Calixarene Assisted Rapid Synthesis of Silver-Graphene Nanocomposites with Enhanced Antibacterial Activity

p-Sulfonatocalix[6]arene-Functionalized Gold Nanoparticles: Applications in Drug Delivery and Bioimaging

Surface-functionalized noble metal nanoparticles with macrocyclic hosts have attracted enormous research interest owing to their applications in drug delivery, catalysis, bioimaging, etc. Stable p-sulfonatocalix[6]arene-functionalized gold nanoparticles (SCx6AuNPs) of the sizes ∼7.5 nm have been synthesized and characterized by using UV-vis absorption, transmission electron microscopy, and surface-enhanced Raman spectroscopy measurements. The efficient uptake and stimuli-responsive release of doxorubicin (Dox), an anticancer drug, by the SCx6AuNPs have been established for targeted drug delivery application. The decreased cytotoxicity of Dox loaded on SCx6AuNPs, especially toward normal cell lines, and its multistimuli responsive release validated in both cancerous (A549) and normal (W126) cell lines find promising for selectively targeted drug delivery applications toward cancer cells. At the cellular level, this study also establishes the efficient uptake of the SCx6AuNP nanoconjugates, and its validation has been done by bioimaging measurement by using thioflavin T (ThT) dye loaded on to SCx6AuNPs instead of Dox as the fluorescent tracking probe. The bright fluorescence microscopic image of ThT-SCx6AuNP-stained cancerous cell lines corroborates the uptake of SCx6AuNPs by the cell lines and its projected utility for drug delivery and bioimaging applications.

Binding of single/double stranded ct-DNA with graphene oxide‑silver nanocomposites in vitro: A multispectroscopic approach

The fundamental binding of single-stranded (ssDNA) and double-stranded DNA (dsDNA) with graphene oxide-Ag nanocomposites (GO-AgNCPs) has been systematically investigated by multi spectroscopic methods, i.e. ultraviolet-visible (UV-vis) absorption, fluorescence spectroscopy, and circular dichroism (CD). The experimental and theoretical results demonstrate that both ssDNA and dsDNA can be adsorbed onto the GO-AgNCPs surface. All of the evidence indicated that there were relatively strong binding of ssDNA/dsDNA with GO-AgNCPs. The article compares the differences in binding between the two types of DNA and the nanomaterials using spectroscopic and thermodynamic data. UV-vis absorption spectroscopy experiments indicate that the characteristic absorbance intensity of both ss DNA and ds DNA increases, but the rate of change in absorbance is different. The fluorescence results revealed that ss/dsDNA could interact with the GO-AgNCPs surface, in spite of the different binding affinities. The Ka value of ssDNA binding with GO-AgNCPs is greater than that of dsDNA at each constant temperature, indicating that the affinity of dsDNA toward GO-AgNCPs is comparatively weak. Molecular docking studies have corroborated the mentioned experimental results. The calculated thermodynamic parameters showed that the binding process was thermodynamically spontaneous, van der Waals force and hydrogen bonding played predominant roles in the binding process. The mechanism of ss/ds DNA binding with GO-AgNCPs was also investigated, and the results indicated that GO-AgNCPs directly binds to the minor groove of ss/ds DNA by replacing minor groove binders.

Bactericidal Effect and Cytotoxicity of Graphene Oxide/Silver Nanocomposites

To tackle the proliferation of pathogenic microorganisms without relying on antibiotics, innovative materials boasting antimicrobial properties have been engineered. This study focuses on the development of graphene oxide/silver (GO/Ag) nanocomposites, derived from partially reduced graphene oxide adorned with silver nanoparticles. Various nanocomposites with different amounts of silver (GO/Ag-1, GO/Ag-2, GO/Ag-3, and GO/Ag-4) were synthesized, and their antibacterial efficacy was systematically studied. The silver nanoparticles were uniformly deposited on the partially reduced graphene oxide surface, exhibiting spherical morphologies with an average size of 25 nm. The nanocomposites displayed potent antibacterial properties against both gram-positive bacteria (S. aureus and B. subtilis) and gram-negative bacteria (E. coli and S. enterica) as confirmed by minimum inhibition concentration (MIC) studies and time-dependent experiments. The optimal MIC for Gram-positive bacteria was 62.5 μg/mL and for Gram-negative bacteria was 125 μg/mL for the GO/Ag nanocomposites. Bacterial cells that encountered the nanocomposite films exhibited significantly greater inhibitory effects compared to those exposed to conventional antibacterial materials. Furthermore, the cytotoxicity of these nanocomposites was assessed using human epithelial cells (HEC), revealing that GO/Ag-1 and GO/Ag-2 exhibited lower toxicity levels toward HEC and remained compatible even at higher dilution rates. This study underscores the potential of GO/Ag-based nanocomposites as versatile materials for antibacterial applications, particularly as biocompatible wound dressings, offering promising prospects for wound healing and infection control.

The future of plant based green carbon dots as cancer Nanomedicine: From current progress to future Perspectives and beyond

BACKGROUND

The emergence of carbon dots (CDs) as anticancer agents had sparked a transformation in cancer research and treatment strategies. These fluorescent CDs, initially introduced in the early 2000 s, possess exceptional biocompatibility, tunable fluorescence, and surface modification capabilities, positioning them as promising tools in biomedical applications.

AIM OF REVIEW

The review encapsulates the transformative trajectory of green CDs as future anticancer nanomedicine, poised to redefine the strategies employed in the ongoing fight against cancer.

KEY SCIENTIFIC CONCEPTS OF REVIEW

The versatility of CDs was rooted in their various synthesis approaches and sustainable strategies, enabling their adaptability for diverse therapeutic uses. In vitro studies had showcased CDs' selective cytotoxicity against cancer cells while sparing healthy counterparts, forming the basis for targeted therapeutic potential. This selectivity had been attributed to the reactive oxygen species (ROS) generation, which opened avenues for targeted interventions. The role of CDs in combination therapies, synergizing with chemotherapy, radiotherapy, and targeted approaches was then investigated to heighten their anticancer efficacy. Notably, in vivo studies highlight CDs' remarkable biocompatibility and minimal side effects, endorsing their translational promise. Integration with conventional cancer treatments such as chemotherapy, radiotherapy, and immunotherapy amplified the versatility and effectiveness of CDs. The exploration of CDs' applications in photo-induced treatments further solidified their significance, positioning them as photosensitizers (PS) in photodynamic therapy (PDT) and photothermal agents (PA) in photothermal therapy (PTT). In PDT, CDs triggered the generation of ROS upon light exposure, facilitating cancer cell elimination, while in PTT, they induced localized hyperthermia within cancer cells, enhancing therapeutic outcomes. In vitro and in vivo investigations validated CDs' efficacy in PDT and PTT, affirming their potential for integration into combination therapies. Looking ahead, the future of CDs in anticancer treatment encompasses bioavailability, biocompatibility, synergistic treatments, tumor targeting, artificial intelligence (AI) and robotics integration, personalized medicine, and clinical translation. This transformative odyssey of CDs as future anticancer agents is poised to redefine the paradigm of cancer treatment strategies.

Electrospun Ag-decorated reduced GO-graft-chitosan composite nanofibers with visible light photocatalytic activity for antibacterial performance

The treatment of water contaminated by bacteria is becoming a necessity. The nanomaterials possessing both intrinsic antibacterial properties and photocatalytic activity are excellent candidates for water disinfection. The powdered form of nanomaterials can be aggregated while embedding the nanomaterials into the NFs can overcome the limitation and enhance the photocatalytic activity and transition from UV-light to visiblelight. Here, graphene oxide (GO) was synthesized, grafted to chitosan, and decorated with silver nanoparticles (Ag NPs) to produce Ag-decorated reduced GO-graft-Chitosan (AGC) NPs. The blends of polyacrylonitrile (PAN) and AGC NPs were prepared in various concentrations of 0.5 wt%, 1.0 wt%, 5.0 wt%, and 10.0 wt% and used to fabricate the electrospun composite NFs. FTIR/ATR, UV-Vis, Raman, XRD, and SEM/EDAX analyses confirmed the successful preparation of the NPs and NFs. The cytotoxicity and antibacterial activity of the composite NFs were received in the order of composite NFs 10.0 wt%˃ 5.0 wt%˃ 1.0 wt%˃ 0.5 wt% in both conditions with/without light irradiation. Their cytotoxicity and antibacterial activity were more under light irradiation compared to the dark. The composite NFs (5.0 wt%) were distinguished as the optimum NFs with cell viability of 80% within 24 h and 60% within 48 h on L929 cells and inhibition zone diameter (IZD) of 12 mm for E. coli and 13 mm for S. aureus after 24 h under the light irradiation. The optimum composite NFs showed thermal stability up to 180 °C and tensile strength of 1.11 MPa with 21.71% elongation at break.

Restoration of antibacterial activity of inactive antibiotics via combined treatment with a cyanographene/Ag nanohybrid

The number of antibiotic-resistant bacterial strains is increasing due to the excessive and inappropriate use of antibiotics, which are therefore becoming ineffective. Here, we report an effective way of enhancing and restoring the antibacterial activity of inactive antibiotics by applying them together with a cyanographene/Ag nanohybrid, a nanomaterial that is applied for the first time for restoring the antibacterial activity of antibiotics. The cyanographene/Ag nanohybrid was synthesized by chemical reduction of a precursor material in which silver cations are coordinated on a cyanographene sheet. The antibacterial efficiency of the combined treatment was evaluated by determining fractional inhibitory concentrations (FIC) for antibiotics with different modes of action (gentamicin, ceftazidime, ciprofloxacin, and colistin) against the strains Escherichia coli, Pseudomonas aeruginosa, and Enterobacter kobei with different resistance mechanisms. Synergistic and partial synergistic effects against multiresistant strains were demonstrated for all of these antibiotics except ciprofloxacin, which exhibited an additive effect. The lowest average FICs equal to 0.29 and 0.39 were obtained for colistin against E. kobei and for gentamicin against E. coli, respectively. More importantly, we have experimentally confirmed for the first time, that interaction between the antibiotic's mode of action and the mechanism of bacterial resistance strongly influenced the combined treatment’s efficacy.

Phenylboronic acid-functionalized silver nanoparticles for highly efficient and selective bacterial killing

With the widespread use of antibiotics, the number of severe infections caused by unknown pathogens is increasing and novel antibacterial agents with high antibacterial efficiency and selective bacterial killing are urgently needed. In this work, we developed a new kind of functional material based on silver nanoparticles (AgNPs), whose surfaces were functionalized with phenylboronic acid (AgNPs-PBA_n). The phenylboronic acid groups on the surface of AgNPs-PBA_n could form covalent bonds with the cis-diol groups of lipopolysaccharide or teichoic acid on the bacterial surface, which highly promoted the interaction between AgNPs-PBA_n and bacteria, resulting in a very strong enhancement of their antibacterial action via membrane disruption. The scanning electron microscopy images revealed that the accumulation of phenylboronic acid-functionalized AgNPs on the bacterial surface is much more than that of the nonfunctionalized AgNPs. Importantly, the antibacterial efficiency of the phenylboronic acid-functionalized AgNPs on a series of bacteria is 32 times higher than that of bare AgNPs. Moreover, AgNPs-PBA_n showed a high selectivity toward bacteria with an IC₅₀ (half maximal inhibitory concentration to mammalian cells) more than 160 times its MBC (minimum bactericidal concentration). In a model of an E. coli-infected wound in vivo, AgNPs-PBA_n could effectively kill the bacteria with an accelerated wound healing rate. This study demonstrates that phenylboronic acid surface functionalization is an efficient way to drastically promote the antibacterial activity of AgNPs, improving the selectivity of silver-based nanoparticles against a variety of bacteria.

All Ag Nanoparticles Are Not the Same: Covalent Interactions between Ag Nanoparticles and Nitrile Groups Help Combat Drug- and Ag-Resistant Bacteria

Antimicrobial resistance has long been viewed as a lethal threat to global health. Despite the availability of a wide range of antibacterial medicines all around the world, organisms have evolved a resistance mechanism to these therapies. As a result, a scenario has emerged requiring the development of effective antibacterial drugs/agents. In this article, we exclusively highlight a significant finding reported by Zbořil and associates (Adv. Sci. 2021, 2003090). The authors construct a covalently bounded silver-cyanographene (GCN/Ag) with the antibacterial activity of 30 fold higher than that of free Ag ions or typical Ag nanoparticles (AgNPs). Ascribed to the strong covalent bond between nitrile and Ag, an immense cytocompatibility is shown by the GCN/Ag towards healthy human cells with a minute leaching of Ag ions. Firm interactions between the microbial membrane and the GCN/Ag are confirmed by molecular dynamics simulations, which rule out the dependence of antibacterial activity upon the Ag ions alone. Thus, this study furnishes ample scope to unfold next-generation hybrid antimicrobial drugs to confront infections arising from drug and Ag-resistant bacterial strains.

Alternatives to Conventional Antibiotic Therapy: Potential Therapeutic Strategies of Combating Antimicrobial-Resistance and Biofilm-Related Infections

Antibiotics have been denoted as the orthodox therapeutic agents for fighting bacteria-related infections in clinical practices for decades. Nevertheless, overuse of antibiotics has led to the upsurge of species with antimicrobial resistance (AMR) or multi-drug resistance. Bacteria can also grow into the biofilm, which accounts for at least two-thirds of infections. Distinct gene expression and self-produced heterogeneous hydrated extracellular polymeric substance matrix architecture of biofilm contribute to their tolerance and externally manifest as antibiotic resistance. In this review, the difficulties in combating biofilm formation and AMR are introduced, and novel alternatives to antibiotics such as metal nanoparticles and quaternary ammonium compounds, chitosan and its derivatives, antimicrobial peptides, stimuli-responsive materials, phage therapy and other therapeutic strategies, from compounds to hydrogel, from inorganic to biological, are discussed. We expect to provide useful information for the readers who are seeking for solutions to the problem of AMR and biofilm-related infections.

Silver Covalently Bound to Cyanographene Overcomes Bacterial Resistance to Silver Nanoparticles and Antibiotics

The ability of bacteria to develop resistance to antibiotics is threatening one of the pillars of modern medicine. It was recently understood that bacteria can develop resistance even to silver nanoparticles by starting to produce flagellin, a protein which induces their aggregation and deactivation. This study shows that silver covalently bound to cyanographene (GCN/Ag) kills silver-nanoparticle-resistant bacteria at concentrations 30 times lower than silver nanoparticles, a challenge which has been so far unmet. Tested also against multidrug resistant strains, the antibacterial activity of GCN/Ag is systematically found as potent as that of free ionic silver or 10 nm colloidal silver nanoparticles. Owing to the strong and multiple dative bonds between the nitrile groups of cyanographene and silver, as theory and experiments confirm, there is marginal silver ion leaching, even after six months of storage, and thus very high cytocompatibility to human cells. Molecular dynamics simulations suggest strong interaction of GCN/Ag with the bacterial membrane, and as corroborated by experiments, the antibacterial activity does not rely on the release of silver nanoparticles or ions. Endowed with these properties, GCN/Ag shows that rigid supports selectively and densely functionalized with potent silver-binding ligands, such as cyanographene, may open new avenues against microbial resistance.

N-methylene phosphonic acid chitosan/graphene sheets decorated with silver nanoparticles as green antimicrobial agents

A green and scalable approach for the preparation of few-layered graphene utilizing the biowaste of potato peels has been developed. The potato peels have been dried and carbonized to obtain a new graphite structure that has been exfoliated in N-methylene phosphonic acid chitosan (MPC). The exfoliation process assisted the formation of graphene sheets with a high size diameter and quality of 50% based on the weight of graphite structure. The graphene sheets were green decorated with silver nanoparticles using microwave power to obtain new nanocomposites. The mass ratio between the graphite and silver nitrate was optimized and observed to change the morphology and size diameter of silver nanoparticles. The as-prepared MPC structure, graphene, and silver decorated graphene nanocomposites were characterized using ¹HNMR, FTIR, XRD, UV/Vis spectrophotometer, SEM, and TEM besides tested as antimicrobial agents. The bacterial performance was also controlled by changing the number of AgNPs distributed on graphene sheets based on the mass ratios of graphite/AgNO₃. The inhibition diameter of silver decorated graphene was considerably increased to 24.8, and 20.1 mm as in the case of MPC-GRP-Ag30 composite compared to the pure graphene (11.2, 13.5 mm) for E. coli and S. aureus, consecutively proposing that the blade edge of graphene sheets can destroy the bacteria membrane and release silver cations promptly that are directed for the interaction with the cytoplasmic parts of the bacteria cell. Such findings offer green and biocompatible antibacterial agents based on the graphene derived from the biowaste products.

Nitrile-calixarene grafted magnetic graphene oxide for removal of arsenic from aqueous media: Isotherm, kinetic and thermodynamic studies

A novel adsorbent was developed based on nitrile functionalized calix [4]arene grafted onto magnetic graphene oxide (N-Calix-MGO) for remediation of arsenic (III) ions from aqueous media. The nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The effective parameters on adsorption efficiency such as pH, adsorbent dosage, contact time, initial concentration, and temperature were studied. The adsorption process was provided with a high removal efficiency up to (90%) at pH 6 which followed by IUPAC Type II pattern. The mathematical models of kinetics and isotherm validated the experimental process. The adsorption kinetic is followed pseudo-first-order model with R² > 0.9. The adsorption equilibrium was well fitted on the Freundlich model (R² ∼ 0.96) as compared Langmuir model (R² ∼ 0.75). Hence, the Freundlich model suggested a multilayer sorption pattern with a physisorption mechanism for arsenic (III) uptake ono developed nanocomposite with a sorption capacity of 67 mg/g for arsenic. The Gibbs free energy (ΔG° < -20 kJ/mol) showed As(III) uptake ono N-Calix-MGO nanocomposite was the physical adsorption mechanism.

Polyoxometalate-Ionic Liquids (ILs) and Polyvinyl Alcohol/Chitosan/ILs Hydrogels for Inhibiting Bacteria Colonising Wall Paintings

Historical monuments are increasingly being threatened by unexpected microbial colonizers, leading to their subsequent deterioration. Here, two tetraalkylphosphonium polyoxometalate ionic liquids (Q14-IL and Q16-IL) were successfully synthesized, which showed excellent antibacterial activity against four bacteria colonising wall paintings. Notably, Q14-IL exhibited superior antibacterial efficacy compared to longer alkyl Q16-IL. Additionally, polyvinyl alcohol/chitosan (PVA-CS) hydrogels containing two ILs were prepared, and the morphology, thermal stability, swelling ratio and antibacterial activity were systematically evaluated. The results suggest that higher CS content resulted in more uniform micropores and increased the swelling ratio. However, fewer antibacterial ILs were released and diffused over time from the matrix. Hydrogels with 5% CS content exhibited the highest antibacterial activity, which was mainly attributed to the synergetic antibacterial activity of positively charged ammonium (-NH₃⁺) groups of CS and quaternary phosphonium cation of ILs. This study may provide an alternative strategy for fighting against bacterial communities colonising ancient artworks.

Rapid synthesis and characterization of silver-loaded graphene oxide nanomaterials and their antibacterial applications

With the promising potential application of Ag/graphene-based nanomaterials in medicine and engineering materials, the large-scale production has attracted great interest of researchers on the basis of green synthesis. In this study, water-soluble silver/graphene oxide (Ag/GO) nanomaterials were synthesized under ultrasound-assisted conditions. The structural characteristics of Ag/GO were confirmed by Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, scanning electron microscopy and energy dispersion spectroscopy, respectively. The results showed the silver particles (AgNPs) obtained by reduction were attached to the surface of GO, and there was a strong interaction between AgNPs and GO. The antibacterial activity was primarily evaluated by the plate method and hole punching method. Antibacterial tests indicated that Ag/GO could inhibit the growth of Gram-negative and Gram-positive bacteria, special for the Staphylococcus aureus.

Graphene oxide-silver nanoparticle hybrid material: an integrated nanosafety study in zebrafish embryos

This work reports an integrated nanosafety study including the synthesis and characterization of the graphene oxide-silver nanoparticle hybrid material (GO-AgNPs) and its nano-ecotoxicity evaluation in the zebrafish embryo model. The influences of natural organic matter (NOM) and a chorion embryo membrane were considered in this study, looking towards more environmentally realistic scenarios and standardized nanotoxicity testing. The nanohybrid was successfully synthesized using the NaBH₄ aqueous method, and AgNPs (~ 5.8 nm) were evenly distributed over the GO surface. GO-AgNPs showed a dose-response acute toxicity: the LC₅₀ was 1.5 mg L^-1 for chorionated embryos. The removal of chorion, however, increased this toxic effect by 50%. Furthermore, the presence of NOM mitigated mortality, and LC₅₀ for GO-AgNPs changed respectively from 2.3 to 1.2 mg L^-1 for chorionated and de-chorionated embryos. Raman spectroscopy confirmed the ingestion of GO by embryos; but without displaying acute toxicity up to 100 mg L^-1, indicating that the silver drove toxicity down. Additionally, it was observed that silver nanoparticle dissolution has a minimal effect on these observed toxicity results. Finally, understanding the influence of chorion membranes and NOM is a critical step towards the standardization of testing for zebrafish embryo toxicity in safety assessments and regulatory issues.

Synthesis and molecular dynamics simulation of CuS@GO–CS hydrogel for enhanced photothermal antibacterial effect

CuS@GO–CS hydrogels were prepared by a simple method and possessed an enhanced photothermal antibacterial effect against E. coli and S. aureus.

Polymer-Based Graphene Derivatives and Microwave-Assisted Silver Nanoparticles Decoration as a Potential Antibacterial Agent

Nanocomposites obtained by the decoration of graphene-based materials with silver nanoparticles (AgNPs) have received increasing attention owing to their antimicrobial activity. However, the complex synthetic methods for their preparation have limited practical applications. This study aims to synthesize novel NanoHybrid Systems based on graphene, polymer, and AgNPs (namely, NanoHy-GPS) through an easy microwave irradiation approach free of reductants and surfactants. The polymer plays a crucial role, as it assures the coating layer/substrate compatibility making the platform easily adaptable for a specific substrate. AgNPs' loading (from 5% to 87%) can be tuned by the amount of Silver salt used during the microwave-assisted reaction, obtaining spherical AgNPs with average sizes of 5-12 nm homogeneously distributed on a polymer-graphene nanosystem. Interestingly, microwave irradiation partially restored the graphene sp2 network without damage of ester bonds. The structure, morphology, and chemical composition of NanoHy-GPS and its subunits were characterized by means of UV-vis spectroscopy, thermal analysis, differential light scattering (DLS), Field Emission Scanning Electron Microscopy (FE-SEM), Energy Dispersive X-ray analysis (EDX), Atomic Force Microscopy (AFM), and High-Resolution Transmission Electron Microscopy (HRTEM) techniques. A preliminary qualitative empirical assay against the typical bacterial load on common hand-contacted surfaces has been performed to assess the antibacterial properties of NanoHy-GPS, evidencing a significative reduction of bacterial colonies spreading.

Graphene oxide-silver nanocomposites embedded nanofiber core-spun yarns for durable antibacterial textiles

Antibacterial textiles, which effectively inhibit bacterial breeding and resist pathogenic diseases, have wide applications in medicine, hygiene, and related fields. However, traditional antibacterial textiles exhibit significant limitations, such as poor antibacterial durability and contamination during preparation. In this work, nanofiber yarn loaded with a high-efficiency antibacterial agent was prepared using electrospinning technology. Polyethyleneimine (PEI) was introduced as a solubilizing material to functionalize graphene oxide (GO) to form GO-PEI composites. A facile microwave heating method was used to synthesize GO-PEI and silver nanoparticles (AgNPs). A multi-needle conjugated electrospinning device was used to blend the nanofibers with the GO-PEI-Ag composite to form a nanofiber core-spun yarn. The antibacterial agent was firmly fixed on the fiber to prevent easy removal. A uniformly oriented yarn structure and internal morphology were observed, and the antibacterial activity of the fabric was measured. The antibacterial rate of the fabric was over 99.99%for both Escherichia coli and Staphylococcus aureus. After ten washes, the antibacterial rate remained above 99.99%. Thus, nanofiber fabric from electrospinning displays high antibacterial activity and excellent durability, thereby providing a feasible methodology for future production of antibacterial textiles.

Overview of the Synthesis and Structure of Calix[n]quinones (n=4, 6, 8)

Calix[n]quinones, a class of cyclic oligomers composed of p-benzoquinone structures connected by methylene, have multi-conjugated carbonyl structures and adjustable cavities, which make their synthesis extremely attractive. In this minireview, synthetic methods of calix[n]quinones and recent synthetic experience of our group are summarized. The merits and demerits of various synthetic methods are briefly reviewed as well. When synthesizing calix[n]quinone (n≥6) with a larger ring, the reduction-oxidation method is considered to be the most recommended.

Antibacterial activity of graphene oxide nanosheet against multidrug resistant superbugs isolated from infected patients

Graphene oxide (GO) is a derivative of graphene nanosheet which is the most promising material of the decade in biomedical research. In particular, it has been known as an antimicrobial nanomaterial with good biocompatibility. In this study, we have synthesized and characterize GO and checked its antimicrobial property against different Gram-negative and Gram-positive multidrug drug resistant (MDR) hospital superbugs grown in solid agar-based nutrient plates with and without human serum through the utilization of agar well diffusion method, live/dead fluorescent staining and genotoxicity analysis. No significant changes in antibacterial activity were found in these two different conditions. We also compare the bactericidal capability of GO with some commonly administered antibiotics and in all cases the degree of inhibition is found to be higher. The data presented here are novel and show that GO is an effective bactericidal agent against different superbugs and can be used as a future antibacterial agent.

Calix[n]arene/Pillar[n]arene-Functionalized Graphene Nanocomposites and Their Applications

Calix[n]arenes and pillar[n]arenes, which contain repeating units of phenol and methane, are class of synthetic cyclic supramolecules. Their rigid structure, tunable cavity size, flexible functionalization, and rich host-guest properties make them ideal surface modifiers to construct functional hybrid materials. Introduction of the calix[n]arene/pillar[n]arene species to the graphene may bring new interesting or enhanced physicochemical/biological properties by combining their individual characteristics. Reported methods for the surface modification of graphene with calix[n]arene/pillar[n]arene utilize either covalent or non-covalent approaches. This mini-review presents the recent advancements in the functionalization of graphene nanomaterials with calix[n]arene/pillar[n]arene and their applications. At the end, the future outlook and challenges for the continued research of calix[n]arene/pillar[n]arene-functionalized graphene nanohybrids in the development of applied nanoscience are thoroughly discussed.

Studies on binding of single-stranded DNA with reduced graphene oxide-silver nanocomposites

The binding reaction of reduced graphene oxide-silver nanocomposites (rGO-AgNCs) with calf thymus single-stranded DNA (ssDNA) was studied by ultraviolet-visible absorption, fluorescence spectroscopy and circular dichroism (CD), using berberine hemisulphate (BR) dye as a fluorescence probe. The absorbance of ssDNA increases, but the fluorescence intensity is quenched with the addition of rGO-AgNCs. The binding of rGO-AgNCs with ssDNA was able to increase the quenching effects of BR and ssDNA, and induce the changes in CD spectra. All of the evidence indicated that there was a relatively strong interaction between ssDNA and rGO-AgNCs. The data obtained from fluorescence experiments revealed that the quenching process of ssDNA caused by rGO-AgNCs is primarily due to complex formation, i.e. static quenching. The increasing trend of the binding equilibrium constant (Ka) with rising temperature indicated that the binding process was an endothermic reaction. The calculated thermodynamic parameters showed that the binding process was thermodynamically spontaneous, and hydrophobic association played predominant roles in the binding of ssDNA to the surface of rGO-AgNCs.

Chemical Functionalisation of 2D Materials by Batch and Continuous Hydrothermal Flow Synthesis

2D materials are single or few layered materials consisting of one or several elements with a thickness of a few nanometres. Their unique, tuneable physical and chemical properties including ease of chemical functionalisation makes this class of materials useful in a variety of technological applications. The feasibility of 2D materials strongly depends on better synthetic approaches to improve properties, increase performance, durability and reduce costs. As such, in the synthesis of nanomaterials, hydrothermal processes are widely adopted through a precursor-product synthesis route. This method includes batch or continuous flow systems, both employing water at elevated temperatures (above boiling point) and pressures to fine-tune the physical, chemical, optical and electronic properties of the nanomaterial. Both techniques yield particles with different morphology, size and surface area due to different mechanisms of particle formation. In this Minireview, we present batch and continuous hydrothermal flow synthesis of a selection of 2D derivatives (graphene, MXene and molybdenum disulfide), their chemical functionalisation as an advantageous approach in exploring properties of these materials as well as the benefits and challenges of employing these processes, and an outlook for further research.

Facile synthesis of rGO-MoS2-Ag nanocomposites with long-term antimicrobial activities

The abuse of antibiotics has led to the emergence of numerous super resistant bacteria, which pose a serious threat to public health. Developing nanomaterials with novel modes of bactericidal activity offers the promise of fighting pathogens without the risk of causing drug resistances. Here, we used reduced graphene oxide (rGO), bulk molybdenum disulfide (MoS₂) and silver nitrate (AgNO₃) to synthesize a ternary nanocomposite, rGO-MoS₂-Ag, via a simple one-pot method. The resulting rGO-MoS₂-Ag presented as crumpled and sheet-like structures decorated with Ag nanoparticles. The minimum inhibitory concentration and minimum bactericidal concentration of rGO-MoS₂-Ag against Escherichia coli were 50 and 100 μg ml^-1, while Staphylococcus aureus reacted only to twice higher concentrations of 100 and 200 μg ml^-1, respectively. Notably, rGO-MoS₂-Ag exhibited better antibacterial activity towards E. coli and S. aureus than rGO, MoS₂, or rGO-MoS₂. This result can be attributed to the excellent performance of rGO-MoS₂-Ag in destroying the bacterial cell membrane and inducing the generation of reactive oxygen species. The Ag⁺ ion release of rGO-MoS₂-Ag was delayed, endowing the nanocomposite with long-term antibacterial capabilities and better biosafety. Our results indicate that the as-prepared rGO-MoS₂-Ag has promising potential for application in biomedicine and public health.

PB@PDA@Ag nanosystem for synergistically eradicating MRSA and accelerating diabetic wound healing assisted with laser irradiation

The ever-growing threats of multidrug-resistant bacterial infection and chronic wound healing have created an imperative need for the development of novel antibacterial materials and therapeutic strategies, especially for diabetic patients infected with multidrug-resistant bacteria. In this work, the nanocomplexes named as PB@PDA@Ag were used for eradicating multidrug-resistant bacteria and accelerating wound healing of MRSA-infected diabetic model with the assistance of laser irradiation. In vitro results revealed that the combinational strategy exerted a synergistic effect for anti-MRSA through disrupting cell integrity, producing ROS, declining ATP, and oxidizing GSH, comparing with PB@PDA@Ag or NIR laser irradiation alone. Moreover, in vivo assay demonstrated that this system effectively accelerated MRSA-infected diabetic wound healing by mitigating local inflammatory response and up-regulating VEGF expression on the wound bed. Meanwhile, satisfactory biocompatibility and negligible damage to major organs were observed. Altogether, the aforementioned results indicate that the combinational therapy of PB@PDA@Ag and NIR irradiation shows a great potential application in the field of clinic infection.

The Role of Calix[n]arenes and Pillar[n]arenes in the Design of Silver Nanoparticles: Self-Assembly and Application

Silver nanoparticles (AgNPs) are an attractive alternative to plasmonic gold nanoparticles. The relative cheapness and redox stability determine the growing interest of researchers in obtaining selective plasmonic and electrochemical (bio)sensors based on silver nanoparticles. The controlled synthesis of metal nanoparticles of a defined morphology is a nontrivial task, important for such fields as biochemistry, catalysis, biosensors and microelectronics. Cyclophanes are well known for their great receptor properties and are of particular interest in the creation of metal nanoparticles due to a variety of cyclophane 3D structures and unique redox abilities. Silver ion-based supramolecular assemblies are attractive due to the possibility of reduction by “soft” reducing agents as well as being accessible precursors for silver nanoparticles of predefined morphology, which are promising for implementation in plasmonic sensors. For this purpose, the chemistry of cyclophanes offers a whole arsenal of approaches: exocyclic ion coordination, association, stabilization of the growth centers of metal nanoparticles, as well as in reduction of silver ions. Thus, this review presents the recent advances in the synthesis and stabilization of Ag (0) nanoparticles based on self-assembly of associates with Ag (I) ions with the participation of bulk platforms of cyclophanes (resorcin[4]arenes, (thia)calix[n]arenes, pillar[n]arenes).

Cooperative enhancement of antibacterial activity of sanguinarine drug through p-sulfonatocalix[6]arene functionalized silver nanoparticles

The amelioration of antibacterial efficacy along with the reduced minimum inhibitory concentration (MIC) of sanguinarine (SGR) drug have been demonstrated through the uptake of SGR by p-sulfonatocalix[6]arene functionalized silver nanoparticles. The large upward pKa shift and enhanced stability of SGR resulting from the favorable supra-nanomolecular strategy are deciphered into an improved antibacterial drug against different pathogenic micro-organisms including multi drug resistant bacteria.

Construction of biocompatible bovine serum albumin nanoparticles composed of nano graphene oxide and AIEgen for dual-mode phototherapy bacteriostatic and bacterial tracking

BACKGROUND

Efficient and highly controllable antibacterial effect, as well as good biocompatibility are required for antibacterial materials to overcome multi-drug resistance in bacteria. Herein, nano graphene oxide (NGO)-based near-infrared (NIR) photothermal antibacterial materials was schemed to complex with biocompatible bovine serum albumin (BSA) and aggregation-induced emission fluorogen (AIEgen) with daylight-stimulated ROS-producing property for dual-mode phototherapy in the treatment of antibiotic resistance bacteria.

RESULTS

Upon co-irradiation of daylight and NIR laser, NGO-BSA-AIE nanoparticles (NPs) showed superiorly antibacterial effect (more than 99%) both against amoxicillin (AMO)-resistant Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) by comparison with sing-model phototherapy. Meanwhile, the NGO-BSA-AIE NPs displayed prominent stability and excellently controllable biocompatibility. More importantly, under daylight irradiation, the AIEgen not only produced plentiful ROS for killing bacteria, but also presented fluorescence image for tracking bacteria.

CONCLUSIONS

Hence, the designed system provided tempting strategy of employing light as impetus for tracking bacterial distribution and photothermal/photodynamic synergistic treatment of antibiotic resistance antibacterial.

Graphene oxide-silver nanocomposites modulate biofilm formation and extracellular polymeric substance (EPS) production

Biofilms with positive and negative actions ubiquitously affect medical infections, environmental remediation and industrial processes. However, it remains challenging to control the growth of harmful biofilms as well as to exploit the use of beneficial biofilms. Here we investigated the effect of an antibacterial graphene oxide-silver nanoparticles (GO-AgNPs) composite on Pseudomonas aeruginosa biofilm formation. We found that GO-AgNPs prevented biofilm formation in a dose-dependent manner, with a threshold of 15 μg mL^-1. Interestingly, the bacterial biomass significantly decreased, but extracellular polymeric substance (EPS) production remarkably increased in mature biofilms treated with GO-AgNPs of an appropriate concentration, suggesting that GO-AgNPs effectively modulate biofilm development and structure. Moreover, we established that GO-AgNPs caused bacterial death via both physical damage and oxidative stress, showing the synergic action of GO and AgNPs. These findings facilitate the use of graphene-based nanocomposites for greener antibiotic applications.

MoS2@polydopamine-Ag nanosheets with enhanced antibacterial activity for effective treatment of Staphylococcus aureus biofilms and wound infection

Developing novel antibacterial agents to combat bacterial infection has been an everlasting task for scientists, due to the drug resistance evolved by bacteria during antibiotic treatment. In this work, we used polydopamine (PDA) to modify MoS2 nanosheets (MoS2 NSs) and then grew silver nanoparticles (AgNPs) on their surface to form MoS2@PDA-Ag nanosheets (MPA NSs) as multimodal antibacterial nanoagents to treat Staphylococcus aureus (S. aureus) biofilms and S. aureus infected wounds. In vitro results show that treatment with MPA NSs under near-infrared (NIR) laser irradiation can efficiently eradicate the established S. aureus biofilms with 99.99% of the bacteria inside biofilms killed, which shows significantly enhanced therapeutic efficacy compared with the MPA only group or the NIR laser irradiation only group. Remarkably, MPA NSs were also successfully used to treat S. aureus infected wounds in mice under NIR laser irradiation. In vivo experiments demonstrate that about 99% of bacteria in wounds were killed and the healing of the infected wounds was promoted. Overall, this work demonstrates that MPA NSs with enhanced antibacterial activity are promising nanoagents to treat S. aureus biofilms and S. aureus infected wounds.

Supramolecular Nanosystem Based on Pillararene-Capped CuS Nanoparticles for Targeted Chemo-Photothermal Therapy

A smart supramolecular nanosystem integrating targeting, chemotherapy, and photothermal therapy was constructed based on carboxylatopillar[5]arene (CP[5]A)-functionalized CuS nanoparticles (CuS@CP NPs). CuS@CP NPs with good monodispersibility and strong near-infrared absorption were synthesized in aqueous solution through a facile one-pot supramolecular capping method, followed by surface installation of a liver cancer-targeted galactose derivative through host-guest binding interaction. The resulting smart supramolecular nanosystem, namely, CuS@CPG, exhibited excellent photothermal ablation capability to HepG2 cells upon irradiation with laser at 808 nm. Chemotherapeutic drug, doxorubicin hydrochloride (DOX), was further loaded on CuS@CPG via electrostatic interactions between positively charged DOX and negatively charged CP[5]A to give CuS@CPG-DOX with a high drug-loading capacity up to 48.4%. The weakening of DOX-CP[5]A interactions in an acidic environment promoted the pH-responsive drug release from CuS@CPG-DOX. Significantly, this multifunctional supramolecular nanosystem showed a remarkably enhanced therapeutic effect through the combination of targeted chemotherapy and photothermal therapy upon in vitro cell study. Moreover, preliminary in vivo study demonstrated that CuS@CPG and CuS@CPG-DOX had good biocompatibility and excellent tumor inhibition effects upon near-infrared laser irradiation.

Highly Stable Graphene-Based Nanocomposite (GO-PEI-Ag) with Broad-Spectrum, Long-Term Antimicrobial Activity and Antibiofilm Effects

Various silver nanoparticle (AgNP)-decorated graphene oxide (GO) nanocomposites (GO-Ag) have received increasing attention owing to their antimicrobial activity and biocompatibility; however, their aggregation in physiological solutions and the generally complex synthesis methods warrant improvement. This study aimed to synthesize a polyethyleneimine (PEI)-modified and AgNP-decorated GO nanocomposite (GO-PEI-Ag) through a facile approach through microwave irradiation without any extra reductants and surfactants; its antimicrobial activity was investigated on Gram-negative/-positive bacteria (including drug-resistant bacteria) and fungi. Compared with GO-Ag, GO-PEI-Ag acquired excellent stability in physiological solutions and electropositivity, showing substantially higher antimicrobial efficacy. Moreover, GO-PEI-Ag exhibited particularly excellent long-term effects, presenting no obvious decline in antimicrobial activity after 1 week storage in physiological saline and repeated use for three times and the lasting inhibition of bacterial growth in nutrient-rich culture medium. In contrast, GO-Ag exhibited a >60% decline in antimicrobial activity after storage. Importantly, GO-PEI-Ag effectively eliminated adhered bacteria, thereby preventing biofilm formation. The primary antimicrobial mechanisms of GO-PEI-Ag were evidenced as physical damage to the pathogen structure, causing cytoplasmic leakage. Hence, stable GO-PEI-Ag with robust, long-term antimicrobial activity holds promise in combating public-health threats posed by drug-resistant bacteria and biofilms.

Mussel-Inspired Synthesis of NIR-Responsive and Biocompatible Ag-Graphene 2D Nanoagents for Versatile Bacterial Disinfections

Pathogenic bacterial infection has been becoming a global threat toward people's health, especially the massive usage of antibiotics due to the lack of antibacterial agents with less side effects. Developing new nanoagents to fight pathogenic bacteria has provided enormous new possibilities in the treatment of bacterial infections, such as graphene-based two-dimensional (2D) antibacterial nanoagents with different bacterial inhibition capabilities; however, mussel-inspired design of near-infrared (NIR)-responsive and biocompatible Ag-graphene nanoagents possessing efficient and versatile bacterial disinfection activities have rarely been reported. In this study, we developed a new kind of antibacterial nanoagent, dopamine-conjugated polysaccharide sulfate-anchored and -protected Ag-graphene (Ag@G-sodium alginate sulfate ((SAS)) nanocomposite, to combat bacterial infection and contamination in different application fields. Ag@G-SAS exhibited robust antibacterial activity toward both Escherichia coli and Staphylococcus aureus; notably, the nanoagent can significantly inhibit S. aureus infection on wounded pig skin without or with NIR laser. Besides wound disinfection, the 2D Ag@G-SAS can also serve as a good layer-by-layer (LbL) building block for the construction of self-sterilizing coatings on biomedical devices. All of the results verified that the LbL-assembled Ag@G-SAS coating exhibited favorable bactericidal activity, extraordinary blood compatibilities, and good promotion ability for cell proliferation. Owing to the shielding effects of heparin-like polysaccharide sulfates, the Ag@G-SAS nanoagent showed limited cytotoxicity toward mammalian cells. Combining all of the advantages mentioned above, it is believed that the proposed Ag@G-SAS nanoagent and its LbL-assembled coatings may have versatile application potentials to avoid bacterial contaminations in different fields, such as wounded skin, disinfection of biomedical implants and devices, and food packaging sterilization.

Synthesis of DNA-guided silver nanoparticles on a graphene oxide surface: enhancing the antibacterial effect and the wound healing activity

The occurrence of antibiotic resistance against pathogens is rapidly increasing and endangering the efficacy of antibiotics. Thus, finding a way to address this problem has become a major challenge due to the inability of conventional antibiotics to kill these multidrug-resistant bacteria. In order to further enhance the antibacterial ability and reduce the possibility of antibiotic resistance, we developed a simple two-step approach and synthesized a new nanocomposite by directly loading single-stranded DNA (ssDNA)-guided silver nanoparticles (AgNPs) on graphene oxide (ssDNA-AgNPs@GO). Through systematically evaluating the bactericidal activity and wound healing capability, we found that ssDNA-AgNPs@GO exhibited synergistic antibacterial activity against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Bacillus subtilis with low minimum inhibitory concentrations (6.8 μg mL⁻¹, 6.8 μg mL⁻¹, 11.9 μg mL⁻¹ and 10.2 μg mL⁻¹, respectively) and large-diameter inhibition zones (12.83 ± 0.63 mm, 13.14 ± 0.37 mm, 8.6 ± 0.9 mm and 8.93 ± 0.47 mm, respectively). Furthermore, the wound healing experiment indicated that it has a striking ability to remedy wound infection caused by Staphylococcus aureus bacteria. In conclusion, the properties of ssDNA-AgNPs@GO with enhanced antibacterial and wound healing capability will give it broad applications in the future.

A simple two-step approach to synthesize a new nanocomposite by directly loading single-stranded DNA (ssDNA)-guided silver nanoparticles (AgNPs) on graphene oxide (ssDNA-AgNPs@GO) is developed.

Synthesis of silver nanoparticle-decorated hydroxyapatite (HA@Ag) poriferous nanocomposites and the study of their antibacterial activities

Herein, we demonstrate a facile and green rapid approach for the synthesis of uniform poriferous hydroxylapatite [Ca₁₀(PO₄)₆(OH)₂, HA] and poriferous silver nanoparticle (Ag NPs)-decorated hydroxylapatite (HA@Ag) nanocomposites with excellent antibacterial properties. All the nanocomposites were fully characterized in the solid state via various techniques such as X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), automatic specific surface area and porosity analysis (BET) and field emission scanning electron microscopy (FESEM). The results show that HA has a porous rod-like structure, which the HA@Ag nanocomposites retained, and the surface of HA was loaded with globular-like Ag NPs with an average diameter of about 5.8 nm, which exhibit a well-crystalline state. The experimental parameters such as pH, the molar ratio of HA and Tollens' reagent, and reductant have a significant effect on the size and distribution of the Ag NPs. Moreover, the antimicrobial activities of HA and HA@Ag against Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus) were evaluated via broth dilution, filter paper diffusion, optical density (OD₆₀₀) and electron microscopy observation. The as-prepared HA@Ag nanocomposites exhibit excellent antibacterial activities, especially for S. aureus. The minimum inhibition concentration (MIC) of HA@Ag is only 3.9 μg mL⁻¹.

We demonstrate a facile and green rapid approach for the synthesis of uniform poriferous hydroxylapatite (HA) and poriferous silver nanoparticles (Ag NPs)-decorated hydroxylapatite (HA@Ag) nanocomposites with excellent antibacterial properties.

Continuous hydrothermal flow synthesis of graphene quantum dots

A rapid, continuous hydrothermal flow synthesis route and life cycle assessment was employed for the synthesis of graphene quantum dots in the presence of calixarene.

Review on the Antimicrobial Properties of Carbon Nanostructures

Swift developments in nanotechnology have prominently encouraged innovative discoveries across many fields. Carbon-based nanomaterials have emerged as promising platforms for a broad range of applications due to their unique mechanical, electronic, and biological properties. Carbon nanostructures (CNSs) such as fullerene, carbon nanotubes (CNTs), graphene and diamond-like carbon (DLC) have been demonstrated to have potent broad-spectrum antibacterial activities toward pathogens. In order to ensure the safe and effective integration of these structures as antibacterial agents into biomaterials, the specific mechanisms that govern the antibacterial activity of CNSs need to be understood, yet it is challenging to decouple individual and synergistic contributions of physical, chemical and electrical effects of CNSs on cells. In this article, recent progress in this area is reviewed, with a focus on the interaction between different families of carbon nanostructures and microorganisms to evaluate their bactericidal performance.

Continuous Hydrothermal Synthesis of Inorganic Nanoparticles: Applications and Future Directions

Nanomaterials are at the leading edge of the emerging field of nanotechnology. Their unique and tunable size-dependent properties (in the range 1-100 nm) make these materials indispensable in many modern technological applications. In this Review, we summarize the state-of-art in the manufacture and applications of inorganic nanoparticles made using continuous hydrothermal flow synthesis (CHFS) processes. First, we introduce ideal requirements of any flow process for nanoceramics production, outline different approaches to CHFS, and introduce the pertinent properties of supercritical water and issues around mixing in flow, to generate nanoparticles. This Review then gives comprehensive coverage of the current application space for CHFS-made nanomaterials including optical, healthcare, electronics (including sensors, information, and communication technologies), catalysis, devices (including energy harvesting/conversion/fuels), and energy storage applications. Thereafter, topics of precursor chemistry and products, as well as materials or structures, are discussed (surface-functionalized hybrids, nanocomposites, nanograined coatings and monoliths, and metal-organic frameworks). Later, this Review focuses on some of the key apparatus innovations in the field, such as in situ flow/rapid heating systems (to investigate kinetics and mechanisms), approaches to high throughput flow syntheses (for nanomaterials discovery), as well as recent developments in scale-up of hydrothermal flow processes. Finally, this Review covers environmental considerations, future directions and capabilities, along with the conclusions and outlook.

Antibacterial properties of amino acid functionalized silver nanoparticles decorated on graphene oxide sheets

Graphene oxide (GO) sheets decorated with amino acid L-cysteine (L-cys) functionalized silver nanoparticles (GO-L-cys-Ag) was synthesized by AgNO₃, trisodium citrate, and NaBH₄. GO-L-cys-Ag nanocomposite was characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectra, ultraviolet-visible (UV-vis) absorption spectra, which demonstrated that a diameter of L-cys-AgNPs compactly deposited on GO. Antibacterial activity tests of GO-L-cys-Ag nanocomposite were carried out using Escherichia coli MTCC 1687 and Staphylococcus aureus MTCC 3160 as model strains of Gram-negative and Gram-positive bacteria, respectively. The effect of bactericide dosage on antibacterial activity of GO-L-cys-Ag nanocomposite was examined by plate count, well diffusion and broth dilution methods. Morphological observation of bacterial cells by scanning electron microscope (SEM) showed that GO-L-cys-Ag nanocomposite was more destructive to cell membrane of Escherichia coli than that of Staphylococcus aureus. The above technique establish that the bactericidal property of GO-L-cys-Ag nanocomposite with wide range of applications in biomedical science.