1
|
Duisenbek A, Beisenova Y, Beissenov R, Askaruly K, Yeleuov M, Abdisattar A. Onion husk-derived high surface area graphene-like carbon for supercapacitor electrode material application. Heliyon 2024; 10:e32915. [PMID: 38994073 PMCID: PMC11237968 DOI: 10.1016/j.heliyon.2024.e32915] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/17/2023] [Revised: 06/03/2024] [Accepted: 06/12/2024] [Indexed: 07/13/2024] Open
Abstract
In this study, we report the synthesis of graphene-like carbon derived from onion husk, with potential application as an electrode material in energy storage devices. Graphene-like carbon (GLC) was synthesized from onion husk (OH) by preliminary carbonization at 550 °C, followed by thermochemical activation at various temperatures to determine the optimal activation parameters. The surface morphology of graphene-like carbon from onion husk (GLC-OH) samples after carbonization shows distinct thermal exfoliation of the material. This layering upon activation in KOH promotes the formation of highly porous graphene-like carbon flakes. According to the Brunauer-Emmett-Teller (BET) method, the specific surface area at 850 °C was 1924 m2/g. The X-ray diffraction (XRD) and Raman spectroscopy results reveal the emergence of few-layer graphene with a significant amount of structural defects at 850 °C. As the temperature increases, the formation shifts towards multilayer graphene, which leads to a decrease in the specific surface area of the carbon material. The electrochemical characterization of the assembled GLC-OH-based supercapacitor synthesized at 850 °C revealed a markedly higher specific capacitance value of 131 F/g, along with a Coulombic efficiency of 98 % at a gravimetric current density of 1 A/g. Additionally, it exhibited a low charge transfer resistance (RCT) of approximately 1.4 Ω. Our study investigates the influence of structural changes on the electrochemical performance of biomass-derived activated carbon, highlighting the potential of graphene-like carbon from onion husk as a promising and low-cost material for future energy storage devices.
Collapse
Affiliation(s)
- Asel Duisenbek
- Satbayev University, Almaty, Kazakhstan
- Institute of Combustion Problems, Almaty, Kazakhstan
| | | | - Renat Beissenov
- Institute of Combustion Problems, Almaty, Kazakhstan
- Kazakh-British Technical University, Almaty, Kazakhstan
| | - Kydyr Askaruly
- Satbayev University, Almaty, Kazakhstan
- Institute of Combustion Problems, Almaty, Kazakhstan
| | - Mukhtar Yeleuov
- Satbayev University, Almaty, Kazakhstan
- Institute of Combustion Problems, Almaty, Kazakhstan
| | - Alisher Abdisattar
- Satbayev University, Almaty, Kazakhstan
- Institute of Combustion Problems, Almaty, Kazakhstan
| |
Collapse
|
2
|
Jha S, Sarkhel S, Saha S, Sahoo B, Kumari A, Chatterjee K, Mazumder PM, Sarkhel G, Mohan A, Roy A. Expanded porous-starch matrix as an alternative to porous starch granule: Present status, challenges, and future prospects. Food Res Int 2024; 175:113771. [PMID: 38129003 DOI: 10.1016/j.foodres.2023.113771] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2023] [Revised: 11/10/2023] [Accepted: 11/22/2023] [Indexed: 12/23/2023]
Abstract
Exposing the hydrated-soft-starch matrix of intact grain or reconstituted flour dough to a high-temperature-short-time (HTST) leads to rapid vapor generation that facilitates high-pressure build-up in its elastic matrix linked to large deformation and expansion. The expanded starch matrix at high temperatures dries up quickly by flash vaporization of water, which causes loss of its structural flexibility and imparts a porous and rigid structure of the expanded porous starch matrix (EPSM). EPSM, with abundant pores in its construction, offers adsorptive effectiveness, solubility, swelling ability, mechanical strength, and thermal stability. It can be a sustainable and easy-to-construct alternative to porous starch (PS) in food and pharmaceutical applications. This review is a comparative study of PS and EPSM on their preparation methods, structure, and physicochemical properties, finding compatibility and addressing challenges in recommending EPSM as an alternative to PS in adsorbing, dispersing, stabilizing, and delivering active ingredients in a controlled and efficient way.
Collapse
Affiliation(s)
- Shipra Jha
- Laboratory of Applied Food Chemistry, Microbiology and Process Engineering, Centre for Food Engineering and Technology, Department of Chemical Engineering, Birla Institute of Technology - Mesra, Ranchi 835215, India
| | - Shubhajit Sarkhel
- Laboratory of Applied Food Chemistry, Microbiology and Process Engineering, Centre for Food Engineering and Technology, Department of Chemical Engineering, Birla Institute of Technology - Mesra, Ranchi 835215, India
| | - Sreyajit Saha
- Laboratory of Applied Food Chemistry, Microbiology and Process Engineering, Centre for Food Engineering and Technology, Department of Chemical Engineering, Birla Institute of Technology - Mesra, Ranchi 835215, India
| | - Bijendra Sahoo
- Laboratory of Applied Food Chemistry, Microbiology and Process Engineering, Centre for Food Engineering and Technology, Department of Chemical Engineering, Birla Institute of Technology - Mesra, Ranchi 835215, India
| | - Ankanksha Kumari
- Laboratory of Applied Food Chemistry, Microbiology and Process Engineering, Centre for Food Engineering and Technology, Department of Chemical Engineering, Birla Institute of Technology - Mesra, Ranchi 835215, India
| | - Kaberi Chatterjee
- Department of Pharmaceutical Sciences and Technology, Birla Institute of Technology - Mesra, Ranchi 835215, India
| | - Papiya Mitra Mazumder
- Department of Pharmaceutical Sciences and Technology, Birla Institute of Technology - Mesra, Ranchi 835215, India
| | - Gautam Sarkhel
- Laboratory of Applied Food Chemistry, Microbiology and Process Engineering, Centre for Food Engineering and Technology, Department of Chemical Engineering, Birla Institute of Technology - Mesra, Ranchi 835215, India
| | - Anand Mohan
- Department of Food Science & Technology, University of Georgia, Athens, GA 30602, USA
| | - Anupam Roy
- Laboratory of Applied Food Chemistry, Microbiology and Process Engineering, Centre for Food Engineering and Technology, Department of Chemical Engineering, Birla Institute of Technology - Mesra, Ranchi 835215, India.
| |
Collapse
|
3
|
Zhai M, Ye J, Jiang Y, Yuan S, Li Y, Liu Y, Dai L, Wang L, He Z. Biomass-derived carbon materials for vanadium redox flow battery: From structure to property. J Colloid Interface Sci 2023; 651:902-918. [PMID: 37573736 DOI: 10.1016/j.jcis.2023.08.041] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2023] [Revised: 07/28/2023] [Accepted: 08/06/2023] [Indexed: 08/15/2023]
Abstract
Biomass-derived carbon (BDC) materials are suitable as electrode or catalyst materials for vanadium redox flow battery (VRFB), owing to the characteristics of vast material sources, environmental friendliness, and multifarious structures. A timely and comprehensive review of the structure and property significantly facilitates the development of BDC materials. Here, the paper starts with the preparation of biomass materials, including carbonization and activation. It is designed to summarize the lastest developments in BDC materials of VRFB in four different structural dimensions from zero dimension (0D) to three dimension (3D). Every dimension begins with meticulously selected examples to introduce the structural characteristics of materials and then illustrates the improved performance of the VRFB due to the structure. Simultaneously, challenges, solutions, and prospects are indicated for the further development of BDC materials. Overall, this review will help researchers select excellent strategies for the fabrication of BDC materials, thereby facilitating the use of BDC materials in VRFB design.
Collapse
Affiliation(s)
- Meixiang Zhai
- School of Chemical Engineering, North China University of Science and Technology, Tangshan 063009, Hebei, China
| | - Jiejun Ye
- School of Chemical Engineering, North China University of Science and Technology, Tangshan 063009, Hebei, China
| | - Yingqiao Jiang
- School of Chemical Engineering, North China University of Science and Technology, Tangshan 063009, Hebei, China
| | - Sujuan Yuan
- School of Chemical Engineering, North China University of Science and Technology, Tangshan 063009, Hebei, China.
| | - Yuehua Li
- School of Chemical Engineering, North China University of Science and Technology, Tangshan 063009, Hebei, China
| | - Yongguang Liu
- School of Chemical Engineering, North China University of Science and Technology, Tangshan 063009, Hebei, China
| | - Lei Dai
- School of Chemical Engineering, North China University of Science and Technology, Tangshan 063009, Hebei, China; Hebei Province Key Laboratory of Photocatalytic and Electrocatalytic Materials for Environment, North China University of Science and Technology, Tangshan 063009, Hebei, China
| | - Ling Wang
- School of Chemical Engineering, North China University of Science and Technology, Tangshan 063009, Hebei, China; Hebei Province Key Laboratory of Photocatalytic and Electrocatalytic Materials for Environment, North China University of Science and Technology, Tangshan 063009, Hebei, China.
| | - Zhangxing He
- School of Chemical Engineering, North China University of Science and Technology, Tangshan 063009, Hebei, China; Hebei Province Key Laboratory of Photocatalytic and Electrocatalytic Materials for Environment, North China University of Science and Technology, Tangshan 063009, Hebei, China.
| |
Collapse
|
4
|
Liu J, He X, Cai J, Zhou J, Liu B, Zhang S, Sun Z, Su P, Qu D, Li Y. 3D Porous VO x/N-Doped Carbon Nanosheet Hybrids Derived from Cross-Linked Dicyandiamide-Chitosan Hydrogels for Superior Supercapacitor Electrode Materials. Polymers (Basel) 2023; 15:3565. [PMID: 37688191 PMCID: PMC10490277 DOI: 10.3390/polym15173565] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/28/2023] [Revised: 08/20/2023] [Accepted: 08/26/2023] [Indexed: 09/10/2023] Open
Abstract
Three-dimensional porous carbon materials with moderate heteroatom-doping have been extensively investigated as promising electrode materials for energy storage. In this study, we fabricated a 3D cross-linked chitosan-dicyandiamide-VOSO4 hydrogel using a polymerization process. After pyrolysis at high temperature, 3D porous VOx/N-doped carbon nanosheet hybrids (3D VNCN) were obtained. The unique 3D porous skeleton, abundant doping elements, and presence of VOx 3D VNCN pyrolyzed at 800 °C (3D VNCN-800) ensured excellent electrochemical performance. The 3D VNCN-800 electrode exhibits a maximum specific capacitance of 408.1 F·g-1 at 1 A·g-1 current density and an admirable cycling stability with 96.8% capacitance retention after 5000 cycles. Moreover, an assembled symmetrical supercapacitor based on the 3D VNCN-800 electrode delivers a maximum energy density of 15.6 Wh·Kg-1 at a power density of 600 W·Kg-1. Our study demonstrates a potential guideline for the fabrication of porous carbon materials with 3D structure and abundant heteroatom-doping.
Collapse
Affiliation(s)
- Jinghua Liu
- Liuzhou Key Laboratory of New Energy Vehicle Power Lithium Battery, Guangxi Engineering Research Center for Characteristic Metallic Powder Materials, School of Electronic Engineering, Guangxi University of Science and Technology, Liuzhou 545000, China; (J.L.); (J.Z.); (B.L.); (S.Z.); (Z.S.)
| | - Xiong He
- Liuzhou Key Laboratory of New Energy Vehicle Power Lithium Battery, Guangxi Engineering Research Center for Characteristic Metallic Powder Materials, School of Electronic Engineering, Guangxi University of Science and Technology, Liuzhou 545000, China; (J.L.); (J.Z.); (B.L.); (S.Z.); (Z.S.)
| | - Jiayang Cai
- Guangxi Key Laboratory of Green Processing of Sugar Resources, College of Biological and Chemical Engineering, Guangxi University of Science and Technology, Liuzhou 545006, China; (J.C.); (P.S.)
| | - Jie Zhou
- Liuzhou Key Laboratory of New Energy Vehicle Power Lithium Battery, Guangxi Engineering Research Center for Characteristic Metallic Powder Materials, School of Electronic Engineering, Guangxi University of Science and Technology, Liuzhou 545000, China; (J.L.); (J.Z.); (B.L.); (S.Z.); (Z.S.)
| | - Baosheng Liu
- Liuzhou Key Laboratory of New Energy Vehicle Power Lithium Battery, Guangxi Engineering Research Center for Characteristic Metallic Powder Materials, School of Electronic Engineering, Guangxi University of Science and Technology, Liuzhou 545000, China; (J.L.); (J.Z.); (B.L.); (S.Z.); (Z.S.)
| | - Shaohui Zhang
- Liuzhou Key Laboratory of New Energy Vehicle Power Lithium Battery, Guangxi Engineering Research Center for Characteristic Metallic Powder Materials, School of Electronic Engineering, Guangxi University of Science and Technology, Liuzhou 545000, China; (J.L.); (J.Z.); (B.L.); (S.Z.); (Z.S.)
| | - Zijun Sun
- Liuzhou Key Laboratory of New Energy Vehicle Power Lithium Battery, Guangxi Engineering Research Center for Characteristic Metallic Powder Materials, School of Electronic Engineering, Guangxi University of Science and Technology, Liuzhou 545000, China; (J.L.); (J.Z.); (B.L.); (S.Z.); (Z.S.)
| | - Pingping Su
- Guangxi Key Laboratory of Green Processing of Sugar Resources, College of Biological and Chemical Engineering, Guangxi University of Science and Technology, Liuzhou 545006, China; (J.C.); (P.S.)
| | - Dezhi Qu
- Guangxi Key Laboratory of Green Processing of Sugar Resources, College of Biological and Chemical Engineering, Guangxi University of Science and Technology, Liuzhou 545006, China; (J.C.); (P.S.)
| | - Yudong Li
- Key Laboratory of Bio-Based Material Science & Technology, Northeast Forestry University, Harbin 150090, China;
| |
Collapse
|
5
|
Constructing monodisperse blueberry-like lignin-based porous carbon nanospheres for high-performance supercapacitors. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.130237] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
6
|
Fei F, Zhou H, Gu C, Kang M. Pokeweed leaves derived materials for high-energy-density asymmetric supercapacitor. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.130061] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
7
|
Lu Z, Wang Y, Zhu Y, Hasebe Y, Zhang Z. Popcorn‐Derived Porous Carbon Based Electrochemical Sensor for Simultaneous Determination of Hydroquinone, Catechol and Nitrite. ChemistrySelect 2022. [DOI: 10.1002/slct.202200148] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Zhenyong Lu
- School of Chemical Engineering University of Science and Technology Liaoning 185 Qianshan Middle Road, High-tech Zone Anshan Liaoning 114051 China
| | - Yue Wang
- School of Chemical Engineering University of Science and Technology Liaoning 185 Qianshan Middle Road, High-tech Zone Anshan Liaoning 114051 China
| | - Yaming Zhu
- School of Chemical Engineering University of Science and Technology Liaoning 185 Qianshan Middle Road, High-tech Zone Anshan Liaoning 114051 China
| | - Yasushi Hasebe
- Department of Life Science and Green Chemistry Faculty of Engineering Saitama Institute of Technology 1690 Fusaiji Fukaya Saitama 369-0293 Japan
| | - Zhiqiang Zhang
- School of Chemical Engineering University of Science and Technology Liaoning 185 Qianshan Middle Road, High-tech Zone Anshan Liaoning 114051 China
| |
Collapse
|
8
|
Al-Enizi AM. Waste cigarette butt-derived B, N doped bifunctional hierarchical mesoporous carbon for supercapacitor and oxygen reduction reaction. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.128775] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
9
|
Yan J, Miao L, Duan H, Zhu D, Lv Y, Li L, Gan L, Liu M. High-energy aqueous supercapacitors enabled by N/O codoped carbon nanosheets and “water-in-salt” electrolyte. CHINESE CHEM LETT 2022. [DOI: 10.1016/j.cclet.2021.08.123] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
10
|
Zhang Y, Wu C, Dai S, Liu L, Zhang H, Shen W, Sun W, Ming Li C. Rationally tuning ratio of micro- to meso-pores of biomass-derived ultrathin carbon sheets toward supercapacitors with high energy and high power density. J Colloid Interface Sci 2022; 606:817-825. [PMID: 34425269 DOI: 10.1016/j.jcis.2021.08.042] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/11/2021] [Revised: 08/06/2021] [Accepted: 08/07/2021] [Indexed: 12/20/2022]
Abstract
The carbon pore structure could have a significant effect on supercapacitor performance; however, this effect has not yet been systematically studied. A facile approach for synthesizing porous, ultrathin carbon sheets while rationally tuning the ratio of micro-to meso-pores via partial corrosion has been developed for the fabrication of high-performance devices. The prepared carbon from biomass with an optimal ratio of micro- to meso-pores has a large specific surface area of 1785 m2 g -1, a high specific capacitance of 447F g -1 at 0.5 A g-1, a high energy density of 15.5-9.7 Wh kg-1, and an excellent power density of 0.062-6.24 kW kg-1. After 10,000 charge-discharge cycles, the capacitance retention was maintained at 95%, which exceeded most of the biomass-carbon-based capacitors. Volcano relationships were found to exist through plots of both specific surface area and specific capacitance versus the micro-to meso-pore ratio. An enhancement mechanism with a rational pore structure is proposed, which not only networks micropores to remove died-end micropores to achieve the largest specific active surface area and high specific capacitance but also realizes fast mass-transport channels, resulting in high power density. This work provides an effective approach based on waste re-use by tuning a rational pore structure for achieving high energy/power density toward green energy applications with universal significance.
Collapse
Affiliation(s)
- Yuhe Zhang
- Institute for Clean Energy & Advanced Materials, School of Materials and Energy, Southwest University, Chongqing 400715, PR China; Chongqing Key Laboratory for Advanced Materials and Technologies of Clean Energies, Chongqing 400715, PR China
| | - Chao Wu
- Institute for Clean Energy & Advanced Materials, School of Materials and Energy, Southwest University, Chongqing 400715, PR China; Chongqing Key Laboratory for Advanced Materials and Technologies of Clean Energies, Chongqing 400715, PR China
| | - Shuai Dai
- Institute for Clean Energy & Advanced Materials, School of Materials and Energy, Southwest University, Chongqing 400715, PR China; Chongqing Key Laboratory for Advanced Materials and Technologies of Clean Energies, Chongqing 400715, PR China
| | - Lifei Liu
- Institute for Clean Energy & Advanced Materials, School of Materials and Energy, Southwest University, Chongqing 400715, PR China; Chongqing Key Laboratory for Advanced Materials and Technologies of Clean Energies, Chongqing 400715, PR China
| | - Heng Zhang
- Institute for Clean Energy & Advanced Materials, School of Materials and Energy, Southwest University, Chongqing 400715, PR China; Chongqing Key Laboratory for Advanced Materials and Technologies of Clean Energies, Chongqing 400715, PR China
| | - Wei Shen
- Institute for Materials Science & Devices, School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, PR China
| | - Wei Sun
- Key Lab of Laser Technology and Optoelectronic Functional Materials of Hainan Province, Key Lab of Functional Materials and Photoelectrochemistry of Haikou, College of Chemistry and Chemical Engineering, Hainan Normal University, Haikou 571158, PR China
| | - Chang Ming Li
- Institute for Clean Energy & Advanced Materials, School of Materials and Energy, Southwest University, Chongqing 400715, PR China; Chongqing Key Laboratory for Advanced Materials and Technologies of Clean Energies, Chongqing 400715, PR China; Institute for Materials Science & Devices, School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, PR China; Institute for Advanced Cross-field Science & College of Life Science, Qingdao University, Qingdao 200671, PR China.
| |
Collapse
|
11
|
Hou J, Fang L, Wang X, Gao H, Wang G. Spatially confined magnesiothermic reduction induced uniform mesoporous hollow silicon carbide nanospheres for high-performance supercapacitors. Chem Commun (Camb) 2022; 58:12455-12458. [DOI: 10.1039/d2cc04723c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Well-dispersed mesoporous hollow SiC nanospheres (∼95 nm in diameter) were fabricated via in situ magnesiothermic reduction. The unique construction enables a high-rate capacitance (τ0 of only 0.34 s) and long cycle stability for supercapacitors.
Collapse
Affiliation(s)
- Jianhua Hou
- School of Environmental Science and Engineering, Yangzhou University, Yangzhou 225000, P. R. China
| | - Liang Fang
- School of Environmental Science and Engineering, Yangzhou University, Yangzhou 225000, P. R. China
| | - Xiaozhi Wang
- School of Environmental Science and Engineering, Yangzhou University, Yangzhou 225000, P. R. China
| | - Hong Gao
- Centre for Clean Energy Technology, School of Mathematical and Physical Sciences, Faculty of Science, University of Technology Sydney, City Campus, Broadway, NSW 2007, Australia
| | - Guoxiu Wang
- Centre for Clean Energy Technology, School of Mathematical and Physical Sciences, Faculty of Science, University of Technology Sydney, City Campus, Broadway, NSW 2007, Australia
| |
Collapse
|
12
|
Zhou Y, Xu S, Yang J, Zhou Z, Peng S, Wang X, Yao T, Zhu Y, Xu B, Zhang X. A thin carbon nanofiber/branched carbon nanofiber nanocomposite for high-performance supercapacitors. NEW J CHEM 2022. [DOI: 10.1039/d1nj06171b] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A symmetric device based on TCNF/CNF delivers a specific energy of 6.8 W h kg−1 at the specific power of 18.45 kW kg−1.
Collapse
Affiliation(s)
- Yongsheng Zhou
- State Key Laboratory of Advanced Technology for Float Glass, Bengbu, 233018, P. R. China
- College of Chemistry and Materials Engineering, Anhui Science and Technology University, Bengbu, 233030, P. R. China
- Key Laboratory of Inorganic Coating Materials CAS, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, P. R. China
| | - Shibiao Xu
- College of Chemistry and Materials Engineering, Anhui Science and Technology University, Bengbu, 233030, P. R. China
| | - Jiaojiao Yang
- College of Chemistry and Materials Engineering, Anhui Science and Technology University, Bengbu, 233030, P. R. China
| | - Ziyu Zhou
- College of Chemistry and Materials Engineering, Anhui Science and Technology University, Bengbu, 233030, P. R. China
| | - Shou Peng
- State Key Laboratory of Advanced Technology for Float Glass, Bengbu, 233018, P. R. China
| | - Xuchun Wang
- College of Chemistry and Materials Engineering, Anhui Science and Technology University, Bengbu, 233030, P. R. China
| | - Tingting Yao
- State Key Laboratory of Advanced Technology for Float Glass, Bengbu, 233018, P. R. China
| | - Yingchun Zhu
- Key Laboratory of Inorganic Coating Materials CAS, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, P. R. China
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Bingshe Xu
- Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan, 030024, P. R. China
| | - Xueji Zhang
- School of Biomedical Engineering, Shenzhen University Health Science Center, Shenzhen, Guangdong 518060, P. R. China
| |
Collapse
|
13
|
Elisadiki J, Gabookolwe MK, Onisuru OR, Meijboom R, Muiva C, King'ondu CK. Processing-properties-performance triad relationship in a Washingtonia robusta mesoporous carbon materials-based supercapacitor device. RSC Adv 2022; 12:12631-12646. [PMID: 35496340 PMCID: PMC9044445 DOI: 10.1039/d2ra01322c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/27/2022] [Accepted: 04/20/2022] [Indexed: 12/03/2022] Open
Abstract
Two-electrode electrochemical tests provide a close performance approximation to that of an actual supercapacitor device. This study presents mesoporous carbon materials successfully derived from Washingtonia robusta bark (Mexican fan palm) and their electrical performance in a 2-electrode supercapacitor device. The triad relationship among carbon materials “processing, properties, and performance” was comprehensively investigated. X-ray diffraction reveal that amorphousness increases with activating KOH ratio and decreases with both activation time and temperature. Raman spectroscopy shows an increase in structural defects and degree of graphitization with an increase in KOH ratio, temperature and time while transmission electron microscopy shows conversion of aggregated particles to materials with interconnected porosity and subsequent destruction of porosity with an increase in KOH ratio. A nitrogen-sorption study reveals varying trends between BET, micro and mesopore surface areas, however, pore size and volume and hysteresis loop size decreases with KOH ratio and temperature. Electrochemical studies on the other hand reveal that both the specific capacitance and charge–discharge time increase with KOH ratio, temperature and time while both charge transfer and Warburg resistances decrease and the phase angles increases towards the ideal −90° with an increase in KOH ratio, temperature and time. The device fabricated with the HHPB sample prepared at 700 °C, KOH ratio 3 for 60 min attained a specific capacitance of 179.3 and 169 F g−1 at a scan rate of 5 mV s−1 and current density of 0.5 A g−1, respectively, good cycling stability with 95% capacitance retention and 100% coulombic efficiency when cycled 5000 times at a current density of 2 A g−1. HHPB electrodes reveal perfect EDLC behavior with an energy density of 20 W h kg−1 and power density of 2000 W kg−1 when used in a symmetric coin supercapacitor cell with 6 M KOH solution. These findings show the potential of fan palm bark as electrode materials with good stability and high-rate capability for supercapacitor application. Electrode materials processing conditions, electrode properties and supercapacitor device performance show a triad relationship.![]()
Collapse
Affiliation(s)
- Joyce Elisadiki
- Department of Chemical and Forensic Sciences, Botswana International University of Science and Technology, Private Bag 16, Palapye, Botswana
- Department of Physics, University of Dodoma, P. O. Box 338, Dodoma, Tanzania
| | - Mavis K. Gabookolwe
- Department of Chemical and Forensic Sciences, Botswana International University of Science and Technology, Private Bag 16, Palapye, Botswana
| | - Oluwatayo R. Onisuru
- Department of Chemical Sciences, University of Johannesburg, Auckland Park, Johannesburg, South Africa
| | - Reinout Meijboom
- Department of Chemical Sciences, University of Johannesburg, Auckland Park, Johannesburg, South Africa
| | - Cosmas Muiva
- Department of Physics and Astronomy, Botswana International University of Science and Technology, Private Bag 16, Palapye, Botswana
| | - Cecil K. King'ondu
- Department of Chemical and Forensic Sciences, Botswana International University of Science and Technology, Private Bag 16, Palapye, Botswana
- Department of Physical Sciences, South Eastern Kenya University, P O Box 17090200, Kitui, Kenya
| |
Collapse
|
14
|
Wu Y, Wang Y, Pan L, Wu XR. Flute-type porous carbon derived from soybean shells for high-performance all-solid-state symmetric supercapacitors. RSC Adv 2022; 12:32600-32610. [PMID: 36425731 PMCID: PMC9661488 DOI: 10.1039/d2ra06216j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/04/2022] [Accepted: 10/31/2022] [Indexed: 11/16/2022] Open
Abstract
Flute-type porous carbon was successfully prepared from soybean shells through convenient methods. The influence of mass ratio on the structure and electrochemical performance of porous carbon obtained from soybean shells was investigated in detail. The obtained porous carbon exhibited a micro-tube morphology structure with a specific surface area of 2802 m2 g−1, pore volume of 1.36 cm3 g−1, and appropriate pore size distribution. The porous carbon showed good electrochemical properties as an electrode material for supercapacitors. The optimal porous carbon SSAC4 exhibited high specific capacitance of 465 F g−1 (1 A g−1) and 287 F g−1 (20 A g−1) in a three-electrode system with 6 M KOH electrolyte. In addition, the as-assembled SSAC4-based all-solid-state supercapacitors delivered a high specific capacitance of 294 F g−1 at 0.1 A g−1 and excellent cycling stability of 86.2% after 10 000 cycles at 5 A g−1. Flute type porous carbon is successfully derived from soybean shell through a convenient method. The porous carbon shows good electrochemical properties as an electrode material for supercapacitors.![]()
Collapse
Affiliation(s)
- Yan Wu
- School of Chemistry and Chemical Engineering, Huangshan University, Huangshan 245041, PR China
| | - Yan Wang
- School of Chemistry and Chemical Engineering, Huangshan University, Huangshan 245041, PR China
| | - Le Pan
- School of Chemistry and Chemical Engineering, Huangshan University, Huangshan 245041, PR China
| | - Xiao Ran Wu
- School of Chemistry and Chemical Engineering, Huangshan University, Huangshan 245041, PR China
| |
Collapse
|
15
|
Xiao X, Song L, Wang Q, Wang Z, Wang H, Chu J, Liu J, Liu X, Bian Z, Zhao X. Hierarchical hollow-tubular porous carbon microtubes prepared via a mild method for supercapacitor electrode materials with high volumetric capacitance. RSC Adv 2022; 12:16257-16266. [PMID: 35733697 PMCID: PMC9155178 DOI: 10.1039/d2ra02141b] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/02/2022] [Accepted: 05/20/2022] [Indexed: 11/23/2022] Open
Abstract
In this paper, hollow-tubular porous carbons were synthesized from abundant biomass Cycas fluff (CF) through simple carbonization followed by an NaHCO3 mild activation process. After activation, the tubular structure of the CF was retained, and a hierarchical structure of micropores, mesopores and macropores was formed. When the optimal mass ratio of NaHCO3/CF is 2, the obtained porous carbon CF-HPC-2 sample has a large specific surface area (SSA) of 516.70 m2 g−1 in Brunauer–Emmett–Teller (BET) tests and a total pore volume of 0.33 cm3 g−1. The C, O, N and S contents of CF-HPC-2 were tested as 91.77 at%, 4.09 at%, 3.54 at%, and 0.6 at%, respectively, by elemental analysis. Remarkably, CF-HPC-2 exhibits a high volume capacitance (349.1 F cm−3 at 1 A g−1) as well as a higher rate capability than other biomass carbon materials (289.1 F cm−3 at 10 A g−1). Additionally, the energy density of the CF-HPC-2 based symmetric supercapacitor in 2 M Na2SO4 electrolyte at 20 kW kg−1 is 27.72 W h kg−1. The particular hollow tubular morphology and activated porous structure determine the excellent electrochemical performance of the material. Hence, this synthetic method provides a new way of storing energy for porous carbon as high volumetric capacitance supercapacitor materials. In this paper, hollow-tubular porous carbons were synthesized from abundant biomass Cycas fluff (CF) through simple carbonization followed by an NaHCO3 mild activation process.![]()
Collapse
Affiliation(s)
- Xuan Xiao
- Anhui Key Laboratory of Spin Electron and Nanomaterials (Cultivating Base), Bio-based Functional Materials and Composite Technology Research Center, School of Chemistry and Chemical Engineering, Suzhou University, Suzhou 234000, PR China
| | - Lei Song
- Anhui Key Laboratory of Spin Electron and Nanomaterials (Cultivating Base), Bio-based Functional Materials and Composite Technology Research Center, School of Chemistry and Chemical Engineering, Suzhou University, Suzhou 234000, PR China
| | - Qianli Wang
- Anhui Key Laboratory of Spin Electron and Nanomaterials (Cultivating Base), Bio-based Functional Materials and Composite Technology Research Center, School of Chemistry and Chemical Engineering, Suzhou University, Suzhou 234000, PR China
| | - Zhicheng Wang
- Anhui Key Laboratory of Spin Electron and Nanomaterials (Cultivating Base), Bio-based Functional Materials and Composite Technology Research Center, School of Chemistry and Chemical Engineering, Suzhou University, Suzhou 234000, PR China
| | - Hongyan Wang
- Anhui Key Laboratory of Spin Electron and Nanomaterials (Cultivating Base), Bio-based Functional Materials and Composite Technology Research Center, School of Chemistry and Chemical Engineering, Suzhou University, Suzhou 234000, PR China
| | - Juncai Chu
- Anhui Key Laboratory of Spin Electron and Nanomaterials (Cultivating Base), Bio-based Functional Materials and Composite Technology Research Center, School of Chemistry and Chemical Engineering, Suzhou University, Suzhou 234000, PR China
| | - Jianmin Liu
- Anhui Key Laboratory of Spin Electron and Nanomaterials (Cultivating Base), Bio-based Functional Materials and Composite Technology Research Center, School of Chemistry and Chemical Engineering, Suzhou University, Suzhou 234000, PR China
| | - Xinru Liu
- Anhui Key Laboratory of Spin Electron and Nanomaterials (Cultivating Base), Bio-based Functional Materials and Composite Technology Research Center, School of Chemistry and Chemical Engineering, Suzhou University, Suzhou 234000, PR China
| | - Zhentao Bian
- Anhui Key Laboratory of Spin Electron and Nanomaterials (Cultivating Base), Bio-based Functional Materials and Composite Technology Research Center, School of Chemistry and Chemical Engineering, Suzhou University, Suzhou 234000, PR China
- Chemical Technology, Institute of Chemical Technology, China University of Mining &Technology, XuZhou, Jiangsu 221116, PR China
| | - Xuanxuan Zhao
- Suzhou Yifan Pharmaceutical Co., Ltd., Suzhou 234000, PR China
| |
Collapse
|
16
|
Zhang X, He S, Wo X, Han T, Kambonde JA, Wu J, Qiu X, Zhao L. Enhanced specific capacity and cycle stability of hybrid supercapacitors using carbonized polyphosphazene-based nanocomposites. Electrochim Acta 2021. [DOI: 10.1016/j.electacta.2021.139297] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
17
|
Wang Y, Zhang M, Shen X, Wang H, Wang H, Xia K, Yin Z, Zhang Y. Biomass-Derived Carbon Materials: Controllable Preparation and Versatile Applications. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2008079. [PMID: 34142431 DOI: 10.1002/smll.202008079] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/23/2020] [Revised: 02/10/2021] [Indexed: 06/12/2023]
Abstract
Biomass-derived carbon materials (BCMs) are encountering the most flourishing moment because of their versatile properties and wide potential applications. Numerous BCMs, including 0D carbon spheres and dots, 1D carbon fibers and tubes, 2D carbon sheets, 3D carbon aerogel, and hierarchical carbon materials have been prepared. At the same time, their structure-property relationship and applications have been widely studied. This paper aims to present a review on the recent advances in the controllable preparation and potential applications of BCMs, providing a reference for future work. First, the chemical compositions of typical biomass and their thermal degradation mechanisms are presented. Then, the typical preparation methods of BCMs are summarized and the relevant structural management rules are discussed. Besides, the strategies for improving the structural diversity of BCMs are also presented and discussed. Furthermore, the applications of BCMs in energy, sensing, environment, and other areas are reviewed. Finally, the remaining challenges and opportunities in the field of BCMs are discussed.
Collapse
Affiliation(s)
- Yiliang Wang
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education, Department of Chemistry, Tsinghua University, Beijing, 100084, P. R. China
- Institute for Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology, Karlsruhe, 76131, Germany
| | - Mingchao Zhang
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education, Department of Chemistry, Tsinghua University, Beijing, 100084, P. R. China
| | - Xinyi Shen
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education, Department of Chemistry, Tsinghua University, Beijing, 100084, P. R. China
- Cavendish Laboratory, University of Cambridge, Cambridge, CB2 1TN, UK
| | - Huimin Wang
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education, Department of Chemistry, Tsinghua University, Beijing, 100084, P. R. China
| | - Haomin Wang
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education, Department of Chemistry, Tsinghua University, Beijing, 100084, P. R. China
| | - Kailun Xia
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education, Department of Chemistry, Tsinghua University, Beijing, 100084, P. R. China
| | - Zhe Yin
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education, Department of Chemistry, Tsinghua University, Beijing, 100084, P. R. China
| | - Yingying Zhang
- Key Laboratory of Organic Optoelectronics and Molecular Engineering of the Ministry of Education, Department of Chemistry, Tsinghua University, Beijing, 100084, P. R. China
| |
Collapse
|
18
|
Liu Y, Niu B, Qi R, Zhang Y, Zhang Y, Li M. Poly(vinyl alcohol)‐assisted preparation of melamine resin‐derived thick plate‐like porous carbon for high‐performance all‐solid‐state supercapacitors. J Appl Polym Sci 2021. [DOI: 10.1002/app.50868] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Yujiao Liu
- School of Materials Science and Engineering Qilu University of Technology (Shandong Academy of Sciences) Jinan China
| | - Ben Niu
- School of Materials Science and Engineering Qilu University of Technology (Shandong Academy of Sciences) Jinan China
| | - Rixin Qi
- School of Materials Science and Engineering Qilu University of Technology (Shandong Academy of Sciences) Jinan China
| | - Yuheng Zhang
- School of Materials Science and Engineering Qilu University of Technology (Shandong Academy of Sciences) Jinan China
| | - Yunqiang Zhang
- School of Materials Science and Engineering Qilu University of Technology (Shandong Academy of Sciences) Jinan China
| | - Mei Li
- School of Materials Science and Engineering Qilu University of Technology (Shandong Academy of Sciences) Jinan China
| |
Collapse
|
19
|
Zhao X, Zhang M, Pan W, Yang R, Sun X. Self-Template Synthesis of Nitrogen-Doped Hollow Carbon Nanospheres with Rational Mesoporosity for Efficient Supercapacitors. MATERIALS 2021; 14:ma14133619. [PMID: 34209521 PMCID: PMC8269615 DOI: 10.3390/ma14133619] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/10/2021] [Revised: 06/16/2021] [Accepted: 06/16/2021] [Indexed: 11/16/2022]
Abstract
Rational design and economic fabrication are essential to develop carbonic electrode materials with optimized porosity for high-performance supercapacitors. Herein, nitrogen-doped hollow carbon nanospheres (NHCSs) derived from resorcinol and formaldehyde resin are successfully prepared via a self-template strategy. The porosity and heteroatoms in the carbon shell can be adjusted by purposefully introducing various dosages of ammonium ferric citrate (AFC). Under the optimum AFC dosage (30 mg), the as-prepared NHCS-30 possesses hierarchical architecture, high specific surface area up to 1987 m2·g-1, an ultrahigh mesopore proportion of 98%, and moderate contents of heteroatoms, and these features endow it with a high specific capacitance of 206.5 F·g-1 at 0.2 A·g-1, with a good rate capability of 125 F·g-1 at 20 A·g-1 as well as outstanding electrochemical stability after 5000 cycles in a 6 M KOH electrolyte. Furthermore, the assembled NHCS-30 based symmetric supercapacitor delivers an energy density of 14.1 W·h·kg-1 at a power density of 200 W·kg-1 in a 6 M KOH electrolyte. This work provides not only an appealing model to study the effect of structural and component change on capacitance, but also general guidance to expand functionality electrode materials by the self-template method.
Collapse
Affiliation(s)
- Xiang Zhao
- Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China; (X.Z.); (W.P.); (R.Y.)
- Lab. of Advanced Ceramics, Foshan Graduate School of Northeastern University, Foshan 528311, China
| | - Mu Zhang
- Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China; (X.Z.); (W.P.); (R.Y.)
- Lab. of Advanced Ceramics, Foshan Graduate School of Northeastern University, Foshan 528311, China
- Correspondence: (M.Z.); (X.S.)
| | - Wei Pan
- Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China; (X.Z.); (W.P.); (R.Y.)
- Lab. of Advanced Ceramics, Foshan Graduate School of Northeastern University, Foshan 528311, China
| | - Rui Yang
- Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China; (X.Z.); (W.P.); (R.Y.)
- Lab. of Advanced Ceramics, Foshan Graduate School of Northeastern University, Foshan 528311, China
| | - Xudong Sun
- Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China; (X.Z.); (W.P.); (R.Y.)
- Lab. of Advanced Ceramics, Foshan Graduate School of Northeastern University, Foshan 528311, China
- Correspondence: (M.Z.); (X.S.)
| |
Collapse
|
20
|
Wang XR, Wang X, Xu XP, Wu YQ, Lei WX, Zou YL, Ma ZS, Pan Y. Large Scale Synthesis of Three-dimensional Hierarchical Porous Framework with High Conductivity and its Application in Lithium Sulfur Battery. Chemistry 2021; 27:10628-10636. [PMID: 33837576 DOI: 10.1002/chem.202100484] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/08/2021] [Indexed: 11/10/2022]
Abstract
Quick capacity loss due to the polysulfide shuttle effects and poor rate performance caused by low conductivity of sulfur have always been obstacles to the commercial application of lithium sulfur batteries. Herein, an in-situ doped hierarchical porous biochar materials with high electron-ion conductivity and adjustable three-dimensional (3D) macro-meso-micropore is prepared successfully. Due to its unique physical structure, the resulting material has a specific surface area of 2124.9 m2 g-1 and a cumulative pore volume of 1.19 cm3 g-1 . The presence of micropores can effectively physically adsorb polysulfides and mesopores ensure the accessibility of lithium ions and active sites and give the porous carbon material a high specific surface area. The large pores provide channels for the storage of electrolyte and the transmission of ions on the surface of the substrate. The combined effect of these three kinds of pores and the N doping formed in-situ can effectively promote the cycle and rate performance of the battery. Therefore, prepared cathode can still reach a reversible discharge capacity of 616 mAh g-1 at a rate of 5 C. After 400 charge-discharge cycles at 1 C, the reversible capacity is maintained at 510.0 mAh g-1 . This new strategy has provided a new approach to the research and industrial-scale production of adjustable hierarchical porous biochar materials.
Collapse
Affiliation(s)
- Xu-Ri Wang
- National-Provincial Laboratory of Special Function Thin Film Materials, School of Materials Science and Engineering, Xiangtan University, 411105, Xiangtan, Hunan, P. R. China
| | - Xiao Wang
- National-Provincial Laboratory of Special Function Thin Film Materials, School of Materials Science and Engineering, Xiangtan University, 411105, Xiangtan, Hunan, P. R. China
| | - Xu-Peng Xu
- National-Provincial Laboratory of Special Function Thin Film Materials, School of Materials Science and Engineering, Xiangtan University, 411105, Xiangtan, Hunan, P. R. China
| | - Ya-Qin Wu
- National-Provincial Laboratory of Special Function Thin Film Materials, School of Materials Science and Engineering, Xiangtan University, 411105, Xiangtan, Hunan, P. R. China
| | - Wei-Xin Lei
- National-Provincial Laboratory of Special Function Thin Film Materials, School of Materials Science and Engineering, Xiangtan University, 411105, Xiangtan, Hunan, P. R. China
| | - You-Lan Zou
- National-Provincial Laboratory of Special Function Thin Film Materials, School of Materials Science and Engineering, Xiangtan University, 411105, Xiangtan, Hunan, P. R. China
| | - Zeng-Sheng Ma
- National-Provincial Laboratory of Special Function Thin Film Materials, School of Materials Science and Engineering, Xiangtan University, 411105, Xiangtan, Hunan, P. R. China
| | - Yong Pan
- National-Provincial Laboratory of Special Function Thin Film Materials, School of Materials Science and Engineering, Xiangtan University, 411105, Xiangtan, Hunan, P. R. China
| |
Collapse
|
21
|
Yan Z, Gao Z, Zhang Z, Dai C, Wei W, Shen PK. Graphene Nanosphere as Advanced Electrode Material to Promote High Performance Symmetrical Supercapacitor. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2007915. [PMID: 33749142 DOI: 10.1002/smll.202007915] [Citation(s) in RCA: 21] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/17/2020] [Revised: 02/20/2021] [Indexed: 06/12/2023]
Abstract
To get carbon electrode with both excellent gravimetric and volumetric capacitances at high mass loadings is critical to supercapacitors. Herein, cracked defective graphene nanospheres (GNS) well meet above requirements. The morphology and structure of the GNS are controlled by polystyrene sphere template/glucose ratio, microwave heating time, and Fe content. The typical GNS with specific surface area of 2794 m2 g-1 , pore volume of 1.48 cm3 g-1 , and packing density of 0.74 g cm-3 performs high gravimetric and volumetric capacitances of 529 F g-1 and 392 F cm-3 at 1A g-1 with a capacitance retention of 62.5% at 100 A g-1 in a three-electrode system in 6 mol L-1 KOH aqueous electrolyte. In a two-electrode system, the GNS possesses energy density of 18.6 Wh kg-1 (13.8 Wh L-1 ) at the power density of 504 W kg-1 , which is higher than all reported pure carbon materials in gravimetric energy density and higher than all reported heteroatom-doped carbon materials in volumetric energy density, in aqueous solution, as far as it is known. A structural feature of carbon materials that possess both high energy density and high power density is pointed out here.
Collapse
Affiliation(s)
- Zaoxue Yan
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu, 212013, P. R. China
| | - Zhihong Gao
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu, 212013, P. R. China
| | - Zongyao Zhang
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu, 212013, P. R. China
| | - Chengjing Dai
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu, 212013, P. R. China
| | - Wei Wei
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang, Jiangsu, 212013, P. R. China
| | - Pei Kang Shen
- Collaborative Innovation Center of Sustainable Energy Materials, Guangxi Key Laboratory of Electrochemical Energy Materials, School of Physical Science and Technology, Guangxi University, Nanning, 530004, P. R. China
| |
Collapse
|
22
|
Zhang P, Mu J, Guo Z, Wong SI, Sunarso J, Zhao Y, Xing W, Zhou J, Zhuo S. Watermelon Peel‐Derived Heteroatom‐Doped Hierarchical Porous Carbon as a High‐Performance Electrode Material for Supercapacitors. ChemElectroChem 2021. [DOI: 10.1002/celc.202100267] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
Affiliation(s)
- Pei Zhang
- School of Chemistry and Chemical Engineering Shandong University of Technology Zibo 255049 China
| | - Jiahui Mu
- School of Chemistry and Chemical Engineering Shandong University of Technology Zibo 255049 China
| | - Ziyu Guo
- School of Chemistry and Chemical Engineering Shandong University of Technology Zibo 255049 China
| | - Shao Ing Wong
- Research Centre for Sustainable Technologies Faculty of Engineering Computing and Science Swinburne University of Technology Kuching 93350 Malaysia
| | - Jaka Sunarso
- Research Centre for Sustainable Technologies Faculty of Engineering Computing and Science Swinburne University of Technology Kuching 93350 Malaysia
| | - Yi Zhao
- School of Chemistry and Chemical Engineering Shandong University of Technology Zibo 255049 China
| | - Wei Xing
- School of Materials Science and Engineering China University of Petroleum (East China) Qingdao 266580 China
| | - Jin Zhou
- School of Chemistry and Chemical Engineering Shandong University of Technology Zibo 255049 China
| | - Shuping Zhuo
- School of Chemistry and Chemical Engineering Shandong University of Technology Zibo 255049 China
| |
Collapse
|
23
|
Biomass-Derived Carbon Materials for High-Performance Supercapacitors: Current Status and Perspective. ELECTROCHEM ENERGY R 2021. [DOI: 10.1007/s41918-020-00090-3] [Citation(s) in RCA: 41] [Impact Index Per Article: 13.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
24
|
Zhang B, Liu P, Li Z, Song X. Synthesis of Two-Dimensional Sr-Doped LaNiO 3 Nanosheets with Improved Electrochemical Performance for Energy Storage. NANOMATERIALS 2021; 11:nano11010155. [PMID: 33435463 PMCID: PMC7827135 DOI: 10.3390/nano11010155] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/13/2020] [Revised: 12/30/2020] [Accepted: 12/31/2020] [Indexed: 11/16/2022]
Abstract
Designing a novel, efficient, and cost-effective nanostructure with the advantage of robust morphology and outstanding conductivity is highly promising for the electrode materials of high-performance electrochemical storage device. In this paper, a series of honeycombed perovskite-type Sr-doped LaNiO3 nanosheets with abundant porous structure were successfully synthesized by accurately controlling the Sr-doped content. The study showed that the optimal LSNO-0.4 (La0.6Sr0.4NiO3-δ) electrode exhibited excellent electrochemical performance, which showed a high capacity of 115.88 mAh g−1 at 0.6 A g−1. Furthermore, a hybrid supercapacitor device (LSNO//AC) based on LSNO-0.4 composites and activated carbon (AC) showed a high energy density of 17.94 W h kg−1, a high power density of 1600 W kg−1, and an outstanding long-term stability with 104.4% capacity retention after 16,000 cycles, showing an excellent electrochemical performance and a promising application as an electrode for energy storage.
Collapse
Affiliation(s)
- Bin Zhang
- School of Physics and Microelectronics, Zhengzhou University, Zhengzhou 450001, China;
| | - Ping Liu
- School of Electric and Information Engineering, Zhongyuan University of Technology, Zhengzhou 450007, China;
| | - Zijiong Li
- School of Physics & Electronic Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China
- Correspondence:
| | - Xiaohui Song
- Institute of Applied Physics, Henan Academy of Sciences, Zhengzhou 450058, China;
| |
Collapse
|
25
|
Miao H, Zhong W, Yuan H, Jiang W, Hu G. One-pot synthesis of nitrogen-doped carbons with hierarchically micro- and mesoporous structures for supercapacitors and CO 2 capture. NEW J CHEM 2021. [DOI: 10.1039/d0nj05523a] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/25/2023]
Abstract
Nitrogen-doped mesoporous carbons are considered promising candidates for supercapacitors and CO2 sorbents.
Collapse
Affiliation(s)
- Hangjin Miao
- Key Laboratory of the Ministry of Education for Advanced Catalysis Materials
- Zhejiang Key Laboratory for Reactive Chemistry on Solid Surfaces
- Zhejiang Normal University
- Jinhua 321004
- China
| | - Wenshi Zhong
- Key Laboratory of the Ministry of Education for Advanced Catalysis Materials
- Zhejiang Key Laboratory for Reactive Chemistry on Solid Surfaces
- Zhejiang Normal University
- Jinhua 321004
- China
| | - Huili Yuan
- Key Laboratory of the Ministry of Education for Advanced Catalysis Materials
- Zhejiang Key Laboratory for Reactive Chemistry on Solid Surfaces
- Zhejiang Normal University
- Jinhua 321004
- China
| | - Wei Jiang
- Key Laboratory of Unban Rail Transit Intelligent Operation and Maintenance Technology & Equipment of Zhejiang Province
- Zhejiang Normal University
- Jinhua 321004
- China
| | - Gengshen Hu
- Key Laboratory of the Ministry of Education for Advanced Catalysis Materials
- Zhejiang Key Laboratory for Reactive Chemistry on Solid Surfaces
- Zhejiang Normal University
- Jinhua 321004
- China
| |
Collapse
|
26
|
Zheng Y, Chen J, Lu Y, Song X, Shi Z. Direct synthesis of highly porous interconnected carbon nanosheets from sodium d-isoascorbic acid for the simultaneous determination of catechol and hydroquinone. NEW J CHEM 2021. [DOI: 10.1039/d0nj04479b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Interconnected porous carbon was prepared by pyrolyzing sodium d-isoascorbic acid. An electrochemical sensor for simultaneous detection of hydroquinone and catechol was fabricated by modification with porous carbon on the glassy carbon electrode surface.
Collapse
Affiliation(s)
- Yin Zheng
- Key Laboratory of Green Manufacturing of Super-light Elastomer Materials of State Ethnic Affairs Commission
- Hubei Minzu University
- Enshi 445000
- China
| | - Jiabing Chen
- Key Laboratory of Green Manufacturing of Super-light Elastomer Materials of State Ethnic Affairs Commission
- Hubei Minzu University
- Enshi 445000
- China
- School of Chemical and Environmental Engineering
| | - Youluan Lu
- Key Laboratory of Green Manufacturing of Super-light Elastomer Materials of State Ethnic Affairs Commission
- Hubei Minzu University
- Enshi 445000
- China
- School of Chemical and Environmental Engineering
| | - Xinjian Song
- School of Chemical and Environmental Engineering
- Hubei Minzu University
- Enshi 445000
- China
| | - Zhen Shi
- School of Chemical and Environmental Engineering
- Hubei Minzu University
- Enshi 445000
- China
| |
Collapse
|
27
|
Wei W, Luo S, Zhao Y, Li X, Liang B, Fang J, Luo M. A solution-assisted etching preparation of an MOF-derived NH4CoPO4·H2O/Ti3C2Tx MXene nanocomposite for high-performance hybrid supercapacitors. NEW J CHEM 2021. [DOI: 10.1039/d1nj01394g] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/23/2023]
Abstract
A novel synthetic is explored by introducing the Co-MOF(ZIF-67) into the layer space of Ti3C2Tx and subsequent in situ etching to transform into NH4CoPO4·H2O/Ti3C2Tx nanocomposite and used for high-performance hybrid supercapcitor.
Collapse
Affiliation(s)
- Wenhui Wei
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering
- School of Chemistry and Chemical Engineering
- Ningxia University
- Yinchuan
- P. R. China
| | - Shijian Luo
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering
- School of Chemistry and Chemical Engineering
- Ningxia University
- Yinchuan
- P. R. China
| | - Ying Zhao
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering
- School of Chemistry and Chemical Engineering
- Ningxia University
- Yinchuan
- P. R. China
| | - Xiaoman Li
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering
- School of Chemistry and Chemical Engineering
- Ningxia University
- Yinchuan
- P. R. China
| | - Bin Liang
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering
- School of Chemistry and Chemical Engineering
- Ningxia University
- Yinchuan
- P. R. China
| | - Junzhuo Fang
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering
- School of Chemistry and Chemical Engineering
- Ningxia University
- Yinchuan
- P. R. China
| | - Min Luo
- State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering
- School of Chemistry and Chemical Engineering
- Ningxia University
- Yinchuan
- P. R. China
| |
Collapse
|
28
|
Šimon E, Billik P, Orovčík Ľ, Nagy Š, Sasinková V, Palou MT, Škrátek M, Trembošová V, Plesch G. Aluminium powder as a reactive template for preparation of carbon flakes from CCl4. CHEMICAL PAPERS 2020. [DOI: 10.1007/s11696-020-01303-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
29
|
Wu D, Chen J, Zhang W, Liu W, Li J, Cao K, Gao Z, Xu F, Jiang K. Sealed pre-carbonization to regulate the porosity and heteroatom sites of biomass derived carbons for lithium-sulfur batteries. J Colloid Interface Sci 2020; 579:667-679. [DOI: 10.1016/j.jcis.2020.06.068] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/19/2019] [Revised: 06/13/2020] [Accepted: 06/15/2020] [Indexed: 11/17/2022]
|
30
|
Wang W, Saeed A, He J, Wang Z, Zhan D, Li Z, Wang C, Sun Y, Tao F, Xu W. Bio-inspired porous helical carbon fibers with ultrahigh specific surface area for super-efficient removal of sulfamethoxazole from water. J Colloid Interface Sci 2020; 578:304-314. [DOI: 10.1016/j.jcis.2020.05.117] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/15/2020] [Revised: 05/29/2020] [Accepted: 05/30/2020] [Indexed: 12/11/2022]
|
31
|
Parsimehr H, Ehsani A. Corn‐based Electrochemical Energy Storage Devices. CHEM REC 2020; 20:1163-1180. [DOI: 10.1002/tcr.202000058] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/07/2020] [Revised: 07/15/2020] [Accepted: 07/16/2020] [Indexed: 11/09/2022]
Affiliation(s)
- Hamidreza Parsimehr
- Department of Chemistry Faculty of Science University of Qom Qom Iran
- Color and Surface Coatings Group Polymer Processing Department Iran Polymer and Petrochemical Institute (IPPI) Tehran Iran
| | - Ali Ehsani
- Department of Chemistry Faculty of Science University of Qom Qom Iran
| |
Collapse
|
32
|
Synthesis and characterization of functionalized NaP Zeolite@CoFe2O4 hybrid materials: a micro–meso-structure catalyst for aldol condensation. RESEARCH ON CHEMICAL INTERMEDIATES 2020. [DOI: 10.1007/s11164-020-04085-z] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
33
|
Ramadass K, Sathish CI, MariaRuban S, Kothandam G, Joseph S, Singh G, Kim S, Cha W, Karakoti A, Belperio T, Yi JB, Vinu A. Carbon Nanoflakes and Nanotubes from Halloysite Nanoclays and their Superior Performance in CO 2 Capture and Energy Storage. ACS APPLIED MATERIALS & INTERFACES 2020; 12:11922-11933. [PMID: 32067462 DOI: 10.1021/acsami.9b21510] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Nanoporous carbon (HNC) with a flake and nanotubular morphology and a high specific surface area is prepared by using natural halloysite nanotubes (HNTs), a low-cost and naturally available clay material with a mixture of flaky and tubular morphology. A controlled pore-filling technique is used to selectively control the porosity, morphology, and the specific surface area of the HNC. Activated nanoporous carbon (AHNC) with a high specific surface area is also prepared by using HNT together with the activation process with zinc chloride (ZnCl2). HNC exhibits flakes and tubular morphologies, which offer a high specific surface area (837 m2/g). The specific surface area of AHNC is 1646 m2/g, 74 times greater than the specific surface area of pure HNT (22.5 m2/g). These data revealed that the single-step activation combined with the nanotemplating results in creating a huge impact on the specific surface area of the HNC. Both HNC and AHNC are employed as adsorbents for CO2 adsorption at different pressures and adsorption temperatures. The CO2 adsorption capacity of AHNC is 25.7 mmol/g at 0 °C, which is found to be significantly higher than that of activated carbon (AC), mesoporous carbon (CMK-3), mesoporous carbon nitride (MCN-1), and multiwalled carbon nanotube (MWCNT). AHNC is also tested as an electroactive material and demonstrates good supercapacitance, cyclic stability, and high capacitance retention. Specific capacitance of AHNC in the aqueous electrolyte is 197 F/g at 0.3 A/g, which is higher than that of AC, MWCNT, and CMK-3. The technique adopted for the preparation of both HNC and AHNC is quite unique and simple, has the potential to replace the existing highly expensive and sophisticated mesoporous silica-based nanotemplating strategy, and could also be applied for the fabrication of series of advanced nanostructures with unique functionalities.
Collapse
Affiliation(s)
- Kavitha Ramadass
- Global Innovative Center for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - C I Sathish
- Global Innovative Center for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Sujanya MariaRuban
- Global Innovative Center for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Gopalakrishnan Kothandam
- Global Innovative Center for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Stalin Joseph
- Global Innovative Center for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Gurwinder Singh
- Global Innovative Center for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Sungho Kim
- Global Innovative Center for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Wangsoo Cha
- Global Innovative Center for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Ajay Karakoti
- Global Innovative Center for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Tony Belperio
- Minotaur Exploration Pty Limited, Adelaide, South Australia 5067, Australia
| | - Jia Bao Yi
- Global Innovative Center for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| | - Ajayan Vinu
- Global Innovative Center for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, New South Wales 2308, Australia
| |
Collapse
|
34
|
Li Z, Ma K, Mi H, Ji C, Li Z, Guo F, He S, Wang C, Xu M, Pang H. Solid‐State Hybrid Supercapacitor Assembled from a Heterostructured Co−Ni Battery‐like Cathode and Supercapacitor‐Type Highly Disordered Carbon Nanosheets. ChemElectroChem 2020. [DOI: 10.1002/celc.201901800] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Zhan Li
- School of Chemistry and Chemical EngineeringXinjiang University Urumqi 830046 P. R. China
| | - Kongjun Ma
- School of Chemistry and Chemical EngineeringXinjiang University Urumqi 830046 P. R. China
| | - Hongyu Mi
- School of Chemistry and Chemical EngineeringXinjiang University Urumqi 830046 P. R. China
| | - Chenchen Ji
- School of Chemistry and Chemical EngineeringXinjiang University Urumqi 830046 P. R. China
| | - Zhiwei Li
- School of Chemistry and Chemical EngineeringXinjiang University Urumqi 830046 P. R. China
| | - Fengjiao Guo
- School of Chemistry and Chemical EngineeringXinjiang University Urumqi 830046 P. R. China
| | - Shixue He
- School of Chemistry and Chemical EngineeringXinjiang University Urumqi 830046 P. R. China
| | - Conghui Wang
- School of Materials Science and EngineeringNankai University Tianjin 300350 P. R. China
| | - Mengjiao Xu
- School of Chemistry and Chemical EngineeringXinjiang University Urumqi 830046 P. R. China
| | - Huan Pang
- School of Chemistry and Chemical EngineeringYangzhou University Jiangsu 225009 P.R. China
| |
Collapse
|
35
|
Liu S, Pan M, Feng Z, Qin Y, Wang Y, Tan L, Sun T. Ultra-high adsorption of tetracycline antibiotics on garlic skin-derived porous biomass carbon with high surface area. NEW J CHEM 2020. [DOI: 10.1039/c9nj05396d] [Citation(s) in RCA: 33] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Abstract
A porous carbon material with ultra-high specific surface area was prepared from waste garlic skin, and exhibited excellent adsorption properties to TCs in a water environment.
Collapse
Affiliation(s)
- Shujian Liu
- College of Sciences
- Northeastern University
- Shenyang
- P. R. China
| | - Mingdi Pan
- Chaoyang Inspection
- Examination & Certification Centre
- Chaoyang
- P. R. China
| | - Zhongmin Feng
- College of Sciences
- Northeastern University
- Shenyang
- P. R. China
| | - Yangchun Qin
- College of Sciences
- Northeastern University
- Shenyang
- P. R. China
| | - Yun Wang
- College of Sciences
- Northeastern University
- Shenyang
- P. R. China
| | - Lili Tan
- Shaanxi Joint Laboratory of Graphene Northwestern Polytechnical University
- Xi’an
- P. R. China
| | - Ting Sun
- College of Sciences
- Northeastern University
- Shenyang
- P. R. China
| |
Collapse
|
36
|
Meng L, Yin W, Wang S, Wu X, Hou J, Yin W, Feng K, Ok YS, Wang X. Photocatalytic behavior of biochar-modified carbon nitride with enriched visible-light reactivity. CHEMOSPHERE 2020; 239:124713. [PMID: 31494320 DOI: 10.1016/j.chemosphere.2019.124713] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/17/2019] [Revised: 08/27/2019] [Accepted: 08/28/2019] [Indexed: 06/10/2023]
Abstract
Ultra-thin layered structures and modified bandgaps are two efficient strategies to increase the photocatalytic performance of various materials for the semiconductor industry. In the present study, we combined both strategies in one material to form carbon-doped graphitic carbon nitride (g-C3N4) nano-layered structures by the method of melamine thermal condensation, in the presence of different mass ratios of biochar. The characterization showed that the composite with the best ratio retained the g-C3N4 polymeric framework and the bond with g-C3N4. The biochar was established via π-π stacking interactions and ether bond bridges. The π-conjugated electron systems provided from biochar can elevate charge separation efficiency. The ultra-thin structure also curtailed the distance of photogenerated electrons migrating to the surface and enlarge specific surface area of materials. The presence of carbon narrowed the bandgap and increased light absorption at a wider range of wavelengths of g-C3N4. The biochar/melamine ratio of 1:15 presented the best performance, 2.8 and 5 times faster than g-C3N4 degradating Rhodamine and Methyl Orange, respectively. Moreover, the catalyst presented a good stability for 4 cycles. In addition to that, biochar from waste biomass can be considered a sustainable, cost-effective, and efficient option to modify g-C3N4-based photocatalysts.
Collapse
Affiliation(s)
- Lirong Meng
- College of Environmental Science and Engineering, Yangzhou University, Jiangsu, 225127, China
| | - Wenhua Yin
- College of Environmental Science and Engineering, Yangzhou University, Jiangsu, 225127, China
| | - Shengsen Wang
- College of Environmental Science and Engineering, Yangzhou University, Jiangsu, 225127, China; Joint International Research Laboratory of Agriculture and Agri-Product Safety of Ministry of Education of China, Yangzhou University, Yangzhou, 225127, Jiangsu, China; Jiangsu Collaborative Innovation Center for Solid Organic Waste Resource Utilization, Nanjing, 210095, China
| | - Xiaoge Wu
- College of Environmental Science and Engineering, Yangzhou University, Jiangsu, 225127, China; Jiangsu Collaborative Innovation Center for Solid Organic Waste Resource Utilization, Nanjing, 210095, China
| | - Jianhua Hou
- College of Environmental Science and Engineering, Yangzhou University, Jiangsu, 225127, China; Jiangsu Collaborative Innovation Center for Solid Organic Waste Resource Utilization, Nanjing, 210095, China
| | - Weiqin Yin
- College of Environmental Science and Engineering, Yangzhou University, Jiangsu, 225127, China; Jiangsu Collaborative Innovation Center for Solid Organic Waste Resource Utilization, Nanjing, 210095, China
| | - Ke Feng
- College of Environmental Science and Engineering, Yangzhou University, Jiangsu, 225127, China; Joint International Research Laboratory of Agriculture and Agri-Product Safety of Ministry of Education of China, Yangzhou University, Yangzhou, 225127, Jiangsu, China; Jiangsu Collaborative Innovation Center for Solid Organic Waste Resource Utilization, Nanjing, 210095, China
| | - Yong Sik Ok
- Korea Biochar Research Center & Division of Environmental Science and Ecological Engineering, Korea University, Seoul, 02841, Republic of Korea.
| | - Xiaozhi Wang
- College of Environmental Science and Engineering, Yangzhou University, Jiangsu, 225127, China; Joint International Research Laboratory of Agriculture and Agri-Product Safety of Ministry of Education of China, Yangzhou University, Yangzhou, 225127, Jiangsu, China; Jiangsu Collaborative Innovation Center for Solid Organic Waste Resource Utilization, Nanjing, 210095, China.
| |
Collapse
|
37
|
Zhang L, Zhang X, Tian X, Wang Q, Li H, Jin L, Cao Q. Synthesis of a Novel Petal‐Shaped Biomass‐Derived Carbon Material with Controlled Pore Structure and Nitrogen Content for Use in Supercapacitors. ChemElectroChem 2019. [DOI: 10.1002/celc.201901856] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Luming Zhang
- Institute of Chemistry and Chemical EngineeringTaiyuan University of Technology Shanxi 030024 P.R. China
| | - Xiaohua Zhang
- Institute of Chemistry and Chemical EngineeringTaiyuan University of Technology Shanxi 030024 P.R. China
- Material science and Engineering SchoolTaiyuan University of Science and Technology Shanxi 030024 P.R. China
| | - Xin Tian
- Institute of Chemistry and Chemical EngineeringTaiyuan University of Technology Shanxi 030024 P.R. China
| | - Qun Wang
- Institute of Chemistry and Chemical EngineeringTaiyuan University of Technology Shanxi 030024 P.R. China
| | - Hengxiang Li
- Institute of Chemistry and Chemical EngineeringTaiyuan University of Technology Shanxi 030024 P.R. China
| | - Li'e Jin
- Institute of Chemistry and Chemical EngineeringTaiyuan University of Technology Shanxi 030024 P.R. China
| | - Qing Cao
- Institute of Chemistry and Chemical EngineeringTaiyuan University of Technology Shanxi 030024 P.R. China
| |
Collapse
|
38
|
Zhang Y, Tang Z. Waste Xylose Mother Liquor Derived 3 D Graphene‐Like Porous Carbon with Ultrahigh Specific Capacitance and Energy Density for Supercapacitors. ChemistrySelect 2019. [DOI: 10.1002/slct.201903810] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Yan‐Lei Zhang
- Shaanxi Collaborative Innovation Center of Industrialization of Traditional Chinese Medicine ResourcesShaanxi University of Chinese Medicine Xianyang 712083 P. R. China
| | - Zhi‐Shu Tang
- Shaanxi Collaborative Innovation Center of Industrialization of Traditional Chinese Medicine ResourcesShaanxi University of Chinese Medicine Xianyang 712083 P. R. China
| |
Collapse
|
39
|
Meng X, Chang P, Zhang J, Wang C, Chen M. Porous carbon nanospheres with moderately oriented domains for EDLC electrode. J CHIN CHEM SOC-TAIP 2019. [DOI: 10.1002/jccs.201800487] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Xiao Meng
- Key Laboratory for Green Chemical Technology of MOE, School of Chemical Engineering and TechnologyTianjin University Tianjin China
- Collaborative Innovation Center of Chemical Science and EngineeringTianjin University Tianjin China
| | - Pan‐pan Chang
- Key Laboratory for Green Chemical Technology of MOE, School of Chemical Engineering and TechnologyTianjin University Tianjin China
- Collaborative Innovation Center of Chemical Science and EngineeringTianjin University Tianjin China
| | - Ji‐zong Zhang
- Key Laboratory for Green Chemical Technology of MOE, School of Chemical Engineering and TechnologyTianjin University Tianjin China
- Collaborative Innovation Center of Chemical Science and EngineeringTianjin University Tianjin China
| | - Cheng‐yang Wang
- Key Laboratory for Green Chemical Technology of MOE, School of Chemical Engineering and TechnologyTianjin University Tianjin China
- Collaborative Innovation Center of Chemical Science and EngineeringTianjin University Tianjin China
| | - Ming‐ming Chen
- Key Laboratory for Green Chemical Technology of MOE, School of Chemical Engineering and TechnologyTianjin University Tianjin China
- Collaborative Innovation Center of Chemical Science and EngineeringTianjin University Tianjin China
| |
Collapse
|
40
|
Nitrogen-Doped Hierarchical Meso/Microporous Carbon from Bamboo Fungus for Symmetric Supercapacitor Applications. Molecules 2019; 24:molecules24203677. [PMID: 31614788 PMCID: PMC6832720 DOI: 10.3390/molecules24203677] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/17/2019] [Revised: 09/30/2019] [Accepted: 10/09/2019] [Indexed: 11/23/2022] Open
Abstract
We report the synthesis of nitrogen-doped hierarchical meso/microporous carbon using renewable biomass bamboo fungus as precursor via two-step pyrolysis processes. It is found that the developed porous carbon (NHPC-800) features honeycomb-like cellular framework with well-developed porosity, huge specific surface area (1708 m2 g−1), appropriate nitrogen-doping level (3.2 at.%) and high mesopore percentage (25.5%), which are responsible for its remarkable supercapacitive performances. Electrochemical tests suggest that the NHPC-800 electrode offers the largest specific capacitance of 228 F g−1, asplendid rate capability and stable electrochemical behaviors in a traditional three-electrode system. Additionally, asymmetric supercapacitor device is built based on this product as well. An individual as-assembled supercapacitor of NHPC-800//NHPC-800 delivers the maximum energy density of 4.3 Wh kg−1; retains the majority of capacitanceat large current densities; and shows terrific cycling durability with negligible capacitance drop after long-term charge/discharge for beyond 10,000 cycles even at a high current density of 10 A g−1. These excellent supercapacitive properties of NHPC-800 in both three- and two-electrode setups outperform those of lots of biomass-derived porous carbons and thus make it a perspective candidate for producing cost-effective and high-performance supercapacitors
Collapse
|
41
|
Template free and facile microwave-assisted synthesis method to prepare mesoporous copper sulfide nanosheets for high-performance hybrid supercapacitor. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2019.06.169] [Citation(s) in RCA: 27] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register]
|
42
|
Liu H, Tang QF, Qiu ZG, Chen XY, Zhang ZJ. Tuning Nitrogen Species in Two‐Dimensional Carbon through Pore Structure Change for High Supercapacitor Performance. ChemElectroChem 2019. [DOI: 10.1002/celc.201901336] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Hao Liu
- School of Chemistry and Chemical Engineering, Anhui Key Laboratory of Controllable Chemistry Reaction & Material Chemical EngineeringHefei University of Technology Hefei Anhui 230009 P. R. China
| | - Qian Fang Tang
- School of Chemistry and Chemical Engineering, Anhui Key Laboratory of Controllable Chemistry Reaction & Material Chemical EngineeringHefei University of Technology Hefei Anhui 230009 P. R. China
| | - Zhi Guo Qiu
- School of Chemistry and Chemical Engineering, Anhui Key Laboratory of Controllable Chemistry Reaction & Material Chemical EngineeringHefei University of Technology Hefei Anhui 230009 P. R. China
| | - Xiang Ying Chen
- School of Chemistry and Chemical Engineering, Anhui Key Laboratory of Controllable Chemistry Reaction & Material Chemical EngineeringHefei University of Technology Hefei Anhui 230009 P. R. China
| | - Zhong Jie Zhang
- School of Chemistry & Chemical Engineering, Anhui Province Key Laboratory of Environment-friendly Polymer MaterialsAnhui University Hefei Anhui 230009 P. R. China
| |
Collapse
|
43
|
Mu J, Li Q, Kong X, Wu X, Sunarso J, Zhao Y, Zhou J, Zhuo S. Characterization of Hierarchical Porous Carbons Made from Bean Curd via K
2
CO
3
Activation as a Supercapacitor Electrode. ChemElectroChem 2019. [DOI: 10.1002/celc.201900962] [Citation(s) in RCA: 16] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Jiahui Mu
- School of Chemistry and Chemical EngineeringShandong University of Technology Zibo 255049 China
| | - Qiang Li
- School of Chemistry and Chemical EngineeringShandong University of Technology Zibo 255049 China
| | - Xiangjin Kong
- School of Chemistry and Chemical EngineeringLiaocheng University Liaocheng 252000 China
| | - Xiaozhong Wu
- School of Chemistry and Chemical EngineeringShandong University of Technology Zibo 255049 China
| | - Jaka Sunarso
- Research Centre for Sustainable Technologies, Faculty of Engineering, Computing and ScienceSwinburne University of Technology, Jalan Simpang Tiga 93350 Kuching, Sarawak Malaysia
| | - Yi Zhao
- School of Chemistry and Chemical EngineeringShandong University of Technology Zibo 255049 China
| | - Jin Zhou
- School of Chemistry and Chemical EngineeringShandong University of Technology Zibo 255049 China
| | - Shuping Zhuo
- School of Chemistry and Chemical EngineeringShandong University of Technology Zibo 255049 China
| |
Collapse
|
44
|
Yu Y, Qiao N, Wang D, Zhu Q, Fu F, Cao R, Wang R, Liu W, Xu B. Fluffy honeycomb-like activated carbon from popcorn with high surface area and well-developed porosity for ultra-high efficiency adsorption of organic dyes. BIORESOURCE TECHNOLOGY 2019; 285:121340. [PMID: 30999193 DOI: 10.1016/j.biortech.2019.121340] [Citation(s) in RCA: 54] [Impact Index Per Article: 10.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/10/2019] [Revised: 04/05/2019] [Accepted: 04/10/2019] [Indexed: 06/09/2023]
Abstract
Fluffy honeycomb-like activated carbon with ultra-high surface area and well-developed hierarchical porous structure is simply prepared from popcorn by NaOH activation as adsorbent for dye removal. The popcorn has an unique fluffy structure, which originates from the corn via a rapid puffing process and is reserved during the following carbonization and NaOH activation. The ultra-high surface area and developed hierarchical porous structure make PDAC-4 show an outstanding adsorption capacity of 7765 mg·g-1 for Rhodamine B (2500 mg·L-1), which is several times higher than those of the adsorbents ever reported. Moreover, PDAC-4 also has excellent adsorption performance for other dyes, such as Congo Red, Methylene Blue and Methyl Orange. The superior adsorption performance of PDACs to organic dyes opens its potential application in the purification of dye wastewater.
Collapse
Affiliation(s)
- Yun Yu
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China
| | - Ning Qiao
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China
| | - Danjun Wang
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China; Shaanxi Key Laboratory of Chemical Reaction Engineering, School of Chemistry & Chemical Engineering, Yan'an University, Yan'an 716000, China
| | - Qizhen Zhu
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China
| | - Feng Fu
- Shaanxi Key Laboratory of Chemical Reaction Engineering, School of Chemistry & Chemical Engineering, Yan'an University, Yan'an 716000, China
| | - Ruiqi Cao
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China
| | - Ran Wang
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China
| | - Wei Liu
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China
| | - Bin Xu
- State Key Laboratory of Organic-Inorganic Composites, Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China.
| |
Collapse
|
45
|
Niu L, Shen C, Yan L, Zhang J, Lin Y, Gong Y, Li C, Sun CQ, Xu S. Waste bones derived nitrogen–doped carbon with high micropore ratio towards supercapacitor applications. J Colloid Interface Sci 2019; 547:92-101. [DOI: 10.1016/j.jcis.2019.03.097] [Citation(s) in RCA: 48] [Impact Index Per Article: 9.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/09/2018] [Revised: 03/25/2019] [Accepted: 03/29/2019] [Indexed: 10/27/2022]
|
46
|
Chu M, Li M, Han Z, Cao J, Li R, Cheng Z. Novel biomass-derived smoke-like carbon as a supercapacitor electrode material. ROYAL SOCIETY OPEN SCIENCE 2019; 6:190132. [PMID: 31417718 PMCID: PMC6689642 DOI: 10.1098/rsos.190132] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/11/2019] [Accepted: 06/24/2019] [Indexed: 06/01/2023]
Abstract
In this present work, smoke-like carbon was successfully fabricated from a bio-waste fungal substrate crude polysaccharide for the first time. The as-prepared products possess smoke-like structures, ultra-high specific surface area (S BET: 2160 m2 g-1) and a high content of micropores (microporous surface area of 60%, with a nanopore size of 0.70 nm), which can increase the specific capacitance, representing a wonderful structure for electrochemical energy storage devices. The as-prepared sample displayed an excellent specific capacitance of 152 F g-1 at 5 A g-1 in the three-electrode configuration and exhibited maximal densities of 6.8-10.2 W h kg-1 under power outputs of 253.4-24.3 kW kg-1. We believe that this work demonstrates a simple, green and low-cost route by using agricultural residue to prepare applicable carbon materials for use in energy storage devices.
Collapse
Affiliation(s)
- Mingxu Chu
- College of Resource and Environment, Jilin Agriculture University, Changchun, Jilin, People's Republic of China
| | - Mingtang Li
- College of Resource and Environment, Jilin Agriculture University, Changchun, Jilin, People's Republic of China
| | - Zhaolian Han
- College of Resource and Environment, Jilin Agriculture University, Changchun, Jilin, People's Republic of China
| | - Jinshan Cao
- College of Resource and Environment, Jilin Agriculture University, Changchun, Jilin, People's Republic of China
| | - Rui Li
- College of Resource and Environment, Jilin Agriculture University, Changchun, Jilin, People's Republic of China
| | - Zhiqiang Cheng
- College of Resource and Environment, Jilin Agriculture University, Changchun, Jilin, People's Republic of China
- College of Physics, Tsinghua University, Beijing, People's Republic of China
| |
Collapse
|
47
|
Novel Synthesis of Nitrogen-Containing Bio-Phenol Resin and Its Molten Salt Activation of Porous Carbon for Supercapacitor Electrode. MATERIALS 2019; 12:ma12121986. [PMID: 31226794 PMCID: PMC6631807 DOI: 10.3390/ma12121986] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/06/2019] [Revised: 06/14/2019] [Accepted: 06/19/2019] [Indexed: 11/21/2022]
Abstract
Nitrogen hybridization is an attractive way to enhance the wettability and electric conductivity of porous carbon, which increases the capacitance of carbon-based supercapacitor, however, there is lack of low-cost methods to prepare the nitrogen-doped porous carbon materials. Herein, a novel facile nitrogen-containing bio-phenolic resin was synthesized by polymerization of the carbamate bio-oil, Phenol and paraformaldehyde. As a precursor of nitrogen-doped porous carbon, the nitrogen-containing bio-phenol resin was activated by the one-step molten-salt method. The resultant nitrogen-doped porous carbon showed a high specific surface area up to 1401 m2·g−1. As a supercapacitor electrode, the nitrogen-doped porous carbons showed specific capacitance of 159 F·g−1 at 0.5 A·g−1. It also exhibited high cyclic stability with 94.8% retention of the initial specific capacitance over 1000 charge-discharge cycles at 1.0 A·g−1. The results suggest that these nitrogen-containing bio-phenol resin provide a new source of nitrogen-doped porous carbon for high-performance supercapacitor electrodes.
Collapse
|
48
|
Zhou J, Xu L, Li L, Li X. Polytetrafluoroethylene-assisted N/F co-doped hierarchically porous carbon as a high performance electrode for supercapacitors. J Colloid Interface Sci 2019; 545:25-34. [DOI: 10.1016/j.jcis.2019.03.010] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2018] [Revised: 03/02/2019] [Accepted: 03/04/2019] [Indexed: 11/26/2022]
|
49
|
Hou J, Jiang T, Wei R, Idrees F, Bahnemann D. Ultrathin-Layer Structure of BiOI Microspheres Decorated on N-Doped Biochar With Efficient Photocatalytic Activity. Front Chem 2019; 7:378. [PMID: 31179275 PMCID: PMC6544087 DOI: 10.3389/fchem.2019.00378] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/08/2019] [Accepted: 05/08/2019] [Indexed: 11/13/2022] Open
Abstract
Bismuth oxyiodide (BiOI) is among the most potential photocatalysts due to its photocatalytic activity under visible light irradiation. However, the photoinduced carrier separation efficiency has limited the BiOI photocatalytic activity. Herein, we utilized the direct carbonation of sapless cattail grass to obtain N-doped hierarchical structure cattail-based carbon (NCC). The NCC not only served as an appropriate host but also as a self-sacrificing template for BiOI microspheres for the preparation of BiOI/NCC composite material. The acidic solutions (HCl or AcOH) were used as a solvent which helped to obtain a well-defined micro/nano hierarchical BiOI microspheres composed of ultrathin nanosheets. Thus, BiOI/NCC composites were successfully designed through the in-situ self-template rapid dissolution-recrystallization mechanism. Additionally, numerous well-contacted interfaces were formed between NCC and BiOI, which served as an electron-acceptor bridge function for ultrafast electron transfer process in order to hinder the electron-hole pairs recombination. On account of the multiple synergistic effects of micro/nano hierarchical microsphere structure, ultrathin nanosheets, and well-contacted interface, the as-prepared BiOI/NCC composites exhibit the superior degradation of rhodamine B (RhB) than pure BiOI under visible light irradiation.
Collapse
Affiliation(s)
- Jianhua Hou
- School of Environmental Science and Engineering, Yangzhou University, Yangzhou, China.,Jiangsu Collaborative Innovation Center for Solid Organic Waste Resource Utilization, Nanjing, China
| | - Ting Jiang
- School of Environmental Science and Engineering, Yangzhou University, Yangzhou, China
| | - Rui Wei
- School of Environmental Science and Engineering, Yangzhou University, Yangzhou, China
| | - Faryal Idrees
- Department of Photocatalysis and Nanotechnology, Institut für Technische Chemie, Gottfried Wilhelm Leibniz Universität Hannover, Hannover, Germany.,Department of Physics, The University of Lahore, Lahore, Pakistan
| | - Detlef Bahnemann
- Department of Photocatalysis and Nanotechnology, Institut für Technische Chemie, Gottfried Wilhelm Leibniz Universität Hannover, Hannover, Germany.,Laboratorium für Nano- und Quantenengineering, Gottfried Wilhelm Leibniz Universität Hannover, Hannover, Germany
| |
Collapse
|
50
|
Sankar S, Ahmed ATA, Inamdar AI, Im H, Im YB, Lee Y, Kim DY, Lee S. Biomass-derived ultrathin mesoporous graphitic carbon nanoflakes as stable electrode material for high-performance supercapacitors. MATERIALS & DESIGN 2019; 169:107688. [DOI: 10.1016/j.matdes.2019.107688] [Citation(s) in RCA: 25] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/01/2023]
|