Oxygen Vacancies in Shape Controlled Cu2O/Reduced Graphene Oxide/In2O3 Hybrid for Promoted Photocatalytic Water Oxidation and Degradation of Environmental Pollutants

Mapping Photogenerated Electron-Hole Behavior of Graphene Oxide: Insight into a New Mechanism of Photosensitive Pollutant Degradation

The use of graphene oxide (GO) photogenerated electron-hole (e-h+) pairs to degrade pollutants is a novel green method for wastewater treatment. However, the interaction between photosensitive pollutants and a GO-light system remains unclear. In this work, the mechanism of degradation of photosensitive pollutant tetracycline (TC) promoted by GO photogenerated e-h+ pairs was studied. Our studies encompassed the determination of TC removal kinetics, analysis of active substances for TC degradation, identification of degradation products, and computational modeling. Clear evidence shows that a new reaction mechanism of enhanced adsorption and induced generation of reactive oxygen species (ROS) was involved. This mechanism was conducive to significantly enhanced TC removal. Kinetic studies showed a first-order behavior that can be well described by the Langmuir-Hinshelwood model. Radical scavenging experiments confirmed that 1O2, •O2-, and holes (h+) were the main active substances for TC degradation. Electron spin resonance analysis indicated that photoexcited TC molecules may transfer electrons to the conduction band of GO to induce the generation of additional ROS. A major transformation product (m/z 459) during TC degradation was identified with liquid chromatography-mass spectrometry. Density functional theory calculation indicated a stronger adsorption between TC and GO under photoirradiation. This mechanism of photo-enhanced adsorption and synergistic induced generation of ROS provides a new strategy for the removal of emerging pollutants in water. Overall, the new mechanism revealed in this work expands the knowledge of applying GO to wastewater treatment and is of great reference value for research in this field.

A Comprehensive Review on the Boosted Effects of Anion Vacancy in the Heterogeneous Photocatalytic Degradation, Part II: Focus on Oxygen Vacancy

Environmental problems, including the increasingly polluted water and the energy crisis, have led to a need to propose novel strategies/methodologies to contribute to sustainable progress and enhance human well-being. For these goals, heterogeneous semiconducting-based photocatalysis is introduced as a green, eco-friendly, cost-effective, and effective strategy. The introduction of anion vacancies in semiconductors has been well-known as an effective strategy for considerably enhancing the photocatalytic activity of such photocatalytic systems, giving them the advantages of promoting light harvesting, facilitating photogenerated electron-hole pair separation, optimizing the electronic structure, and enhancing the yield of reactive radicals. This Review will introduce the effects of anion vacancy-dominated photodegradation systems. Then, their mechanism will illustrate how an anion vacancy changes the photodegradation pathway to enhance the degradation efficiency toward pollutants and the overall photocatalytic performance. Specifically, the vacancy defect types and the methods of tailoring vacancies will be briefly illustrated, and this part of the Review will focus on the oxygen vacancy (OV) and its recent advances. The challenges and development issues for engineered vacancy defects in photocatalysts will also be discussed for practical applications and to provide a promising research direction. Finally, some prospects for this emerging field will be proposed and suggested. All permission numbers for adopted figures from the literature are summarized in a separate file for the Editor.

Graphene-based photocatalysts for degradation of organic pollution

Compared with the traditional wastewater treatment technology, semiconductor photocatalysis is a rapidly emerging environment-friendly and efficient Advanced Oxidation Process for degradation of refractory organic contaminants. Single-component semiconductor photocatalysts exhibit poor photocatalytic performance and cannot meet the requirements of wastewater treatment. The combination of semiconductor photocatalysts and Graphene can effectively improve the photocatalytic activity and stability of semiconductor photocatalysts. This review focuses on the synergistic effect of several types of semiconductors with Graphene for photocatalytic degradation of organic pollutants. After a brief introduction of the photodegradation mechanism of semiconductor materials and the basic description of Graphene, the synthesis, characterization and degradation performance of various Graphene-based semiconductor photocatalysts are emphatically introduced.

A smartphone-powered photoelectrochemical POCT via Z-scheme Cu2O/Cu3SnS4 for dibutyl phthalate in the environmental and food

As a major hazardous additive released from microplastics and nanoplastics, identifying dibutyl phthalate (DBP) in complex matrices attracts a growing concern in environmental monitoring and food safety. For the first time, Cu2O/Cu3SnS4 nanoflower is prepared and serves as the photoactive material which can be constructed as a smartphone-based photoelectrochemical (PEC) point-of-care test (POCT). Effectively matching energy levels between Cu2O and Cu3SnS4 accelerated the transfer of photogenerated electron-hole pairs, significantly improving the intelligent PEC POCT performance. The novel Cu2O/Cu3SnS4 has proven to be the Z-scheme heterojunction by density functional theory calculation. A competitive immunoassay has been realized on a Cu2O/Cu3SnS4 modified electrode, dramatically decreasing the photocurrent signal and enhancing POCT sensitivity. The smartphone has been used to record and transfer PEC results. Under optimal conditions, the PEC POCT exhibited a satisfying linear range (0.04-400 ng/mL) and a low detection limit of 7.94 pg/mL in real samples, together with excellent stability, repeatability, reproducibility and selectivity. The PEC POCT system provides good performance and practicability in determining DBP in water and edible oil samples. This proposal provides a practical strategy for the intelligent POCT for environment monitoring and food safety.

Large-Area and Visible-Light-Driven Heterojunctions of In2O3/Graphene Built for ppb-Level Formaldehyde Detection at Room Temperature

Achieving convenient and accurate detection of indoor ppb-level formaldehyde is an urgent requirement to ensure a healthy working and living environment for people. Herein, ultrasmall In₂O₃ nanorods and supramolecularly functionalized reduced graphene oxide are selected as hybrid components of visible-light-driven (VLD) heterojunctions to fabricate ppb-level formaldehyde (HCHO) gas sensors (named InAG sensors). Under 405 nm visible light illumination, the sensor exhibits an outstanding response toward ppb-level HCHO at room temperature, including the ultralow practical limit of detection (pLOD) of 5 ppb, high response (R_a/R_g = 2.4, 500 ppb), relatively short response/recovery time (119 s/179 s, 500 ppb), high selectivity, and long-term stability. The ultrasensitive room temperature HCHO-sensing property is derived from visible-light-driven and large-area heterojunctions between ultrasmall In₂O₃ nanorods and supramolecularly functionalized graphene nanosheets. The performance of the actual detection toward HCHO is evaluated in a 3 m³ test chamber, confirming the practicability and reliability of the InAG sensor. This work provides an effective strategy for the development of low-power-consumption ppb-level gas sensors.

Interfacial elaborating In2O3-decorated ZnO/reduced graphene oxide/ZnS heterostructure with robust internal electric field for efficient solar-driven hydrogen evolution

Solar-driven hydrogen evolution over ZnO-ZnS heterostructures is considered as a promising strategy for sustainable-energy issues. However, the industrialization of this strategy is still constrained by suppressed carrier migration, rapid charge recombination, and the inevitable utilization of noble-metal particles. Herein, we envision a novel strategy of successfully introducing In₂O₃ into the ZnO-ZnS heterostructure. Benefiting from the optimized internal electric field and the charge carrier migration mode based on the direct Z-scheme, the interfacial elaborating In₂O₃-decorated ZnO/reduced graphene oxide (rGO)/ZnS heterostructure manifests smooth charge migration, suppressed electron-hole pair recombination, and increased surface active sites. More importantly, the in situ introduction of In₂O₃ optimizes the construction of the internal electric field, favoring directional light-triggered carrier migration. As a result, the light-induced electrons generated from the heterostructure can be efficiently employed for the hydrogen evolution reaction. Hence, this work would shed light on the in situ fabrication of noble-metal-free photocatalysts for solar-driven water splitting.

In Situ Tracking of Crystal-Surface-Dependent Cu2O Nanoparticle Dissolution in an Aqueous Environment

Metal-oxide-based nanoparticles (MONPs) such as Cu₂O NPs have attracted growing attention, but the potential discharges of MONPs have raised considerable concern of their environmental fate including their dissolution behavior. The impacts of morphology on MONP dissolution are largely uncertain due to the lack of in situ tracking techniques. In this study, we combined a series of in situ technologies including liquid-cell transmission electron microscopy and fluorescence probes to reveal the in situ dissolution process of Cu₂O NPs in freshwater. Our results suggest that cubic Cu₂O NPs exhibit a higher dissolution quantity compared with spherical NPs of the same surface area. The difference was mainly related to the crystal surface, while other factors such as particle size or aggregation status showed minor effects. Importantly, we demonstrated the simultaneous growth of new small NPs and the dissolution of pristine Cu₂O NPs during the dissolution of Cu₂O NPs. Cubic Cu₂O NPs became much less soluble under O₂-limited conditions, suggesting that O₂ concentration largely affected the dependence of dissolution on the NP morphology. Our findings highlight the potential application of in situ techniques to track the environmental fates of MONPs, which would provide important information for assessing the ecological risks of engineered NPs.

Photoelectrochemical Enhancement of Cu2O by a Cu2Te Hole Transmission Interlayer

Cuprous oxide (Cu₂O) films are electrodeposited on fluorinated tin oxide (FTO) substrates with controlled crystallographic orientation and optimized film thickness. The Cu₂O films exhibit a (100)-to-(111) texture change and a pyramid-to-cuboidal crystallite morphology transformation by increasing the electrodeposition current density. The cuboidal crystallites enclosed by (100) sidewalls and (111) truncated surfaces demonstrate better photoelectrochemical property than the pyramid crystallites. By introducing a copper(I) telluride (Cu₂Te) layer in between Cu₂O and FTO, the photocurrent density increases 70% for the (111)-textured Cu₂O film in a 1 M Na₂SO₄ solution under AM1.5 G illumination. The enhancement is mainly attributed to the improved separation of photocarriers in the illuminated Cu₂O film by pumping hole carriers to the Cu₂Te layer. In contrast to typical electron pathway management, this study provides an alternative route to improve the photoelectrochemical performance of Cu₂O-based photocathodes through hole pathway modification.

Graphene-based nanocomposites and nanohybrids for the abatement of agro-industrial pollutants in aqueous environments

Incessant release of a large spectrum of agro-industrial pollutants into environmental matrices remains a serious concern due to their potential health risks to humans and aquatic animals. Existing remediation techniques are unable to remove these pollutants, necessitating the development of novel treatment approaches. Due to its unique structure, physicochemical properties, and broad application potential, graphene has attracted a lot of attention as a new type of two-dimensional nanostructure. Given its chemical stability, large surface area, electron mobility, superior thermal conductivity, and two-dimensional structure, tremendous research has been conducted on graphene and its derived composites for environmental remediation and pollution mitigation. Various methods for graphene functionalization have facilitated the development of different graphene derivatives such as graphene oxide (GO), functional reduced graphene oxide (frGO), and reduced graphene oxide (rGO) with novel attributes for multiple applications. This review provides a comprehensive read on the recent progress of multifunctional graphene-based nanocomposites and nanohybrids as a promising way of removing emerging contaminants from aqueous environments. First, a succinct overview of the fundamental structure, fabrication techniques, and features of graphene-based composites is presented. Following that, graphene and GO functionalization, i.e., covalent bonding, non-covalent, and elemental doping, are discussed. Finally, the environmental potentials of a plethora of graphene-based hybrid nanocomposites for the abatement of organic and inorganic contaminants are thoroughly covered.

Urchin-like hybrid nanostructures of CuOx/Fe2O3 from Cu-mediated pyrolysis of Fe-MOFs for catalytic reduction of organic pollutants

MOFs have been widely used as templates to design and construct catalysis materials, such as LDH, metal oxides, and carbon. Herein, we developed a Cu-mediated pyrolysis protocol for the synthesis of urchin-like CuO_x/Fe₂O₃ hybrid nanostructures using Fe-MOFs as the precursor. The hierarchical hybrids were composed of an inner CuO_x-dispersed Fe₂O₃ octahedral matrix covered with radially grown Fe₂O₃ nanorods. This novel hierarchical hybrid nanostructure was generated likely due to the difference in the inward contraction rates between the Cu and Fe species during pyrolysis. Given the structural and compositional benefits, the urchin-like CuO_x/Fe₂O₃ hybrids exhibited outstanding catalytic activity for the chemical reduction of 4-nitrophenol (4-NP) and dyes. Besides, CuO_x/Fe₂O₃ was found to be highly catalytic in the reduction of 4-NP even after 30 consecutive runs, manifesting outstanding durability for continuous operation.

Opto-Electronic Characterization of Photocatalysts Based on p,n-Junction Ternary and Quaternary Mixed Oxides Semiconductors (Cu2O-In2O3 and Cu2O-In2O3-TiO2)

Semiconductor materials are the basis of electronic devices employed in the communication and media industry. In the present work, we report the synthesis and characterization of mixed metal oxides (MOs) as p,n-junction photocatalysts, and demonstrate the correlation between the preparation technique and the properties of the materials. Solid-state UV-visible diffuse reflectance spectroscopy (UV-VIS DRS) allowed for the determination of the light absorption properties and the optical energy gap. X-ray photoelectron spectroscopy (XPS) allowed for the determination of the surface speciation and composition and for the determination of the valence band edge. The opto-electronic behavior was evaluated measuring the photocurrent generated after absorption of chopped visible light in a 3-electrode cell. Scanning electron microscopy (SEM) measurements allowed for auxiliary characterization of size and morphology, showing the formation of composites for the ternary Cu2O-In2O3 p,n-mixed oxide, and even more for the quaternary Cu2O-In2O3-TiO2 MO. Light absorption spectra and photocurrent-time curves mainly depend upon the composition of MOs, while the optical energy gap and defective absorption tail are closely related to the preparation methodology, time and thermal treatment. Qualitative electronic band structures of semiconductors are also presented.

In2S3 nanoparticles coupled to In-MOF nanorods: The structural and electronic modulation for synergetic photocatalytic degradation of Rhodamine B

Enhancing photocatalytic performance via electronic modulation have attracted much attention for synergetic photocatalytic degradation of antibiotic pollutant. In this study, a new hetero-structured system is raised, which comprises In₂S₃ coupled to In-MOF and operates as an efficient photocatalyst for RhB degradation. The formation of hetero-structure and occurred electron modulation of In₂S₃/In-MOF hybrid was confirmed by relevant characterizations. Surprisingly, the In₂S₃/In-MOF hybrid represented enhanced photocatalytic ability over In-MOF. The photocatalysis of Rhodamine B in presence of In₂S₃/In-MOF hybrid has achieved 92.2 % degradation.

Fabrication of novel Cu2WS4/NiTiO3 heterostructures for efficient visible-light photocatalytichydrogen evolution and pollutant degradation

The design and development of efficient and durable catalysts with visible-light response for photocatalytic hydrogen production and pollutants degradation is considered as one of the most challenging tasks. In present work, a novel Cu₂WS₄/NiTiO₃ (abbreviated as × CWS/NTO; x  = 0.25, 0.50, 0.75 and 1.00) composite was prepared via a facile electrospinning/calcination technique along with a convenient hydrothermal method. The as-prepared CWS/NTOcomposite was composed of 2D CWS nanosheets and 1D NTO nanofibers manifested by SEM and TEM images. The results of XPS verified the interfacial interaction between CWS and NTO, confirming the heterojunction formation in CWS/NTOcomposite. Photocatalytic tests demonstrated as-prepared CWS/NTO catalysts exhibited outstanding and stable photocatalytic performances for H₂ production and pollutants degradation under visible light (λ > 420 nm) irradiation. Specially, 0.50 CWS/NTO sample displayed the highest H₂-evolution activity of 810 μmol·g^-1·h^-1 with the apparent quantum efficiency (AQE) value of 1.65 % at 420 nm. Additionally, it also exhibited the optimal photodegradation properties with the rate constants of 0.030, 0.413 and 0.028 min^-1 for TC, RhB and Cr(VI), respectively. The excellent catalytic activities could be attributed to the enhanced visible-light adsorption, high specific surface area and efficient separation of photogenerated charge carriers. The ESR tests and free radicals capturing experiments confirmed that ·O₂^- and h⁺ were primary active species for TC/RhB degradation. Eventually, the probable catalytic mechanism was put forward and detailly analysed. The present work provides perspectives of rational design on NiTiO₃-based catalysts with superior photocatalytic performance for energy regeneration and environmental remediation.

Instructive analysis of engineered carbon materials for potential application in water and wastewater treatment

Water remediation is an essential component for sustainable development. Increasing population and rapid industrialization have contributed to the deterioration of water resources. In particular, effluents from chemical, pharmaceutical, petroleum industries, and anthropogenic activities have led to severe ecological degradation. Many of these detrimental pollutants are highly toxic even at low concentrations, acting as carcinogens and inflicting severe long-lasting effects on human health. This review underscores the potential applications of engineered carbon-based materials for effective wastewater treatment. It focuses on the performance as well as efficiency of activated carbon, graphene nanomaterial, and carbon nanotubes, both with and without chemical functionalization. Plausible mechanisms of action between the chemically functionalized adsorbent and pollutants are also discussed. Based on the keywords from the literature published in the recent five years, a statistical practicality-vs-applicability analysis of these three materials is also provided. The review will provide a deep understanding of the physical or chemical interactions of the wastewater pollutants with carbon materials.

Photoenhanced Water Electrolysis in Separate O2 and H2 Cells Using Pseudocapacitive Electrodes

Water electrolysis has received much attention in recent years as a means of sustainable H₂ production. However, many challenges remain in obtaining high-purity H₂ and making large-scale production cost-effective. This study provides a strategy for integrating a two-cell water electrolysis system with solar energy storage. In our proposed system, CuO-Cu(OH)₂/Cu₂O was used as a redox mediator between oxygen and hydrogen evolution components. The system not only overcame the gas-mixing issue but also showed high gas generation performance. The redox reaction (charge/discharge) of CuO-Cu(OH)₂/Cu₂O led to a significant increase (51%) in the initial rate of H₂ production from 111.7 μmol h^-1 cm^-2 in the dark to 168.9 μmol h^-1 cm^-2 under solar irradiation. The effects of light on the redox reaction of CuO-Cu(OH)₂/Cu₂O during water electrolysis were investigated by in situ X-ray absorption and photoemission spectroscopy. These results suggest that surface oxygen vacancies are created under irradiation and play an important role in increased capacitance and gas generation. These findings provide a new path to direct storage of abundant solar energy and low-cost sustainable hydrogen production.

Core-shell ZIF-8@MIL-68(In) derived ZnO nanoparticles-embedded In2O3 hollow tubular with oxygen vacancy for photocatalytic degradation of antibiotic pollutant

Developing a novel core-multishelled metal oxide hollow tube with rich oxygen vacancy is highly attractive in photocatalytic degradation of antibiotic pollutant. Herein, ZnO@In₂O₃ core-shell hollow microtubes were synthesized via one-step calcination of ZIF-8@MIL-68(In) formed by an in-situ self-assembly. TEM images demonstrate that 0D ZnO quantum dots (QDs) shell with 0.2 µm were well coated on the surface of 1D In₂O₃ hollow tube as the core with 1.2 µm. The synthesized heterostructure indicates the enhanced photocatalytic performance in tetracycline (TC) degradation compared with single ZIF-derived ZnO and MIL-68(In)-derived In₂O₃ under simulated solar irradiation. Besides, organic pollutants including malachite green (MG), methylene blue (MB) and rhodamine B (RhB) are further used to evaluate the photocatalytic activity of ZnO@In₂O₃, and the effect of weight ratios between ZnO and In₂O₃ on degradation efficiency is also studies. The ZnO@In₂O₃ heterojunction can provide higher specific surface area, expose more active sites, possess appropriate number of oxygen vacancies, enhance light absorption and further effectively boost the transfer and separation of photoinduced charge carriers. In addition, the proposed photocatalytic mechanism and degradation pathway are discussed in detail based on active species trapping test, electron spin resonance (ESR) and LCMS.

Construction of Porous Tubular In2S3@In2O3 with Plasma Treatment-Derived Oxygen Vacancies for Efficient Photocatalytic H2O2 Production in Pure Water Via Two-Electron Reduction

Tubular In₂O₃ was fabricated by the annealing of In-MIL-68 and further treated by Ar plasma to yield oxygen vacancies (O_v) followed by the growth of In₂S₃ nanoflowers. Unexpectedly, the resulting porous In₂S₃@In₂O₃ composites were discovered to display a broad visible-light response and especially enhanced capacities for efficient photocatalytic production of H₂O₂ in pure water, with a rate of 4.59 μmol·g^-1·min^-1. An apparent quantum yield of 28.9% at 420 nm can also be expected without the use of noble metals or organic scavengers. Herein, the high light utilization might be profited from their porous tubular heterostructure for powerful "light captivity". Moreover, the Ar plasma-derived O_v sites on the composites might tune the H₂O₂ generation route from the single-electron reduction to the two-electron one toward the significantly enhanced photocatalysis, as validated by the Koutecky-Levich plots. This work demonstrates a new perspective of designing porous heterostructures with the advantages of high light harvest and plasma-derived O_v active sites. Importantly, it may provide a promising defect-induced strategy of two-electron reduction triggered by the plasma treatment for the efficient photocatalytic H₂O₂ production under visible light.

Self-Circulation Oxygen-Hydrogen Peroxide-Oxygen System for Ultrasensitive Cathode Photoelectrochemical Bioassay Using a Stacked Sealed Paper Device

In this work, a self-circulation oxygen-hydrogen peroxide-oxygen (O₂-H₂O₂-O₂) system with photogenerated electrons as fuel and highly active hemin monomers as operators was engineered for ultrasensitive cathode photoelectrochemical bioassay of microRNA-141 (miRNA-141) using a stacked sealed paper device. During the circulation, the photogenerated electrons from BiVO₄/Cu₂O photosensitive structures assembled on a reduced graphene oxide paper electrode first reduced the electron acceptors (dissolved O₂) to H₂O₂, which was then catalytically decomposed by hemin monomers to generate O₂ again. The regenerated O₂ continued to be reduced, which made O₂ and H₂O₂ stuck in the infinite loop of O₂-H₂O₂-O₂ accompanied by the fast consumption of photogenerated electrons, generating an amplified photocurrent signal. When a target existed, a duplex-specific nuclease-induced target recycling reaction with dual trigger DNA probes as the output was performed to initiate the assembly of bridge-like DNA nanostructures, which endowed the self-circulation system with dual destruction functions as follows. (i) Reduced fuel supply: the assembled DNA bridges acting as a negatively charged barrier prevented the photogenerated electrons from participating in the O₂ reduction to H₂O₂. (ii) Incapacitation of operators: DNA bridging induced the dimerization of hemin monomers linked on the DNA hairpins to catalytically inactive hemin dimers, leading to the abortive regeneration of O₂. These destruction functions resulted in the circulation interruption and a remarkably decreased photocurrent signal. Thus, the developed cathode photoelectrochemical biosensing platform achieved ultrasensitive miRNA-141 detection with a linear range of 0.25 fM to 1 nM and a detection limit of 83 aM, and it also exhibited high accuracy, selectivity, and practicability.

Oxygen vacancy engineering of cerium oxide for the selective photocatalytic oxidation of aromatic pollutants

The engineering of oxygen vacancies in CeO₂ nanoparticles (NPs) allows the specific fine-tuning of their oxidation power, and this can be used to rationally control their activity and selectivity in the photocatalytic oxidation (PCO) of aromatic pollutants. In the current study, a facile strategy for generating exceptionally stable oxygen vacancies in CeO₂ NPs through simple acid (CeO₂-A) or base (CeO₂-B) treatment was developed. The selective (or mild) PCO activities of CeO₂-A and CeO₂-B in the degradation of a variety of aromatic substrates in water were successfully demonstrated. CeO₂-B has more oxygen vacancies and exhibits superior photocatalytic performance compared to CeO₂-A. Control of oxygen vacancies in CeO₂ facilitates the adsorption and reduction of dissolved O₂ due to their high oxygen-storage ability. The oxygen vacancies in CeO₂-B as active sites for oxygen-mediated reactions act as (i) adsorption and reduction reaction sites for dissolved O₂, and (ii) photogenerated electron scavenging sites that promote the formation of H₂O₂ by multi-electron transfer. The oxygen vacancies in CeO₂-B are particularly stable and can be used repeatedly over 30 h without losing activity. The selective PCOs of organic substrates were studied systematically, revealing that the operating mechanisms for UV-illuminated CeO₂-B are very different from those for conventional TiO₂ photocatalysts. Thus, the present study provides new insights into the design of defect-engineered metal oxides for the development of novel photocatalysts.

Atomic-Level and Modulated Interfaces of Photocatalyst Heterostructure Constructed by External Defect-Induced Strategy: A Critical Review

Despite the existence of numerous photocatalyst heterostructures, their separation efficiency and charge flow precision remain low due to the poor study on interfacial properties. The photocatalysts with confined defects can effectively control the photogenerated carrier migration, but the metastability of such defects considerably decreases the photocatalyst stability. Meanwhile, the introduction of defective region can increase the coordinative unsaturation and delocalize local electrons to promote their interactions with the molecules/ions in that region. The selective growth of modulated heterogeneous interface by defect-induced strategy may not only increase the stability of defective structures, but also enhance the migration of interfacial charges. Using this method, photocatalytic heterostructures with low contact resistances and intimate interfaces are constructed to achieve the optimal charge migration in terms of efficiency and accuracy. In this work, the point, linear, and planar heterogeneous interfaces and related defect engineering techniques are discussed. Particularly, it is focused on the external, defect-induced interfacial heterogeneities with various spatial and dimensional configurations, which exhibit modulated and controllable interfacial properties. Furthermore, the main aspects of fabricating photocatalyst heterostructures by the defect-induced strategy, including the i) controllable generation of defects, ii) advanced characterization methods, and iii) elaborate construction of the minimal interface, are described.

Cu2O–reduced graphene oxide composite as a high-performance electrocatalyst for oxygen evolution reaction in alkaline media

Ethylene glycol was used as an inexpensive and nontoxic reducing agent to synthesize a Cu2O–reduced graphene oxide (Cu2O–rGO) composite. This material exhibited good electrocatalytic oxygen generation performance.

Mildly acidic pH and room temperature triggered peroxidase-mimics of rGO–Cu3(OH)2(MoO4)2 cuboidal nanostructures: an effective colorimetric detection of neurotransmitter dopamine in blood serum and urine samples

Graphical representation of dopamine detection.

Azobenzene-modified Ag/Ag2O/CN photocatalysts with photoresponsive performance for controllable photodegradation of tetracyclines

In this work, an Azo@Ag/Ag₂O/CN composite photocatalyst with light-responsive performance was successfully prepared by precipitation and emulsion polymerization. Azo@Ag/Ag₂O/CN exhibits cis-trans isomerism under different light exposures.

Solar light driven photocurrent generation and catalytic disintegration of toxic compounds and ions using Au@Sn, F-doped In2O3 core–shell nanostructure

A detailed description of the catalytic activity and charge carrier generation in Au@tin and fluorine-doped In2O3 core-shell nanoparticles.

Synthesis and Characterization of p-n Junction Ternary Mixed Oxides for Photocatalytic Coprocessing of CO2 and H2O

In the present paper, we report the synthesis and characterization of both binary (Cu2O, Fe2O3, and In2O3) and ternary (Cu2O-Fe2O3 and Cu2O-In2O3) transition metal mixed-oxides that may find application as photocatalysts for solar driven CO2 conversion into energy rich species. Two different preparation techniques (High Energy Milling (HEM) and Co-Precipitation (CP)) are compared and materials properties are studied by means of a variety of characterization and analytical techniques UV-Visible Diffuse Reflectance Spectroscopy (UV-VIS DRS), X-ray Photoelectron Spectroscopy (XPS), X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM), and Energy Dispersive X-Ray spectrometry (EDX). Appropriate data elaboration methods are used to extract materials bandgap for Cu2O@Fe2O3 and Cu2O@In2O3 prepared by HEM and CP, and foresee whether the newly prepared semiconductor mixed oxides pairs are useful for application in CO2-H2O coprocessing. The experimental results show that the synthetic technique influences the photoactivity of the materials that can correctly be foreseen on the basis of bandgap experimentally derived. Of the mixed oxides prepared and described in this work, only Cu2O@In2O3 shows positive results in CO2-H2O photo-co-processing. Preliminary results show that the composition and synthetic methodologies of mixed-oxides, the reactor geometry, the way of dispersing the photocatalyst sample, play a key role in the light driven reaction of CO2–H2O. This work is a rare case of full characterization of photo-materials, using UV-Visible DRS, XPS, XRD, TEM, EDX for the surface and bulk analytical characterization. Surface composition may not be the same of the bulk composition and plays a key role in photocatalysts behavior. We show that a full material knowledge is necessary for the correct forecast of their photocatalytic behavior, inferred from experimentally determined bandgaps.

Progress in Graphene/Metal Oxide Composite Photocatalysts for Degradation of Organic Pollutants

The sewage discharge of industrial wastewater seriously pollutes the water source and rivers, which is very harmful to the health of humans and wildlife. Among those methods for treating wastewater, photocatalysis is a sustainable and environmental-friendly technique for removing the organic pollutants with no secondary pollution. As a popular photocatalyst, graphene/metal oxide nanocomposites have been widely reported in the photocatalysis field. In this review, the recent progress of graphene/metal oxide composites including binary and ternary composites is summarized in detail. The synthesis, microstructure design, and application performance of graphene/TiO2, graphene/ZnO, graphene/SnO2, graphene/WO3, graphene/Fe2O3, and graphene/Cu2O composites are introduced firstly. Then, the synthesis, the selection of components, and the performance of various ternary composites are summarized specifically, including graphene/TiO2-, graphene/ZnO-, graphene/SnO2-, graphene/Cu2O-, graphene/FexOy-, and graphene/Bi-containing ternary composites. At last, the possible research directions of graphene/metal oxide nanocomposites are put forward. The main purpose is to provide a theoretical guidance for designing high-performance graphene/metal oxide photocatalysts for wastewater treatment.

Hummers' and Brodie's graphene oxides as photocatalysts for phenol degradation

Undoped metal-free graphene oxide (GO) materials prepared by either a modified Hummers' (GO-H) or a Brodie's (GO-B) method were tested as photocatalysts in aqueous solution for the oxidative conversion of phenol. In the dark, the adsorptive capacity of GO-B towards phenol (~35%) was higher than that of GO-H (~15%). Upon near-UV/Vis irradiation, GO-H was able to remove 21% of phenol after 180 min, mostly through adsorption. On the other hand, by using less energetic visible irradiation, GO-B removed as much as 95% in just 90 min. By thorough characterization of the prepared materials (SEM, HRTEM, TGA, TPD, Raman, XRD, XPS and photoluminescence) the observed performances could be explained in terms of their different surface chemistries. The GO-B presents the lower concentration of oxygen functional groups (in particular carbonyl groups as revealed by XPS) and it has a considerably higher photocatalytic activity compared to GO-H. Photoluminescence (PL) of liquid dispersions and XRD analysis of powders showed lower PL intensity and smaller interlayer distance for GO-B relative to GO-H, respectively: this suggests lower electron-hole recombination and enhanced electron transfer in GO-B, in support of its boosted photocatalytic activity. Reusability tests showed no efficiency loss after a second usage cycle and over three runs under visible irradiation, which was in line with the similarity of the XPS spectra of the fresh and used GO-B materials. Moreover, scavenging studies revealed that holes and hydroxyl radicals were the main reactive species in play during the photocatalytic process. The obtained results, establish for the first time, that GO prepared by Brodie's method is an active and stable undoped metal-free photocatalyst for phenol degradation in aqueous solutions, opening new paths for the application of more sustainable and metal-free materials for water treatment solutions.

Performance optimization of CdS precipitated graphene oxide/polyacrylic acid composite for efficient photodegradation of chlortetracycline

Here a CdS embedded poly acrylic acid (PAA)/graphene oxide (GO) polymeric composite was prepared for the efficient degradation of chlortetracycline (CTC) driven by visible light irradiation. The structure-activity relationship of GO/PAA-CdS was confirmed through the photocatalytic evaluation of a series of samples prepared by varying GO concentration, molar ratio of Cd:S and the amount of crosslinking agent. Through the composition, morphology, photoelectrochemical characterizations and degradation kinetic studies, it could be confirmed that the enhanced photocatalytic activity is attributed to the controlled growth of CdS nanoparticles by polymer net structure and effective electron transfer along GO nanosheets. The photodegradation of CTC was confirmed to be mainly governed by O₂^- and OH radicals generated from GO/PAA-CdS. The degradation intermediates of CTC were confirmed by LC-MS, and possible degradation pathways were proposed based on the prediction of radical attacking sites according to Fukui function values obtained through Density Functional Theory (DFT). Moreover, it was found that the catalytic activity of the photocatalyst was maintained after several cycles confirming the enhanced anti-photocorrosion of GO/PAA-CdS. This research provided an efficient approach by a novel photocatalyst for the removal of CTC from wastewater.

Synthesis of V-doped In2O3 Nanocrystals via Digestive-Ripening Process and Their Electrocatalytic Properties in CO2 Reduction Reaction

The development of synthetic methods for monodisperse nanomaterial is of great importance in science and technology related to nanomaterials. The strong demands to prepare exceptionally monodisperse nanocrystals have made digestive-ripening one of the most sought-after size-focusing processes. Although digestive-ripening processes have been demonstrated to produce various metals and semiconductors, their applicability to oxides has rarely been studied despite various unique properties and applications of oxide nanomaterials. In this work, we demonstrate the successful synthesis of monodisperse V-doped In₂O₃ nanocrystals via a modified digestive-ripening process. The nanocrystals have truncated octahedral shape faceted with eight (222) and six (220) planes. To the best of our knowledge, this is the first report on the digestive-ripening synthesis of highly symmetrical doped oxide nanocrystals. Moreover, V-doped In₂O₃ nanocrystals exhibit electrocatalytic activities for CO₂ electrochemical reduction and produce CH₃OH, which has not been attainable from previously reported electrocatalysts based on indium or indium oxide. This distinctive catalytic property of V-doped In₂O₃ is attributed to the presence of V-dopants in the In₂O₃ host. Our demonstration has important implications for both nanocrystal synthesis and electrocatalyst development.

Facile thermal exfoliation of Cu sheets towards the CuO/Cu2O heterojunction: a cost-effective photocatalyst with visible-light response for promising sustainable applications

Unlike semiconductors, metals, especially the Cu element, usually show preeminent ductility and thermal expansivity; accordingly, herein, we report thermal treatment of a commercial copper sheet in air to obtain a black mass, i.e. CuO/Cu2O with a heterojunction, which has been proven to be a photocatalyst. Rapid cooling of the hot sheet detached/knocked off the oxidized layers from the sheet as a powder. The extent of the formation of copper oxides was determined by electrochemical impedance spectroscopy and transient photocurrent responses; in addition, other physical methods for the characterization of the catalyst were performed, and the catalyst exhibited applications in the mineralization of the rhodamine B (RhB) dye, a potential pollutant in water bodies. Moreover, the well-matched band structures of CuO/Cu2O manifested that CuO and Cu2O could serve as reduction sites and hole oxygen sites to generate the ·O2 - and ·OH species, respectively, which were subsequently affirmed by the DMPO electron spin resonance technique. In this study, we proposed a novel perspective towards the design of heterogeneous photocatalysts for organic pollutant treatment through a convenient solid-phase synthesis rather than a complicated liquid-phase synthesis. In addition to this, the resultant CuO/Cu2O photocatalyst proposed herein might inspire the researchers to focus on the preparation of more cost-effective photocatalysts for commercialization rather than complicated nanocomposites for pure theoretical research.

Catalysis of Organic Pollutants Abatement Based on Pt-Decorated Ag@Cu2O Heterostructures

Pt-decorated Ag@Cu2O heterostructures were successfully synthesized using a simple and convenient method. The Pt nanoparticle density on the Ag@Cu2O can be controlled by changing the concentration of the Pt precursor. The synthesized Ag@Cu2O-Pt nanoparticles exhibited excellent catalytic performance, which was greatly affected by changes in the Ag@Cu2O-Pt structure. To optimize the material's properties, the synthesized Ag@Cu2O-Pt nanoparticles were used to catalyze toxic pollutants and methyl orange (MO), and nontoxic products were obtained by catalytic reduction. The Pt-decorated Ag@Cu2O nanoparticles showed excellent catalytic activity, which significantly decreased the pollutant concentration when the nanoparticles were used for catalytic reduction. The redistribution of charge transfer is the nanoparticles' main contribution to the catalytic degradation of an organic pollutant. This Pt-decorated Ag@Cu2O material has unique optical and structural characteristics that make it suitable for photocatalysis, local surface plasmon resonance, and peroxide catalysis.

Grain Boundary Interfaces Controlled by Reduced Graphene Oxide in Nonstoichiometric SrTiO3-δ Thermoelectrics

Point defect or doping in Strontium titanium oxide (STO) largely determines the thermoelectric (TE) properties. So far, insufficient knowledge exists on the impact of double Schottky barrier on the TE performance. Herein, we report a drastic effect of double Schottky barrier on the TE performance in undoped STO. It demonstrates that incorporation of Reduced Graphene Oxide (RGO) into undoped STO weakens the double Schottky barrier and thereby results in a simultaneous increase in both carrier concentration and mobility of undoped STO. The enhanced mobility exhibits single crystal-like behavior. This increase in the carrier concentration and mobility boosts the electrical conductivity and power factor of undoped STO, which is attributed to the reduction of the double Schottky barrier height and/or the band alignment of STO and RGO that allow the charge transfer through the interface at grain boundaries. Furthermore, this STO/RGO interface also enhances the phonon scattering, which results in low thermal conductivity. This strategy significantly increases the ratio of σ/κ, resulting in an enhancement in ZT as compared with pure undoped STO. This study opens a new window to optimize the TE properties of many candidate materials.

Three-dimensionally ordered hollow sphere array Pt/In2O3–TiO2 with improved photocatalytic efficiency

Using polystyrene microspheres as the template, the three-dimensionally ordered hollow sphere array Pt/In₂O₃–TiO₂ was established, which exhibited superior photocatalytic degradation efficiency and an enhanced activity in hydrogen evolution.

Enhanced optical properties of Cu2O anchored on reduced graphene oxide (rGO) sheets

In this report, Cu₂O and Cu₂O/rGO nanocomposites were successfully synthesized through chemical reduction method using glucose as a reducing agent for GO. The x-ray diffraction and field emission scanning electron microscope was used to investigate the phase composition and microstructure of the as-prepared materials. The presence of different functional groups in the as-synthesized sample was analyzed by Fourier transform infrared spectroscopy. Raman spectroscopy was used to confirm structural aspects such as defects of synthesized Cu₂O/rGO nanocomposites. The optical properties of the as-prepared samples were analyzed by UV-vis diffuse reflectance spectroscopy and photoluminescence spectroscopy. Urbach energy is calculated in order to find out the defects in the nanocomposites. Zeta potential analysis was done to study the surface charge and stability of the as-synthesized samples. These results show that the content of rGO introduced into nanocomposite improves the optical properties of Cu₂O thereby enhancing the utilization of visible light.