Red-Emissive Carbon Dots for Fingerprints Detection by Spray Method: Coffee Ring Effect and Unquenched Fluorescence in Drying Process

In situ coupling of carbon dots with zeolitic imidazolate frameworks enabling highly red emission in solid state

In this work, an extraordinary solid red emissive phosphor was prepared based on red-emitting carbon dots (R-CDs). The synthesis was conducted under an in-situ strategy, with assistance of zeolitic imidazolate frameworks. The obtained phosphor possesses a stronger red emission located at 630 nm in solid state, with CIE coordinate of (0.63, 0.35) and quantum yield of ∼ 45 %. As a consequence, not only aggregation-induced fluorescence quenching of R-CDs is avoided in solid state, but also an enhanced emission with high quantum yield is presented. Fluorescence properties were further explored in detail. The emission is found to be responsive to temperature and applied pressure. Based on the excellent emissive performance, the material has great potentials in anti-counterfeiting, latent fingerprint imaging, and temperature/pressure-sensing. This work provides a facile and promising way of preparing solid carbon-based phosphors for special applications.

Heavy Metal Detection and Removal by Composite Carbon Quantum Dots/Ionomer Membranes

The combination of ion exchange membranes with carbon quantum dots (CQDs) is a promising field that could lead to significant advances in water treatment. Composite membranes formed by sulfonated poly(ether ether ketone) (SPEEK) with embedded CQDs were used for the detection and removal of heavy metal ions, such as lead and cadmium, from water. SPEEK is responsible for the capture of heavy metals based on the cation exchange mechanism, while CQDs detect their contamination by exhibiting changes in fluorescence. Water-insoluble "red" carbon quantum dots (rCQDs) were synthesized from p-phenylenediamine so that their photoluminescence was shifted from that of the polymer matrix. CQDs and the composites were characterized by several techniques: FTIR, Raman, UV/VIS, photoluminescence, XPS spectroscopies, and AFM microscopy. The heavy metal ion concentration was analyzed by inductively coupled plasma-optical emission spectroscopy (ICP-OES). The concentration ranges were 10.8-0.1 mM for Pb2+ and 10.0-0.27 mM for Cd2+. SPEEK/rCQDs showed a more pronounced turn-off effect for lead. The composite achieved 100% removal efficiency for lead and cadmium when the concentration was below a half of the ion exchange capacity of SPEEK. The regeneration of membranes in 1 M NaCl was also studied. A second order law was effective to describe the kinetics of the process.

Designing cellulose nanofibrils/carbon dots intelligent label with colorimetric and fluorescent dual responsiveness for real-time monitoring of food freshness

This study utilized 1,2,4-triaminobenzene dihydrochloride and NaOH as precursors to prepare the pH optical sensor based on carbon dots (CDs). By incorporating CDs into pineapple peel cellulose nanofibrils (CNF) matrix, an intelligent label (CNF/CDs label) with colorimetric and fluorescent dual responsiveness was created for real-time monitoring of food freshness. The CNF/CDs labels exhibited remarkable sensitivity and recognizability towards pH changes from 1 to 12. They also demonstrated excellent reversibility during acid-alkali cycling. Moreover, these labels exhibited exceptional responsiveness to the alkaline and acidic gas environments formed by ammonium hydroxide and acetic acid solutions, respectively. These responses were visually distinguishable through visible color changes and ultraviolet (UV) fluorescence alterations. Encouragingly, the developed labels were successfully applied to monitor the freshness of prawns and fruits, enabling timely assessment of food freshness levels. The dual-mode response of color and fluorescence provided double assurance for the accuracy of the results.

Red Emitting Solid-State CDs/PVP with Hydrophobicity for Latent Fingerprint Detection

Fluorescent carbon dots (CDs) are a new type of photoluminescent nanomaterial. Solid-state CDs usually undergo fluorescence quenching due to direct π-π* interactions and superabundant energy resonance transfer. Therefore, the preparation of solid-state fluorescent CDs is a challenge, especially the preparation of long wavelength solid-state CDs. In this research, long wavelength emission CDs were successfully synthesized by solvothermal methods, and the prepared CDs showed good hydrophobicity. The composite solid-state CDs/PVP (Polyvinyl pyrrolidone) can emit strong red fluorescence, and the quantum yield (QY) of the CDs/PVP powder reaches 18.9%. The prepared CDs/PVP solid-state powder was successfully applied to latent fingerprint detection. The results indicate that the latent fingerprints developed by CDs/PVP powder have a fine definition and high contrast visualization effect, which proves that the prepared CDs/PVP has great application potential in latent fingerprint detection. This study may provide inspiration and ideas for the design of new hydrophobic CDs.

p-Phenylenediamine-derived carbon nanodots for probing solvent interactions

Carbon nanodots, the luminescent nanoparticles of carbon with size restriction below 10 nm, have attracted inordinate attention in materials science due to their widespread applications in optoelectronic and biological fields. Low toxicity and facile synthesis pathways render them favourites in the above-mentioned areas in the context of green chemistry. This work presents fine applications of p-phenylenediamine-derived carbon nanodots (PD-CNDs) achieved via a facile one-pot hydrothermal method. Adequate characterization using X-ray diffraction and spectroscopic and microscopic studies confirmed spherical particles with an average particle size of 2.8 nm, functionalised with amino, carboxyl, and hydroxyl groups. The carbon framework was functionalised with pyridinic and pyrrolic nitrogens. Upon 365 nm UV light illumination, an aqueous dispersion of PD-CNDs showed red-orange fluorescence. Detailed spectral analysis using UV-visible absorption and fluorescence spectroscopy identified edge states and surface groups as luminescent centres, with a significant contribution arising from the latter. The investigation conducted using a collection of solvents, categorized into polar and nonpolar, indicated the potential of the system for applications based on its solvatochromic nature. The feature enabled the determination of different polarity parameters of the solvents, as well as dielectric constants of solvents and solvent mixtures, with considerable accuracy. The system was potent for predicting the composition of a given pair of solvents. The service of the system is also extended for moisture sensing in organic solvents within an error percentage < 1. High quantum yield values (0.61) combined with solvent composition-dependent optical features ensure broader applications of the system to probe solvent interactions.

A Dual-Mode Detection Sensor Based on Nitrogen-Doped Carbon Dots for Visual Detection of Fe(III) and Ascorbic Acid via a Smartphone

Accurately and promptly detecting Fe3+ and ascorbic acid (AA) is a crucial objective. In this study, nitrogen-doped carbon dots (N-CDs) were synthesized using a one-step hydrothermal synthesis method with 6,9-diamino-2-ethoxyacridine lactate as the precursor. The introduction of Fe3+ and AA resulted in both fluorescence (FL) quenching and enhancement of the synthesized N-CDs. The fluorescent response of the N-CDs probe to Fe3+ was observed in the concentration range of 5-20 µM and 25-50 µM, with a limit of detection (LOD) of 290 nM. Remarkably, the fluorescence of the N-CDs was recovered upon the addition of AA to the N-CDs-Fe3+ system. Using the "off-on" fluorescent N-CDs probe, a linear range of 40-90 µM was achieved with an LOD of 0.69 µM. Additionally, the feasibility of employing a smartphone equipped with an RGB Color Picker was demonstrated for the analysis of Fe3+ and AA concentrations, providing a novel visual detection method. Furthermore, the application of N-CDs in solution demonstrated considerable potential for visually detecting Fe3+ and AA. The proposed dual-mode detection sensor was found to be simple, efficient, and stable, enabling the successful determination of Fe3+ and AA in practical samples with satisfactory results.

Harnessing fluorescent carbon quantum dots from natural resource for advancing sweat latent fingerprint recognition with machine learning algorithms for enhanced human identification

Nowadays, it is fascinating to engineer waste biomass into functional valuable nanomaterials. We investigate the production of hetero-atom doped carbon quantum dots (N-S@MCDs) to address the adaptability constraint in green precursors concerning the contents of the green precursors i.e., Tagetes erecta (marigold extract). The successful formation of N-S@MCDs as described has been validated by distinct analytical characterizations. As synthesized N-S@MCDs successfully incorporated on corn-starch powder, providing a nano-carbogenic fingerprint powder composition (N-S@MCDs/corn-starch phosphors). N-S@MCDs imparts astounding color-tunability which enables highly fluorescent fingerprint pattern developed on different non-porous surfaces along with immediate visual enhancement under UV-light, revealing a bright sharp fingerprint, along with long-time preservation of developed fingerprints. The creation and comparison of latent fingerprints (LFPs) are two key research in the recognition and detection of LFPs, respectively. In this work, developed fingerprints are regulated with an artificial intelligence program. The optimum sample has a very high degree of similarity with the standard control, as shown by the program's good matching score (86.94%) for the optimal sample. Hence, our results far outperform the benchmark attained using the conventional method, making the N-S@MCDs/corn-starch phosphors and the digital processing program suitable for use in real-world scenarios.

Preparation of Multicolor Fluorescent Carbon Dots Based on Catechol and o-Phthalaldehyde

As the foremost category of carbon materials, carbon dots (CDs) have been extensively applied in many domains because of their special fluorescence features and outstanding biocompatibility. However, in early studies of fluorescent CDs, as the fluorescence wavelength of most CDs was restricted to the blue or green region and was excitation dependent, the application of CDs was limited. In this study, three representative CDs, fluorescing yellow, green, and blue, were synthesized under alkaline, neutral, and acidic circumstances, respectively, while using a hydrothermal method in which catechol and phthalaldehyde acted as carbon sources and methanol functioned as the reaction solvent. The carbon nuclei of the three fluorescent CDs all had comparable graphite structures. The diversity of photoluminescence (PL) emission from these three CDs was attributed mainly to the different sizes of the sp² conjugated structures among them. Mixing synthesized CDs with epoxy resin, three colors (yellow, green, and blue) of LED using CIE coordinates (0.40, 0.44), (0.33, 0.46), and (0.21, 0.22), respectively, were successfully prepared.

Dual-Mode Undistorted Visual Fluorescent Sensing Strategy through Manipulating the Coffee-Ring Effect on Microfluidic Paper-Based Chip

To overcome the insufficient sensitivity due to distortion of the fluorescent images by mobile devices, we first developed a novel dual-mode strategy for undistorted visual fluorescent sensing on μPAD by technically manipulating the coffee-ring effect of the fluid sample. Based on the manipulating coffee-ring effect, we divided the horizontal direction of the resulting fluorescence image into 600 pixels and obtained more accurate quantitative information to avoid image distortion. The bovine serum albumin-stabilized gold nanoclusters-copper ion complex was used as the fluorescent probe, combined with a small imaging box and a smartphone, to achieve a rapid testing of histidine in human urine. The output image was analyzed in dual mode: RGB numerical analysis in pixel units and the direct measurement of the fluorescent strips length (limit of detection (LOD) is 0.021 and 0.5 mM, respectively), and improved antidistortion for visual fluorescent sensing. This strategy can overcome the distortion of a smartphone-visualized fluorescent image and shows great potential for rapid and convenient analysis.

Perspectives of different colour-emissive nanomaterials in fluorescent ink, LEDs, cell imaging, and sensing of various analytes

In the past 2 decades, multicolour light-emissive nanomaterials have gained significant interest in chemical and biological sciences because of their unique optical properties. These materials have drawn much attention due to their unique characteristics towards various application fields. The development of novel nanomaterials has become the pinpoint for different application areas. In this review, the recent progress in the area of multicolour-emissive nanomaterials is summarized. The different emissions (white, orange, green, red, blue, and multicolour) of nanostructure materials (metal nanoclusters, quantum dots, carbon dots, and rare earth-based nanomaterials) are briefly discussed. The potential applications of different colour-emissive nanomaterials in the development of fluorescent inks, light-emitting diodes, cell imaging, and sensing devices are briefly summarized. Finally, the future perspectives of multicolour-emissive nanomaterials are discussed.

Nanosheets of two-dimensional photoluminescent lanthanide phosphonocarboxylate frameworks decorated with free carboxylic groups for latent fingerprint imaging

The synthesis, structural characterization, exfoliation, and photophysical studies of two-dimensional (2-D) lanthanide phosphonates, named Ln(m-pbc); [Ln(m-Hpbc)(m-H₂pbc)(H₂O)] (Ln = Eu, Tb; m-pbc = 3-phosphonobenzoic acid) based on the phosphonocarboxylate ligand, are reported. These compounds are neutral polymeric 2D layered structures with pendent uncoordinated carboxylic groups between layers. The nanosheets were obtained by a top-down strategy involving sonication-assisted solution exfoliation and characterized by atomic force microscopy and transmission electron microscropy, showing lateral dimensions from nano- to micro-meter scales, and thicknesses down to several layers. The photoluminescence studies demonstrate that the m-pbc ligand acts as an efficient antenna toward Eu and Tb(III) ions. The emission intensities of dimetallic compounds are clearly enhanced after incorporation of Y(III) ions due to the dilution effect. Ln(m-pbc)s were then applied for labelling latent fingerprints. It is worth noting that the reaction between active carboxylic groups and fingerprint residues benefits the labelling, showing efficient imaging for fingerprints on all kinds of material surfaces.

Multi-Stimuli-Responsive Amphiphilic Pyridinium Salt and Its Application in the Visualization of Level 3 Details in Latent Fingerprints

Organic luminescent materials that can simultaneously achieve multimode mechanochromism and its water-vapor-induced recovery are desirable for practical applications but rarely reported. Herein, an amphiphilic compound, 4-(9H-carbazol-9-yl)-1-(2-hydroxyethyl)pyridin-1-ium bromide (CPAB), is designed by integrating a lipophilic aromatic unit and hydrophilic end in the molecular architecture. Self-recovered mechanochromism from brown to cyan is observed upon mechanical grinding in air. Comprehensive research by X-ray diffraction, infrared spectroscopy, and single-crystal analysis reveals that the photoluminescence switch originates from the variation in intermolecular hydrogen bonds and molecular packing mode. The amphiphilic nature of CPAB allows water molecules to enter the crystalline lattice, forming two polymorphs of the crystalline phase, namely CPAB-D and CPAB-W. The hydrosoluble CPAB exhibits excellent capability in probing the level 3 details of fingerprints because its lipophilic part can target the fatty acid residues of fingerprints, leading to strong aggregation-induced fluorescence. The research may inspire the design of latent fingerprint developers and application in forensics/anti-counterfeiting.

Strategy to synthesize long-wavelength emission carbon dots and their multifunctional application for pH variation and arginine sensing and bioimaging

In this work, we designed N and S co-doped carbon dots (N,S-CDs) with long-wavelength emission and their multifunctional application in pH variation, arginine (Arg) sensing, bioimaging in living cells and zebrafish, and fluorescent materials. The N,S-CDs with excitation wavelength-dependent properties were prepared using neutral red (NR) and dl-methionine (DL-Met) as raw materials by one-pot hydrothermal strategy. The N,S-CDs exhibited a unique pH-sensitive luminescence trait within pH range of 3.2-11.0 and have great linear relationship of 4.8-8.0, which indicating their potential application as an imaging reagent in physiological environments. Arg can quench the PL of N,S-CDs due to static quenching. (SQ). The linear range is 2.5-62.5 μM and the LOD is calculated as 0.68 μM. Furthermore, the as-proposed N,S-CDs can be applied as imaging reagents for monitoring of pH and Arg in vivo and vitro owing to outstanding biocompatibility and low cytotoxicity. Interestingly, the N,S-CDs were also used in fluorescent composite films and phosphors owing to exceptional optical properties. All these results indicate that the N,S-CDs have huge potentiality in the areas of fluorescence sensing, bioimaging and fluorescent materials.

The synthesis of carbon dots by folic acid and utilized as sustainable probe and paper sensor for Hg2+ sensing and cellular imaging

In this work, the blue emission carbon dots (FA-CDs) are synthesized by one-pot solvothermal method by using folic acid as precursor. The FA-CDs emitted bright emission at 445 nm when excited at 360 nm with the QY of 31.2 %. The FA-CDs exhibit sensitive quenching response to Hg²⁺ with variable concentrations systematically, which determined FA-CDs can be employed as fluorescent probe, with a reliable linear relationship between fluorescence intensity and Hg²⁺ concentration, and a limit of detection (LOD) of 1.29 nM. Notably, the quenched FA-CDs can be recovered by using EDTA saturated solution with the emission comparable to initial in succession. The FA-CDs based paper sensor can be explored with similar detection performance, and it can also be restored by EDTA saturated solution. Both the restored CDs and paper sensor can be reused in the next turn for detecting Hg²⁺, which allowed the FA-CDs and their paper sensor can be serviced as sustainable probe for Hg²⁺ detection. The visual LOD of paper sensor can be determined at 0.1 μM, notably, the paper sensor can be reused at least 3 times with good performance, which is beneficial to environmental protection and saving resources. Possess excellent water solubility and non-toxic properties, the cellular imaging of FA-CDs was evaluated with excellent quality fluorescent image results. The FA-CDs provide a promising convenient fluorescent probe for multi-application in detection and imaging.

Ratiometric Fluorescence Immunoassay Based on Carbon Quantum Dots for Sensitive Detection of Malachite Green in Fish

Malachite green (MG) is a synthetic poisonous organic compound that has been banned in many countries as a veterinary drug for aquaculture. An efficient, fast and sensitive method is urgently needed for monitoring the illegal use of malachite green (MG) in aquaculture. In this study, a novel ratiometric fluorescence immunoassay was established. Nitrogen-doped carbon quantum dots were used as ratiometric fluorescent probes with a fluorescence peak at 450 nm. Horseradish peroxidase was employed to convert o-phenylenediamine to 2,3-diaminophenazine, with a new fluorescence peak at 580 nm and a strong absorption at 420 nm. The inner filter effect between N-CQD fluorescence and DAP absorption was identified. It allows for the ratiometric detection of MG using a fluorescent immunoassay. The results demonstrated a linear ratiometric fluorescence response for MG between 0.1 and 12.8 ng·mL^-1. The limit of detection of this method was verified to be 0.097 μg·kg^-1 with recoveries ranging from 81.88 to 108%, and the relative standard deviations were below 3%. Furthermore, this method exhibited acceptable consistency with the LC-MS/MS results when applied for MG screening in real samples. These results demonstrated a promising application of this novel ratiometric fluorescence immunoassay for MG screening with the merits of rapid detection, simple sample preparation, and stable signal readout. It can be an alternative to other traditional methods if there are difficulties in the availability of expensive instruments, and achieve comparable results or even more sensitivity than other reported methods.

Surface state dominated and carbon core coordinated red-emitting carbon dots for the detection of Cr2O72- and cell imaging

Cr(VI) as a toxic heavy metal ion can easily enter into the body through drinking or eating and cause liver and kidney diseases as well as cancer. Considering its high biological toxicity and adverse effects on human body, it is desirable to develop a probe to monitor its level in the environment. Herein, a high-efficiency fluorescent nanoprobe based on red emissive carbon dots (R-CDs) was established through a convenient solvothermal strategy. The as-prepared CDs with excitation-independency had the fixed emission wavelength at 627 nm when the excitation wavelength was 560 nm. Further study manifested that the new surface state formed by nitrogen and sulfur doping and the increased conjugated system established through dehydration and carbonization were the main reasons for the fluorescence redshift. In this system, these R-CDs as a fluorescent probe exhibited high specificity and sensitivity to Cr₂O₇^2- with the linear range of 4-40 μΜ and the limit of detection could reach 80.00 nM. The quenching of these CDs by Cr₂O₇^2- was efficiently induced through a static quenching process. Meanwhile, the obtained CDs could enter into HeLa cells through endocytosis and exhibit bright red fluorescence in cells under a confocal laser scanning microscope. Thus, this work provided a promising probe not only for detecting Cr(VI) in natural environment but also for imaging in cells.

Direct Optical Lithography Enabled Multispectral Colloidal Quantum-Dot Imagers from Ultraviolet to Short-Wave Infrared

Complementary metal oxide semiconductor (CMOS) silicon sensors play a central role in optoelectronics with widespread applications from small cell phone cameras to large-format imagers for remote sensing. Despite numerous advantages, their sensing ranges are limited within the visible (0.4-0.7 μm) and near-infrared (0.8-1.1 μm) range , defined by their energy gaps (1.1 eV). However, below or above that spectral range, ultraviolet (UV) and short-wave infrared (SWIR) have been demonstrated in numerous applications such as fingerprint identification, night vision, and composition analysis. In this work, we demonstrate the implementation of multispectral broad-band CMOS-compatible imagers with UV-enhanced visible pixels and SWIR pixels by layer-by-layer direct optical lithography of colloidal quantum dots (CQDs). High-resolution single-color images and merged multispectral images were obtained by using one imager. The photoresponse nonuniformity (PRNU) is below 5% with a 0% dead pixel rate and room-temperature responsivities of 0.25 A/W at 300 nm, 0.4 A/W at 750 nm, and 0.25 A/W at 2.0 μm.

Aggregation-induced fluorescence 'turn on' imaging for fingerprints by an amphiphilic probe: Synthesis and performance

Fingerprints are important biological details and play an important role in identifying personal information. To assist the identification of latent fingerprints (LFPs) which are the frequently-met cases in practical application, LFPs are usually made visible/detectable by development (imaging) techniques. In this work, an amphiphilic probe (denoted as HNP) was designed and synthesized. Its amphiphilic nature was confirmed by its single crystal structure and lipid-water partition coefficient (P = 1.38). It showed good solubility in water and bright red AIE (aggregation-induced emission) emission upon visible light excitation (∼410 nm), which satisfied the requirements for LFPs development/imaging. Photophysical parameters (absorption spectrum, emission spectrum, and emission quantum yield), LFPs imaging performance and bio-safety of probe HNP were discussed and reported. It was found that HNP showed efficient AIE effect in aggregated state. After meeting the lipids in LFPs, HNP AIE effect was activated, showing emission "turn-on" phenomenon and LFPs pattern. This mechanism was confirmed by micromorphology analysis. Corresponding dynamics were discussed as well. Good stability and durability were observed for HNP development/imaging. Details down to level 3 were successfully retrieved with high contrast.

Synthesis of N-doped carbon dots for highly selective and sensitive detection of metronidazole in real samples and its cytotoxicity studies

The current investigation reports the synthesis of N-CDs using glucosamine, ascorbic acid, and ethylenediamine precursors by a simple hydrothermal technique. The formation of N-CDs was proved by various characterisation techniques such as X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), and Fourier-Transform Infrared Spectrophotometer (FT-IR). The optical properties were investigated by fluorescence and UV-vis spectrophotometer. Also, N-CDs showed high selectivity in detecting the MTZ compared to several other analytes. However, the metronidazole serves as an antibiotic against several microbial diseases but also a genotoxic, carcinogenic to the human when used in excessive dosage. The synthesised N-CDs showed high selectivity in detecting the MTZ compared to several other analytes. Besides, the cytotoxicity of the N-CDs was studied to evaluate its toxicity against the HeLa cancer cells. It showed 65.6% cell viability and 34.3% toxicity against the cancerous cells, and similarly 71% of cells viability against H9C2 cells. Thus, the current investigation explores the promising selective sensing of N-CDs against MTZ, along with that, it proved its cytotoxicity against HeLa cancerous cells and non-toxicity against H9C2 cells. The synthesised CDs can be better MTZ sensors and anti-cancer agents on further development at the industrial scale.

Functionalized Zirconium Organic Frameworks as Fluorescent Probes for the Detection of Tetracyclines in Water and Pork

The overuse of tetracyclines (TCs) in livestock breeding may cause a series of health and environmental problems. It is necessary to develop more accurate, convenient, and rapid sensing methods toward TCs, but it is still very challenging. In this work, three isostructural zirconium organic frameworks (Zr-MOFs) have been investigated as probes for the fluorescent sensing of TCs in water. By varying the functional group at the central benzene core, their sensing performances toward TCs can be modified. Under optimized conditions, the limit of detection can be as low as 0.08 nM in a wide detection range of 0-147 μM with high sensitivity and selectivity. These Zr-MOFs can also be applied in the detection of TCs in real pork samples with satisfying reliabilities and correctness. This work provides a new method for the design and optimization of fluorescent sensors toward TCs.

Inner-filter Effect Induced Fluorescence Quenching of Carbon Dots for Cr(VI) Detection with High Sensitivity

Carbon dots (CDs) were used to develop a sensitive sensing technique for detecting Cr(VI). CDs were made using a hydrothermal technique from citric acid and glutamic acid. These prepared CDs emitted blue fluorescence under excitation of 350 nm (λ_em = 420 nm), and the fluorescence quantum yield was 48.41%. Transmission electron microscope was used to examine the morphology of the CDs, which had an average size of 2.21 ± 0.39 nm. The elementary composition and bonding structure of the CDs were conducted by XPS and FT-IR spectrum. Cr(VI) quenched the fluorescence of CDs through a static quenching effect and an inner filter effect, allowing Cr(VI) to be detected quantitatively. This approach was used to detect Cr(VI) in two samples of water, with the findings demonstrating that it is reliable and accurate. The fluorescence intensity change was linearly related to the concentration of Cr(VI) in the range from 0.5 to 400 μM, with the detection limit being 0.10 μM. This approach has the virtues of wide detection range, low cost and fast response. The strategy has a great application prospect for detecting Cr(VI) in practical samples.

Biogenic synthesis of carbon quantum dots from garlic peel bio-waste for use as a fluorescent probe for sensing of quercetin

Highly fluorescent and water-soluble carbon quantum dots (CQDs) were synthesized from the bio-waste source of garlic peels (renovation of bio-waste into bio-asset) using a controlled carbonization method. Synthesized CQDs were characterized by various analytical methods and explored as a fluorogenic probe for the recognition of quercetin (QT). UV-Vis result shows an absorption maximum at 275 nm attributed to the conjugation of C=C and C=O of CQDs and demonstrates a blue emission in the range of 330-410 nm. Selectivity was performed with various biomolecules, except for QT, all other do not exhibit any considerable change in the fluorescence of CQDs. On the interaction with QT, emission was completely quenched due to FET, confirming the high selective to QT. Effect of pH, sensitivity, and stability studies displayed excellent results under optimized conditions. The LOD fluorescent probe was found to be 6.73 μM. Our approach may suggest a new platform for the development of quick and low-cost CQDs-based sensors for environmental and biological purposes.

Preparing Colour-Tunable Tannic Acid-Based Carbon Dots by Changing the pH Value of the Reaction System

Biomass carbon dots (CDs) have the characteristics of being green, nontoxic, inexpensive, and simple to prepare, and they can be used in luminescence-related fields. In this study, red, green, and blue luminescent CDs were synthesised by a simple hydrothermal method under alkaline, neutral, and acidic conditions using TA as carbon source and o-phthalaldehyde as blend. The unique optical properties of these CDs are due to the differences in their degrees of conjugation, which can be controlled by the pH value of the reaction system. These three kinds of biomass CDs have good applications in light-emitting diodes (LEDs). By mixing biomass CDs with epoxy resin, warm, and cold white LEDs with Commission Internationale de l'Elcairage (CIE) coordinates (0.35, 0.36) were successfully constructed on extremely stable multicolour CDs. This study shows that these biomass CDs are a promising material for white LED lighting.

Ratiometric fluorescent hydrogel for point-of-care monitoring of organophosphorus pesticide degradation

The residues of organophosphorus pesticides have caused the potential risk in environment and human health, arousing worldwidely great concern. Herein, we fabricated a robust gold nanoclusters/MnO₂ composites-based hydrogel portable kit for accurate monitoring of paraoxon residues and degradation in Chinese cabbages. With the immobilization of gold nanoclusters/MnO₂ composites into a hydrogel, a ratiometric fluorescent signal is generated by catalyzing the oxidation of o-phenylenediamine, which possesses a built-in correction with low background interference. Coupling with acetylcholinesterase catalytic reactions and pesticide inhibition effect, the portable kit can sensitively detect paraoxon residues with a detection limit of 5.0 ng mL^-1. For on-site quantification, the fluorescent color variations of portable kit are converted into digital information that exhibits applicative linear range toward pesticide. Notably, the hydrogel portable kit was successfully applied for precisely monitoring the residue and degradation of paraoxon in Chinese cabbage, providing a potential pathway toward practical point-of-care testing in food safety monitoring.

Tunable multimodal printable up-/down-conversion nanomaterials for gradient information encryption

Phosphor-based security techniques have received widespread attention because they can rely on fascinating optical properties (including multicolor emission and various luminous categories) to meet information protection requirements. Carbon dots (CDs) with multicolor fluorescence (FL) and room-temperature phosphorescence (RTP) show enormous potential in advanced information encryption, yet the achievement of tunable multimodal printable CDs confronts numerous challenges. Herein, liquid CDs with color-tunable properties ranging from blue to red are obtained, and the decay time-tunable RTPs of powdered CDs are achieved with a post-treatment of urea in an o-phenylenediamine/H₂O/H₃PO₄ system. Based on various security inks, anti-counterfeiting patterns with multilevel security strength are produced through screen printing technology. Color-tunable security patterns are obtained based on different security inks containing multicolor liquid CDs. The security strength can be boosted by combining the color-tunable properties and dual-mode luminescence of FL and RTP. Furthermore, higher-level anti-counterfeiting is achieved by introducing near-infrared induced upconversion luminescence phosphors into CDs systems. The excellent security performance of gradient information encryption shows that the proposed strategy establishes superior coding capacity for advanced information encryption and provides a good reference for cutting-edge research.

Yeast powder derived carbon quantum dots for dopamine detection and living cell imaging

Dopamine (DA) is an important neurotransmitter in the brain of mammals. There is a critical need for fast and sensitive determination approaches to monitor these potential diseases due to various weaknesses in clinical trials of the existing methods for DA detection. DA can effectively quench the fluorescence of carbon quantum dots (CDs) through the inner filter effect and static quenching. In this work, fluorescent yeast CDs (Y-CDs) were prepared via a simple hydrothermal approach of using yeast powder and regarded as the fluorescent nanoprobe to directly monitor the DA concentration. The as-prepared detection platform exhibited excellent sensitivity and selectivity toward DA with a low detection limit of 30 nM and a wide linear range of 0.05-150 μM. Benefiting from these outstanding features, the developed label-free method has been successfully applied for fast DA detection in human serum samples with satisfactory recoveries. Furthermore, it demonstrated that the Y-CDs were well suitable for live cell imaging and showed low toxicity toward MCF-7 cells. Consequently, this work will facilitate the great potential of the versatile Y-CDs in developing biosensors for clinical diagnosis and other biological applications.

pH-induced highly sensitive fluorescence detection of urea and urease based on carbon dots-based nanohybrids

Carbon quantum dots (CDs) have become one of the most popular fluorescent materials due to their intriguing performance, which are favored by many fields. However, it is difficult to synthesize CDs with high quantum yield by the simple synthesis methods. In this paper, we fabricated CDs- silicon (SiO₂) spheres composites via a versatile hydrothermal route. The prepared BCD-SiO₂ composites exhibited an approximately 10-fold increase in the fluorescence intensity over that of BCDs. At the same time, the purification path was simplified by the facile separation of SiO₂ spheres. The prepared BCD-SiO₂ composites were used to fabricate a special sensing platform for the ultrasensitive detection of urea and urease, with detection limits of 1.67 μM and 0.002 mg/mL, respectively. Furthermore, this strategy was successfully applied to the detection of real samples. This result shows that as-prepared BCDs-SiO₂ composites are promising for broad application to biological analysis.

Orange emissive carbon dots for fluorescent determination of hypoxanthine in fish

Sensitive determination of hypoxanthine (HX), an indicator reflecting the degradation of meat and fish, is significantly important in monitoring food freshness. Herein, we design a novel sensor consisting of orange emissive carbon dots (O-CDs), nitrotetrazolium blue chloride (NTBC), and xanthine oxidase (XOD) for fluorescence turn-off detection of HX. O-CDs, possessing a high fluorescence quantum yield of 37%, are synthesized by hydrothermal treatment of 2,3-diaminopyridine in sulfuric acid. NTBC can react with HX/XOD-generated H₂O₂ and O₂^- to yield a violet-colored formazan, which remarkably quenches the orange fluorescence of O-CDs through inner filter effect. There is a linearity between the quenching efficiency and HX concentration in the range of 2-250 μM, and the limit of detection is 0.61 μM, lower than those of most reported HX sensors. In addition, the proposed method exhibits excellent selectivity, and can be applied to quantify HX in fish samples with satisfactory results.

Facile synthesis of multifunctional carbon dots with 54.4% orange emission for label-free detection of morin and endogenous/exogenous hypochlorite

Carbon dots with long-wavelength emission (orange to red), high quantum yield (QY) and good biocompatibility are of great significance for biomedical applications, but achieving this is still a highly challenging task. In this work, multifunctional carbon dots with 54.4% orange emission (O-CDs) were prepared through one-pot solvothermal treatment of nileblueasulphate and citric acid as precursor for label-free recognition of morin and endogenous/exogenous hypochlorite (ClO^-) and bioimaging in cellular and zebrafish. Morin can quench the luminescence of O-CDs by static quenching (SQ). The linear range is 5-125 μM and LOD is 0.84 μM. ClO^- reduce the photoluminescence intensity of O-CDs via SQ. The linear range is 2.5-90 μM and LOD was 0.46 μM. In addition, The obtained O-CDs have successfully realized the monitoring of morin and endogenous/ exogenous ClO^- in living cells and zebrafish owing to its superior biocompatibility, exceptional photostability and lower toxicity. This work opens up a novel opportunity for the development of long-wavelength emission multifunctional nanomaterial with high quantum yield based on CDs for biosensing, biolabeling and biomedical optical imaging.

One-step facile preparation of carbon dots with high fluorescence quantum yield and application in rapid latent fingerprint detection

The development of luminescent materials greatly affects the development of fluorescence imaging technology. The preparation of carbon dots (CDs) with high photoluminescence quantum yield (PLQY) in the solid-state is challenging due to excessive resonance energy transfer (RET) and direct π–π interactions. In this study, we synthesized carbon dots that exhibit green fluorescence (GCDs) with absolute PLQYs up to 35.65% in one step by a microwave-assisted method. In the solid-state, the absolute PLQY reached 19.25%. Then, the GCDs were mixed with soluble starch in appropriate proportions, which improved the adsorption and dispersion of the GCDs and greatly reduced the cost of the fingerprint powder, and increased the absolute PLQY of the fingerprint powder to 41.75%. Finally, we prepared GCDs for preliminary fabrication of luminescent films, and the GCD-starch powder was successfully applied to high-quality latent fingerprint (LFP) imaging. The related properties of GCDs and the LFP detection performance of fingerprint detection powders prepared by GCDs were studied in detail. The results showed that the LFP system developed with GCDs-starch powder visualized LFPs with high definition and contrast under different conditions, and GCDs had potential for application in light-emitting devices. This study developed a new type of solid-state luminescent CDs and demonstrated that these GCDs have great application potential for LFP detection. This study may also provide inspiration for other applications based on efficient solid-state fluorescence.

The development of luminescent materials greatly affects the development of fluorescence imaging technology.

Green preparation of carbon quantum dots with wolfberry as on-off-on nanosensors for the detection of Fe3+ and l-ascorbic acid

A green and facile hydrothermal synthesis approach is proposed for the preparation of nitrogen-doped carbon quantum dots (N-CQDs) with wolfberry. These N-CQDs were developed as a highly sensitive fluorescent 'on-off-on' switch sensor for the sensing of Fe3+ and l-ascorbic acid (AA). The N-CQDs displayed superior fluorescence characteristics of CQDs with a quantum yield up to 22%. The N-CQDs were demonstrated to selectively react with Fe3+, leading to fluorescence quenching effect, which was successfully used for the detection of Fe3+ with a limit of detection at 3 μmoL•L-1. The addition of AA is supposed to repair the surface defects, and result in the fluorescence recovery. Based on this effect, the strategy of 'on-off-on' detection of AA was established with a limit of detection at 1.8 μmoL•L-1. Furthermore, the practical application of the detection of Fe3+ lake water and AA in medical tablet was demonstrated, promising an effective and efficient 'on-off-on' nanosensor with low-cost, green synthesis for Fe3+ and AA detection.

Cation Crosslinking-Induced Stable Copper Nanoclusters Powder as Latent Fingerprints Marker

Luminescent copper nanoclusters (Cu NCs) have shown great potential in light-emitting devices (LEDs), chemical sensing, catalysis and biological fields. However, their practical use has been restricted by poor stability, and study on the stability of Cu NCs solid powder along with the mechanism is absent. In this study, stablized Cu NCs powder was first obtained by cation crosslinking method. Compared with the powder synthesized by solvent precipitation method, the stability of Cu NCs powder crosslinked by ionic inducer Ce3+ was enhanced around 100-fold. The storage time when the fluorescence intensity decreased to 85% (T85) was improved from 2 h to 216 h, which is the longest so far. The results of characterizations indicated that the aggregation structure was formed by the binding of Ce3+ with the capping ligands of Cu NCs, which helped in obtaining Ce-Cu NCs powder from aggregate precipitation in solution. Furthermore, this compact structure could avoid the destruction of ambient moisture resulting in long-lasting fluorescence and almost unchanged physical form. This demonstrated that phosphor, with excellent characteristics of unsophisticated synthesis, easy preservation and stable fluorescence, showed great potential in light sources, display technology and especially in latent fingerprints visualization on different substrates for forensic science.

Dual-Emitting Carbonized Polymer Dots Synthesized at Room Temperature for Ratiometric Fluorescence Sensing of Vitamin B12

Ratiometric fluorescence (FL) probes are highly desirable for highly sensitive and reliable assays. Dual-emitting carbonized polymer dots (CPDs) have great application prospects in building ratiometric FL sensors. However, dual-emitting CPDs are usually synthesized at high temperatures and high pressures, which not only increases the cost but also complicates the structure of CPDs. Here, we developed a facile strategy for the fabrication of dual-emitting CPDs at room temperature using tetrachlorobenzoquinone and ethylenediamine. The formation of CPDs was induced by Schiff base condensation reaction, enabling the following cross-linking polymerization process. The dual-emitting CPDs demonstrate good photostability and antioxidant capacity. Importantly, the typical dual-emission bands of the as-prepared CPDs are found to have a blue emission band at 445 nm with a maximum excitation of 350 nm and a yellow emission band at 575 nm with a maximum excitation of 440 nm. Based on the dual-emitting property of CPDs, a ratiometric FL nanoprobe is obtained for sensitive determination of vitamin B12 (VB12), as the inner filtering and static quenching effects between VB12 and CPDs allow effective quenching of the blue FL of CPDs, while the yellow FL is maintained. The established assay shows linear detection ranges of 0.25-100 μM with a low limit of detection of 0.14 μM. These findings provide new guidance for the facile preparation of CPDs with excellent dual-emitting optical properties, indicating good prospects in biosensing.

Red-emissive carbon nanodots for highly sensitive ferric(III) ion sensing and intracellular imaging

Ferric(III) ions (Fe³⁺) are one of the most abundant metal ions in environmental and biological systems. The determination of Fe³⁺ has attracted great attention for healthcare concerns. In this work, we have developed a novel fluorescence method for the sensing and intracellular imaging of Fe³⁺ based on the prepared red-emissive carbon nanodots. The nanoprobes are synthesized via a microwave method using ammonium fluoride and o-phenylenediamine as carbon precursors, which exhibit excellent optical properties and low toxicity. More importantly, the carbon nanodots show high selectivity towards Fe³⁺ against other interfering ions. The sensitivity is also high with the limit of detection as low as 0.05 μM. Meanwhile, the carbon nanodots have been successfully used for fluorescence imaging of cells and could be quenched by intracellular Fe³⁺. These results suggest that the red-emissive carbon nanodots have diverse potential utilities in biomedical fields.

Nitrogen-Doped Carbon Dot and CdTe Quantum Dot Dual-Color Multifunctional Fluorescent Sensing Platform: Sensing Behavior and Glucose and pH Detection

A novel fluorescent probe based on a nitrogen-doped carbon dot (N-CD) and CdTe quantum dot (CdTe QD) platform has been constructed for H₂O₂/glucose detection and pH sensing. In this work, H₂O₂-tolerant blue fluorescence N-CDs were added to the H₂O₂-mediated yellow fluorescence quenching of CdTe QDs to construct a dual-color ratiometric fluorescent H₂O₂ probe. H₂O₂-induced passivated group detachment and action on deep nanocrystals promoted CdTe QD fluorescence quenching. Meanwhile, the addition of the blue fluorescent background of N-CDs sharply reflected the color change in CdTe QDs. Under the optimized experimental conditions, the platform was effectively applied to the detection of H₂O₂ produced by the enzymatic reaction of glucose, showing high sensitivity (limit of detection 7.86 μM) and wide linear range (26-900 μM) for glucose detection. The pH-sensing behavior of CdTe QDs and N-CDs was attributed to the displacement of a weak acid (3-mercaptopropionic acid) by a strong acid (HCl) and the acid titration process of two coexisting bases (N-CDs and NH₃·H₂O), respectively. The loss of passivation and doping effects led to a decrease in the fluorescence intensity of CdTe QDs and N-CDs. Moreover, utilizing the ability of bimaterial system fluorescence to pH sensing, a semiquantitative pH detection based on the linear response was developed. The pH range was analyzed by three kinds of N-CD (F_ex = 440 nm) and CdTe QD (F_ex = 548 nm) typical emission spectral shapes. In addition, the recovery results showed that the bimaterial system was proved to be appropriate for the assay of glucose in spiked serum samples.

The selective deprotonation of carbon quantum dots for fluorescence detection of phosphate and visualization of latent fingerprints

We developed a water-soluble, stable and selective "turn-on" fluorescence sensing platform based on carbon quantum dots (CQDs) for rapid determination of phosphate (Pi) in aqueous solutions and for visualization of latent fingerprints on paper. The hydroxyl groups on the surface of the synthesized CQDs can be deprotonated by Pi to trigger the intramolecular charge transfer (ICT) process and the inhibition of excited-state proton transfer (ESPT), achieving a turn-on emission response. CQDs demonstrated the capability to selectively detect Pi over other common ions and biomolecules with the linear fluorescence intensity change in the range from 0 to 100 μM. Moreover, the paper sprayed with the CQD solution showed a remarkable blue emission speckle and a fingerprint upon addition of Pi solution and finger touching, respectively. Notably, the fingerprint images including level 3 details (crossover, bifurcation, termination, and island and sweat pores) are also clearly identified and distinguished, indicating their potential application in document security. We believe that the as-synthesized CQDs will provide a new tool for Pi detection in aqueous media and paper document security.

The facile preparation of solid-state fluorescent carbon dots with a high fluorescence quantum yield and their application in rapid latent fingerprint detection

Because of direct π-π interactions and excessive energy resonance transfer, it is very challenging to prepare carbon dots (CDs) with a high fluorescence quantum yield (QY) in the solid state. In this study, novel CDs which gave solid-state fluorescence (SSF) with high brightness were successfully prepared via a simple microwave-assisted method. The prepared ScCDs can emit strong blue fluorescence in the solid state, and the absolute QY of this ScCDs powder reaches 51.7%. Such a high QY means that the ScCDs powder could be successfully applied in rapid latent fingerprint (LFP) detection. The LFP detection performance of this ScCDs powder was studied in detail, and the results show that the LFPs developed using the ScCDs powder can be visualized with high definition and contrast under different conditions. This research not only developed a new type of SSF-emitting CDs, but it also proved that the developed CDs have great potential for applications in LFP detection, and this research may also provide inspiration and ideas for the design of new SSF-emitting CDs.

Magnetic perovskite nanoparticles for latent fingerprint detection

Fingerprints form when fingers touch a solid surfaceand are considered the best way for individual identification. However, the current latent fingerprint (LFP) developing methods cannot meet the demand for high sensitivity and being convenient and healthy. Herein, bifunctional Fe3O4@SiO2-CsPbBr3 powders have been designed and fabricated and exhibit good magnetic and strong fluorescent properties. The magnetism of Fe3O4 can avoid dust flying, while the fluorescence of CsPbBr3 ensures the high definition of LFPs. Clear fingerprints have been detected on various solid substrates using the Fe3O4@SiO2-CsPbBr3 powders instead of eikonogen. Detailed characterization studies suggest that the ammonium cationic groups on the surface of nanoparticles (NPs) have strong adhesive interactions with the residues of fingerprints because of the electrostatic attraction between them. Therefore, the convenient operation and excellent resolution offer great opportunity in the practical application of fingerprint detection and other areas.

Fluorescent Cationic Conjugated Polymer-Based Adaptive Developing Strategy for Both Sebaceous and Blood Fingerprints

Both latent sebaceous and blood fingerprints may provide valuable information for forensic investigation. To detect both types of fingerprints with no need to predistinguish them, a new adaptive developing strategy was proposed. A cationic conjugated polymer with poly[p-(phenylene ethylene)-alt-(thienylene ethynylene)] backbone (PPETE-NMe₃⁺) was synthesized, which was dissolved in N,N-dimethylformamide (DMF) to form the developing solution. Fingerprints were developed by a simple dropping and incubating process without any pre-/post-treatments. Fluorescent photographs of the developed fingerprints on various substrates demonstrated that this developing strategy was effective for both types of fingerprints on nonporous substrates. Gray value analysis further confirmed the enhancement of the legibility of the fingerprint images. The preliminary mechanism exploration suggested that certain weak interactions, such as hydrophobic interaction and electrostatic interaction, may synergistically contribute to the interaction between the polymer and fingerprint components. The molecular design of the polymer combined with an appropriate solvent endowed the developing system the adaptiveness toward different types of fingerprints. This adaptive developing strategy made the fingerprint-developing process more efficient and may be further extended to more practical application scenes.

Blue/yellow emissive carbon dots coupled with curcumin: a hybrid sensor toward fluorescence turn-on detection of fluoride ion

Trace detection of fluoride ion has gained increasing attention due to fluoride's close association with biological and environmental processes. Herein, we construct a novel hybrid nanosystem consisting of carbon dots and curcumin for sensitive and selective sensing of F^-. Carbon dots are synthesized by hydrothermal treatment of 2,3-diaminopyridine and selenourea in hydrochloric acid. This material is employed as the fluorescent indicator that exhibits intense blue and yellow emission with quantum yields of 12% and 33%, respectively. Curcumin, possessing an absorption peak at 532 nm, can significantly quench the yellow fluorescence of carbon dots through inner filter effect. Curcumin is also used to specifically recognize F^-. When F^- is added, the curcumin-F^- complex generates, which leads to the hypochromatic shift of the absorption band from 532 to 430 nm. In such a case, the inner filter effect reduces, and yellow fluorescence of carbon dots recovers. Thus, a fluorescence turn-on sensor of F^- is built based on the carbon dots/curcumin system. The limits of detection and quantitation are measured to be 0.39 and 1.30 μM, respectively. For real usage, the proposed method is applied to determinate F^- in tap water and milk samples with relative standard deviations below 7.9%.