Facile Processing of Free-Standing Polyaniline/SWCNT Film as an Integrated Electrode for Flexible Supercapacitor Application

"Triple-synergistic effect" of K+ and PANI co-intercalation enabling the high-rate capability and stability of V2O5 for aqueous zinc-ion batteries

Vanadium-based materials are widely recognized as the primary candidate cathode materials for aqueous Zn-ion batteries (AZIBs). However, slow kinetics and poor stability pose significant challenges for widespread application. Herein, to address these issues, alkali metal ions and polyaniline (PANI) are introduced into layered hydrated V2O5 (VO). Density functional theory calculations reveal that the synthesized (C6H4NH)0.27K0.24V2O5·0.92H2O (KPVO), with K+ and PANI co-intercalation, exhibits a robust interlayer structure and a continuous three-dimensional (3D) electron transfer network. These properties facilitate the reversible diffusion of Zn2+ with a low migration potential barrier and rapid response kinetics. The KPVO cathode exhibits a discharge specific capacity of 418.3 mAh/g at 100 mA/g and excellent cycling stability with 89.5 % retention after 3000 cycles at 5 A/g. This work provides a general strategy for integrating cathode materials to achieve high specific capacity and excellent kinetic performance.

Iontophoretically controlled insulin delivery via water-soluble conductive polymer PANI:PSS and thermoplastic polyurethane matrix

Transdermal insulin delivery is an alternative route to deliver insulin through the body skin with the challenges to overcome the low drug skin permeability and high molecular weight. Polyaniline doped with poly(4-styrenesulfonic acid) (PANI:PSS), a conductive polymer with the high electrical conductivity, was synthesized and utilized as a drug carrier to improve the drug delivery capability from a porous thermoplastic polyurethane (TPU) matrix. The insulin was electrostatically attached to PANI:PSS based on the ion exchange between insulin and PSS. For the in vitro drug release of insulin loaded PANI:PSS relative to the pristine insulin alone, the amount of insulin released was improved to 84.70% with the time to equilibrium of 2 h under the electrical field of 6 V. For the ex vivo release-skin permeation, the amount insulin released and permeated became lower at 57.02% with time to equilibrium of 2 h, due to the pig skin acting as a barrier for insulin permeation. The modified insulin transdermal delivery, with PANI:PSS as the drug carrier and drug enhancer relative to without, is shown here to influence the insulin release rate, amount, and duration, suitable to treat diabetes patients.

Polyaniline-metal oxide coatings for biocidal applications: Mechanisms of activation and deactivation

Metal oxide (MO) coatings (e.g. TiO2, ZnO, and CuO) have shown great promise to inactivate pathogenic bacteria, maintain self-cleaning surfaces, and prevent infectious diseases spread via surface contact. Under light illumination, the antibacterial performance of photoactive MO coatings is determined by reactive oxygen species (ROS) generation. However, several drawbacks, such as photo-corrosion and rapid electron-hole recombination, hinder the ROS production of MO coatings and diminish their antibacterial efficiency. In this study, we employed polyaniline (PANI), an inexpensive and easy-to-synthesize conductive polymer, to fabricate polyaniline-metal oxide composite (PMC) films. The antibacterial performance of PMC films was tested using E. coli as the model bacterium and Lake Michigan water (LMW) as the background medium and revealed enhanced antibacterial performance relative to MO coatings alone (approximately 75-90 % kill of E. coli by PMC coatings in comparison to 20-40 % kill by MO coatings), which is explained by an increase in the ROS yields of PMC. However, with repeated use, the antibacterial performance of the PMC coatings is diminished due to deprotonation of the PANI in the neutral/slightly basic aqueous environment of LMW. Overall, PANI can enhance the antibacterial performance of MO coatings, but efforts need to be directed to preserve or regenerate PMC stability under environmental conditions and applications.

Molecular Engineering of Hierarchical Conducting Polymer Composites for Highly Stable Supercapacitors

Long cycle life and high energy/power density are imperative to energy storage systems. Polyaniline (PANI) has shown great potential as an electrode material but is limited by poor cycling and rate performance. We present a molecular design approach of binding short-chain aniline trimers (ATs) and carbon nanotubes (CNTs) through the formation of amide covalent linkages enabled by a simple laser scribing technique. The covalently coupled AT/CNT (cc-AT/CNT) composite retains 80% of its original capacitance after 20 000 charge/discharge cycles, which readily outperforms long-chain PANI/CNT composites without covalent connections. The compact AT/CNT heterointerfaces produce fast charge/discharge kinetics and excellent rate capability. The flexible symmetric quasi-solid-state devices can be stably cycled beyond 50 000 cycles, at least 5 times longer than most PANI/CNT-based symmetric supercapacitors reported to date. This molecular design of durable conducting polymer-based electrode materials enabled by laser irradiation presents a feasible approach toward robust advanced energy storage devices.

Intrinsically Conducting Polymer Composites as Active Masses in Supercapacitors

Intrinsically conducting polymers ICPs can be combined with further electrochemically active materials into composites for use as active masses in supercapacitor electrodes. Typical examples are inspected with particular attention to the various roles played by the constituents of the composites and to conceivable synergistic effects. Stability of composite electrode materials, as an essential property for practical application, is addressed, taking into account the observed causes and effects of materials degradation.

Conductive Polyaniline-Indium Oxide Composite Films Prepared by Sequential Infiltration Synthesis for Electrochemical Energy Storage

Composites of conductive polymers (CP) and metal oxides (MO) have attracted continued interest in the past decade for diverse application fields because the synergistic effects of CP and MO enable the realization of unusual electronic, electrochemical, catalytic, and mechanical properties of the composites. Herein, we present a novel method for the sequential infiltration synthesis of composite films of polyaniline (PANI) and indium oxide (InO _x ) with high electrical conductivities (4-9 S/cm). The synthesized composite films were composed of two phases of graded concentration: InO _x with oxygen vacancies and PANI with partially protonated molecular units. The PANI-InO _x composite films displayed enhanced electrochemical activity with a pair of well-defined redox peaks. The open interfacial regions between the InO _x and PANI phases may provide efficient pathways for ion diffusion and active sites for improved charge transfer.

Strategic Electrochemical Determination of Nitrate over Polyaniline/Multi-Walled Carbon Nanotubes-Gum Arabic Architecture

Significant agricultural and industrial activities necessitate the regular monitoring of nitrate (NO₃^-) ions levels in feed and groundwater. The current comparative study discloses an innovative user-friendly electrochemical approach for the determination of NO₃^- over polyaniline (PAni)-based modified electrodes. The electrochemical sensors concocted with PAni, multi-walled carbon nanotubes (CNT), and gum arabic (GA). The unique electrode material GA@PAni-CNT was synthesized by facile one-pot catalytic polymerization of aniline (Ani) with FeCl₃/H₂O₂ in the presence of CNT and GA as integral components. As revealed by cyclic voltammetry (CV), the anchoring/retention of NO₃^- followed by reduction is proposed to occur when a GA@PAni-CNT electrode is immersed in phosphate buffer electrolyte containing NO₃^- that eventually results in a significantly higher redox activity of the GA@PAni-CNT electrode upon potential scan. The mechanism of NO₃^- anchoring may be associated with the non-redox transition of leucomeraldine salt (LS) into emeraldine salt (ES) and the generation of nitrite (NO₂^-) ions. As a result, the oxidation current produced by CV for redox transition of ES ↔ pernigraniline (PN) was ~9 times of that obtained with GA@PAni-CNT electrode and phosphate buffer electrolyte, thus achieving indirect NO₃^- voltammetric determination of the GA@PAni-CNT electrode. The prepared GA@PAni-CNT electrode displayed a higher charge transfer ability as compared to that of PAni-CNT and PAni electrodes. The optimum square wave voltammetric (SWV) response resulted in two linear concentration ranges of 1-10 (R² = 0.9995) and 15-50 µM (R² = 0.9988) with a detection limit of 0.42 µM, which is significantly lower. The GA@PAni-CNT electrode demonstrated the best detection, sensitivity, and performance among the investigated electrodes for indirect voltammetric determination of NO₃^- that portrayed the possibility of utilizing GA-stabilized PAni and CNT nanocomposite materials in additional electrochemical sensing applications.

Silver sulfide decorated carbonaceous sawdust/ES-PANI composites as salt-resistant solar steam generator

Solar steam generation (SSG) is a potential approach for resolving the global water and energy crisis while causing the least amount of environmental damage. However, using adaptable photothermal absorbers with salt resistance through a simple, scalable, and cost-effective production approach is difficult. Herein, taking advantage of the ultra-fast water transportation in capillaries, and the large seawater storage capacity of wood, we develop a highly efficient natural evaporator. The wood wastes (sawdust) were carbonized at low temperatures to fabricate a green and low-cost carbonaceous porous material (CW). To enhance the salt resistance in high saline water, this evaporator was coated with polyaniline emeraldine salt (ES-PANI) which was synthesized through facile and cost-effective one-step oxidation of aniline. Furthermore, the composite was decorated with silver sulfide to increase the evaporation rate which reached up to 1.1 kg m⁻² h⁻¹ under 1 sun irradiation with 91.5% efficiency. Besides, the evaporator performs exceptionally well over 10 cycles due to the salt resistance capability of ES-PANI which generates a “Donnan exclusion” effect against cations in saline water. The Ag₂S@PANI/CW evaporator may be a viable large-scale generator of drinking water due to its high efficiency for energy conversion, simple and low-cost fabrication approach, salt-resistance, and durability.

Solar steam generation (SSG) is a potential approach for resolving the global water and energy crisis while causing the least amount of environmental damage.

Design and Testing of Autonomous Chargeable and Wearable Sweat/Ionic Liquid-Based Supercapacitors

This work demonstrates ionic liquid electrolyte-inscribed sweat-based dual electrolyte functioning supercapacitors capable of self-charging through sweat electrolyte function under a non-enzymatic route. The supercapacitor electrodes are fabricated from TREN (tris(2-aminoethyl)amine), poly-3,4-ethylenedioxythiophene, and a graphene oxide mixture with copper-mediated chelate, and this polymer-GO-metal chelate film can produce excellent energy harvest/storage performance from a sweat and ionic liquid integrated electrolyte system. The fabricated device is specifically designed to reduce deterioration using a typical planar structure. In the presence of sweat with ionic liquid, the dual electrolyte mode supercapacitor exhibits a maximum areal capacitance of 3600 mF cm^-2 , and the energy density is 450 mWhcm^-2 , which is more than 100 times greater than that from previously reported supercapacitors. The supercapacitors were fabricated/attached directly to textile fabrics as well as ITO-PET (Indium tin oxide (ITO)-polyethylene terephthalate (PET) film to study their performance on the human body during exercise. The self-charging performance with respect to sweat wetting time for the sweat@ionic liquid dual electrolyte showed that the supercapacitor performed well on both fabric and film. These devices exhibited good response for pH effect and biocompatibility, and as such present a promising multi-functional energy system as a stable power source for next-generation wearable smart electronics.

Supercapacitor based on polymeric binary composite of polythiophene and single-walled carbon nanotubes

The aim of this work is to fabricate supercapacitor electrode based on poly (3-hexyl-thiophene-2, 5-diyl) (P3HT) and single-walled carbon nanotubes (SWCNTs) nanocomposites with different ratios onto a graphite sheet as a substrate with a wide voltage window in nonaqueous electrolyte. Structural, morphological and electrochemical properties of the prepared nanocomposites of P3HT/SWCNTs were studied and discussed. The electrochemical properties included cyclic voltammetry (CV), galvanostatic charging-discharging (GCD), and electrochemical impedance spectroscopy (EIS) were investigated. The obtained results indicated that P3HT/SWCNTs nanocomposite possesses higher specific capacitance than that present in its individual component. The high electrochemical performance of the nanocomposite was due to formation of microporous structure which facilitates ions diffusion and electrolyte penetration in these pores. The morphological micrographs of the purified SWCNTs had buckypaper structure while the photomicrographs of P3HT/SWCNTs showed that SWCNTs appear behind and front of the P3HT nanospheres. The specific capacitance of 50% SWCNTs at 0.5 Ag⁻¹ was found to be 245.8 Fg⁻¹ compared with that of pure P3HT of 160.5 Fg⁻¹.

High Capacitive Antimonene/CNT/PANI Free-Standing Electrodes for Flexible Supercapacitor Engaged with Self-Healing Function

In virtue of the high electrochemical activity and inherent flexibility, polyaniline (PANI) is an ideal electrode material for flexible supercapacitors (SCs). However, in practical applications, the inevitable agglomeration of PANI leads to low capacitance, poor rate performance, and cycling stability. Here, antimonene (Sb) nanosheets with ultrathin thickness, excellent mechanical strength, and flexibility are introduced into the carbon nanotube (CNT) framework for PANI electrodeposition via simple vacuum filtration, which enables the continuous and uniform growth of PANI. The resultant free-standing Sb/CNT/PANI electrode can thus exhibit a high specific capacitance of 578.57 F g^-1 together with a high rate capability. Besides, thanks to the introduction of Sb nanosheets, the agglomeration of PANI during the electrodeposition is improved, which correspondingly alleviates the structural deterioration of PANI during repeated charge/discharge. Thus, the flexible SC assembled by Sb/CNT/PANI electrodes demonstrates both an impressive specific capacitance of 416 F g^-1 and outstanding cycling stability over 12 000 cycles. Moreover, this SC device can have a practical self-healing function by employing self-healable polyurethane. The facile strategy reported herein sheds light on the design of high-performance flexible SCs, catering to the needs of portable and wearable electronics.

Wearable Self-Powered Smart Sensors for Portable Nutrition Monitoring

Self-powered sensors have attracted great attention in the field of analysis owing to the necessity of power resources for the routine use of sensor devices. However, it is still challenging to construct wearable self-powered sensors in a simple and efficient way. Herein, wearable self-powered textile smart sensors based on advanced bifunctional polyaniline/reduced graphene oxide (PANI/RGO) films have been successfully developed for remote real-time detection of vitamin C. Specifically, a pH-assisted oil/water (O/W) self-assembly strategy was proposed to boost the O/W self-assembled PANI/RGO films via proton regulation. The as-obtained PANI/RGO films could be directly loaded on the textile substrate, with good capacitive and biosensing performance due to the multifunctionality of PANI and RGO, respectively. Moreover, both wearable power supply devices and wearable biosensors based on PANI/RGO films possess good electrochemical performance, which paves the way for the actual application of self-powered nutrition monitoring. Significantly, obvious signals have been obtained in the detection of vitamin C beverages, exhibiting promising application values in daily nutrition track necessities. Prospectively, this study would provide an effective and simple strategy for integrating wearable self-powered sensors, and the developed smart sensing system is an ideal choice for the portable detection of nutrition.

Construction of a Cu-Based Metal-Organic Framework by Employing a Mixed-Ligand Strategy and Its Facile Conversion into Nanofibrous CuO for Electrochemical Energy Storage Applications

Recently, metal-organic frameworks (MOFs) have been widely employed as a sacrificial template for the construction of nanostructured materials for a range of applications including energy storage. Herein, we report a facile mixed-ligand strategy for the synthesis of a Cu-MOF, [Cu₃(Azopy)₃(BTTC)₃(H₂O)₃·2H₂O]_n (where BTTC = 1,2,4,5-benzenetetracarboxylic acid and Azopy = 4,4'-azopyridine), via a slow-diffusion method at room temperature. X-ray analysis authenticates the two-dimensional (2D)-layered framework of Cu-MOF. Topologically, this 2D-layered structure is assigned as a 4-connected unimodal net with sql topology. Further, nanostructured CuO is obtained via a simple precipitation method by employing Cu-MOF as a precursor. After analysis of their physicochemical properties through various techniques, both materials are used as surface modifiers of glassy carbon electrodes for a comparative electrochemical study. The results reveal a superior charge storage performance of CuO (244.2 F g^-1 at a current density of 0.8 A g^-1) with a high rate capability compared to Cu-MOF. This observation paves the pathway for the strategic design of high-performing supercapacitor electrode materials.

Ten-Minute Synthesis of Highly Conductive Polymer Nanosheets on Ice Surfaces: Role of Ice Crystallinity

Conducting polymers have been studied widely over the past decades for use as organic electrode materials owing to their high electrical conductivity and low-cost synthesis. Among the various synthesis methods reported, the recently established ice-assisted approach for developing conducting polymer nanosheets is regarded as an advanced technology that allows for easy fabrication in an eco-friendly manner. However, the role of the crystallinity of the underlying ice surface in determining the physicochemical properties of the conducting polymers remains unclear. Here, the electronic properties and packing structures of polyaniline (PANI) nanosheets formed on ice surfaces are studied by controlling the ice crystallinity. Intriguingly, the crystallinity of the PANI nanosheets resembles that of the ice surfaces, in that the anisotropic growth of the PANI crystals with a face-on orientation occurs preferentially on high-crystalline ice surfaces. In addition, it is found that the development of highly crystalline PANI nanosheets results in efficient charge transport, owing to polaron delocalization in PANI with extended chain conformations and the improvement in the degree of backbone ordering because of the preorganized aniline moieties on the ice surface.

Sulfonic-Group-Grafted Ti3C2Tx MXene: A Silver Bullet to Settle the Instability of Polyaniline toward High-Performance Zn-Ion Batteries

Polyaniline (PANI) is a promising cathode material for Zn-ion batteries (ZIBs) due to its intrinsic conductivity and redox activity; however, the achievements of PANI in high-performance ZIBs are largely hindered by its instability during the repeated charge/discharge. Taking advantage of the high conductivity, flexibility, and grafting ability together, a surface-engineered Ti₃C₂T_x MXene is designed as a silver bullet to fight against the deprotonation and swelling/shrinking issues occurring in the redox process of PANI, which are the origins of its instability. Specifically, the sulfonic-group-grafted Ti₃C₂T_x(S-Ti₃C₂T_x) continuously provides protons to improve the protonation degree of PANI and maintains the polymer backbone at a locally low pH, which effectively inhibits deprotonation and brings high redox activity along with good reversibility. Meanwhile, the conductive and flexible natures of S-Ti₃C₂T_x assist the fast redox reaction of PANI and concurrently buffer its corresponding swelling/shrinking. Therefore, the S-Ti₃C₂T_x-enhanced PANI cathode simultaneously achieves a high discharge capacity of 262 mAh g^-1 at 0.5 A g^-1, a superior rate capability of 160 mAh g^-1 at 15 A g^-1, and a good cyclability over 5000 cycles with 100% coulombic efficiency. This work enlightens the development of versatile MXene via surface engineering for advanced batteries.

Enhanced Thermoelectric Performance of Carbon Nanotubes/Polyaniline Composites by Multiple Interface Engineering

Here, we put forward an effective strategy to regulate the interface structure of carbon nanotubes/polyaniline (CNTs/PANI) composite films and improve their thermoelectric (TE) properties by sequential dedoping-redoping treatment. Dedoping induces conductive resistance-undoped PANI to enhance the energy barrier between CNTs and PANI, leading to a greatly increased Seebeck coefficient and deteriorated conductivity. Subsequently, upon the redoping process, the electrical conductivity is dramatically improved owing to the generated conductive PANI chains, while Seebeck coefficient is maintained at 90% of the dedoped composites. This yields a significantly improved power factor of 407 μW m^-1 K^-2 from the as-prepared composites (234 μW m^-1 K^-2), which is the highest value among those of all the reported CNTs/PANI composites. The outstanding TE performanceis probably ascribed to the multiple interface structure of the PANI composite generated from incomplete dedoping and redoping processes, contributing to the enhanced carrier-filtering effect to retain a relatively high Seebeck coefficient and efficient charge transport to improve conductivity. Furthermore, the flexible TE device generates a high power of 1.5 μW at ΔT = 50 K, demonstrating the applicability of this composite for energy-harvesting electronic devices.

Enhancing Thermoelectric Performance of Polyaniline/Single-Walled Carbon Nanotube Composites via Dimethyl Sulfoxide-Mediated Electropolymerization

The fabrication of flexible high-performance organic/inorganic thermoelectric (TE) composite films has been a hot spot for researchers in recent years. In this work, dynamic 3-phase interfacial electropolymerization of aniline, together with physical mixing with single-walled carbon nanotubes (SWCNTs), was adopted to prepare polyaniline/SWCNT (PANI/SWCNT) TE composites. The dimethyl sulfoxide (DMSO) added into the electrochemical polymerization system affords strong capability in improving the TE performance of composite films. Moreover, varying loadings of SWCNTs can also conveniently tune the TE performance of composites. Hence, the resultant composites afford the highest power factor (PF) of 236.4 ± 5.9 μW m^-1 K^-2 at room temperature. This work demonstrates that the introduction of DMSO into the electrolyte and the electrochemical polymerization are highly effective in fabricating high-performance PANI/SWCNT TE composites.

1,3,6,8-Pyrenetetrasulfonic acid anchored doping to prepare solution-processable polyaniline for electrochromic supercapacitors

A new strategy to improve the ion transmission and stability of ESCs by introducing an anchored dopant during the polymerization of PANI has been proposed.

Reduced graphene oxide/polyaniline wrapped carbonized sponge with elasticity for energy storage and pressure sensing

Reduced graphene oxide/polyaniline wrapped carbonized sponge with elasticity for energy storage and pressure sensing.

Branched aramid nanofiber-polyaniline electrodes for structural energy storage

Strong electrodes with good energy storage capabilities are necessary to accommodate the current needs for structural and flexible electronics. To this end, conjugated polymers such as polyaniline (PANI) have attracted much attention due to their exceptional energy storage performance. However, PANI is typically brittle and requires the use of substrates for structural support. Here, we report a strategy for developing free-standing structural supercapacitor and battery electrodes based on PANI. More specifically, aniline is polymerized in the presence of branched aramid nanofibers (BANFs) and single walled carbon nanotubes (SWCNTs). This results in a network morphology that allows for efficient load transfer and electron transport, leading to electrodes with capacity values up to 128 ± 5 mA h g-1 (vs. a theoretical capacity of 147 mA h g-1), Young's modulus of 4 ± 0.5 GPa, and tensile strength of 40 ± 4 MPa. Furthermore, the charge storage mechanism is investigated, in which both Faradaic and non-Faradaic contributions are observed. This work demonstrates an efficient strategy for designing structural electrodes based on conjugated polymers.

High-performance supercapacitors based on polyaniline nanowire arrays grown on three-dimensional graphene with small pore sizes

Three-dimensional graphene (3D GR)-based hybrids have received significant attention due to their unique structures and promising applications in supercapacitors. In this paper, 3D GR with small pore sizes has been prepared by chemical vapor deposition using commercial nickel nanowires as the template. After nitric acid treatment, the hydrophilicity of 3D GR improved. Polyaniline nanowire arrays (PANI NWAs) have been successfully grown on its surface by in situ polymerization to obtain hybrid PANI NWA/3D GR. The results show that PANI NWAs with a length of ∼300 nm vertically grow on 3D GR with a pore diameter of ∼2 μm. The small pore size of 3D GR not only improves the mechanical properties of 3D GR, but also provides numerous sites for the growth of PANI NWAs. Meanwhile, PANI NWAs provide a shorter ion diffusion path and larger contact area with the electrolyte. Due to the unique structure, the hybrid exhibits a high specific capacitance of 789.9 F g^-1 at 10 mV s^-1. When it is assembled into a symmetric supercapacitor, it exhibits an energy density of 32.2 W h kg^-1 at a power density of 793.3 W kg^-1 and maintains a good cycle stability of 90% after 5000 cycles at 1.0 A g^-1.

Poly(3,4-ethylenedioxythiophene)/Te/Single-Walled Carbon Nanotube Composites with High Thermoelectric Performance Promoted by Electropolymerization

Electrochemical polymerization has proven very effective in fabricating flexible organic/inorganic composite films with high thermoelectric (TE) performance. In this work, dynamic three-phase interfacial electropolymerization of 3,4-ethylenedioxythiophene (EDOT) combined with physical mixing of single-walled carbon nanotubes (SWCNT) and tellurium nanowires was employed to prepare PEDOT/Te/SWCNT thermoelectric composites. When the loadings of Te and SWCNT were changed, the electropolymerized PEDOT exhibited great capability of improving TE properties of the resultant composites with a highest electrical conductivity (σ) of 900.3 ± 20.5 S cm^-1 and Seebeck coefficient (S) of 43.4 ± 0.6 μV K^-1, affording maximum power factor (PF) of 169.8 ± 7.8 μW m^-1 K^-2 at room temperature.

Hierarchical Porous RGO/PEDOT/PANI Hybrid for Planar/Linear Supercapacitor with Outstanding Flexibility and Stability

Many hybrid electrodes for supercapacitors (SCs) are a reckless combination without proper structural design that keeps them from fulfilling their potential. Herein, we design a reduced graphene oxide/poly(3,4-ethylenedioxythiophene)/polyaniline (RGO/PEDOT/PANI) hybrid with hierarchical and porous structure for high-performance SCs, where components fully harness their advantages, forming an interconnected and conductive framework with substantial reactive sites.Thus, this hybrid achieves a high capacitance of 535 F g-1 along with good rate capability and cyclability. The planar SC based on this hybrid deliver an energy density of 26.89 Wh kg-1 at a power density of 800 W kg-1. The linear SC developed via modifying a cotton yarn with the hybrid exhibits good flexibility and structural stability, which operates normally after arbitrary deformations. This work provides a beneficial reference for developing SCs.

One-Pot Hydrothermal Synthesis of Ternary 1T-MoS2 /Hexa-WO3 /Graphene Composites for High-Performance Supercapacitors

A new ternary composite of 1T-molybdenum disulfide, hexagonal tungsten trioxide, and reduced graphene oxide (M-W-rGO) is synthesized by using a one-pot hydrothermal process. The synergetic effect of 1T-MoS₂ and hexa-WO₃ nanoflowers improves the electrochemical performance for supercapacitors by inducing additional active sites and hexagonal tunnels, respectively, which lead to high storage capacity and easy transfer of electrolyte ions. The ternary M-W-rGO composite has a high specific capacitance of 836 F g^-1 at 1 A g^-1 , which is nearly twice that of binary composites of M-rGO and W-rGO with high capacitance retention of 86.35 % after 3000 cycles at a high current density of 5 A g^-1 . This study provides a new ternary composite that can be used as an electrode material for high-performance supercapacitors.

Recent Developments of the Solution-Processable and Highly Conductive Polyaniline Composites for Optical and Electrochemical Applications

Solution-processable conducting polymers (CPs) are an effective means for producing thin-film electrodes with tunable thickness, and excellent electrical, electrochemical, and optical properties. Especially, solution-processable polyaniline (PANI) composites have drawn a great deal of interest due to of their ease of film-forming, high conductivity up to 10³ S/cm, excellent redox behaviors, processability, and scalability. In this review, basic principles, fabrication methods, and applications of solution-processable PANI composites will be discussed. In addition, recent researches on the PANI-based electrodes for solar cells (SCs), electrochromic (EC) windows, thermoelectric (TE) materials, supercapacitors, sensors, antennas, electromagnetic interference (EMI) shielding, organic field-effect transistors (OFETs), and anti-corrosion coatings will be discussed. The presented examples in this review will offer new insights in the design and fabrication of high-performance electrodes from the PANI composite solutions for the development of thin-film electrodes for state-of-art applications.

Recyclable and tear-resistant all-in-one supercapacitor with dynamic electrode/electrolyte interface

All-in-one supercapacitors constitute an indispensable part in adapting to the rapid development of flexible energy storage equipment. Herein, an all-in-one configured PANI supercapacitor with a dynamic electrode/electrolyte interface was designed through hydrogen bonds and metal coordination bonds. The supercapacitor exhibits remarkable electrochemical capacitance (162 F g^-1 at 0.5 A g^-1, 137.4 mF cm^-2 at 0.5 A cm^-2) and excellent structural stabilities (almost no degradation in performance and structural damage in the cases of bending, folding, stretching and self-healing process). Besides, the hydrogel electrode can be efficiently recycled through a convenient method without virtual loss of electrochemical performance. Construction of the dynamic interface inside the supercapacitor provides a practical guidance for large-scale preparation of flexible energy storage devices, electronic skin and stretchable sensors.

In Situ Encapsulating Metal Oxides into Core-Shell Hierarchical Hybrid Fibers for Flexible Zinc-Ion Batteries toward High Durability and Ultrafast Capability for Wearable Applications

Rechargeable aqueous Zn-ion batteries are promising power sources for the advanced electronics because of their low cost, high safety, environmental friendliness, etc. However, their practical applications are severely restricted by the low energy density, poor rate capability, and low mass loading. In this work, a new type of the core-shell hierarchical structured hybrid fiber with encapsulated metal oxide nanoparticles is reported, which is used as a flexible cathode for aqueous Zn-ion batteries. The hierarchical hybrid fibers, consisting of one-dimensional (1D) central hollow shell and inside carbon network, build bicontinuous conductive pathways and highly porous networks for the in situ formed metal oxide nanoparticles. The core-shell hierarchical structure facilitates fast electron/ion transport and high mass loading; moreover, the 1D structure ensures good pliability and high flexibility. Two transition metal oxides, i.e., Zn₂V₂O₇ and V₂O₅, are employed to construct the hybrid fibers. Both hybrid fibers exhibit excellent electrochemical properties and superior high rate capabilities. They achieve the capacities of 162 mAh g^-1 (for Zn₂V₂O₇) and 409 mAh g^-1 (for V₂O₅) even at a high current density of 8 A g^-1. Moreover, the flexible Zn-ion batteries are fabricated on the basis of the hybrid fibers. The superior energy/power density and good long-term cycling stability demonstrate their good energy storage capability and fast charge/discharge capability. Especially, the well-retained performance under high degree of outside deformations further promotes their applications in wearable electronics.

Conjugated System of PEDOT:PSS-Induced Self-Doped PANI for Flexible Zinc-Ion Batteries with Enhanced Capacity and Cyclability

Owing to its electronic conductivity and electrochemical reactivity, polyaniline (PANI) can serve as the cathode for rechargeable zinc-ion batteries (ZIBs). However, it suffers from fast deactivation and thus performance deterioration because of spontaneous deprotonation during charge/discharge. Here, we report an effective strategy to improve the electrochemical reactivity and stability of the PANI-based cathode by constructing a π-electron conjugated system between PANI and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) on carbon nanotubes (CNTs). The impressive performance of the post-treated CNTs-PANI-PEDOT:PSS (t-CNTs-PA-PE) cathode is largely attributed to the -SO₃^-H⁺ groups in PSS, which acts as an internal proton reservoir and provides enough H⁺ for PANI's protonation, thus promoting its electrochemical activity and reversibility. Besides, the strong interactions between PANI and PEDOT:PSS assist the stretching of π-π conjugation chains, bringing about enhanced electronic conductivity. Consequently, the t-CNTs-PA-PE cathode achieves a high capacity of 238 mA h g^-1, together with good rate capability and long-term stability (over 1500 cycles with 100% Coulombic efficiency). Through exerting the freestanding t-CNTs-PA-PE, a flexible ZIB was further constructed with both outstanding electrochemical properties and superior high safety. This work demonstrates the availability of conducting polymer cathodes for high-performance ZIBs, fulfilling the need of flexible electronics.

Nanocellulose-Based Conductive Membranes for Free-Standing Supercapacitors: A Review

There is currently strong demand for the development of advanced energy storage devices with inexpensive, flexibility, lightweight, and eco-friendly materials. Cellulose is considered as a suitable material that has the potential to meet the requirements of the advanced energy storage devices. Specifically, nanocellulose has been shown to be an environmentally friendly material that has low density and high specific strength, Young's modulus, and surface-to-volume ratio compared to synthetic materials. Furthermore, it can be isolated from a variety of plants through several simple and rapid methods. Cellulose-based conductive composite membranes can be assembled into supercapacitors to achieve free-standing, lightweight, and flexible energy storage devices. Therefore, they have attracted extensive research interest for the development of small-size wearable devices, implantable sensors, and smart skin. Various conductive materials can be loaded onto nanocellulose substrates to endow or enhance the electrochemical performance of supercapacitors by taking advantage of the high loading capacity of nanocellulose membranes for brittle conductive materials. Several factors can impact the electronic performance of a nanocellulose-based supercapacitor, such as the methods of loading conductive materials and the types of conductive materials, as will be discussed in this review.

Application of Polyaniline for Li-Ion Batteries, Lithium-Sulfur Batteries, and Supercapacitors

Conducting polyaniline (PANI) exhibits interesting properties, such as high conductivity, reversible convertibility between redox states, and advantageous structural feature. It therefore receives ever-increasing attention for various applications. This Minireview evaluates recent studies on application of PANI for Li-ion batteries (LIBs), Li-S batteries (LSBs) and supercapacitors (SCPs). The flexible PANI is crucial for cyclability, especially for buffering the volumetric changes of electrode materials, in addition to enhancing the electron/ion transport. Furthermore, PANI can be directly used as an electroactive component in electrode materials for LIBs or SCPs and can be widely applied in LSBs due to its physically and chemically strong affinity for S and polysulfides. The evaluation of studies herein reveals significant improvements of electrochemical performance by physical/chemical modification and incorporation of PANI.