Improving Surface Adsorption via Shape Control of Hematite α-Fe2O3 Nanoparticles for Sensitive Dopamine Sensors

Engineering FeOOH/Fe2O3@Carbon Interfaces With Biomass-Derived Carbon Nanodot/Iron Colloids for Efficient Redox-Modulated Dopamine Voltammetric Detection

The Fe2+/Fe3+ redox couple is effective for voltammetric detection of trace dopamine (DA). However, achieving adequate concentrations with high electroactive surface area (ECSA), DA affinity, and fast interfacial charge transfer is challenging. Consequently, most reported Fe-based sensors have a high nanomolar range detection limit (LOD). Herein, we address these limitations by manipulating the phase and morphology of FeOOH/Fe2O3 heterojunctions anchored on sp2-carbon. FeOOH/Fe2O3 is synthesized by variable temperature aging of unique Fe5H9O15/Fe2O3@sp2-carbon colloidal nanoparticles, which form via chelation between biomass-derived carbon nanodots (CNDs) and Fe2+ ions. At 27 °C and 120 °C, Fe5H9O15/Fe2O3@sp2-carbon transforms into β-FeOOH/Fe2O3 nanoparticles and α-FeOOH/Fe2O3 nanosheet, respectively. The β-FeOOH/Fe2O3 interface exhibits higher eg orbital electron occupancy than α-FeOOH/Fe2O3, thereby facilitating oxygen adsorption and the generation of Fe2+/Fe3+ sites near the polarization potential of DA. This facilitates interfacial electron transfer between Fe3+ and DA. Moreover, its nanoparticle morphology enhances ECSA and DA adsorption compared to α-FeOOH/Fe2O3 nanosheets. With a LOD of ~3.11 nM, β-FeOOH/Fe2O3 surpasses the lower threshold in humans (~10 nM) and matches noble-metal sensors. Furthermore, it exhibits selective detection of DA over 10 biochemicals in urine. Therefore, the β-FeOOH/Fe2O3@sp2-C platform holds promise as a low-cost, easy-to-synthesize, and practical voltammetric DA monitor.

1-D Carbon Nano-Coils Derived from Almond Skin: Exhibiting Density of State, Diffusivity, Electron Transfer Rate, and Dopamine Redox Modulation Properties Akin to Graphene Oxide

The quest to develop graphene-like biomass-carbon for advanced biomolecule redox modulation and sensing remains a challenge. The primary obstacle is the limited ability of biomass to undergo extensive graphitization during pyrolysis resulting in the formation of amorphous carbon materials with a small carbon-double-bond-carbon domain size (Lsp2), density of state (LDOS), ion diffusivity (D), and electron transfer rate constant (Ks). Herein, using almond skin (AS) the morphology of biomass is demonstrated as the key to overcoming these limitations. AS consists of 1D syringyl/guaiacyl lignin nano-coils which under H2/H2 annealing transform into pyrolytic 1D carbon nano-coils (r-gC). Spectroscopy and microscopy analyses reveal that the sheet layering structure, crystallinity, LDOS, and Lsp2 of r-gC mimic those of graphene oxide (GO). Moreover, its unique 1D morphology and profound microstructure facilitate faster charge transfer and ion diffusion than GO's planar structure, leading to better redox modulation and sensing of the neurotransmitter dopamine (DA) in physiological fluids. r-gC's DA detection limit of 3.62 nM is below the lower threshold found in humans and on par with the state-of-the-art. r-gC is also DA-selective over 14 biochemicals. This study reveals that biomasses with well-defined and compact lignin structures are best suited for developing highly electroactive graphene-like biomass carbon.

Effects of surfactants on the adsorption of norfloxacin onto ferrihydrite: comparison between anionic and cationic surfactants

There is little information on how widespread surfactants affect the adsorption of norfloxacin (NOR) onto iron oxide minerals. In order to elucidate the effects of various surfactants on the adsorption characteristics of NOR onto typical iron oxides, we have explored the different influences of sodium dodecylbenzene sulfonate (SDBS), an anionic surfactant, and didodecyldimethylammonium bromide (DDAB), a cationic surfactant, on the interactions between NOR and ferrihydrite under different solution chemistry conditions. Interestingly, SDBS facilitated NOR adsorption, whereas DDAB inhibited NOR adsorption. The adsorption-enhancement effect of SDBS was ascribed to the enhanced electrostatic attraction, the interactions between the adsorbed SDBS on ferrihydrite surfaces and NOR molecules, and the bridging effect of SDBS between NOR and iron oxide. In comparison, the adsorption-inhibition effect of DDAB owning to the adsorption site competitive adsorption between NOR and DDAB for the effective sites as well as the steric hindrance between NOR-DDAB complexes and the adsorbed DDAB on ferrihydrite surfaces. Additionally, the magnitude of the effects of surfactants on NOR adsorption declined with increasing pH values from 5.0 to 9.0, which was related to the amounts of surfactant binding to ferrihydrite surfaces. Moreover, when the background electrolyte was Ca2+, the enhanced effect of SDBS on NOR adsorption was caused by the formation of NOR-Ca2+-SDBS complexes. The inhibitory effect of DDAB was due to the DDAB coating on ferrihydrite, which undermined the cation-bridging effect. Together, the findings from this work emphasize the essential roles of widely existing surfactants in controlling the environmental fate of quinolone antibiotics.

FeCx-coated biochar nanosheets as efficient bifunctional catalyst for electrochemical detection and reduction of 4-nitrophenol

Herein, we present the exceptional performance of FeCx-coated carbon sheets (FC) derived from the pyrolysis of waste biomass as a bifunctional catalyst for electrochemical detection and catalytic reduction of 4-nitrophenol (4-NP). Despite having a lower surface area, larger particle size, and lesser N content, the FC material prepared at a calcination temperature of 900 °C (FC900) outperforms the other samples. Deeper investigations revealed that the FC900 efficiently facilitates the charge transfer process and enhances the diffusion rate of 4-NP, leading to increased surface coverage of 4-NP on the surface of FC900. Additionally, relatively weaker interactions between 4-NP and FC900 allow the facile adsorption and desorption of reaction intermediates. Due to the synergetic interplay of these factors, FC900 exhibited a linear response to changes in 4-NP concentration from 1 μM to 100 μM with a low limit of detection (LOD) of 84 nM (S/N = 3) and high sensitivity of 12.15 μA μM-1 cm-2. Importantly, it selectively detects 4-NP in the presence of five times more concentrated 2-aminophenol, 4-aminophenol, catechol, resorcinol, and hydroquinone and ten times more concentrated metal salts such as Na2SO4. NaNO3, KCl, CuCl2, and CaCl2. Moreover, FC900 can accurately detect micromolar levels of 4-NP in river water with high recovery values (99.8-103.5 %). In addition, FC900 exhibited outstanding catalytic activity in reducing 4-NP to 4-aminophenol (4-AP), achieving complete conversion within 8 min with a high-rate constant of 0.42 min-1. FC900 also shows high recyclability in six consecutive catalytic reactions due to Fe magnetic property.

A room-temperature formaldehyde sensor based on hematite for breast cancer diagnosis

Formaldehyde (HCHO) is regarded as one kind of indoor pollutant. Additionally, HCHO serves as a biomarker in the exhaled breath of breast cancer patients. Early warning and management are crucial for the environment and human health. Thus, we have elaborately synthesized hematite (α-Fe₂O₃) employing a facet-engineering hydrothermal strategy using the fine-tuned solvent composition, with special attention to the effect of different exposed surfaces on HCHO detection. The spindle-like α-Fe₂O₃ nanocrystals with the (012) facet exposed exhibited impressively higher response towards HCHO at room temperature than that of the disk-like α-Fe₂O₃ with mainly the (001) facet exposed, partly due to the abundant vacancy oxygen and adsorbed oxygen of high-index facets of α-Fe₂O₃. More importantly, our experimental results coincide with theoretical calculations. Overall, the surface engineering strategy could be extended to a versatile approach for HCHO detection.

Nickel -doped iron oxide nanoparticle-conjugated porphyrin interface (porphyrin/Fe2O3@Ni) for the non-enzymatic detection of dopamine from lacrimal fluid

Herein, we synthesized nickel (Ni)-doped iron oxide nanoparticles (Fe₂O₃). The presence of the dopant afforded anchoring sites for the porphyrinic hetero cavity of 5,10,15,20-(tetra-4-carboxyphenyl)porphyrin to produce the porphyrin/Fe₂O₃@Ni composite. The crystalline structure and morphology of porphyrin/Fe₂O₃@Ni were assessed using various tools including Fourier transform spectroscopy (FTIR), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) and Raman spectroscopy. Porphyrin/Fe₂O₃@Ni has proven to be an excellent dopamine (DA) probe material with good selectivity, reproducibility, stability and reliability owing to its clever morphology, which induces numerous active sites along with good active surface area. It consequently provides good accessibility to DA and allows for the smooth tunneling of electrons between the analyte and sensing interface. Meanwhile, the porphyrin molecules provide good carbon-based resilient support, inhibit the leaching of the electrode matrix and enhance electron shuttling, resulting in the robust oxidation of DA with amplified transduction signals. The designed porphyrin/Fe₂O₃@Ni interface showed a low detection limit (1.2 nm) with good sensitivity (1.2 nM) in the linear bounds of 10 μM to 3500 μM. Additionally, the interface was employed successfully to analyze DA from lacrimal fluid with good percentage recoveries (99.8% to 100.1%). We anticipate that such a design will simplify the in vitro screening of DA in rarely studied tear samples with sensitivity and selectivity.

A template-free assembly of Cu,N-codoped hollow carbon nanospheres as low-cost and highly efficient peroxidase nanozymes

Utilizing Cu2+-coordinated poly(m-phenylenediamine) as the precursor, Cu,N-codoped hollow carbon nanospheres as low-cost and highly efficient peroxidase nanozymes were assembled through a template-free strategy for the first time.

A simple one-step electrochemical deposition of bioinspired nanocomposite for the non-enzymatic detection of dopamine

A simple and cost-effective electrochemical synthesis of carbon-based nanomaterials for electrochemical biosensor is of great challenge these days. Our study describes a single-step electrochemical deposition strategy to prepare a nanocomposite of electrochemically reduced graphene oxide (ErGO), multi-walled carbon nanotubes (MWCNTs), and polypyrrole (PPy) in an aqueous solution of pH 7.0 for dopamine (DA) detection. The ErGO/MWCNTs/PPy nanocomposites show enhanced electrochemical performance due to the strong π–π* stacking interactions among ErGO, MWCNTs, and PPy. The efficient interaction of the nanocomposites is confirmed by evaluating its physical and electrochemical characteristics using field-emission scanning electron microscopy, Raman spectroscopy, electrochemical impedance spectroscopy, cyclic voltammetry, and amperometry. The deposited nanocomposites are highly stable on the substrates and possess high surface areas, which is vital to improve the sensitivity and selectivity for DA detection. The controlled deposition of the ErGO/MWCNTs/PPy nanocomposites can provide enhanced electrochemical detection of DA. The sensor demonstrates a short time response within 2 s and is a highly sensitive approach for DA detection with a dynamic linear range of 25–1000 nM (R2 = 0.999). The detection limit is estimated to be 2.3 nM, and the sensor sensitivity is calculated to be 8.96 μA μM−1 cm−2, with no distinct responses observed for other biological molecules.

Bio-assisted preparation of efficiently architectured nanostructures of γ-Fe2O3 as a molecular recognition platform for simultaneous detection of biomarkers

Magnetic nanoparticles of iron oxide (γ-Fe2O3) have been prepared using bio-assisted method and their application in the field of biosensors is demonstrated. Particularly in this work, different nanostructures of γ-Fe2O3 namely nanospheres (NS), nanograsses (NG) and nanowires (NW) are prepared using a bio-surfactant namely Furostanol Saponin (FS) present in Fenugreek seeds extract through co-precipitation method by following "green" route. Three distinct morphologies of iron oxide nanostructures possessing the same crystal structure, magnetic properties, and varied size distribution are prepared and characterized. The resultant materials are analyzed using field emission scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, vibrating sample magnetometer and Fourier transform infrared spectroscopy. Moreover, the effect of reaction time and concentration of FS on the resultant morphologies of γ-Fe2O3 nanostructures are systematically investigated. Among different shapes, NWs and NSs of γ-Fe2O3 are found to exhibit better sensing behaviour for both the individual and simultaneous electrochemical detection of most popular biomarkers namely dopamine (DA) and uric acid (UA). Electrochemical studies reveal that γ-Fe2O3 NWs showed better sensing characteristics than γ-Fe2O3 NSs and NGs in terms of distinguishable voltammetric signals for DA and UA with enhanced oxidation current values. Differential pulse voltammetric studies exhibit linear dependence on DA and UA concentrations in the range of 0.15-75 µM and 5 μM - 0.15 mM respectively. The detection limit values for DA and UA are determined to be 150 nM and 5 µM. In addition γ-Fe2O3 NWs modified electrode showed higher sensitivity, reduced overpotential along with good selectivity towards the determination of DA and UA even in the presence of other common interferents. Thus the proposed biosensor electrode is very easy to fabricate, eco-friendly, cheaper and possesses higher surface area suggesting the unique structural patterns of γ-Fe2O3 nanostructures to be a promising candidate for electrochemical bio-sensing and biomedical applications.

Nanoscale dynamic chemical, biological sensor material designs for control monitoring and early detection of advanced diseases

Early detection and easy continuous monitoring of emerging or re-emerging infectious, contagious or other diseases are of particular interest for controlling healthcare advances and developing effective medical treatments to reduce the high global cost burden of diseases in the backdrop of lack of awareness regarding advancing diseases. Under an ever-increasing demand for biosensor design reliability for early stage recognition of infectious agents or contagious diseases and potential proteins, nanoscale manufacturing designs had developed effective nanodynamic sensing assays and compact wearable devices. Dynamic developments of biosensor technology are also vital to detect and monitor advanced diseases, such as human immunodeficiency virus (HIV), hepatitis B virus (HBV), hepatitis C virus (HCV), diabetes, cancers, liver diseases, cardiovascular diseases (CVDs), tuberculosis, and central nervous system (CNS) disorders. In particular, nanoscale biosensor designs have indispensable contribution to improvement of health concerns by early detection of disease, monitoring ecological and therapeutic agents, and maintaining high safety level in food and cosmetics. This review reports an overview of biosensor designs and their feasibility for early investigation, detection, and quantitative determination of many advanced diseases. Biosensor strategies are highlighted to demonstrate the influence of nanocompact and lightweight designs on accurate analyses and inexpensive sensing assays. To date, the effective and foremost developments in various nanodynamic designs associated with simple analytical facilities and procedures remain challenging. Given the wide evolution of biosensor market requirements and the growing demand in the creation of early stage and real-time monitoring assays, precise output signals, and easy-to-wear and self-regulating analyses of diseases, innovations in biosensor designs based on novel fabrication of nanostructured platforms with active surface functionalities would produce ​remarkable biosensor devices. This review offers evidence for researchers and inventors to focus on biosensor challenge and improve fabrication of nanobiosensors to revolutionize consumer and healthcare markets.

Nanohybrids of shuttle-like α-Fe2O3 nanoparticles and nitrogen-doped graphene for simultaneous voltammetric detection of dopamine and uric acid

Shuttle-like α-Fe₂O₃ nanoparticles and nitrogen-doped graphene nanocomposites as a low cost and efficient electrocatalyst for detecting dopamine and uric acid.

A facile synthesis of novel ε-Fe2O3 grafted 2D h-BN nanostructures for enhanced visible active photocatalytic applications

Solvothermally synthesized h-BN/ε-Fe₂O₃ nanocomposite catalyst exhibited enhanced photocatalytic activity compared to bare h-BN and c-BN catalysts.

Nanohybrids of Pt-Functionalized Al2O3/ZnO Core-Shell Nanorods for High-Performance MEMS-Based Acetylene Gas Sensor

Metal oxide nanostructures are the most promising materials for the fabrication of advanced gas sensors. However, the main challenge of these gas sensors is humidity interference and issues related to the selectivity and high operating temperature, which limits their response in real-time applications. In this study, we proposed nanohybrids of Pt-functionalized Al₂O₃/ZnOcore-shell nanorods (NRs) for a real-time humidity-independent acetylene gas sensor. The core ZnO NRs have been fabricated on microelectromechanical system (MEMS) microheater, followed by a coating of a thin nanoscale moisture-blocking conformal Al₂O₃ shell by atomic layer deposition (ALD) and decoration of Pt NPs using photochemical deposition and e-beam evaporation. Prior to the fabrication, a COMSOL simulation was performed to optimize the microheater design and moisture-blocking layer thickness. A comparative study of the decoration of Pt NPs on the ZnO surface by photochemical (s-Pt/ZnO) and e-beam evaporation (e-Pt/ZnO) and a Al₂O₃ thin moisture-blocking shell layer (Pt/Al₂O₃/ZnO) in sensor response has been conducted. The fabricated sensors (s-Pt/ZnO) and (e-Pt/ZnO) showed a high response ΔR/R (%) of 96.46% and 68.15% to 200 ppm acetylene at 120 °C and detect trace concentrations of acetylene down to 1 ppm, but the response is influenced by humidity. Moreover, the sensor (Pt/Al₂O₃/ZnO) exhibited nearly the same sensing characteristics and high acetylene selectivity despite the wide range of humidity variation from 20% RH to 70% RH. The Pt-functionalized Al₂O₃/ZnOcore-shell NR-based sensor showed better sensing and stable performance than other sensors (s-Pt/ZnO and e-Pt/ZnO) under humidity conditions.

Morphology-Dependent Electrochemical Sensing Properties of Iron Oxide-Graphene Oxide Nanohybrids for Dopamine and Uric Acid

Various morphologies of iron oxide nanoparticles (Fe2O3 NPs), including cubic, thorhombic and discal shapes were synthesized by a facile meta-ion mediated hydrothermal route. To further improve the electrochemical sensing properties, discal Fe2O3 NPs with the highest electrocatalytic activity were coupled with graphene oxide (GO) nanosheets. The surface morphology, microstructures and electrochemical properties of the obtained Fe2O3 NPs and Fe2O3/GO nanohybrids were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. As expected, the electrochemical performances were found to be highly related to morphology. The discal Fe2O3 NPs coupled with GO showed remarkable electrocatalytic activity toward the oxidation of dopamine (DA) and uric acid (UA), due to their excellent synergistic effect. The electrochemical responses of both DA and UA were linear to their concentrations in the ranges of 0.02-10 μM and 10-100 μM, with very low limits of detection (LOD) of 3.2 nM and 2.5 nM for DA and UA, respectively. Moreover, the d-Fe2O3/GO nanohybrids showed good selectivity and reproducibility. The proposed d-Fe2O3/GO/GCE realized the simultaneous detection of DA and UA in human serum and urine samples with satisfactory recoveries.

Bioresorbable Silicon Nanomembranes and Iron Catalyst Nanoparticles for Flexible, Transient Electrochemical Dopamine Monitors

A strategy of materials synthesis, characteristic evaluations, and manufacturing process for a mechanically elastic, biologically safe silicon-based dopamine detector that is designed to be completely transient, i.e., dissolved in water and/or biofluids, potentially in the brain after a desired period of operation, is introduced. Use of inexpensive, bioresorbable iron (Fe)-based nanoparticles (NPs) is one of the attractive choices for efficient catalytic oxidation of dopamine as an alternative for noble, nontransient platinum (Pt) nanoparticles, based on extensive studies of synthesized materials and catalytic reactions. Arrays of transient dopamine sensors validate electrochemical functionality to determine physiological levels of dopamine and to selectively sense dopamine in a variety of neurotransmitters, illuminating feasibilities for a higher level of soft, transient electronic implants integrated with other components of overall system.

NiO/NiCo2O4 Truncated Nanocages with PdO Catalyst Functionalization as Sensing Layers for Acetone Detection

Achieving a novel structural construction and adopting appropriate catalyst materials are key to overcoming inherent limitations of gas sensors in terms of designing sensing layers. This work introduces NiO/NiCo₂O₄ truncated nanocages functionalized with PdO nanoparticles, which were proved to possess the ability of effective acetone detection. The device realized an enhanced acetone-sensing sensitivity, together with excellent selectivity and long-term stability. The sensing performance is far better than sensors based on NiO/NiCo₂O₄ solid nanocubes and NiO/NiCo₂O₄ truncated nanocages without PdO decorating, which is related to cooperative effects of the high specific surface area and efficient catalytic activity. The results provide promising metal-organic frameworks (MOFs)-derived material with the optimization of catalytic performance, demonstrating the remarkable potential for acetone sensors.

Morphologically Tunable MnO2 Nanoparticles Fabrication, Modelling and Their Influences on Electrochemical Sensing Performance toward Dopamine

The morphology or shape of nanomaterials plays an important role in functional applications, especially in the electrochemical sensing performance of nanocomposites modified electrodes. Herein, the morphology-dependent electrochemical sensing properties of MnO2-reduced graphene oxide/glass carbon electrode (MnO2-RGO/GCE) toward dopamine detection were investigated. Firstly, various morphologies of nanoscale MnO2, including MnO2 nanowires (MnO2 NWs), MnO2 nanorods (MnO2 NRs), and MnO2 nanotubes (MnO2 NTs), were synthesized under different hydrothermal conditions. Then the corresponding MnO2-RGO/GCEs were fabricated via drop-casting and the subsequent electrochemical reduction method. The oxidation peak currents increase with the electrochemical activity area following the order of MnO2 NWs-RGO/GCE, MnO2 NTs-RGO/GCE, and MnO2 NRs-RGO/GCE. The spatial models for MnO2 NWs, MnO2 NTs, and MnO2 NRs are established and accordingly compared by their specific surface area, explaining well the evident difference in electrochemical responses. Therefore, the MnO2 NWs-RGO/GCE is selected for dopamine detection due to its better electrochemical sensing performance. The response peak current is found to be linear with dopamine concentration in the range of 8.0 × 10−8 mol/L–1.0 × 10−6 mol/L and 1.0 × 10−6 mol/L–8.0 × 10−5 mol/L with a lower detection limit of 1 × 10−9 mol/L (S/N = 3). Finally, MnO2 NWs-RGO/GCE is successfully used for the determination of dopamine injection samples, with a recovery of 99.6–103%. These findings are of great significance for understanding the relationship between unlimited nanoparticle structure manipulation and performance improvement.

Protein-templated Fe2O3 microspheres for highly sensitive amperometric detection of dopamine

The authors describe an amperometric sensor for dopamine (DA) by employing olive-like Fe₂O₃ microspheres (OFMs) as the electrocatalyst for DA oxidization. The OFMs were prepared by using a protein templated method. The structure and properties of the OFMs were characterized by scanning electron microscopy, X-ray powder diffraction, energy dispersive x-ray spectroscopy, cyclic voltammetry and electrochemical impedance spectroscopy. The OFMs possess excellent catalytic activity towards DA oxidization due to their unique morphology. The sensor responds to DA within less than 5 s. The sensor, best operated at a voltage of +0.2 V (vs. SCE) responds linearly in the 0.2 to 115 μM DA concentration range and has a 30 nM detection limit. The selectivity, reproducibility and long-term stability of the sensor are acceptable. It performs well when applied to spiked human urine samples. Graphical abstract Olive-like Fe₂O₃ microspheres (OFMs), synthesized using egg white as template, display excellent catalytic activity towards dopamine (DA) oxidization due to their unique morphology. They were applied for DA detection using the amperometric technique. The electrochemical sensor exhibited a high sensitivity and a 30 nM detection limit. DAQ: dopaquinone.

Enhanced Gas Sensitivity and Sensing Mechanism of Network Structures Assembled from α-Fe2O3 Nanosheets with Exposed {104} Facets

Network structures assembled from α-Fe₂O₃ nanosheets with exposed {104} facets were successfully prepared by heating Fe(NO₃)₃ solution containing polyvinylpyrrolidone (PVP) in air. The α-Fe₂O₃ nanosheet-based network structures demonstrate significantly higher response to ethanol and triethylamine than α-Fe₂O₃ commercial powders. The excellent sensing performances can be ascribed to the exposed (104) facet terminated with Fe atoms. A concept of the unsaturated Fe atoms serving as the sensing reaction active sites is thus proposed, and the sensing reaction mechanism is described at the atomic and molecular level for the first time in detail. The concept of the surface metal atoms with dangling bonds serving as active sites can deepen understanding of the sensing and other catalytic reaction mechanisms and provides new insight into the design and fabrication of highly efficient sensing materials, catalysts, and photoelectronic devices.

DNA Tetrahedral Nanostructure-Based Electrochemical miRNA Biosensor for Simultaneous Detection of Multiple miRNAs in Pancreatic Carcinoma

Specific and sensitive biomarker detection is essential to early cancer diagnosis. In this study, we demonstrate an ultrasensitive electrochemical biosensor with the ability to detect multiple pancreatic carcinoma (PC)-related microRNA biomarkers. By employing DNA tetrahedral nanostructure capture probes to enhance the detection sensitivity as well as a disposable 16-channel screen-printed gold electrode (SPGE) detection platform to enhance the detection efficiency, we were able to simultaneously detect four PC-related miRNAs: miRNA21, miRNA155, miRNA196a, and miRNA210. The detection sensitivity reached to as low as 10 fM. We then profiled the serum levels of the four miRNAs for PC patients and healthy individuals with our multiplexing electrochemical biosensor. Through the combined analyses of the four miRNAs, our results showed that PC patients could be discriminated from healthy controls with fairly high sensitivity. This multiplexing PCR-free miRNA detection sensor shows promising applications in early diagnosis of PC disease.