Biodegradation and Osteosarcoma Cell Cultivation on Poly(aspartic acid) Based Hydrogels

Electrospun polysuccinimide scaffolds containing different salts as potential wound dressing material

In this research, we applied electrospinning to create a two-component biodegradable polymeric scaffold containing polysuccinimide (PSI) and antibacterial salts. Antibacterial agents for therapeutical purposes mostly contain silver ions which are associated with high environmental impact and, in some cases, may cause undesired immune reactions. In our work, we prepared nanofibrous systems containing antibacterial and tissue-regenerating salts of zinc acetate or strontium nitrate in different concentrations, whose structures may be suitable for developing biomedical wound dressing systems in the future. Several experiments have been conducted to optimize the physicochemical, mechanical, and biological properties of the scaffolds developed for application as wound dressings. The scaffold systems obtained by PSI synthesis, salt addition, and fiber formation were first investigated by scanning electron microscopy. In almost all cases, different salts caused a decrease in the fiber diameter of PSI polymer-based systems (<500 nm). Fourier-transform infrared spectroscopy was applied to verify the presence of salts in the scaffolds and to determine the interaction between the salt and the polymer. Another analysis, energy-dispersive X-ray spectroscopy, was carried out to determine strontium and zinc atoms in the scaffolds. Our result showed that the salts influence the mechanical properties of the polymer scaffold, both in terms of specific load capacity and relative elongation values. According to the dissolution experiments, the whole amount of strontium nitrate was dissolved from the scaffold in 8 h; however, only 50% of the zinc acetate was dissolved. In addition, antibacterial activity tests were performed with four different bacterial strains relevant to skin surface injuries, leading to the appearance of inhibition zones around the scaffold discs in most cases. We also investigated the potential cytotoxicity of the scaffolds on human tumorous and healthy cells. Except for the ones containing zinc acetate salt, the scaffolds are not cytotoxic to either tumor or healthy cells.

Formation of Three-Dimensional Polysuccinimide Electrospun Fiber Meshes Induced by the Combination of CaCl2 and Humidity

Even though electrospinning is getting more and more attention, the preparation of 3D nanofibrous meshes is still a big challenge that limits the application of electrospun materials, especially in tissue engineering. To overcome this problem, several solutions are introduced but most of them focus on the postprocessing of the electrospun meshes. This paper presents a straightforward novel method that utilizes the joint effect of the addition of CaCl2 and the relative environmental humidity (RH), which can induce the random 3D formation of polysuccinimide (PSI) electrospun fibers with different such as wrinkled or ribbon-like structures. Although the effect of humidity and inorganic salt additives on the micro and macrostructure of electrospun fibers is known, the connection between the two in this manner has never been presented. To investigate the effect, fibers with different PSI and CaCl2 concentrations at different humidity RH levels are prepared, and their microstructure is visualized with high-resolution scanning electron microscopy (SEM). To reveal the nature of the interaction between the polymer and the CaCl2, Fourier-transformed infrared (FTIR), X-ray diffraction (XRD), and thermogravimetry (TGA) measurements are carried out and 3D nanofibrous structures are obtained.

Sustainable Soil Additives for Water and Micronutrient Supply: Swelling and Chelating Properties of Polyaspartic Acid Hydrogels Utilizing Newly Developed Crosslinkers

Drought and water shortage are serious problems in many arid and semi-arid regions. This problem is getting worse and even continues in temperate climatic regions due to climate change. To address this problem, the use of biodegradable hydrogels is increasingly important for the application as water-retaining additives in soil. Furthermore, efficient (micro-)nutrient supply can be provided by the use of tailored hydrogels. Biodegradable polyaspartic acid (PASP) hydrogels with different available (1,6-hexamethylene diamine (HMD) and L-lysine (LYS)) and newly developed crosslinkers based on diesters of glycine (GLY) and (di-)ethylene glycol (DEG and EG, respectively) were synthesized and characterized using Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) and regarding their swelling properties (kinetic, absorbency under load (AUL)) as well as biodegradability of PASP hydrogel. Copper (II) and zinc (II), respectively, were loaded as micronutrients in two different approaches: in situ with crosslinking and subsequent loading of prepared hydrogels. The results showed successful syntheses of di-glycine-ester-based crosslinkers. Hydrogels with good water-absorbing properties were formed. Moreover, the developed crosslinking agents in combination with the specific reaction conditions resulted in higher water absorbency with increased crosslinker content used in synthesis (10% vs. 20%). The prepared hydrogels are candidates for water-storing soil additives due to the biodegradability of PASP, which is shown in an exemple. The incorporation of Cu(II) and Zn(II) ions can provide these micronutrients for plant growth.

A Bioactive Disintegrable Polymer Nanoparticle for Synergistic Vascular Anticalcification

Although poly(aspartic acid) (PASP), a strong calcium chelating agent, may be potentially effective in inhibition of vascular calcification, its direct administration may lead to side effects. In this study, we employed polysuccinimide, a precursor of PASP, to prepare targeted polysuccinimide-based nanoparticles (PSI NPs) that not only acted as a prodrug but also functioned as a carrier of additional therapeutics to provide powerful synergistic vascular anticalcification effect. This paper shows that chemically modified PSI-NPs can serve as effective nanocarriers for loading of hydrophobic drugs, in addition to anticalcification and antireactive oxygen species (anti-ROS) activities. Curcumin (Cur), with high loading efficiency, was encapsulated into the NPs. The NPs were stable for 16 h in physiological conditions and then slowly dissolved/hydrolyzed to release the therapeutic PASP and the encapsulated drug. The drug release profile was found to be in good agreement with the NP dissolution profile such that complete release occurred after 48 h at physiological conditions. However, under acidic conditions, the NPs were stable, and Cur cumulative release reached only 30% after 1 week. Though highly effective in the prevention of calcium deposition, PSI NPs could not prevent the osteogenic trans-differentiation of vascular smooth muscle cells (VSMCs). The presence of Cur addressed this problem. It not only further reduced ROS level in macrophages but also prevented osteogenic differentiation of VSMCs in vitro. The NPs were examined in vivo in a rat model of vascular calcification induced by kidney failure through an adenine diet. The inclusion of Cur and PSI NPs combined the therapeutic effects of both. Cur-loaded NPs significantly reduced calcium deposition in the aorta without adversely affecting bone integrity or noticeable side effects/toxicity as examined by organ histological and serum biochemistry analyses.

Bioinspired poly(aspartic acid) based hydrogel with ROS scavenging ability as mEGF carrier for wound repairing applications

Poly(amino acid) based self-healing hydrogels have important application in biomedications. In this research, the catechol pendant groups were imported to poly(aspartic acid) based self-healing hydrogel to improved skin adhesion and ROS scavenging performance. The poly(succinimide) (PSI) was reacted with 3,4-dihydroxyphenylalanine (DA) and then hydraziolyzed to import catechol group and hydrazide group respectively, which are responsible for mussel inspired tissue adhesion and dynamic coupling reactivity. The dopamine modified poly(aspartic hydrazide) (PDAH) was reacted with PEO90 dialdehyde (PEO90 DA) to prepare hydrogels, and the resultant hydrogel showed good biocompatibility both in vitro and in vivo. The skin adhesion strength of the mussel inspired hydrogel increased notably with enhanced radical scavenging efficiency fit for in vivo wound repairing applications. The PDAH/PEO90 DA hydrogel also showed sustained albumin release profile and the in vivo wound repairing experiment proved the mouse Epidermal Growth Factor (mEGF) loaded hydrogel as wound dressing material accelerated the wound repairing rate.

Poly(succinimide) nanoparticles as reservoirs for spontaneous and sustained synthesis of poly(aspartic acid) under physiological conditions: potential for vascular calcification therapy and oral drug delivery

This paper describes the preparation of poly(succinimide) nanoparticles (PSI NPs) and investigates their properties and characteristics. Employing direct and inverse precipitation methods, stable PSI NPs with tunable size and narrow dispersity were prepared without the use of any stabilizer or emulsifier. It was demonstrated that PSI NPs convert to poly(aspartic acid) (PASP) gradually under physiological conditions (37 °C, pH 7.4), while remaining stable under mildly acidic conditions. The dissolution profile was tuned and delayed by chemical modification of PSI. Through grafting a fluorophore to the PSI backbone, it was also demonstrated that such a spontaneous conversion could offer great potential for oral delivery of therapeutic agents to the colon. Sustained PASP synthesis also contributed to a sustained reduction of reactive oxygen species induced by iron. Furthermore, PSI NPs effectively prevented in vitro calcification of smooth muscle cells. This was attributed to the chelation of calcium ions to PASP, thereby inhibiting calcium deposition, because under cell culture conditions PSI NPs serve as reservoirs for the sustained synthesis of PASP. Overall, this study sheds light on the preparation and features of biocompatible and biodegradable PSI-based NPs and paves the way for further research to discover as-yet unfulfilled potential of this polymer in the form of nanoparticles.

A tyrosine, histidine-selective bifunctional cross-linker for protein structure analysis

Chemical cross-linking mass spectrometry (XL-MS) significantly contributes to the analysis of protein structures and the elucidation of protein-protein interactions. Currently available cross-linkers mainly target N-terminus, lysine, glutamate, aspartate, and cysteine residues in protein. Herein, a bifunctional cross-linker, named [4,4'-(disulfanediylbis(ethane-2,1-diyl)) bis(1-methyl-1,2,4-triazolidine-3,5-dione)] (DBMT) has been designed and characterized aiming to extremely expand the application of XL-MS approach. DBMT is capable of selectively targeting tyrosine residue in protein via an electrochemical click reaction, and/or targeting histidine residue in protein in the presence of ¹O₂ generated under photocatalytic reaction. A novel cross-linking strategy based on this cross-linker has been developed and demonstrated using model proteins, which provides a complementary XL-MS tool analyzing protein structure, protein complexes, protein-protein interactions, and even protein dynamics.

In situ gelation of thiolated poly(aspartic acid) derivatives through oxidant-free disulfide formation for ophthalmic drug delivery

Efficient topical treatment of ocular diseases requires a prolonged residence time of drug formulations. An in situ gelling, mucoadhesive system can provide improved residence time while keeps the installation of the formulation easy and accurate due to its low initial viscosity. We synthesized a two-component, biocompatible water-based liquid formulation showing in situ gelation upon mixing. S-protected, preactivated derivatives of thiolated poly(aspartic acid) (PASP-SS-MNA) were synthesized by coupling the free thiol groups of thiolated poly(aspartic acid) (PASP-SH) with 6-mercaptonicotinic acid (MNA). The amount of protecting groups was 242, 341, and 530 µmol/g depending on the degree of thiolation of PASP. The chemical interaction between PASP-SS-MNA and mucin was proven, indicating the mucoadhesive properties. Disulfide cross-linked hydrogels were formed in situ without an oxidizing agent by mixing the aqueous solutions of PASP-SS-MNA and PASP-SH. The gelation time was controlled between 1 and 6 min, while the storage modulus was as high as 4-16 kPa depending on the composition. Swelling experiments showed that hydrogels with no residual thiol groups are stable in phosphate-buffered saline at pH = 7.4. In contrast, the presence of free thiol groups leads to the dissolution of the hydrogel with a rate depending on the excess of thiol groups. The biological safety of the polymers and MNA was confirmed on Madin-Darby Canine Kidney cell line. Furthermore, a prolonged release of ofloxacin was observed at pH = 7.4 compared to a conventional liquid formulation, supporting the potential of the developed biopolymers in ophthalmic drug delivery.

Characterization of Electrospun Polysuccinimide-Dopamine Conjugates and Effect on Cell Viability and Uptake

Biocompatible nanofibrous systems made by electrospinning have been studied widely for pharmaceutical applications since they have a high specific surface and the capability to make the entrapped drug molecule amorphous, which increases bioavailability. By covalently conjugating drugs onto polymers, the degradation of the drug as well as the fast clearance from the circulation can be avoided. Although covalent polymer-drug conjugates have a lot of advantages, there is a lack of research focusing on their nano-formulation by electrospinning. In this study, polysuccinimide (PSI) based electrospun fibrous meshes conjugated with dopamine (DA) are prepared. Fiber diameter, mechanical properties, dissolution kinetics and membrane permeability are thoroughly investigated, as these are crucial for drug delivery and implantation. Dopamine release kinetics prove the prolonged release that influenced the viability and morphology of periodontal ligament stem cells (PDLSCs) and SH-SY5Y cells. The presence of dopamine receptors on both cell types is also demonstrated and the uptake of the conjugates is measured. According to flow cytometry analysis, the conjugates are internalized by both cell types, which is influenced by the chemical structure and physical properties. In conclusion, electrospinning of PSI-DA conjugates alters release kinetics, meanwhile, conjugated dopamine can play a key role in cellular uptake.

Metal ion chelation of poly(aspartic acid): From scale inhibition to therapeutic potentials

Poly(aspartic acid) (PASP) is a biodegradable, biocompatible water-soluble synthetic anionic polypeptide. PASP has shown a strong affinity and thus robust complexation with heavy and alkaline earth metal ions, from which several applications are currently benefiting, and several more could also originate. This paper discusses different areas where the ion chelation ability of PASP has thus far been exploited. Due to its calcium chelation ability, PASP prevents precipitation of calcium salts and hence is widely used as an effective scale inhibitor in industry. Due to potassium chelation, PASP prevents precipitation of potassium tartrate and is employed as an efficient and edible stabilizer for wine preservation. Due to iron chelation, PASP inhibits corrosion of steel surfaces in harsh environments. Due to chelation, PASP can also enhance stability of various colloidal systems that contain metal ions. The chelation ability of PASP alleviated the toxicity of heavy metals in Zebrafish, inhibited the formation of kidney stones and dissolved calcium phosphate which is the main mineral of the calcified vasculature. These findings and beyond, along with the biocompatibility and biodegradability of the polymer could direct future investigations towards chelation therapy by PASP and other novel and undiscovered areas where metal ions play a key role.

Self-healing pectin/cellulose hydrogel loaded with limonin as TMEM16A inhibitor for lung adenocarcinoma treatment

Lung cancer as one of the highest incident malignant tumors did not receive satisfactory chemotherapy due to lack of specific drug targets and targeted drugs. This study screened a new effective lung tumor inhibitor limonin from herbal medicine, which inhibited proliferation and promoted apoptosis of lung adenocarcinoma cells by targeting specific high expressed TMEM16A ion channel. Moreover, a novel biodegradable self-healing hydrogel was prepared from acylhydrazide functionalized carboxymethyl cellulose (CMC-AH) and oxidized pectin (pec-CHO) to reduce the side effects of the limonin to the body. The hydrogels showed fast gelation, good biocompatibility and sustained limonin release property. The limonin-loaded hydrogel significantly inhibited the growth of lung adenocarcinoma in xenografts mice because the limonin inhibited the proliferation, migration and promoted apoptosis of LA795 cells, and eliminated the acute toxicity through sustained release from the hydrogel. Combined the antitumor performance of the limonin and sustained release of pec-CHO/CMC-AH hydrogel, this limonin/hydrogel system achieved satisfactory antitumor effect and eliminated side effects in vivo. Therefore, this system has great potential application for enhanced lung adenocarcinoma therapy.

An Implantable Magneto-Responsive Poly(aspartamide) Based Electrospun Scaffold for Hyperthermia Treatment

When exposed to an alternating magnetic field, superparamagnetic nanoparticles can elicit the required hyperthermic effect while also being excellent magnetic resonance imaging (MRI) contrast agents. Their main drawback is that they diffuse out of the area of interest in one or two days, thus preventing a continuous application during the typical several-cycle multi-week treatment. To solve this issue, our aim was to synthesise an implantable, biodegradable membrane infused with magnetite that enabled long-term treatment while having adequate MRI contrast and hyperthermic capabilities. To immobilise the nanoparticles inside the scaffold, they were synthesised inside hydrogel fibres. First, polysuccinimide (PSI) fibres were produced by electrospinning and crosslinked, and then, magnetitc iron oxide nanoparticles (MIONs) were synthesised inside and in-between the fibres of the hydrogel membranes with the well-known co-precipitation method. The attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) investigation proved the success of the chemical synthesis and the presence of iron oxide, and the superconducting quantum interference device (SQUID) study revealed their superparamagnetic property. The magnetic hyperthermia efficiency of the samples was significant. The given alternating current (AC) magnetic field could induce a temperature rise of 5 °C (from 37 °C to 42 °C) in less than 2 min even for five quick heat-cool cycles or for five consecutive days without considerable heat generation loss in the samples. Short-term (1 day and 7 day) biocompatibility, biodegradability and MRI contrast capability were investigated in vivo on Wistar rats. The results showed excellent MRI contrast and minimal acute inflammation.

Analysis of Three-Dimensional Cell Migration in Dopamine-Modified Poly(aspartic acid)-Based Hydrogels

Several types of promising cell-based therapies for tissue regeneration have been developing worldwide. However, for successful therapeutical application of cells in this field, appropriate scaffolds are also required. Recently, the research for suitable scaffolds has been focusing on polymer hydrogels due to their similarity to the extracellular matrix. The main limitation regarding amino acid-based hydrogels is their difficult and expensive preparation, which can be avoided by using poly(aspartamide) (PASP)-based hydrogels. PASP-based materials can be chemically modified with various bioactive molecules for the final application purpose. In this study, dopamine containing PASP-based scaffolds is investigated, since dopamine influences several cell biological processes, such as adhesion, migration, proliferation, and differentiation, according to the literature. Periodontal ligament cells (PDLCs) of neuroectodermal origin and SH-SY5Y neuroblastoma cell line were used for the in vitro experiments. The chemical structure of the polymers and hydrogels was proved by ¹H-NMR and FTIR spectroscopy. Scanning electron microscopical (SEM) images confirmed the suitable pore size range of the hydrogels for cell migration. Cell viability assay was carried out according to a standardized protocol using the WST-1 reagent. To visualize three-dimensional cell distribution in the hydrogel matrix, two-photon microscopy was used. According to our results, dopamine containing PASP gels can facilitate vertical cell penetration from the top of the hydrogel in the depth of around 4 cell layers (~150 μm). To quantify these observations, a detailed image analysis process was developed and firstly introduced in this paper.

Synthesis of polyaspartic acid-capped 2-aminoethylamino acid as a green water treatment agent and study of its inhibition performance and mechanism for calcium scales

Polyaspartic acid (PASP), a well-known green scale inhibitor for industrial water treatment, might be decomposed with prolonged duration, and its anti-scaling performance against CaCO₃ and CaSO₄ is diminished at a low concentration (<10 mg L⁻¹) and a high temperature. With semi-ethylenediaminetetraacetic acid (EDTA) tetrasodium salt as the mimicking model, novel phosphorus-free PASP-capped 2-aminoethylamino acid (PASP–ED₂A) containing side chains bearing multi-functional groups is rationally designed and successfully prepared via the ring-opening reaction of cheap poly(succinimide) under mild reaction conditions with the assistance of readily available 2-aminoethyl amino acid. The static scale inhibition method is used to evaluate the scale inhibition performance of the as-synthesized PASP derivative. Scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy are utilized to monitor the crystallization process of calcium carbonate and calcium sulfate scales, and density functional theory calculations are conducted to shed light on the relationship between the molecular structure and scale inhibition mechanism of PASP–ED₂A. Results show that the as-prepared PASP–ED₂A shows better scale inhibition performance for CaCO₃ and CaSO₄ than PASP with a low concentration, a high temperature, and an extended duration. Particularly, PASP–ED₂A with a concentration of 10 mg L⁻¹ exhibits the best scale inhibition performance for CaCO₃; its scale inhibition capacity is about two times as much as that of PASP. The reason lies in that the coordination atoms in the molecular structure of PASP–ED₂A can chelate with Ca²⁺ to inhibit the combination of Ca²⁺ with anions and prevent the generation of CaCO₃ and CaSO₄ scales. The PASP–ED₂A derivative can more efficiently retard the formation and growth of CaCO₃ and CaSO₄ crystal nuclei and exerts better inhibition performance against CaCO₃ and CaSO₄ scales than PASP.

A novel phosphorus-free PASP–ED₂A antiscalant exhibits good scale inhibition performance against calcium scale at a low concentration or a high temperature, better than that of PASP.

Culturing and Scaling up Stem Cells of Dental Pulp Origin Using Microcarriers

Ectomesenchymal stem cells derived from the dental pulp are of neural crest origin, and as such are promising sources for cell therapy and tissue engineering. For safe upscaling of these cells, microcarrier-based culturing under dynamic conditions is a promising technology. We tested the suitability of two microcarriers, non-porous Cytodex 1 and porous Cytopore 2, for culturing well characterized dental pulp stem cells (DPSCs) using a shake flask system. Human DPSCs were cultured on these microcarriers in 96-well plates, and further expanded in shake flasks for upscaling experiments. Cell viability was measured using the alamarBlue assay, while cell morphology was observed by conventional and two-photon microscopies. Glucose consumption of cells was detected by the glucose oxidase/Clark-electrode method. DPSCs adhered to and grew well on both microcarrier surfaces and were also found in the pores of the Cytopore 2. Cells grown in tissue culture plates (static, non-shaking conditions) yielded 7 × 10⁵ cells/well. In shake flasks, static preincubation promoted cell adhesion to the microcarriers. Under dynamic culture conditions (shaking) 3 × 10⁷ cells were obtained in shake flasks. The DPSCs exhausted their glucose supply from the medium by day seven even with partial batch-feeding. In conclusion, both non-porous and porous microcarriers are suitable for upscaling ectomesenchymal DPSCs under dynamic culture conditions.

Tumour microenvironment-responsive nanoplatform based on biodegradable liposome-coated hollow MnO2 for synergistically enhanced chemotherapy and photodynamic therapy

BACKGROUND

Existing therapeutic efficacy of chemotherapy and photodynamic therapy (PDT) is always affected by some resistance factors from tumour environment (TME), such as hypoxia and the antioxidant defense system.

PURPOSE

This study aims at developing a cascaded intelligent multifunctional nanoplatforms to modulate the TME resistance for synergistically enhanced chemo- and photodynamic therapies.

METHODS

In this study, we synthesised hollow manganese dioxide nanoparticles (HMDNs) loaded with the hydrophilic chemotherapeutic drug (acriflavine, ACF) and the hydrophobic photosensitizer (chlorine6, Ce6), which was further encapsulated by pH-sensitive liposome to form core-shell nanocomposite, with surface modified with arginine-glycine-aspartic acid (RGD) peptide to achieve tumour targeting.

RESULTS

After uptake by tumour cells, the liposome shell was rapidly degraded by the low pH, and the inner core could be released from the liposome. Then, the released HMDNs/ACF/Ce6 would be dissociated by low pH and high levels of intracellular GSH within TME to release encapsulated drugs, thereby resulting in synergistic effects of chemotherapy and PDT. Meanwhile, the released ACF could bind with HIF-1a and then inhibit the expression levels of HIF-1's downstream signalling molecules P-gp and VEGF, which could further strengthen the antitumor effects. As a result, HMDNs/ACF/Ce6@Lipo-RGD NPs with laser irradiation exhibited superior anti-tumour therapeutic efficiency.

Osteosarcoma mechanobiology and therapeutic targets

Osteosarcoma (OS) is the one of the most common primary tumors of bone with less than a 20% 5-year survival rate after the development of metastases. OS is highly predisposed in Paget's disease (PD) of bone, and both have common characteristic skeletal features due to rapid bone remodeling. OS prognosis is location dependent which further emphasizes the likely contribution of the bone microenvironment in its pathogenesis. Mechanobiology is the phenomenon when mechanical cues from the changing physical microenvironment of bone are transduced to biological pathways through mechanosensitive cellular components. Mechanobiology-driven therapies have been used for curbing tumor progression by direct alteration of the physical microenvironment or inhibition of metastasis-associated mechanosensitive proteins. This review emphasizes the contribution of mechanobiology to OS progression, and sheds light on current mechanobiology-based therapies and potential new targets for improving disease management. Additionally, the variety of 3D models currently used to study OS mechanobiology are summarized.

Pectin-based injectable and biodegradable self-healing hydrogels for enhanced synergistic anticancer therapy

We report a new injectable and biodegradable self-healing hydrogel that shows enhanced anticancer drug release property. The hydrogel was prepared based on biodegradable pectin aldehyde (pectin-CHO) and acylhydrazide functionalized polymer poly(N-isopropylacrylamide-stat-acylhydrazide) P(NIPAM-stat-AH). Due to the dynamic nature of acylhydrazone bonds, the hydrogel exhibits self-healing behavior and its mechanical properties can be regulated by the weight ratio of P(NIPAM-stat-AH) to pectin-CHO. The in vitro and in vivo experiments show the hydrogel has not only good biocompatibility and biodegradability, but also decreases the toxicity of the drugs to living body and exhibits controlled drug release behavior as synergetic anti-tumor drug delivery carriers. The results demonstrate that the pectin-based self-healing hydrogels are injectable, biodegradable, and self-healable that is promising for localized anti-tumor therapy. STATEMENT OF SIGNIFICANCE: Injectable hydrogels with self-healing property and biodegradability are excellent candidates as drug loading and release carrier for biomedical applications. However the pectin as a biobased material is always neglected in self-healing hydrogel preparation. In this study, we fabricated biodegradable self-healing hydrogels from aldehyde group bearing pectin (pectin-CHO) and thermo-responsive copolymer of P(NIPAM-stat-AH). The hydrogel showed sustained drug release behavior, good biocompatibility and biodegradability both in vitro and in vivo. The in vivo experiment shows that the hydrogel with coloaded DOX and CA4 has synergetic therapy to CT26 tumors and this kind of biodegradable hydrogel has great potential application in antitumor therapy.

Stimuli-Responsive Poly(aspartamide) Derivatives and Their Applications as Drug Carriers

Poly(aspartamide) derivatives, one kind of amino acid-based polymers with excellent biocompatibility and biodegradability, meet the key requirements for application in various areas of biomedicine. Poly(aspartamide) derivatives with stimuli-responsiveness can usually respond to external stimuli to change their chemical or physical properties. Using external stimuli such as temperature and pH as switches, these smart poly(aspartamide) derivatives can be used for convenient drug loading and controlled release. Here, we review the synthesis strategies for preparing these stimuli-responsive poly(aspartamide) derivatives and the latest developments in their applications as drug carriers.

Poly(amino acid) based fibrous membranes with tuneable in vivo biodegradation

In this work two types of biodegradable polysuccinimide-based, electrospun fibrous membranes are presented. One contains disulfide bonds exhibiting a shorter (3 days) in vivo biodegradation time, while the other one has alkyl crosslinks and a longer biodegradation time (more than 7 days). According to the mechanical measurements, the tensile strength of the membranes is comparable to those of soft the connective tissues and visceral tissues. Furthermore, the suture retention test suggests, that the membranes would withstand surgical handling and in vivo fixation. The in vivo biocompatibility study demonstrates how membranes undergo in vivo hydrolysis and by the 3rd day they become poly(aspartic acid) fibrous membranes, which can be then enzymatically degraded. After one week, the disulfide crosslinked membranes almost completely degrade, while the alkyl-chain crosslinked ones mildly lose their integrity as the surrounding tissue invades them. Histopathology revealed mild acute inflammation, which diminished to a minimal level after seven days.

Hyaluronic Acid Is an Effective Dermal Filler for Lip Augmentation: A Meta-Analysis

Introduction: The lips and the mouth play an indispensable role in vocalization, mastication and face aesthetics. Various noxious factors may alter and destruct the original structure, and appearance of the lips and the anatomical area surrounding the mouth. The application of hyaluronic acid (HA) may serve as a safe method for lip regeneration. Although a number of studies exist for HA effectiveness and safety, its beneficial effect is not well-established. Aim: The present meta-analysis and systematic review was performed to investigate the effectiveness of HA on lip augmentation. We also investigated the types and nature of adverse effects (AEs) of HA application. Methods: We reported our meta-analysis in accordance with the PRISMA Statement. PROSPERO protocol registration: CRD42018102899. We performed the systematic literature search in CENTRAL, Embase, and MEDLINE. Randomized controlled trials, cohort studies, case series and case reports were included. The untransformed proportion (random-effects, DerSimonian-Laird method) of responder rate to HA injection was calculated. For treatment related AEs descriptive statistics were used. Results: The systematic literature search yielded 32 eligible records for descriptive statistics and 10 records for quantitative synthesis. The results indicated that the overall estimate of responders (percentage of subjects with increased lip fullness by one point or higher) was 91% (ES = 0.91, 95% CI:0.85-0.96) 2 months after injection. The rate of responders was 74% (ES = 0.74, 95% CI:0.66-0.82) and 46% (ES = 0.46, 95% CI:0.28-0.65) after 6 and 12 months, respectively. We included 1,496 participants for estimating the event rates of AEs. The most frequent treatment-related AEs were tenderness (88.8%), injection site swelling (74.3%) and bruising (39.5%). Rare AEs included foreign body granulomas (0.6%), herpes labialis (0.6%) and angioedema (0.3%). Conclusion: Our meta-analysis revealed that lip augmentation with injectable HA is an efficient method for increasing lip fullness for at least up to 6 months after augmentation. Moreover, we found that most AEs of HA treatment were mild or moderate, but a small number of serious adverse effects were also found. In conclusion, further well-designed RCTs are still needed to make the presently available evidence stronger.

Green and High Effective Scale Inhibitor Based on Ring-Opening Graft Modification of Polyaspartic Acid

Polyaspartic acid (PASP)-based green scale inhibitor has great potential application in water treatment. Here, we first synthesized PASP in ionic liquid. Then, an effective PASP-based green scale inhibitor was synthesized by ring-opening graft modification of PASP with both aspartic acid (ASP) and monoethanolamine (MEA). Its chemical composition was characterized by gel chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), and 1H nuclear magnetic resonance (1H NMR). Scale inhibition efficiency was measured by static scale inhibition tests. The results showed that the new PASP-based scale inhibitor has high scale inhibition to both CaCO3 and Ca3(PO4)2. When the concentration was increased to 2 mg/L, the inhibition efficiency of the new PASP-based scale inhibitor was 99% for CaCO3, while when the concentration was raised to only 4 mg/L, its inhibition efficiency increased to 100% for Ca3(PO4)2. Scanning electronic microscopy (SEM) and X-ray diffraction (XRD) were used to analyze the changes of crystal structure for CaCO3 and Ca3(PO4)2 after adding the new PASP-based scale inhibitor. The crystal size of CaCO3 and Ca3(PO4)2 became smaller and the crystal form became amorphous after adding the modified PASPs compared with adding pure PASP. Moreover, the modified PASP showed good biodegradation performance.

Poly(aspartic acid) in Biomedical Applications: From Polymerization, Modification, Properties, Degradation, and Biocompatibility to Applications

Poly(aspartic acid) (PASP) is an anionic polypeptide that is a highly versatile, biocompatible, and biodegradable polymer that fulfils key requirements for use in a wide variety of biomedical applications. The derivatives of PASP can be readily tailored via the amine-reactive precursor, poly(succinimide) (PSI), which opens up a large window of opportunity for the design and development of novel biomaterials. PASP also has a strong affinity with calcium ions, resulting in complexation, which has been exploited for bone targeting and biomineralization. In addition, recent studies have further verified the biocompatibility and biodegradability of PASP-based polymers, which is attributed to their protein-like structure. In light of growing interest in PASP and its derivatives, this paper presents a comprehensive review on their synthesis, characterization, modification, biodegradation, biocompatibility, and applications in biomedical areas.

Poly(aspartic acid) based self-healing hydrogels with antibacterial and light-emitting properties for wound repair

We report here a self-healing hydrogel with antibacterial and light-emitting properties for wound repair. The hydrogel was prepared by reaction of poly(aspartic acid) (PASP) derivatives bearing groups of quaternary ammonium and boronic acid with poly(vinyl alcohol) (PVA). Due to the dynamic nature of boronic ester bonds, bacteria-killing activity of quaternary ammonium, and light-emitting activity of phenylboronic ester, the resultant hydrogels featured self-healing, antibacterial and light-emitting properties. The hydrogels show controlled release behavior of mouse epidermal growth factor (mEGF) and the in vivo studies show mEGF loaded hydrogel accelerate the wound repair of model mice and improve skin cell proliferation by prevention of bacterial infections. The PASP based hydrogels would show great promise in bio-applications, in particular for wound dressing and tissue repairing.

Investigation of the Cytotoxicity of Electrospun Polysuccinimide-Based Fiber Mats

This study investigated cell viability in the presence of allylamine-modified and plasma-treated electrospun polysuccinimide fiber mats (PSI-AAmp). Low pressure non-equilibrium plasma was used for crosslinking the PSI-AAm. Comparison of FTIR and XPS analyses demonstrated that crosslinking occurred on the surface of the samples. Cell viability was investigated using the MG-63 osteosarcoma cell line and WST-1 viability reagent. Since PSI hydrolyzes to poly(aspartic acid) (PASP), PASP was used in addition to the regular controls (cells only). Phase contrast showed normal morphology in all cases at 24 h; however, in the presence of PSI-AAmp at 72 h, some rounded, dead cells could also be seen, and proliferation was inhibited. Since proliferation in the presence of PASP alone was not inhibited, the cause of inhibition was not the final product of the hydrolysis. Further investigations will be carried out to pinpoint the cause.

A Biocompatible, Stimuli-Responsive, and Injectable Hydrogel with Triple Dynamic Bonds

Injectable hydrogels have attracted growing interests as promising biomaterials for clinical applications, due to their minimum invasive implanting approach and easy-handling performance. Nevertheless, natural biomaterials-based injectable hydrogels with desirable nontoxicity are suffering from limited functions, failing to fulfill the requirements of clinical biomaterials. The development of novel injectable biomaterials with a combination of biocompatibility and adequate functional properties is a growing urgency toward biomedical applications. In this contribution, we report a simple and effective approach to fabricate multi-functional CMC-OSA-DTP hydrogels. Two kinds of natural polysaccharide derived polymers, carboxymethyl chitosan (CMC) and oxidized alginate (OSA) along with 3,3'-dithiopropionic acid dihydrazide (DTP) were utilized to introduce three dynamic covalent bonds. Owing to the existence of triple dynamic bonds, this unique CMC-OSA-DTP hydrogel possessed smart redox and pH stimuli-responsive property, injectability as well as self-healing ability. In addition, the CCK-8 and live/dead assays demonstrated satisfying cytocompatibility of the CMC-OSA-DTP hydrogel in vitro. Based on its attractive properties, this easy-fabricated and multi-functional hydrogel demonstrated the great potential as an injectable biomaterial in a variety of biomedical applications.

Modeling the Tumor Microenvironment and Pathogenic Signaling in Bone Sarcoma

Investigations of cancer biology and screening of potential therapeutics for efficacy and safety begin in the preclinical laboratory setting. A staple of most basic research in cancer involves the use of tissue culture plates, on which immortalized cell lines are grown in monolayers. However, this practice has been in use for over six decades and does not account for vital elements of the tumor microenvironment that are thought to aid in initiation, propagation, and ultimately, metastasis of cancer. Furthermore, information gleaned from these techniques does not always translate to animal models or, more crucially, clinical trials in cancer patients. Osteosarcoma (OS) and Ewing sarcoma (ES) are the most common primary tumors of bone, but outcomes for patients with metastatic or recurrent disease have stagnated in recent decades. The unique elements of the bone tumor microenvironment have been shown to play critical roles in the pathogenesis of these tumors and thus should be incorporated in the preclinical models of these diseases. In recent years, the field of tissue engineering has leveraged techniques used in designing scaffolds for regenerative medicine to engineer preclinical tumor models that incorporate spatiotemporal control of physical and biological elements. We herein review the clinical aspects of OS and ES, critical elements present in the sarcoma microenvironment, and engineering approaches to model the bone tumor microenvironment. Impact statement The current paradigm of cancer biology investigation and therapeutic testing relies heavily on monolayer, monoculture methods developed over half a century ago. However, these methods often lack essential hallmarks of the cancer microenvironment that contribute to tumor pathogenesis. Tissue engineers incorporate scaffolds, mechanical forces, cells, and bioactive signals into biological environments to drive cell phenotype. Investigators of bone sarcomas, aggressive tumors that often rob patients of decades of life, have begun to use tissue engineering techniques to devise in vitro models for these diseases. Their efforts highlight how critical elements of the cancer microenvironment directly affect tumor signaling and pathogenesis.

Nanochaperones Mediated Delivery of Insulin

Insulin would undergo unfolding and fibrillation under stressed conditions, which may cause serious biotechnological and medical problems. Herein, by mimicking the structure and functions of natural chaperones HSP70s, self-assembled polymeric micelles are used as nanochaperones for the delivery of insulin. The confined hydrophobic domains on the surface of nanochaperones adsorb partially unfolded insulin, inhibiting the aggregation and fibrillation and enhancing the stability of insulin. The bioactivity of insulin is well-reserved after incubation with the nanochaperones at 37 °C for 7 d or heating at 70 °C for 1 h. The stealthy poly(ethylene glycol) chains around the confined domains protect the adsorbed insulin from enzymatic degradation and prolong the circulation time. More importantly, the excellent glucose sensitivity of the hydrophobic domains enables the nanochaperones to release and refold insulin in native form in response to hyperglycemia. This kind of nanochaperone may offer a hopeful strategy for the protection and delivery of insulin.

Protease-Catalyzed l-Aspartate Oligomerization: Substrate Selectivity and Computational Modeling

Poly(aspartic acid) (PAA) is a biodegradable water-soluble anionic polymer that can potentially replace poly(acrylic acid) for industrial applications and has shown promise for regenerative medicine and drug delivery. This paper describes an efficient and sustainable route that uses protease catalysis to convert l-aspartate diethyl ester (Et2-Asp) to oligo(β-ethyl-α-aspartate), oligo(β-Et-α-Asp). Comparative studies of protease activity for oligo(β-Et-α-Asp) synthesis revealed α-chymotrypsin to be the most efficient. Papain, which is highly active for l-glutamic acid diethyl ester (Et2-Glu) oligomerization, is inactive for Et2-Asp oligomerization. The assignment of α-linkages between aspartate repeat units formed by α-chymotrypsin catalysis is based on nuclear magnetic resonance (NMR) trifluoacetic acid titration, circular dichroism, and NMR structural analysis. The influence of reaction conditions (pH, temperature, reaction time, and buffer/monomer/α-chymotrypsin concentrations) on oligopeptide yield and average degree of polymerization (DPavg) was determined. Under preferred reaction conditions (pH 8.5, 40 °C, 0.5 M Et2-Asp, 3 mg/mL α-chymotrypsin), Et2-Asp oligomerizations reached maximum oligo(β-Et-α-Asp) yields of ∼60% with a DPavg of ∼12 (M n 1762) in just 5 min. Computational modeling using Rosetta software gave relative energies of substrate docking to papain and α-chymotrypsin active sites. The substrate preference calculated by Rosetta modeling of α-chymotrypsin and papain for Et2-Asp and Et2-Glu oligomerizations, respectively, is consistent with experimental results.

Fully amino acid-based hydrogel as potential scaffold for cell culturing and drug delivery

Polymer hydrogels are ideal scaffolds for both tissue engineering and drug delivery. A great advantage of poly(amino acid)-based hydrogels is their high similarity to natural proteins. However, their expensive and complicated synthesis often limits their application. The use of poly(aspartic acid) (PASP) seems an appropriate solution for this problem due to the relatively cheap and simple synthesis of PASP. Using amino acids not only as building blocks in the polymer backbone but also as cross-linkers can improve the biocompatibility and the biodegradability of the hydrogel. In this paper, PASP cross-linked with cystamine (CYS) and lysine-methylester (LYS) was introduced as fully amino acid-based polymer hydrogel. Gels were synthesized employing six different ratios of CYS and LYS. The pH dependent swelling degree and the concentration of the elastically active chain were determined. After reduction of the disulfide bonds of CYS, the presence of thiol side groups was also detected. To determine the concentration of the reactive cross-linkers in the hydrogels, a new method based on the examination of the swelling behavior was established. Using metoprolol as a model drug, cell proliferation and drug release kinetics were studied at different LYS contents and in the presence of thiol groups. The optimal ratio of cross-linkers for the proliferation of periodontal ligament cells was found to be 60-80% LYS and 20-40% CYS. The reductive conditions resulted in an increased drug release due to the cleavage of disulfide bridges in the hydrogels. Consequently, these hydrogels provide new possibilities in the fields of both tissue engineering and controlled drug delivery.

Free thiol groups on poly(aspartamide) based hydrogels facilitate tooth-derived progenitor cell proliferation and differentiation

Cell-based tissue reconstruction is an important field of regenerative medicine. Stem and progenitor cells derived from tooth-associated tissues have strong regeneration potential. However, their in vivo application requires the development of novel scaffolds that will provide a suitable three-dimensional (3D) environment allowing not only the survival of the cells but eliciting their proliferation and differentiation. Our aim was to study the viability and differentiation capacity of periodontal ligament cells (PDLCs) cultured on recently developed biocompatible and biodegradable poly(aspartamide) (PASP)-based hydrogels. Viability and behavior of PDLCs were investigated on PASP-based hydrogels possessing different chemical, physical and mechanical properties. Based on our previous results, the effect of thiol group density in the polymer matrix on cell viability, morphology and differentiation ability is in the focus of our article. The chemical composition and 3D structures of the hydrogels were determined by FT Raman spectroscopy and Scanning Electron Microscopy. Morphology of the cells was examined by phase contrast microscopy. To visualize cell growth and migration patterns through the hydrogels, two-photon microscopy were utilized. Cell viability analysis was performed according to a standardized protocol using WST-1 reagent. PDLCs were able to attach and grow on PASP-based hydrogels. An increase in gel stiffness enhanced adhesion and proliferation of the cells. However, the highest population of viable cells was observed on the PASP gels containing free thiol groups. The presence of thiol groups does not only enhance viability but also facilitates the osteogenic direction of the differentiating cells. These cell-gel structures seem to be highly promising for cell-based tissue reconstruction purposes in the field of regenerative medicine.

Hydrogels Based on Poly(aspartic acid): Synthesis and Applications

This review presents an overview on the recent progress in the synthesis, crosslinking, interpenetrating networks, and applications of poly(aspartic acid) (PASP)-based hydrogels. PASP is a synthetic acidic polypeptide that has drawn a great deal of attention in diverse applications due particularly to its biocompatibility and biodegradability. Facile modification of its precursor, poly(succinimide) (PSI), by primary amines has opened a wide window for the design of state-of-the-art hydrogels. Apart from pH-sensitivity, PASP hydrogels can be modified with suitable species in order to respond to the other desired stimuli such as temperature and reducing/oxidizing media as well. Strategies for fabrication of nanostructured PASP-based hydrogels in the form of particle and fiber are also discussed. Different cross-linking agents for PSI/PASP such as diamines, dopamine, cysteamine, and aminosilanes are also introduced. Finally, applications of PASP-based hydrogels in diverse areas particularly in biomedical are reviewed.

Thiolated polymers: Bioinspired polymers utilizing one of the most important bridging structures in nature

Thiolated polymers designated "thiomers" are obtained by covalent attachment of thiol functionalities on the polymeric backbone of polymers. In 1998 these polymers were first described as mucoadhesive and in situ gelling compounds forming disulfide bonds with cysteine-rich substructures of mucus glycoproteins and crosslinking through inter- and intrachain disulfide bond formation. In the following, it was shown that thiomers are able to form disulfides with keratins and membrane-associated proteins exhibiting also cysteine-rich substructures. Furthermore, permeation enhancing, enzyme inhibiting and efflux pump inhibiting properties were demonstrated. Because of these capabilities thiomers are promising tools for drug delivery guaranteeing a strongly prolonged residence time as well as sustained release on mucosal membranes. Apart from that, thiomers are used as drugs per se. In particular, for treatment of dry eye syndrome various thiolated polymers are in development and a first product has already reached the market. Within this review an overview about the thiomer-technology and its potential for different applications is provided discussing especially the outcome of studies in non-rodent animal models and that of numerous clinical trials. Moreover, an overview on product developments is given.

In Vitro 3D Cultures to Reproduce the Bone Marrow Niche

Over the past century, the study of biological processes in the human body has progressed from tissue culture on glass plates to complex 3D models of tissues, organs, and body systems. These dynamic 3D systems have allowed for more accurate recapitulation of human physiology and pathology, which has yielded a platform for disease study with a greater capacity to understand pathophysiology and to assess pharmaceutical treatments. Specifically, by increasing the accuracy with which the microenvironments of disease processes are modeled, the clinical manifestation of disease has been more accurately reproduced in vitro. The application of these models is crucial in all realms of medicine, but they find particular utility in diseases related to the complex bone marrow niche. Osteoblast, osteoclasts, bone marrow adipocytes, mesenchymal stem cells, and red and white blood cells represent some of cells that call the bone marrow microenvironment home. During states of malignant marrow disease, neoplastic cells migrate to and join this niche. These cancer cells both exploit and alter the niche to their benefit and to the patient's detriment. Malignant disease of the bone marrow, both primary and secondary, is a significant cause of morbidity and mortality today. Innovative study methods are necessary to improve patient outcomes. In this review, we discuss the evolution of 3D models and compare them to the preceding 2D models. With a specific focus on malignant bone marrow disease, we examine 3D models currently in use, their observed efficacy, and their potential in developing improved treatments and eventual cures. Finally, we comment on the aspects of 3D models that must be critically examined as systems continue to be optimized so that they can exert greater clinical impact in the future. © 2019 The Authors. JBMR Plus published by Wiley Periodicals, Inc. on behalf of American Society for Bone and Mineral Research.

Experimental Investigation of Damage Formation in Planar Fibrous Networks During Stretching

This paper presents the results of unidirectional strain-controlled experiments on fibrous electrospun networks used to study damage formation during elongation. The experimental loading curve shows a symmetrical parabolic type dependence at large scale and saw tooth-like force−extension behaviour at small scale. The damage formation was quantified by determining the number and the magnitude of abrupt force drops. The experiments evidenced that damage evolution is a consequence of strain induced random events. The frequency distribution of the number of damages as well as the magnitude of rupture force were represented by histograms. The results of the present study provide a better insight into damage tolerance and complex nonlinear tensile properties of electrospun networks. In addition, it could suggest a possible probabilistic approach to the fiber bundle model which has mainly motivated this study.