Influence of Mussel-Derived Bioactive BMP-2-Decorated PLA on MSC Behavior in Vitro and Verification with Osteogenicity at Ectopic Sites in Vivo

Bio-inspired aFGF modification functionalized piezoelectric chitosan films for promoting scald wound healing

The application of acidic fibroblast growth factor (aFGF) has shown great potential in the treatment of scald or burn wounds with high morbidity and mortality, especially in promoting the repair of deep partial-thickness wounds. However, its short half-life and instability in vivo do pose challenges for clinical application. Herein, two kinds of bio-inspired modified piezoelectric chitosan (CS) films, namely heparin-coated CS film (HCS) and polydopamine-coated CS film (DCS), are facially fabricated and adopted as controlled-release platforms for local delivery of aFGF. Polydopamine or heparin layers serve as a bridge grafting on chitosan films, facilitating the loading of aFGF and enabling controlled release of aFGF from the piezoelectric film through intermolecular interactions. Additionally, these layers enhance the hydrophilicity and antibacterial properties of the bare CS film due to their inherent biological activities. Furthermore, the polydopamine coating imparts photothermal activity to the CS film. The in vivo experiments ascertain that the synergetic effect of the controlled-released aFGF and low temperature photothermal therapy collectively accelerate scald wound healing outcomes within 14 days by facilitating granulation formation, collagen deposition, re-epithelialization and angiogenesis. This study opens up new possibilities for the development of multifunctional chitosan-based wound dressings and the creation of innovative drug delivery platforms.

A pilot study: Nano-hydroxyapatite-PEG/PLA containing low dose rhBMP2 stimulates proliferation and osteogenic differentiation of human bone marrow derived mesenchymal stem cells

Background

Bone morphogenetic protein 2 (BMP2) can enhance posterolateral spinal fusion (PLSF). The minimum effective dose that may stimulate mesenchymal stem cells however remains unknown. Nano-hydroxyapatite (nHAp) polyethylene glycol (PEG)/polylactic acid (PLA) was combined with recombinant human BMP2 (rhBMP2). We in vitro evaluated proliferation, differentiation, and osteogenic genes of human bone marrow mesenchymal stem cells with 0.5, 1.0, and 3.0 μg/mL rhBMP2 doses in this study.

Methods

In vitro experimental study was designed to proliferation by a real-time quantitative cell analysis system and the osteogenic differentiation by alkaline phosphatase (ALP) activity and osteogenic marker (Runx2, OPN, and OCN) gene expressions of human derived bone marrow mesenchymal stem cells (hBMMSCs). nHAp was produced by wet chemical process and characterized by Fourier transform infrared spectrophotometer, scanning electron microscopy, and energy-dispersive x-ray spectroscopy. PEG/PLA polymer was produced at a 51:49 molar ratio. 0.5, 1.0, and 3.0 μg/mL rhBMP2 and nHAp was combined with the polymers. hBMMSCs were characterized by multipotency assays and surface markers were assessed by flow cytometer. The hBMMSC-rhBMP2 containing nHAp-PEG/PLA composite interaction was evaluated by transmission electron microscopy. Proliferative effect was evaluated by real-time proliferation analysis, and osteogenic capacity was evaluated by ALP activity assay and qPCR.

Results

hBMMSC proliferation in the 0.5 μg/mL rhBMP2 + nHAp-PEG/PLA and the 1.0 μg/mL rhBMP2 + nHAp-PEG/PLA groups were higher compared to control. 1.0 μg/mL rhBMP2 + nHAp-PEG/PLA and 3.0 μg/mL rhBMP2 + nHAp-PEG/PLA containing composites induced ALP activity on days 3 and 10. 0.5 μg/mL rhBMP2 + nHAp-PEG/PLA application stimulated Runx2 and OPN gene expressions.

Conclusion

rhBMP2 + nHAp-PEG/PLA composites stimulate hBMMSC proliferation and differentiation. The nHAp-PEG/PLA composite with low dose of rhBMP2 may enhance bone formation in future clinical PLSF applications.

Osteogenic and antibacterial PLLA membrane for bone tissue engineering

Insufficient bone regeneration and bacterial infection are two major concerns of bone repair materials. Poly-L-lactic acid (PLLA) have been widely used in bone tissue engineering (BTE), however, lack of osteogenic and antibacterial properties have greatly limit its clinical application. Herein, PLLA membrane was firstly treated with polydopamine (PDA), and then modified with ε-polylysine (ε-PL) and alginate (ALG) via layer-by-layer method. The (ε-PL/ALG)n composite layer coated PLLA (PLLA@(ε-PL/ALG)n) could facilitates the adhesion and osteoblast differentiation of MC3T3-E1 cells. Furthermore, PLLA@(ε-PL/ALG)n presents an effective antibacterial efficacy against S. aureus and E. coli, and the bacterial survival rates of S. aureus and E. coli on PLLA@(ε-PL/ALG)10 were 21.5 ± 3.5 % and 13 ± 2.1 %, respectively. This work provides a promising method to design PLLA materials with osteogenic and antibacterial activity simultaneously. Furthermore, the method is also an optional choice to construct multifunctional coatings on the other substrate.

Recapitulation of growth factor-enriched microenvironment via BMP receptor activating hydrogel

Exposure to a growth factor abundant milieu has remarkable regenerative and rejuvenating effects on organ diseases, tissue damage, and regeneration, including skeletal system defects and bone regeneration. Although the introduction of candidate growth factors into relevant fields has been reported, their regenerative effects remain unsatisfactory, mainly because of the experimental challenges with limited types of growth factors, elusive dosage adjustment, and asynchronous stem cell activation with cytokine secretion. Here, an innovative hydrogel recapitulating a growth factor-enriched microenvironment (GEM) for regenerative advantage, is reported. This sulfated hydrogel includes bone morphogenetic protein-2 (BMP-2), an essential growth factor in osteogenesis, to direct mesenchymal stem cell (MSC) differentiation, stimulate cell proliferation, and improve bone formation. The semi-synthetic hydrogel, sulfonated gelatin (S-Gelatin), can amplify BMP-2 signaling in mouse MSCs by enhancing the binding between BMP-2 and BMP-2 type II receptors (BMPR2), which are located on MSC nuclei and activated by the hydrogel. Importantly, the dramatically improved cytokine secretion of MSCs throughout regeneration confirms the growth factor-acquiring potential of S-Gelatin/rhBMP-2 hydrogel, leading to the vascularization enhancement. These findings provide a new strategy to achieve an in situ GEM and accelerated bone regeneration by amplifying the regenerative capacity of rhBMP-2 and capturing endogenous growth factors.

Icariin Has a Synergistic Effect on the Osteoinductivity of Bone Morphogenetic Protein 2 at Ectopic Sites

OBJECTIVE

Establishing biocompatible, biodegradable, osteoconductive, and osteoinductive bone materials remains a challenging subject in the research of bone healing and bone regeneration. Previously, we demonstrated the osteogenic and osteoconductive effects of biomimetic calcium phosphate (BioCaP) incorporating with Icariin and/or bone morphogenetic protein 2 (BMP-2) at orthotopic sites.

METHODS

By implanting the BioCaP granules incorporated Icariin and/or BMP-2 into the dorsal subcutaneous pockets of adult male Sprague-Dawley (S-D) rats (6-7 weeks old), we investigated the osteoinductive efficacy of the samples. Micro-computed tomography(micro-CT) observations and histological slices were used to verify the osteoinduction of this system on the 2^nd and 5^th week. Statistical significances was evaluated using Turkey's post hoc test of one-way analysis of variance.

RESULTS

The osteoinduction of the BioCaP incorporated with BMP-2 or both agents was confirmed as expected. BioCaP with Icariin alone could not generate bone formation at an ectopic sites. Nevertheless, co-administration of Icariin increased bone mineral density (BMD; p < 0.01) (628mg HA/cm³ vs 570mg HA/cm³ ) and completely changed the distribution of newly formed bone when compared with the granules with BMP-2 alone, even though there was no significant difference in the volume of newly formed bone. In contrast, the BioCaP with both agents (37.86%) had significantly fewer remaining materials than the other groups by the end of the fifth week (53.22%, 53.62% and 48.22%) (p < 0.01).

CONCLUSION

The co-administration of Icariin and BMP-2 increased BMD changed the distribution of newly formed bone, and reduced the amount of remaining materials. Therefore, Icariin can stimulate BMP-2 when incorporated into BioCaP granules at ectopic sites, which makes it useful for bone tissue engineering.

Dopamine/DOPAC-assisted immobilization of bone morphogenetic protein-2 loaded Heparin/PEI nanogels onto three-dimentional printed calcium phosphate ceramics for enhanced osteoinductivity and osteogenicity

Nowadays, the three-dimensional (3D) printed calcium phosphate (CaP) ceramics have well-designed geometric structure, but suffer from relative weak osteoinductivity. Surface modification by incorporating bone morphogenetic protein-2 (BMP2) onto scaffolds is considered as an efficient approach to improve their bioactivity. However, high dose and uncontrolled burst release of BMP2 may cause undesired side effect. In the present study, porous BCP ceramics with inverse face-centred cube structure prepared by digital light processing (DLP)-based 3D printing technique were used as the substrates. BMP2 proteins were loaded in the self-assembled Heparin/PEI nanogels (NP/BMP2), and then immobilized onto BCP substrates through the intermediate mussel-derived bioactive dopamine and dihydroxyphenylacetic acid (DA/DOPAC) coating layers to construct functional BCP/layer/NP/BMP2 scaffolds. Our results showed that Heparin/PEI nanogel was a potent delivery system for BMP2, and BCP/layer/NP/BMP2 scaffolds exhibited the high loading capacity, controlled release rate, and sustained local delivery of BMP2. In vitro cell experiments with bone marrow stromal cells (BMSCs) found that BCP/layer/NP/BMP2 could promote cell proliferation, facilitate cell spreading, accelerate cell migration, up-regulate expression of osteogenic genes, and improve synthesis of osteoblast-related proteins. Moreover, the murine intramuscular implantation model suggested that BCP/layer/NP/BMP2 had a superior osteoinductive capacity, and the rat femoral condyle defect repair model showed that BCP/layer/NP/BMP2 could enhance in situ bone repair and regeneration. These findings demonstrate that the incorporation of BMP2 loaded Heparin/PEI nanogels to 3D printed scaffolds holds great promise in fabricating bone graft with a superior biological performance for orthopedic application.

Precisely Localized Bone Regeneration Mediated by Marine-Derived Microdroplets with Superior BMP-2 Binding Affinity

Prompt and robust bone regeneration has been clinically achieved using supraphysiological doses of bone morphogenetic protein-2 (BMP-2) to overcome the short half-life and rapid clearance. However, uncontrolled burst release of exogenous BMP-2 causes severe complications such as heterotopic ossification and soft tissue inflammation. Therefore, numerous researches have focused on developing a new BMP-2 delivery system for a sustained release profile by immobilizing BMP-2 in various polymeric vehicles. Herein, to avoid denaturation of BMP-2 and enhance therapeutic action via localized delivery, a complex coacervate consisting of fucoidan, a marine-derived glycosaminoglycan, and poly-l-lysine (PLL) is fabricated. Superior BMP-2 binding ability and electrostatic interaction-driven engulfment enable facile and highly efficient microencapsulation of BMP-2. The microencapsulation ability of the coacervate significantly improves BMP-2 bioactivity and provides protection against antagonist and proteolysis, while allowing prolonged release. Moreover, BMP-2 containing coacervate is coated on conventional collagen sponges. The bioactivity and localized bone regenerating ability are confirmed through in vitro (human-derived stem cells), and in vivo (calvarial bone defect model) evaluations.

Bioinspired Surface Functionalization of Poly(ether ether ketone) for Enhancing Osteogenesis and Bacterial Resistance

In orthopedics, developing functionalized biomaterials to enhance osteogenesis and bacterial resistance is crucial. Although poly(ether ether ketone) (PEEK) is regarded as an important engineering plastic for biomedical material with excellent mechanical properties and biocompatibility, its biological inertness has greatly compromised its application in biomedical engineering. Inspired by the catecholamine chemistry of mussels, we propose a universal and versatile approach for enhancing the osteogenesis and antibacterial performances of PEEK based on surface functionalization of polydopamine-modified nanohydroxyapatite and lysozyme simultaneously. The characterizations of surface morphology and elemental composition revealed that the composite coating was successfully added to the PEEK surface. Additionally, the in vitro cell experiment and biomineralization assay indicated that the composite coating-modified PEEK was biocompatible with significantly improved bioactivity to promote osteogenesis and biomineralization compared with the untreated PEEK. Furthermore, the antibacterial test demonstrated that the composite coating had a strongly destructive effect on two bacteria (Staphylococcus aureus and Escherichia coli) with antibacterial ratios of 98.7% and 96.1%, respectively. In summary, the bioinspired method for surface functionalization can enhance the osteogenesis and bacterial resistance of biomedical materials, which may represent a potential approach for designing functionalized implants in orthopedics.

Metal Phenolic Nanodressing of Porous Polymer Scaffolds for Enhanced Bone Regeneration via Interfacial Gating Growth Factor Release and Stem Cell Differentiation

Porous polymer scaffolds are essential materials for tissue engineering because they can be easily processed to deliver stem cells or bioactive factors. However, scaffolds made of synthetic polymers normally lack a bioactive cell-material interface and undergo a burst release of growth factors, which may hinder their further application in tissue engineering. In this paper, a metal-phenolic network (MPN) was interfacially constructed on the pore surface of a porous poly(dl-lactide) (PPLA) scaffold. Based on the molecular gating property of the MPN supramolecular structure, the PPLA@MPN scaffold achieved the sustained release of the loaded molecules. In addition, the MPN coating provided a bioactive interface, thus encouraging the migration and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). The PPLA@MPN scaffolds exhibited enhanced bone regeneration in a rat femoral defect model in vivo compared to PPLA, which is ascribed to the combined effect of sustained bone morphogenetic protein-2 (BMP-2) release and the osteogenic ability of MPN. This nanodressing technique provides a viable and straightforward strategy for enhancing the performance of porous polymer scaffolds in bone tissue engineering.

A 3D-printed bioactive polycaprolactone scaffold assembled with core/shell microspheres as a sustained BMP2-releasing system for bone repair

Integration of biological factors and hierarchical rigid scaffolds is of great interest in bone tissue engineering for fabrication of biomimetic constructs with high physical and biological performance for enhanced bone repair. Core/shell microspheres (CSMs) delivering bone morphogenetic protein-2 (BMP-2) and a strategy to integrate CSMs with 3D-printed scaffolds were developed herein to form a hybrid 3D system for bone repair. The scaffold was printed with polycaprolactone (PCL) and then coated with polydopamine. Shells of CSMs were electrosprayed with alginate. Cores were heparin-coated polylactic acid (PLA) microparticles fabricated via simple emulsion and heparin coating strategy. Assembly of microspheres and scaffolds was realized via a self-locking method with the assistance of controlled expansion of CSMs. The hybrid system was evaluated in the rat critical-sized bone defect model. CSMs released BMP-2 in a tunable manner and boosted osteogenic performance in vitro. CSMs were then successfully integrated inside the scaffolds. The assembled system effectively promoted osteogenesis in vitro and in vivo. These observations show the importance of how BMP-2 is delivered, and the core/shell microspheres represent effective BMP-2 carriers that could be integrated into scaffolds, together forming a hybrid system as a promising candidate for enhanced bone regeneration.

The Role of Growth Factors in Bioactive Coatings

With increasing obesity and an ageing population, health complications are also on the rise, such as the need to replace a joint with an artificial one. In both humans and animals, the integration of the implant is crucial, and bioactive coatings play an important role in bone tissue engineering. Since bone tissue engineering is about designing an implant that maximally mimics natural bone and is accepted by the tissue, the search for optimal materials and therapeutic agents and their concentrations is increasing. The incorporation of growth factors (GFs) in a bioactive coating represents a novel approach in bone tissue engineering, in which osteoinduction is enhanced in order to create the optimal conditions for the bone healing process, which crucially affects implant fixation. For the application of GFs in coatings and their implementation in clinical practice, factors such as the choice of one or more GFs, their concentration, the coating material, the method of incorporation, and the implant material must be considered to achieve the desired controlled release. Therefore, the avoidance of revision surgery also depends on the success of the design of the most appropriate bioactive coating. This overview considers the integration of the most common GFs that have been investigated in in vitro and in vivo studies, as well as in human clinical trials, with the aim of applying them in bioactive coatings. An overview of the main therapeutic agents that can stimulate cells to express the GFs necessary for bone tissue development is also provided. The main objective is to present the advantages and disadvantages of the GFs that have shown promise for inclusion in bioactive coatings according to the results of numerous studies.

Experimental Study on the Effect of miR-200b Regulation of Bone Morphogenetic Protein (BMP)-2 Expression on the Proliferation and Invasion of Nasopharyngeal Carcinoma Cells

BMP is an important member of the skeletal junction proteins associated with cell invasion, metastasis, and migration. MiR-200b is associated with the progression of several tumors. This study investigated whether miR-200b plays a role in regulating BMP-2 expression and affecting the proliferation and invasion of nasopharyngeal carcinoma cells. The nasopharyngeal carcinoma tissues with different TNM stages were collected and the proliferative nasal tissues alone were used as controls to detect the expression of miR-200b and BMP by RT-PCR. The nasopharyngeal carcinoma cell line CNE1 cells were divided into miR-NC group, miR-200b mimic group, siRNA-NC group, and siRNA-BMP-2 group, to detect BMP-2 level, cell invasion and proliferation ability by transwell. The BMP-2 mRNA expressed in nasopharyngeal carcinoma tissues was significantly elevated compared to controls and correlated with TNM stage. BMP-2 was higher in tumor tissues than in controls, however, the expression profile of miR-200b was opposite to BMP-2. Transfection with miR-200b mimic or siRNA-BMP-2 significantly down-regulated BMP-2 in CNE1 cells and attenuated cell invasive and proliferative capacity. Reduced expression of miR-200b is associated with elevated BMP-2 expression and increased invasive capacity of nasopharyngeal cancer cells. Overexpression of miR-200b reduces the invasive and proliferative capacity of nasopharyngeal cancer cells by targeting and inhibiting BMP-2 expression.

Fabricating a novel HLC-hBMP2 fusion protein for the treatment of bone defects

Treating serious bone trauma with an osteo-inductive agent such as bone morphogenetic proteins (BMPs) has been considered as an optimized option when delivered via a collagen sponge (CS). Previous works have shown that the BMP concentration and release rate from approved CS carriers is difficult to control with precision. Here we presented the fabrication of a recombinant fusion protein from recombinant human-like collagen (HLC) and human BMP-2 (hBMP2). The fusion protein preserved the characteristic of HLC allowing the recombinant protein to be expressed in Yeast (such as Pichia pastoris GS115) and purified rapidly and easily with mass production after methanol induction. It also kept the stable properties of HLC and hBMP2 in the body fluid environment with good biocompatibility and no cytotoxicity. Moreover, the recombinant fusion protein fabricated a vertical through-hole structure with improved mechanical properties, and thus facilitated migration of bone marrow mesenchymal stem cells (MSCs) into the fusion materials. Furthermore, the fusion protein degraded and released hBMP-2 in vivo allowing osteoinductive activity and the enhancement of utilization rate and the precise control of the hBMP2 release. This fusion protein when applied to cranial defects in rats was osteoinductively active and improved bone repairing enhancing the repairing rate 3.5- fold and 4.2- fold when compared to the HLC alone and the control, respectively. There were no visible inflammatory reactions, infections or extrusions around the implantation sites observed. Our data strongly suggests that this novel recombinant fusion protein could be more beneficial in the treatment of bone defects than the simple superposition of the hBMP2/collagen sponge.

Elastin-like polypeptide modified silk fibroin porous scaffold promotes osteochondral repair

Silk fibroin (SF) is considered biocompatible and biodegradable for osteochondral repair. However, it lacks a bioactive domain for cell adhesion, proliferation and differentiation, limiting its therapeutic efficacy. To revamp SF as a biomimicking and bioactive microenvironment to regulate cell behaviours, we engineered an elastin-like polypeptide (ELP, Val-Pro-Gly-Xaa-Gly) to modify SF fibers via simple and green dehydrothermal (DHT) treatment. Our results demonstrated that the ELP successfully bound to SF, and the scaffold was reinforced by the fusion of the silk fiber intersections with ELP (S-ELP-DHT) via the DHT treatment. Both bone mesenchymal stem cells (BMSCs) and chondrocytes exhibited improved spreading and proliferation on the S-ELP-DHT scaffolds. The ex vivo and in vivo experiments further demonstrated enhanced mature bone and cartilage tissue formation using the S-ELP-DHT scaffolds compared to the naked SF scaffolds. These results indicated that a recombinant ELP-modified silk scaffold can mimic three-dimensional (3D) cell microenvironment, and improve bone and cartilage regeneration. We envision that our scaffolds have huge clinical potential for osteochondral repair.

•

Elastin-like polypeptide (ELP) modified silk fibroin (SF) scaffold was developed via dehydrothermal treatment (S-ELP-DHT).

•

The S-ELP-DHT scaffold provided a beneficial cell microenvironment for osteochondral repair.

•

Greater mature bone and cartilage tissue formation were achieved.

•

Improved repair efficacy for articular osteochondral defects was confirmed.

The Delivery of RNA-Interference Therapies Based on Engineered Hydrogels for Bone Tissue Regeneration

RNA interference (RNAi) is an efficient post-transcriptional gene modulation strategy mediated by small interfering RNAs (siRNAs) and microRNAs (miRNAs). Since its discovery, RNAi has been utilized extensively to diagnose and treat diseases at both the cellular and molecular levels. However, the application of RNAi therapies in bone regeneration has not progressed to clinical trials. One of the major challenges for RNAi therapies is the lack of efficient and safe delivery vehicles that can actualize sustained release of RNA molecules at the target bone defect site and in surrounding cells. One promising approach to achieve these requirements is encapsulating RNAi molecules into hydrogels for delivery, which enables the nucleic acids to be delivered as RNA conjugates or within nanoparticles. Herein, we reviewed recent investigations into RNAi therapies for bone regeneration where RNA delivery was performed by hydrogels.

3D-printing of solvent exchange deposition modeling (SEDM) for a bilayered flexible skin substitute of poly (lactide-co-glycolide) with bioorthogonally engineered EGF

Biodegradable polyesters have been widely used as rigid biomedical apparatus because of high mechanical properties but few flexible implants. Herein, we report a flexible poly(lactide-co-glycolide) (PLGA) scaffold using a rapid in situ formation system based on phase separation by solvent exchange deposition modeling (SEDM), which was different from traditional 3D printing of fused deposition modeling (FDM). The FDM printed product was rigidity, its Young's modulus was approximate 2.6 times higher than that of SEDM printed sample. In addition, the thickness of the solidified ink would not shrink during the SEDM printing process, its surface had nano-/micro pores in favor of protein immobilization and cell adhesion. Then a flexible bilayered scaffold with nano-/microstructure was constructed combing SEDM with electrospinning technology for skin substitute, wherein the SEDM printed sample acted as a sub-layer for cell and tissue ingrowth, the densely packed electrospun nanofibers served as an upper-layer improving the sub-layer's tensile strength by 57.07% and preventing from bacteria as physical barrier. Ultimately, the bilayered scaffold immobilized epidermal growth factor (EGF) by a bioorthogonal approach was successfully applied to facilitate full-thickness wound healing of rats.

Proteins and Peptides as Important Modifiers of the Polymer Scaffolds for Tissue Engineering Applications-A Review

Polymer scaffolds constitute a very interesting strategy for tissue engineering. Even though they are generally non-toxic, in some cases, they may not provide suitable support for cell adhesion, proliferation, and differentiation, which decelerates tissue regeneration. To improve biological properties, scaffolds are frequently enriched with bioactive molecules, inter alia extracellular matrix proteins, adhesive peptides, growth factors, hormones, and cytokines. Although there are many papers describing synthesis and properties of polymer scaffolds enriched with proteins or peptides, few reviews comprehensively summarize these bioactive molecules. Thus, this review presents the current knowledge about the most important proteins and peptides used for modification of polymer scaffolds for tissue engineering. This paper also describes the influence of addition of proteins and peptides on physicochemical, mechanical, and biological properties of polymer scaffolds. Moreover, this article sums up the major applications of some biodegradable natural and synthetic polymer scaffolds modified with proteins and peptides, which have been developed within the past five years.

Newly Designed Human-Like Collagen to Maximize Sensitive Release of BMP-2 for Remarkable Repairing of Bone Defects

Designing the “ideal” hydrogel/matrix which can load bone morphogenetic protein-2 (BMP-2) in a low dose and with a sustained release is the key for its successful therapeutic application to enhance osteogenesis. The current use of natural collagen sponges as hydrogel/matrix is limited due to the collagen matrix showing weak mechanical strength and unmanageable biodegradability. Furthermore, the efficiency and safe dose usage of the BMP-2 has never been seriously considered other than purely chasing the lowest dose usage and extended-release time. In this paper, we customized a novel enzymatically cross-linked recombinant human-like collagen (HLC) sponge with low immunogenicity, little risk from hidden viruses, and easy production. We obtained a unique vertical pore structure and the porosity of the HLC, which are beneficial for Mesenchymal stem cells (MSCs) migration into the HLC sponge and angiopoiesis. This HLC sponge loading with low dose BMP-2 (1 µg) possessed high mechanical strength along with a burst and a sustained release profile. These merits overcome previous limitations of HLC in bone repair and are safer and more sensitive than commercial collagens. For the first time, we identified that a 5 µg dose of BMP-2 can bring about the side effect of bone overgrowth through this sensitive delivery system. Osteoinduction of the HLC-BMP sponges was proved by an in vivo mouse ectopic bone model and a rat cranial defect repair model. The method and the HLC-BMP sponge have the potential to release other growth factors and aid other tissue regeneration. Additionally, the ability to mass-produce HLC in our study overcomes the current supply shortage, which limits bone repair in the clinic.

Dramatic promotion of wound healing using a recombinant human-like collagen and bFGF cross-linked hydrogel by transglutaminase

The basic fibroblast growth factor (bFGF) plays an important role in the wound repair process. However, lacking of better biomaterials to carry bFGF still is a challenge in skin repair and regeneration. In this study, the human-like collagen (HLC) cross-linked with transglutaminase (TG) to fabricate a HLC/TG hydrogel to load bFGF. The physical properties of hydrogel, such as interior structure, mechanical property, were characterized in vitro using scanning electron microscopy (SEM), rheometer. Then, the effects of the HLC/TG hydrogel on the bFGF and cell attachmentwere evaluated, and the results showed that the HLC/TG hydrogel has good biocompatibility towards bFGF and cells. Finally, skin wound healing test was performed for the evaluation of HLC/TG hydrogels with bFGF in a mouse model. All results of macroscopic and microscopic analysis indicated that not only our HLC/TG hydrogel provide a delivery of growth factors, but also the HLC/TG hydrogel with bFGF achieving better skin regeneration in the structure and function.

Fabrication and characterization of poly (ethylenimine) modified poly (l-lactic acid) nanofibrous scaffolds

Bone tissue engineering aims to construct biological substitutes for repairing bone defects. Nanofibrous (NF) scaffolds are commonly utilized to mimic the extracellular matrix (ECM) environment and promote tissue regeneration in tissue engineering process. Poly (lactic acid) (PLA) has attracted much attention in the field of tissue engineering because of its biocompatibility, biodegradability and so on. However, the intrinsic hydrophobicity and the lacking of active functional groups limit its practical application to some extent. In this study, poly(ethylenimine) (PEI) modified PLLA nanofibrous scaffolds were fabricated in a one step process by aminolysis combined with thermally induced phase separation technique for introducing more functional groups, PEI acting as the modifier. The morphology of PEI-modified PLLA scaffolds prepared under different experimental conditions was analyzed by scanning electron microscope (SEM). The suitable conditions to fabricate scaffolds with a homogeneous nanofibrous structure, good hydrophilicity and excellent mechanical properties were determined according to the results of SEM, water contact angle (WCA) and mechanical properties testing. Besides, Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR), X-ray Photoelectron Spectroscopy (XPS) and gel permeation chromatography (GPC) were used to confirm the occurrence of the ammonolysis reaction between PLLA and PEI. The in vitro biomineralization study showed that the PEI-modified PLLA scaffolds had a greater ability to induce the formation of apatite in 1.5SBF than PLLA scaffolds, indicating that the bone-bioactivity of PLLA scaffolds was significantly improved after modification with PEI. Furthermore, cell culture assay revealed that MC3T3-E1 osteoblasts exhibited better proliferation performance on the PEI-modified PLLA scaffolds. All the results implied that the synthesized modified PLLA nanofibrous scaffolds may provide promising applications in bone tissue engineering.

Enhancing cell seeding and osteogenesis of MSCs on 3D printed scaffolds through injectable BMP2 immobilized ECM-Mimetic gel

OBJECTIVE

Design of bioactive scaffolds with osteogenic capacity is a central challenge in cell-based patient-specific bone tissue engineering. Efficient and spatially uniform seeding of (stem) cells onto such constructs is vital to attain functional tissues. Herein we developed heparin functionalized collagen gels supported by 3D printed bioceramic scaffolds, as bone extracellular matrix (ECM)-mimetic matrices. These matrices were designed to enhance cell seeding efficiency of mesenchymal stem cells (MSCs) as well as improve their osteogenic differentiation through immobilized bone morphogenic protein 2 (BMP2) to be used for personalized bone regeneration.

METHODS

A 3D gel based on heparin-conjugated collagen matrix capable of immobilizing recombinant human bone morphogenic protein 2 (BMP2) was synthesized. Isolated dental pulp Mesenchymal stem cells (MSCs) were then encapsulated into the bone ECM microenvironment to efficiently and uniformly seed a bioactive ceramic-based scaffold fabricated using additive manufacturing technique. The designed 3D cell-laden constructs were comprehensively investigated trough in vitro assays and in vivo study.

RESULTS

In-depth rheological characterizations of heparin-conjugated collagen gel revealed that elasticity of the matrix is significantly improved compared with freely incorporated heparin. Investigation of the MSCs laden collagen-heparin hydrogels revealed their capability to provide spatiotemporal bioavailability of BMP2 while suppressing the matrix contraction over time. The in vivo histology and real-time polymerase chain reaction (qPCR) analysis showed that the designed construct supported the osteogenic differentiation of MSCs and induced the ectopic bone formation in rat model.

SIGNIFICANCE

The presented hybrid constructs combine bone ECM chemical cues with mechanical function providing an ideal 3D microenvironment for patient-specific bone tissue engineering and cell therapy applications. The implemented methodology in design of ECM-mimetic 3D matrix capable of immobilizing BMP2 to improve seeding efficiency of customized scaffolds can be exploited for other bioactive molecules.

Polydopamine-Assisted Anchor of Chitosan onto Porous Composite Scaffolds for Accelerating Bone Regeneration

Surface function has an importance for the bioactivity of porous polymeric scaffolds. The goal of the present study is to immobilize highly bioactive chitosan (CS) onto the surface of porous composite scaffolds to accelerate bone regeneration. Porous poly(ε-caprolactone) (PCL)/bioactive glass (BG) composite scaffolds with strong anchor of CS were fabricated via mussel-inspired polydopamine (PDA) coating as a bridging layer. In vitro cell culture showed that firm immobilization of CS onto the composite scaffolds significantly enhanced protein adsorption, cell adhesion, and osteogenic differentiation compared to CS-decorated scaffolds via physical adsorption. In vivo assessments demonstrated that covalent immobilization of CS onto the surface of scaffolds obviously promoted cranial bone regeneration in comparison with the counterparts with physical adsorption of CS. The proposed method offers a feasible and effective means to fabricate artificial bioactive scaffolds for bone tissue engineering application.