Antibacterial Activities of Graphene Oxide-Molybdenum Disulfide Nanocomposite Films

Emerging trends and future challenges of advanced 2D nanomaterials for combating bacterial resistance

The number of multi-drug-resistant bacteria has increased over the last few decades, which has caused a detrimental impact on public health worldwide. In resolving antibiotic resistance development among different bacterial communities, new antimicrobial agents and nanoparticle-based strategies need to be designed foreseeing the slow discovery of new functioning antibiotics. Advanced research studies have revealed the significant disinfection potential of two-dimensional nanomaterials (2D NMs) to be severed as effective antibacterial agents due to their unique physicochemical properties. This review covers the current research progress of 2D NMs-based antibacterial strategies based on an inclusive explanation of 2D NMs' impact as antibacterial agents, including a detailed introduction to each possible well-known antibacterial mechanism. The impact of the physicochemical properties of 2D NMs on their antibacterial activities has been deliberated while explaining the toxic effects of 2D NMs and discussing their biomedical significance, dysbiosis, and cellular nanotoxicity. Adding to the challenges, we also discussed the major issues regarding the current quality and availability of nanotoxicity data. However, smart advancements are required to fabricate biocompatible 2D antibacterial NMs and exploit their potential to combat bacterial resistance clinically.

Nanofiber Graft Therapy to Prevent Shoulder Stiffness and Adhesions after Rotator Cuff Tendon Repair: A Comprehensive Review

Stiffness and adhesions following rotator cuff tears (RCTs) are common complications that negatively affect surgical outcomes and impede healing, thereby increasing the risk of morbidity and failure of surgical interventions. Tissue engineering, particularly through the use of nanofiber scaffolds, has emerged as a promising regenerative medicine strategy to address these complications. This review critically assesses the efficacy and limitations of nanofiber-based methods in promoting rotator cuff (RC) regeneration and managing postrepair stiffness and adhesions. It also discusses the need for a multidisciplinary approach to advance this field and highlights important considerations for future clinical trials.

Ultrathin TiS2@N,S-Doped Carbon Hybrid Nanosheets as Highly Efficient Photoresponsive Antibacterial Agents

Nanobactericides are employed as a promising class of nanomaterials for eradicating microbial infections, considering the rapid resistance risks of conventional antibiotics. Herein, we present a pioneering approach, reporting the synthesis of two-dimensional titanium disulfide nanosheets coated by nitrogen/sulfur-codoped carbon nanosheets (2D-TiS2@NSCLAA hybrid NSs) using a rapid l-ascorbic acid-assisted sulfurization of Ti3C2Tx-MXene to achieve efficient alternative bactericides. The as-developed materials were systematically characterized using a suite of different spectroscopy and microscopy techniques, in which the X-ray diffraction/Raman spectroscopy/X-ray photoelectron spectroscopy data confirm the existence of TiS2 and C, while the morphological investigation reveals single- to few-layered TiS2 NSs confined by N,S-doped C, suggesting the successful synthesis of the ultrathin hybrid NSs. From in vitro evaluation, the resultant product demonstrates impressive bactericidal potential against both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli bacteria, achieving a substantial decrease in the bacterial viability under a 1.2 J dose of visible-light irradiation at the lowest concentration of 5 μg·mL-1 compared to Ti3C2Tx (15 μg·mL-1), TiS2-C (10 μg·mL-1), and standard antibiotic ciprofloxacin (15 μg·mL-1), respectively. The enhanced degradation efficiency is attributed to the ultrathin TiS2 NSs encapsulated within heteroatom N,S-doped C, facilitating effective photogenerated charge-carrier separation that generates multiple reactive oxygen species (ROS) and induced physical stress as well as piercing action due to its ultrathin structure, resulting in multimechanistic cytotoxicity and damage to bacterial cells. Furthermore, the obtained results from molecular docking studies conducted via computational simulation (in silico) of the as-synthesized materials against selected proteins (β-lactamasE. coli/DNA-GyrasE. coli) are well-consistent with the in vitro antibacterial results, providing strong and consistent validation. Thus, this sophisticated study presents a simple and effective synthesis technique for the structural engineering of metal sulfide-based hybrids as functionalized synthetic bactericides.

Layer-by-layer Assembly of Nanosheets with Matching Size and Shape for More Stable Membrane Structure than Nanosheet-Polymer Assembly

Layer-by-layer (LbL) assembly of oppositely charged materials has been widely used as an approach to make two-dimensional (2D) nanosheet-based membranes, which often involves 2D nanosheets being alternately deposited with polymer-based polyelectrolytes to obtain an electrostabilized nanosheet-polymer structure. In this study, we hypothesized that using 2D nanosheets with matching physical properties as both polyanions and polycations may result in a more ordered nanostructure with better stability than a nanosheet-polymer structure. To compare the differences between nanosheet-nanosheet vs nanosheet-polymer structures, we assembled negatively charged molybdenum disulfide nanosheets (MoS2) with either positively charged graphene oxide (PrGO) nanosheets or positively charged polymer (PDDA). Using combined measurements by ellipsometer and quartz crystal microbalance with dissipation, we discovered that the swelling of MoS2-PrGO in ionic solutions was 60% lower than that of MoS2-PDDA membranes. Meanwhile, the MoS2-PrGO membrane retained its permeability upon drying, whereas the permeability of MoS2-PDDA decreased by 40% due to the restacking of MoS2. Overall, the MoS2-PrGO membrane demonstrated a better filtration performance. Additionally, our X-ray photoelectron spectroscopy results and analysis on layer density revealed a clearer transition in material composition during the LbL synthesis of MoS2-PrGO membranes, and the X-ray diffraction pattern suggested its resemblance to an ordered, layer-stacked structure. In conclusion, the MoS2-PrGO membrane made with nanosheets with matching size, shape, and charge density exhibited a much more aligned stacking structure, resulting in reduced membrane swelling under high salinity solutions, controlled restacking, and improved separation performance.

Study on synergistic mechanism of molybdenum disulfide/sodium carboxymethyl cellulose composite nanofiber mats for photothermal/photodynamic antibacterial treatment

Innovative antibacterial therapies using nanomaterials, such as photothermal (PTT) and photodynamic (PDT) treatments, have been developed for treating wound infections. However, creating secure wound dressings with these therapies faces challenges. The primary focus of this study is to prepare an antibacterial nanofiber dressing that effectively incorporates stable loads of functional nanoparticles and demonstrates an efficient synergistic effect between PTT and PDT. Herein, a composite nanofiber mat was fabricated, integrating spherical molybdenum disulfide (MoS2) nanoparticles. MoS2 was deposited onto polylactic acid (PLA) nanofiber mats using vacuum filtration, which was further stabilized by sodium carboxymethyl cellulose (CMC) adhesion and glutaraldehyde (GA) cross-linking. The composite nanofibers demonstrated synergistic antibacterial effects under NIR light irradiation, and the underlying mechanism was explored. They induce bacterial membrane permeability, protein leakage, and intracellular reactive oxygen species (ROS) elevation, ultimately leading to >95 % antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), which is higher than that of single thermotherapy (almost no antibacterial activity) or ROS therapy (about 80 %). In addition, the composite nanofiber mats exhibited promotion effects on infected wound healing in vivo. This study demonstrates the great prospects of composite nanofiber dressings in clinical treatment of bacterial-infected wounds.

Tailoring functional two-dimensional nanohybrids: A comprehensive approach for enhancing photocatalytic remediation

Photocatalysis is gaining prominence as a viable alternative to conventional biohazard treatment technologies. Two-dimensional (2D) nanomaterials have become crucial for fabricating novel photocatalysts due to their nanosheet architectures, large surface areas, and remarkable physicochemical properties. Furthermore, a variety of applications are possible with 2D nanomaterials, either in combination with other functional nanoparticles or by utilizing their inherent properties. Henceforth, the review commences its exploration into the synthesis of these materials, delving into their inherent properties and assessing their biocompatibility. Subsequently, an overview of mechanisms involved in the photocatalytic degradation of pollutants and the processes related to antimicrobial action is presented. As an integral part of our review, we conduct a systematic analysis of existing challenges and various types of 2D nanohybrid materials tailored for applications in the photocatalytic degradation of contaminants and the inactivation of pathogens through photocatalysis. This investigation will aid to contribute to the formulation of decision-making criteria and design principles for the next generation of 2D nanohybrid materials. Additionally, it is crucial to emphasize that further research is imperative for advancing our understanding of 2D nanohybrid materials.

Holotomography and atomic force microscopy: a powerful combination to enhance cancer, microbiology and nanotoxicology research

Modern imaging strategies are paramount to studying living systems such as cells, bacteria, and fungi and their response to pathogens, toxicants, and nanomaterials (NMs) as modulated by exposure and environmental factors. The need to understand the processes and mechanisms of damage, healing, and cell survivability of living systems continues to motivate the development of alternative imaging strategies. Of particular interest is the use of label-free techniques (microscopy procedures that do not require sample staining) that minimize interference of biological processes by foreign marking substances and reduce intense light exposure and potential photo-toxicity effects. This review focuses on the synergic capabilities of atomic force microscopy (AFM) as a well-developed and robust imaging strategy with demonstrated applications to unravel intimate details in biomedical applications, with the label-free, fast, and enduring Holotomographic Microscopy (HTM) strategy. HTM is a technique that combines holography and tomography using a low intensity continuous illumination laser to investigate (quantitatively and non-invasively) cells, microorganisms, and thin tissue by generating three-dimensional (3D) images and monitoring in real-time inner morphological changes. We first review the operating principles that form the basis for the complementary details provided by these techniques regarding the surface and internal information provided by HTM and AFM, which are essential and complimentary for the development of several biomedical areas studying the interaction mechanisms of NMs with living organisms. First, AFM can provide superb resolution on surface morphology and biomechanical characterization. Second, the quantitative phase capabilities of HTM enable superb modeling and quantification of the volume, surface area, protein content, and mass density of the main components of cells and microorganisms, including the morphology of cells in microbiological systems. These capabilities result from directly quantifying refractive index changes without requiring fluorescent markers or chemicals. As such, HTM is ideal for long-term monitoring of living organisms in conditions close to their natural settings. We present a case-based review of the principal uses of both techniques and their essential contributions to nanomedicine and nanotoxicology (study of the harmful effects of NMs in living organisms), emphasizing cancer and infectious disease control. The synergic impact of the sequential use of these complementary strategies provides a clear drive for adopting these techniques as interdependent fundamental tools.

Quaternary ammonium salts for water treatment with balanced rate of sterilization and degradation

The growing number of infections caused by drug-resistant bacteria which arise from the overuse of antibiotics has severely affected the normal operation of human society. The high antibacterial activity of QAS makes it promising as an alternative to antibiotics, but it suffers from secondary pollution due to its non-degradation. Here we have synthesized a class of gemini quaternary ammonium salts (GQAS) with different carbon chain lengths containing ester groups by using facile methylation reaction. Quaternary ammonium groups contribute to insert negatively charged bacterial membranes, resulting in membrane damage and bacteria death. Compared with conventional single-chain QAS, except for the more efficient antibacterial efficiency attribute to the presence of the second carbon chain, GQAS with alterable antibacterial properties can minimize the possibility of bacterial resistance and reduce the accumulation of GQAS in the environment through the introduction of degradable ester groups. GQAS is completely superior to the commercial bactericide benzalkonium chloride (BAC) in both antibacterial activity and degrade performance, which can be used as a more environmentally friendly bactericide.

Antibacterial Activity of Molybdenum Oxide-Polyacrylonitrile Composite Membrane with Fast Silver Ion Reduction

The development of hybrid composite antibacterial agents for wound dressing has garnered significant attention due to their remarkable antibacterial efficacy and their potential to mitigate microbial resistance. In this study, we present an approach to designing and fabricating wound dressing membranes, utilizing molybdenum oxide-polyacrylonitrile (MoO3/PAN) hybrid composites through electrospinning. Subsequently, we enhanced the membrane's effectiveness by introducing silver (Ag@MoO3/PAN) into the matrix via a rapid (within one min) green synthesis method under UV irradiation. Initially, we discuss the morphological characteristics and structural attributes of the resulting membranes. Subsequent investigations explore the antibacterial mechanisms of both MoO3 and Ag+, revealing that the incorporation of silver substantially enhanced antibacterial activity. Additionally, we elucidate the surface properties, noting that the introduction of silver increases the surface area of the composite membrane by 25.89% compared with the pristine MoO3/PAN membrane. Furthermore, we observe a 9% reduction in the water contact angle (WCA) for the Ag@MoO3/PAN membrane, indicating improved hydrophilicity. Finally, we analyze the release behavior of the Ag@MoO3/PAN membrane. Our findings demonstrate an initial burst release within the first 7 h, followed by a controlled and sustained release pattern over a period of 7 days.

2D-MoS2-supported copper peroxide nanodots with enhanced nanozyme activity: application in antibacterial activity

Peroxidase (POD)-like nanozymes are an upcoming class of new-generation antibiotics that are efficient for broad-spectrum antibacterial action. The POD-like activity employs the generation of reactive oxygen species (ROS), which have been utilized for bactericidal action. However, their intrinsic low catalytic activity and stability limit their bactericidal properties. In this study, we prepared a MoS2-based nanocomposite with copper peroxide nanodots (MoS2@CP) to achieve pH-dependent light-induced nanozyme-based antibacterial action. It has shown superior peroxidase and antibacterial activity at low pH. The mechanism behind the enhanced POD-like activity and high antibacterial activity was established. The mechanistic pathway involves estimating ROS generation, membrane depolarization, inner membrane permeabilization, metal ion release, and the effect of NIR on photothermal and photodynamic activities. Overall, our work highlighted the combinatorial approach for eradicating bacterial infections using enzyme-based antibacterial agents.

Hydrothermal integration of MoO2-MoS2@rGO nanoframe networks: A promising approach for efficient bacterial disinfection in wastewater

The efficient disinfection of bacterial contaminants in wastewater is a critical challenge in the field of environmental remediation. Herein, we present a novel approach for efficient bacterial disinfection using hydrothermally integrated MoO2-MoS2@rGO nanoframe networks. The developed nanoframe networks exhibit a unique architecture comprising of molybdenum dioxide (MoO2) and molybdenum disulfide (MoS2) impregnated on algae biomass reduced graphene oxide (rGO). The as-synthesized nanoframe networks demonstrate exceptional antibacterial activity against Escherichia coli bacteria. The disinfection efficiency was evaluated by measuring the bacterial viability and observing the morphological changes using scanning electron microscopy. The MoO2-MoS2@rGO nanoframe networks exhibited a remarkable antibacterial effect, achieving a high disinfection rate of 95.8% within a short contact time of 10 min. The efficient bacterial disinfection capability of the nanoframe networks can be attributed to the synergistic effects of MoO2, MoS2, and rGO components. The MoO2 nanoparticles generate reactive oxygen species (ROS), persuading oxidative stress and leading to bacterial inactivation. The MoS2 nanoparticles possess inherent antibacterial properties through the release of Mo and S ions. The rGO nanosheets provide a conductive and stable platform, facilitating the charge transfer during the antibacterial process. Furthermore, the hydrothermal integration method enables easy scalability and cost-effectiveness of the MoO2-MoS2@rGO nanoframe networks. The nanoframe networks can be easily recovered and reused, reducing waste generation and promoting sustainability. Overall, this study presents a promising approach for efficient bacterial disinfection in wastewater using hydrothermally integrated MoO2-MoS2@rGO nanoframe networks. The remarkable antibacterial performance, along with the advantages of scalability and reusability, makes these nanoframe networks a potential candidate for practical applications in environmental remediation and water treatment processes.

CuS@TA-Fe Nanoparticle-Doped Multifunctional Hydrogel with Peroxide-Like Properties and Photothermal Properties for Synergistic Antimicrobial Repair of Infected Wounds

Bacterial infection is a critical factor in wound healing. Due to the abuse of antibiotics, some pathogenic bacteria have developed resistance. Thus, there is an urgent need to develop a non-antibiotic-dependent multifunctional wound dressing for the treatment of bacteria-infected wounds. In this work, a multifunctional AOCuT hydrogel embedded with CuS@TA-Fe nanoparticles (NPs) through Schiff base reaction between gelatin quaternary ammonium salt - gallic acid (O-Gel-Ga) and sodium dialdehyde alginate (ADA) along with electrostatic interactions with CuS@TA-Fe NPs is prepared. These composite hydrogels possess favorable injectability, rapid shape adaptation, electrical conductivity, photothermal antimicrobial activity, and biocompatibility. Additionally, the doped NPs not only impart fast self-healing properties and excellent adhesion performance to the hydrogels, but also provide excellent peroxide-like properties, enabling them to scavenge free radicals and exhibit anti-inflammatory and antioxidant capabilities via photothermal (PTT) and photodynamic (PDT) effects. In an S. aureus infected wound model, the composite hydrogel effectively reduces the expression level of wound inflammatory factors and accelerates collagen deposition, epithelial tissue, and vascular regeneration, thereby promoting wound healing. This safe and synergistic therapeutic system holds great promise for clinical applications in the treatment of infectious wounds.

2D Nanomaterials and Their Drug Conjugates for Phototherapy and Magnetic Hyperthermia Therapy of Cancer and Infections

Photothermal therapy (PTT) and magnetic hyperthermia therapy (MHT) using 2D nanomaterials (2DnMat) have recently emerged as promising alternative treatments for cancer and bacterial infections, both important global health challenges. The present review intends to provide not only a comprehensive overview, but also an integrative approach of the state-of-the-art knowledge on 2DnMat for PTT and MHT of cancer and infections. High surface area, high extinction coefficient in near-infra-red (NIR) region, responsiveness to external stimuli like magnetic fields, and the endless possibilities of surface functionalization, make 2DnMat ideal platforms for PTT and MHT. Most of these materials are biocompatible with mammalian cells, presenting some cytotoxicity against bacteria. However, each material must be comprehensively characterized physiochemically and biologically, since small variations can have significant biological impact. Highly efficient and selective in vitro and in vivo PTTs for the treatment of cancer and infections are reported, using a wide range of 2DnMat concentrations and incubation times. MHT is described to be more effective against bacterial infections than against cancer therapy. Despite the promising results attained, some challenges remain, such as improving 2DnMat conjugation with drugs, understanding their in vivo biodegradation, and refining the evaluation criteria to measure PTT or MHT effects.

Three-dimensional label-free visualization of the interactions of PM2.5 with macrophages and epithelial cells using optical diffraction tomography

Particulate matter ≤ 2.5 µm (PM2.5) poses health risks related to various diseases and infections. However, the interactions between PM2.5 and cells such as uptake and cell responses have not been fully investigated despite advances in bioimaging techniques, because the heterogeneous morphology and composition of PM2.5 make it challenging to employ labeling techniques, such as fluorescence. In this work, we visualized the interaction between PM2.5 and cells using optical diffraction tomography (ODT), which provides quantitative phase images by refractive index distribution. Through ODT analysis, the interactions of PM2.5 with macrophages and epithelial cells, such as intracellular dynamics, uptake, and cellular behavior, were successfully visualized without labeling techniques. ODT analysis clearly shows the behavior of phagocytic macrophages and nonphagocytic epithelial cells for PM2.5. Moreover, ODT analysis could quantitatively compare the accumulation of PM2.5 inside the cells. PM2.5 uptake by macrophages increased substantially over time, but uptake by epithelial cells increased only marginally. Our findings indicate that ODT analysis is a promising alternative approach to visually and quantitatively understanding the interaction of PM2.5 with cells. Therefore, we expect ODT analysis to be employed to investigate the interactions of materials and cells that are difficult to label.

Ligand-Mediated Exfoliation and Antibacterial Activity of 2H Transition-Metal Dichalcogenides

Transition-metal dichalcogenides (TMDs) exists mainly in two polymorphs, namely, 1T (metallic) and 2H (semiconducting). To tailor the characteristics and practical utility of TMDs for different applications, functionalization is essential. In our earlier studies, we have shown that functionalized 1T and 2H MoS₂ exhibit exceptionally high antibacterial activity. The functionalization and related biological applications of other 1T (chemically exfoliated) TMDs were reported, but regarding other 2H TMDs, the functionalization and antibacterial activity are not explored yet. Hence, here we prepared functionalized 2H TMDs such as WS₂, WSe₂, and MoSe₂ other than MoS₂ by using a positively charged thiolate surfactant ligand. Further, functionalized 2H TMDs were utilized for antibacterial activity against Gram-positive and Gram-negative bacteria for a comparative antibacterial analysis. Interestingly, we found disparity in activity among the functionalized 2H TMDs, that is, MoS₂ shows higher activity than WS₂ followed by MoSe₂ and WSe₂. The intracellular reactive oxygen species measurement was found to be in the order MoS₂ > WS₂ > MoSe₂ > WSe₂, which is solely responsible for variation in the activity of functionalized TMDs. These results indicate that the easy functionalization of all types TMDs by using thiol ligand and importance of core material should be considered while designing functionalized material for specific applications.

Photonic double-network hydrogel dressings for antibacterial phototherapy and inflammation regulation in the general management of cutaneous regeneration

The treatment of festering pathogenic bacteria-induced skin wounds with increased inflammation is an ongoing challenge. The traditional antibacterial photothermal therapy always results in localized hyperthermia (over 50 °C), which inevitably delays tissue recovery. To address this serious issue, we devise a novel photonic hydrogel by integrating urchin-like Bi₂S₃ nano-heterojunctions (nano-HJs) into double-network hydrogels for infected skin regeneration. The synergy of NIR-triggered heat and ROS enables the hydrogels to achieve a rapid germicidal efficacy against bacteria within 15 min at mild temperature (below 50 °C). In vitro cell analysis results revealed that the photonic hydrogels exhibit superior cytocompatibility even after NIR illumination. More importantly, an in vivo study demonstrated that the photonic hydrogel dressings have a robust ability of accelerating contagious full-thickness wound regeneration through debriding abscesses, eliminating pathogens, improving collagen deposition, promoting angiogenesis, and adjusting the inflammation state. This photonic hydrogel system provides a general management strategy for the remedy of infectious wounds, where the incorporation of nano-HJs endows the hydrogels with the photodisinfection ability; in addition, the multifunctional hydrogels alleviate the damage from overwhelming heat towards surrounding tissues during phototherapy and steer the inflammation during the process of tissue regeneration. Accordingly, this work highlights the promising application of the photonic hydrogels in conquering refractory pathogen-invaded infection.

Environmentally sustainable implementations of two-dimensional nanomaterials

Rapid advancement in nanotechnology has led to the development of a myriad of useful nanomaterials that have novel characteristics resulting from their small size and engineered properties. In particular, two-dimensional (2D) materials have become a major focus in material science and chemistry research worldwide with substantial efforts centered on their synthesis, property characterization, and technological, and environmental applications. Environmental applications of these nanomaterials include but are not limited to adsorbents for wastewater and drinking water treatment, membranes for desalination, and coating materials for filtration. However, it is also important to address the environmental interactions and implications of these nanomaterials in order to develop strategies that minimize their environmental and public health risks. Towards this end, this review covers the most recent literature on the environmental implementations of emerging 2D nanomaterials, thereby providing insights into the future of this fast-evolving field including strategies for ensuring sustainable development of 2D nanomaterials.

A Nanocomposite with Extracellular Vesicles from Lactobacillus paracasei as a Bioinspired Nanoantibiotic Targeting Staphylococcus aureus

The utilization of biomimetic materials that merge functional nanoparticles (NPs) with a cell-derived nanosized membrane is a state-of-the-art approach to harnessing cellular properties for biomedical applications. However, the development of biocompatible and species-selective biomimetic agents against hazardous pathogens threatening human health is still in its early stages. Herein, we report the synthesis and functional analysis of a novel nanoplatform in which a PEGylated MoS2-ZnO (MZ) nanocomposite was cloaked with a generally regarded as safe (GRAS)-grade Lactobacillus paracasei-derived extracellular vesicle (LPEV) for MZ-LPEV nanocomposite and evaluated its activity against Staphylococcus aureus. The MZ nanocomposite was characterized via X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy. The coating of MZ with LPEV was confirmed through nanoparticle tracking analysis and zeta potential measurements. MZ-LPEV exhibited 5- to 20-fold higher antibacterial activity than that of ZO NPs and MZ nanocomposite against S. aureus. Reactive oxygen species (ROS) production and bacterial membrane disruption were confirmed as antibacterial mechanisms of MZ-LPEV. Finally, MZ-LPEV exhibited enhanced biocompatibility and selectivity for S. aureus. All our results showed that LPEV could be utilized for developing synergistic nanoantibiotics against S. aureus.

MoS2 nanosheet induced destructive alterations in the Escherichia coli bacterial membrane

Two dimensional molybdenum disulfide (MoS₂) nanosheets have recently gained wide recognition for their efficient broad-spectrum antibacterial activity complemented with great biocompatibility and minimal bacterial resistance inducing capabilities. However, despite the numerous investigations, the molecular level interactions at the nano-bio interface responsible for their bactericidal activity remain obscure. Herein, through an atomistic molecular dynamics study, we attempt to seek an in-depth understanding of the atomic level details of the underlying mechanism of their antibacterial action against the Escherichia coli (E. coli) bacterial membrane. Our study reveals a two-step MoS₂ nanosheet interaction pathway with the bacterial membrane. The nanosheets spontaneously adhere to the membrane surface and prompt vigorous phospholipid extraction majorly via strong van der Waals interactions with lipid hydrophobic tails. The lipid extraction process originates a significant water intrusion in the bilayer hydrophobic region, signifying the onset of cytoplasmic leakage under realistic conditions. Further, a synergistic effect of lipid-lipid self-interactions and lipid-MoS₂ dispersion interactions drags the nanosheet to completely immerse in the bilayer hydrophobic core. The embedded nanosheets induce a layerwise structural rearrangement of the membrane lipids in their vicinity, thus altering the structural and dynamic features of the membrane in a localized manner by (i) increasing the lipid fatty acyl tail ordering and (ii) alleviating the lipid lateral dynamics. The detrimental efficacy of the nanosheets can be magnified by enlarging the nanosheet size or by increasing the nanosheet concentration. Our study concludes that the MoS₂ nanosheets can exhibit their antibacterial action through destructive phospholipid extraction as well as by altering the morphology of the membrane by embedding in the membrane core.

An overview of nanomaterial-based novel disinfection technologies for harmful microorganisms: Mechanism, synthesis, devices and application

Harmful microorganism (e.g., new coronavirus) based infection is the most important security concern in life sciences and healthcare. This article aims to provide a state-of-the-art review on the development of advanced technology based on nanomaterial disinfection/sterilization techniques (NDST) for the first time including the nanomaterial types, disinfection techniques, bactericidal devices, sterilization products, and application scenarios (i.e., water, air, medical healthcare), with particular brief account of bactericidal behaviors referring to varied systems. In this emerging research area spanning the years from 1998 to 2021, total of ~200 publications selected for the type of review paper and research articles were reviewed. Four typical functional materials (namely type of metal/metal oxides, S-based, C-based, and N-based) with their development progresses in disinfection/sterilization are summarized with a list of synthesis and design. Among them, the widely used silver nanoparticles (AgNPs) are considered as the most effective bacterial agents in the type of nanomaterials at present and has been reported for inactivation of viruses, fungi, protozoa. Some methodologies against (1) disinfection by-products (DBPs) in traditional sterilization, (2) noble metal nanoparticles (NPs) agglomeration and release, (3) toxic metal leaching, (4) solar spectral response broadening, and (5) photogenerated e^-/h⁺ pairs recombination are reviewed and discussed in this field, namely (1) alternative techniques and nanomaterials, (2) supporter anchoring effect, (3) nonmetal functional nanomaterials, (4) element doping, and (5) heterojunction constructing. The feasible strategies in the perspective of NDST are proposed to involve (1) non-noble metal disinfectors, (2) multi-functional nanomaterials, (3) multi-component nanocomposite innovation, and (4) hybrid techniques for disinfection/sterilization system. It is promising to achieve 100% bactericidal efficiency for 10⁸ CFU/mL within a short time of less than 30 min.

Graphene-MoS2 polyfunctional hybrid hydrogels for the healing of transected Achilles tendon

Healing of injured tendon is a major clinical challenge in orthopaedic medicine, due to the poor regenerative potential of this tissue. Two-dimensional nanomaterials, as versatile scaffolds, have shown a great potential to support, trigger and accelerate the tendon regeneration. However, weak mechanical properties, poor functionality and low biocompatibility of these scaffolds as well as post-surgery infections are main drawbacks that limit their development in the higher clinical phases. In this work, a series of hydrogels consisting polyglycerol functionalized reduced graphene oxide (PG), polyglycerol-functionalized molybdenum disulfide (PMoS₂) and PG/PMoS₂ hybrid within the gelatin matrix are formulated in new scaffolds and their ability for the healing of injured Achilles tendon, due to their high mechanical properties, low toxicity, cell proliferation enhancement, and antibacterial activities is investigated. While scaffolds containing PG and PMoS₂ showed a moderate tendon regeneration and anti-inflammatory effect, respectively, their hybridization into PG/PMoS₂ demonstrated a synergistic healing efficiency. Along the same line, an accelerated return of tendon function with low peritendinous adhesion and low cross-sectional area in animal group treated with scaffold containing PG/PMoS₂ was observed. Taking advantage of the high biocompatibility, high strength, straightforward construction and fast tendon regeneration, PG/PMoS₂ can be used as a new scaffold for the future tissue engineering.

MoS2 based nanomaterials: Advanced antibacterial agents for future

Bacterial infections are yet another serious threat to human health. Misuse or overuse of conventional antibiotics has led to the arrival of various super resistant bacteria along with many serious side effects to human body. In this exigent circumstance, the use of nanomaterial based antibacterial agents is one of the most appropriate solutions to fight against bacteria thereby causing an inhibition to bacterial proliferation. Recent studies show that, due to the large surface area, high biocompatibility, strong near-infrared (NIR) absorption and low cytotoxicity, molybdenum disulphide (MoS₂), an extraordinary member in the transition metal dichalcogenides (TMDs) is extensively explored in the obliteration of many drug resistant bacteria, photothermal therapy and drug delivery. MoS₂ based nanomaterials can effectively prevent bacterial growth through many mechanisms. Through this review, we have tried to provide an inclusive knowledge on the recent progress of antibacterial studies in MoS₂ based nanomaterials including MoS₂ nanosheets, nanoflowers, quantum dot (QD), hybrid nanocomposites and polymer nanocomposites. Moreover, toxicity of MoS₂ based nanomaterials is described at the end of the review.

Inhibition effect of epigallocatechin gallate on the growth and biofilm formation of Vibrio parahaemolyticus

Vibrio parahaemolyticus (V. parahaemolyticus) is a common marine foodborne pathogen that causes gastroenteritis. With the long-term use of antibiotics, many bacteria become resistant strains, therefore, developing antibiotic-free antimicrobial strategies is urgent. Epigallocatechin gallate (EGCG) as the abundant constituent of polyphenols in tea extract has broad-spectrum antibacterial activity and non-toxicity. Here, we took advantage of EGCG to evaluate its inhibition effect on the growth of V. parahaemolyticus 17802 and the biofilm formation, and explore its antibacterial mechanism. It was found that EGCG showed antibacterial activity to V. parahaemolyticus 17802, and the minimum inhibitory concentration (MIC) is 128 μg mL^-1 , crystal violet staining and confocal laser scanning microscope (CLSM) evidenced EGCG hindered its biofilm formation. Moreover, the swimming motility and extracellular polysaccharides were also notably inhibited. The antibacterial mechanism was further confirmed by several assays, such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), live/dead staining assay, together with membrane permeability assay, which all suggested that EGCG caused damage to cell membrane and made it lose integrity, eventually resulting in the death of V. parahaemolyticus 17802. The bactericidal activity of EGCG verified its potential as a promising candidate to combat foodborne pathogen.

A MoS2 based silver-doped ZnO nanocomposite and its antibacterial activity against β-lactamase expressing Escherichia coli

Multidrug-resistant (MDR) Gram-negative bacteria including Escherichia coli are increasingly resistant to current antibiotics. Among the strategies implemented to eradicate such MDR pathogens, approaches based on two-dimensional (2D) nanomaterials have received considerable attention. In particular, the excellent physicochemical properties of 2D molybdenum disulfide (MoS₂) nanosheets, including a high surface area, good conductivity, and good surface retention, are advantageous for their use as bactericidal agents. Herein, we report the fabrication of a MoS₂-based nanocomposite conjugated with silver-doped zinc oxide (AZM) as an effective antibacterial agent against E. coli species. The properties of AZM were characterized, and its antibacterial activity against MDR E. coli strains with different resistance types was evaluated. MoS₂ was found to activate the antibacterial activity of AZM and provide enhanced selectivity against MDR E. coli strains expressing β-lactamases. We proposed that membrane disruption of bacterial cell walls was the major cell death mechanism for MDR E. coli. Furthermore, surface charge perturbation could explain the differences in AZM activity against MDR E. coli strains expressing a β-lactamase and a mobilized colistin resistance (mcr-1) gene product. Thus, a MoS₂-based nanocomposite with a functional conjugation strategy could be a selective nano-antibacterial platform against infections caused by MDR E. coli with resistance against β-lactam antibiotics.

In situ grown bacterial cellulose/MoS2 composites for multi-contaminant wastewater treatment and bacteria inactivation

For the purpose of developing multifunctional water purification materials capable of degrading organic pollutants while simultaneously inactivating microorganisms from contaminated wastewater streams, we report here a facile and eco-friendly method to immobilize molybdenum disulfide into bacterial cellulose via a one-step in-situ biosynthetic method. The resultant nanocomposite, termed BC/MoS₂, was shown to possess a photocatalytic activity capable of generating •OH from H₂O₂, while also exhibiting photodynamic/photothermal mechanisms, the combination of which exhibits synergistic activity for the degradation of pollutants as well as for bacterial inactivation. In the presence of H₂O₂, the BC/MoS₂ nanocomposite exhibited excellent antibacterial efficacy upwards of 99.9999% (6 log units) for the photoinactivation of both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus upon infrared (IR) lamp illumination (100 W, 760 nm ≤ λ ≤ 5000 nm, 15 cm vertical distance; 5 min). Mechanistic studies revealed synergistic pathogen inactivation resulting from the combination of photocatalytically generated •OH and hyperthermia induced by the photothermal conversion of the near-IR light. In addition, the BC/MoS₂ nanocomposite also showed excellent photodegradation activity for common aqueous contaminants in the presence of H₂O₂, including malachite green (a textile dye), catechol violet (a phenol) and formaldehyde. Taken together, our findings demonstrate that sustainable materials such as BC/MoS₂ have potential applications in wastewater treatment and microorganism disinfection.

Illuminating the biochemical interaction of antimicrobial few-layer black phosphorus with microbial cells using synchrotron macro-ATR-FTIR

In the fight against drug-resistant pathogenic bacterial and fungal cells, low-dimensional materials are emerging as a promising alternative treatment method. Specifically, few-layer black phosphorus (BP) has demonstrated its effectiveness against a wide range of pathogenic bacterial and fungal cells with studies suggesting low cytotoxicity towards healthy mammalian cells. However, the antimicrobial mechanism of action of BP is not well understood. Before new applications for this material can be realised, further in-depth investigations are required. In this work, the biochemical interaction between BP and a series of microbial cells is investigated using a variety of microscopy and spectroscopy techniques to provide a greater understanding of the antimicrobial mechanism. Synchrotron macro-attenuated total reflection-Fourier transform infrared (ATR-FTIR) micro-spectroscopy is used to elucidate the chemical changes occurring outside and within the cell of interest after exposure to BP nanoflakes. The ATR-FTIR data, coupled with high-resolution microscopy, reveals major physical and bio-chemical changes to the phospholipids and amide I and II proteins, as well as minor chemical changes to the structural polysaccharides and nucleic acids when compared to untreated cells. These changes can be attributed to the physical interaction of the BP nanoflakes with the cell membranes, combined with the oxidative stress induced by the degradation of the BP nanoflakes. This study provides insight into the biochemical interaction of BP nanoflakes with microbial cells, allowing for a better understanding of the antimicrobial mechanism of action that will be important for the next generation of applications such as implant coatings, wound dressings, or medical surfaces.

Multifunctional Photoactive Hydrogels for Wound Healing Acceleration

Light is an attractive tool that has a profound impact on modern medicine. Particularly, light-based photothermal therapy (PTT) and photodynamic therapy (PDT) show great application prospects in the prevention of wound infection and promoting wound healing. In addition, hydrogels have shown attractive advantages in the field of wound dressings due to their excellent biochemical effects. Therefore, multifunctional photoresponsive hydrogels (MPRHs) that integrate the advantages of light and hydrogels are increasingly used in biomedicine, especially in the field of wound repair. However, a comprehensive review of MPRHs for wound regeneration is still lacking. This review first focuses on various types of MPRHs prepared by diverse photosensitizers, photothermal agents (PHTAs) including transition metal sulfide/oxides nanomaterials, metal nanostructure-based PHTAs, carbon-based PHTAs, conjugated polymer or complex-based PHTAs, and/or photodynamic agents (PHDAs) such as ZnO-based, black-phosphorus-based, TiO₂-based, and small organic molecule-based PHDAs. We also then discuss how PTT, PDT, and photothermal/photodynamic synergistic therapy can modulate the microenvironments of bacteria to inhibit infection. Overall, multifunctional hydrogels with both therapeutic and tissue regeneration capabilities have been discussed and existing challenges, as well as future research directions in the field of MPRHs and their application in wound management are argued.

Controlled Release of Molecular Intercalants from Two-Dimensional Nanosheet Films

Solution co-deposition of two-dimensional (2D) nanosheets with chemical solutes yields nanosheet-molecular heterostructures. A feature of these macroscopic layered hybrids is their ability to release the intercalated molecular agent to express chemical functionality on their surfaces or in their near surroundings. Systematic design methods are needed to control this molecular release to match the demand for rate and lifetime in specific applications. We hypothesize that release kinetics are controlled by transport processes within the layered solids, which primarily involve confined molecular diffusion through nanochannels formed by intersheet van der Waals gaps. Here a variety of graphene oxide (GO)/molecular hybrids are fabricated and subject to transient experiments to characterize release kinetics, locations, and mechanisms. The measured release rate profiles can be successfully described by a numerical model of internal transport processes, and the results used to extract effective Z-directional diffusion coefficients for various film types. The diffusion coefficients are found to be 8 orders of magnitude lower than those in free solution due to nanochannel confinement and serpentine path effects, and this retardation underlies the ability of 2D materials to control and extend release over useful time scales. In-plane texturing of the heterostructured films by compressive wrinkling or crumpling is shown to be a useful design tool to control the release rate for a given film type and molecular intercalant. The potential of this approach is demonstrated through case studies on the controlled release of chemical virucidal agents.

Prominent antibacterial effect of sub 5 nm Cu nanoparticles/MoS2composite under visible light

Achieving an efficient and inexpensive bactericidal effect is a key point for the design of antibacterial agent. Recent advances have proved molybdenum disulfide (MoS₂) as a promising platform for antimicrobial applications, while the combination of metal nanoparticle would promote the antibacterial efficiency. Nevertheless, the dispersivity, cheapness and safety of metal nanoparticle loaded on MoS₂raised some concerns. In this paper, we successfully realized a uniform decoration of copper nanoparticles (CuNPs) on surface of MoS₂nanosheets, and the size of CuNPs could be controlled below 5 nm. Under 5 min irradiation of 660 nm visible light, the synthesized CuNPs/MoS₂composite demonstrated superior antibacterial performances (almost 100% bacterial killed) towards both Gram-negativeE. coliand Gram-positiveS. aureusover the single component (Cu or MoS₂), while the bactericidal effect could last for at least 6 h. The synergism of photodynamic generated hydroxyl radical (·OH), oxidative stress without reactive oxygen species production and the release of Cu ions was considered as the mechanism for the antibacterial properties of CuNPs/MoS₂. Our findings provided new insights into the development of two-dimensional antibacterial nanomaterials of high cost performance.

GO-based antibacterial composites: Application and design strategies

Graphene oxide (GO), for its unique structure with high biocompatibility and designability, is widely used in the antibacterial field. Various strategies have been designed to fabricate GO-based composites with antibacterial properties. This review summarized these strategies, divided them into three types and interpreted their antibacterial mechanisms: (i) "GO*/non-GO" type in which GO acts as the single antibacterial core, (ii) "GO*/non-GO*" type in which GO and non-GO components function synergistically as dual antibacterial cores, (iii) "GO/non-GO*" type in which non-GO acts as the single antibacterial core, while GO component plays a supportive, not a dominant role in antibiosis. Besides, the fields suiting their applications and factors influencing their antibacterial properties were analyzed. Finally, the limitations and prospects in the current researches were discussed. In summary, GO-based composites have revolutionized antibacterial strategies. This review may serve as a reference to inspire further research on GO-based antibacterial composites.

Growth Factor-Decorated Ti3 C2 MXene/MoS2 2D Bio-Heterojunctions with Quad-Channel Photonic Disinfection for Effective Regeneration of Bacteria-Invaded Cutaneous Tissue

Phototherapy has recently emerged as a competent alternative for combating bacterial infection without antibiotic-resistance risk. However, owing to the bacterial endogenous antioxidative glutathione (GSH), the exogenous reactive oxygen species (ROS) generated by phototherapy can hardly behave desired antibacterial effect. To address the daunting issue, a quad-channel synergistic antibacterial nano-platform of Ti₃ C₂ MXene/MoS₂ (MM) 2D bio-heterojunctions (2D bio-HJs) are devised and fabricated, which possess photothermal, photodynamic, peroxidase-like (POD-like), and glutathione oxidase-like properties. Under near-infrared (NIR) laser exposure, the 2D bio-HJs both yield localized heating and raise extracellular ROS level, leading to bacterial inactivation. Synchronously, Mo⁴⁺ ions can easily invade into ruptured bacterial membrane, arouse intracellular ROS, and deplete intracellular GSH. Squeezed between the "ROS hurricane" from both internal and external sides, the bacteria are hugely slaughtered. After being further loaded with fibroblast growth factor-21 (FGF21), the 2D bio-HJs exhibit benign cytocompatibility and boost cell migration in vitro. Notably, the in vivo evaluations employing a mouse-infected wound model demonstrate the excellent photonic disinfection towards bacterial infection and accelerated wound healing. Overall, this work provides a powerful nano-platform for the effective regeneration of bacteria-invaded cutaneous tissue using 2D bio-HJs.

Sustainable triazine-derived quaternary ammonium salts as antimicrobial agents

The first examples of highly efficient antimicrobial triazine-derived bis imidazolium quaternary ammonium salts (TQAS) are reported. TQAS have been prepared with an easy, atom efficient, economically sustainable strategy and tested as antimicrobial agents, reaching MIC values below 10 mg L^-1. Distinctively, TQAS have low MIC and low cytotoxicity.

Low-dimensional nanomaterials for antibacterial applications

The excessive use of antibiotics has led to a rise in drug-resistant bacteria. These "superbugs" are continuously emerging and becoming increasingly harder to treat. As a result, new and effective treatment protocols that have minimal risks of generating drug-resistant bacteria are urgently required. Advanced nanomaterials are particularly promising due to their drug loading/releasing capabilities combined with their potential photodynamic/photothermal therapeutic properties. In this review, 0-dimensional, 1-dimensional, 2-dimensional, and 3-dimensional nanomaterial-based systems are comprehensively discussed for bacterial-based diagnostic and treatment applications. Since the use of these platforms as antibacterials is relatively new, this review will provide appropriate insight into their construction and applications. As such, we hope this review will inspire researchers to explore antibacterial-based nanomaterials with the aim of developing systems for clinical applications.

Synergistic Photodynamic and Photothermal Antibacterial Activity of In Situ Grown Bacterial Cellulose/MoS2-Chitosan Nanocomposite Materials with Visible Light Illumination

Owing to the rise in prevalence of multidrug-resistant pathogens attributed to the overuse of antibiotics, infectious diseases caused by the transmission of microbes from contaminated surfaces to new hosts are an ever-increasing threat to public health. Thus, novel materials that can stem this crisis, while also functioning via multiple antimicrobial mechanisms so that pathogens are unable to develop resistance to them, are in urgent need. Toward this goal, in this work, we developed in situ grown bacterial cellulose/MoS₂-chitosan nanocomposite materials (termed BC/MoS₂-CS) that utilize synergistic membrane disruption and photodynamic and photothermal antibacterial activities to achieve more efficient bactericidal activity. The BC/MoS₂-CS nanocomposite exhibited excellent antibacterial efficacy, achieving 99.998% (4.7 log units) and 99.988% (3.9 log units) photoinactivation of Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, respectively, under visible-light illumination (xenon lamp, 500 W, λ ≥ 420 nm, and 30 min). Mechanistic studies revealed that the use of cationic chitosan likely facilitated bacterial membrane disruption and/or permeability, with hyperthermia (photothermal) and reactive oxygen species (photodynamic) leading to synergistic pathogen inactivation upon visible-light illumination. No mammalian cell cytotoxicity was observed for the BC/MoS₂-CS membrane, suggesting that such composite nanomaterials are attractive as functional materials for infection control applications.

Antipathogenic properties and applications of low-dimensional materials

A major health concern of the 21st century is the rise of multi-drug resistant pathogenic microbial species. Recent technological advancements have led to considerable opportunities for low-dimensional materials (LDMs) as potential next-generation antimicrobials. LDMs have demonstrated antimicrobial behaviour towards a variety of pathogenic bacterial and fungal cells, due to their unique physicochemical properties. This review provides a critical assessment of current LDMs that have exhibited antimicrobial behaviour and their mechanism of action. Future design considerations and constraints in deploying LDMs for antimicrobial applications are discussed. It is envisioned that this review will guide future design parameters for LDM-based antimicrobial applications.

Diatom-inspired 2D nitric oxide releasing anti-infective porous nanofrustules

Two-dimensional (2D) nanomaterials (NM) have emerged as promising platforms for antibacterial applications. However, the inherent "flatness" of 2D NM often limits the loading of antimicrobial components needed for synergistic bactericidal actions. Here, inspired by the highly ornamented siliceous frustules of diatoms, we prepared 2D ultrathin (<20 nm) and rigid "nanofrustule" plates via the out-of-plane growth of cetyltrimethylammonium bromide (CTAB) directed silica mesostructures on the surfaces of 2D graphene oxide nanosheets. The nanofrustules were characterized by the presence of mesoporous channels with a pore size of 3 nm and a high specific surface area of 674 m2 g-1. S-nitrosothiol-modification on the silica surfaces enables the development of a novel anti-infective nitric oxide (NO) releasing NO-nanofrustule system. The cage-like mesoporous silica architecture enabled a controlled and sustainable release of NO from the NO-nanofrustules under physiological conditions. The NO-nanofrustules displayed broad antibacterial effects against Staphylococcus aureus and Escherichia coli with a minimum inhibitory concentration of 250 μg ml-1. Mechanistic studies revealed that the antibacterial property of NO-nanofrustules was attained via a unique "capture-and-release" mode-of-action. The first step entailed the capture of the bacteria by the NO-nanofrustules to form micro-aggregates. This was followed by the release of high levels of NO to the captured bacteria to elicit a potent anti-infective effect. In combination with the lack of cytotoxicity in human dermal cells, the 2D hybrid NO-nanofrustules may be utilized to combat wound infections in clinical settings.

Enhanced Triboelectric Nanogenerator Based on Tungsten Disulfide via Thiolated Ligand Conjugation

Two-dimensional transition-metal dichalcogenides (TMDs) are of particular interest as a new active material for future triboelectric nanogenerators (TENGs) owing to their excellent electrical properties, optical transparency, flexibility, ultrathin thickness, and biocompatibility. Here, we propose a new approach to engineer the surface of TMDs via conjugation with thiolated ligands having different alkane chain lengths and to develop TMD-based TENG devices that exhibit enhanced output performance for the first time. The triboelectric charging behaviors of ligand-conjugated TMDs are successfully investigated, and the electrical output performance of TMD TENGs based on TMD-to-polymer device geometries with a vertical contact-separation mode is dramatically improved, exhibiting an output voltage of 12.2 V and a power density of 138 mW/m². Furthermore, the ligand-conjugated TMD TENG device exhibits a highly stable operation under repeated contact and separation over 10 000 cycles, as well as high chemical stability, as a result of novel defect engineering via thiolated ligand conjugation. Detailed investigation reveals that the improved performance of the ligand-conjugated TMD TENG device originates from the synergistic effect of defect engineering and the p-type doping effect of TMDs, correlated with the increased electric potential difference between triboelectric layers. These findings provide a new potential of TMDs as a promising building block for the next-generation energy harvesting system.

Broad-Spectrum Solvent-free Layered Black Phosphorus as a Rapid Action Antimicrobial

Antimicrobial resistance has rendered many conventional therapeutic measures, such as antibiotics, ineffective. This makes the treatment of infections from pathogenic micro-organisms a major growing health, social, and economic challenge. Recently, nanomaterials, including two-dimensional (2D) materials, have attracted scientific interest as potential antimicrobial agents. Many of these studies, however, rely on the input of activation energy and lack real-world utility. In this work, we present the broad-spectrum antimicrobial activity of few-layered black phosphorus (BP) at nanogram concentrations. This property arises from the unique ability of layered BP to produce reactive oxygen species, which we harness to create this unique functionality. BP is shown to be highly antimicrobial toward susceptible and resistant bacteria and fungal species. To establish cytotoxicity with mammalian cells, we showed that both L929 mouse and BJ-5TA human fibroblasts were metabolically unaffected by the presence of BP. Finally, we demonstrate the practical utility of this approach, whereby medically relevant surfaces are imparted with antimicrobial properties via functionalization with few-layer BP. Given the self-degrading properties of BP, this study demonstrates a viable and practical pathway for the deployment of novel low-dimensional materials as antimicrobial agents without compromising the composition or nature of the coated substrate.

Advances on Graphene-Based Nanomaterials and Mesenchymal Stem Cell-Derived Exosomes Applied in Cutaneous Wound Healing

Graphene is a new type of carbon nanomaterial discovered after fullerene and carbon nanotube. Due to the excellent biological properties such as biocompatibility, cell proliferation stimulating, and antibacterial properties, graphene and its derivatives have become emerging candidates for the development of novel cutaneous wound dressings and composite scaffolds. On the other hand, pre-clinical research on exosomes derived from mesenchymal stem cells (MSC-Exos) has been intensified for cell-free treatment in wound healing and cutaneous regeneration, via ameliorating the damaged microenvironment of the wound site. Here, we provide a comprehensive understanding of the latest studies and observations on the various effects of graphene-based nanomaterials (GBNs) and MSC-Exos during the cutaneous wound repair process, as well as the putative mechanisms thereof. In addition, we propose the possible forward directions of GBNs and MSC-Exos applications, expecting to promote the clinical transformation.

Antifouling and Antibacterial Polymer-Coated Surfaces Based on the Combined Effect of Zwitterions and the Natural Borneol

The development and application of natural antibacterial materials have always been the focus of biomedical research. Borneol as a natural antibacterial compound has received extensive attention. However, the hydrophobicity caused by its unique structure limits its application range to a certain extent. In this study, we combine zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) with a complex bicyclic monoterpene structure borneol compound and prepare an excellent antifouling and antibacterial surface via the Schiff-base bond. The prepared coating has excellent hydrophilicity verified by the contact angle (CA), and its polymer layer is confirmed by X-ray photoelectron spectroscopy (XPS). The zwitterion MPC and borneol moieties in the copolymer play a coordinating role, relying on super hydration and the special stereochemical structure to prevent protein adsorption and inhibit bacterial adhesion, respectively, which are demonstrated by bovine serum albumin (BSA) adsorption and antibacterial activity test. Moreover, the water-soluble borneol derivative as the antibacterial surfaces we designed here was biocompatible toward MRC-5 (lung fibroblasts), as showed by in vitro cytotoxicity assays. Such results indicate the potential application of the as-prepared hydrophilic surfaces in the biomedical materials.

Holotomography: Refractive Index as an Intrinsic Imaging Contrast for 3-D Label-Free Live Cell Imaging

Live cell imaging provides essential information in the investigation of cell biology and related pathophysiology. Refractive index (RI) can serve as intrinsic optical imaging contrast for 3-D label-free and quantitative live cell imaging, and provide invaluable information to understand various dynamics of cells and tissues for the study of numerous fields. Recently significant advances have been made in imaging methods and analysis approaches utilizing RI, which are now being transferred to biological and medical research fields, providing novel approaches to investigate the pathophysiology of cells. To provide insight into how RI can be used as an imaging contrast for imaging of biological specimens, here we provide the basic principle of RI-based imaging techniques and summarize recent progress on applications, ranging from microbiology, hematology, infectious diseases, hematology, and histopathology.

Graphene oxide as a pesticide carrier for enhancing fungicide activity against Magnaporthe oryzae

GO can cause the cell damage by cutting cell wall and oxidative stress, and the drug absorbed on the surface of GO were released precisely.

Shining light on transition metal sulfides: New choices as highly efficient antibacterial agents

Globally, millions of people die of microbial infection-related diseases every year. The more terrible situation is that due to the overuse of antibiotics, especially in developing countries, people are struggling to fight with the bacteria variation. The emergence of super-bacteria will be an intractable environmental and health hazard in the future unless novel bactericidal weapons are mounted. Consequently, it is critical to develop viable antibacterial approaches to sustain the prosperous development of human society. Recent researches indicate that transition metal sulfides (TMSs) represent prominent bactericidal application potential owing to the meritorious antibacterial performance, acceptable biocompatibility, high solar energy utilization efficiency, and excellent photo-to-thermal conversion characteristics, and thus, a comprehensive review on the recent advances in this area would be beneficial for the future development. In this review article, we start with the antibacterial mechanisms of TMSs to provide a preliminary understanding. Thereafter, the state-of-the-art research progresses on the strategies for TMSs materials engineering so as to promote their antibacterial properties are systematically surveyed and summarized, followed by a summary of the practical application scenarios of TMSs-based antibacterial platforms. Finally, based on the thorough survey and analysis, we emphasize the challenges and future development trends in this area.

A rose bengal/graphene oxide/PVA hybrid hydrogel with enhanced mechanical properties and light-triggered antibacterial activity for wound treatment

The numerous advantages of hydrogel make it possible to apply as dressing. However, it is challenging in designing hydrogels with desired antibacterial activity and enhanced mechanical properties at the same time. Herein, a graphene oxide/rose bengal/polyvinyl alcohol hybrid hydrogel (β-GO/RB/PVA HD) is prepared by freezing and thawing a mixed polyvinyl alcohol (PVA) solution of rose bengal (RB) immobilized with chitosan microspheres (CM) and a modified graphene oxide network (β-GO). The mechanical properties and light-triggered antibacterial activity of hydrogel are systematically evaluated. The β-GO inorganic network interpenetrate into the PVA porous structure, which significantly improves the mechanical properties of hydrogel. The hyperthermia generated by β-GO under 808 nm light irradiation combined with reactive oxygen species (ROS) produced by RB under 550 nm light irradiation give rise to excellent antibacterial activity requiring irradiation for only 10 min as demonstrated by our experiments conducted in vitro and in vivo. Meanwhile, β-GO/RB/PVA HD exhibits outstanding biocompatibility and water-absorbing capacity. More importantly, the hybrid hydrogel can significantly accelerate bacteria-accompanied wound healing. The results demonstrated that the hybrid hydrogel could be a promising wound dressing for preventing bacterial infection.