Fabrication and Electrochemical Performance of Polyoxometalate-Based Three-Dimensional Metal Organic Frameworks Containing Carbene Nanocages

Advances of Electroactive Metal-Organic Frameworks

The preparation of electroactive metal-organic frameworks (MOFs) for applications of supercapacitors and batteries has received much attention and remarkable progress during the past few years. MOF-based materials including pristine MOFs, hybrid MOFs or MOF composites, and MOF derivatives are well designed by a combination of organic linkers (e.g., carboxylic acids, conjugated aromatic phenols/thiols, conjugated aromatic amines, and N-heterocyclic donors) and metal salts to construct predictable structures with appropriate properties. This review will focus on construction strategies of pristine MOFs and hybrid MOFs as anodes, cathodes, separators, and electrolytes in supercapacitors and batteries. Descriptions and discussions follow categories of electrochemical double-layer capacitors (EDLCs), pseudocapacitors (PSCs), and hybrid supercapacitors (HSCs) for supercapacitors. In contrast, Li-ion batteries (LIBs), Lithium-sulfur batteries (LSBs), Lithium-oxygen batteries (LOBs), Sodium-ion batteries (SIBs), Sodium-sulfur batteries (SSBs), Zinc-ion batteries (ZIBs), Zinc-air batteries (ZABs), Aluminum-sulfur batteries (ASBs), and others (e.g., LiSe, NiZn, H⁺ , alkaline, organic, and redox flow batteries) are categorized for batteries.

Operando X-ray Studies of Ni-Containing Heteropolyvanadate Electrode for High-Energy Lithium-Ion Storage Applications

Ni-containing heteropolyvanadate, Na₆[NiV₁₄O₄₀], was synthesized for the first time to be applied in high-energy lithium storage applications as a negative electrode material. Na₆[NiV₁₄O₄₀] can be prepared via a facile solution process that is suitable for low-cost mass production. The as-prepared electrode provided a high capacity of approximately 700 mAh g^-1 without degradation for 400 cycles, indicating excellent cycling stability. The mechanism of charge storage was investigated using operando X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), transition X-ray microscopy (TXM), and density functional theory (DFT) calculations. The results showed that V⁵⁺ was reduced to V²⁺ during lithiation, indicating that Na₆[NiV₁₄O₄₀] is an insertion-type material. In addition, Na₆[NiV₁₄O₄₀] maintained its amorphous structure with negligible volume expansion/contraction during cycling. Employed as the negative electrode in a lithium-ion battery (LIB), the Na₆[NiV₁₄O₄₀]//LiFePO₄ full cell had a high energy density of 300 W h kg^-1. When applied in a lithium-ion capacitor, the Na₆[NiV₁₄O₄₀]//expanded mesocarbon microbead full cell displayed energy densities of 218.5 and 47.9 W h kg^-1 at power densities of 175.7 and 7774.2 W kg^-1, respectively. These findings reveal that the negative electrode material Na₆[NiV₁₄O₄₀] is a promising candidate for Li-ion storage applications.

Advanced Anode Materials for Sodium-Ion Batteries: Confining Polyoxometalates in Flexible Metal-Organic Frameworks by the "Breathing Effect"

Polyoxometalates (POMs) have shown great potential in sodium-ion batteries (SIBs) due to their reversible multielectron redox property and high ionic conductivity. Currently, POM-based SIBs suffer from the irreversible trapping and sluggish transmission kinetics of Na⁺. Herein, a series of POMs/metal-organic frameworks (MOFs)/graphene oxide (GO) (MOFs = MIL-101, MIL-53, and MIL-88B; POM = [PMo₁₂O₄₀]^3-, denoted as PMo₁₂) composites are developed as SIB anode materials for the first time. Unlike MIL-101 with large pore structures, the pores in flexible MIL-53 and MIL-88B swell spontaneously upon the accommodation of PMo₁₂. Particularly, the PMo₁₂/MIL-88B/GO composites deliver an excellent specific capacity of 214.2 mAh g^-1 for 600 cycles at 2.0 A g^-1, with a high initial Coulombic efficiency (ICE) of 51.0%. The so-called "breathing effect" of flexible MOFs leads to the relatively tight confinement space for PMo₁₂, which greatly modulates its electronic structure, affects the adsorption energy of Na⁺, and eventually reduces the trapping of sodium ions. Additionally, the straight and multidimensional channels in MIL-88B significantly accelerate ion diffusion, inducing favored energetic kinetics and thus generating high-rate performance.

Self-Assembly of Polyoxometalate-Resorcin[4]arene-Based Inorganic-Organic Complexes: Metal Ion Effects on the Electrochemical Performance of Lithium Ion Batteries

With their adjustable structures and diverse functions, polyoxometalate (POM)-resorcin[4]arene-based inorganic-organic complexes are a kind of potential multifunctional material. They have potential applications for lithium ion batteries (LIBs). However, the relationship between different coordinated metal ions and electrochemical performance has rarely been investigated. Here, three functionalized POM-resorcin[4]arene-based inorganic-organic materials, [Co₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅2 EtOH⋅4.5 H₂ O (1), [Ni₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅4 EtOH⋅13 H₂ O (2), and [Zn₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅2 EtOH⋅2 H₂ O (3), have been synthesized. Furthermore, to enhance the conductivities of these compounds, 1-3 were doped with reduced graphene oxide (RGO) to give composites 1@RGO-3@RGO, respectively. As anode materials for LIBs, 1@RGO-3@RGO can deliver very high discharge capacities (1445.9, 1285.0 and 1095.3 mAh g^-1 , respectively) in the initial run, and show discharge capacities of 898, 665 and 651 mAh g^-1 , respectively, at a current density of 0.1 A g^-1 over 100 runs. More importantly, the discharge capacities of 319, 283 and 329 mAh g^-1 were maintained for 1@RGO-3@RGO even after 400 cycles at large current density (1 A g^-1 ).

A Copper-Containing Polyoxometalate-Based Metal-Organic Framework as an Efficient Catalyst for Selective Catalytic Oxidation of Alkylbenzenes

A copper-containing polyoxometalate-based metal-organic framework (POMOF), Cu^I₁₂Cl₂(trz)₈[HPW₁₂O₄₀] (HENU-7, HENU = Henan University; trz = 1,2,4-triazole), has been successfully synthesized and well-characterized. In addition, the excellent catalytic ability of HENU-7 has been proved by the selective oxidation of diphenylmethane. Under the optimal conditions, the diphenylmethane conversion obtained over HENU-7 is 96%, while the selectivity to benzophenone is 99%, which outperforms most noble-metal-free POM-based catalysts. Moreover, HENU-7 is stable to reuse for five runs without an obvious loss in activity and also can catalyze the oxidation of different benzylic C-H with satisfactory conversions and selectivities, which implied the significant catalytic activity and recyclability.

Polyoxometalate-Templated Cobalt-Resorcin[4]arene Frameworks: Tunable Structure and Lithium-Ion Battery Performance

By employing a bowl-like tetra(benzimidazole)resorcin[4]arene (TBR4A) ligand, two new polyoxometalate-templated metal-organic frameworks (POMOFs), [Co₈Cl₁₄(TBR4A)₆]·3[H_3.3SiW₁₂O₄₀]·10DMF·11EtOH·20H₂O (1) and [Co₃Cl₂(TBR4A)₂(DMF)₄]·[SiW₁₂O₄₀]·2EtOH·3H₂O (2), have been prepared under solvothermal conditions (DMF = N,N'-dimethylformamide). 1 shows a 2D cationic layer, whereas 2 exhibits a 3D framework. Remarkably, the Keggin POMs in 1 and 2 were located in the cavities formed by two bowl-like resorcin[4]arenes in sandwich fashions. Their framework structures were highly dependent on the coordination modes of the TBR4A ligands. To increase the conductivity of POMOFs, the samples of 1 and 2 were loaded on the conductive polypyrrole-reduced graphene oxide (PPy-RGO) via ball milling (1@PG and 2@PG). Then, the obtained composites experienced calcination at a proper temperature to produce 1@PG-A and 2@PG-A. The resulting 1@PG-A and 2@PG-A composites, with improved conductivities, uniform sizes and micropores, exhibited promising electrochemical performance for lithium-ion batteries. We herein proposed a size-controlled route for the rational fabrication of functional POMOFs and their usage in energy fields.

Assembly of 12-Tungstovanadate-Templated Nanocage and Nanocomposites with Single-Walled Carbon Nanotubes as Anodes in Lithium-Ion Batteries

A new 12-tungstovanadate-templated 3D nanocage framework, Ag₁₀(μ₄-ttz)₄(H₂O)₄(VW₁₂O₄₀) (VW₁₂@MOCF), was designed based on a "molecular library", hydrothermally synthesized, structurally characterized, and explored as anode material for lithium-ion batteries (LIBs). Combination of the structural superiority of VW₁₂@MOCF with the good electrical conductivity of the single-walled carbon nanotubes (SWNTs) renders the VW₁₂@MOCF/SWNT-2 nanocomposite reasonable electrochemical performance and stability as anode materials of LIBs. The successful cooperative fabrication of nanocages and polyoxometalate (POMs) must initiate extensive research interests.

A polypyrrole-coated eightfold-helical Wells-Dawson POM-based Cu-FKZ framework for enhanced colorimetric sensing

To explore a novel colorimetric biosensor with high sensibility and selectivity, a new Wells-Dawson-type polyoxometalate (POM)-based metal-organic framework (MOF) with an eightfold helix, [Cu₉(FKZ)₁₂(H₂O)₈][H₃P₂W₁₈O₆₂]₂·4H₂O (CuFKZP₂W₁₈) (HFKZ = 1-(2,4-difluorophenyl)-1,1-bis[(1H-1,2,4-triazol-1-yl)methyl] ethanol), was successfully synthesized; then, polypyrrole (PPy) was introduced to fabricate CuFKZP₂W₁₈/PPy(n) nanocomposites (n = 7%, 15%, 30%) via a facile in situ oxidation polymerization process. All the results indicate that CuFKZP₂W₁₈/PPy(15%) as a colorimetric biosensor exhibits lower limits of detection (0.07 μM towards H₂O₂ and 0.627 μM towards ascorbic acid), smaller K_m values (0.106 mM for H₂O₂ and 0.042 mM for o-phenylenediamine) and higher sensitivity (0.0227 1 μM^-1 towards H₂O₂ and 0.0025 1 μM^-1 to ascorbic acid) than most reported enzyme mimetics to the best of our knowledge.

Polyoxometalates on Functional Substrates: Concepts, Synergies, and Future Perspectives

Polyoxometalates (POMs) are molecular metal oxide clusters that feature a broad range of structures and functionalities, making them one of the most versatile classes of inorganic molecular materials. They have attracted widespread attention in homogeneous catalysis. Due to the challenges associated with their aggregation, precipitation, and degradation under operational conditions and to extend their scope of applications, various strategies of depositing POMs on heterogeneous substrates have been developed. Recent ground-breaking developments in the materials chemistry of supported POM composites are summarized and links between molecular-level understanding of POM-support interactions and macroscopic effects including new or optimized reactivities, improved stability, and novel function are established. Current limitations and future challenges in studying these complex composite materials are highlighted, and cutting-edge experimental and theoretical methods that will lead to an improved understanding of synergisms between POM and support material from the molecular through to the nano- and micrometer level are discussed. Future development in this fast-moving field is explored and emerging fields of research in POM heterogenization are identified.

Electrochemically active sites inside crystalline porous materials for energy storage and conversion

This review provides references for the preparation of electroactive CPMs via rational design and modulation of active sites and the space around them, and their application in electrochemical energy storage and conversion systems.

A polyoxometalate-encapsulated nanocage cluster organic framework built from {Cu4P2} units and its efficient bifunctional electrochemical performance

The first polyoxometalate-encapsulated twenty-four-nucleus organophosphorus-copper nanocage cluster organic framework has been constructed and it is shown to exhibit highly efficient bifunctional electrochemical performance.

Multiunit Catalysts with Synergistic Reactivity: Three-Dimensional Polyoxometalate-Based Coordination Polymers for Highly Efficient Synthesis of Functionalized p-Benzoquinones

The rational design of highly efficient catalysts for the synthesis of functionalized p-benzoquinones (p-BQs) is of great significance for the manufacture of bioactive compounds. Herein, two 3D crystalline polyoxometalate-based coordination polymers (POMCPs) are used as heterogeneous catalysts for the synthesis of p-BQs, which are H[Cu^II(ttb)(H₂O)₃]₂[Cu^II(ttb)Cl]₂[PW₁₂O₄₀]·4H₂O (1) (Httb = 1-(tetrazol-5-yl)-4-(triazol-1-yl)benzene) and [ClCu₆^I(trz₎₄][ClCu₅^I(trz)₄]₂[Cu^II(H₂O)][PW₁₂O₄₀] (2) (trz = 1,2,4-triazole). Both compounds were characterized by elemental analysis, IR, XPS, solid diffuse reflective spectroscopy, TG analysis, and single-crystal X-ray diffraction. In 1, Keggin anions [PW₁₂O₄₀]^3- locate in 1D square channels constructed from wave-like Cu-ttb layers to form a 3D POMCP by coordinating to Cu ions, and in 2, [PW₁₂O₄₀]^3- anions situate in eight-membered Cu-trz channels via Cu···O interactions to yield a 3D POMCP structure. The catalytic activities of 1 and 2 have been evaluated in the selective oxidation of alkylphenols/alkoxybenzenes/methylnaphthalene, especially in the oxidation reaction of 2,3,6-trimethylphenol (TMP) to 2,3,5-trimethyl-p-benzoquinone (TMBQ, vitamin E key intermediate), with H₂O₂ as oxidant. By using catalysts 1 and 2 under optimal conditions, the yield of TMBQ can reach 99% and 96% within 10-20 min, respectively. Both catalysts demonstrated high turnover frequencies (300 h^-1 for 1 and 600 h^-1 for 2) and the truly heterogeneous nature. 1 and 2 catalyzed the synthesis of p-BQs on the basis of effective cooperative catalytic activities by POMs and metal nodes.

Heightened Integration of POM-based Metal-Organic Frameworks with Functionalized Single-Walled Carbon Nanotubes for Superior Energy Storage

To increase the conductivity of polyoxometalate-based metal-organic frameworks (POMOFs) and promote their applications in the field of energy storage, herein, a simple approach was employed to improve their overall electrochemical performances by introducing a functionalized single-walled carbon nanotubes (SWNT-COOH). A new POMOF compound, [Cu₁₈ (trz)₁₂ Cl₃ (H₂ O)₂ ][PW₁₂ O₄₀ ] (CuPW), was successfully synthesized, then the size-matched functionalized SWNT-COOH was introduced to fabricate CuPW/SWNT-COOH composite (PMNT-COOH) by employing a simple sonication-driven periodic functionalization strategy. When the PMNT-COOH nanocomposite was used as the anode material for Lithium-ion batteries (LIBs), PMNT-COOH(3) (CuPWNC:SWNT-COOH=3:1) showed superior behavior of energy storage, a high reversible capacity of 885 mA h g^-1 up to a cycle life of 170 cycles. The electrochemical results indicate that the uniform packing of SWNT-COOH provided a favored contact between the electrolyte and the electrode, resulting in enhanced specific capacity during lithium insertion/extraction process. This fabrication of PMNT-COOH nanocomposite opens new avenues for the design and synthesis of new generation electrode materials for LIBs.

Polyoxometalate-Incorporated Metallacalixarene@Graphene Composite Electrodes for High-Performance Supercapacitors

Composites of polyoxometalate (POM)/metallacalixarene/graphene-based electrode materials not only integrate the superiority of the individual components perfectly but also ameliorate the demerits to some extent, providing a promising route to approach high-performance supercapacitors. Herein, first, we report the preparations, structures, and electrochemical performance of two fascinating POM-incorporated metallacalixarene compounds [Ag₅(C₂H₂N₃)₆][H₅ ⊂ SiMo₁₂O₄₀] (1) and [Ag₅(C₂H₂N₃)₆][H₅ ⊂ SiW₁₂O₄₀] (2); (C₂H₂N₃ = 1 H-1,2,4-triazole). Single-crystal X-ray diffraction analyses illustrated that both 1 and 2 possess intriguing POM-sandwiched metallacalix[6]arene frameworks. Nevertheless, our investigations, including the electrochemical cyclic voltammetry, galvanostatic charge-discharge tests, and electrochemical impedance spectroscopy, reveal that the oxidation ability of the Keggin ions is a primary effect in electrochemical performance of these POM-incorporated metallacalixarene compounds. Namely, the electrodes containing Mo as metal atoms in the Keggin POM shows much higher capacitance than the corresponding W-containing ones. Moreover, compound 1@graphene oxide (GO) composite electrodes are fabricated and systematically explored for their supercapacitor performance. Thanks to the synergetic effects of GO and POM-incorporated metallacalixarenes, the compound 1@15%GO-based electrode exhibits the highest specific capacitance of up to 230.2 F g^-1 (current density equal to 0.5 A g^-1), which is superior to majority of the reported POM-based electrode materials.

Enhancing the colorimetric detection of H2O2 and ascorbic acid on polypyrrole coated fluconazole-functionalized POMOFs

A new fluconazole-functionalized polyoxometalate-based metal-organic framework (POMOF) [Ag₃(FKZ)₂(H₂O)₂][H₃SiW₁₂O₄₀] (AgFKZSiW₁₂) was successfully constructed, and its polypyrrole (PPy) coated composite AgFKZSiW₁₂@PPy was also obtained via a facile 'in situ' oxidation polymerization process. The peroxidase-like activity evaluation indicates that the maximized synergistic effect from the integration of PPy, SiW₁₂ clusters, HFKZ drug molecules, and Ag ions deeply enhanced the overall performance. More importantly, AgFKZSiW₁₂@PPy exhibits the fastest response time (30 s) among all the reported peroxidase mimics to date, including the pristine AgFKZSiW₁₂ (2 min). Moreover, the AgFKZSiW₁₂@PPy-based colorimetric biosensing platform towards H₂O₂ and ascorbic acid (AA) exhibits limits of detection (LOD) as low as 0.12 μM and 2.7 μM, respectively. This work reveals a promising prospect in medical diagnosis and biotechnology for colorimetric biosensor fabrication with high performance through the introduction of PPy.