Cellulose Nanocrystal-Based Colored Thin Films for Colorimetric Detection of Aldehyde Gases

Polysaccharide Nanocrystals-Based Chiral Nematic Structures: From Self-Assembly Mechanisms, Regulation, to Applications

Chiral architectures, one of the key structural features of natural systems ranging from the nanoscale to macroscale, are an infinite source of inspiration for functional materials. Researchers have been, and still are, strongly pursuing the goal of constructing such structures with renewable and sustainable building blocks via simple and efficient strategies. With the merits of high sustainability, renewability, and the ability to self-assemble into chiral nematic structures in aqueous suspensions that can be preserved in the solid state, polysaccharide nanocrystals (PNs) including cellulose nanocrystals (CNCs) and chitin nanocrystals (ChNCs) offer opportunities to reach the target. We herein provide a comprehensive review that focuses on the development of CNCs and ChNCs for the use in advanced functional materials. First, the introduction of CNCs and ChNCs, and cellulose- and chitin-formed chiral nematic organizations in the natural world, are given. Then, the self-assembly process of such PNs and the factors influencing this process are comprehensively discussed. After that, we showcased the emerging applications of the self-assembled chiral nematic structures of CNCs and ChNCs. Finally, this review concludes with perspectives on the challenges and opportunities in this field.

Visual detection of aldehyde gases using a silver-loaded paper-based colorimetric sensor array

The small molecule aldehydes are volatile organic compounds (VOCs), possessing cytotoxicity and carcinogenicity. Long-term exposure can pose a serious threat to human health. Based on an in-situ reduction colorimetric method to generate silver nanoparticles and induce colorimetric response, we proposed a silver-loaded paper-based colorimetric sensor array for visually detecting and differentiating five relatively common trace small molecule aldehyde gases. The silver ions are immobilized onto a porous filter paper and stabilized by complexing agents of branched polyethyleneimine, ethylenediamine, and 1,6-diaminohexane, respectively. The as-fabricated sensor array expresses remarkable stability and capacity to resist humidity. The qualitative analysis reveals that the sensor array has excellent selectivity for aldehyde gases and displays remarkable anti-interference ability. The quantitative analysis indicates that the sensor array exhibits superior sensitivity for five aldehyde gases, with limits of detection (LODs) of 9.0 ppb for formaldehyde (FA), 3.1 ppm for acetaldehyde (AA), 3.5 ppm for propionaldehyde (PA), 23.8 ppb for glutaric dialdehyde (GD), and 71.5 ppb for hydroxy formaldehyde (HF), respectively. Importantly, these LODs are all comfortably below their respective permissible exposure limits. A unique colorimetric response fingerprint is observed for each analyte. Standard chemometric methods illustrate that the sensor array has excellent clustering capability for these aldehyde gases. Additionally, the sensor array's response is irreversible and possesses outstanding performance for cumulative monitoring. This colorimetric sensor array based on silver ions reduced to silver nanoparticles offers a novel detection method for the continuous, ultrasensitive, and visual detection of trace airborne pollutants.

Uncovering the Recent Progress of CNC-Derived Chirality Nanomaterials: Structure and Functions

Cellulose nanocrystal (CNC), as a renewable resource, with excellent mechanical performance, low thermal expansion coefficient, and unique optical performance, is becoming a novel candidate for the development of smart material. Herein, the recent progress of CNC-based chirality nanomaterials is uncovered, mainly covering structure regulations and function design. Undergoing a simple evaporation process, the cellulose nanorods can spontaneously assemble into chiral nematic films, accompanied by a vivid structural color. Various film structure-controlling strategies, including assembly means, physical modulation, additive engineering, surface modification, geometric structure regulation, and external field optimization, are summarized in this work. The intrinsic correlation between structure and performance is emphasized. Next, the applications of CNC-based nanomaterials is systematically reviewed. Layer-by-layer stacking structure and unique optical activity endow the nanomaterials with wide applications in the mineralization, bone regeneration, and synthesis of mesoporous materials. Besides, the vivid structural color broadens the functions in anti-counterfeiting engineering, synthesis of the shape-memory and self-healing materials. Finally, the challenges for the CNC-based nanomaterials are proposed.

Non-intrusive quality appraisal of differentiation-induced cardiovascular stem cells using E-Nose sensor technology

Stem cell technology holds immense potential for revolutionizing medicine, particularly in regenerative treatment for heart disease. The unique capacity of stem cells to differentiate into diverse cell types offers promise in repairing damaged tissues and implanting organs. Ensuring the quality of differentiated cells, essential for specific functions, demands in-depth analysis. However, this process consumes time and incurs substantial costs while invasive methods may alter stem cell features during differentiation and deplete cell numbers. To address these challenges, we propose a non-invasive strategy, using cellular respiration, to assess the quality of differentiation-induced stem cells, notably cardiovascular stem cells. This evaluation employs an electronic nose (E-Nose) and neural pattern separation (NPS). Our goal is to assess differentiation-induced cardiac stem cells (DICs) quality through E-Nose data analysis and compare it with standard commercial human cells (SCHCs). Sensitivity and specificity were evaluated by interacting SCHCs and DICs with the E-Nose, achieving over 90% classification accuracy. Employing selective combinations optimized by NPS, E-Nose successfully classified all six cell types. Consequently, the relative similarity among DICs like cardiomyocytes, endothelial cells with SCHCs was established relied on comparing response data from the E-Nose sensor without resorting to complex evaluations.

Effects of Ferric Ions on Cellulose Nanocrystalline-Based Chiral Nematic Film and Its Applications

Chiral nematic materials have been attracting attention in fields of advanced functional applications due to their unique iridescent colors and tunable helical structure. A precisely decreased pitch is of importance for construction and applications of chiral nematic materials; however, it remains a huge challenge. Herein, cellulose nanocrystal (CNC) is selected as a constructed matrix for chiral nematic films, and ferric chloride (FeCl3) is used as a modification agent. We investigate the effects of the ferric ion loads on the helical structure and optical characteristics of iridescent film. Subsequently, the influence of ferric ions on the assembly process of CNC liquid crystal and the regulation of the structure color of self-assembled monolayers are discussed. Therefore, the CNC/FeCl3 chiral nematic films showed a blueshifted structural color from orange to blue, which highlights a simple route to achieve the regulation of decreased pitch. Further, we have applied this CNC/FeCl3 chiral nematic film for benzene gas detection. The sensing performance shows that the CNC/FeCl3 chiral nematic film reacts to benzene gas, which can be merged into the nematic layer of the CNC and trigger the iron ions chelated on the CNC, consequently arousing the redshift of the reflected wavelength and the effective colorimetric transition. This CNC/FeCl3 chiral nematic film is anticipated to boost a new gas sensing mechanism for faster and more effective in-situ qualitative investigations.

Schiff base synergized with protonation of PEI to achieve smart antibacteria of nanocellulose packaging films

Microbial growth and reproduction can cause food spoilage. Developing the controlled release packaging films for food is an ideal solution. In this study, polyethyleneimine (PEI) was grafted to cellulose nanofibers (CNF) films by Schiff base, and when the CNF/PEI films were stimulated by pH, PEI released from the CNF/PEI films due to Schiff base hydrolysis, improving the antibacterial efficiency of PEI. Stimulated by acid with pH of 4, the PEI cumulative release rate of the CNF/PEI₈₀₀ and the CNF/PEI₂₀₀₀ films reached to 92.90 % and 87.28 %, respectively. At the same time, the amino groups of PEI protonated by obtaining H⁺, the charge density increased, and PEI molecular chains extended, enhancing the antibacterial activity of films. The Zeta potential value on the surface of the CNF/PEI film increased with the decrease of pH value. Schiff base synergized with protonation of PEI to achieve smart antibacteria of CNF packaging films. The antibacterial rates of the film against L. monocytogenes and E. coli were 94.7 % and 90.6 % at pH 4, but 29.5 % and 23.6 % at pH 8, respectively. The developed films also had good barrier properties of oxygen, visible light and mechanical properties, and had an attractive application prospect in food preservation to control release of antibacterial agent.

Recent advances in the hybridization of cellulose and semiconductors: Design, fabrication and emerging multidimensional applications: A review

Cellulose is a plentiful, biodegradable, renewable, and natural polymer in the world that can be widely utilized in the production of polymer nanocomposites. Cellulose is developed in nanomaterials owing to its remarkable inherent features of low density, non-toxicity, and affordability, as well as the amazing sample characteristics of strength and thermal stability. Recently, there has been a lot of interest in organic-inorganic composites because of their adaptable qualities. Cellulose and semiconductors have exciting properties, and new combinations of both materials may result in efficient functional hybrid composites with distinct properties. Lately, a huge study was reported on cellulose and semiconductor-based nanocomposites. In this review, we summarize the present research development in the preparation methods, structure, features, and possible applications of multifunctional cellulose and semiconductor-based nanocomposites. The cellulose/semiconductor based nanocomposites have massive potential applications in the areas of photodegradation of organic dyes, hydrogen production, metal removal, biomedical, and sensor applications. It is also assumed that this article will promote additional investigation and will establish innovative capabilities to enhance novel cellulose and semiconductor based nanocomposites with new and exciting applications.

Cellulose nanocrystals-based bio-composite optical materials for reversible colorimetric responsive films and coatings

Photonic materials with a tunable chiral nematic structure that can selectively reflect light dynamically are valuable for applications in smart responsive materials. Here, we prepared potential photonic composites with a chiral nematic structure by forming cellulose nanocrystals (CNCs) and waterborne polyurethane (WPU) composites with different compositions on different substrates by evaporation-induced self-assembly. With increasing WPU content, the reflected wavelength increased from 400 to 680 nm, which was mainly caused by the increase of the chiral nematic pitch. In addition, the mechanical properties were better for higher WPU content. WPU was sensitive to small amounts of moisture in ethanol owing to the swollen WPU after absorbing water will increase the helical pitch. The reversible red shift induced by moisture was approximately 100 nm. When wood was used as the substrate, the CNCs still self-assembled to form chiral nematic structures and the adhesion forces of the composites to the wood substrate were strong. By using MgCl₂ solution as an ink, invisible patterns can be written on the coating, which can be revealed temporarily by ethanol. In addition, the invisible pattern of photonic coating is rewritable. The easily prepared environmentally friendly photonic composite has great potential in sensors, anti-counterfeiting labels and smart decorative coatings.

Detection of gases and organic vapors by cellulose-based sensors

The growing interest in the development of cost-effective, straightforward, and rapid analytical systems has found cellulose-based materials, including cellulose derivatives, cellulose-based gels, nanocellulosic materials, and the corresponding (nano)cellulose-based composites, to be valuable platforms for sensor development. The present work presents recent advances in the development of cellulose-based sensors for the determination of volatile analytes and derivatives of analytical relevance. In particular, strategies described in the literature for the fabrication and modification of cellulose-based substrates with responsive materials are summarized. In addition, selected contributions reported in the field of paper-based volatile sensors are discussed, with a particular emphasis on quick response (QR) code paper-based platforms, intelligent films for food freshness monitoring, and sensor arrays for volatile discrimination purposes. Furthermore, analytical strategies devised for the determination of ionic species by in situ generation of volatile derivatives in both paper-based analytical devices (PADs) and microfluidic PADs will also be described.

Recent Developments and Implementations of Conductive Polymer-Based Flexible Devices in Sensing Applications

Flexible sensing devices have attracted significant attention for various applications, such as medical devices, environmental monitoring, and healthcare. Numerous materials have been used to fabricate flexible sensing devices and improve their sensing performance in terms of their electrical and mechanical properties. Among the studied materials, conductive polymers are promising candidates for next-generation flexible, stretchable, and wearable electronic devices because of their outstanding characteristics, such as flexibility, light weight, and non-toxicity. Understanding the interesting properties of conductive polymers and the solution-based deposition processes and patterning technologies used for conductive polymer device fabrication is necessary to develop appropriate and highly effective flexible sensors. The present review provides scientific evidence for promising strategies for fabricating conductive polymer-based flexible sensors. Specifically, the outstanding nature of the structures, conductivity, and synthesis methods of some of the main conductive polymers are discussed. Furthermore, conventional and innovative technologies for preparing conductive polymer thin films in flexible sensors are identified and evaluated, as are the potential applications of these sensors in environmental and human health monitoring.

Critical review and recent advances of 2D materials-Based gas sensors for food spoilage detection

Many people around the world are concerned about meat safety and quality, which has resulted in the ongoing advancement of packaged food technology. Since the emergence of graphene in 2004, the number of studies on layered two-dimensional materials (2DMs) for applications ranging from food packaging to meat quality monitoring has been expanding quickly. Recently, scientists have been working hard to develop a novel class of 2DMs that keep the good things about graphene but don't have zero bandgaps at room temperature. Much work has been done on layered transition metal dichalcogenides (TMDCs) like different metal sulfides and selenides for meat spoilage gas sensors. This review looks at (i) the main indicators of meat spoilage and (ii) the detection methods that can be used to find out if meat has been spoiled, such as chemiresistive, electrochemical, and optical methods. (iii) the role of 2DMs in meat spoilage detection and (iv) the emergence of advanced methods for selective classification of target analytes in meat/food spoilage detection in recent years. Thus, this review demonstrates the potential scope of 2DMs for developing intelligent sensor systems for food and meat spoilage detection with high viability, simplicity, cost-effectiveness, and other multipurpose tools.

Photonic Cellulose Films with Vivid Structural Colors: Fabrication and Selectively Chemical Response

Recent advances in structural-color cellulose nanocrystal (CNC) materials have been made toward chemical sensing applications; however, such materials lack sufficient color chroma for naked-eye observation, and their selective recognition to given chemicals as well as the corresponding mechanism has rarely been reported. Here, a dopamine-infiltration and post-polymerization approach is proposed to construct vivid structural-color composite films. The chiral nematic structure of CNC enables the structural coloration, while the strong light absorption of the polymeric co-phase, polydopamine (PDA) enhances the color chroma and visibility. By controlling the PDA amount, the composite films can detect organic solvents quantitatively and selectively via visible color changes. From the viewpoint of the compatibility and similitude principle, notably, a critical solubility parameter distance (R₀) between PDA and "active" solvents is defined with a three-dimensional Hansen solubility sphere; this well constructs a rule for the sensing selectivity of the chemochromic composite films. The findings pave the foundation for the design of colorimetric sensors with specifically testing objects.

Plant-Based Structures as an Opportunity to Engineer Optical Functions in Next-Generation Light Management

This review addresses the reconstruction of structural plant components (cellulose, lignin, and hemicelluloses) into materials displaying advanced optical properties. The strategies to isolate the main building blocks are discussed, and the effects of fibrillation, fibril alignment, densification, self-assembly, surface-patterning, and compositing are presented considering their role in engineering optical performance. Then, key elements that enable lignocellulosic to be translated into materials that present optical functionality, such as transparency, haze, reflectance, UV-blocking, luminescence, and structural colors, are described. Mapping the optical landscape that is accessible from lignocellulosics is shown as an essential step toward their utilization in smart devices. Advanced materials built from sustainable resources, including those obtained from industrial or agricultural side streams, demonstrate enormous promise in optoelectronics due to their potentially lower cost, while meeting or even exceeding current demands in performance. The requirements are summarized for the production and application of plant-based optically functional materials in different smart material applications and the review is concluded with a perspective about this active field of knowledge.

Multilayer photonic films based on interlocked chiral-nematic cellulose nanocrystals in starch/chitosan

In this study, a new approach to employ and control cellulose nanocrystal (CNC) chiral nematic structure as a biodegradable, intelligent material was investigated. Tuned CNC self-assembled films were interlocked between two layers of citric acid, cross-linked starch/chitosan (1:1) films through the solvent casting process. This method increased the mechanical properties of produced films and created a selective reflection band from UV to near-IR depending on the helical pitch of the chiral nematic CNC layer. The features of these intelligent films have potential for different applications, from UV protective packaging to biomedical uses. The water vapor permeability (WVP) of the produced films decreased considerably by adding a CNC layer into the cross-linked starch/chitosan structure. Also, the WVP was different for the different helical pitches of the CNC layer. The starch/chitosan (outer layer) also showed a remarkable antibacterial property against E. coli, P. fluorescens, S. Enteritidis, and S. aureus which could be useful for biomedical applications or antibacterial packaging.

A Review on the Role and Performance of Cellulose Nanomaterials in Sensors

Sensors and biosensors play a key role as an analytical tool for the rapid, reliable, and early diagnosis of human diseases. Such devices can also be employed for monitoring environmental pollutants in air and water in an expedited way. More recently, nanomaterials have been proposed as an alternative in sensor fabrication to achieve gains in performance in terms of sensitivity, selectivity, and portability. In this direction, the use of cellulose nanomaterials (CNM), such as cellulose nanofibrils (CNF), cellulose nanocrystals (CNC), and bacterial cellulose (BC), has experienced rapid growth in the fabrication of varied types of sensors. The advantageous properties are related to the supramolecular structures that form the distinct CNM, their biocompatibility, and highly reactive functional groups that enable surface functionalization. The CNM can be applied as hydrogels and xerogels, thin films, nanopapers and other structures interesting for sensor design. Besides, CNM can be combined with other materials (e.g., nanoparticles, enzymes, carbon nanomaterials, etc.) and varied substrates to advanced sensors and biosensors fabrication. This review explores recent advances on CNM and composites applied in the fabrication of optical, electrical, electrochemical, and piezoelectric sensors for detecting analytes ranging from environmental pollutants to human physiological parameters. Emphasis is given to how cellulose nanomaterials can contribute to enhance the performance of varied sensors as well as expand novel sensing applications, which could not be easily achieved using standard materials. Finally, challenges and future trends on the use of cellulose-based materials in sensors and biosensors are also discussed.

Fluorescence Sensing of Formaldehyde and Acetaldehyde Based on Responsive Inverse Opal Photonic Crystals: A Multiple-Application Detection Platform

Formaldehyde (FA) and acetaldehyde (AcH) used as common chemicals in many fields are carcinogenic. The presently reported detection methods usually need expensive instruments, professional technicians, and time-consuming processes, and the detection sensitivity still needs further improvement. Herein, we report a highly effective fluorescence (FL) sensing film for FA and AcH based on naphthalimide derivative-infiltrated responsive SiO₂ inverse opal photonic crystals (PCs), establishing a practically multiple-application detection platform for FA and AcH in air, aquatic products, and living cells. Nucleophilic addition products between the amine group of the naphthalimide derivative and aldehydes emit strong FL at ∼550 nm, realizing selective FL detection for FA and AcH. The emitted FL can be enhanced remarkably because of the slow photon effect of PCs, in which the FL wavelength is located at the stopband edge of PCs. A highly sensitive detection for FA and AcH with limits of detection of 10.6 and 7.3 nM, respectively, is achieved, increasing 3 orders of magnitude compared with that in the solution system. Additionally, the interconnected three-dimensional microporous inverse opal structure endows the sensor with a rapid response within 1 min. Furthermore, the as-prepared PC sensor can be reused by simple washing in an acidic aqueous solution. The sensing system can be used as a FL multi-detection platform for FA and AcH in air, aqueous solution, and living cells. This FL sensing approach based on small organic molecule-functionalized PCs is universally available to develop various sensors for target analytes by designing new functional organic compounds.

Applications of Cellulose Nanomaterials in Stimuli-Responsive Optics

As one of the most abundant biopolymers, cellulose has been a basic but essential building block of human society, with its use dating back thousands of years. With recent developments in nanotechnology and increasing environmental concerns, cellulose-based nanomaterials are now gaining attention as promising green material candidates for many high-value applications as a result of their biocompatibility and advantageous physical and chemical properties. In particular, cellulose nanocrystals are notable for their optical properties that can respond to various environmental stimuli as a result of the unique chiral nematic structure of the material. Compositing cellulosic materials with functional polymers, small molecules, and other nanomaterials can further stabilize and amplify these responsive optical signals and introduce multiple new functionalities. On the basis of these capabilities, many advanced applications of cellulose nanomaterials have been proposed, including chemical sensors, photonic papers, decorative coatings, data security, and smart textiles. In this review, we discuss and summarize recent advances in this emerging field of stimuli-responsive optics based on cellulose nanomaterials.

Understanding the Self-Assembly of Cellulose Nanocrystals-Toward Chiral Photonic Materials

Over millions of years, animals and plants have evolved complex molecules and structures that endow them with vibrant colors. Among the sources of natural coloration, structural color is prominent in insects, bird feathers, snake skin, plants, and other organisms, where the color arises from the interaction of light with nanoscale features rather than absorption from a pigment. Cellulose nanocrystals (CNCs) are a biorenewable resource that spontaneously organize into chiral nematic liquid crystals having a hierarchical structure that resembles the Bouligand structure of arthropod shells. The periodic, chiral nematic organization of CNC films leads them to diffract light, making them appear iridescent. Over the past two decades, there have been many advances to develop the photonic properties of CNCs for applications ranging from cosmetics to sensors. Here, the origin of color in CNCs, the control of photonic properties of CNC films, the development of new composite materials of CNCs that can yield flexible photonic structures, and the future challenges in this field are discussed. In particular, recent efforts to make flexible photonic materials using CNCs are highlighted.

Flexible and Stretchable Temperature Sensors Fabricated Using Solution-Processable Conductive Polymer Composites

Accurate monitoring of physiological temperatures is important for the diagnosis and tracking of various medical conditions. This work presents the design, fabrication, and characterization of temperature sensors using conductive polymer composites (CPCs) patterned on both flexible and stretchable substrates through both drop coating and direct ink writing (DIW). These composites were formed using a high melting point biopolymer polyhydroxybutyrate (PHB) as the matrix and the graphenic nanomaterial reduced graphene oxide (rGO) as the nanofiller (from 3 to 12 wt%), resulting in a material that exhibits a temperature-dependent resistivity. At room temperature the composites exhibited electrical percolation behavior. Around the percolation threshold, both the carrier concentration and mobility were found to increase sharply. Sensors were fabricated by drop-coating PHB-rGO composites onto ink-jet printed silver electrodes. The temperature coefficient of resistance was determined to be 0.018 /°C for pressed rGO powders and 0.008 /°C for the 3 wt% samples (the highest responsivity of all composites). Composites were found to have good selectivity to temperature with respect to pressure and moisture. Thermal mapping was demonstrated using 6 × 7 arrays of sensing elements. Stretchable devices with a meandering pattern were fabricated using DIW, demonstrating the potential for these materials in healthcare monitoring devices.

Current State of Applications of Nanocellulose in Flexible Energy and Electronic Devices

Novel and unique applications of nanocellulose are largely driven by the functional attributes governed by its structural and physicochemical features including excellent mechanical properties and biocompatibility. In recent years, thousands of groundbreaking works have helped in the development of targeted functional nanocellulose for conductive, optical, luminescent materials, and other applications. The growing demand for sustainable and renewable materials has led to the rapid development of greener methods for the design and fabrication of high-performance green nanomaterials with multiple features, and consequently new challenges and opportunities. The present review article discusses historical developments, various fabrication and functionalization methods, the current stage, and the prospects of flexible energy and hybrid electronics based on nanocellulose.

Dual Response of Photonic Films with Chiral Nematic Cellulose Nanocrystals: Humidity and Formaldehyde

Manipulating functional stimuli-responsive materials has been a hot topic in the research of smart sensors and anticounterfeiting encryption. Here, a novel functional chiral nematic cellulose nanocrystal (CNC) film showing dual responsiveness to humidity and formaldehyde gas was fabricated. The chiral nematic CNC iridescent film could respond to environmental humidity and formaldehyde gas changes by reversible motion. Interestingly, the humidity sensitivity of the CNC iridescent film could be gated by exposing the film to formaldehyde gas. At the same time, the formaldehyde-responsive behavior is strongly affected by the relative humidity (RH), and the response range could be tuned by changing the RH over a wide range. Importantly, the formaldehyde-induced color change could be altered from invisible to visible by the naked eye when the film was exposed to a humid environment. The mechanism of this dual response of the CNC iridescent film is ascribed to the synergistic effect of cooperation and competition between water and formaldehyde molecules by constructing physical cross-linking networks by hydrogen bonds among water, formaldehyde, and CNCs. Furthermore, the "RH-concentration of formaldehyde gas-color" ternary colorimetric system was simulated, which is thought to endow the CNC iridescent film with great potential to act as a sensor in the convenient visible detection of gaseous formaldehyde. Furthermore, this work provided a promising strategy to design multi-gas-sensitive devices with convenient detection, good stability, and excellent reversibility.

From Equilibrium Liquid Crystal Formation and Kinetic Arrest to Photonic Bandgap Films Using Suspensions of Cellulose Nanocrystals

The lyotropic cholesteric liquid crystal phase developed by suspensions of cellulose nanocrystals (CNCs) has come increasingly into focus from numerous directions over the last few years. In part, this is because CNC suspensions are sustainably produced aqueous suspensions of a fully bio-derived nanomaterial with attractive properties. Equally important is the interesting and useful behavior exhibited by solid CNC films, created by drying a cholesteric-forming suspension. However, the pathway along which these films are realized, starting from a CNC suspension that may have low enough concentration to be fully isotropic, is more complex than often appreciated, leading to reproducibility problems and confusion. Addressing a broad audience of physicists, chemists, materials scientists and engineers, this Review focuses primarily on the physics and physical chemistry of CNC suspensions and the process of drying them. The ambition is to explain rather than to repeat, hence we spend more time than usual on the meanings and relevance of the key colloid and liquid crystal science concepts that must be mastered in order to understand the behavior of CNC suspensions, and we present some interesting analyses, arguments and data for the first time. We go through the development of cholesteric nuclei (tactoids) from the isotropic phase and their potential impact on the final dry films; the spontaneous CNC fractionation that takes place in the phase coexistence window; the kinetic arrest that sets in when the CNC mass fraction reaches ∼10 wt.%, preserving the cholesteric helical order until the film has dried; the ’coffee-ring effect’ active prior to kinetic arrest, often ruining the uniformity in the produced films; and the compression of the helix during the final water evaporation, giving rise to visible structural color in the films.

Construction of heterostructured g-C3N4/ZnO/cellulose and its antibacterial activity: experimental and theoretical investigations

A ternary composite is fabricated via a facile method. The chemically interfacial coupling is revealed, which improves the spatial separation efficiency of photogenerated carriers and leads to superior good antibacterial activity.

Humidity and Heat Dual Response Cellulose Nanocrystals/Poly(N-Isopropylacrylamide) Composite Films with Cyclic Performance

It has been widely reported that cellulose nanocrystals (CNCs) demonstrate a special structural color, which stems from chiral nematic domains. Herein, the humidity and heat dual response nanocomposite films with multilayered helical structure were prepared by self-assembling of CNCs and hydrazone groups modified poly(N-isopropylacrylamide) (PNIPAM) copolymers. Furthermore, glutaraldehyde was involved to act as a chemical linker to improve cyclic stability by forming acylhydrazone bonds. The structural color of the films could be easily regulated by humidity, heat, or the content of modified PNIPAM copolymers. The absorption of water in higher humidity led to volume expansion of the resin, resulting in a red shift for up to 145 nm. In contrast, the resin shrank under the temperature above the lower critical solution temperature of PNIPAM, leading to a blue shift for up to 87 nm. It was notable that the change of color can be easily captured by the naked eyes. Moreover, the films exhibited excellent stability and cyclicity in response to either vapor or liquid water due to the chemical linking between CNCs and resins. The as-prepared CNCs/PNIPAM nanocomposite films with humidity or heat responsibilities are promising in stimuli-responsive sensors, printing industry, surface decorations, and so forth.

Perspectives in Liquid-Crystal-Aided Nanotechnology and Nanoscience

The research field of liquid crystals and their applications is recently changing from being largely focused on display applications and optical shutter elements in various fields, to quite novel and diverse applications in the area of nanotechnology and nanoscience. Functional nanoparticles have recently been used to a significant extent to modify the physical properties of liquid crystals by the addition of ferroelectric and magnetic particles of different shapes, such as arbitrary and spherical, rods, wires and discs. Also, particles influencing optical properties are increasingly popular, such as quantum dots, plasmonic, semiconductors and metamaterials. The self-organization of liquid crystals is exploited to order templates and orient nanoparticles. Similarly, nanoparticles such as rods, nanotubes and graphene oxide are shown to form lyotropic liquid crystal phases in the presence of isotropic host solvents. These effects lead to a wealth of novel applications, many of which will be reviewed in this publication.