Influence of Surface Energy on Organic Alloy Formation in Ternary Blend Solar Cells Based on Two Donor Polymers

Origin of the Additive-Induced VOC Change in Non-Fullerene Organic Solar Cells

Additives are often used to adjust the morphology of the active layer to improve the performance of organic solar cells (OSCs). Here, taking typical high-efficiency non-fullerene systems as examples, the effect of the additive on the device performance in non-fullerene OSCs is systematically investigated. Surprisingly, an unpresented V_OC change is observed in the opposite direction of the two typical systems (PM6:Y6 and PTB7-Th: ITIC) appearing after the incorporation of the additive DIO, which can be affected by the morphological differences as indicated by the several morphological studies. The bewildering V_OC change caused by the additive in different material systems is supposed to originate from the different energy level variations as verified by the energy level studies. Molecular dynamic (MD) and density functional theory (DFT) calculations are also included to get an insight into the dynamic of the additive-induced morphological differences that are supposed to contribute to the energy level changes. Combining a series of morphological and energic studies as well as the theoretical calculations, the origin of unforeseeable V_OC changes caused by additives in non-fullerene OSCs is clarified, and provides in-depth insights into the effects of additives on device performance.

Donor-Acceptor Alternating Copolymer Compatibilizers for Thermally Stable, Mechanically Robust, and High-Performance Organic Solar Cells

Small-molecule acceptor (SMA)-based organic solar cells (OSCs) have achieved high power conversion efficiencies (PCEs), while their long-term stabilities remain to be improved to meet the requirements for real applications. Herein, we demonstrate the use of donor-acceptor alternating copolymer-type compatibilizers (DACCs) in high-performance SMA-based OSCs, enhancing their PCE, thermal stability, and mechanical robustness simultaneously. Detailed experimental and computational studies reveal that the addition of DACCs to polymer donor (P_D)-SMA blends effectively reduces P_D-SMA interfacial tensions and stabilizes the interfaces, preventing the coalescence of the phase-separated domains. As a result, desired morphologies with exceptional thermal stability and mechanical robustness are obtained for the P_D-SMA blends. The addition of 20 wt % DACCs affords OSCs with a PCE of 17.1% and a cohesive fracture energy (G_c) of 0.89 J m^-2, higher than those (PCE = 13.6% and G_c = 0.35 J m^-2) for the control OSCs without DACCs. Moreover, at an elevated temperature of 120 °C, the OSCs with 20 wt % DACC exhibit excellent morphological stability, retaining over 95% of the initial PCE after 300 h. In contrast, the control OSCs without the DACC rapidly degraded to below 60% of the initial PCE after 144 h.

Color- and Dimension-Tunable Light-Harvesting Organic Charge-Transfer Alloys for Controllable Photon-Transport Photonics

An electron donor/acceptor pair comprising perylene (Pe) and 9,10-dicyanoanthracene (DCA) was specifically designed to construct organic charge-transfer (CT) alloys via weak CT interaction through a solution co-assembly route. By adjusting the molar ratio between Pe and DCA, we achieve color- and dimension-tunable CT alloy assemblies involving one-dimensional (1D) (DCA)_1-x (Pe)_x (0 ≤ x ≤10 %) microribbons and two-dimensional (2D) (Pe)_1-y (DCA)_y (0 ≤ y ≤5 %) nanosheets as a consequence of energy transfer from DCA or α-Pe to Pe-DCA CT complex. Importantly, dimension-related optical waveguiding performances are also revealed: continuously adjustable optical loss in 1D (DCA)_1-x (Pe)_x microribbons and successive conversion from isotropic waveguide to anisotropic waveguide in 2D (Pe)_1-y (DCA)_y nanosheets. The present work provides a desired platform for in-depth investigation of light-harvesting organic CT alloy assemblies, which show promising applications in miniaturized optoelectronic devices.

Tuning the surface energies in a family of poly-3-alkylthiophenes bearing hydrophilic side-chains synthesized via direct arylation polymerization (DArP)

A family of Poly(3-alkylthiophene) copolymers bearing different functional groups was synthesized via direct arylation polymerization and the functional group impact on surface energy, crystallinity, and electronic properties was investigated.

Organic Photovoltaics with Multiple Donor-Acceptor Pairs

Compared with conventional organic solar cells (OSCs) based on single donor-acceptor pairs, terpolymer- and ternary-based OSCs featuring multiple donor-acceptor pairs are promising strategies for enhancing the performance while maintaining an easy and simple synthetic process. Using multiple donor-acceptor pairs in the active layer, the key photovoltaic parameters (i.e., short-circuit current density, open-circuit voltage, and fill factor) governing the OSC characteristics can be simultaneously or individually improved by positive changes in light-harvesting ability, molecular energy levels, and blend morphology. Here, these three major contributions are discussed with the aim of offering in-depth insights in combined terpolymers and ternary systems. Recent exemplary cases of OSCs with multiple donor-acceptor pairs are summarized and more advanced research and perspectives for further developments in this field are highlighted.

Isomery-Dependent Miscibility Enables High-Performance All-Small-Molecule Solar Cells

Nonfullerene polymer solar cells develop quickly. However, nonfullerene small-molecule solar cells (NF-SMSCs) still show relatively inferior performance, attributing to the lack of comprehensive understanding of the structure-performance relationship. To address this issue, two isomeric small-molecule acceptors, NBDTP-F_out and NBDTP-F_in , with varied oxygen position in the benzodi(thienopyran) (BDTP) core are designed and synthesized. When blended with molecular donor BDT3TR-SF, devices based on the two isomeric acceptors show disparate photovoltaic performance. Fabricated with an eco-friendly processing solvent (tetrahydrofuran), the BDT3TR-SF:NBDTP-F_out blend delivers a high power conversion efficiency of 11.2%, ranked to the top values reported to date, while the BDT3TR-SF:NBDTP-F_in blend almost shows no photovoltaic response (0.02%). With detailed investigations on inherent optoelectronic processes as well as morphological evolution, this performance disparity is correlated to the interfacial tension of the two combinations and concludes that proper interfacial tension is a key factor for effective phase separation, optimal blend morphology, and superior performance, which can be achieved by the "isomerization" design on molecular acceptors. This work reveals the importance of modulating the materials miscibility by interfacial-tension-oriented molecular design, which provides a general guideline toward efficient NF-SMSCs.

Optimizing Photovoltaic Charge Generation of Hybrid Heterojunction Core-Shell Silicon Nanowire Arrays: An FDTD Analysis

Development of highly efficient nanowire-based photovoltaic devices requires an accurate modeling of light scattering from interfaces and optical carrier generation inside the cell. A comprehensive study of optical absorption and carrier generation enables us to tap the full potential of nanowire arrays (NWAs). In this study, we have done a systematic study to optimize the core-shell structure of vertically aligned silicon nanowire (Si NW) arrays coated with PTB7:PC₇₁BM by means of finite difference time domain optical simulations to maximize the photon absorption. Initially, the core thickness of hybrid Si NWs has been optimized for the most efficient light absorption. The further improvement of light absorption has been studied by varying the coating thickness of low-band gap organic polymer PTB7:PC₇₁BM on Si NWAs. A delineative analysis shows that NWs with a 150 nm thick silicon core and 60 nm thick coating of PTB7:PC₇₁BM exhibit broad band absorption and the optimum ideal current density of about 34.95 mA/cm², which are larger than those of their planar counterpart with the same amount of absorbing material and also better than those previously reported for NWs. The basic principle and the physical process taking place during absorption and current generation have been also discussed. The optimization of the hybrid heterojunction Si NW arrays and understanding of their optical characteristics may contribute to the development of economical and highly efficient hybrid solar cells.

Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells

The bulk-heterojunction blend of an electron donor and an electron acceptor material is the key component in a solution-processed organic photovoltaic device. In the past decades, a p-type conjugated polymer and an n-type fullerene derivative have been the most commonly used electron donor and electron acceptor, respectively. While most advances of the device performance come from the design of new polymer donors, fullerene derivatives have almost been exclusively used as electron acceptors in organic photovoltaics. Recently, nonfullerene acceptor materials, particularly small molecules and oligomers, have emerged as a promising alternative to replace fullerene derivatives. Compared to fullerenes, these new acceptors are generally synthesized from diversified, low-cost routes based on building block materials with extraordinary chemical, thermal, and photostability. The facile functionalization of these molecules affords excellent tunability to their optoelectronic and electrochemical properties. Within the past five years, there have been over 100 nonfullerene acceptor molecules synthesized, and the power conversion efficiency of nonfullerene organic solar cells has increased dramatically, from ∼2% in 2012 to >13% in 2017. This review summarizes this progress, aiming to describe the molecular design strategy, to provide insight into the structure-property relationship, and to highlight the challenges the field is facing, with emphasis placed on most recent nonfullerene acceptors that demonstrated top-of-the-line photovoltaic performances. We also provide perspectives from a device point of view, wherein topics including ternary blend device, multijunction device, device stability, active layer morphology, and device physics are discussed.

Highly Efficient Ternary-Blend Polymer Solar Cells Enabled by a Nonfullerene Acceptor and Two Polymer Donors with a Broad Composition Tolerance

In this work, highly efficient ternary-blend organic solar cells (TB-OSCs) are reported based on a low-bandgap copolymer of PTB7-Th, a medium-bandgap copolymer of PBDB-T, and a wide-bandgap small molecule of SFBRCN. The ternary-blend layer exhibits a good complementary absorption in the range of 300-800 nm, in which PTB7-Th and PBDB-T have excellent miscibility with each other and a desirable phase separation with SFBRCN. In such devices, there exist multiple energy transfer pathways from PBDB-T to PTB7-Th, and from SFBRCN to the above two polymer donors. The hole-back transfer from PTB7-Th to PBDB-T and multiple electron transfers between the acceptor and the donor materials are also observed for elevating the whole device performance. After systematically optimizing the weight ratio of PBDB-T:PTB7-Th:SFBRCN, a champion power conversion efficiency (PCE) of 12.27% is finally achieved with an open-circuit voltage (V_oc ) of 0.93 V, a short-circuit current density (J_sc ) of 17.86 mA cm^-2 , and a fill factor of 73.9%, which is the highest value for the ternary OSCs reported so far. Importantly, the TB-OSCs exhibit a broad composition tolerance with a high PCE over 10% throughout the whole blend ratios.

High-Performance Furan-Containing Conjugated Polymer for Environmentally Benign Solution Processing

Developing semiconducting polymers that exhibit both strong charge transport capability via highly ordered structures and good processability in environmentally benign solvents remains a challenge. Given that furan-based materials have better solubility in various solvents than analogous thiophene-based materials, we have synthesized and characterized furanyl-diketopyrrolopyrrole polymer (PFDPPTT-Si) together with its thienyl-diketopyrrolopyrrole-based analogue (PTDPPTT-Si) to understand subtle changes induced by the use of furan instead of thiophene units. PTDPPTT-Si films processed in common chlorinated solvent exhibit a higher hole mobility (3.57 cm² V^-1 s^-1) than PFDPPTT-Si films (2.40 cm² V^-1 s^-1) under the same conditions; this greater hole mobility is a result of tightly aggregated π-stacking structures in PTDPPTT-Si. By contrast, because of its enhanced solubility, PFDPPTT-Si using chlorine-free solution processing results in a device with higher mobility (as high as 1.87 cm² V^-1 s^-1) compared to that of the corresponding device fabricated using PTDPPTT-Si. This mobility of 1.87 cm² V^-1 s^-1 represents the highest performances among furan-containing polymers reported to the best of our knowledge for nonchlorinated solvents. Our study demonstrates an important step toward environmentally compatible electronics, and we expect the results of our study to reinvigorate the furan-containing semiconductors field.

Enhanced Photovoltaic Properties of Bulk Heterojunction Organic Photovoltaic Devices by an Addition of a Low Band Gap Conjugated Polymer

In this study, we fabricated organic photovoltaics (OPVs) by introducing the polymer additive HTh6BT into the photoactive layer of a poly(3-hexylthiophene):phenyl-C₆₁-butyric acid methyl ester (P3HT:PCBM) system. The HTh6BT had a relatively low band gap energy of 1.65 eV and a molecular and crystalline structure similar to that of P3HT. In the photoactive layer, the HTh6BT and P3HT can both act as donors. In such parallel-type bulk heterojunctions, each donor can form excitons and generate charges while being separated from the donor/acceptor interface. Changes in the photovoltaic property of the OPV device by the addition of HTh6BT were evaluated, and the optical characteristics of the photoactive layer, as well as the surface morphology, polymer ordering, and crystallinity of the P3HT:PCBM film were analyzed. Compared to a device without HTh6BT, all short-circuit current densities, open-circuit voltages, and fill factors were enhanced, leading to the enhancement of the power conversion efficiency by 36%.