Core-Shell Composite Fibers for High-Performance Flexible Supercapacitor Electrodes

High-Performance Battery-Type Supercapacitors Based on Self-Oriented Growth of Nanorods/Nanospheres Composite Assembled on Self-Standing Conductive GO/CNF Frameworks

MnOx-based materials have limited capacity and poor conductivity over various voltages, hampering their potential for energy storage applications. This work proposes a novel approach to address these challenges. A self-oriented multiple-electronic structure of a 1D-MnO2-nanorod/2D-Mn2O3-nanosphere composite was assembled on 2D-graphene oxide nanosheet/1D-carbon nanofiber (GO/CNF) hybrids. Aided by K+ ions, the MnO2 nanorods were partially converted to Mn2O3 nanospheres, while the GO nanosheets were combined with CNF through hydrogen bonds resulting in a unique double binary 1D-2D mixed morphology of MnO2/Mn2O3-GO/CNF hybrid, having a novel mechanism of multiple Mn ion redox reactions facilitated by the interconnected 3D network. The morphology of the MnO2 nanorods was controlled by regulating the potassium ion content through a rinsing strategy. Interestingly, pure MnO2 nanorods undergo air-annealing to form a mixture of nanorods and nanospheres (MnO2/Mn2O3) with a distinct morphology indicating pseudocapacitive surface redox reactions involving Mn2+, Mn3+, and Mn4+. In the presence of the GO/CNF framework, the charge storage properties of the MnO2/Mn2O3-GO/CNF composite electrode show dominant battery-type behavior because of the unique mesoporous structure with a crumpled morphology that provides relatively large voids and cavities with smaller diffusion paths to facilitate the accumulation/intercalation of charges at the inner electroactive sites for the diffusion-controlled process. The corresponding specific capacity of 800 C g-1 or 222.2 mAh g-1 at 1 A g-1 and remarkable cycling stability (95%) over 5000 cycles at 3 A g-1 were considerably higher than those of the reported electrodes of similar materials. Moreover, a hybrid supercapacitor device is assembled using MnO2/Mn2O3-GO/CNF as the positive electrode and activated carbon as the negative electrode, which exhibits a superior maximum energy density (∼25 Wh kg-1) and maximum power density (∼4.0 kW kg-1). Therefore, the as-synthesized composite highlights the development of highly active low-cost materials for next-generation energy storage applications.

Peroxymonosulfate activation by Fe-Mn Co-doped biochar for carbamazepine degradation

Antibiotics in aquatic environments present a serious threat to the ecological environment and human health. Activation of carbon-catalyzed persulfate is a prospective approach for oxidizing antibiotics. There is a pressing need for inexpensive carbon catalysts of high quality. In this study, biochar (BC) modified by Fe, Mn and Fe@Mn was employed to activate peroxymonosulfate (PMS) to degrade carbamazepine (CBZ) in water. The surface of Fe@Mn BC had a dense, stalactite-like morphology comprising a square chassis that was elliptical. The catalyst Fe@Mn-BC possessed the optimal degradation effect (99%) on CBZ at 100 min. Electron paramagnetic resonance spectroscopy and the quenching spectrum suggested that ˙O2- and 1O2 contributed to CBZ degradation.

Synthesis and application of polypyrrole nanofibers: a review

State-of-the-art polypyrrole nanofiber-based nanoarchitectonics can be generally fabricated by electrospinning, interfacial polymerization and reactive template methods. Even though analogous nanofiber morphologies and nanofibrous network architectures can be obtained by these methods, the structural details and structural complexities may alter significantly as different synthesis methods are applied. For the electrospinning technique, on one hand, nanofibers can be directly obtained by spinning polypyrrole-containing dope solutions; on the other, the electrospun nanofiber mats can be used as templates to direct the nanofiber formation; a two-step fabrication process, including the electrospinning of polymer nanofiber mats and deposition of polypyrrole on the polymer nanofibers' surface, is generally employed. By tuning the electrospinning parameters, the composition, diameter, morphology, and alignment of the as-obtained electrospun nanofiber mat can be effectively controlled, which may allow the fabrication of polypyrrole nanofibers with sophisticated nanostructures and nanoarchitectures. Interfacial polymerization is capable of generating polypyrrole nanofibers without templates. It is speculated that the protonation and re-orientation of polypyrrole at the oil-water interface may decoil the polymer chains and transform them into more extended conformations, while the charged polymer chains more easily diffuse into the water phase and form a stable dispersion. Different from electrospinning, the reactive templates may drive the formation of polypyrrole nanofibers through either redox or protonation mechanisms. Nanofibers with different curvatures, compositions, and architectures can be obtained by using different types of reactive template in a simple, fast, environment-friendly and one-step manner. A wide range of applications have been demonstrated by the polypyrrole nanofiber-based nanoarchitectonics, including cell culture, tissue engineering, neural stimulation, energy storage, and organic electronics.

Electrons of d-orbital (Mn) and p-orbital (N) enhance the photocatalytic degradation of antibiotics by biochar while maintaining biocompatibility: A combined chemical and biological analysis

Photocatalytic oxidation technology holds promise for ideal advanced treatment of antibiotic wastewater. Single-atom catalysts (SACs) are a new hotspot in catalytic science, but the photochemical studies on the removal of antibiotics from water and biocompatibility after entering the environment are scarce. In this work, we prepared a single Mn atom immobilized on N-doped biochar (Mn@N-Biochar) by impregnation calcination method for enhancing photocatalytic degradation of sulfanilamide (SNM) in different types of various water systems. Compared with the original biochar, Mn@N-Biochar showed enhanced SNM degradation and TOC removal capacity. DFT calculation concluded that the electrons of d-orbital (Mn) and p-orbital (N) altered the electronic structure of biochar and enhanced the photoelectric performance. It was shown that Mn@N-Biochar caused negligible systemic inflammation and tissue damage when given orally in mice, and also did not alter cell death and ROS production in human lung, kidney, and liver cells, as compared with biochar. We are convinced that Mn@N-Biochar could enhance the photocatalytic degradation of antibiotics while maintaining biocompatibility, which could be a promising strategy for wastewater treatment.

Ni-Co-Mn hydrotalcite-derived hierarchically porous sulfide for hybrid supercapacitors

Ternary transition metal sulfides have attracted much attention due to their superior electrochemical properties. Nevertheless, it is difficult to commercialize sulfides due to their intrinsic properties such as dull reaction kinetics and an insufficient number of active sites. Herein, a self-supporting porous NiCoMnS sulfide (NiCoMnS/NF) arrayed on nickel foam (NF) with 3D honeycomb-like structure was designed and prepared via a hydrothermal and post-sulfidation process. It was found that the 3D hierarchically network architecture, constructed by nanosheets with abundant cavities, endowed NiCoMnS/NF with a high specific area and rich ion/electron-transport channels, which facilitated ion/electron transfer and Faradaic reaction kinetic. The optimal NiCoMnS/NF exhibited a markedly improved electrochemical performance due to the merits of complementary multi-composition and unique 3D network structure with multi-level "superhighways". Furthermore, the NiCoMnS//AC device fabricated with NiCoMnS/NF cathode and activated carbon (AC) anode delivered an excellent specific charge and exceptional energy density. This work offers a reference for designing the structure of electrode materials.

Synthesis of active-site rich molybdenum-doped manganese tungstate nanocubes for effective electrochemical sensing of the antiviral drug (COVID-19) nitazoxanide

Nitazoxanide (NTZ), a promising antiviral agent, is currently being tested in clinical trials as a potential treatment for novel coronavirus disease 2019 (COVID -19). This paper describes a one-pot hydrothermal synthesis to prepare molybdenum (Mo)-doped manganese tungstate nanocubes (Mo-MnWO4 NCs) for the electrochemical sensing of NTZ. The as-prepared Mo-MnWO4 NCs were characterized using various techniques such as XRD, Raman, FE-SEM, FE-TEM, and XPS to confirm the crystal structure, morphology, and elemental composition. The obtained results demonstrate that Mo doping on MnWO4 generates many vacancy sites, exhibiting remarkable electrochemical activity. The kinetic parameters of the electrode modified with Mo-MnWO4 NCs were calculated to be (Ks) 1.1 × 10-2 cm2 s-1 and (α) 0.97, respectively. Moreover, a novel electrochemical sensor using Mo-MnWO4 NCs was fabricated to detect NTZ, which is used as a primary antibiotic to control COVID-19. Under optimal conditions, the electrochemical reduction of NTZ was determined with a low detection limit of 3.7 nM for a linear range of 0.014-170.2 μM with a high sensitivity of 0.78 μA μM-1 cm-2 and negligible interference with other nitro group-containing drugs, cations, and anions. The electrochemical sensor was successfully used to detect NTZ in the blood serum and urine samples and achieved high recoveries in the range of 94-99.2% and 95.3-99.6%, respectively. This work opens a way to develop high-performance sensing materials by exploring the introduction of defect engineering on metal tungstates to detect drug molecules for practical applications.

In-situ compatibilized starch/polyacylonitrile composite fiber fabricated via dry-wet spinning technique

An in-situ compatibilized starch (St) and polyacrylonitrile (PAN) composite spinning solution was designed by preparing starch-graft-polyacrylonitrile (St-g-PAN) through graft copolymerizing acrylonitrile from soluble starch and using ammonium cerium nitrate (CAN) as initiator. As dimethyl sulfoxide (DMSO) was used as the solvent, St/St-g-PAN/PAN/DMSO spinning solution was prepared and St/St-g-PAN/PAN composite fibers were obtained by dry-wet spinning technique. The effects of air gap, coagulation bath, hot drawing and stretching, and thermal-setting process were studied in detail. Fourier transform infrared spectroscopy (FT-IR), solid state nuclear magnetic resonance (¹³C NMR), thermogravimetric analysis (TGA), X-ray diffraction analysis (XRD), and scanning electron microscopy (SEM) were used to characterize the structure and morphology of the copolymer and the fibers. Single fiber strength tester and sonic orientation instrument were performed to measure the fiber mechanical properties and orientation degrees. The results showed that as the grafting ratio ~150.0% and the reacting mixture containing St ~9.8%, St-g-PAN ~81.6%, and homo-PAN ~8.6% in DMSO solution with 6.0 wt% in concentration were used, the spinning parameters such as air gap ~35 mm, coagulation bath concentration ~70%, temperature ~25 °C, and positive stretching ~48%, hot drawing and stretching 6 times at 80 °C, thermal-setting at 90 °C for 3 h under constant length mode were met, composite fibers with breaking strength 3.41 cN·dtex^-1, breaking elongation 14.41%, sonic orientation factor 0.625, moisture recovery ratio 10.53% under standard condition (1 atm, 22 °C, and relative humidity 65%), and boiling water shrinkage ratio 9.60% were obtained. The as prepared composite fiber was better than common viscose fiber 2.11 cN·dtex^-1 and cotton fiber ~3.24 cN·dtex^-1 and expected to be used in the fields of medical gauze, bandage, protective clothing, et al. besides of common textiles. The in-situ compatibilization method can be applied in preparation of other composite polymer materials.

Structure-engineering of core-shell ZnCo2O4@NiO composites for high-performance asymmetric supercapacitors

The implementation of a structure-designed strategy to construct hierarchical architectures of multicomponent metal oxide-based electrode materials for energy storage devices is in the limelight. Herein, we report NiO nanoflakes impregnated on ZnCo2O4 nanorod arrays as ZnCo2O4@NiO core-shell structures on a flexible stainless-steel mesh substrate, fabricated by a simple, cost-effective and environmentally friendly reflux condensation method. The core-shell structure of ZnCo2O4@NiO is used as an electrode material in a supercapacitor as it provides a high specific surface area (134.79 m2 g-1) offering high electroactive sites for a redox reaction, reduces the electron and ion diffusion path, and promotes an efficient contact between the electroactive material and electrolyte. The binder-free ZnCo2O4@NiO electrode delivers a high specific capacitance of 882 F g-1 at 4 mA cm-2 current density and exhibits remarkable cycling stability (∼85% initial capacitance retention after 5000 charge-discharge cycles at 10 mA cm-2). The asymmetric supercapacitor device ZnCo2O4@NiO//rGO delivered a maximum energy density of 46.66 W h kg-1 at a power density of 800 W kg-1. The device exhibited 90.20% capacitance retention after 4000 cycles. These results indicate that the ZnCo2O4@NiO architecture electrode is a promising functional material for energy storage devices.

Fabrication of Fe3O4-incorporated MnO2 nanoflowers as electrodes for enhanced asymmetric supercapacitor performance

Manganese dioxide (MnO2) is considered a promising aspirant for energy storage materials on account of its higher theoretical capacitance along with low capital cost.

Designing flexible, smart and self-sustainable supercapacitors for portable/wearable electronics: from conductive polymers

The rapid development of portable/wearable electronics proposes new demands for energy storage devices, which are flexibility, smart functions and long-time outdoor operation. Supercapacitors (SCs) show great potential in portable/wearable applications, and the recently developed flexible, smart and self-sustainable supercapacitors greatly meet the above demands. In these supercapacitors, conductive polymers (CPs) are widely applied due to their high flexibility, conductivity, pseudo-capacitance, smart characteristics and moderate preparation conditions. Herein, we'd like to introduce the CP-based flexible, smart and self-sustainable supercapacitors for portable/wearable electronics. This review first summarizes the flexible SCs based on CPs and their composites with carbon materials and metal compounds. The smart supercapacitors, i.e., electrochromic, electrochemical actuated, stretchable, self-healing and stimuli-sensitive ones, are then presented. The self-sustainable SCs which integrate SC units with energy-harvesting units in one compact configuration are also introduced. The last section highlights some current challenges and future perspectives of this thriving field.

Organic/Inorganic Hybrid Fibers: Controllable Architectures for Electrochemical Energy Applications

Organic/inorganic hybrid fibers (OIHFs) are intriguing materials, possessing an intrinsic high specific surface area and flexibility coupled to unique anisotropic properties, diverse chemical compositions, and controllable hybrid architectures. During the last decade, advanced OIHFs with exceptional properties for electrochemical energy applications, including possessing interconnected networks, abundant active sites, and short ion diffusion length have emerged. Here, a comprehensive overview of the controllable architectures and electrochemical energy applications of OIHFs is presented. After a brief introduction, the controllable construction of OIHFs is described in detail through precise tailoring of the overall, interior, and interface structures. Additionally, several important electrochemical energy applications including rechargeable batteries (lithium-ion batteries, sodium-ion batteries, and lithium-sulfur batteries), supercapacitors (sandwich-shaped supercapacitors and fiber-shaped supercapacitors), and electrocatalysts (oxygen reduction reaction, oxygen evolution reaction, and hydrogen evolution reaction) are presented. The current state of the field and challenges are discussed, and a vision of the future directions to exploit OIHFs for electrochemical energy devices is provided.

Carbon coating on metal oxide materials for electrochemical energy storage

During the past decades, nano-structured metal oxide electrode materials have received growing attention due to their low development cost and high theoretical specific capacity, accordingly, quite a lot of metal oxide electrode materials are being used in electrochemical energy storage devices. However, the further development was limited by the relatively low electrical conductivity and the volume expansion during electrochemical reactions. Thus, many approaches have been proposed to obtain high-efficiency metal oxide electrode materials, such as designing nanomaterials with ideal morphology and high specific surface area, optimizing with carbon-based materials (such as graphene and glucose) to prepare nanocomposites, combining with conductive substrates to enhance the conductivity of electrodes, etc. Owning to the advantages of low cost and high chemical stability of carbon materials, core-shell structure formed by carbon-coated metal oxides is considered to be a promising solution to solve these problems. Therefore, this review mainly focuses on recent research advances in the field of carbon-coated metal oxides for energy storage, summarizing the advantages and disadvantages of common metal oxides and different types of carbon sources, and proposing methods to optimize the material properties in terms of structure and morphology, carbon layer thickness, coating method, specific surface area and pore size distribution, as well as improving electrical conductivity. In addition, the double or multi-layer coating strategy is also a reflection of the continuous development of carbon coating method. Hopefully, this rereview may provide a new direction for the renewal and development of future energy storage electrode materials.

High-performance reversible aqueous zinc-ion battery based on iron-doped alpha-manganese dioxide coated by polypyrrole

The development of zinc-ion storage cathode materials for aqueous zinc-ion batteries (AZIBs) is a necessary step for the construction of large-scale electrochemical energy conversion and storage devices. Iron-doped alpha-manganese dioxide (α-MnO₂) nanocomposites were achieved in this study via pre-intercalation of Fe³⁺ during the formation of α-MnO₂ crystals. A polypyrrole (PPy) granular layer was fabricated on the surface of α-MnO₂ using acid-catalyzed polymerization of pyrroles. The pre-intercalation of Fe³⁺ effectively enlarges the lattice spacing of α-MnO₂ and consequently decreases the hindrance for Zn²⁺ insertion/extraction in the iron-doped α-MnO₂ coated by PPy (Fe/α-MnO₂@PPy) composite. Meanwhile, the PPy buffer layer can ameliorate electron and ion conductivity and prevent dissolution of α-MnO₂during the charge/discharge process. This unique structure makes the Fe/α-MnO₂@PPy composite an efficient zinc-ion storage cathode for AZIBs. The targeted Fe/α-MnO₂@PPy cathode achieves superior performance with reversible specific capacity (270 mA h g^-1 at 100 mA g^-1) and exhibits highdiffusioncoefficientof 10^-10-10^-14 cm^-2 s^-1. Therefore, a feasible approach is implemented on advanced electrode materials using in AZIBs for practical applications.

Recent Studies on Supercapacitors with Next-Generation Structures

Supercapacitors have shown great potential as a possible solution to the increasing global demand for next-generation energy storage systems. Charge repositioning is based on physical or chemical mechanisms. There are three types of supercapacitors-the electrochemical double layer, the pseudocapacitor, and a hybrid of both. Each type is further subdivided according to the material used. Herein, a detailed overview of the working mechanism as well as a new method for capacitance enhancement are presented.

Three-dimensional Bi2O3/Ti microspheres as an advanced negative electrode for hybrid supercapacitors

Herein, we report a novel, low-temperature solvothermal method to grow 3D-Bi2O3 flower-like microspheres on Ti substrates as a binder-free negative electrode for supercapacitor applications. The Bi2O3/Ti electrode showed an areal capacitance of 1.65 F cm-2 at 4 mA cm-2. Moreover, the 3D-NiCo2O4||3D-Bi2O3 hybrid device delivered high energy and power densities of 31.17 μW h cm-2 and 7500 μW cm-2, respectively. The more optimal energy storage performance based on the strong adhesion of the current collector and self-assembled three-dimensional nanostructures permits efficient electron and ion transportation.

Manganese dioxide nanosheets: from preparation to biomedical applications

Advancements in nanotechnology and molecular biology have promoted the development of a diverse range of models to intervene in various disorders (from diagnosis to treatment and even theranostics). Manganese dioxide nanosheets (MnO₂ NSs), a typical two-dimensional (2D) transition metal oxide of nanomaterial that possesses unique structure and distinct properties have been employed in multiple disciplines in recent decades, especially in the field of biomedicine, including biocatalysis, fluorescence sensing, magnetic resonance imaging and cargo-loading functionality. A brief overview of the different synthetic methodologies for MnO₂ NSs and their state-of-the-art biomedical applications is presented below, as well as the challenges and future perspectives of MnO₂ NSs.

Toward fiber-, paper-, and foam-based flexible solid-state supercapacitors: electrode materials and device designs

Flexible solid-state supercapacitors possess promising safety performance and intrinsic fast charging-discharging properties, enabling them to accomplish the requirements of lightweight and multifunctional wearable electronics that have recently become fairly popular. Because electrode materials are the core component of flexible solid-state supercapacitors, we exhaustively review the recent investigations involving electrode materials that have used carbons, metal oxides, and conductive polymers. The principles and methods of optimizing and fabricating electrodes for use in flexible supercapacitors are discussed through a comprehensive analysis of the literature. In addition, we focused on three types of flexible solid-state supercapacitors (fiber-, paper-, and porous foam-based structures) to satisfy the requirements of flexible electronic devices. Further, we summarize the practical applications of flexible solid-state supercapacitors, including energy conversion/collection devices and energy storage/detection devices. Finally, we provide the developmental direction for flexible solid-state supercapacitors in the future.

Combining SWNT and Graphene in Polymer Nanofibers: A Route to Unique Carbon Precursors for Electrochemical Capacitor Electrodes

It is important to fabricate nanostructured architectures comprised of functional components for a wide variety of applications because precise structural control in the nanometer regime can yield unprecedented, fascinating properties. Owing to their well-defined microstructural characteristics, it has been popular to use carbon nanospecies, such as nanotubes and graphene, in fabricating nanocomposites and nanohybrids. Nevertheless, it still remains hard to control and manipulate nanospecies for specific applications, thus preventing their commercialization. Herein, first, we report unique one-dimensional nanoarchitectures with meso-/macropores, consisting of single-walled nanotubes (SWNTs), graphene, and polyacrylonitrile, in which poly(vinyl alcohol) was employed as a dispersing agent and sacrificial porogen. One-dimensional SWNTs and two-dimensional graphene pieces were combined in the confined interior space of electrospun nanofibers, which led to unique microstructural characteristics such as enhanced ordering of SWNTs, graphene pieces, and polymer chains in the nanofiber interior. Next, the SWNT/graphene-in-polymer nanofiber (SGPNF) structures were converted into carbonized products (SGCNFs) with effective porosity and tunable electrochemical properties. Similar to SGPNFs, the microstructural and electrical properties of the SGCNFs depended on the incorporated amount of SWNT and graphene. At higher SWNT content, the mesopore volume proportion and specific discharge capacitance of the SGCNFs increased by max. 63 and 598%, respectively. The SGCNFs showed strong potential as a high-performance electrode material for electrochemical capacitors (max. capacitance: nonactivated ∼390 F g^-1 and activated ∼750 F g^-1). Flexible, all solid-state capacitor cells based on SGCNFs were also successfully demonstrated as a model application. The SGCNFs can be further functionalized by various methods, which will impart attractive properties for extended applications.

Comprehensive Comparison between Nanocatalysts of Mn−Co/TiO2 and Mn−Fe/TiO2 for NO Catalytic Conversion: An Insight from Nanostructure, Performance, Kinetics, and Thermodynamics

The nanocatalysts of Mn−Co/TiO2 and Mn−Fe/TiO2 were synthesized by hydrothermal method and comprehensively compared from nanostructures, catalytic performance, kinetics, and thermodynamics. The physicochemical properties of the nanocatalysts were analyzed by N2 adsorption, transmission electron microscope (TEM), X-ray diffraction (XRD), H2-temperature-programmed reduction (TPR), NH3-temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). Based on the multiple characterizations performed on Mn−Co/TiO2 and Mn−Fe/TiO2 nanocatalysts, it can be confirmed that the catalytic properties were decidedly dependent on the phase compositions of the nanocatalysts. The Mn−Co/TiO2 sample presented superior structure characteristics than Mn−Fe/TiO2, with the increased surface area, the promoted active components distribution, the diminished crystallinity, and the reduced nanoparticle size. Meanwhile, the Mn4+/Mnn+ ratios in the Mn−Co/TiO2 nanocatalyst were higher than Mn−Fe/TiO2, which further confirmed the better oxidation ability and the larger amount of Lewis acid sites and Bronsted acid sites on the sample surface. Compared to Mn−Fe/TiO2 nanocatalyst, Mn−Co/TiO2 nanocatalyst displayed the preferable catalytic property with higher catalytic activity and stronger selectivity in the temperature range of 75–250 °C. The results of mechanism and kinetic study showed that both Eley-Rideal mechanism and Langmuir-Hinshelwood mechanism reactions contributed to selective catalytic reduction of NO with NH3 (NH3-SCR) over Mn−Fe/TiO2 and Mn−Co/TiO2 nanocatalysts. In this test condition, the NO conversion rate of Mn−Co/TiO2 nanocatalyst was always higher than that of Mn−Fe/TiO2. Furthermore, comparing the reaction between doping transition metal oxides and NH3, the order of temperature−Gibbs free energy under the same reaction temperature is as follows: Co3O4 < CoO < Fe2O3 < Fe3O4, which was exactly consistent with nanostructure characterization and NH3-SCR performance. Meanwhile, the activity difference of MnOx exhibited in reducibility properties and Ellingham Diagrams manifested the promotion effects of cobalt and iron dopings. Generally, it might offer a theoretical method to select superior doping metal oxides for NO conversion by comprehensive comparing the catalytic performance with the insight from nanostructure, catalytic performance, reaction kinetics, and thermodynamics.

High-Efficiency Catalytic Conversion of NOx by the Synergy of Nanocatalyst and Plasma: Effect of Mn-Based Bimetallic Active Species

Three typical Mn-based bimetallic nanocatalysts of Mn−Fe/TiO2, Mn−Co/TiO2, Mn−Ce/TiO2 were synthesized via the hydrothermal method to reveal the synergistic effects of dielectric barrier discharge (DBD) plasma and bimetallic nanocatalysts on NOx catalytic conversion. The plasma-catalyst hybrid catalysis was investigated compared with the catalytic effects of plasma alone and nanocatalyst alone. During the catalytic process of catalyst alone, the catalytic activities of all tested catalysts were lower than 20% at ambient temperature. While in the plasma-catalyst hybrid catalytic process, NOx conversion significantly improved with discharge energy enlarging. The maximum NOx conversion of about 99.5% achieved over Mn−Ce/TiO2 under discharge energy of 15 W·h/m3 at ambient temperature. The reaction temperature had an inhibiting effect on plasma-catalyst hybrid catalysis. Among these three Mn-based bimetallic nanocatalysts, Mn−Ce/TiO2 displayed the optimal catalytic property with higher catalytic activity and superior selectivity in the plasma-catalyst hybrid catalytic process. Furthermore, the physicochemical properties of these three typical Mn-based bimetallic nanocatalysts were analyzed by N2 adsorption, Transmission Electron Microscope (TEM), X-ray diffraction (XRD), H2-temperature-programmed reduction (TPR), NH3-temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). The multiple characterizations demonstrated that the plasma-catalyst hybrid catalytic performance was highly dependent on the phase compositions. Mn−Ce/TiO2 nanocatalyst presented the optimal structure characteristic among all tested samples, with the largest surface area, the minished particle sizes, the reduced crystallinity, and the increased active components distributions. In the meantime, the ratios of Mn4+/(Mn2+ + Mn3+ + Mn4+) in the Mn−Ce/TiO2 sample was the highest, which was beneficial to plasma-catalyst hybrid catalysis. Generally, it was verified that the plasma-catalyst hybrid catalytic process with the Mn-based bimetallic nanocatalysts was an effective approach for high-efficiency catalytic conversion of NOx, especially at ambient temperature.

Enhancing the Capacitive Performance of Carbonized Wood by Growing FeOOH Nanosheets and Poly(3,4-ethylenedioxythiophene) Coating

Carbonized wood (CW) achieved by the pyrolysis of various nature woods has received ever-increasing attentions in energy storage and conversion. However, its charge storage capacity is rather low because of its intrinsic ion adsorption mechanism. This work reports the enhanced capacitive performance of CW by growing electroactive FeOOH nanosheets and coating conductive poly(3,4-ethylenedioxythiophene) (PEDOT) network. Those vertically grown FeOOH nanosheets on both the external surface and inside the channel of CW offer more opened active sites for Faradaic reactions, whereas the porous and conductive PEDOT network significantly boosts the electrode conductivity, facilitates the ion transport, and protects the FeOOH sheets from destruction during cycling. Accordingly, the CW-FeOOH-PEDOT ternary electrodes exhibit 4.3 times higher volumetric capacitance than the CW electrode and remain at 90% capacitance upon increasing the current density from 10 to 50 mA cm^-2. Remarkably, the electrode maintains 103% of its capacitance even after 10 000 cycles of galvanostatic charge-discharge at 200 mA cm^-2. Besides these unique electrochemical behaviors, the CW-FeOOH-PEDOT also preserves good mechanical strength of the pristine CW electrode. This property allows easy processing of CW-based electrodes into robust energy storage device for practical applications.