Hydroxyl-Exchanged Nanoporous Ionic Copolymer toward Low-Temperature Cycloaddition of Atmospheric Carbon Dioxide into Carbonates

Facile construction of heterogeneous dual-ionic poly(ionic liquid)s for efficient and mild conversion of CO2 into cyclic carbonates

In the context of peaking carbon dioxide emissions and carbon neutrality, development of feasible methods for converting CO2 into high value-added chemicals stands out as a hot subject. In this study, P[D+COO-][Br-][DBUH+], a series of novel heterogeneous dual-ionic poly(ionic liquid)s (PILs) were synthesized readily from 2-(dimethylamino) ethyl methacrylate (DMAEMA), bromo-substituted aliphatic acids, organic bases and divinylbenzene (DVB). The structures, compositions and morphologies were characterized or determined by nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), infrared spectroscopy (IR), scanning electron microscopes (SEM), and Brunauer-Emmett-Teller analysis (BET), etc. Application of the P[D+COO-][Br-][DBUH+] series as catalysts in converting CO2 into cyclic carbonates showed that P[D+COO-][Br-][DBUH+]-2/1/0.6 was able to catalyze epiclorohydrin-CO2 cycloaddition the most efficiently. This afforded chloropropylene carbonate (CPC) in 98.4% yield with ≥ 99% selectivity in 24 hr under solvent- and additive-free conditions at atmospheric pressure. Reusability experiments showed that recycling of the catalyst 6 times only resulted in a slight decline in the catalytic performance. In addition, it could be used for the synthesis of a variety of differently substituted cyclic carbonates in good to excellent yields. Finally, key catalytic active sites were probed, and a reasonable mechanism was proposed accordingly. In summary, this work poses an efficient strategy for heterogenization of dual-ionic PILs and provides a mild and environmentally benign approach to the fixation and utilization of carbon dioxide.

A Binary Silicon-Centered Organoboron Catalyst with Superior Performance to That of Its Bifunctional Analogue

This work reported that a silicon-centered alkyl borane/ammonium salt binary (two-component) catalyst exhibits much higher activity than its bifunctional analogue (one-component) for the ring-opening polymerization of propylene oxide, showing 7.3 times the activity of its bifunctional analogue at a low catalyst loading of 0.01 mol %, and even 15.3 times the activity at an extremely low loading of 0.002 mol %. By using 19 F NMR spectroscopy, control experiments, and theoretical calculation we discovered that the central silicon atom displays appropriate electron density and a larger intramolecular cavity, which is useful to co-activate the monomer and to deliver propagating chains, thus leading to a better intramolecular synergic effect than its bifunctional analogue. A unique two-pathway initiation mode was proposed to explain the unusual high activity of the binary catalytic system. This study breaks the traditional impression of the binary Lewis acid/nucleophilic catalyst with poor activity because of the increase in entropy.

Diamide-linked imidazolyl Poly(dicationic ionic liquid)s for the conversion of CO2 to cyclic carbonates under ambient pressure

The ionic active centers and hydrogen-bond donors (HBDs) in heterogeneous catalytic materials are highly beneficial for enhancing the interaction between solid-liquid-gas three-phase interfaces and promoting effective fixation of carbon dioxide (CO2). Diamide-linked imidazolyl poly(dicationic ionic liquid)s catalysts PIMDILs (PMAIL-x and PBAIL-2) were synthesized through the copolymerization of diamide-linked imidazolyl dicationic ionic liquids (IMDILs) with divinylbenzene (DVB), which successfully enable the simultaneous construction of high-density and uniformly distributed ionic active centers (2.014-4.883 mmol g-1) and hydrogen-bond donors (HBDs). The as-synthesized PIMDILs present excellent catalytic activity in promoting the cycloaddition of CO2 with epoxides. PMAIL-2 could convert epichlorohydrin (ECH) with a quantitative conversion of 99.8 % (selectivity > 99 %) under ambient pressure. Furthermore, only a decrease in activity of 5 % was observed even after six cycles of recycling. The excellent conversions (>97.3 %) were achieved for various terminal substituted epoxides. The experimental and characterization results reveal that the high-density ionic active centers and amide HBDs can effectively activate the reaction substrates, their synergistic effect plays a crucial role at the catalyst interface. This work is expected to provide some useful insights for the rational construction of heterogeneous catalysts for CO2 conversion.

Organocatalytic Polymers from Affordable and Readily Available Building Blocks for the Cycloaddition of CO2 to Epoxides

The catalytic cycloaddition of CO₂ to epoxides to afford cyclic carbonates as useful monomers, intermediates, solvents, and additives is a continuously growing field of investigation as a way to carry out the atom-economic conversion of CO₂ to value-added products. Metal-free organocatalytic compounds are attractive systems among various catalysts for such transformations because they are inexpensive, nontoxic, and readily available. Herein, we highlight and discuss key advances in the development of polymer-based organocatalytic materials that match these requirements of affordability and availability by considering their synthetic routes, the monomers, and the supports employed. The discussion is organized according to the number (monofunctional versus bifunctional materials) and type of catalytically active moieties, including both halide-based and halide-free systems. Two general synthetic approaches are identified based on the postsynthetic functionalization of polymeric supports or the copolymerization of monomers bearing catalytically active moieties. After a review of the material syntheses and catalytic activities, the chemical and structural features affecting catalytic performance are discussed. Based on such analysis, some strategies for the future design of affordable and readily available polymer-based organocatalysts with enhanced catalytic activity under mild conditions are considered.

Functionalized β-Cyclodextrins Catalyzed Environment-Friendly Cycloaddition of Carbon Dioxide and Epoxides

Ammonium, imidazole, or pyridinium functionalized β-cyclodextrins (β-CDs) were used as efficient one-component bifunctional catalysts for the coupling reaction of carbon dioxide (CO₂) and epoxide without the addition of solvent and metal. The influence of different catalysts and reaction parameters on the catalytic performance were examined in detail. Under optimal conditions, Im-CD1-I catalysts functionalized with imidazole groups were able to convert various epoxides into target products with high selectivity and good conversion rates. The one-component bifunctional catalysts can also be recovered easily by filtration and reused at least for five times with only slight decrease in catalytic performance. Finally, a possible process for hydroxyl group-assisted ring-opening of epoxide and functionalized group- induced activation of CO₂ was presented.

Immobilization of Ionic Liquid on a Covalent Organic Framework for Effectively Catalyzing Cycloaddition of CO2 to Epoxides

Transforming CO2 into value-added chemicals has been an important subject in recent years. The development of a novel heterogeneous catalyst for highly effective CO2 conversion still remains a great challenge. As an emerging class of porous organic polymers, covalent organic frameworks (COFs) have exhibited superior potential as catalysts for various chemical reactions, due to their unique structure and properties. In this study, a layered two-dimensional (2D) COF, IM4F-Py-COF, was prepared through a three-component condensation reaction. Benzimidazole moiety, as an ionic liquid precursor, was integrated onto the skeleton of the COF using a benzimidazole-containing building unit. Ionization of the benzimidazole framework was then achieved through quaternization with 1-bromobutane to produce an ionic liquid-immobilized COF, i.e., BMIM4F-Py-COF. The resulting ionic COF shows excellent catalytic activity in promoting the chemical fixation of CO2 via reaction with epoxides under solvent-free and co-catalyst-free conditions. High porosity, the one-dimensional (1D) open-channel structure of the COF and the high catalytic activity of ionic liquid may contribute to the excellent catalytic performance. Moreover, the COF catalyst could be reused at least five times without significant loss of its catalytic activity.

Facile Construction of Carboxyl-Functionalized Ionic Polymer towards Synergistic Catalytic Cycloaddition of Carbon Dioxide into Cyclic Carbonates

The development of bifunctional ionic polymers as heterogeneous catalysts for effective, cocatalyst- and metal-free cycloaddition of carbon dioxide into cyclic carbonates has attracted increasing attention. However, facile fabrication of such polymers having high numbers of ionic active sites, suitable types of hydrogen bond donors (HBDs), and controlled spatial positions of dual active sites remains a challenging task. Herein, imidazolium-based ionic polymers with hydroxyl/carboxyl groups and high ionic density were facilely prepared by a one-pot quaternization reaction. Catalytic evaluation demonstrated that the presence of HBDs (hydroxyl or carboxyl) could enhance the catalytic activities of ionic polymers significantly toward the CO₂ cycloaddition reaction. Among the prepared catalysts, carboxyl-functionalized ionic polymer (PIMBr-COOH) displayed the highest catalytic activity (94% yield) in the benchmark cycloaddition reaction of CO₂ and epichlorohydrin, which was higher than hydroxyl-functionalized ionic polymer (PIMBr-OH, 76% yield), and far exceeded ionic polymer without HBDs groups (PIMBr, 54% yield). Furthermore, PIMBr-COOH demonstrated good recyclability and wide substrate tolerance. Under ambient CO₂ pressure, a number of epoxides were smoothly cycloadded into cyclic carbonates. Additionally, density functional theory (DFT) calculation verified the formation of strong hydrogen bonds between epoxide and the HBDs of ionic polymers. Furthermore, a possible mechanism was proposed based on the synergistic effect between carboxyl and Br⁻ functionalities. Thus, a facile, one-pot synthetic strategy for the construction of bifunctional ionic polymers was developed for CO₂ fixation.

Functional Porous Ionic Polymers as Efficient Heterogeneous Catalysts for the Chemical Fixation of CO2 under Mild Conditions

The development of efficient and metal-free heterogeneous catalysts for the chemical fixation of CO2 into value-added products is still a challenge. Herein, we reported two kinds of polar group (-COOH, -OH)-functionalized porous ionic polymers (PIPs) that were constructed from the corresponding phosphonium salt monomers (v-PBC and v-PBH) using a solvothermal radical polymerization method. The resulting PIPs (POP-PBC and POP-PBH) can be used as efficient bifunctional heterogeneous catalysts in the cycloaddition reaction of CO2 with epoxides under relatively low temperature, ambient pressure, and metal-free conditions without any additives. It was found that the catalytic activities of the POP-PBC and POP-PBH were comparable with the homogeneous catalysts of Me-PBC and PBH and were higher than that of the POP-PPh3-COOH that was synthesized through a post-modification method, indicating the importance of the high concentration catalytic active sites in the heterogeneous catalysts. Reaction under low CO2 concentration conditions showed that the activity of the POP-PBC (with a conversion of 53.8% and a selectivity of 99.0%) was higher than that of the POP-PBH (with a conversion of 32.3% and a selectivity of 99.0%), verifying the promoting effect of the polar group (-COOH group) in the porous framework. The POP-PBC can also be recycled at least five times without a significant loss of catalytic activity, indicating the high stability and robustness of the PIPs-based heterogeneous catalysts.

Hypercrosslinked Ionic Polymers with High Ionic Content for Efficient Conversion of Carbon Dioxide into Cyclic Carbonates

The effective conversion of carbon dioxide (CO2) into cyclic carbonates requires porous materials with high ionic content and large specific surface area. Herein, we developed a new systematic post-synthetic modification strategy for synthesizing imidazolium-based hypercrosslinked ionic polymers (HIPs) with high ionic content (up to 2.1 mmol g−1) and large specific surface area (385 m2 g−1) from porous hypercrosslinked polymers (HCPs) through addition reaction and quaternization. The obtained HIPs were efficient in CO2 capture and conversion. Under the synergistic effect of high ionic content, large specific surface area, and plentiful micro/mesoporosity, the metal-free catalyst [HCP-CH2-Im][Cl]-1 exhibited quantitative selectivities, high catalytic yields, and good substrate compatibility for the conversion of CO2 into cyclic carbonates at atmospheric pressure (0.1 MPa) in a shorter reaction time in the absence of cocatalysts, solvents, and additives. High catalytic yields (styrene oxide, 120 °C, 8 h, 94% yield; 100 °C, 20 h, 93% yield) can be achieved by appropriately extending the reaction times at low temperature, and the reaction times are shorter than other porous materials under the same conditions. This work provides a new strategy for synthesizing an efficient metal-free heterogeneous catalyst with high ionic content and a large specific surface area from HCPs for the conversion of CO2 into cyclic carbonates. It also demonstrates that the ionic content and specific surface area must be coordinated to obtain high catalytic activity for CO2 cycloaddition reaction.

Amine-catalyzed site- and stereo-selective coupling of epoxy amines and carbon dioxide to construct oxazolidinones

NEt3 catalyzed the cycloaddition of epoxy amine and CO2, which generated oxazolidinones. Reactions of chiral epoxy amine achieved 100% configuration inversion, enabling the synthesis of linezolid. DFT studies show that NEt3 acted as a nucleophile.

Polyamine-functionalized imidazolyl poly(ionic liquid)s for the efficient conversion of CO2 into cyclic carbonates

The synergistic effect of polyamine groups and nucleophile (Br−) significantly improved the catalytic performance of N4-PIL-2, which can convert epoxides into cyclic carbonates with excellent yields and selectivity under ambient pressure.

Different functional groups modified porous organic polymers used for low concentration CO2 fixation

Through a facile post-synthetic method, different kinds of polar group-functionalized ionic liquid porous organic polymers (POP-PA-COOH, POP-PA-OH, and POP-PA-NH₂) were obtained. The materials can be used as efficient heterogeneous catalysts in the cycloaddition reaction of CO₂ with epoxides under mild and co-catalyst-free conditions. It is demonstrated that POP-PA-NH₂ possesses much higher catalytic activity than POP-PA-OH and POP-PA-COOH. Interestingly, this activity difference can further be amplified when the reaction is carried out under low CO₂ concentration, and POP-PA-NH₂ possesses a conversion of 84.7% with a selectivity of 99.0% in 96 h. It is noteworthy to mention that research focusing on the transformation of CO₂ under low concentration using heterogeneous catalysts is rare and still a challenge. The excellent activities of POP-PA-NH₂ under low CO₂ concentration make this material a good candidate for CO₂ elimination under mild conditions.

Molecular engineering in a family of pillared-layered metal-organic frameworks for tuning gas adsorption behavior

In this work, inspired by a water-assisted three-dimensional supramolecular structure 1, we use a mixed-ligand strategy to form a 3D pillared-layered matrix by the introduction of linear ligands to compete against the water molecules. The resulting analogue microporous MOFs of 2-H, 2-F and 2-N, decorated with different functional groups, similarly show the CO2 uptake. Thanks to the negligible N2 adsorption capacity, enhanced selective adsorption towards CO2 is achieved in compound 2-N. That is, we present here an alternative plan for the high CO2 selective adsorption performance. In addition, the structure stability and moderate affinity for CO2 of these microporous MOFs endow them with excellent reusability.

Tris-imidazolinium-based porous poly(ionic liquid)s as an efficient catalyst for decarboxylation of cyclic carbonate to epoxide

A series of imidazolinium-based porous poly(ionic liquid)s (PILs) with different anions prepared by free-radical copolymerization of an arene-bridged tris-vinylimidazolium salt and divinylbenzene (DVB) were constructed. The as-prepared PILs were characterized by BET, SEM, TEM, TGA and Elemental Analysis (EA), and the results showed that they had plentiful ionic sites, and abundant and stable mesopores. In particular, the density of ionic sites and pore structure of PILs could be controlled by adjusting the content of DVB. Moreover, the PILs were used as efficient heterogeneous catalysts for the decarboxylation of cyclic carbonates to epoxides for the first time. Results showed that the catalytic activity of PILs was positively correlated with the nucleophilicity of the anions in PILs, and PDVB-[PhTVIM]Cl-1 with a chloride anion-enriched skeleton displayed the best catalytic performance. Without any solvent or cocatalyst, PDVB-[PhTVIM]Cl-1 achieved a TOF value of 108.1 h-1 and the yield of butylene oxide of 89.6%, which was even better than the homogeneous IL-based catalysts (TOF value: 8.7 h-1) that had been previously reported. Meanwhile, PDVB-[PhTVIM]Cl-1 also exhibited excellent recyclability and substrate compatibility.

A quinoxaline-based porous organic polymer containing copper nanoparticles CuNPs@Q-POP as a robust nanocatalyst toward C-N coupling reaction

A novel porous organic polymer (denoted by Q-POP) was successfully fabricated by free-radical copolymerization of allyl-substituted 2,3-di(2-hydroxyphenyl)1,2-dihydroquinoxaline, and divinylbenzene under solvothermal conditions and used as a new platform for immobilization of copper nanoparticles. The CuNPs@Q-POP nanocatalyst was prepared via incorporating of Cu(NO3)2 into the polymeric network, followed by the reduction of Cu2+ ion with hydrazine hydrate. The obtained materials were characterized through FT-IR, XRD, N2 adsorption-desorption isotherms, ICP, TGA, SEM, HR-TEM, EDX, and the single-crystal X-ray crystallography. The results displayed that Q-POP and CuNPs@Q-POP possessed high surface area, hierarchical porosity, and excellent thermal and chemical stability. The as-synthesized catalyst was utilized for the Ullmann C-N coupling reaction of aromatic amines and different aryl halides to prepare various diarylamine derivatives. All types of aryl halides (except aryl fluorides) were screened in the Ullmann C-N coupling reaction with aromatic amines to produce diaryl amines in good to excellent yields (50-98%), and it turned out that aryl iodides have the best results. Besides, due to the strong interactions between CuNPs, N, and O-atoms of quinoxaline moiety existing in the polymeric framework, the copper leaching from the support was not observed. Furthermore, the catalyst was recycled and reused for five consecutive runs without significant activity loss.

A new multi-functional Cu(ii)-organic framework as a platform for selective carbon dioxide chemical fixation and separation of organic dyes

A new multi-functional metal–organic framework {[Cu2(HL)(H2O)2]·NMP·2H2O}n was synthesized. It shows efficient catalytic performance for the chemical fixation of CO2 and exhibits selective sorption towards the rhodamine B dye.

Hydroxy acid-functionalized ionic liquids as green alternatives for the efficient catalytic conversion of epoxides to cyclic carbonates under solvent and co-catalyst-free conditions

Environmentally friendly synthesis route of carbonates from CO2 and epoxides catalysed by novel hydroxy acid ionic liquids under metal/halogen/cocatalyst/solvent-free conditions.

Protic ionic liquids tailored by different cationic structures for efficient chemical fixation of diluted and waste CO2 into cyclic carbonates

Environment-friendly approaches to directly convert atmospheric or flue gas CO₂ to high-value chemicals is of great significance yet challenging.

Recent Advances on Imidazolium-Functionalized Organic Cationic Polymers for CO2 Adsorption and Simultaneous Conversion into Cyclic Carbonates

The cycloaddition reaction of CO₂ with various epoxides to generate cyclic carbonates is one of the most promising and efficient approaches for CO₂ fixation. Typical imidazolium-based ionic liquids possessing electrophilic cations and nucleophilic halogen anions have been identified as excellent and environmentally friendly candidates for synergistically activating epoxides to convert CO₂ . Therefore, the feasible construction of a series of imidazolium-functionalized organic cationic polymers can bridge the gap between homogeneous and heterogeneous catalysis, thereby obtaining highly selective CO₂ adsorption and simultaneous conversion ability. This Review describes the recent advancements made with regard to the design and synthesis of this type of polymeric networks having imidazolium functionality. They are considered as an outstanding heterogeneous catalyst for the cycloaddition of CO₂ to epoxides. Based on the perspective from the design of building blocks to the synthesis of cationic polymers, the focus mainly lies on how to introduce imidazole units into the material backbone via a covalent linking approach and how to incorporate other active sites capable of activating CO₂ and/or epoxides into such polymeric materials.

Imidazolium-Functionalized Ionic Hypercrosslinked Porous Polymers for Efficient Synthesis of Cyclic Carbonates from Simulated Flue Gas

The rapid growth of CO₂ emissions, especially from power plants, has led to the urgent need to directly capture and fix CO₂ in the flue gas after simple purification rather than energy-intensive gas separation. Herein, imidazolium-functionalized ionic hypercrosslinked porous polymers (HCPs) bearing adjustable surface groups were straightforwardly synthesized through co-hypercrosslinking of benzylimidazole salts and crosslinker through Friedel-Crafts alkylation. Abundant microporosity and relatively high ionic moieties were obtainable in the ethyl-group-tethered ionic HCP, giving a remarkably selective CO₂ capture performance with a CO₂ uptake of 3.05 mmol g^-1 and an ideal adsorbed solution theory (IAST) CO₂ /N₂ selectivity as high as 363 (273 K, 1 bar). This ionic polymer demonstrated high efficiency in the synthesis of cyclic carbonates from the coupling of various epoxides with the simulated flue gas (15 % CO₂ and 85 % N₂ ), giving high yields, large turnover numbers (up to 4800), and stable reusability under additive- and solvent-free conditions.

Ionic-Liquid-Modified Click-Based Porous Organic Polymers for Controlling Capture and Catalytic Conversion of CO2

Capture and catalytic conversion of CO₂ into value-added chemicals is a promising and sustainable approach to relieve global warming and the energy crisis. Nitrogen-rich porous organic polymers (POPs) are promising materials for CO₂ capture and separation, but their application in the additive-free catalytic conversion of CO₂ into cyclic carbonates is still a challenge. Herein, a nitrogen-rich click-based POP (CPP) was developed for the cycloaddition reaction of CO₂ with epoxides in the absence of metal, solvents, and additives. The introduction of imidazolium-based ionic liquids on the CPP host backbone could modulate the porosity, CO₂ adsorption/desorption, CO₂ selectivity over N₂ , and catalytic activity in the chemical transformation. A tentative catalytic pathway was proposed to account for the superior catalytic activity of the catalytic systems, in which the incorporated ionic liquid and porous properties of CPP synergistically contributed to the catalytic reaction. This study provides a platform to understand the cooperative effects of porous properties and nucleophilic anions on the cycloaddition reaction of CO₂ with epoxides.

Cobalt-Salen-Based Porous Ionic Polymer: The Role of Valence on Cooperative Conversion of CO2 to Cyclic Carbonate

Cobalt-salen-based porous ionic polymers, which are composed of cobalt and halogen anions decorated on the framework, effectively catalyze the CO₂ cycloaddition reaction of epoxides to cyclic carbonates under ambient conditions. The cooperative effect of bifunctional active sites of cobalt as the Lewis acidic site and the halogen anion as the nucleophile responds to the high catalytic performance. Moreover, density functional theory results indicate that the cobalt valence state and the corresponding coordination group influence the rate-determining step of the CO₂ cycloaddition reaction and the nucleophilicity of halogen anions.

Facile Incorporation of Au Nanoparticles into an Unusual Twofold Entangled Zn(II)-MOF with Nanocages for Highly Efficient CO2 Fixation under Mild Conditions

Herein, a new porous Zn(II)-based metal-organic framework (MOF 1) has been prepared, the structure of which featured a twofold entangled motif based on two typical secondary building units (SBUs). The gas sorption studies indicated that MOF 1 may be explored as a useful platform to encapsulate metallic nanoparticles. Then the Au@1 composite has been prepared via a facile incorporation method without extra reducing agents. The Au@1 composite has been fully characterized by HRTEM, SEM-EDX, PXRD, gas sorption, XPS, ICP, etc. Catalytic experiments showed that the Au@1 composite had a perfect catalytic performance in CO₂ fixation for epoxides with different substituents under mild conditions.

Novel Cobalt Complex as an Efficient Catalyst for Converting CO2 into Cyclic Carbonates under Mild Conditions

Based on the ligand H2dpPzda (1), a novel cobalt complex [Co(H2dpPzda)(NCS)2]·CH3OH(2) has been synthesized and characterized. The Complex 2 exhibited excellent catalytic performance for converting CO2 into cyclic carbonates under mild conditions. For propylene oxide (PO) and CO2 synthesis of propylene carbonate (PC), the catalytic system showed a remarkable TOF as high as 29,200 h−1. The catalytic system also showed broad substrate scope of epoxide. Additionally, the catalyst could be recycled to maintain the integrity of the structure and remained equal to the level of its catalytic activity even after seven catalytic rounds. Additionally, a possible catalytic mechanism was proposed due to the high catalytic activity which might be owing to the synergism of Lewis acidic metal centers and N group.

Straightforward synthesis of MTW-type magnesium silicalite for CO2 fixation with epoxides under mild conditions

Mg-Si-ZSM-12 was hydrothermally synthesized and effective for CO₂ fixation under mild conditions.