Polymer-Coated Ultrastable and Biofunctionalizable Lanthanide Nanoparticles

Optimizing optical thermometry with tri-doped Ba2GdV3O11 phosphors: Ratiometric and fluorescence lifetime analysis

Optical sensor technology has undergone a transformative evolution with the advent of fluorescence ratio techniques (FIR) and fluorescence lifetime (FL) strategies, revolutionizing precision, performance, and reliability. This study delves into the synthesis of Ba2GdV3O11 phosphors doped with Ho3+/Nd3+, Er3+, and Yb3+, employing the sol-gel method for upconverting material fabrication. A thorough investigation into the structural, morphological, and optical properties of the synthesized phosphors is conducted. Excitation at 980 nm unveils upconversion (UC) emissions across green and red spectra. The intensities of the observed emission bands for Ho3+, Nd3+, and Er3+ demonstrate significant sensitivity to fluctuations in temperature. Temperature sensing relies on the 4S3/2 and 2H11/2 upconversion emissions bands, in addition to the emission lifetimes at 4S3/2. Enhanced thermal sensitivity values are attained, reaching up to 1.03 % K-1 and 1.07 % K-1 using the FIR strategy, and up to 0.146 % K-1 and 0.47 % K-1 with the FL strategy for Ho3+/Er3+/Yb3+ and Nd3+/Er3+/Yb3+ tri-doped Ba2GdV3O11 phosphors, respectively. Furthermore, the studied phosphors exhibit remarkable precision in detecting minute temperature changes (0.3 K), positioning them as promising candidates for precise temperature sensing. This study pioneers innovative methodologies to advance optical thermometry techniques, offering promising prospects for scientific and industrial applications reliant on precise optical temperature sensing.

Advanced temperature sensing with Er3+/Yb3+ co-doped Ba2GdV3O11 phosphors through upconversion luminescence

Optical thermometry is a non-contact temperature sensing technique with widespread applications. It offers precise measurements without physical contact, making it ideal for situations where contact-based methods are impractical. However, improving the accuracy of optical thermometry remains an ongoing challenge. Herein, enhancing the thermometric properties of luminescent thermometers through novel materials or strategies is crucial for developing more precise sensors. Hence, the present study focuses on the application of four-mode luminescence thermometric techniques in sol-gel synthesized Er3+/Yb3+ co-doped Ba2GdV3O11 phosphors for optical temperature sensing in the temperature range of 298-573 K. The upconversion (UC) luminescence is achieved under excitations of 980 nm or 1550 nm, resulting in bright yellow-green emission in the visible spectral range. Temperature sensing is realized by exploiting the UC emissions of 4S3/2, 2H11/2 and 4F7/2 bands, which represent intensity ratios of thermally coupled levels (TCELs) and non-thermally coupled levels (NTCELs) of Er3+/Yb3+, along with the emission lifetimes at 4S3/2. The relative sensitivity (Sr) values for TCELs exhibit a gradual decrease with rising temperature, reaching a maximum of 1.1% K-1 for 980 nm excitation and 0.86% K-1 for 1550 nm excitation at 298 K. Conversely, for NTCELs, the highest Sr value observed is 0.9% K-1 at 298 K for 1550 nm excitation. Moreover, the emission lifetimes at 4S3/2 yield notably high Sr values of up to 5.0% μs K-1 (at 425 K). Furthermore, the studied phosphors have a sub-degree thermal resolution, making them excellent materials for accurate temperature sensing. Overall, this study provides a promising new direction for the development of more precise and reliable optical thermometry techniques, which could have important implications for a range of scientific and industrial optical temperature sensing applications.

Robust Strategy to Improve the Compatibility between Incorporated Upconversion Nanoparticles and the Bulk Transparent Polymer Matrix

Traditional transparent polymer nanocomposites combined with functional fluorescent inorganic nanofillers are promising for many advanced optical applications. However, the aggregation of the incorporated functional nanoparticles results in light scattering and will decrease the transparency of nanocomposites, which will restrain the application of the transparent nanocomposites. Herein, a robust synthesis strategy was proposed to modify upconversion nanoparticles (UCNPs) with polymethyl methacrylate (PMMA) to form UCNP@PMMA core@shell nanocomposites though metal-free photoinduced surface-initiated atom transfer radical polymerization (photo-SI-ATRP), and thus, the dispersity of UCNP@PMMA and the interface compatibility between the surface of UCNPs and the bulk PMMA matrix was greatly improved. The obtained PMMA nanocomposites possess high transparency and show strong upconversion photoluminescence properties, which promises great opportunities for application in 3D display and related optoelectronic fields. This strategy could also be applied to fabricate other kinds of functional transparent polymer nanocomposites with inorganic nanoparticles uniformly dispersed.

Two-Dimensional Polymer Networks Locking on Inorganic Nanoparticles

Two-dimensional polymers (2DPs), single-layer networks of covalently linked monomers, show perspectives as membranes and in electronics. However, 2D polymerization of monomers in orthogonal directions limited the formation of 2DPs on nanoparticles (NPs) with high surface curvatures. Here we propose a high-curvature 2D polymerization to form a single-layer 2DP network as a non-contacting ligand on the surface of NPs for their stabilization and functionalization. The high-curvature 2D polymerization of amphiphilic Gemini monomers was conducted in situ on surfaces of NPs with various sizes, shapes, and materials, forming highly cross-linked 2DPs. Selective etching of core-shell NPs led to 2DPs as a non-contact ligand of yolk-shell structures with excellent shape retention and high NP-surface accessibility. In addition, by copolymerization, the 2DP ligands can covalently link to other functional molecules. This work promotes the development of 2DPs on NPs for their functional modification.

Chemical and Colloidal Stability of Polymer-Coated NaYF4:Yb,Er Nanoparticles in Aqueous Media and Viability of Cells: The Effect of a Protective Coating

Upconverting nanoparticles (UCNPs) are of particular interest in nanomedicine for in vivo deep-tissue optical cancer bioimaging due to their efficient cellular uptake dependent on polymer coating. In this study, particles, ca. 25 nm in diameter, were prepared by a high-temperature coprecipitation of lanthanide chlorides. To ensure optimal dispersion of UCNPs in aqueous milieu, they were coated with three different polymers containing reactive groups, i.e., poly(ethylene glycol)-alendronate (PEG-Ale), poly(N,N-dimethylacrylamide-co-2-aminoethylacrylamide)-alendronate (PDMA-Ale), and poly(methyl vinyl ether-co-maleic acid) (PMVEMA). All the particles were characterized by TEM, DLS, FTIR, and spectrofluorometer to determine the morphology, hydrodynamic size and ξ-potential, composition, and upconversion luminescence. The degradability/dissolution of UCNPs in water, PBS, DMEM, or artificial lysosomal fluid (ALF) was evaluated using an ion-selective electrochemical method and UV-Vis spectroscopy. The dissolution that was more pronounced in PBS at elevated temperatures was decelerated by polymer coatings. The dissolution in DMEM was relatively small, but much more pronounced in ALF. PMVEMA with multiple anchoring groups provided better protection against particle dissolution in PBS than PEG-Ale and PDMA-Ale polymers containing only one reactive group. However, the cytotoxicity of the particles depended not only on their ability to rapidly degrade, but also on the type of coating. According to MTT, neat UCNPs and UCNP@PMVEMA were toxic for both rat cells (C6) and rat mesenchymal stem cells (rMSCs), which was in contrast to the UCNP@Ale-PDMA particles that were biocompatible. On the other hand, both the cytotoxicity and uptake of the UCNP@Ale-PEG particles by C6 and rMSCs were low, according to MTT assay and ICP-MS, respectively. This was confirmed by a confocal microscopy, where the neat UCNPs were preferentially internalized by both cell types, followed by the UCNP@PMVEMA, UCNP@Ale-PDMA, and UCNP@Ale-PEG particles. This study provides guidance for the selection of a suitable nanoparticle coating with respect to future biomedical applications where specific behaviors (extracellular deposition vs. cell internalization) are expected.

Preparation and cellular uptake behaviors of uniform fiber-like micelles with length controllability and high colloidal stability in aqueous media

Fragmentation/disassembly of fiber-like micelles generated by living crystalline-driven self-assembly (CDSA) is usually encountered in aqueous media, which hinders the applications of micelles. Herein, we report the generation of uniform fiber-like micelles consisting of a π-conjugated oligo(p-phenylenevinylene) core and a cross-linking silica shell with grafted poly(ethylene glycol) (PEG) chains by the combination of living CDSA, silica chemistry and surface grafting-onto strategy. Owing to the presence of crosslinking silica shell and the outmost PEG chains, the resulting micelles exhibit excellent dispersity and colloidal stability in PBS buffer, BSA aqueous solution and upon heating at 80 °C for 2 h without micellar fragmentation/disassembly. The micelles also show negligible cytotoxicity toward both HeLa cervical cancer and HEK239T human embryonic kidney cell lines. Interestingly, micelles with L n of 156 nm show the "stealth" property with no significant uptake by HeLa cells, whereas some certain amounts of micelles with L n of 535 nm can penetrate into HeLa cells, showing length-dependent cellular uptake behaviors. These results provide a route to prepare uniform, colloidally stable fiber-like nanostructures with tunable length and functions derived for biomedical applications.

Imparting Multifunctionality in Zr-MOFs Using the One-Pot Mixed-Linker Strategy: The Effect of Linker Environment and Enhanced Pollutant Removal

The development of mixed-linker metal-organic frameworks (MOFs) is an efficient strategy to improve the performance of MOFs. Herein, we successfully integrate tetrakis(4-carboxyphenyl)porphyrin (TCPP) into different Zr-MOFs via a facile one-pot solvothermal synthesis while preserving the integrity of their frameworks. The functional groups, length of primary linkers, and the inner pore structure significantly affected the properties of the synthesized TCPP@MOFs, such as surface area, average pore size, and ¹O₂ productivity. Among them, TCPP@PCN-777 demonstrated the largest surface area (2386 cm²/g, as measured by N₂ uptake) and the highest ¹O₂ generation rate (1.15 h^-1, [¹O₂]_ss = 2.66 × 10^-12 M) under irradiation. The TCPP loading was also shown to affect the crystal phase, morphology, surface area, and photochemical properties of the synthesized MOFs. Therefore, TCPP@PCN-777s with various TCPP loadings were synthesized to investigate the optimum loading. The optimized TCPP@MOF, TCPP@PCN-777-30, was evaluated for its removal of model contaminant ranitidine (RND) through both adsorption and photodegradation. TCPP@PCN-777-30 showed a higher adsorption capacity toward RND than both the parent MOF (PCN-777) and commercially available activated carbon, and effectively degraded RND in aqueous solution (>99% photodegradation in 1 h). With irradiation, TCPP@PCN-777-30 showed a minimal loss in adsorption efficiency over four consecutive treatment cycles, confirming the reusability of the material enabled through the incorporation of TCPP into the MOF structure. This work not only developed an efficient multifunctional material for environmental remediation but also forwarded knowledge on the effect of linker environment (i.e., functional groups, framework structure, and linker ratio) on the properties of TCPP@MOFs to guide future research on mixed-linker MOFs.

Poly(4-Styrenesulfonic Acid-co-maleic Anhydride)-Coated NaGdF4:Yb,Tb,Nd Nanoparticles with Luminescence and Magnetic Properties for Imaging of Pancreatic Islets and β-Cells

Novel Yb,Tb,Nd-doped GdF₃ and NaGdF₄ nanoparticles were synthesized by a coprecipitation method in ethylene glycol (EG) in the presence of the poly(4-styrenesulfonic acid-co-maleic anhydride) stabilizer. The particle size and morphology, crystal structure, and phase change were controlled by adjusting the PSSMA concentration and source of fluoride anions in the reaction. Doping of Yb³⁺, Tb³⁺, and Nd³⁺ ions in the NaGdF₄ host nanoparticles induced luminescence under ultraviolet and near-infrared excitation and high relaxivity in magnetic resonance (MR) imaging (MRI). In vitro toxicity of the nanoparticles and their cellular uptake efficiency were determined in model rat pancreatic β-cells (INS-1E). As the NaGdF₄:Yb,Tb,Nd@PSSMA-EG nanoparticles were non-toxic and possessed good luminescence and magnetic properties, they were applicable for in vitro optical and MRI of isolated pancreatic islets in phantoms. The superior contrast was achieved for in vivo T₂*-weighted MR images of the islets transplanted under the kidney capsule to mice in preclinical trials.

Molecular Descriptors as a Facile Tool toward Designing Surface-Functionalized Nanoparticles for Drug Delivery

Modulating the surface chemistry of nanoparticles, often by grafting hydrophilic polymer brushes (e.g., polyethylene glycol) to prepare nanoformulations that can resist opsonization in a hematic environment and negotiate with the mucus barrier, is a popular strategy toward developing biocompatible and effective nano-drug delivery systems. However, there is a need for tools that can screen multiple surface ligands and cluster them based on both structural similarity and physicochemical attributes. Molecular descriptors offer numerical readouts based on molecular properties and provide a fertile ground for developing quick screening platforms. Thus, a study was conducted with 14 monomers/repeating blocks of polymeric chains, namely, oxazoline, acrylamide, vinylpyrrolidone, glycerol, acryloyl morpholine, dimethyl acrylamide, hydroxypropyl methacrylamide, hydroxyethyl methacrylamide, sialic acid, carboxybetaine acrylamide, carboxybetaine methacrylate, sulfobetaine methacrylate, methacryloyloxyethyl phosphorylcholine, and vinyl-pyridinio propanesulfonate, capable of imparting hydrophilicity to a surface when assembled as polymeric brushes. Employing free, Web-based, and user-friendly platforms, such as SwissADME and ChemMine tools, a series of molecular descriptors and Tanimoto coefficient of molecular pairs were determined, followed by hierarchical clustering analyses. Molecular pairs of oxazoline/dimethyl acrylamide, hydroxypropyl methacrylamide/hydroxyethyl methacrylamide, acrylamide/glycerol, carboxybetaine acrylamide/vinyl-pyridinio propanesulfonate, and sulfobetaine methacrylate/methacryloyloxyethyl phosphorylcholine were clustered together. Similarly, the molecular pair of hydroxypropyl methacrylamide/hydroxyethyl methacrylamide demonstrated a high Tanimoto coefficient of >0.9, whereas the pairs oxazoline/vinylpyrrolidone, acrylamide/dimethyl acrylamide, acryloyl morpholine/dimethyl acrylamide, acryloyl morpholine/hydroxypropyl methacrylamide, acryloyl morpholine/hydroxyethyl methacrylamide, carboxybetaine methacrylate/sulfobetaine methacrylate, and glycerol/hydroxypropyl methacrylamide had a Tanimoto coefficient of >0.8. The analyzed data not only demonstrated the ability of such in silico tools as a facile technique in clustering molecules of interest based on their structure and physicochemical characteristics but also provided vital information on their behavior within biological systems, including the ability to engage an array of possible molecular targets when the monomers are self-assembled on nanoparticulate surfaces.

Effect of Excess Ligand on the Reverse Microemulsion Silica Coating of NaLnF4 Nanoparticles

Silica coating of inorganic nanoparticles (NPs) is widely employed as a means of providing colloidal stability in aqueous media and surface functionality for a variety of applications, particularly in biology. When the NPs are synthesized with a surface coating of an organic surfactant like oleic acid, silica coating is performed by using the reverse microemulsion method. There are many reports in the literature of the successful application of this method to NaYF₄ upconversion NPs (doped with Yb and Er), and we have used this method to coat NaHoF₄ NPs designed as a mass cytometry reagent. This method failed when we attempted to apply it to other NaLnF₄ NPs (Ln = Sm, Eu, Tb). In this report we describe an investigation of the problem and show how it can be overcome. To control size in the synthesis of NaLnF₄ NPs and at the same time maintain size uniformity, it is necessary to adjust the Na/F and F/Ln ratios. Problems with silica coating are associated with substoichiometric F/Ln ratios (F/Ln < 4) that leave Ln oleate salts as a byproduct, often as a phase-separated oily layer that could not be purified from the NPs by precipitation with ethanol and redispersion in hexanes. The nature of the oily byproduct was inferred from a combination of TGA, NMR, and FTIR measurements. We explored five different additional purification procedures, and by adopting the appropriate purification method, NaLnF₄ NPs with a variety of compositions and synthesized using different reaction conditions could be coated with a thin shell of silica.

Versatile thiolactone-based conjugation strategies to polymer stabilizers for multifunctional upconverting nanoparticles aqueous dispersions

We describe here a new methodology for the synthesis of well-defined phosphonic acid-terminated poly(ethylene glycol) (PEG) and RAFT-derived poly(N-vinylpyrrolidone) (PVP) and poly(N-vinylcaprolactam) (PVCL) by amine-thiol-ene and amine-thiol-thiosulfonate conjugation strategies using a phosphonated thiolactone and their use to prepare stable, water-dispersible multifunctional upconverting luminescent nanohybrids.

Intra-articular Injection of Kartogenin-Enhanced Bone Marrow-Derived Mesenchymal Stem Cells in the Treatment of Knee Osteoarthritis in a Rat Model

BACKGROUND

In this study, we investigated the in vitro and in vivo chondrogenic capacity of kartogenin (KGN)-enhanced bone marrow-derived mesenchymal stem cells (BMSCs) for cartilage regeneration.

PURPOSE

To determine (1) whether functionalized nanographene oxide (NGO) can effectively deliver KGN into BMSCs and (2) whether KGN would enhance BMSCs during chondrogenesis in vitro and in vivo in an animal model.

STUDY DESIGN

Controlled laboratory study.

METHODS

Functionalized NGO with line chain amine-terminated polyethylene glycol (PEG) and branched polyethylenimine (BPEI) were used to synthesize biocompatible NGO-PEG-BPEI (PPG) and for loading hydrophobic KGN molecules noncovalently via π-π stacking and hydrophobic interactions (PPG-KGN). Then, PPG-KGN was used for the intracellular delivery of hydrophobic KGN by simple mixing and co-incubation with BMSCs to acquire KGN-enhanced BMSCs. The chondrogenic efficacy of KGN-enhanced BMSCs was evaluated in vitro. In vivo, osteoarthritis (OA) was induced by anterior cruciate ligament transection in rats. A total of 5 groups were established: normal (OA treated with nothing), phosphate-buffered saline (PBS; intra-articular injection of PBS), PPG-KGN (intra-articular injection of PPG-KGN), BMSCs (intra-articular injection of BMSCs), and BMSCs + PPG-KGN (intra-articular injection of PPG-KGN-preconditioned BMSCs). At 6 and 9 weeks after the surgical induction of OA, the rats received intra-articular injections of PPG-KGN, BMSCs, or KGN-enhanced BMSCs. At 14 weeks after the surgical induction of OA, radiographic and behavioral evaluations as well as histological analysis of the knee joints were performed.

RESULTS

The in vitro study showed that PPG could be rapidly uptaken in the first 4 hours after incubation, reaching saturation at 12 hours and accumulating in the lysosome and cytoplasm of BMSCs. Thus, PPG-KGN could enhance the efficiency of the intracellular delivery of KGN, which showed a remarkably high chondrogenic differentiation capacity of BMSCs. When applied to an OA model of cartilage injuries in rats, PPG-KGN-preconditioned BMSCs contributed to protection from joint space narrowing, pathological mineralization, OA development, and OA-induced pain, as well as improved tissue regeneration, as evidenced by radiographic, weightbearing, and histological findings.

CONCLUSION

Our results demonstrate that KGN-enhanced BMSCs showed markedly improved capacities for chondrogenesis and articular cartilage repair. We believe that this work demonstrates that a multifunctional nanoparticle-based drug delivery system could be beneficial for stem cell therapy. Our results present an opportunity to reverse the symptoms and pathophysiology of OA.

CLINICAL RELEVANCE

The intracellular delivery of KGN to produce BMSCs with enhanced chondrogenic potential may offer a new approach for the treatment of OA.

Mitochondria-targeting graphene oxide nanocomposites for fluorescence imaging-guided synergistic phototherapy of drug-resistant osteosarcoma

BACKGROUND

Osteosarcoma (OS) is the most common primary malignant bone tumor occurring in children and young adults. Drug-resistant osteosarcoma often results in chemotherapy failure. Therefore, new treatments aimed at novel therapeutic targets are urgently needed for the treatment of drug-resistant osteosarcoma. Mitochondria-targeted phototherapy, i.e., synergistic photodynamic/photothermal therapy, has emerged as a highly promising strategy for treating drug-resistant tumors. This study proposed a new nano-drug delivery system based on near-infrared imaging and multifunctional graphene, which can target mitochondria and show synergistic phototherapy, with preferential accumulation in tumors.

METHODS AND RESULTS

Based on our previous study, (4-carboxybutyl) triphenyl phosphonium bromide (TPP), a mitochondria-targeting ligand, was conjugated to indocyanine green (ICG)-loaded, polyethylenimine-modified PEGylated nanographene oxide sheets (TPP-PPG@ICG) to promote mitochondrial accumulation after cellular internalization. Thereafter, exposure to a single dose of near-infrared irradiation enabled synergistic photodynamic and photothermal therapy, which simultaneously inhibited adenosine triphosphate synthesis and mitochondrial function. Induction of intrinsic apoptosis assisted in surmounting drug resistance and caused tumor cell death. After fluorescence imaging-guided synergistic phototherapy, the mitochondria-targeting, multifunctional graphene-based, drug-delivery system showed highly selective anticancer efficiency in vitro and in vivo, resulting in marked inhibition of tumor progression without noticeable toxicity in mice bearing doxorubicin-resistant MG63 tumor cells.

CONCLUSION

The mitochondria-targeting TPP-PPG@ICG nanocomposite constitutes a new class of nanomedicine for fluorescence imaging-guided synergistic phototherapy and shows promise for treating drug-resistant osteosarcoma.

Red blood cell membrane-coated upconversion nanoparticles for pretargeted multimodality imaging of triple-negative breast cancer

Upconversion nanoparticles (UCNPs) have been widely employed for tumor imaging using magnetic resonance imaging (MRI) and upconversion luminescence (UCL) imaging. The short blood clearance time and immunogenicity of UCNPs have limited their further application in vivo. We have designed UCNPs camouflaged with an exterior red blood cell (RBC) membrane coating (RBC-UCNPs) to solve these problems. Moreover, because of some intrinsic disadvantages of MRI and UCL imaging, we investigated the use of pretargeted RBC-UCNPs for positron-emission tomography (PET) imaging to obtain more comprehensive information. Our data showed that RBC-UCNPs retained the immunity feature from the source cells and the superior optical and chemical features from the pristine UCNP cores. The tumor-targeting ability of RBC-UCNPs was enhanced by binding 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[folate(polyethylene glycol)-2000] (DSPE-PEG-FA) molecules onto the cell membranes. PET imaging with short half-life radionuclides to visualize the RBC-UCNPs was successfully realized by a combination of pre-targeting and in vivo click chemistry. Blood chemistry, hematology, and histologic analysis suggested good in vivo biocompatibility of the RBC-UCNPs. Our method provides a new potential biomedical application of biomimetic nanoparticles.

In vivo deep-tissue microscopy with UCNP/Janus-dendrimers as imaging probes: resolution at depth and feasibility of ratiometric sensing

Lanthanide-based upconverting nanoparticles (UCNPs) are known for their remarkable ability to convert near-infrared energy into higher energy light, offering an attractive platform for construction of biological imaging probes. Here we focus on in vivo high-resolution microscopy - an application for which the opportunity to carry out excitation at low photon fluxes in non-linear regime makes UCNPs stand out among all multiphoton probes. To create biocompatible nanoparticles we employed Janus-type dendrimers as surface ligands, featuring multiple carboxylates on one 'face' of the molecule, polyethylene glycol (PEG) residues on another and Eriochrome Cyanine R dye as the core. The UCNP/Janus-dendrimers showed outstanding performance as vascular markers, allowing for depth-resolved mapping of individual capillaries in the mouse brain down to a remarkable depth of ∼1000 μm under continuous wave (CW) excitation with powers not exceeding 20 mW. Using a posteriori deconvolution, high-resolution images could be obtained even at high scanning speeds in spite of the blurring caused by the long luminescence lifetimes of the lanthanide ions. Secondly, the new UCNP/dendrimers allowed us to evaluate the feasibility of quantitative analyte imaging in vivo using a popular ratiometric UCNP-to-ligand excitation energy transfer (EET) scheme. Our results show that the ratio of UCNP emission bands, which for quantitative sensing should respond selectively to the analyte of interest, is also strongly affected by optical heterogeneities of the medium. On the other hand, the luminescence decay times of UCNPs, which are independent of the medium properties, are modulated via EET only insignificantly. As such, quantitative analyte sensing in biological tissues with UCNP-based probes still remains a challenge.

Photo-induced copper mediated copolymerization of activated-ester methacrylate polymers and their use as reactive precursors to prepare multi-dentate ligands for the water transfer of inorganic nanoparticles

Polymers bearing activated ester groups are synthesized using photo-ATRP and used as precursors for direct synthesis of multi-phosphonic acid functionalized ligands which are able to transfer different nanoparticles with distinct cores into water.

Surface Activity of Smart Hybrid Polysiloxane-co-N-isopropylacrylamide Microgels

Amphiphilic smart gels of different sizes (macro, micro, and nano) are widely used in advanced medical, industrial, and environmental applications. They are sensitive, responsive to different environments, and possess a high surface activity to adsorb onto different interfaces. In this study, new amphiphilic alkoxysilane-containing microgels, hybrid polysiloxane microgel, and silica nanoparticles were prepared using a cross-linking surfactant-free cross-linking polymerization technique for N-isopropylacrylamide (NIPAm) and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) monomers. Vinyltrimethoxysilane (VTS) was used as a silane precursor in the cross-linking polymerization to hydrolyze with tetraethoxysilane (TEOS) in ammonia using an emulsion technique, to create polysiloxane microgel and silica nanoparticles. The surface activity measurements confirmed that NIPAm/VTS had a higher surface activity than NIPAm/AMPS-VTS microgels and their hybrid polysiloxane microgel owing to the differences of the cross-linking of microgels from the center to the microgel periphery, which alter their morphologies.

Synthetic Semiflexible and Bioactive Brushes

Polymer brushes are extensively used for the preparation of bioactive surfaces. They form a platform to attach functional (bio)molecules and control the physicochemical properties of the surface. These brushes are nearly exclusively prepared from flexible polymers, even though much stiffer brushes from semiflexible polymers are frequently found in nature, which exert bioactive functions that are out of reach for flexible brushes. Synthetic semiflexible polymers, however, are very rare. Here, we use polyisocyanopeptides (PICs) to prepare high-density semiflexible brushes on different substrate geometries. For bioconjugation, we developed routes with two orthogonal click reactions, based on the strain-promoted azide-alkyne cycloaddition reaction and the (photoactivated) tetrazole-ene cycloaddition reaction. We found that for high brush densities, multiple bonds between the polymer and the substrate are necessary, which was achieved in a block copolymer strategy. Whether the desired biomolecules are conjugated to the PIC polymer before or after brush formation depends on the dimensions and required densities of the biomolecules and the curvature of the substrate. In either case, we provide mild, aqueous, and highly modular reaction strategies, which make PICs a versatile addition to the toolbox for generating semiflexible bioactive polymer brush surfaces.

Upconverting Lanthanide Fluoride Core@Shell Nanorods for Luminescent Thermometry in the First and Second Biological Windows: β-NaYF4:Yb3+- Er3+@SiO2 Temperature Sensor

Upconverting core@shell type β-NaYF₄:Yb³⁺-Er³⁺@SiO₂ nanorods have been obtained by a two-step synthesis process, which encompasses hydrothermal and microemulsion routes. The synthesized nanomaterial forms stable aqueous colloids and exhibits a bright dual-center emission (λ_ex = 975 nm), i.e., upconversion luminescence of Er³⁺ and down-shifting emission of Yb³⁺, located in the first (I-BW) and the second (II-BW) biological windows of the spectral range, respectively. The intensity ratios of the emission bands of Er³⁺ and Yb³⁺ observed in the vis-near-infrared (NIR) range monotonously change with temperature, i.e., the thermalized Er³⁺ levels (²H_11/2 → ⁴I_15/2/⁴S_3/2 → ⁴I_15/2) and the nonthermally coupled Yb³⁺/Er³⁺ levels (²F_5/2 → ²F_7/2/⁴I_9/2 → ⁴I_15/2 or ⁴F_9/2 → ⁴I_15/2). Hence, their thermal evolutions have been correlated with temperature using the Boltzmann type distribution and second-order polynomial fits for temperature-sensing purposes, i.e., Er³⁺ 525/545 nm (max S_r = 1.31% K^-1) and Yb³⁺/Er³⁺ 1010/810 nm (1.64% K^-1) or 1010/660 nm (0.96% K^-1). Additionally, a fresh chicken breast was used as a tissue imitation in the performed ex vivo experiment, showing the advantage of the use of NIR Yb³⁺/Er³⁺ bands, vs. the typically used Er³⁺ 525/545 nm band ratio, i.e., better penetration of the luminescence signal through the tissue in the I-BW and II-BW. Such nanomaterials can be utilized as accurate and effective, broad-range vis-NIR optical, contactless sensors of temperature.

The synthesis, self-assembly and pH-responsive fluorescence enhancement of an alternating amphiphilic copolymer with azobenzene pendants

In this work, a novel alternating amphiphilic copolymer (AAC) P(EG₄-a-NAzoOMe) with azobenzene pendants can selfassemble into large compound micelles, and it features fantastic pH-enhanced aggregate induced emission property.

Paper-based lateral flow strip assay for the detection of foodborne pathogens: principles, applications, technological challenges and opportunities

As a representative colorimetic biosnesor, paper-based LFSA have emerged as a promising and robust tool that can easily and instansly detect the presence of target biological components in food sample. Recently, LFSAs have gained a considerable attention as an alternative method for rapid diagnosis of foodborne pathogens to the conventional culture-based assays such as plate counting and PCR. One major drawback of the current LFSAs for the detection of pathogenic bacteria is the low sensitivity, limiting its practical applications in POCT. Not like many other protein-based biomarkers that are present in nM or pM range, the number of pathogenic bacteria that cause disease can be as low as few CFU/ml. Here, we review current advances in LFSAs for the detection of pathogenic bacteria in terms of chromatic agents and analyte types. Furthermore, recent approaches for signal enhancement and modifications of the LFSA architecture for multiplex detection of pathogenic bacteria are included in this review, together with the advantages and limitations of each techniques. Finally, the technological challenges and future prospect of LFSA-based POCT for the detection of pathogenic bacteria are discussed.

Polymer Brushes: Efficient Synthesis and Applications

Polymer brushes are special macromolecular structures with polymer chains densely tethered to another polymer chain (one-dimensional, 1D) or the surface of a planar (two-dimensional, 2D), spherical or cylindrical (three-dimensional, 3D) solid via a stable covalent or noncovalent bond linkage. In comparison with the corresponding linear counterpart with similar molecular composition, one-dimension polymer brushes have some fascinating properties including wormlike conformation, compact molecular dimension, and notable chain end effects due to their compact and confined densely grafted structure. The introduction of polymer chains onto the surface of planar and spherical or cylindrical matrix will not only significantly change the surface-related properties of the matrix but also endows the obtained hybrid polymer brushes with new functionalities. Thus, polymer brushes are of great interest in the fields of polymer and material science due to their broad applications, such as catalysis, nanolithography, biomineralization, drug delivery, medical diagnosis, optoelectronics, and so on. Although a variety of 1D, 2D, and 3D polymer brushes have been prepared with the advent of living/controlled polymerization, the development of more efficient and facile synthetic protocols that permit access to polymer brushes with precisely controlled composition, structure, and functionality still represents a key contemporary challenge. In this Account, we summarize our recent efforts on the development of efficient methods to prepare 1D, 2D, and 3D polymer brushes and exploration of their potential applications in drug delivery, antifouling coating, catalysis, and lithium-ion batteries and also highlight related achievements by other groups. First, we briefly introduce the precedent examples of efficient synthesis of polymer brushes with different structures and functionalities by the combination of monomer design with living/controlled polymerization. Given the excellent tolerance and use of the same catalytic system without any mutual interference of ATRP and Cu-catalyzed alkyne-azide cyclization (CuAAC) click reaction, a versatile and efficient platform for precise synthesis of complex asymmetric (Janus-type) 1D polymer brushes was developed on the basis of the "trifunctional monomer" strategy without polymeric functionality transformation. Subsequently, a noncovalent strategy based on crystallization-driven self assembly to prepare well-defined polymer brushes with precise control over their composition and dimensions is described. Notably, the crystallization-driven self assembly can be treated as a living/controlled polymerization of "polymeric monomer" with a special building segment for crystallization, which allows for preparing linear polymer brushes with length as high as tens of micrometers. Moreover, the properties and related applications of polymer brushes as interesting building blocks for constructing hierarchical nanostructures, efficient drug deliver carriers, antifouling films, and lithium-ion batteries are addressed by some typical examples. These advancements in this field will provide a new avenue for obtaining fascinating polymer-brush-based functional materials.

Multifunctional Optical Sensors for Nanomanometry and Nanothermometry: High-Pressure and High-Temperature Upconversion Luminescence of Lanthanide-Doped Phosphates-LaPO4/YPO4:Yb3+-Tm3

Upconversion luminescence of nano-sized Yb³⁺ and Tm³⁺ codoped rare earth phosphates, that is, LaPO₄ and YPO₄, has been investigated under high-pressure (HP, up to ∼25 GPa) and high-temperature (293-773 K) conditions. The pressure-dependent luminescence properties of the nanocrystals, that is, energy red shift of the band centroids, changes of the band ratios, shortening of upconversion lifetimes, and so forth, make the studied nanomaterials suitable for optical pressure sensing in nanomanometry. Furthermore, thanks to the large energy difference (∼1800 cm^-1), the thermalized states of Tm³⁺ ions are spectrally well-separated, providing high-temperature resolution, required in optical nanothermometry. The temperature of the system containing such active nanomaterials can be determined on the basis of the thermally induced changes of the Tm³⁺ band ratio (³F_2,3 → ³H₆/³H₄ → ³H₆), observed in the emission spectra. The advantage of such upconverting optical sensors is the use of near-infrared light, which is highly penetrable for many materials. The investigated nanomanometers/nanothermometers have been successfully applied, as a proof-of-concept of a novel bimodal optical gauge, for the determination of the temperature of the heated system (473 K), which was simultaneously compressed under HP (1.5 and 5 GPa).

Systematic investigation of functional ligands for colloidal stable upconversion nanoparticles

Despite intense efforts on surface functionalization to generate hydrophilic upconversion nanoparticles (UCNPs), long-term colloidal stability in physiological buffers remains a major concern. Here we quantitatively investigate the competitive adsorption of phosphate, carboxylic acid and sulphonic acid onto the surface of UCNPs and study their binding strength to identify the best conjugation strategy. To achieve this, we designed and synthesized three di-block copolymers composed of poly(ethylene glycol) methyl ether acrylate and a polymer block bearing phosphate, carboxylic or sulphonic acid anchoring groups prepared by an advanced polymerization technique, Reversible Addition Fragmentation Chain Transfer (RAFT). Analytical tools provide the evidence that phosphate ligands completely replaced all the oleic acid capping molecules on the surface of the UCNPs compared with incomplete ligand exchange by carboxylic and sulphonic acid groups. Meanwhile, simulated quantitative adsorption energy measurements confirmed that among the three functional groups, the calculated adsorption strength for phosphate anchoring ligands is higher which is in good agreement with experimental results regarding the best colloidal stability, especially in phosphate buffer solution. This finding suggests that polymers with multiple anchoring negatively charged phosphate moieties provide excellent colloidal stability for lanthanide ion-doped luminescent nanoparticles for various potential applications.

Here we quantitatively investigate the competitive adsorption of polymers bearing phosphate, carboxylic acid and sulphonic acid anchoring groups onto the surface of UCNPs and study their binding strength to identify the best conjugation strategy.

A simple neridronate-based surface coating strategy for upconversion nanoparticles: highly colloidally stable 125I-radiolabeled NaYF4:Yb3+/Er3+@PEG nanoparticles for multimodal in vivo tissue imaging

In this report, monodisperse upconversion NaYF₄:Yb³⁺/Er³⁺ nanoparticles with superior optical properties were synthesized by the oleic acid-stabilized high-temperature co-precipitation of lanthanide chlorides in octadec-1-ene as a high-boiling organic solvent. To render the particles with biocompatibility and colloidal stability in bioanalytically relevant phosphate buffered saline (PBS), they were modified by using in-house synthesized poly(ethylene glycol)-neridronate (PEG-Ner), a bisphosponate. The NaYF₄:Yb³⁺/Er³⁺@PEG nanoparticles showed excellent long-term stability in PBS and/or albumin without any aggregation or morphology transformation. The in vitro cytotoxicity of the nanoparticles was evaluated using primary fibroblasts (HF) and a cell line derived from human cervical carcinoma (HeLa). The particles were subsequently modified by using Bolton-Hunter-hydroxybisphosphonate to enable radiolabeling with ¹²⁵I for single-photon emission computed tomography/computed tomography (SPECT/CT) bimodal imaging to monitor the biodistribution of the nanoparticles in non-tumor mice. The bimodal upconversion ¹²⁵I-radiolabeled NaYF₄:Yb³⁺/Er³⁺@PEG nanoparticles are prospective for near-infrared (NIR) photothermal/photodynamic and SPECT/CT cancer theranostics.