Carboxylated Fullerene at the Oil/Water Interface

Probing the Mechanism of Targeted Delivery of Molecular Surfactants Loaded into Nanoparticles after Their Assembly at Oil-Water Interfaces

A targeted and controlled delivery of molecular surfactants at oil-water interfaces using the directed assembly of nanoparticles, NPs, is reported. The mechanism of NP assembly at the interface and the release of molecular surfactants is followed by laser scanning confocal microscopy and surface force spectroscopy. The assembly of positively charged polystyrene NPs at the oil-water interface was facilitated by the introduction of carboxylic acid groups in the oil phase (e.g., by adding 1 wt % stearic acid to hexadecane to produce a model oil). The presence of positively charged NPs consistently lowers the stiffness of the water-oil interface. The effect is lessened, when the NPs are present in a solution of NaCl or deionized water at pH 2, consistent with a less dense monolayer of NPs at the interface in the last two systems. In addition, the NPs reduce the interfacial adhesion (i.e., the "stickiness" of the interface or, put differently, the pull-off force experienced by the atomic force microscopy (AFM) tip during retraction). After the assembly, the NPs can release a previously loaded cargo of surfactant molecules, which then facilitate the formation of a much finer oil-water emulsion. As a proof of concept, we demonstrate the release of octadecyl amine, ODA, that has been incorporated into the NPs prior to the assembly. The release of ODA causes the NPs to detach from the interface altering the interfacial properties and leads to finer oil droplets. This approach can be exploited in applications in several fields ranging from pharmaceutical and cosmetics to hydrocarbon recovery and oil-spill remediation, where a targeted and controlled release of surfactants is wanted.

The interfacial and assembly properties of in situ producing silica nanoparticle at oil-water interface

In multiphase materials, structured fluid-fluid interfaces can provide mechanical resistance against destabilization, applicable for conformance control, Pickering emulsion, liquid 3D printing and molding, etc. Currently all research prepare the particle-ladened fluid-fluid interfaces by dispersing ex situ acquired particles to the immiscible interface, which limits their application in the harsh environment, such as oil reservoir which can impair particle stability and transport ability. Here, we investigated the interfacial and assembly properties of the interface where SiO2 nanoparticles (NPs) were in situ produced. The experimental results show that ammonia as catalyst could accelerate the processes of silica NPs formation as well as the interfacial tension (IFT) evolution. High temperature could not accelerate the reaction processes to achieve the lowest equilibrium IFT, but it induced the sine-wave IFT evolution curves regardless of the presence of ammonia. The equilibrium IFTs corresponded to the saturation states of interfaces trapping with SiO2 NPs, while the sine-wave fluctuating patterns of IFT were attributed to the alternating transition between interfacial jammed and unjammed states changing along with the reaction process. Silica NPs diffusing into aqueous phase with high salinity also showed good stability, due to the abundant surface decoration with in situ anchored organic species.

In Situ Produced Nanoparticles at the Oil-Water Interface for Conformance Control and Enhanced Oil Recovery

Nanoparticle-assisted enhanced oil recovery (Nano-EOR) has attracted intensive interest in the laboratory as a promising oil recovery technology. However, the nanoparticles' stability and long-distance delivery of nanoparticles (NPs) in large-scale reservoirs are two main challenges. In this work, we developed a novel concept of in situ synthesizing NPs at the oil-water interface inside the reservoir for EOR instead of injecting presynthesized NPs from outside. The pore-scale flooding experiments show that EOR efficiencies for tertiary flooding were 6.3% without reaction (Case 3), 14.6% for slow reaction (Case 1), and 25.4% for relatively quick reaction (Case 4). Examination of the EOR mechanism shows that in situ produced SiO₂ NPs in microchannels could alter the substrate wettability toward neutral wetting. Moreover, the produced NPs tended to assemble on the immiscible oil-water interface, forming a barrier toward interface deformation. As the reaction continued, excessive surface-modified NPs could also diffuse into aqueous brine and accumulate as a soft gel in the flowing path swept by brine. Collectively, these processes induced a "shut-off" effect and diverted displacing fluids to unswept areas, which consequently increased the sweep efficiency and improved the oil recovery efficiency. Auxiliary bulk-scale experiments also showed that the reaction-induced nanoparticle synthesis and assembly at an immiscible interface reduced the interfacial tension and generated an elastic oil-water interface.

Supramolecular Interfaces and Reconfigurable Liquids Derived from Cucurbit[7]uril Surfactants

Nanoparticle surfactants (NPSs) offer a powerful means to stabilize the oil-water interface and construct all-liquid devices with advanced functions. However, as the nanoparticle size decreases to molecular-scale, the binding energy of the NPS to the interface reduces significantly, leading to a dynamic adsorption of NPS and "liquid-like" state of the interfacial assemblies. Here, by using the host-guest recognition between a water-soluble small molecule, cucurbit[7]uril (CB[7]) and an oil-soluble polymer ligand, methyl viologen-terminated polystyrene, a supramolecular NPS model, termed CB[7] surfactant, is described. CB[7] surfactants form and assemble rapidly at the oil-water interface, generating an elastic film with excellent mechanical properties. The binding energy of CB[7] surfactant to the interface is sufficiently high to hold it in a jammed state, transforming the interfacial assemblies from a "liquid-like" to "solid-like" state, enabling the structuring of liquids. With CB[7] surfactants as the emulsifier, O/W, W/O and O/W/O emulsions can be prepared in one step. Owing to the guest-competitive responsiveness of CB[7] surfactants, the assembly/disassembly and jamming/unjamming of CB[7] surfactants can be well controlled, leading to the reconfiguration of all-liquid constructs.

Self-Assembly of Polystyrene-b-poly(2-vinylpyridine)/Chloroauric Acid at the Liquid/Liquid Interface

The self-assembly of polystyrene-block-poly(2-vinylpyridine) at the liquid/liquid interface has been systematically investigated to develop a series of primary morphologies of the aggregates. The block copolymers self-assembled into large areas of nanodot arrays, parallel nanostrands, layered films, parallel nanobelts, honeycomb monolayers, and foams by reacting with chloroauric acid, depending on the molecular structure of the block copolymers and the amount of chloroauric acid. The formation of the first four ordered structures resulted from interfacial adsorption and self-assembly, and nucleation and epitaxial growth. The latter two structures were attributed to the water hole templating effect and spontaneous interfacial emulsification, respectively. This work provides insight into the self-assembly behavior of block copolymers at the interface and provides a facile approach for fabricating functional structures.

Tuning the Stability of Liquids by Controlling the Formation of Interfacial Surfactants

Currently, the stability of liquids by nanoparticle surfactants is widely investigated, while the stability of liquids by supramolecular polymer surfactants is rarely involved. Herein, we combine small organic molecules dissolved...

Buckling Effect of Sole Zeolitic Imidazolate Framework-8 Nanoparticles Adsorbed at the Water/Oil Interface

The buckling phenomenon of sole zeolitic imidazolate framework-8 (ZIF-8) particles adsorbed at the water/oil interface was systematically studied. The droplet of ZIF-8 water dispersion was pended in oil for a certain time period and manually extracted to decrease the volume. With the reduction of interfacial area, the ZIF-8 particles were jammed together to form a wrinkling solid film at the water/oil interface, which could withstand the extraction of the droplet and be regenerated. The size and concentration of the particles affected the assembly kinetics. The rapidest assembly was observed for the medium-sized ZIF-8 particles (m-ZIF-8) among the three sizes tested (1.81 μm, 258 nm, and 51 nm). The droplet of 0.91 wt % m-ZIF-8 reached a nearly full surface coverage in 13 min, faster than those with the lower concentration of 0.46 or 0.28 wt %. The pH of the solution, ranging between 6 and 10.7, affected both the assembly kinetics and film stability. Cryo-scanning electron microscopy images of frozen m-ZIF-8-stabilized Picking emulsions showed a monolayer of ZIF-8 wetted by both oil and water phases. The observed buckling effect could be attributed to the stable adsorption of ZIF-8 at the water/oil interface and the interparticle interactions, related to the unique surface chemistry and polyhedral shape of the ZIF-8 crystals. This work provided some understanding on the interfacial property of ZIF-8 and the mechanism of sole ZIF-8-stabilized Pickering emulsions.

Surfactant-Augmented Functional Silica Nanoparticle Based Nanofluid for Enhanced Oil Recovery at High Temperature and Salinity

Nanofluids in recent years have shown great potential as a chemical enhanced oil recovery (EOR) technology, thanks to their excellent performance in altering interfacial properties. However, because of the great challenge in preparing stable systems suitable for an elevated temperature and a high salinity environment, expanding the application of nanofluids has been greatly restrained. In this work, a novel nanofluid was prepared by integrating positively charged amino-terminated silica nanoparticles (SiNP-NH₂) with negatively charged anionic surfactant (Soloterra 964) via electrostatic force. The resulted nanofluid could be stored at relatively high salinity (15 wt % NaCl solution) and high temperature (65 °C) for more than 30 days without aggregation. Successful coating of the surfactant on target SiNPs was verified by Fourier transform infrared spectrometry and the surface charge and size distribution. In addition, the potential of the nanofluid in recovering oil was investigated by analyzing the nanofluid/Bakken oil interfacial tension and the variation trend of the oil contact angle when brine was replaced by nanofluids. Experimental results showed that the water-oil interfacial tension of the Bakken crude oil decreased by 99.85% and the contact angle increased by 237.8% compared to the original value of 13.78 mN/m and 43.4°, respectively, indicating strong oil displacement efficiency and obvious wetting transition from oil-wet toward water-wet. Spontaneous imbibition tests conducted on Berea rocks showed that the nanofluid yielded a high oil recovery rate of 46.61%, compared to that of 11.30, 16.58, and 22.89% for brine, pure SiNP-NH₂, and pure surfactant (Soloterra 964), respectively. In addition, when core flooding was applied, a total of 60.88% of the original oil in place could be recovered and an additional oil recovery of 17.23% was achieved in the chemical flooding stage. Moreover, a possible mechanism of the EOR using the nanofluid was proposed. Overall, the developed nanofluid is a promising new material for EOR.

Salt-Triggered Release of Hydrophobic Agents from Polyelectrolyte Capsules Generated via One-Step Interfacial Multilevel and Multicomponent Assembly

Controlled release of hydrophobic agents from salt-responsive capsules is hindered by the hydrophilic shell and interfacial tension between inner oil and surrounding water. Rupturing shells in salt solution is another effective way. However, the densely entangled polyelectrolytes (PEs) in shells determined that the rupture requires extremely high ion-strength. Herein, salt-responsive capsules with double-network shells including a continuous PE-nanocrystal network and interfacial ion pairs are proposed and revealed via a one-step interfacial multilevel and multicomponent assembly (IMMA) method. Rigid nanocrystals can weaken the entanglements of PE chains and reduce the critical salt-concentration. Interfacial ion pairs are responsible for maintaining the stability of the shells. Such double networks enable the disintegration of capsules in an applicable salt-concentration without damaging the stability of capsules. In addition, hydrophobic domains assemblied by surfactants and PE-nanocrystal network supply transport pathway for oil to across hydrophilic shells and subsequently produce inverse micelle to carry oil into water. The mechanism of formation and release of capsules is systematically investigated, which further demonstrates IMMA to be a typical method for creation of sophisticated structures in a brief way.

Modification-Free Fabricating Ratiometric Nanoprobe Based on Dual-Emissive Carbon Dots for Nitrite Determination in Food Samples

Great challenges still exist for facilely fabricating ratiometric fluorescent nanoprobes. Fortunately, the appearance of dual-emissive carbon dots (CDs) offers a glimmer of hope for the fabrication of modification-free ratiometric nanoprobe. The chemical and electronic structure characteristics of the dual-emissive CDs might be modulated by conjugated structures of carbon sources and the doped nitrogen and sulfur atoms, and the surface state also contributed to the fluorescence properties via surface functional groups. Herein, we report a one-pot strategy for simultaneous preparation of two kinds of CDs named RYDE CDs and RODE CDs, showing dual-emissive fluorescent peaks with long wavelength by 2,3-diaminobenzoic acid hydrochloride for the first time. Notably, trace nitrite determination with high sensitivity and selectivity was realized for the first time based on the modification-free ratiometric fluorescent nanoprobe fabricated rapidly and directly by the as-prepared RYDE CDs at constant room temperature (20 °C). Under the optimal conditions, the limit of detection for nitrite was 31.61 nM, with a wide concentration linear range of 0.1-100 μM. Furthermore, this ratiometric nanoprobe was successfully applied for nitrite analysis in bacon, sausage, pickle, and milk samples. Additionally, the nanoprobe was also capable of visually monitoring temperature fluctuations and cell imaging.

Nanoparticle Assembly at Liquid-Liquid Interfaces: From the Nanoscale to Mesoscale

In the past few decades, novel syntheses of a wide range of nanoparticles (NPs) with well-defined chemical composition and structure have opened tremendous opportunities in areas ranging from optical and electronic devices to biomedical markers. Controlling the assembly of such well-defined NPs is important to effectively harness their unique properties. The assembly of NPs at liquid-liquid interfaces is becoming a central topic both in surface and colloid science. Hierarchical structures, including 2D films, 3D capsules, and structured liquids, have been generating significant interest and are showing promise for physical, chemical, and biological applications. Here, a brief overview of the development of the self-assembly of NPs at liquid-liquid interfaces is provided, from theory to experiment, from synthetic NPs to bio-nanoparticles, from water-oil to water-water, and from "liquid-like" to "solid-like" assemblies.