Bioinspired Catecholic Primers for Rigid and Ductile Dental Resin Composites

Microstructure and interaction in aluminum hydrides@polydopamine composites and interfacial improvement with GAP adhesive

The reduction of interfacial interaction and the deterioration of processing properties of aluminum hydrides (AlH3) is the main challenges preventing its practical application. Here, a simple and effective core-shell structure aluminum hydrides@polydopamine (AlH3@PDA) complex was constructed through in-situ polymerization. The evolution of element states on the surface of AlH3 conducted by X-ray photoelectron spectroscopy indicated the successful introduction of PDA to form the core@shell structure, the thickness of the PDA coated layer increased with the increasing PDA dosage from 0.1 to 1.6% in mass fraction, and the maximum of thickness is 50 nm in TEM testing. Py GC/MS results proved that the increase of dopamine concentration leads to higher proportions of self-assemble units, whereas lower dopamine concentrations favor higher levels of chemical bonded components. Regarding whether PDA is a covalent polymer or a noncovalent aggregate of some species, the formation of intermediates, such as dopaminechrome and 5,6-dihydroxyindole played an important role to coordination interaction with AlH3 in FTIR, Raman, and UV-Vis spectra testing. Compared with pure AlH3, the formation of organic PDA coating improved AlH3 heat resistance. The adhesion work with GAP adhesive was also improved from 107.02 J/m2 of pure AlH3 to 111.13 mJ/m2 of AlH3@PDA-5 complex. This paper provides well support for further practical application of AlH3 in solid propellants.

Modular Synthesis and Patterning of High-Stiffness Networks by Postpolymerization Functionalization with Iron–Catechol Complexes

Bioinspired iron-catechol cross-links have shown remarkable success in increasing the mechanical properties of polymer networks, in part due to clustering of Fe³⁺-catechol domains which act as secondary network reinforcing sites. We report a versatile synthetic procedure to prepare modular PEG-acrylate networks with independently tunable covalent bis(acrylate) and supramolecular Fe³⁺-catechol cross-linking. Initial control of network structure is achieved through radical polymerization and cross-linking, followed by postpolymerization incorporation of catechol units via quantitative active ester chemistry and subsequent complexation with iron salts. By tuning the ratio of each building block, dual cross-linked networks reinforced by clustered iron-catechol domains are prepared and exhibit a wide range of properties (Young's moduli up to ∼245 MPa), well beyond the values achieved through purely covalent cross-linking. This stepwise approach to mixed covalent and metal-ligand cross-linked networks also permits local patterning of PEG-based films through masking techniques forming distinct hard, soft, and gradient regions.

Multifunctional epoxy resin-based composites with excellent flexural strength and X-ray imaging capacity using micro/nano structured QF-Bi2SiO5 fillers

Composites have been widely applied in various industries and are beneficial in attaining complicated functionalities. Particularly, for dental fiber posts or orthopedic implants, the composites should have excellent mechanical properties and good imaging effects for visualization in vivo. The traditional method to improve mechanical strength and visibility by adding reinforcing fillers and radiopacifiers is complicated and has poor distributions and long production times. Hence, fabricating an integrated reinforced filler with radiopacity is of considerable economic and social significance. After ball-milling and sintering quartz fiber (QF) and bismuth trioxide (Bi₂O₃), a multifunctional filler (QF-Bi₂SiO₅) is fabricated to impart excellent flexural strengths and high X-ray imaging qualities to the composites. A composite made of epoxy resin (EP) and QF-Bi₂SiO₅ has a high bending strength (126.87 ± 6.78 MPa) and bending modulus (3649.31 ± 343.87 MPa), which are attributed to the tight mechanical interlock between EP and micro/nano structures of QF-Bi₂SiO₅. The QF-Bi₂SiO₅/EP composite shows good X-ray imaging quality owing to the Bi₂SiO₅ crystal. Furthermore, the mechanical and imaging performances of various composites with commercial fillers were compared with that of the QF-Bi₂SiO₅/EP composite. No filler was found that can perform both functions as well as QF-Bi₂SiO₅. Hence, the fabricated composites containing micro/nano structured QF-Bi₂SiO₅ fillers have the potential to be used in a variety of fields requiring mechanical strength and X-ray imaging capability.

Effect of Substituents in Mussel-inspired Surface Primers on their Oxidation and Priming Efficiency

Marine mussels contain an abundant catechol moiety, 3,4-dihydroxyphenylalanine (DOPA), in their interfacial foot proteins. DOPA contributes to both surface adhesion and bridging between the surface and overhead proteins (surface priming) by taking advantage of the unique redox properties of catechol. Inspired by the mussel surface priming mechanism, herein we synthesized a series of DOPA-mimetic analogs - a bifunctional group molecule, consisting of a catechol group and an acrylic group at the opposite ends. The surface primers with differently substituted (-COOH, -CH3 ) alkyl chains in the middle spacer were synthesized. Time-dependent oxidation and redox potentials of the surface primers were studied in an oxidizing environment to gain a better understanding of the mussel's redox chemistry. The thickness and degree of priming of the surface primers on silicon-based substrates were analyzed by ellipsometry and UV/Vis absorption spectroscopy. The post-reactivity of the acrylic groups of the primed layer was first visualized through a reaction with an acrylic group-reactive dye.

Synthesis and Characterization of Methacrylate-Functionalized Betulin Derivatives as Antibacterial Comonomer for Dental Restorative Resins

Secondary caries is the primary cause of composite restoration failures, resulting from marginal leakage and bacterial accumulation in the oral environment. Antibacterial dental composites, especially antibacterial monomers, have emerged as a promising strategy to inhibit secondary caries, which is pivotal to prolonging the lifespan of dental restorations. In this work, monomethacrylate- and dimethacrylate-functionalized betulin derivatives (M₁Bet and M₂Bet) were synthesized via an esterification reaction and served as antibacterial comonomers to develop novel dental resin formulations, in which M₁Bet and M₂Bet were incorporated to partially or completely replace bisphenol A glycerolate dimethacrylate (Bis-GMA). The control resin was a mixture based on Bis-GMA and tri(ethyleneglycol) dimethacrylate (TEGDMA) with a weight ratio of 50:50 (5B5T). The effect of the resin compositions and the chemical structures of M₁Bet and M₂Bet on the rheology behavior, optical property, polymerization kinetics, mechanical performance, cell viability, and antibacterial activity of dental resins were systematically investigated. Among all materials, the 1M₂Bet4B5T resin with 10 wt % substitution of Bis-GMA by M₂Bet exhibited comparable viscosity, higher light transmittance, improved degree of conversion, and mechanical properties compared with 5B5T. After incubation for 24 h, this optimal resin also possessed the best antibacterial activity against Streptococcus mutans, which had a significantly lower bacterial concentration (1.53 × 10⁹ CFU/mL) than 5B5T (9.03 × 10⁹ CFU/mL). Introducing betulin-based comonomers into dental resins is a potential strategy to develop antibacterial dental materials without sacrificing physical-mechanical properties.

In vitro evaluation of the anti-proteolytic and cross-linking effect of mussel-inspired monomer on the demineralized dentin matrix

OBJECTIVES

To evaluate the anti-proteolytic and cross-linking effect of N-(3,4-dihydroxyphenethyl)methacrylamide (DMA) on the demineralized dentin matrix in vitro.

METHODS

Four experimental solutions were selected: 50% ethanol/water solution (Control); 1, 5, and 10 mmol/L DMA dissolved in 50% ethanol/water solution. Sound human molars were sectioned to produce dentin beams with dimension of 1×1×6 mm. The dentin beams were demineralized with 10% phosphoric acid for 8 h to remove the apatite. The demineralized specimens were randomly separated into four groups and immersed in the four experimental solutions for 1 h. After the treatment, the ultimate tensile strength (UTS), loss of dry mass and the release of hydroxyproline by storing the treated specimens in 0.1 mg/mL collagenase solution for 24 h were assessed. The swelling ratio of another ten specimens from each group were evaluated. The interaction between DMA with dentin matrix was observed under Field Emission Scanning Electron Microscopy (FESEM). UTS data was analyzed by two-way ANOVA followed by Tukey test, and the other data was analyzed by one-way ANOVA followed by Tukey test (α = 0.05).

RESULTS

The two-way ANOVA factors, different solutions (p < 0.001), collagenase degradation (p < 0.001) and their interactions (p < 0.001) all significantly affected the UTS. The 10 mM DMA treatment significantly decreased the percentage of loss of dry mass, release of hydroxyproline and swelling ratio of demineralized dentin matrix compared to other treatment groups (p < 0.05). The FESEM observation depicted that with increasing concentration of DMA, the structure of dentin matrix was protected and the porosity within dentin collagen network was decreased.

CONCLUSIONS

The treatment by 10 mM DMA/ethanol solution for 1 hour is capable of enhancing the mechanical properties of demineralized dentin matrix against collagenase degradation and may be clinically useful to improve the durability of hybrid layer.

CLINICAL SIGNIFICANCE

The 10 mM DMA/ethanol primer may offer an alternative choice for dentists to strengthen the mechanical properties of demineralized dentin matrix and resist its degradation by collagenase.

A comprehensive nano-interpenetrating semiconducting photoresist toward all-photolithography organic electronics

Owing to high resolution, reliability, and industrial compatibility, all-photolithography is a promising strategy for industrial manufacture of organic electronics. However, it receives limited success due to the absence of a semiconducting photoresist with high patterning resolution, mobility, and performance stability against photolithography solution processes. Here, we develop a comprehensive semiconducting photoresist with nano-interpenetrating structure. After photolithography, nanostructured cross-linking networks interpenetrate with continuous phases of semiconducting polymers, enabling submicrometer patterning accuracy and compact molecular stacking with high thermodynamic stability. The mobility reaches the highest values of photocrosslinkable organic semiconductors and maintains almost 100% after soaking in developer and stripper for 1000 min. Owing to the comprehensive performance, all-photolithography is achieved, which fabricates organic inverters and high-density transistor arrays with densities up to 1.1 × 10⁵ units cm^-2 and 1 to 4 orders larger than conventional printing processes, opening up a new approach toward manufacturing highly integrated organic circuits and systems.

Size-controllable synthesis of dendritic porous silica as reinforcing fillers for dental composites

OBJECTIVE

Porous materials, especially porous silica particles are of great interest in different areas, and have applied in dental composites as inorganic fillers, due to their potential in constructing micromechanical interlocking at the filler-resin matrix interfaces. However, the facile and precise synthesis of hierarchical porous silica with graded sizes is still a great challenge.

METHODS

Here, we synthesized dendritic porous silica (DPS) with center-radial hierarchical pores and controllable size ranging from 75 to 1000nm by varying simultaneously the amounts of silica precursor and template in the microemulsion. A plausible nucleation-growth mechanism for the structural formation and the size tunability of the DPS particles was further put forward. These DPS particles were then formulated with Bis-GMA/TEGDMA resin.

RESULTS

The particle size and morphology influenced the mechanical properties of dental composites. Particularly, DPS-500 particles (average size: 500nm) exhibited the superior reinforcing effect, giving large improvements of 32.0, 96.7, 51.9, and 225.6% for flexural strength (S_F), flexural modulus (E_Y), compressive strength (S_C), and work of fracture (WOF), respectively, over the DPS-75 filled composite. All DPS filler sized exhibited similar degree of conversions and curing depths. Furthermore, the DPS-500 filled composite presented better cytocompatibility than commercial Z250 XT.

SIGNIFICANCE

The facile synthesis of DPS particles developed here and the understanding of the influence of the filler size and morphology on the composite properties provide a shortcut to design porous silica with precise size control and dental composites with superior performance. These DPS particles could also have promising applications in biomedicine, catalysis, adsorption, and cancer therapy.

The application of novel mussel-inspired compounds in dentistry

OBJECTIVE

To give a current review of the mechanism of mussel adhesion, the application of mussel-inspired compounds in dentistry and the challenges associated with clinical application.

METHODS

Inspired by the wet adhesion property of 3,4-dihydroxyphenol-l-alanine (Dopa) in mussel plaques, various chemical compounds have been synthesized to mimic the mussel as an adhesion model for medical applications. Similar to mussels in the marine environment, dental materials in the oral environment have to endure long-term water hydrolysis, mechanical stress and other chemical challenges. These challenges have influenced an increasing number of studies that are exploring the translation of mussel-inspired adhesion to clinical applications. Therefore, this review discusses the mussel adhesion chemistry and its related application in dentistry.

RESULTS

Mussel-inspired compounds have achieved relatively acceptable performances in various dental fields, including surface coating, metal ions chelation, dentin bonding and mucosal adhesion. However, two practical problems remain to be comprehensively addressed, namely the protection of catechol groups from oxidation, and the feasibility for clinical application.

SIGNIFICANCE

The mussel's wet adhesion ability has attracted much research interest in the dental field because of its properties of moisture-resistant adhesion and surface coating. Despite the emergence of several mussel-inspired compounds in recent years, a comprehensive and timely review of their applications in dentistry is lacking. Therefore, the current review hopes to provide valuable information around the application of mussel-inspired compounds in dentistry with their pros and cons discussed.

Catechol-thiol-based dental adhesive inspired by underwater mussel adhesion

The critical problem associated with the underwater mussel adhesive catechol-based 3,4-dihydroxy-L-phenylalanine (DOPA) is its sensitivity to oxidation. To overcome this problem, mussels underwent etching in the presence of acidic pH conditions (<3.0), and thiol chemistry was used to control the propensity of DOPA for oxidation. Similar strategies deployed by mussels are also actively utilized in dental adhesives which undergo etching in the presence of phosphoric acid derivatives to maximize the bonding strength and adapt thiol chemistries to minimize shrinkage stress. In view of the similarities between dental and underwater mussel adhesives, we employ in this study the strategy of mussel adhesion-the combination of DOPA and thiol chemistry with acid etching-to one of the most critical issues in dental adhesives, namely, the dentin bonding with zirconia. As a result, the adhesion bonding between zirconia and dentin, one of the most elusive problems in dentistry, has improved compared to the commercially available adhesive resin formulation. In addition, in view of the similar human oral and mussel adhesive environments, our findings will considerably contribute to the translation of the adhesive system inspired by mussels. STATEMENT OF SIGNIFICANCE: Mussels are effectively operated by creating an acidic environment when adhering with 3,4-dihydroxy-l-phenylalanine (DOPA)-thiol redox chemistry for underwater bonding. Similarly, in dental adhesives, phosphoric acid-based etching is used for dentin-bonding materials. In view of the similarity between dental adhesives and underwater mussel adhesives, the combination of DOPA and thiol chemistry with acid etching can be used to overcome one of the most critical issues in dentin medical adhesives. The proposed adhesion method produces high adhesion strengths compared to those currently used in dentin and zirconia adhesives. Here, we extend and evaluate dentin and zirconia dental adhesives by mixing with mussel (DOPA)-thiol redox chemistry and acid etching.

Enhancement performance of application mussel-biomimetic adhesive primer for dentin adhesives

In this study, a bioinspired adhesive primer monomer was prepared and evaluated for durable adhesion between dentin and composite resins.

A Study of 3D-Printable Reinforced Composite Resin: PMMA Modified with Silver Nanoparticles Loaded Cellulose Nanocrystal

With the rapid application of light-curing 3D printing technology, the demand for high-performance polymer resins is increasing. Existing light-curable resins often have drawbacks limiting their clinical applications. This study aims to develop a new type of polymethyl methacrylate (PMMA) composite resins with enhanced mechanical properties, high antibacterial activities and excellent biocompatibilities. A series of reinforced composite resins were prepared by mechanically mixing PMMA with modified cellulose nanocrystals (CNCs), which were coated with polydopamine and decorated by silver nanoparticles (AgNPs) via Tollen reaction. The morphology of CNCs-Ag was observed by transmission electron microscopy and the formation of AgNPs on CNCs was confirmed by X-Ray photoelectron spectroscopy analyses. Functional groups in PMMA-CNCs-Ag composites were verified by Fourier Transform infrared spectroscopy (FTIR) spectroscopy. The mechanical assessment and scanning electron microscopy analysis suggested that the evenly distributed CNCs-AgNPs composite effectively improve mechanical properties of PMMA resin. Cytotoxicity assay and antibacterial activity tests indicated excellent biocompatibility and high antibacterial activities. Furthermore, PMMA with CNCs-AgNPs of 0.1 wt.% (PMMA-CNCs-AgNPs-0.1) possessed the most desirable mechanical properties owing to the homogeneous distribution of AgNPs throughout the resin matrix. This specific composite resin can be used as a functional dental restoration material with potential of other medical applications.

Dental Adhesion Enhancement on Zirconia Inspired by Mussel’s Priming Strategy Using Catechol

Zirconia has recently become one of the most popular dental materials in prosthodontics being used in crowns, bridges, and implants. However, weak bonding strength of dental adhesives and resins to zirconia surface has been a grand challenge in dentistry, thus finding a better adhesion to zirconia is urgently required. Marine sessile organisms such as mussels use a unique priming strategy to produce a strong bonding to wet mineral surfaces; one of the distinctive chemical features in the mussel’s adhesive primer proteins is high catechol contents among others. In this study, we pursued a bioinspired adhesion strategy, using a synthetic catechol primer applied to dental zirconia surfaces to study the effect of catecholic priming to shear bond strength. Catechol priming provided a statistically significant enhancement (p < 0.05) in shear bond strength compared to the bonding strength without priming, and relatively stronger bonding than commercially available zirconia priming techniques. This new bioinspired dental priming approach can be an excellent addition to the practitioner’s toolkit to improve dental bonding to zirconia.