo-sensitive hydrogels composed of small intestinal submucosa (SIS) with exosomes derived from bone marrow mesenchymal stem cells (BMSCs) are desired for bone regeneration. However, poor mechanical properties limit the clinical application of SIS hydrogels. Herein, the mechanical properties of SIS hydrogels incorporated with 3-(3,4-dihydroxyphenyl) propionic acid (CA) are assessed. The results show that the mechanical properties of SIS hydrogels are improved. In addition, the retention and stability of exosomes over time at the defect site are also challenges. Fusion peptides are designed by connecting collagen-binding domines (CBDs) of collagen type I/III with exosomal capture peptides CP05 (CRHSQMTVTSRL) directly or via rigid linkers (EAAAK). In vitro experiments demonstrate that fusion peptides are contribute to promoting the positive effect of exosomes on osteogenic differentiation of BMSCs. Meanwhile, the results of hydrogels combining exosomes and fusion peptides in the treatment of rat skull defect models reveal that fusion peptides could enhance the retention and stability of exosomes, thereby strengthen the therapeutic effect for skull defects. Therefore, SIS hydrogels with CA modified by fusion peptides and exosomes appear to be a promising strategy in bone regenerative medicine.

Martins MC, Costa F. Antimicrobial Peptides in the Battle against Orthopedic Implant-Related Infections: A Review

Prevention of orthopedic implant-related infections is a major medical challenge, particularly due to the involvement of biofilm-encased and multidrug-resistant bacteria. Current therapies, based on antibiotic administration, have proven to be insufficient, and infection prevalence may rise due to the dissemination of antibiotic resistance. Antimicrobial peptides (AMPs) have attracted attention as promising substitutes of conventional antibiotics, owing to their broad-spectrum of activity, high efficacy at very low concentrations, and, importantly, low propensity for inducing resistance. The aim of this review is to offer an updated perspective of the development of AMPs-based preventive strategies for orthopedic and dental implant-related infections. In this regard, two major research strategies are herein addressed, namely (i) AMP-releasing systems from titanium-modified surfaces and from bone cements or beads; and (ii) AMP immobilization strategies used to graft AMPs onto titanium or other model surfaces with potential translation as coatings. In overview, releasing strategies have evolved to guarantee higher loadings, prolonged and targeted delivery periods upon infection. In addition, avant-garde self-assembling strategies or polymer brushes allowed higher immobilized peptide surface densities, overcoming bioavailability issues. Future research efforts should focus on the regulatory demands for pre-clinical and clinical validation towards clinical translation.

Surface Design for Antibacterial Materials: From Fundamentals to Advanced Strategies

Healthcare-acquired infections as well as increasing antimicrobial resistance have become an urgent global challenge, thus smart alternative solutions are needed to tackle bacterial infections. Antibacterial materials in biomedical applications and hospital hygiene have attracted great interest, in particular, the emergence of surface design strategies offer an effective alternative to antibiotics, thereby preventing the possible development of bacterial resistance. In this review, recent progress on advanced surface modifications to prevent bacterial infections are addressed comprehensively, starting with the key factors against bacterial adhesion, followed by varying strategies that can inhibit biofilm formation effectively. Furthermore, "super antibacterial systems" through pre-treatment defense and targeted bactericidal system, are proposed with increasing evidence of clinical potential. Finally, the advantages and future challenges of surface strategies to resist healthcare-associated infections are discussed, with promising prospects of developing novel antimicrobial materials.

Construction and Characterizations of Antibacterial Surfaces Based on Self-Assembled Monolayer of Antimicrobial Peptides (Pac-525) Derivatives on Gold

Background: Infection that is related to implanted biomaterials is a serious issue in the clinic. Antimicrobial peptides (AMPs) have been considered as an ideal alternative to traditional antibiotic drugs, for the treatment of infections, while some problems, such as aggregation and protein hydrolysis, are still the dominant concerns that compromise their antimicrobial efficiency in vivo. Methods: In this study, antimicrobial peptides underwent self-assembly on gold substrates, forming good antibacterial surfaces, with stable antibacterial behavior. The antimicrobial ability of AMPs grafted on the surfaces, with or without glycine spaces or a primer layer, was evaluated. Results: Specifically, three Pac-525 derivatives, namely, Ac-CGn-KWRRWVRWI-NH2 (n = 0, 2, or 6) were covalently grafted onto gold substrates via the self-assembling process for inhibiting the growth of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Furthermore, the alkanethiols HS(CH)10SH were firstly self-assembled into monolayers, as a primer layer (SAM-SH) for the secondary self-assembly of Pac-525 derivatives, to effectively enhance the bactericidal performance of the grafted AMPs. The -(CH)10-S-S-G6Pac derivative was highly effective against S. aureus and E. coli, and reduced the viable amount of E. coli and S. aureus to 0.4% and 33.2%, respectively, after 24 h of contact. In addition, the immobilized AMPs showed good biocompatibility, promoting bone marrow stem cell proliferation. Conclusion: the self-assembled monolayers of the Pac-525 derivatives have great potential as a novel therapeutic method for the treatment of implanted biomaterial infections.

The prospects of antimicrobial coated medical implants

The implants are increasingly being a part of modern medicine in various surgical procedures for functional or cosmetic purposes. The progressive use of implants is associated with increased infectious complications and prevention of such infections always remains precedence in the clinical settings. The preventive approaches include the systemic administration of antimicrobial agents before and after the surgical procedures as well as the local application of antibiotics. The relevant literature and existing clinical practices have highlighted the role of antimicrobial coating approaches in the prevention of implants associated infections, although the applications of these strategies are not yet standardized, and the clinical efficacy is not much clear. The adequate data from the randomized control trials is challenging because of the unavailability of a large sample size although it is compulsory in this context to assess the clinical efficacy of preemptive practices. This review compares the efficacy of preventive approaches and the prospects of antimicrobial-coated implants in preventing implant-related infections.

The Antibacterial Effectiveness of Propolis on Medical Screws

Background

Medical screws are widely used in orthopedic surgery for fracture fixation. The antibacterial effectiveness of propolis is well known. In this study, we aimed to demonstrate the antibacterial effectiveness of medical screws coated with propolis.

Methodology

Between March 2019 and April 2020, we formed five experimental groups and investigated the antibacterial activities of different amounts of propolis and polymer-coated screws. Staphylococcus aureus was used to determine the antibacterial activity. Carbopol, chosen as the model polymer, was used to improve the adhesion of propolis to the screws. Agar diffusion test of surface-coated screws was used to evaluate the antibacterial effect.

Results

The mean zone diameters were 24.3 ± 1.1, 23.0 ± 0.8, 21.8 ± 1.6, 19.3 ± 0.6, and 20.2 ± 0.8 mm for IS-7.5, IS-5.0, IS-2.5, IS-P, and IS-P-7.5, respectively. The IS-7.5 group had the most antibacterial activities. The antibacterial activities of the medical screws determined using the agar diffusion method were significantly increased by the propolis coating on the screws. Our results showed that the propolis-coated screws had antibacterial activity against S. aureus.

Conclusions

As a result, we believe that the combination of gel and propolis is an effective method in increasing the antibacterial resistance of medical screws and preventing the formation of a biofilm layer of microorganisms.

High-throughput screening and rational design of biofunctionalized surfaces with optimized biocompatibility and antimicrobial activity

Peptides are widely used for surface modification to develop improved implants, such as cell adhesion RGD peptide and antimicrobial peptide (AMP). However, it is a daunting challenge to identify an optimized condition with the two peptides showing their intended activities and the parameters for reaching such a condition. Herein, we develop a high-throughput strategy, preparing titanium (Ti) surfaces with a gradient in peptide density by click reaction as a platform, to screen the positions with desired functions. Such positions are corresponding to optimized molecular parameters (peptide densities/ratios) and associated preparation parameters (reaction times/reactant concentrations). These parameters are then extracted to prepare nongradient mono- and dual-peptide functionalized Ti surfaces with desired biocompatibility or/and antimicrobial activity in vitro and in vivo. We also demonstrate this strategy could be extended to other materials. Here, we show that the high-throughput versatile strategy holds great promise for rational design and preparation of functional biomaterial surfaces.

Long-lasting renewable antibacterial porous polymeric coatings enable titanium biomaterials to prevent and treat peri-implant infection

Peri-implant infection is one of the biggest threats to the success of dental implant. Existing coatings on titanium surfaces exhibit rapid decrease in antibacterial efficacy, which is difficult to promisingly prevent peri-implant infection. Herein, we report an N-halamine polymeric coating on titanium surface that simultaneously has long-lasting renewable antibacterial efficacy with good stability and biocompatibility. Our coating is powerfully biocidal against both main pathogenic bacteria of peri-implant infection and complex bacteria from peri-implantitis patients. More importantly, its antibacterial efficacy can persist for a long term (e.g., 12~16 weeks) in vitro, in animal model, and even in human oral cavity, which generally covers the whole formation process of osseointegrated interface. Furthermore, after consumption, it can regain its antibacterial ability by facile rechlorination, highlighting a valuable concept of renewable antibacterial coating in dental implant. These findings indicate an appealing application prospect for prevention and treatment of peri-implant infection.

New trends in the development of multifunctional peptides to functionalize biomaterials

Improving cell-material interactions is a major goal in tissue engineering. In this regard, functionalization of biomaterials with cell instructive molecules from the extracellular matrix stands out as a powerful strategy to enhance their bioactivity and achieve optimal tissue integration. However, current functionalization strategies, like the use of native full-length proteins, are associated with drawbacks, thus urging the need of developing new methodologies. In this regard, the use of synthetic peptides encompassing specific bioactive regions of proteins represents a promising alternative. In particular, the combination of peptide sequences with complementary or synergistic effects makes it possible to address more than one biological target at the biomaterial surface. In this review, an overview of the main strategies using peptides to install multifunctionality on biomaterials is presented, mostly focusing on the combination of the RGD motif with other peptides sequences. The evolution of these approaches, starting from simple methods, like using peptide mixtures, to more advanced systems of peptide presentation, with very well defined chemical properties, are explained. For each system of peptide's presentation, three main aspects of multifunctionality-improving receptor selectivity, mimicking the extracellular matrix and preventing bacterial colonization while improving cell adhesion-are highlighted.

Antimicrobial and enzyme-responsive multi-peptide surfaces for bone-anchored devices

Functionalization of dental and orthopedic implants with multiple bioactivities is desirable to obtain surfaces with improved biological performance and reduced infection rates. While many approaches have been explored to date, nearly all functionalized surfaces are static, i.e., non-responsive to biological cues. However, tissue remodeling necessary for implant integration features an ever-changing milieu of cells that demands a responsive biomaterial surface for temporal synchronization of interactions between biomaterial and tissue. Here, we successfully synthesized a multi-functional, dynamic coating on titanium by co-immobilizing GL13K antimicrobial peptide and an MMP-9 - a matrix metalloproteinase secreted by bone-remodeling osteoclasts - responsive peptide. Our co-immobilized peptide surface showed potent anti-biofilm activity, enabled effective osteoblast and fibroblast proliferation, and demonstrated stability against a mechanical challenge. Finally, we showed peptide release was triggered for up to seven days when the multi-peptide coatings were cultured with MMP-9-secreting osteoclasts. Our MMP-9 cleavable peptide can be conjugated with osteogenic or immunomodulatory motifs for enhanced bone formation in future work. Overall, we envisage our multifunctional, dynamic surface to reduce infection rates of percutaneous bone-anchored devices via strong anti-microbial activity and enhanced tissue regeneration via temporal synchronization between biomaterial cues and tissue responses.

A microporous surface containing Si3N4/Ta microparticles of PEKK exhibits both antibacterial and osteogenic activity for inducing cellular response and improving osseointegration

As an implantable biomaterial, polyetherketoneketone (PEKK) exhibits good mechanical strength but it is biologically inert while tantalum (Ta) possesses outstanding osteogenic bioactivity but has a high density and elastic modulus. Also, silicon nitride (SN) has osteogenic and antibacterial activity. In this study, a microporous surface containing both SN and Ta microparticles on PEKK (STP) exhibiting excellent osteogenic and antibacterial activity was created by sulfonation. Compared with sulfonated PEKK (SPK) without microparticles, the surface properties (roughness, surface energy, hydrophilicity and protein adsorption) of STP significantly increased due to the SN and Ta particles presence on the microporous surface. In addition, STP also exhibited outstanding antibacterial activity, which inhibited bacterial growth in vitro and prevented bacterial infection in vivo because of the presence of SN particles. Moreover, the microporous surface of STP containing both SN and Ta particles remarkably induced response (e.g., proliferation and differentiation) of rat bone mesenchymal stem (rBMS) cells in vitro. Furthermore, STP significantly improved new bone regeneration and osseointegration in vivo. Regarding the induction of cellular response in vitro and improvement of osseointegration in vivo, the microporous surface containing Ta was better than the surface with SN particles. In conclusion, STP with optimized surface properties activated cellular responses in vitro, enhanced osseointegration and prevented infection in vivo. Therefore, STP possessed the dual biofunctions of excellent osteogenic and antibacterial activity, showing great potential as a bone substitute.

•Microporous surface containing SN/Ta microparticles on PEKK (STP) was created.

•Surface performances (e.g., roughness) of STP were significantly increased.

•STP exhibited antibacterial activity in vitro and prevented infection in vivo.

•STP remarkably induced response of bone mesenchymal stem cells in vitro.

•STP obviously improved bone regeneration and osseointegration in vivo.

A peptide-based coating toolbox to enable click chemistry on polymers, metals, and silicon through sortagging

A versatile peptide-based toolbox for surface functionalization was established by a combination of a universal material binding peptide (LCI-anchor peptide) and sortase-mediated bioconjugation (sortagging). This toolbox facilitates surface functionalization either as a one- or a two-step strategy. In the case of the one-step strategy, the desired functionality was directly introduced to LCI. For the two-step strategy, LCI was modified with a reactive group, which can be further functionalized (e.g., employing "click" chemistry). Sortagging of LCI, employing sortase A from Staphylococcus aureus, was achieved with six different amine compounds: dibenzocyclooctyne amine, biotin-polyethylene glycol amine, Cyanine-3 amine, kanamycin, methoxypolyethylene glycol amine (Mn = 5000 Da), and 2,2,3,3,4,4,4-Heptafluorobutylamine. The purification of LCI-amine sortagging products was performed by a negative purification using Strep-tag II affinity chromatography, resulting in LCI-amine conjugates with purities >90%. For the two-step strategy, the LCI-dibenzocyclooctyne sortagging product was purified and enabled, through copper-free azide-alkyne "click" chemistry, universal surface functionalization of material surfaces such as polypropylene, polyethylene terephthalate, stainless steel, gold, and silicon. The click reaction was performed before or after surface binding of LCI-dibenzocyclooctyne. Finally, in the case of the one-step strategy, polypropylene was directly functionalized with Cyanine-3 and biotin-polyethylene glycol amine.

New developments in anti-biofilm intervention towards effective management of orthopedic device related infections (ODRI's)

Orthopedic device related infections (ODRI's) represent a difficult to treat situation owing to their biofilm based nature. Biofilm infections once established are difficult to eradicate even with an aggressive treatment regimen due to their recalcitrance towards antibiotics and immune attack. The involvement of antibiotic resistant pathogens as the etiological agent further worsens the overall clinical picture, pressing on the need to look into alternative treatment strategies. The present review highlightes the microbiological challenges associated with treatment of ODRI's due to biofilm formation on the implant surface. Further, it details the newer anti-infective modalities that work either by preventing biofilm formation and/or through effective disruption of the mature biofilms formed on the medical implant. The study, therefore aims to provide a comprehensive insight into the newer anti-biofilm interventions (non-antibiotic approaches) and a better understanding of their mechanism of action essential for improved management of orthopedic implant infections.

Strategies for antimicrobial peptide coatings on medical devices: a review and regulatory science perspective

Indwelling and implanted medical devices are subject to contamination by microbial pathogens during surgery, insertion or injection, and ongoing use, often resulting in severe nosocomial infections. Antimicrobial peptides (AMPs) offer a promising alternative to conventional antibiotics to reduce the incidence of such infections, as they exhibit broad-spectrum antimicrobial activity against Gram-negative and Gram-positive bacteria, microbial biofilms, fungi, and viruses. In this review-perspective, we first provide an overview of the progress made in this field over the past decade with an emphasis on the local release of AMPs from implant surfaces and immobilization strategies for incorporating these agents into a wide range of medical device materials. We then provide a regulatory science perspective addressing the characterization and testing of AMP coatings based on the type of immobilization strategy used with a focus on the US market regulatory niche. Our goal is to help narrow the gulf between academic studies and preclinical testing, as well as to support a future literature base in order to develop the regulatory science of antimicrobial coatings.

Harnessing biomolecules for bioinspired dental biomaterials

Dental clinicians have relied for centuries on traditional dental materials (polymers, ceramics, metals, and composites) to restore oral health and function to patients. Clinical outcomes for many crucial dental therapies remain poor despite many decades of intense research on these materials. Recent attention has been paid to biomolecules as a chassis for engineered preventive, restorative, and regenerative approaches in dentistry. Indeed, biomolecules represent a uniquely versatile and precise tool to enable the design and development of bioinspired multifunctional dental materials to spur advancements in dentistry. In this review, we survey the range of biomolecules that have been used across dental biomaterials. Our particular focus is on the key biological activity imparted by each biomolecule toward prevention of dental and oral diseases as well as restoration of oral health. Additional emphasis is placed on the structure-function relationships between biomolecules and their biological activity, the unique challenges of each clinical condition, limitations of conventional therapies, and the advantages of each class of biomolecule for said challenge. Biomaterials for bone regeneration are not reviewed as numerous existing reviews on the topic have been recently published. We conclude our narrative review with an outlook on the future of biomolecules in dental biomaterials and potential avenues of innovation for biomaterial-based patient oral care.

Surface Immobilization Chemistry of a Laminin-Derived Peptide Affects Keratinocyte Activity

Many chemical routes have been proposed to immobilize peptides on biomedical device surfaces, and in particular, on dental implants to prevent peri-implantitis. While a number of factors affect peptide immobilization quality, an easily controllable factor is the chemistry used to immobilize peptides. These factors affect peptide chemoselectivity, orientation, etc., and ultimately control biological activity. Using many different physical and chemical routes for peptide coatings, previous research has intensely focused on immobilizing antimicrobial elements on dental implants to reduce infection rates. Alternatively, our strategy here is different and focused on promoting formation of a long-lasting biological seal between the soft tissue and the implant surface through transmembrane, cell adhesion structures called hemidesmosomes. For that purpose, we used a laminin-derived call adhesion peptide. However, the effect of different immobilization chemistries on cell adhesion peptide activity is vastly unexplored but likely critical. Here, we compared the physiochemical properties and biological responses of a hemidesmosome promoting peptide immobilized using silanization and copper-free click chemistry as a model system for cell adhesion peptides. Successful immobilization was confirmed with water contact angle and X-ray photoelectron spectroscopy. Peptide coatings were retained through 73 days of incubation in artificial saliva. Interestingly, the non-chemoselective immobilization route, silanization, resulted in significantly higher proliferation and hemidesmosome formation in oral keratinocytes compared to chemoselective click chemistry. Our results highlight that the most effective immobilization chemistry for optimal peptide activity is dependent on the specific system (substrate/peptide/cell/biological activity) under study. Overall, a better understanding of the effects immobilization chemistries have on cell adhesion peptide activity may lead to more efficacious coatings for biomedical devices.

Antimicrobial Peptide-Polymer Conjugates for Dentistry

Bacterial adhesion and growth at the composite/adhesive/tooth interface remain the primary cause of dental composite restoration failure. Early colonizers, including Streptococcus mutans, play a critical role in the formation of dental caries by creating an environment that reduces the adhesive's integrity. Subsequently, other bacterial species, biofilm formation, and lactic acid from S. mutans demineralize the adjoining tooth. Because of their broad spectrum of antibacterial activity and low risk for antibiotic resistance, antimicrobial peptides (AMPs) have received significant attention to prevent bacterial biofilms. Harnessing the potential of AMPs is still very limited in dentistry-a few studies have explored peptide-enabled antimicrobial adhesive copolymer systems using mainly nonspecific adsorption. In the current investigation, to avoid limitations from nonspecific adsorption and to prevent potential peptide leakage out of the resin, we conjugated an AMP with a commonly used monomer for dental adhesive formulation. To tailor the flexibility between the peptide and the resin material, we designed two different spacer domains. The spacer-integrated antimicrobial peptides were conjugated to methacrylate (MA), and the resulting MA-AMP monomers were next copolymerized into dental adhesives as AMP-polymer conjugates. The resulting bioactivity of the polymethacrylate-based AMP conjugated matrix activity was investigated. The antimicrobial peptide conjugated to the resin matrix demonstrated significant antimicrobial activity against S. mutans. Secondary structure analyses of conjugated peptides were applied to understand the activity differential. When mechanical properties of the adhesive system were investigated with respect to AMP and cross-linking concentration, resulting AMP-polymer conjugates maintained higher compressive moduli compared to hydrogel analogues including polyHEMA. Overall, our result provides a robust approach to develop a fine-tuned bioenabled peptide adhesive system with improved mechanical properties and antimicrobial activity. The results of this study represent a critical step toward the development of peptide-conjugated dentin adhesives for treatment of secondary caries and the enhanced durability of dental composite restorations.

Dual-Peptide-Functionalized Nanofibrous Scaffolds Recruit Host Endothelial Progenitor Cells for Vasculogenesis to Repair Calvarial Defects

Vasculogenesis (de novo formation of vessels) induced by endothelial progenitor cells (EPCs) is requisite for vascularized bone regeneration. However, there exist few available options for promoting vasculogenesis within artificial bone grafts except for exogenous EPC transplantation, which suffers from the source of EPC, safety, cost, and time concerns in clinical applications. This study aimed at endogenous EPC recruitment for vascularized bone regeneration by using a bioinspired EPC-induced graft. The EPC-induced graft was created by immobilizing two bioactive peptides, WKYMVm and YIGSR, on the surface of poly(ε-caprolactone) (PCL)/poliglecaprone (PGC) nanofibrous scaffolds via a polyglycolic acid (PGA)-binding peptide sequence. Remarkable immobilization efficacy of WKYMVm and YIGSR peptides and their sustained release (over 14 days) from scaffolds were observed. In vivo and in vitro studies showed robust recruitment of EPCs, which subsequently contributed to early vasculogenesis and ultimate bone regeneration. The dual-peptide-functionalized nanofibrous scaffolds proposed in this study provide a promising therapeutic strategy for vasculogenesis in bone defect repair.

Auto-cleaning functionalization of the polyvinylidene fluoride membrane by the biocidal oxine/TiO2 nanocomposite for anti-biofouling properties

The commercial polyvinylidene fluoride (PVDF) polymer was modified with TiO₂ nanoparticle-doped oxine to develop an auto-cleaning functionalized hybrid membrane with a long lasting antibiofilm effect.

Nisin infusion into surface cracks in oxide coatings to create an antibacterial metallic surface

The efficacy of surface topology and chemistry on the ability for a surface to retain antimicrobial performance via the immobilization of a peptide was evaluated. A nanosecond pulsed laser was used to create oxide films on Ti-6Al-4V and 304L stainless steel. The laser conditions employed created a mudflat cracked surface on titanium, but no cracks on the steel. An antimicrobial peptide, nisin, was infused into the cracked and uncracked oxide surfaces to provide antimicrobial activity against Gram-positive bacteria; Listeria monocytogenes was chosen as the model microorganism. Release tests in distilled water at room temperature show that nisin is slowly liberated from the uncracked stainless steel surface, while there was no evidence of nisin liberation from the cracked titanium alloy surfaces, likely due to immobilization of the peptide into the artificially created micro-cracks on the surface of this alloy. Surfaces treated with nisin became active and exhibit anti-microbial performance against L. monocytogenes; this behavior is mostly retained after scrubbing/washing and simple immersion in water.

Application of a Strontium-Loaded, Phase-Transited Lysozyme Coating to a Titanium Surface to Enhance Osteogenesis and Osteoimmunomodulation

Background

To fabricate strontium (Sr)-incorporated titanium (Ti) surfaces by a novel 1-step phase-transited lysozyme (PTL) treatment, and investigate the effects of the prepared samples on osteogenesis and osteoimmunoregulation.

Material/Methods

Five groups of titanium specimens were prepared, including Ti, PTL, PTL@10Sr (PTL coating with 10 mg/mL Sr), PTL@20Sr PTL coating with 20 mg/mL Sr), and PTL@50Sr (PTL coating with 50 mg/mL Sr) groups. Behaviors of bone marrow mesenchymal stem cells (BMSCs) such as initial attachment, spread, proliferation, and migration, on different surfaces were examined by immunofluorescence, MTS assay, and Transwell system. Then the osteogenic differentiation of BMSCs was detected. When an immune response was factored in, the polarization of macrophages induced by the prepared surfaces was detected by real-time PCR, and the response of BMSCs to macrophage-conditioned medium was assessed in terms of cell migration and osteogenic differentiation. Finally, an in vivo study was performed, using the rat femora implant model, to evaluate the potential for osteogenic induction and osteoimmunoregulation of materials.

Results

Our in vitro experiments indicated that PTL coating could improve cell spread and adhesion, and the stable Sr release of PTL@Sr layers could promote cell migration and osteogenesis. Moreover, PTL@Sr surface could regulate the immune response of macrophages resulting in enhanced BMSCs recruitment and osteogenic differentiation. The in vivo evaluation showed less inflammatory infiltration and improved bone formation in the PTL@20Sr group.

Conclusions

The Sr-loaded PTL layers have greater potential for the induction of osteogenic differentiation of BMSCs, meanwhile Sr-loaded PTL layers could adjust the immune response and thus promote osteogenesis both in vitro and in vivo.

Peptide Mediated Antimicrobial Dental Adhesive System

The most common cause for dental composite failures is secondary caries due to invasive bacterial colonization of the adhesive/dentin (a/d) interface. Innate material weakness often lead to an insufficient seal between the adhesive and dentin. Consequently, bacterial by-products invade the porous a/d interface leading to material degradation and dental caries. Current approaches to achieve antibacterial properties in these materials continue to raise concerns regarding hypersensitivity and antibiotic resistance. Herein, we have developed a multi-faceted, bio-functionalized approach to overcome the vulnerability of such interfaces. An antimicrobial adhesive formulation was designed using a combination of antimicrobial peptide and a ε-polylysine resin system. Effector molecules boasting innate immunity are brought together with a biopolymer offering a two-fold biomimetic design approach. The selection of ε-polylysine was inspired due to its non-toxic nature and common use as food preservative. Biomolecular characterization and functional activity of our engineered dental adhesive formulation were assessed and the combinatorial formulation demonstrated significant antimicrobial activity against Streptococcus mutans. Our antimicrobial peptide-hydrophilic adhesive hybrid system design offers advanced, biofunctional properties at the critical a/d interface.

Rational design of a zwitterionic–phosphonic copolymer for the surface antifouling modification of multiple biomedical metals

The relationship between the composition of the copolymer and the antifouling ability conferred to the metallic substrates has been established.

The antibacterial effect of potassium-sodium niobate ceramics based on controlling piezoelectric properties

The implant infection is one of the most serious postsurgical complications of medical device implantation. Therefore, the development of biocompatible materials with improved antibacterial properties is of great importance. It might be a new insight to apply the intrinsic electrical properties of biomaterials to solve this problem. Here, potassium-sodium niobate piezoceramics (K_0.5Na_0.5NbO₃, KNN) with different piezoelectric constants were prepared, and the microstructures and piezoelectric properties of these piezoceramics were evaluated. Moreover, the antibacterial effect and biocompatibility of these piezoceramics were assayed. Results showed that these piezoceramics were able to decrease the colonies of bacteria staphylococcus aureus (S. aureus), favor the rat bone marrow mesenchymal stem cells (rBMSCs) proliferation and promote the cell adhesion and spreading. The above effects were found closely related to the surface positive charges of the piezoceramics, and the sample bearing the most positive charges on its surface (sample 80KNN) had the best performance in both antibacterial effect and biocompatibility. Based on our work, it is feasible to develop biocompatible antibacterial materials by controlling piezoelectric properties.

Tailor-Made Functional Peptide Self-Assembling Nanostructures

Noncovalent interactions are the main driving force in the folding of proteins into a 3D functional structure. Motivated by the wish to reveal the mechanisms of the associated self-assembly processes, scientists are focusing on studying self-assembly processes of short protein segments (peptides). While this research has led to major advances in the understanding of biological and pathological process, only in recent years has the applicative potential of the resulting self-assembled peptide assemblies started to be explored. Here, major advances in the development of biomimetic supramolecular peptide assemblies as coatings, gels, and as electroactive materials, are highlighted. The guiding lines for the design of helical peptides, β strand peptides, as well as surface binding monolayer-forming peptides that can be utilized for a specific function are highlighted. Examples of their applications in diverse immerging applications in, e.g., ecology, biomedicine, and electronics, are described. Taking into account that, in addition to extraordinary design flexibility, these materials are naturally biocompatible and ecologically friendly, and their production is cost effective, the emergence of devices incorporating these biomimetic materials in the market is envisioned in the near future.

Self-assembling antimicrobial peptides on nanotubular titanium surfaces coated with calcium phosphate for local therapy

Bacterial infection is a serious medical problem leading to implant failure. The current antibiotic based therapies rise concerns due to bacterial resistance. The family of antimicrobial peptides (AMP) is one of the promising candidates as local therapy agents due to their broad-spectrum activity. Despite AMPs receive increasing attention to treat infection, their effective delivery to the implantation site has been limited. Here, we developed an engineered dual functional peptide which delivers AMP as a biomolecular therapeutic agent onto calcium phosphate (Ca-P) deposited nanotubular titanium surfaces. Dual functionality of the peptide was achieved by combining a hydroxyapatite binding peptide-1 (HABP1) with an AMP using a flexible linker. HABP functionality of the peptide provided a self-coating property onto the nano-topographies that are designed to improve osteointegration capability, while AMP offered an antimicrobial protection onto the implant surface. We successfully deposited calcium phosphate minerals on nanotubular titanium oxide surface using pulse electrochemical deposition (PECD) and characterized the minerals by XRD, FT-IR, FE-SEM. Antimicrobial activity of the engineered peptide was tested against S. mutans (gram- positive) and E. coli (gram-negative) both in solution and on the Ca-P coated nanotubular titanium surface. In solution activity of AMP and dual functional peptide have the same Minimum Inhibitory Concentration (MIC) (32 mg/mL). The peptide also resulted in the reduction of the number of bacteria both for E.coli and S. mutans compare to control groups on the surface. Antimicrobial features of dual functional peptides are strongly correlated with their structures suggesting tunability in design through linkers regions. The dual-function peptide offers single-step solution for implant surface functionalization that could be applicable to any implant surface having different topographies.

Antibiofilm Peptides and Peptidomimetics with Focus on Surface Immobilization

Bacterial biofilms pose a major threat to public health, as they are associated with at least two thirds of all infections. They are highly resilient and render conventional antibiotics inefficient. As a part of the innate immune system, antimicrobial peptides have drawn attention within the last decades, as some of them are able to eradicate biofilms at sub-minimum inhibitory concentration (MIC) levels. However, peptides possess a number of disadvantages, such as susceptibility to proteolytic degradation, pH and/or salinity-dependent activity and loss of activity due to binding to serum proteins. Hence, proteolytically stable peptidomimetics were designed to overcome these drawbacks. This paper summarizes the current peptide and peptidomimetic strategies for combating bacteria-associated biofilm infections, both in respect to soluble and surface-functionalized solutions.

Antimicrobial Metallopeptides

Antimicrobial peptides are short amphipathic peptides that are produced by the innate immune system in order to protect a host from pathogens. They have been shown to have broad-spectrum antimicrobial activity toward Gram-positive and Gram-negative bacteria, as well as antifungal, antiprotozoan, and antiviral activity. These peptides are able to exert their activity through a variety of mechanisms that include inhibiting DNA and RNA replication, inhibiting protein synthesis, permeabilizing the cell membrane, disrupting proton and ion transmembrane gradients, and inhibiting cell wall biosynthesis. Certain antimicrobial peptides are able to utilize metals to modulate their activity through structural changes upon metal binding, metal sequestration, and redox chemistry. This work aims to provide a review of the current literature regarding the influence of metals on the activity of antimicrobial metallopeptides and their uses in drug delivery and the treatment of implant-associated infections.