Resorcin[4]arene-Based Microporous Metal-Organic Framework as an Efficient Catalyst for CO2 Cycloaddition with Epoxides and Highly Selective Luminescent Sensing of Cr2O72

Colorimetric detection of Fe2+ and Cr2O72- in environmental water samples based on dual-emitting RhB-embedded Zr-MOFs

Three dye-loaded tunable dual-emission colorimetric fluorescent probes RhB@UiO-66-Ph (R@U-P) were prepared by in-situ encapsulation method under solvothermal conditions. The resonance energy transfer between UiO-66-Ph and RhB made the dual emission of R@U-P easily tunable with the embedded dye content changing. The R@U-P composites achieved emission from purple light to red light, and served as probes to realize comparative detection of Fe3+, Fe2+ and Cr2O72- in water through colorimetric or quenching detection mode. Mechanism study indicates that the resonance energy transfer or electron transfer interactions between R@U-P composites and inorganic ions resulted in the relative changes of the two emission peaks and realized the selective detection of analytes. The preparation and application of R@U-P probes provide a promising strategy for the in-situ encapsulation dye to obtain two dual-emission composites for the comparative detection of Fe3+, Fe2+ and Cr2O72- in water samples.

Ratiometric Fluorescence Thermometry, Quantitative Gossypol Detection, and CO2 Chemical Fixation by a Multipurpose Europium (III) Metal-Organic Framework

A lanthanide-based molecular crystalline material endows metal-organic frameworks (MOFs) with many fascinating applications such as fluorescence detection and CO2 chemical fixation. Herein, we describe and study a multipurpose europium(III) MOF with the formula of {[Eu2(TATAB)2]·2.5H2O·2DMF}n (Eu-MOF) (where H3TATAB is 4,4',4″-((1,3,5-triazine-2,4,6-triyl)tris(azanediyl))tribenzoic acid ligand) for photoluminescence sensor matrix and CO2 chemical fixation. This Eu-MOF features 1D square channels along the c direction with a pore size of ca.14.07 Å × 14.07 Å, occupied by lattice water and DMF molecules. The obtained Eu-MOF can achieve simultaneous luminescence of the H3TATAB ligand and Eu3+ ions, which can be developed as the sensor matrix for ratiometric fluorescence thermometry. The luminescence of the Eu-MOF demonstrates an obvious color change from red to yellow as temperature rises from 303 to 373 K and the Eu-MOF has a satisfying relative sensitivity of 3.21% K-1 and a small temperature uncertainty of 0.0093 K at 333 K. Moreover, sensitive detection of gossypol was achieved with a quenching constant Ksv of 1.18 × 105 M-1 and a detection limit of 4.61 μM. A combination of the competitive absorption and photoinduced electron transfer caused by host-guest interactions and strengthened π-π packing effect synergistically between gossypol molecules and the Eu-MOF skeleton realizes the "turn-off" sensing of gossypol. Importantly, the nature of the Eu-MOF allows showing CO2 chemical fixation under mild conditions. Thus, the Eu-MOF can be utilized as a multipurpose material for ratiometric fluorescence thermometry, quantitative gossypol detection, and CO2 chemical fixation.

A robust and porous titanium metal-organic framework for gas adsorption, CO2 capture and conversion

A robust and porous titanium metal-organic framework (Ti-MOF; LCU-402) has been hydrothermally synthesized through combining a tetranuclear Ti2Ca2(μ3-O)2(μ2-H2O)1.3(H2O)4(O2C-)8 cluster and a tritopic 1,3,5-benzene(tris)benzoic (BTB) ligand. LCU-402 shows remarkable stability and permanent porosity for CO2, CH4, C2H2, C2H4, and C2H6 gas adsorption. Moreover, LCU-402 as a heterogeneous catalyst can smoothly convert CO2 under a simulated flue atmosphere into organic carbonate molecules by cycloaddition reactions of CO2 and epoxides, indicating that LCU-402 might be a promising catalyst candidate in practical applications. We are confident that the identification of a persistent titanium-oxo building unit would accelerate the development of new porous Ti-MOF materials.

Exploiting a Multi-Responsive Oxadiazole Moiety in One Three-Dimensional Metal-Organic Framework for Remedies to Three Environmental Issues

Multifunctional metal-organic frameworks (MOFs) rely on the properties of metal centers (nodes) and/or linkers (struts) for their diverse applications in the emerging field of research. Currently, there is a huge demand for MOF materials in the field of capture/fixation/sensing of air pollutants, harmful chemical effluents, and nuclear waste. However, it is a challenging task to utilize one MOF for providing remedies to all these issues. On the basis of our current research activities, we have identified that an oxadiazole moiety-a five-membered ring with two different heteroatoms (O and N)-in a carboxylate linker can be the key to generating such MOF materials for its (a) inherent polarizable nature and molecular docking ability and (b) photoluminescence properties. In this work, we report a 3D MOF {[Co₂(oxdz)₂(tpbn)(H₂O)₂]·4H₂O}_n (1), self-assembled at room temperature from a three-component reaction, with an oxadiazole moiety (where H₂oxdz = 4,4'-(1,3,4-oxadiazole-2,5-diyl)dibenzoic acid and tpbn = N,N',N,"N″'-tetrakis(2-pyridylmethyl)-1,4-diaminobutane). The inherent polarizable nature of the oxadiazole moiety in 1 has been efficiently exploited for (i) multimedia iodine capture and (ii) fixation of CO₂ under solvent-free and ambient conditions. On the other hand, the luminescent nature of the framework is found to be an efficient, highly preferred turn-on sensor for the ultra-fast detection of ketones with a limit as low as parts-per-trillion (mesitylene oxide: 447 ppt; cycloheptanone: 4.7 ppb; cyclohexanone: 17.2 ppb; acetylacetone: 18 ppb).

Topologically Driven Pore/Surface Engineering in a Recyclable Microporous Metal-Organic Vessel Decorated with Hydrogen-Bond Acceptors for Solvent-Free Heterogeneous Catalysis

The use of metal-organic frameworks (MOFs) comprising custom-designed linkers/ligands as efficient and recyclable heterogeneous catalysts is on the rise. However, the topologically driven bifunctional porous MOFs for showcasing a synergistic effect of two distinct activation pathways of substrates (e.g., involving hydrogen bonding and a Lewis acid) in multicomponent organic transformations are very challenging. In particular, the novelty of such studies lies in the proper pore and/or surface engineering in MOFs for bringing the substrates in close proximity to understand the mechanistic aspects at the molecular level. This work represents the topological design, solid-state structural characterization, and catalytic behavior of an oxadiazole tetracarboxylate-based microporous three-dimensional (3D) metal-organic framework (MOF), {[Zn₂(oxdia)(4,4'-bpy)₂]·8.5H₂O}_n (1), where the tetrapodal (4-connected) 5,5'-(1,3,4-oxadiazole-2,5-diyl)diisophthalate (oxdia^4-), the tetrahedral metal vertex (Zn(II)), and a 2-connected pillar linker 4,4'-bipyridine (4,4'-bpy) are unique in their roles for the formation, stability, and function. As a proof of concept, the efficient utilization of both the oxadiazole moiety with an ability to provide H-bond acceptors and the coordinatively unsaturated Zn(II) centers in 1 is demonstrated for the catalytic process of the one-pot multicomponent Biginelli reaction under mild conditions and without a solvent. The key steps of substrate binding with the oxadiazole moiety are ascertained by a fluorescence experiment, demonstrating a decrease or increase in the emission intensity upon interaction with the substrates. Furthermore, the inherent polarizability of the oxadiazole moiety is exploited for CO₂ capture and its size-selective chemical fixation to cyclic carbonates at room temperature and under solvent-free conditions. For both catalytic processes, the chemical stability, structural integrity, heterogeneity, versatility in terms of substrate scope, and mechanistic insights are discussed. Interestingly, the first catalytic process occurs on the surface, while the second reaction occurs inside the pore. This study opens new ways to catalyze different organic transformation reactions by utilizing this docking strategy to bring the multiple components close together by a microporous MOF.

Effect of Unsaturated Metal Site Modulation in Highly Stable Microporous Materials on CO2 Capture and Fixation

We have designed and synthesized two unprecedented microporous three-dimensional metal-organic frameworks, {[Cd₆(TPOM)₃(L)₆]·12DMF·3H₂O}_n (1) and {[Zn₂(TPOM)(L)₂]·2DMF·H₂O}_n (2), based on a flexible quadritopic ligand, tetrakis(4-pyridyloxymethylene)methane (TPOM), and a bent dicarboxylic acid, 4,4'-(dimethylsilanediyl)bis-benzoic acid (H₂L). The networks of 1 and 2 share a 4-c uninodal net NbO topology but exhibit different metal environments due to coordination preferences of Cd(II) and Zn(II). The Cd(II) center in 1 is six-coordinated, whereas the Zn(II) center in 2 is only four-coordinated, making the latter an unsaturated metal center. Such modulation of coordination atmosphere of metal centers in MOFs with the same topology is possible due to diverse binding of the carboxylate groups of L^2-. Both 1 and 2 have relatively high thermal stability and exhibit permanent porosity after the removal of guest solvent molecules based on variable temperature powder X-ray diffraction and gas adsorption analysis. These materials exhibit similar gas adsorption properties, especially highly selective CO₂ uptake/capture over other gases (N₂ and CH₄). However, because of the presence of an unsaturated Lewis acidic metal site, 2 acts as a very efficient heterogeneous catalyst toward the chemical conversion of CO₂ to cyclic carbonates under mild conditions, whereas 1 shows very less activity. This work provides experimental evidence for the postulate that an unsaturated metal site in MOFs enhances adsoprtion of CO₂ and promotes its conversion via the Lewis-acid catalysis.

The anionic Zn-MOF composed of 1D columnar SBUs for highly C2H2/CH4 selective adsorption, dye adsorption and fluorescence sensing

An anionic three-dimensional framework {(Me2NH2)2[Zn8(L)6(ad)4(μ4-O)]·10DMF·11H2O}(Zn-MOF, L2-=4,4'-(3-aminopyridine-2,5-diyl)dibenzoic acid, ad-=adeninate) with a column-layered structure was synthesized. Structural studies show that the Zn-MOF has octahedral cages [Zn8(ad)4(μ4-O)], adjacent cages are connected by O...

Metal–organic frameworks incorporating azobenzene-based ligands as a heterogeneous Lewis-acid catalyst for cyanosilylation of imines

Two novel MOFs were synthesized by the reaction of azobenzene-based ligands with Zn(NO3)2/CdCO3 and could both function as heterogeneous Lewis-acid catalysts towards cyanosilylation of imines.

Four MOFs with isomeric ligands as fluorescent probes for highly selective, sensitive and stable detection of antibiotics in water

Four complexes showed excellent discriminative probes for cefixime (CEF) and tetracycline (TEC) based on their sensitive fluorescence quenching. The PET and IFE effects resulted in high sensitivity and selectivity for the detection of CEF and TEC.

Two POM-based compounds containing Zn-capped Keggin anions as decent heterogeneous catalysts for sulfur oxidation and cycloaddition of CO2 reactions

Carbon dioxide (CO2) and the combustion of sulfide in gasoline are the main causes of air pollution. Great deal of attention has been committed to solving the problem and the...

Study on Selected Metal-Organic Framework-Based Catalysts for Cycloaddition Reaction of CO2 with Epoxides: A Highly Economic Solution for Carbon Capture and Utilization

The level of carbon dioxide in the atmosphere is growing rapidly due to fossil fuel combustion processes, heavy oil, coal, oil shelter, and exhausts from automobiles for energy generation, which lead to depletion of the ozone layer and consequently result in global warming. The realization of a carbon-neutral environment is the main focus of science and academic researchers of today. Several processes were employed to minimize carbon dioxide in the air, some of which include the utilization of non-fossil sources of energy like solar, nuclear, and biomass-based fuels. Consequently, these sources were reported to have a relatively high cost of production and maintenance. The applications of both homogeneous and heterogeneous processes in carbon capture and storage were investigated in recent years and the focus now is on the conversion of CO2 into useful chemicals and compounds. It was established that CO2 can undergo cycloaddition reaction with epoxides under the influence of special catalysts to give cyclic carbonates, which can be used as value-added chemicals at a different level of pharmaceutical and industrial applications. Among the various catalysts studied for this reaction, metal-organic frameworks are now on the frontline as a potential catalyst due to their special features and easy synthesis. Several metal-organic framework (MOF)-based catalysts were studied for their application in transforming CO2 to organic carbonates using epoxides. Here, we report some recent studies of porous MOF materials and an in-depth discussion of two repeatedly used metal-organic frameworks as a catalyst in the conversion of CO2 to organic carbonates.

Nanochannel {InZn}-Organic Framework with a High Catalytic Performance on CO2 Chemical Fixation and Deacetalization-Knoevenagel Condensation

The rare combination of In^III 5p and Zn^II 3d in the presence of a structure-oriented TDP^6- ligand led to a robust hybrid material of {(Me₂NH₂)[InZn(TDP)(OH₂)]·4DMF·4H₂O}_n (NUC-42) with the interlaced hierarchical nanochannels (hexagonal and cylindrical) shaped by six rows of undocumented [InZn(CO₂)₆(OH₂)] clusters, which represented the first 5p-3d nanochannel-based heterometallic metal-organic framework. With respect to the multifarious symbiotic Lewis acid-base and Brønsted acid sites in the high porous framework, the catalytic performance of activated NUC-42a upon CO₂ cycloaddition with styrene oxide was evaluated under solvent-free conditions with 1 atm of CO₂ pressure, which exhibited that the reaction could be well completed at ambient temperature within 48 h or at 60 °C within 4 h with high yield and selectivity. Moreover, because of the acidic function of metal sites and a central free pyridine in the TDP^6- ligand, deacetalization-Knoevenagel condensation of acetals and malononitrile could be efficiently facilitated by an activated sample of NUC-42a under lukewarm conditions.

Self-Assembly of Polyoxometalate-Resorcin[4]arene-Based Inorganic-Organic Complexes: Metal Ion Effects on the Electrochemical Performance of Lithium Ion Batteries

With their adjustable structures and diverse functions, polyoxometalate (POM)-resorcin[4]arene-based inorganic-organic complexes are a kind of potential multifunctional material. They have potential applications for lithium ion batteries (LIBs). However, the relationship between different coordinated metal ions and electrochemical performance has rarely been investigated. Here, three functionalized POM-resorcin[4]arene-based inorganic-organic materials, [Co₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅2 EtOH⋅4.5 H₂ O (1), [Ni₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅4 EtOH⋅13 H₂ O (2), and [Zn₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅2 EtOH⋅2 H₂ O (3), have been synthesized. Furthermore, to enhance the conductivities of these compounds, 1-3 were doped with reduced graphene oxide (RGO) to give composites 1@RGO-3@RGO, respectively. As anode materials for LIBs, 1@RGO-3@RGO can deliver very high discharge capacities (1445.9, 1285.0 and 1095.3 mAh g^-1 , respectively) in the initial run, and show discharge capacities of 898, 665 and 651 mAh g^-1 , respectively, at a current density of 0.1 A g^-1 over 100 runs. More importantly, the discharge capacities of 319, 283 and 329 mAh g^-1 were maintained for 1@RGO-3@RGO even after 400 cycles at large current density (1 A g^-1 ).

6s-3d {Ba3Zn4}-Organic Framework as an Effective Heterogeneous Catalyst for Chemical Fixation of CO2 and Knoevenagel Condensation Reaction

The exquisite combination of Ba²⁺ and Zn²⁺ with the aid of 2,4,6-tri(2,4-dicarboxyphenyl)pyridine (H₆TDP) under the condition of solvothermal self-assembly generates one highly robust [Ba₃Zn₄(CO₂)₁₂(HCO₂)₂(OH₂)₂]-organic framework of {[Ba₃Zn₄(TDP)₂(HCO₂)₂(OH₂)₂]·7DMF·4H₂O}_n (NUC-27), in which adjacent 2D layers are interlaced via hydrogen-bonding interactions to form a 3D skeleton with peapod-like channels and nano-caged voids. It is worth emphasizing that both Ba²⁺ and Zn²⁺ ions in NUC-27 display the extremely low coordination modes: hexa-coordinated [Ba(1)] and tetra-coordinated [Ba(2), Zn(1), and Zn(2)]. Furthermore, to the best our knowledge, NUC-27 is one scarcely reported 2D-based nanomaterial with an unprecedented Z-shaped hepta-nuclear heterometallic cluster of [Ba₃Zn₄(CO₂)₁₂(HCO₂)₂(OH₂)₂] as SBUs, which not only has plentiful low-coordinated open metal sites but also has the excellent physicochemical properties including omni-directional opening pores, ultrahigh porosity, larger specific surface area, and the coexistence of Lewis acid-base sites. Just as expected, thanks to its rich active metal sites and pyridine groups as strong Lewis acid-base roles, completely activated NUC-27 displays high catalytic efficiency on the chemical transformation of epoxides with CO₂ into cyclic carbonates under mild conditions and effectively accelerates the reaction process of Knoevenagel condensation.

Robust and Large-Area Calix[4]pyrrole-Based Nanofilms Enabled by Air/DMSO Interfacial Self-Assembly-Confined Synthesis

The modular construction of defect-free nanofilms with a large area remains a challenge. Herein, we present a scalable strategy for the preparation of calix[4]pyrrole (C[4]P)-based nanofilms through acryl hydrazone reaction conducted in a tetrahydrazide calix[4]pyrrole (CPTH)-based self-assembled layer at the air/DMSO interface. With this strategy, robust, regenerable, and defect-free nanofilms with an exceptionally large area (∼750 cm²) were constructed. The thickness and permeability of the film systems can be fine-tuned by varying the precursor concentration or by changing another building block. A typical nanofilm (C[4]P-TFB, ∼67 nm) depicted high water flux (39.9 L m^-2 h^-1 under 1 M Na₂SO₄), narrow molecular weight cut-off value (∼200 Da), and promising antifouling properties in the forward osmosis (FO) process. In addition, the nanofilms are stable over a wide pH range and tolerable to different organic solvents. Interestingly, the introduction of C[4]P endowed the nanofilms with both outstanding mechanical properties and unique group-selective separation capability, laying the foundation for wastewater treatment and pharmaceutical concentration.

One Robust Microporous TmIII-Organic Framework for Highly Catalytic Activity on Chemical CO2 Fixation and Knoevenagel Condensation

In terms of documented references, multifunctional MOFs with high catalytic performance could be constructed from the combination of metal cations and polycarboxyl-pyridine ligands, which could efficiently endow crystallized porous frameworks with the coexisting Lewis acid-base properties. Thus, by employing a ligand-directed synthetic strategy, the exquisite combination of wave-like inorganic chains of [Tm(CO₂)₃(OH₂)]_n and mononuclear units of [Tm(CO₂)₄(OH₂)₂] with the aid of the specially designed ligand of 2,6-bis(2,4-dicarboxylphenyl)-4-(4-carboxylphenyl)pyridine (H₅BDCP) generates one highly robust microporous framework of {(Me₂NH₂)[Tm₃(BDCP)₂)(H₂O)₃]·4DMF·H₂O}_n (simplified as NUC-25), which contains near-rectangular nanochannels and large solvent-residing voids. Furthermore, the activated state of NUC-25 with the removal of associated water molecules is a rarely reported bifunctional heterogeneous catalyst due to the coexistence of Lewis acid-base sites including 6-coordinated Tm³⁺ ions, uncoordinated carboxyl oxygen atoms, and N_pyridine atoms. Just as expected, NUC-25 exhibits greatly high catalytic activity for the cycloaddition reaction of epoxides with CO₂ into alkyl cyclic carbonates under bland solvent-free conditions, which should be ascribed to the polarity of nitrogen-containing pyridine heterocycles as Lewis base sites on the inner surface of nano-caged voids except for recognized Lewis acid sites of rare earth cations. Moreover, the excellent pore-size-dependent catalytic property for Knoevenagel condensation reactions confirms that NUC-25 can be viewed as a recyclable bifunctional heterogeneous catalyst. Therefore, these results strongly demonstrate that microporous MOFs assembled from pre-designed polycarboxyl-heterocyclic ligands display better catalytic performance not only for chemical CO₂ fixation but also for Knoevenagel condensation reactions.

Coordination polymers with embedded recognition sites: lessons from cyclotriveratrylene-type ligands

Coordination polymers with molecular recognition sites are assembled using cyclotriveratrylene ligands. Many show differential guest-spaces with host and lattice sites available, however common host–guest and self-inclusion motifs can block sites.

Removal of anionic hexavalent chromium and methyl orange pollutants by using imidazolium-based mesoporous poly(ionic liquid)s as efficient adsorbents in column

Poly(ionic liquid)s (PILs) are attractive for their various applications, but the use of porous PILs have rarely been reported in anionic pollutants removal via ion-exchange by column. Herein, we report a serial of crosslinked imidazolium-based mesoporous PILs with Cl^- and Br^- as anions for hexavalent chromium (Cr(VI)) and methyl orange (MO) removal. Among them, PDVIm-Cl-SCD, from the free-radical polymerization of a dicationic monomer (N,N'-methylene-bis(1-(3-vinylimidazolium)) chloride, DVIm-Cl) and further supercritical carbon dioxide drying (SCD), displayed a very high sorption capacity (328.2 mg g^-1 at 25 °C) and excellent utilization of adsorption sites (UOA, 86.2%) towards Cr(VI), and an unprecedentedly high sorption capacity (1615.0 mg g^-1 at 25 °C) with a UOA of 67.4% to MO. Moreover, PDVIm-Cl-SCD also exhibited a broad pH range, excellent regeneration and remarkable reusability. Regarding to Cr(VI) removal, the volume of saturated KCl aqueous used for regenerating the Cr(VI) saturated PDVIm-Cl-SCD column (7.5-9.5 mL) was much less than the volume of treated Cr(VI) solution (160-200 mL). For MO removal, the volume of saturated NaCl solution used for regenerating the MO saturated PDVIm-Cl-SCD column (10.5-13.5 mL) was also much less than the volume of treated MO solution (220-235 mL), implying the great potential of PDVIm-Cl-SCD in sustainable wastewater treatment.

Magnetic and Photoluminescent Sensors Based on Metal-Organic Frameworks Built up from 2-aminoisonicotinate

In this work, three isostructural metal-organic frameworks based on first row transition metal ions and 2-aminoisonicotinate (2ain) ligands, namely, {[M(μ-2ain)₂]·DMF}_n [M^II = Co (1), Ni (2), Zn (3)], are evaluated for their sensing capacity of various solvents and metal ions by monitoring the modulation of their magnetic and photoluminescence properties. The crystal structure consists of an open diamond-like topological 3D framework that leaves huge voids, which allows crystallizing two-fold interpenetrated architecture that still retains large porosity. Magnetic measurements performed on 1 reveal the occurrence of field-induced spin-glass behaviour characterized by a frequency-independent relaxation. Solvent-exchange experiments lead successfully to the replacement of lattice molecules by DMSO and MeOH, which, on its part, show dominating SIM behaviour with low blocking temperatures but substantially high energy barriers for the reversal of the magnetization. Photoluminescence studied at variable temperature on compound 3 show its capacity to provide bright blue emission under UV excitation, which proceeds through a ligand-centred charge transfer mechanism as confirmed by time-dependent DFT calculations. Turn-off and/or shift of the emission is observed for suspensions of 3 in different solvents and aqueous solutions containing metal ions.

Dual-emission carbon dots-stabilized copper nanoclusters for ratiometric and visual detection of Cr2O72- ions and Cd2+ ions

The pollution of heavy metal increases greatly accompanying by the development of industries. So, it is very important to build up a quick and reliable technique for detection of heavy metal ions. In this work, we developed a simple and convenient method for ratiometric and visual detection of Cr₂O₇^2- ions and Cd²⁺ ions. We utilized glutathione as raw material to prepare cyan-emitting carbon dots (GSH@CDs). The GSH@CDs were further used as the template to prepare carbon dots-stabilized copper nanoclusters (GSH@CDs-Cu NCs) that displayed two well-separated emission peaks respectively at 450 nm and 750 nm. The GSH@CDs-Cu NCs can be applied for the ratiometric and visual detection of Cr₂O₇^2- and Cd²⁺ ions based on the fluorescence quenching or enhancement of GSH@CDs-Cu NCs at 750 nm. A linear range of 2-40 μmol L^-1 with a detection limit of 0.9 μmol L^-1 for Cr₂O₇^2- ions, and a linear range of 0-20 μmol L^-1 with a detection limit of 0.6 μmol L^-1 for Cd²⁺ ions were achieved based on this method. The fluorescent test strips for Cr₂O₇^2- ions were successfully prepared based on GSH@CDs-Cu NCs. Moreover, the GSH@CDs-Cu NCs were successfully applied to determine Cr₂O₇^2- and Cd²⁺ ions in real samples with promising results.

Photoactive Metal-Organic Framework for the Reduction of Aryl Halides by the Synergistic Effect of Consecutive Photoinduced Electron-Transfer and Hydrogen-Atom-Transfer Processes

Consecutive photoinduced electron transfer (ConPET) has advantages on overcoming the current energetic limitation of visible-light photoredox catalysis for utilizing the energies of two photons in one catalytic cycle. A heterogeneous approach for radical chain reduction of various aryl bromides and chlorides without adding any cocatalyst is introduced by incorporating polyoxometalates (POMs) and amine catalysts into a naphthalenediimide (NDI)-based polymer. CoW-DPNDI-PYI exhibits high activity in the photocatalytic reduction of aryl halides by the synergistic effects of ConPET and hydrogen-atom-transfer (HAT) processes and an enzyme-mimicking CO₂ cycloaddition reaction. The ConPET process with N,N'-bis(4-pyridylmethyl)naphthalenediimide (DPNDI) facilitates effective solar energy conversion. POMs and amine catalysts, as efficient HAT catalysts and electron donors, improve the generation of the ConPET process. The success of this work demonstrates the great application of the synergistic effects of ConPET and HAT processes in heterogeneous photocatalysis C-H arylation.

Two tetranuclear Cd-based metal–organic frameworks for sensitive sensing of TNP/Fe3+ in aqueous media and gas adsorption

Two Cd-MOFs were solvothermally synthesized by mixed-ligand strategy. 1 has the largest adsorption selectivity for CO₂. Furthermore, 1 and 2 present sensitive sensing for TNP/Fe³⁺ in water or soil samples.

Two isostructural Ln3+-based heterometallic MOFs for the detection of nitro-aromatics and Cr2O72−

In/Eu-CBDA and In/Tb-CBDA can be used as potential chemical sensors for application in the detection of nitro-aromatics and Cr₂O₇²⁻.

Formation of CX Bonds in CO2 Chemical Fixation Catalyzed by Metal-Organic Frameworks

Transformation of CO₂ based on metal-organic framework (MOF) catalysts is becoming a hot research topic, not only because it will help to reduce greenhouse gas emission, but also because it will allow for the production of valuable chemicals. In addition, a large number of impressive products have been synthesized by utilizing CO₂ . In fact, it is the formation of new covalent bonds between CO₂ and substrate molecules that successfully result in CO₂ solidly inserting into the products, and only four types of new CX bonds, including CH, CC, CN, and CO bonds, are observed in this exploration. An overview of recent progress in constructing CX bonds for CO₂ conversion catalyzed by various MOF catalysts is provided. The catalytic mechanism of generating different CX bonds is further discussed according to both structural features of MOFs and the interactions among CO₂ , substrates, as well as MOFs. The future opportunities and challenges in this field are also tentatively covered.

Two zinc(ii) coordination polymers based on flexible co-ligands featuring assembly imparted sensing abilities for Cr2O7 2- and o-NP

Two new Zn(ii) coordination complexes, formulated as [Zn(opda)(pbib)] (1) and [Zn(ppda)(pbib)(H2O)] (2), (H2opda = 1,2-phenylenediacetic acid, H2ppda = 1,4-phenylene-diacetic acid, pbib = 1,4-bis(1-imidazoly)benzene), have been synthesized. The opda ligands extend a 1D chain containing (Zn-pbib) polymer chains into a 2D layer in 1. In 2, the ppda ligands link Zn(ii) atoms to form a 2D network, then the rigid bis(imidazole) ligands give rise to the 3D structure. The fluorescence property application and mechanisms of two complexes for detecting Cr2O7 2- and o-NP have been researched. For two complexes, the high quenching percentage in low concentration aqueous solution are 95.75% (Cr2O7 2-, 1), 95.28% (Cr2O7 2-, 2) and 97.56% (o-NP, 1), 96.59% (o-NP, 2). Compared with 2, complex 1 has higher quenching percentage, this could be because 1 is a 3D supramolecular with a large hole. The detection limits have been measured to be 2.992 × 10-7 M (Cr2O7 2-, 1), and 4.372 × 10-7 M (Cr2O7 2-, 2), 2.103 × 10-7 M (o-NP, 1), 1.862 × 10-7 M (o-NP, 2), respectively. The emissions of two complexes could be effectively and selectively quenched by o-NP and Cr2O7 2-, showing their potential as multi-responsive luminescent sensors.

Metal-Assembled, Resorcin[4]arene-Based Molecular Trimer for Efficient Removal of Toxic Dichromate Pollutants and Knoevenagel Condensation Reaction

Self-assembly of resorcin[4]arene-based coordination cages involving more than two resorcin[4]arenes poses significant challenges for the requirements of suitable functionalized resorcin[4]arene ligands and metals. Here, we report an unusual example of a metal-coordinated, resorcin[4]arene-based molecular trimer (1-NO₃), composed of three resorcin[4]arenes and three Cd(II) cations. In particular, 1-NO₃ features efficient and selective removal of environmentally toxic dichromate (Cr₂O₇^2-) anions. Moreover, the Knoevenagel condensation reaction was also explored by using 1-NO₃ as an efficient heterogeneous catalyst.