Optimization of Photocatalyst Excited- and Ground-State Reduction Potentials for Dye-Sensitized HBr Splitting

Highly Efficient Photoelectrochemical Alkene Epoxidation on a Dye-Sensitized Photoanode

In photoelectrochemical (PEC) cells, selective oxidation of organic substrates coupled with hydrogen evolution represents a promising approach for value-added chemical production and solar energy conversion. In this study, we report on PEC epoxidation of alkenes at a ruthenium dye-sensitized photoanode in a CH3CN/H2O mixed solvent with LiBr as a mediator and water as the oxygen source. The dye-sensitized photoanode was found to exhibit significant advantages in the simultaneous improvement of charge separation and suppression of charge recombination. First, LiBr as a redox mediator plays a critical role in charge separation, leading to an excellent excited electron injection efficiency of 95% and a high dye regeneration efficiency of 87%. Second, the predominant charge recombination pathway on the dye-sensitized photoanode is efficiently blocked by the reaction between alkene and the in situ generated bromine oxidant. As a result, the current system achieved a remarkable photocurrent density of over 4 mA cm-2 with a record-high incident photo-to-current efficiency (IPCE) of 51% and extraordinary selectivity of up to 99% for the epoxidation of a wide range of alkenes. Meanwhile, nearly 100% Faradaic efficiency for hydrogen evolution was obtained. The performance shown here exceeds that obtained by metal oxide-based semiconductor photoanodes under comparable conditions, demonstrating the great potential of dye-sensitized photoelectrodes for organic synthesis owing to their diversity and tunability.

Role of Intragap States in Sensitized Sb-Doped Tin Oxide Photoanodes for Solar Fuels Production

In view of developing photoelectrosynthetic cells which are able to store solar energy in chemical bonds, water splitting is usually the reaction of choice when targeting hydrogen production. However, alternative approaches can be considered, aimed at substituting the anodic reaction of water oxidation with more commercially capitalizable oxidations. Among them, the production of bromine from bromide ions was investigated long back in the 1980s by Texas Instruments. Herein we present optimized perylene-diimide (PDI)-sensitized antimony-doped tin oxide (ATO) photoanodes enabling the photoinduced HBr splitting with >4 mA/cm2 photocurrent densities under 0.1 W/cm2 AM1.5G illumination and 91 ± 3% faradaic efficiencies for bromine production. These remarkable results, among the best currently reported for the photoelectrochemical Br- oxidation by dye sensitized photoanodes, are strongly related to the occupancy extent of ATO's intragap (IG) states, generated upon Sb-doping, as demonstrated by comparing their performances with PDI-sensitized analogues on both undoped SnO2- and TiO2-passivated ATO scaffolds by means of (spectro)electrochemistry and electrochemical impedance spectroscopy. The architecture of the ATO-PDI photoanodic assembly was further modified via the introduction of a molecular iridium-based water oxidation catalyst, thus proving the versatility of the proposed hybrid interfaces as photoanodic platforms for photoinduced oxidations in PEC devices.

Investigation of the Excited-State Electron Transfer and Cage Escape Yields Between Halides and a Fe(III) Photosensitizer

Excited-state quenching and reduction of [Fe(phtmeimb)2]+, where phtmeimb is phenyl[tris(3-methyl-imidazolin-2-ylidene)]borate, with iodide, bromide, and chloride were studied in dichloromethane, acetonitrile, and acetonitrile/water 1:1 mixture by means of steady-state and time-resolved spectroscopic techniques. Quenching rate constants were almost diffusion-limited in dichloromethane and acetonitrile and followed the expected periodic trend, i.e., I- > Br- > Cl-. Confirmation of excited-state reductive electron transfer was only unambiguously obtained when iodide was used as a quencher. The cage escape yields, i.e., the separation of the geminate radical pair formed upon bimolecular excited-state electron transfer, were determined. These yields were larger in dichloromethane (0.079) than in acetonitrile (0.017), and no photoproduct could be observed in acetonitrile/water 1:1. This study further emphasizes that solvents with low dielectric constant are more suited for productive excited-state electron transfer using Fe(III) photosensitizers with 2LMCT excited state.

Increased solar-driven chemical transformations through surface-induced benzoperylene aggregation in dye-sensitized photoanodes

The impact of benzo[ghi]perylenetriimide (BPTI) dye aggregation on the performance of photoelectrochemical devices was explored, through imide-substitution with either alkyl (BPTI-A, 2-ethylpropyl) or bulky aryl (BPTI-B, 2,6-diisopropylphenyl) moieties, to, respectively, enable or suppress aggregation. While both dyes demonstrated similar monomeric optoelectronic properties in solution, adsorption onto mesoporous SnO2 revealed different behavior, with BPTI-A forming aggregates via π-stacking and BPTI-B demonstrating reduced aggregation in the solid state. BPTI photoanodes were tested in dye-sensitized solar cells (DSSCs) before application to dye-sensitized photoelectrochemical cells (DSPECs) for Br2 production (a strong oxidant) coupled to H2 generation (a solar fuel). BPTI-A demonstrated a twofold higher dye loading of the SnO2 surface than BPTI-B, resulting in a fivefold enhancement to both photocurrent and Br2 production. The enhanced output of the photoelectrochemical systems (with respect to dye loading) was attributed to both J- and H- aggregation phenomena in BPTI-A photoanodes that lead to improved light harvesting. Our investigation provides a strategy to exploit self-assembly via aggregation to improve molecular light-harvesting and charge separation properties that can be directly applied to dye-sensitized photoelectrochemical devices.

Metal Complexes for Dye-Sensitized Photoelectrochemical Cells (DSPECs)

Since Mallouk's earliest contribution, dye-sensitized photoelectrochemical cells (DSPECs) have emerged as a promising class of photoelectrochemical devices capable of storing solar light into chemical bonds. This review primarily focuses on metal complexes outlining stabilization strategies and applications. The ubiquity and safety of water have made its splitting an extensively studied reaction; here, we present some examples from the outset to recent advancements. Additionally, alternative oxidative pathways like HX splitting and organic reactions mediated by a redox shuttle are discussed.

Ruthenium(II) complexes with phosphonate-substituted phenanthroline ligands as reusable photoredox catalysts

Ru(II) complexes with polypyridyl ligands (2,2'-bipyridine = bpy, 1,10-phenanthroline = phen) play a central role in the development of photocatalytic organic reactions. In this work, we synthesized four mixed-ligand [Ru(phen)(bpy)2]2+-type complexes (Ru-Pcat-A) bearing two phosphonate substituents P(O)(OH)(OR) (R = H, Et) attached to the phen core at positions 3,8 (Ru-3,8PH and Ru-3,8PHEt) and 4,7 (Ru-4,7PH and Ru-4,7PHEt) of the heterocycle in high yields (87-99%) and characterized them using spectral methods. Single crystal X-ray diffraction was employed to determine the coordination mode of the ditopic phen ligand in Ru-4,7PH. This complex exists as the neutral species and forms a 1D hydrogen-bonded framework in the crystals. The light absorption characteristics were found to be similar for all complexes prepared in this work. However, the emission maxima in aqueous solutions were significantly affected by the substitution of the heterocycle, ranging from 629 nm for Ru-4,7PH to 661 nm for Ru-3,8PHEt. The emission quantum yields in Ar-saturated deionized water showed a strong dependence on the substitution pattern of the phen ligand, with maximal values reaching approximately 0.11 for Ru-4,7PHEt and Ru-4,7PH, which is twice as high as that of the classical [Ru(bpy)3]2+ complex (Ru-bpy). The photocatalytic performance of Ru-Pcat-A was investigated using visible light photoredox catalytic transformations of tertiary amines. With Ru-Pcat-A, we achieved the phosphonylation of N-aryl-1,2,3,4-tetrahydroisoquinolines (THIQs) and cyanation of THIQs and N,N-dimethylaniline in methanol, while a mixture of nitromethane/methanol (1 : 1 v/v) proved to be the optimal solvent for conducting the nitromethylation of THIQs. In the majority of the studied reactions, Ru-4,7PHEt exhibited greater efficiency compared to Ru-bpy, and it could be easily separated from the products using water extraction and reused in the next catalytic cycle. We successfully performed seven consecutive nitromethylation and phosphonylation of N-phenyl-1,2,3,4-tetrahydroisoquinoline using the recycled homogeneous photoredox catalyst.

Sustainable degradation of pollutants, generation of electricity and hydrogen evolution via photocatalytic fuel cells: An Inclusive Review

Environmental pollution and energy crisis have recently become one of the major global concerns. Insincere discharge of massive amount of organic and inorganic wastes into the aqueous bodies causes serious impact on our environment. However, these organic substances are significant sources of carbon and energy that could be sustainably utilized rather than being discarded. Photocatalytic fuel cell (PFC) is a smart and novel energy conversion device that has the ability to achieve dual benefits: degrading the organic contaminants and simultaneously generating electricity, thereby helping in environmental remediation. This article presents a detailed study of the recent advancements in the development of PFC systems and focuses on the fundamental working principles of PFCs. The degradation of various common organic and inorganic contaminants including dyes and antibiotics with simultaneous power generation and hydrogen evolution has been outlined. The impact of various operational factors on the PFC activity has also been briefly discussed. Moreover, it provides an overview of the design guidelines of the different PFC systems that has been developed recently. It also includes a mention of the materials employed for the construction of the photo electrodes and highlights the major limitations and relevant research scopes that are anticipated to be of interest in the days to come. The review is intended to serve as a handy resource for researchers and budding scientists opting to work in this area of PFC devices.

Ruthenium(II) complexes with phosphonate-substituted 1,10-phenanthroline ligands: synthesis, characterization and use in organic photocatalysis

Ru(II) complexes with polypyridyl ligands play a central role in the development of photocatalytic organic reactions. This work is aimed at the structural modification of such complexes to increase their...

On the Determination of Halogen Atom Reduction Potentials with Photoredox Catalysts

The standard one-electron reduction potentials of halogen atoms, E°'(X^•/-), and many other radical or unstable species, are not accessible through standard electrochemical methods. Here, we report the use of two Ir(III) photoredox catalysts to initiate chloride, bromide, and iodide oxidation in organic solvents. The kinetic rate constants were critically analyzed through a derived diffusional model with Marcus theory to estimate E°'(X^•/-) in propylene carbonate, acetonitrile, butyronitrile, and dichloromethane. The approximations commonly used to determine diffusional rate constants in water gave rise to serious disagreements with the experiment, particularly in high-ionic-strength dichloromethane solutions, indicating the need to utilize the exact Debye expression. The Fuoss equation was adequate for determining photocatalyst-halide association constants with photocatalysts that possessed +2, +1, and 0 ionic charges. Similarly, the work term contribution in the classical Rehm-Weller expression, necessary for E°'(X^•/-) determination, accounted remarkably well for the stabilization of the charged reactants as the solution ionic strength was increased. While a sensitivity analysis indicated that the extracted reduction potentials were all within experimental error the same, use of fixed parameters established for aqueous solution provided the periodic trend expected, E°'(I^•/-) <E°'(Br^•/-) <E°'(Cl^•/-), in all of the organic solvents investigated; however, the potentials were more closely spaced than what would have been predicted based on gas-phase electron affinities or aqueous reduction potentials. The origin(s) of such behavior are discussed that provide new directions for future research.

Inhibiting Charge Recombination in cis-Ru(NCS)2 Diimine Sensitizers with Aromatic Substituents

A series of cis-[Ru(LL)(dcbH₂)(NCS)₂] compounds, where dcbH₂ = 2,2'-bipyridine-4,4'-dicarboxylic acid and LL = 1,10-phenanthroline (Ru(phen)), 4,7-dipyrrole-1,10-phenanthroline (Ru(pyr)), 4,7-diindole-1,10-phenanthroline (Ru(ind)), or 4,7-dicarbazole-1,10-phenanthroline (Ru(cbz)), was investigated for application as sensitizers in mesoporous TiO₂ dye-sensitized solar cells (DSSCs). A systematic increase in the number of rings of the aromatic substituents at the 4,7-positions of the 1,10-phenanthroline allowed tuning of the molecular size of the sensitizers and the energy stored in the excited state while maintaining the same ground-state Ru^3+/2+ reduction potentials. These small structural changes had a significant influence on the rates and/or efficiencies of electron injection, back-electron transfer, recombination to oxidized mediators, lateral self-exchange electron transfer, and regeneration through iodide oxidation that were reflected in distinct photoelectrochemical performance of full operating DSSCs. The global efficiencies, open-circuit voltages, and short-circuit current densities of the DSSCs consistently followed the trend Ru(pyr) < Ru(ind) < Ru(phen) < Ru(cbz), and the most optimal performance of Ru(cbz) was ascribed to dramatically slower recombination to the oxidized redox mediators. Transient photovoltage and transient absorption experiments both revealed significantly slower recombination as the size of the aromatic substituents increased with Ru(cbz) providing the most promising behavior for application in dye sensitization.

Fluorinated ZnII Porphyrins for Dye-Sensitized Aqueous Photoelectrosynthetic Cells

Three perfluorinated Zn^II porphyrins were evaluated as n-type sensitizers in photoelectrosynthetic cells for HBr and water splitting. All the dyes are featured by the presence of pentafluorophenyl electron-withdrawing groups to increase the ground-state oxidation potential and differ for the nature and position of the π-conjugate linker between the core and anchoring group tasked to bind the metal oxide, in order to assess the best way of coupling with the semiconductor. A phenyl-triazole moiety was used to link the carboxylic anchoring group onto the meso position, while an ethynyl-phenyl linker was chosen to bridge carboxylic and cyanoacrylic groups onto the β-pyrrolic position. A combination of electrochemical, computational, and spectroscopic investigations confirmed the strong electron-withdrawing effect of the perfluorinated porphyrin core, which assures all the investigated dyes of the high oxidation potential required to the coupling with water oxidation catalysts (WOC). Such an electron-poor core, however, affects the charge separation character of the dyes, as demonstrated by the spatial distribution of the excited states, leading to a nonquantitative charge injection, although tilting of the molecules on the semiconductor surface could bring the porphyrin ring closer to the semiconductor, offering additional charge-transfer pathways. Indeed, all the dyes demonstrated successful in the splitting of both aqueous HBr and water, with the best results found for the SnO₂/TiO₂ photoanode sensitized with the β-substituted porphyrin equipped with a cyanoacrylic terminal group, achieving 0.4 and 0.1 mA/cm² photoanodic currents in HBr and water under visible light, respectively. The faradaic yield for oxygen evolution in the presence of an Ir^IV catalyst was over 95%, and the photoanode operation was stable for more than 1000 s. Thus, the perfluorinated porphyrins with a cyanoacrylic anchoring group at the β-position should be considered for further development to improve the charge-transfer character.

An Insulating Al2O3 Overlayer Prevents Lateral Hole Hopping Across Dye-Sensitized TiO2 Surfaces

Three chromophores of the general form [Ru(bpy')₂(4,4'-(PO₃H₂)₂-2,2'-bipyridine)]²⁺, where bpy' is 4,4'-(C(CH₃)₃)₂-2,2'-bipyridine (Ru(dtb)₂P); 4,4'-(CH₃O)₂-2,2'-bipyridine (Ru(OMe)₂P), and 2,2'-bipyridine (RuP) were anchored to mesoporous thin films of TiO₂ nanocrystallites at saturation surface coverages to investigate lateral self-exchange Ru^III/II intermolecular hole hopping in 0.1 M LiClO₄/CH₃CN electrolytes. Hole hopping was initiated by a potential step 500 mV positive of the E_1/2 (Ru^III/II) potential or by pulsed laser (532 nm, 8 ns fwhm) excitation and monitored by visible absorption chronoabsorptometry and time-resolved absorption anisotropy measurements, respectively. The hole hopping rate constant k_R extracted from the potential step data revealed self-exchange rate constants that followed the trend: TiO₂|Ru(OMe)₂P (k_et = 1.4 × 10⁶ s^-1) > TiO₂|RuP (7.1 × 10⁵ s^-1) > TiO₂|Ru(dtb)₂P (6.5 × 10⁴ s^-1). Analysis of the anisotropy data with Monte Carlo simulations provided hole hopping rate constants for TiO₂|RuP and TiO₂|Ru(dtb)₂P that were within experimental error the same as that measured with the potential step. The hole hopping rate constants were found to trend with the TiO₂(e^-)|Ru^III → TiO₂|Ru^II charge recombination rate constants. The atomic layer deposition of an ∼10 Å layer of Al₂O₃ on top of the dye-sensitized films was found to prevent hole hopping by both initiation methods even though the chromophore surface coverage exceeded the percolation threshold and excited-state injection was efficient. The dramatic hole hopping turnoff was attributed to a larger outer-sphere reorganization energy for self-exchange due to the restricted access of electrolyte to the redox active chromophores. The implications of these findings for solar energy conversion applications are discussed.

Recent advances on photocatalytic fuel cell for environmental applications-The marriage of photocatalysis and fuel cells

Environmental pollution and energy crisis have become recent worldwide concerns. Huge amounts of organic wastes are discharged into water bodies, causing serious environmental pollution. Meanwhile, these organic compounds are important carbon and energy sources that could be utilized instead of being discarded. A smart design of a photocatalytic fuel cell (PFC) can achieve double benefits: it can degrade organic pollutants and at the same time generate energy. In this review article, we discuss recent progress in the development of PFC systems, and summarize the principles for constructing advanced PFC systems. We particularly focus on the rational design of electrode materials in terms of surface, morphology, facet, and interfacial reaction engineering. The impact of important operational parameters on PFC performance is further discussed in detail. We then discuss the major limitations and opportunities for future PFCs research. The development of smart and advanced PFC systems depends on highly interdisciplinary collaborations, which require concerted efforts from the communities of materials science, chemistry, engineering, and environmental science.

Halide Photoredox Chemistry

Halide photoredox chemistry is of both practical and fundamental interest. Practical applications have largely focused on solar energy conversion with hydrogen gas, through HX splitting, and electrical power generation, in regenerative photoelectrochemical and photovoltaic cells. On a more fundamental level, halide photoredox chemistry provides a unique means to generate and characterize one electron transfer chemistry that is intimately coupled with X-X bond-breaking and -forming reactivity. This review aims to deliver a background on the solution chemistry of I, Br, and Cl that enables readers to understand and utilize the most recent advances in halide photoredox chemistry research. These include reactions initiated through outer-sphere, halide-to-metal, and metal-to-ligand charge-transfer excited states. Kosower's salt, 1-methylpyridinium iodide, provides an early outer-sphere charge-transfer excited state that reports on solvent polarity. A plethora of new inner-sphere complexes based on transition and main group metal halide complexes that show promise for HX splitting are described. Long-lived charge-transfer excited states that undergo redox reactions with one or more halogen species are detailed. The review concludes with some key goals for future research that promise to direct the field of halide photoredox chemistry to even greater heights.

Iodide Photoredox and Bond Formation Chemistry

Iodide redox chemistry is intimately coupled with the formation and breaking of chemical bonds that are relevant to emerging solar energy technologies. In this Account, recent advances in dye-sensitized iodide oxidation chemistry in organic solutions are described. Here Ru^II sensitizers with high cationic charge, tuned reduction potentials, and specific iodide receptor site(s) are shown to self-assemble in organic solvents and yield structures that rapidly oxidize iodide and generate I-I bonds when illuminated with visible light. These studies provided new insights into the fascinating behavior of our most polarizable and easily oxidized monatomic anion. Sensitized iodide photo-oxidation in CH₃CN solutions consists of two mechanistic steps. In the first step, an excited-state sensitizer oxidizes iodide (I^-) to an iodine atom (I^•) through diffusional encounters. The second step involves the reaction of I^• with I^- to form the I-I bond of diiodide, I₂^•-. The overall reaction converts a green photon into about 1.64 eV of free energy in the form of I₂^•- and the reduced sensitizer. The free energy is only transiently available, as back-electron transfer to yield ground-state products is quantitative. Interestingly, when the free energy change is near zero, iodide photo-oxidation occurs rapidly with rate constants near the diffusion limit, i.e., >10¹⁰ M^-1 s^-1. Such rapid reactivity is in line with anecdotal knowledge that iodide is an outstanding electron donor and is indicative of adiabatic electron transfer through an inner-sphere mechanism. In low-dielectric-constant solvents, dicationic Ru^II sensitizers were found to form tight ion pairs with iodide. Diimine ligands with additional cationic charge, or "binding pockets" that recognize halides, have been utilized to position one or more halides at specific locations about the sensitizer before light absorption. Diverse photochemical reactions observed with these supramolecular assemblies range from the photorelease of halides to the formation of I-I bonds where both iodides present in the ground-state assembly react. Natural population analysis through density functional theory calculations accurately predicts the site(s) of iodide ion-pairing and provides information on the associated free energy change. The ability to direct light-driven bond formation in these ionic assemblies is extended to chloride and bromide ions. The structure-property relationships identified, and those that continue to emerge, may one day allow for the rational design of molecules and materials that drive desired halide transformations when illuminated with light.