Covalent Porphyrin Framework-Derived Fe2P@Fe4N-Coupled Nanoparticles Embedded in N-Doped Carbons as Efficient Trifunctional Electrocatalysts

Simultaneous Protonation and Metalation of a Porphyrin Covalent Organic Framework Enhance Photodynamic Therapy

Covalent organic frameworks (COFs) have been explored for photodynamic therapy (PDT) of cancer, but their antitumor efficacy is limited by excited state quenching and low reactive oxygen species generation efficiency. Herein, we report a simultaneous protonation and metalation strategy to significantly enhance the PDT efficacy of a nanoscale two-dimensional imine-linked porphyrin-COF. The neutral and unmetalated porphyrin-COF (Ptp) and the protonated and metalated porphyrin-COF (Ptp-Fe) were synthesized via imine condensation between 5,10,15,20-tetrakis(4-aminophenyl)porphyrin and terephthalaldehyde in the absence and presence of ferric chloride, respectively. The presence of ferric chloride generated both doubly protonated and Fe3+-coordinated porphyrin units, which red-shifted and increased the Q-band absorption and disrupted exciton migration to prevent excited state quenching, respectively. Under light irradiation, rapid energy transfer from protonated porphyrins to Fe3+-coordinated porphyrins in Ptp-Fe enabled 1O2 and hydroxyl radical generation via type II and type I PDT processes. Ptp-Fe also catalyzed the conversion of hydrogen peroxide to hydroxy radical through a photoenhanced Fenton-like reaction under slightly acidic conditions and light illumination. As a result, Ptp-Fe-mediated PDT exhibited much higher cytotoxicity than Ptp-mediated PDT on CT26 and 4T1 cancer cells. Ptp-Fe-mediated PDT afforded potent antitumor efficacy in subcutaneous CT26 murine colon cancer and orthotopic 4T1 murine triple-negative breast tumors and prevented metastasis of 4T1 breast cancer to the lungs. This work underscores the role of fine-tuning the molecular structures of COFs in significantly enhancing their PDT efficacy.

In Situ Surface Restructuring of Amorphous Ni-Doped CoMo Phosphate-Based Three-Dimensional Networked Nanosheets: Highly Efficient and Durable Electrocatalyst for Overall Alkaline Water Splitting

Developing cost-efficient bifunctional electrocatalysts with high efficiency and durability for the production of green hydrogen and oxygen is a demanding and challenging research area. Due to their high earth abundance, transition metal-based electrocatalysts are alternatives to noble metal-based water splitting electrocatalysts. Herein, binder-free three-dimensional (3D) networked nanosheets of Ni-doped CoMo ternary phosphate (Pi) were prepared using a facile electrochemical synthetic strategy on flexible carbon cloth without any high-temperature heat treatment or complicated electrode fabrication. The optimized CoMoNiPi electrocatalyst delivers admirable hydrogen (η₁₀ = 96 mV) and oxygen (η₁₀ = 272 mV) evolution performances in 1.0 M KOH electrolyte. For overall water splitting in a two-electrode system, the present catalyst demands only 1.59 and 1.90 V to reach current densities of 10 and 100 mA/cm², respectively, which is lower than that of the Pt/C||RuO₂ couple (1.61 V @ 10 mA/cm², 2 V > @ 100 mA/cm²) and many other catalysts reported previously. Furthermore, the present catalyst delivers excellent long-term stability in a two-electrode system continuously over 100 h at a high current density of 100 mA/cm², exhibiting nearly 100% faradic efficiency. The unique 3D amorphous structure with high porosity, a high active surface area, and lower charge transfer resistance provides excellent overall water splitting. Notably, the amorphous structure of the present catalyst favors the in situ surface reconstruction during electrolysis and generates very stable surface-active sites capable of long-term performance. The present work provides a route for the preparation of multimetallic-Pi nanostructures for various electrode applications that are easy to prepare and have superior activity, high stability, and low cost.

Coordination compound-derived Fe4N/Fe3N/Fe/CNT for efficient electrocatalytic oxygen evolution: a facile one-step synthesis in the absence of extra nitrogen source

By annealing an Fe(III)-coordination compound (Fe-CC), [FeCl₃(Hbta)₂] (Hbta = benzotriazole) in the presence of a carbon nanotube precursor (PCNT) template, an Fe₄N/Fe₃N/Fe/CNT heterostructure was successfully synthesized without an extra nitrogen source. The decomposition of the Hbta in Fe-CC under high-temperature annealing can produce carbon sheets and reduced graphene oxide (rGO), and the presence of CNTs can alleviate the stacking of thein situ-generated carbon materials. Meanwhile, iron nitride nanoparticles (NPs) can be anchored on the carbon sheets, and the anchoring effect efficiently prevents the agglomeration of NPs and increases the amount of active catalytic sites for the oxygen evolution reaction (OER). Fe₄N/Fe₃N/Fe/CNT shows an excellent OER activity with a Tafel slope of 63 mV dec^-1as well as overpotentials of 121 (η₁₀) and 275 mV (η₁₀₀) at 10 and 100 mA cm^-2, respectively - far exceeding commercial RuO₂and other catalysts. Density functional theory calculations show that the excellent OER performance of Fe₄N/Fe₃N/Fe/CNT is associated with the Fe₄N/Fe₃N heterojunction, which can improve the electron conductivity and boost the electron transfer from N to Fe. The Fe₄N/Fe₃N/Fe/CNT catalyst exhibits long-term OER activity during 100 h of electrolysis at 20 mA cm^-2. This is related to the dual coatings of thein situ-generated thin carbon shell and few-layered rGO on the surface of the iron nitride NPs, which can protect the fast leaching of iron nitride during the OER process. Furthermore, the effects of the annealing temperature, the PCNT template and the heating rate on the calcined products were investigated.

Modulating the Band Structure of Metal Coordinated Salen COFs and an In Situ Constructed Charge Transfer Heterostructure for Electrocatalysis Hydrogen Evolution

A series of crystalline, stable Metal (Metal = Zn, Cu, Ni, Co, Fe, and Mn)-Salen covalent organic framework (COF)_EDA complex are prepared to continuously tune the band structure of Metal-Salen COF_EDA , with the purpose of optimizing the free energy intermediate species during the hydrogen evolution reaction (HER) process. The conductive macromolecular poly(3,4-ethylenedioxythiophene) (PEDOT) is subsequently integrated into the one-dimensional (1D) channel arrays of Metal-Salen COF_EDA to form heterostructure PEDOT@Metal-Salen COF_EDA via the in situ solid-state polymerization method. Among the Metal-Salen COF_EDA and PEDOT@Metal-Salen COF_EDA complexes, the optimized PEDOT@Mn-Salen COF_EDA displays prominent electrochemical activity with an overpotential of 150 mV and a Tafel slope of 43 mV dec^-1 . The experimental results and density of states data show that the continuous energy band structure modulation in Metal-Salen COF_EDA has the ability to make the metal d-orbital interact better with the s-orbital of H, which is conducive to electron transport in the HER process. Moreover, the calculated charge density difference indicates that the heterostructures composed of PEDOT and Metal-Salen COF_EDA induce an intramolecular charge transfer and construct highly active interfacial sites.

Recent Advances in Porphyrin-Based Systems for Electrochemical Oxygen Evolution Reaction

Oxygen evolution reaction (OER) plays a pivotal role in the development of renewable energy methods, such as water-splitting devices and the use of Zn–air batteries. First-row transition metal complexes are promising catalyst candidates due to their excellent electrocatalytic performance, rich abundance, and cheap price. Metalloporphyrins are a class of representative high-efficiency complex catalysts owing to their structural and functional characteristics. However, OER based on porphyrin systems previously have been paid little attention in comparison to the well-described oxygen reduction reaction (ORR), hydrogen evolution reaction, and CO2 reduction reaction. Recently, porphyrin-based systems, including both small molecules and porous polymers for electrochemical OER, are emerging. Accordingly, this review summarizes the recent advances of porphyrin-based systems for electrochemical OER. Firstly, the electrochemical OER for water oxidation is discussed, which shows various methodologies to achieve catalysis from homogeneous to heterogeneous processes. Subsequently, the porphyrin-based catalytic systems for bifunctional oxygen electrocatalysis including both OER and ORR are demonstrated. Finally, the future development of porphyrin-based catalytic systems for electrochemical OER is briefly prospected.

Interfacial Engineering of a Phase-Controlled Heterojunction for High-Efficiency HER, OER, and ORR Trifunctional Electrocatalysis

The development of low-cost and high-performance electrocatalysts for simultaneously boosting the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) is highly crucial but still challenging. Herein, a facile one-step solid-phase polymerization and confined pyrolysis strategy is developed for scalable synthesis of a Fe _x P/Fe₃C-based (x = 1, 2) heterojunction with controllable iron phosphide crystal phases. By effective heterojunction interface regulation, the strong synergic effect between FeP/Fe₃C and N- and P-codoped carbon (NPC) modified the electronic structure, resulting in an excellent electrocatalytic performance for the HER, OER, and ORR synchronously. Typically, the FeP/Fe₃C@NPC catalyst exhibits efficient HER activity with a low overpotential of 10 mA cm^-2 for the HER (97 mV) and OER (440 mV) and a high half-wave potential of 0.87 V for the ORR, as well as excellent stability in alkaline media. Theoretical calculations demonstrated that Fe₃C can promote the activation of water molecules, while FeP is beneficial to the removal of H₂ and the FeP/Fe₃C heterojunction can facilitate both Volmer and Heyrovsky steps in the HER process simultaneously. Moreover, FeP has a stronger inhibitory effect on OH adsorption, revealing that the FeP/Fe₃C heterojunction also shows a better promoting effect for both the OER and ORR, respectively.

Biobased polyporphyrin derived porous carbon electrodes for highly efficient capacitive deionization

Recently, capacitive deionization (CDI) has attracted considerable interest as a potential desalination technique for seawater. It is thus desirable to develop low-cost, sustainable, and efficient electrode materials for desalination. In this study, the polyporphyrin was prepared by a one-pot reaction from biobased furan derivative, followed by activation to manufacture nitrogen-doped polyporphyrin derived porous carbons (NPPCs) for efficient capacitive deionization. In the presence of KOH as a pore activator, NPPCs exhibited cross-linked interconnected nanosphere chain-like structures inherited from the polyporphyrin backbone with coexisting mesopores and micropores, leading to extremely high specific surface area (2979.3 m² g^-1) and large pore volume (2.22 cm³ g^-1). The electrochemical measurements revealed good conductivity, outstanding stability, and extraordinary specific capacitance (328.7 F g^-1) of NPPCs, which can be ascribed to rich nitrogen content (8.0 at%) and high Pyrrolic nitrogen ratio. Due to their superior hierarchical porous structure and excellent electrochemical performance, the NPPC-800 electrodes presented a high salt adsorption capacity (SAC) of 35.7 mg g^-1 and outstanding cycling stability in 10 mM NaCl solution at 1.2 V during the desalination tests. This work demonstrates the utilization of biobased porous carbon material will pave a prospective way in sustainable and potential applications for CDI technique.

(FexNi1−x)4N nanoparticles: magnetism and electrocatalytic properties for the oxygen evolution reaction

(FexNi1−x)4N nanoparticles (NPs) encased within amorphous carbon were prepared by a facile route and the positive effect of nickel doping content on the magnetic and OER catalytic performance of γ′-Fe4N was investigated.

Nanostructured Fe-N-C as Bifunctional Catalysts for Oxygen Reduction and Hydrogen Evolution

The development of electrocatalysts for energy conversion and storage devices is of paramount importance to promote sustainable development. Among the different families of materials, catalysts based on transition metals supported on a nitrogen-containing carbon matrix have been found to be effective catalysts toward oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) with high potential to replace conventional precious metal-based catalysts. In this work, we developed a facile synthesis strategy to obtain a Fe-N-C bifunctional ORR/HER catalysts, involving wet impregnation and pyrolysis steps. Iron (II) acetate and imidazole were used as iron and nitrogen sources, respectively, and functionalized carbon black pearls were used as conductive support. The bifunctional performance of the Fe-N-C catalyst toward ORR and HER was investigated by cyclic voltammetry, rotating ring disk electrode experiments, and electrochemical impedance spectroscopy in alkaline environment. ORR onset potential and half-wave potential were 0.95 V and 0.86 V, respectively, indicating a competitive performance in comparison with the commercial platinum-based catalyst. In addition, Fe-N-C had also a good HER activity, with an overpotential of 478 mV @10 mAcm−2 and Tafel slope of 133 mVdec−1, demonstrating its activity as bifunctional catalyst in energy conversion and storage devices, such as alkaline microbial fuel cell and microbial electrolysis cells.

Two-Dimensional Polymers and Polymerizations

Synthetic chemists have developed robust methods to synthesize discrete molecules, linear and branched polymers, and disordered cross-linked networks. However, two-dimensional polymers (2DPs) prepared from designed monomers have been long missing from these capabilities, both as objects of chemical synthesis and in nature. Recently, new polymerization strategies and characterization methods have enabled the unambiguous realization of covalently linked macromolecular sheets. Here we review 2DPs and 2D polymerization methods. Three predominant 2D polymerization strategies have emerged to date, which produce 2DPs either as monolayers or multilayer assemblies. We discuss the fundamental understanding and scope of each of these approaches, including: the bond-forming reactions used, the synthetic diversity of 2DPs prepared, their multilayer stacking behaviors, nanoscale and mesoscale structures, and macroscale morphologies. Additionally, we describe the analytical tools currently available to characterize 2DPs in their various isolated forms. Finally, we review emergent 2DP properties and the potential applications of planar macromolecules. Throughout, we highlight achievements in 2D polymerization and identify opportunities for continued study.

Facile synthesis of Fe-doped CoP nanosheet arrays wrapped by graphene for overall water splitting

The development of durable, beneficial, and highly active non-precious metal-based electrocatalysts for hydrogen generation is a vital concern. This study proposes an effective strategy for the construction of Fe doped CoP nanosheet arrays wrapped by graphene (F_0.25CP-G) on nickel foam as an efficient electrocatalyst for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). In this design, the final catalyst possesses a combination of the high conductivity of graphene, great surface porosity, and the intrinsic electrocatalytic activity of the F_0.25CP-G which results in high-performance electrocatalytic activity toward the HER and OER. Therefore, the as-synthesized F_0.25CP-G catalyst can achieve overpotentials of 66 mV and 230 mV for the HER and OER, respectively, in KOH at 10 mA cm^-2. Furthermore, a practical electrolyzer (F_0.25CP-G||F_0.25CP-G) exhibits a current density of 10 mA cm^-2 at 1.60 V along with good durability for 24 h.

Co/MoC Nanoparticles Embedded in Carbon Nanoboxes as Robust Trifunctional Electrocatalysts for a Zn-Air Battery and Water Electrocatalysis

To meet the application needs of rechargeable Zn-air battery and electrocatalytic overall water splitting (EOWS), developing high-efficiency, cost-effective, and durable trifunctional catalysts for the hydrogen evolution reaction (HER), oxygen evolution, and reduction reaction (OER and ORR) is extremely paramount yet challenging. Herein, the interface engineering concept and nanoscale hollowing design were proposed to fabricate N-doping carbon nanoboxes confined with Co/MoC nanoparticles. Uniform zeolitic imidazolate framework nanocube was employed as the starting material to construct the trifunctional electrocatalyst through the conformal polydopamine-Mo layer coating and the subsequent pyrolysis treatment. The Co@IC/MoC@PC catalyst displayed superior electrochemical ORR performances with a positive half-wave potential of 0.875 V and a high limiting current density of 5.89 mA/cm². When practically employed as an electrocatalyst in regenerative Zn-air battery, a high specific capacity of 728 mAh/g, a large peak power density of 221 mW/cm², a high open-circuit voltage of 1.482 V, and a low charge/discharge voltage gap of 0.41 V were obtained. Moreover, its practicability was further exploited by overall water splitting, affording low overpotentials of 277 and 68 mV at 10 mA/cm² for the OER and HER in 1 M KOH solution, respectively, and a decent operating potential of 1.57 V for EOWS. Ultraviolet photoelectron spectroscopy and density functional theory calculation revealed that the Co/MoC interface synergistically facilitated the charge-transfer, thereby contributing to the enhancements of electrocatalytic ORR/OER/HER processes. More importantly, this catalyst design concept can offer some interesting prospects for the construction of outstanding trifunctional catalysts toward various energy conversion and storage devices.

Bioinspired interfacial engineering of a CoSe2 decorated carbon framework cathode towards temperature-tolerant and flexible Zn-air batteries

A high-performance air electrode is essential for the successful application of flexible Zn-air batteries in wearable devices. However, endowing the electrode-electrolyte interface with high stability and fast electron/ion transportation is still a great challenge. Herein, we report a bioinspired interfacial engineering strategy to construct a cactus-like hybrid electrode comprising CoSe2 nanoparticles embedded in an N-doped carbon nanosheet arrays penetrated with carbon nanotubes (CoSe2-NCNT NSA). Associated with the synergistic effect of highly active CoSe2 nanoparticles and N-doped carbon moieties and a stable 3D interconnected CNT network, the obtained self-standing electrode exhibits satisfactory catalytic activities towards oxygen evolution/reduction and hydrogen evolution, as well as an enhanced electrode-electrolyte interaction/interface area, and thus delivers superior performance for flexible Zn-air batteries. Remarkably, the fabricated flexible Zn-air battery with this CoSe2-NCNT NSA cathode achieves a high peak power density (51.1 mW cm-2), considerable mechanical flexibility, and excellent durability in a wide temperature range of 0 to 40 °C. Furthermore, the assembled Zn-air batteries can efficiently power a water-splitting device that adopts the CoSe2-NCNT NSA as both the anode and cathode, demonstrating promising potential in energy conversion and portable electronic applications.

A Co-MOF-derived Co9S8@NS-C electrocatalyst for efficient hydrogen evolution reaction

The exploitation of efficient hydrogen evolution reaction (HER) electrocatalysts has become increasingly urgent and imperative; however, it is also challenging for high-performance sustainable clean energy applications. Herein, novel Co9S8 nanoparticles embedded in a porous N,S-dual doped carbon composite (abbr. Co9S8@NS-C-900) were fabricated by the pyrolysis of a single crystal Co-MOF assisted with thiourea. Due to the synergistic benefit of combining Co9S8 nanoparticles with N,S-dual doped carbon, the composite showed efficient HER electrocatalytic activities and long-term durability in an alkaline solution. It shows a small overpotential of -86.4 mV at a current density of 10.0 mA cm-2, a small Tafel slope of 81.1 mV dec-1, and a large exchange current density (J 0) of 0.40 mA cm-2, which are comparable to those of Pt/C. More importantly, due to the protection of Co9S8 nanoparticles by the N,S-dual doped carbon shell, the Co9S8@NS-C-900 catalyst displays excellent long-term durability. There is almost no decay in HER activities after 1000 potential cycles or it retains 99.5% of the initial current after 48 h.

Atomic Fe & FeP nanoparticles synergistically facilitate oxygen reduction reaction of hollow carbon hybrids

Exploring highly active non-noble metal oxygen reduction reaction (ORR) catalysts and understanding the mechanism are very essential for future energy conversion and storage devices. Herein, we provide a novel method to produce FeP nanoparticles and single atom Fe co-doped porous hollow carbon hybrids (FeP@SA-Fe/HC) from iron metal-organic framework (NH₂-MIL(Fe)), phytic acid and melamine. Interestingly, thanks for the co-existence of the atomic Fe and FeP nanoparticles, porous hollow microstructure, and heteroatom doping, the obtained FeP@SA-Fe/HC-900 hybrid shows very high ORR activity with a more positive half-wave potential of 0.843 V (vs. reversible hydrogen electrode) in 0.10 M KOH, comparing with the commercial 20 wt% Pt/C catalyst (0.807 V). Our methodology puts forwards a new sight to enhance the electrochemical catalytic performance of carbon composite materials through the synergistic effect of the atomic-metal and metal nanoparticles.

Covalent organic frameworks: an ideal platform for designing ordered materials and advanced applications

Covalent organic frameworks offer a molecular platform for integrating organic units into periodically ordered yet extended 2D and 3D polymers to create topologically well-defined polygonal lattices and built-in discrete micropores and/or mesopores.

Porphyrin-based frameworks for oxygen electrocatalysis and catalytic reduction of carbon dioxide

The recent progress made on porphyrin-based frameworks and their applications in energy-related conversion technologies (e.g., ORR, OER and CO₂RR) and storage technologies (e.g., Zn–air batteries).

Covalent organic frameworks (COFs) for electrochemical applications

Covalent organic frameworks are a class of extended crystalline organic materials that possess unique architectures with high surface areas and tuneable pore sizes. Since the first discovery of the topological frameworks in 2005, COFs have been applied as promising materials in diverse areas such as separation and purification, sensing or catalysis. Considering the need for renewable and clean energy production, many research efforts have recently focused on the application of porous materials for electrochemical energy storage and conversion. In this respect, considerable efforts have been devoted to the design and synthesis of COF-based materials for electrochemical applications, including electrodes and membranes for fuel cells, supercapacitors and batteries. This review article highlights the design principles and strategies for the synthesis of COFs with a special focus on their potential for electrochemical applications. Recently suggested hybrid COF materials or COFs with hierarchical porosity will be discussed, which can alleviate the most challenging drawback of COFs for these applications. Finally, the major challenges and future trends of COF materials in electrochemical applications are outlined.

Efficient Nitrate Reduction over Novel Covalent Ag-Salophen Polymer-Derived "Vein-Leaf-Apple"-like Ag@Carbon Structures

Efficient electrocatalysts for nitrate reduction reaction (NO₃^--RR) that could selectively transfer nitrate into harmless nitrogen are required for water-denitrification treatment. The most widely used electrodes for NO₃^--RR including noble metals, transition metals, and their alloys still face many challenges such as lower selectivity and efficiency, high cost, and easy corrosion properties. Metallic Ag with acceptable cost possesses strong corrosion resistance in electrolysis, but its activity is often incompetent for NO₃^--RR. In this work, Ag nanoparticles with a lower loading content (1.99 wt %) on a nitrogen-doped carbon support was successfully used as the robust electrocatalyst for NO₃^--RR in a Cl^--free neutral solution. This Ag@carbon catalyst exhibited an impressive electrochemical performance for NO₃^--RR, with a NO₃^--N conversion yield of 53% and a N₂-N selectivity of 97% at a low electrolysis overpotential (-0.29 V vs RHE). In particular, the prepared Ag@carbon showed better stability and no secondary Ag ion pollution in electrolysis. Its impressive electrocatalytic performance was attributed to the unique "vein-leaf-apple"-like Ag@carbon structures, prepared by thermal conversion of Ag-salophen polymers@CNTs. CNTs served as veins to enhance the electron transportation in electrocatalysts. Salophen polymer-derived mesoporous N-doped carbon plates acted as leaves to concentrate NO₃^- from the electrolyte. Like apples on trees, Ag nanoparticles of about 10-20 nm highly dispersed on carbons selectively converted NO₃^--N into N₂-N. It opens up a cost-acceptable and corrosion-resistant Ag-less electrocatalytic pathway for NO₃^--RR, and the special "vein-leaf-apple"-like Ag@carbon structure could enhance the electrolytic efficiency and N₂-N selectivity for NO₃^--RR.

Porous Organic Polymer-Derived Fe2P@N,P-Codoped Porous Carbon as Efficient Electrocatalysts for pH Universal ORR

A new porous organic polymer (CP-CMP) was designed and synthesized via the direct polymerization of pyrrole and hexakis(4-formyl-phenoxy)cyclotriphosphazene, skipping the tedious synthetic procedure of porphyrin-monomers containing special groups. This special porous organic polymer (POP) serves as an "all in one" precursor for C, N, P, and Fe. Direct carbonization of this special POP afforded Fe2P@N,P-codoped porous carbons with hierarchical pore structure and high graphitization. Finally, the optimal catalyst (CP-CMP-900) prepared by carbonization of CP-CMP at 900 °C exhibited high efficiency for oxygen electroreduction. Typically, CP-CMP-900 presented an oxygen reduction reaction half-wave potential (E 1/2) of 0.85, 0.73, and 0.65 V, respectively, in alkaline, neutral, and acidic media, close to those of commercial Pt/C in the same electrolyte (0.843, 0.71, and 0.74 V). Furthermore, it also displayed excellent methanol immunity and long-time stability in various electrolytes better than commercial Pt/C (20%).

A rationally designed bifunctional oxygen electrocatalyst based on Co2P nanoparticles for Zn–air batteries

A highly-efficient Co₂P-based bifunctional oxygen catalyst has been developed though an enhanced coupling with N,P co-doped carbon nanoparticles and 3D carbon networks, which exhibits better bi-catalytic performance than benchmark noble metal-based counterparts.

NiFeP nanoflakes composite with CoP on carbon cloth as flexible and durable electrocatalyst for efficient overall water splitting

High-performance and earth-abundant NiFeP is an excellent bifunctional catalyst for water splitting in acidic and alkaline environments, and NiFeP nanoflakes on CoP layer composite with a conductive carbon cloth (CC) substrate as the trunk-leaf flexible structure (NiFeP/CoP/CC) is prepared by direct high-temperature phosphorization. Overpotentials of only 96.38 and 78.80 mV are required in hydrogen evolution reaction in 1 M KOH and 0.5 M H₂SO₄, respectively, to generate an electrocatalytic current density of 10 mA cm^-2. A small Tafel slope of 70.67 and 63.21 mV per decade are also observed from NiFeP/CoP/CC revealing a Volmer-Heyrovsky mechanism in both media. The electrocatalyst also delivers excellent oxygen evolution reaction performance in the alkaline environment and long-term electrochemical durability for at least 24 h in electrolytes over a wide pH range. A device is assembled with two identical flexible ultrathin NiFeP/CoP/CC as both the anode and cathode in 1 M KOH driven by a set of 1.6 V solar cells. During 32 h of electrolysis, the results show that the current of our electrodes maintains 80% performance at a constant voltage of 1.7 V for 32 h, and the NiFeP/CoP/CC anodes and cathodes have large potential in industrial alkaline water splitting.

Pore Surface Engineering of Covalent Triazine Frameworks@MoS2 Electrocatalyst for the Hydrogen Evolution Reaction

Electrochemical water splitting is an important strategy for the mass production of hydrogen. Development of synthesizable catalysts has always been one of the biggest obstacles to replace platinum-group catalysts. In this work, a high quality crystal polymer covalent triazine framework [CTF; Brunauer-Emmett-Teller (BET) surface area of 1562.6 m²  g^-1 ] is synthesized and MoS₂ nanoparticles are grown in situ into/onto the 1 D channel arrays or the external surface for electrocatalysis [hydrogen evolution reaction (HER)] . The state-of-the-art CTFs@MoS₂ structure exhibits superior catalytic kinetics with an overpotential of 93 mV and Tafel slope of 43 mV dec^-1 , which is improved over most other reported analogous catalysts. The inherent π-conjugated crystal channels in CTFs provides a multifunctional support for electron transmission and mass diffusion during the hydrogen evolution process. Catalytic kinetics analysis shows that the HER performance is closely correlated to the hierarchical pore parameters and aggregated thickness of MoS₂ nanoparticles. This work provides an attractive and durable alternative to synthesize high activity and stable catalysts for HER.

Conjugated Macrocycle Polymer Nanoparticles with Alternating Pillarenes and Porphyrins as Struts and Cyclic Nodes

Conjugated macrocycle polymers (CMPs) integrated using the macrocyclic confinement effect make imposing restrictions feasible on the growth of metal nanoparticles with confined size and high dispersion. For a proof-of-concept exploration, a novel nanoscale CMP is reported, denoted as DMP[5]-TPP-CMP, comprising two representative types of macrocyclic compounds, i.e., pillararene and porphyrin, as alternating strut/node components in the skeleton. With abundant anchoring sites, CMP implanted with Pd nanoparticles (Pd@DMP[5]-TPP-CMP, Pd@CMP for short) is successfully obtained through a simple post-treatment, exhibiting remarkable catalytic activity in Suzuki-Miyaura coupling (SMC) and nitrophenol reduction. The as-prepared Pd@CMP material shows favorable performance in expediting the process of SMC with an appreciable yield even under mild conditions, as well as in facilitating the electron transfer process from borohydride to nitrophenol through metal-hydride complex to produce aminophenol with a very short transformation time of 3 min and superior apparent kinetic rate constant k _app of 1.9 × 10^-2 s^-1 , higher than most palladium supports. Significantly, this multifunctional Pd@CMP composite material not only enriches the family of CMPs, but also sheds light on the development of green catalysts with excellent stability and easy recyclability without deactivation.

Efficient Hydrogen Evolution Activity and Overall Water Splitting of Metallic Co4N Nanowires through Tunable d-Orbitals with Ultrafast Incorporation of FeOOH

Cobalt nitride electrocatalysts have been investigated and proven to show excellent oxygen evolution reaction activity owing to their excellent metallic properties, but their hydrogen evolution reaction (HER) properties are rarely reported because of their unsatisfactory molecular energy level, especially the d-orbital. Herein, taking Co₄N as a case study, we tune the d-orbital of metallic Co₄N nanowires via rapid formation of iron oxyhydroxide (FeOOH). Experimental analyses show that FeOOH@Co₄N/SSM exhibits excellent HER catalytic activity with considerable low onset overpotential (22 mV), small Tafel slope (34 mV dec^-1), and excellent stability at current densities ranging from 20 to 100 mA cm^-2. Additionally, theoretical assessments display that the hybridization of Co₄N with FeOOH is beneficiary for optimizing and promoting the free energy of H adsorption due to the tuning of d-orbital. An overall water-splitting device assembled based on bifunctional FeOOH@Co₄N/SSM delivers an onset potential of 1.48 V with excellent stability up to 4 days. This shows a new strategy for designing a high-performance water-splitting device based on cobalt-based electrocatalysts.

The Challenge of Achieving a High Density of Fe-Based Active Sites in a Highly Graphitic Carbon Matrix

As one of the most promising platinum group metal-free (PGM-free) catalysts for oxygen reduction reaction (ORR), Fe–N–C catalysts with a high density of FeNx moieties integrated in a highly graphitic carbon matrix with a proper porous structure have attracted extensive attention to combine the high activity, high stability and high accessibility of active sites. Herein, we investigated a ZnCl2/NaCl eutectic salts-assisted ionothermal carbonization method (ICM) to synthesize Fe–N–C catalysts with tailored porous structure, high specific surface area and a high degree of graphitization. However, it was found to be challenging to anchor a high density of FeNx sites onto highly graphitized carbon. Iron precursors with preexisting Fe–N coordination were required to form FeNx sites in the nitrogen-doped carbon with a high degree of graphitization, while individual Fe and N precursors led to a Fe–N–C catalyst with poor-ORR activity. This provides valuable insights into the synthesis-structure relationship. Moreover, the FeNx moieties were identified as the major active sites in acidic conditions, while both FeNx sites and Fe2O3 were found to be active in alkaline medium.

Yolk-Shell Fe/Fe4 N@Pd/C Magnetic Nanocomposite as an Efficient Recyclable ORR Electrocatalyst and SERS Substrate

A yolk-shell Fe/Fe₄ N@Pd/C (FFPC) nanocomposite is synthesized successfully by two facile steps: interfacial polymerization and annealing treatment. The concentration of Pd²⁺ is the key factor for the density of Pd nanoparticles (Pd NPs) embedded in the carbon shells, which plays a role in the oxygen reduction reaction (ORR) and surface-enhanced Raman scattering (SERS) properties. The ORR and SERS performances of FFPC nanocomposites under different concentrations of PdCl₂ are investigated. The optimal ORR performance exhibits that onset potential and tafel slope can reach 0.937 V (vs reversible hydrogen electrode (RHE)) and 74 mV dec^-1 , respectively, which is attributed to the synergistic effects of good electrical conductivity, large electrochemically active areas, and strong interfacial charge polarization. Off-axis electron holography reveals that interfacial charge polarization could facilitate the ORR of Pd NPs and defective carbon simultaneously and the shell with low density of Pd NPs is easier to form strong interfacial charge polarization. Moreover, FFPC-3 with maximum EF of 2.3 × 10⁵ results from more hot-spots, local positive charge centers to attract rhodamine 6G molecules, and magnetic cores. This work not only offers a recyclable multifunctional nanocomposite with excellent performance, but also has instructional implications for interfacial engineering for electrocatalysts design.

Sn(OH)x-assisted synthesis of mesoporous Mn-porphyrinic frameworks and their carbon derivatives for electrocatalysis

5,10,15,20-Tetrakis (4-aminophenyl) Mn-porphyrin and 2,4,6-trihydroxy-1,3,5-benzenetricarbaldehyde were combined into a new mesoporous organic framework by a Schiff-base-type reaction.

Bio-inspired chitosan-heme-vitamin B12-derived Fe–Co bimetallic-doped mesoporous carbons for efficiently electro-activating oxygen

Biomass-derived chitosan-heme-vitamin B₁₂ with definitive molecular structures was converted to bimetallic Fe–Co-doped mesoporous carbon for efficient oxygen electroreduction.

Controllable synthesis of carbon encapsulated iron phosphide nanoparticles for the chemoselective hydrogenation of aromatic nitroarenes to anilines

Iron phosphide nanoparticles encapsulated in a doped carbon matrix showed high activity and good selectivity in the hydrogenation of aromatic nitroarenes to anilines.