Thermogel Loaded with Low-Dose Paclitaxel as a Facile Coating to Alleviate Periprosthetic Fibrous Capsule Formation

Development of a fish oil-nanoemulsion gel as a drug-delivery system to prevent capsular contracture

Capsular contracture, a significant complication of breast-implant surgery, causes pain and deformation following the formation of a tight capsule around an implant. Current surgical and non-surgical treatment options are invasive, expensive, and typically administered for prolonged periods, potentially leading to side effects. To address these challenges, we developed a novel fish oil-encapsulated, poloxamer-based nanoemulsion gel with omega-3 (ω3) as the primary active component (NE-ω3 gel; N3G). This formulation can be injected during surgery, reducing the need for prolonged administration of medications and minimizing associated side effects. N3G was prepared through a two-step process involving the emulsification of fish oil followed by gelation with poloxamer to create a thermoreversible gel. Dynamic light-scattering analysis confirmed a uniform distribution of nanoemulsion particles, which had a mean diameter of 287 ± 8.599 nm and a PDI of 0.29 ± 0.047. FTIR and DSC analyses validated the encapsulation of fish oil within poloxamer micelles. Drug-release analysis demonstrated that more than 96% of fish oil was released within 10 h. In in vivo experiments, rats (n = 30) were divided into three groups: a negative control group (G1), a positive control group receiving fish oil (G2), and an experimental group with implants coated with N3G (G3). G3 exhibited a 21.2% reduction in capsular thickness compared to G1 and a 5.6% reduction compared to G2. In addition, significant decreases in fibrosis and myofibroblast counts were observed in G3. These results, supported by histological and gene expression analyses, highlight the effectiveness of N3G in reducing inflammation and fibrosis. This study underscores the therapeutic potential of N3G for capsular contracture, based on its persistence, thermoreversibility, and improved dosing and storage characteristics.

Decoding the "Fingerprint" of Implant Materials: Insights into the Foreign Body Reaction

Foreign body reaction (FBR) is a prevalent yet often overlooked pathological phenomenon, particularly within the field of biomedical implantation. The presence of FBR poses a heavy burden on both the medical and socioeconomic systems. This review seeks to elucidate the protein "fingerprint" of implant materials, which is generated by the physiochemical properties of the implant materials themselves. In this review, the activity of macrophages, the formation of foreign body giant cells (FBGCs), and the development of fibrosis capsules in the context of FBR are introduced. Additionally, the relationship between various implant materials and FBR is elucidated in detail, as is an overview of the existing approaches and technologies employed to alleviate FBR. Finally, the significance of implant components (metallic materials and non-metallic materials), surface CHEMISTRY (charge and wettability), and physical characteristics (topography, roughness, and stiffness) in establishing the protein "fingerprint" of implant materials is also well documented. In conclusion, this review aims to emphasize the importance of FBR on implant materials and provides the current perspectives and approaches in developing implant materials with anti-FBR properties.

Surface Functional Modification by Ti3 C2 Tx MXene on PLLA Nanofibers for Optimizing Neural Stem Cell Engineering

Optimizing cell substrates by surface modification of neural stem cells (NSCs), for efficient and oriented neurogenesis, represents a promising strategy for treating neurological diseases. However, developing substrates with the advanced surface functionality, conductivity, and biocompatibility required for practical application is still challenging. Here, Ti3 C2 Tx MXene is introduced as a coating nanomaterial for aligned poly(l-lactide) (PLLA) nanofibers (M-ANF) to enhance NSC neurogenesis and simultaneously tailor the cell growth direction. Ti3 C2 Tx MXene treatment provides a superior conductivity substrate with a surface rich in functional groups, hydrophilicity, and roughness, which can provide biochemical and physical cues to support NSC adhesion and proliferation. Moreover, Ti3 C2 Tx MXene coating significantly promotes NSC differentiation into both neurons and astrocytes. Interestingly, Ti3 C2 Tx MXene acts synergistically with the alignment of nanofibers to promote the growth of neurites, indicating enhanced maturation of these neurons. RNA sequencing analysis further reveals the molecular mechanism by which Ti3 C2 Tx MXene modulates the fate of NSCs. Notably, surface modification by Ti3 C2 Tx MXene mitigates the in vivo foreign body response to implanted PLLA nanofibers. This study confirms that Ti3 C2 Tx MXene provides multiple advantages for decorating the aligned PLLA nanofibers to cooperatively improve neural regeneration.

The recent advancement in the PLGA-based thermo-sensitive hydrogel for smart drug delivery

To date, hydrogels have opened new prospects for potential applications for drug delivery. The thermo-sensitive hydrogels have the great potential to provide more effective and controllable release of therapeutic/bioactive agents in response to changes in temperature. PLGA is a safe FDA-approved copolymer with good biocompatibility and biodegradability. Recently, PLGA-based formulation have attracted a lot of interest for thermo-sensitive hydrogels. Thermo-sensitive PLGA-based hydrogels provide the delivery system with good spatial and temporal control, and have been widely applied in drug delivery. This review is focused on the recent progression of the thermo-sensitive and biodegradable PLGA-based hydrogels that have been reported for smart drug delivery to the different organs. Eventually, future perspectives and challenges of thermo-sensitive PLGA-based hydrogels are discussed briefly.

Improved paclitaxel delivery with PEG-b-PLA/zein nanoparticles prepared via flash nanoprecipitation

Polymeric micelle is a promising vehicle to improve the bioavailability and clinical outcomes of paclitaxel (PTX) which has been proven effective in the treatment of a wide range of cancers. However, conventional PTX formulation with the amphiphilic PEG-b-PLA usually suffers from insufficient PTX loading, low stability of PTX-micelles, and rapid PTX release due to low compatibility between PTX and PLA, limiting its clinical application. In this study, a novel nanoparticle platform was developed to improve the stability of PTX-loaded nanoparticles (NPs) and the delivery efficacy of PTX by integrating the flash nanoprecipitation (FNP) technique and a combination of amphiphilic PEG-PLA and super hydrophobic zein. The incorporation of zein led to the formation of distinct hydrophobic interiors of NPs which enhanced the interaction between PTX and NPs, therefore improving the encapsulation efficiency of PTX and sustained drug release compared with PEG-PLA micelles without zein. In addition, FNP allowed facile fabrication of PTX-NPs with smaller sizes and higher stability. These PTX-NPs showed superior sustained release of PTX and good cancer cell-killing in vitro. Among them, PTX-5k-16k-1Z NPs exhibited excellent biosafety and anti-tumor efficacy in a xenograft tumor model in mice, suggesting great potential in the delivery of hydrophobic drugs for cancer therapy.

Long-term anti-inflammatory effects of injectable celecoxib nanoparticle hydrogels for Achilles tendon regeneration

The treatment of chronic Achilles tendonitis (AT) often requires prolonged therapy and invasive therapeutic methods such as surgery or therapeutic endoscopy. To prevent the progression of chronic AT, excessive inflammation must be alleviated at an early stage. Corticosteroids or nonsteroidal anti-inflammatory drugs are generally prescribed to control inflammation; however, the high doses and long therapeutic periods required may lead to serious side effects. Herein, a local injectable poly(organophosphazene) (PPZ) - celecoxib (CXB) nanoparticle (PCNP) hydrogel system with long-term anti-inflammatory effects was developed for the treatment of tendonitis. The amphiphilic structure and thermosensitive mechanical properties of PPZ means that the hydrophobic CXB can be easily incorporated into the hydrophobic core to form PCNP at 4 °C. Following the injection of PCNP into the AT, PCNP hydrogel formed at body temperature and induced long-term local anti-inflammatory effects via sustained release of the PCNP. The therapeutic effects of the injectable PCNP system can alleviate excessive inflammation during the early stages of tissue damage and boost tissue regeneration. This study suggests that PCNP has significant potential as a long-term anti-inflammatory agent through sustained nonsteroidal anti-inflammatory drugs (NSAIDs) delivery and tissue regeneration boosting. STATEMENT OF SIGNIFICANCE: In the treatment of Achilles tendinitis, a long-term anti-inflammatory effect is needed to alleviate excessive inflammation and induce regeneration of the damaged Achilles tendon. Injectable poly(organophosphazene)(PPZ)-celecoxib(CXB) nanoparticles (PCNP) generated a long-term, localized-anti-inflammatory effect in the injected region, which successfully induced the expression of anti-inflammatory cytokines and suppressed pro-inflammatory cytokines, while the PCNPs degraded completely. Accordingly, regeneration of the damaged Achilles tendon was achieved through the long-term anti-inflammatory effect induced by a single PCNP injection. The PCNP system therefore has great potential in long-term NSAIDs delivery for various tissue engineering applications.

Low-dose paclitaxel modulates the cross talk between the JNK and Smad signaling in primary biliary fibroblasts

OBJECTIVE

The objective of this study was to explore the molecular mechanism underlying the occurrence of benign bile duct stricture and the target of low-dose paclitaxel in the prevention of benign bile duct stricture.

METHODS

Under the stimulation of transforming growth factor beta 1, the expression of collagen type I and connective tissue growth factor were detected on isolated primary fibroblasts. The phosphorylation levels of JNK and Smad2L were detected using Western blot. The effect of low-dose paclitaxel on the transforming growth factor beta 1-induced inhibition of type I collagen and connective tissue growth factor expression and JNK and Smad2L phosphorylation was also observed.

RESULTS

Transforming growth factor beta 1 induced the secretion of type I collagen and connective tissue growth factor as well as JNK phosphorylation in biliary fibroblasts. The JNK inhibitor or siRNA-Smad2 inhibited the transforming growth factor beta 1-induced secretion of type I collagen and connective tissue growth factor. Low-dose paclitaxel inhibited the expression of type I collagen induced by transforming growth factor beta 1 and may inhibit the secretion of collagen in biliary fibroblasts.

CONCLUSION

The activation of JNK/Smad2L induced by transforming growth factor beta 1 is involved in the occurrence of benign bile duct stricture that is mediated by the overexpression of type I collagen and connective tissue growth factor, and low-dose paclitaxel may inhibit the phosphorylation of JNK/Smad2L.

PEG-based thermosensitive and biodegradable hydrogels

Injectable thermosensitive hydrogels are free-flowing polymer solutions at low or room temperature, making them easy to encapsulate the therapeutic payload or cells via simply mixing. Upon injection into the body, in situ forming hydrogels triggered by body temperature can act as drug-releasing reservoirs or cell-growing scaffolds. Finally, the hydrogels are eliminated from the administration sites after they accomplish their missions as depots or scaffolds. This review outlines the recent progress of poly(ethylene glycol) (PEG)-based biodegradable thermosensitive hydrogels, especially those composed of PEG-polyester copolymers, PEG-polypeptide copolymers and poly(organophosphazene)s. The material design, performance regulation, thermogelation and degradation mechanisms, and corresponding applications in the biomedical field are summarized and discussed. A perspective on the future thermosensitive hydrogels is also highlighted. STATEMENT OF SIGNIFICANCE: Thermosensitive hydrogels undergoing reversible sol-to-gel phase transitions in response to temperature variations are a class of promising biomaterials that can serve as minimally invasive injectable systems for various biomedical applications. Hydrophilic PEG is a main component in the design and fabrication of thermoresponsive hydrogels due to its excellent biocompatibility. By incorporating hydrophobic segments, such as polyesters and polypeptides, into PEG-based systems, biodegradable and thermosensitive hydrogels with adjustable properties in vitro and in vivo have been developed and have recently become a research hotspot of biomaterials. The summary and discussion on molecular design, performance regulation, thermogelation and degradation mechanisms, and biomedical applications of PEG-based thermosensitive hydrogels may offer a demonstration of blueprint for designing new thermogelling systems and expanding their application scope.

Light-Triggered In Situ Gelation of Hydrogels using 2D Molybdenum Disulfide (MoS2 ) Nanoassemblies as Crosslink Epicenter

Light-responsive biomaterials are an emerging class of materials used for developing noninvasive, noncontact, precise, and controllable biomedical devices. Long-wavelength near-infrared (NIR) radiation is an attractive light source for in situ gelation due to its higher penetration depth and minimum side effects. The conventional approach to obtain crosslinked biomaterials relies heavily on the use of a photoinitiator by generating reactive species when exposed to short-wavelength radiation, which is detrimental to surrounding cells and tissue. Here, a new class of NIR-triggered in situ gelation system based on defect-rich 2D molybdenum disulfide (MoS2 ) nanoassemblies and thiol-functionalized thermoresponsive polymer in the absence of a photoinitiator is introduced. Exposure to NIR radiation activates the dynamic polymer-nanomaterials interactions by leveraging the photothermal characteristics of MoS2 and intrinsic phase transition ability of the thermoresponsive polymer. Specifically, upon NIR exposure, MoS2 acts as a crosslink epicenter by connecting with multiple polymeric chains via defect-driven click chemistry. As a proof-of-concept, the utility of NIR-triggered in situ gelation is demonstrated in vitro and in vivo. Additionally, the crosslinked gel exhibits the potential for NIR light-responsive release of encapsulated therapeutics. These light-responsive biomaterials have strong potential for a range of biomedical applications, including artificial muscle, smart actuators, 3D/4D printing, regenerative medicine, and therapeutic delivery.

Injectable Thermogel Generated by the "Block Blend" Strategy as a Biomaterial for Endoscopic Submucosal Dissection

Endoscopic submucosal dissection is an established method for the removal of early cancers and large lesions from the gastrointestinal tract but is faced with the risk of perforation. To decrease this risk, a submucosal fluid cushion (SFC) is needed clinically by submucosal injection of saline and so on to lift and separate the lesion from the muscular layer. Some materials have been tried as the SFC so far with disadvantages. Here, we proposed a thermogel generated by the "block blend" strategy as an SFC. This system was composed of two amphiphilic block copolymers in water, so it was called a "block blend". We synthesized two non-thermogellable copolymers poly(d,l-lactide-co-glycolide)-b-poly(ethylene glycol)-b-poly(d,l-lactide-co-glycolide) and blended them in water to achieve a sol-gel transition upon heating in both pure water and physiological saline. We explored the internal structure of the resultant thermogel with transmission electron microscopy, three-dimensional light scattering, ¹³C NMR, fluorescence resonance energy transfer, and rheological measurements, which indicated a percolated micelle network. The biosafety of the synthesized copolymer was preliminarily confirmed in vitro. The main necessary functions as an SFC, namely, injectability of a sol and the maintained mucosal elevation as a gel after injection, were verified ex vivo. This study has revealed the internal structure of the block blend thermogel and illustrated its potential application as a biomaterial. This work might be stimulating for investigations and applications of intelligent materials with both injectability and thermogellability of tunable phase-transition temperatures.

Exploration of possible cell chirality using material techniques of surface patterning

Consistent left-right (LR) asymmetry or chirality is critical for embryonic development and function maintenance. While chirality on either molecular or organism level has been well established, that on the cellular level has remained an open question for a long time. Although it remains unclear whether chirality exists universally on the cellular level, valuable efforts have recently been made to explore this fundamental topic pertinent to both cell biology and biomaterial science. The development of material fabrication techniques, surface patterning, in particular, has afforded a unique platform to study cell-material interactions. By using patterning techniques, chirality on the cellular level has been examined for cell clusters and single cells in vitro in well-designed experiments. In this review, we first introduce typical fabrication techniques of surface patterning suitable for cell studies and then summarize the main aspects of preliminary evidence of cell chirality on patterned surfaces to date. We finally indicate the limitations of the studies conducted thus far and describe the perspectives of future research in this challenging field. STATEMENT OF SIGNIFICANCE: While both biomacromolecules and organisms can exhibit chirality, it is not yet conclusive whether a cell has left-right (LR) asymmetry. It is important yet challenging to study and reveal the possible existence of cell chirality. By using the technique of surface patterning, the recent decade has witnessed progress in the exploration of possible cell chirality within cell clusters and single cells. Herein, some important preliminary evidence of cell chirality is collected and analyzed. The open questions and perspectives are also described to promote further investigations of cell chirality in biomaterials.

Sustained intrathecal delivery of amphotericin B using an injectable and biodegradable thermogel

Cryptococcal meningitis is a fungal infectious disease with a poor prognosis and high mortality. Amphotericin B (AMB) is the first choice for the treatment of cryptococcal meninges. The blood-brain barrier (BBB) is the major barrier for the effective delivery of drugs to the brain. In this study, AMB was incorporated in a thermosensitive gel for intrathecal injection. We first synthesized AMB-loaded thermogel, investigated its in vitro cumulative release, and in vivo neurotoxicity, and therapeutic effect. The thermosensitive gel was comprised of 25 wt% poly (lactic acid-co-glycolic acid)-poly (ethylene glycol)-poly (lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) triblock polymer aqueous solution. The AMB loaded in the thermosensitive gel (AMB in gel) had low viscosity at low temperature and resulted in the formation of a non-flowing gel at 37 °C (physiological temperature). AMB loading in gel sustained its release for 36 days and the in vitro cumulative release rate was satisfactory. Compared with the AMB solution, intrathecal administration of AMB in gel could reduce the neurovirulence of AMB and get a better treatment effect. The findings of the current study show that the injectable PLGA–PEG–PLGA thermogel is a biocompatible carrier for the delivery of drugs into the intrathecal.

ROS-Sensitive Degradable PEG-PCL-PEG Micellar Thermogel

A reactive oxygen species (ROS)-sensitive degradable polymer would be a promising material in designing a disease-responsive system or accelerating degradation of polymers with slow hydrolysis kinetics. Here, a thermogelling poly(ethylene glycol)-polycaprolactone-poly(ethylene glycol) (PEG-PCL-PEG or EG₁₂ -CL₂₀ -EG₁₂ ) triblock copolymer with an oxalate group at the middle of the polymer is reported. The polymers form micelles with an average size of 100 nm in water. Thermogelation is observed in a concentration range of 8.0-37.0 wt%. In particular, the aqueous PEG-PCL-PEG triblock copolymer solutions are in a gel state at 37 °C in a concentration range of 25.0-37.0 wt%, whereas the aqueous PEG-PCL diblock copolymer solutions are in a sol state in the same concentration range at 37 °C. Thus, the gel depot could dissolve out once degradation of the triblock copolymers occurs at the oxalate group as confirmed by the in vitro experiment. In vivo gel formation is confirmed by injecting an aqueous PEG-PCL-PEG solution (36.0 wt%) into the subcutaneous layer of rats. The gel completely disappears in 21 d. A model polypeptide drug (cyclosporine A) is released over 21 d from the in situ formed gel. The micelle-based thermogel of PEG-PCL-PEG with ROS-triggering degradability is a promising injectable material for biomedical applications.

An injectable thermosensitive hydrogel loaded with an ancient natural drug colchicine for myocardial repair after infarction

Localized administration of anti-inflammatory agents benefits patients after myocardial infarction (MI) by repressing/modulating inflammatory response of the MI region and thus accelerating repair of the impaired tissues. Colchicine (Col), an ancient natural drug, has excellent anti-inflammatory effects; however, its utilization is strictly limited due to its severe systemic toxicity and narrow therapeutic window. In this study, we developed an intramyocardial delivery system of Col using an injectable, thermosensitive poly(lactide-co-glycolide)-poly(ethylene glycol)-poly(lactide-co-glycolide) (PLGA-PEG-PLGA) polymer hydrogel as the vehicle for the treatment of MI while minimizing its systemic toxicity. The aqueous PLGA-PEG-PLGA solution loaded with Col (Col@Gel) underwent a sol-gel transition at 35 °C and maintained a gel state at body temperature. Col was released from the Col@Gel in an initial burst followed by a sustained release manner for over 8 days. The in vitro cell tests showed that the Col@Gel system significantly inhibited macrophage proliferation and migration. In a mouse model of MI, a single intramyocardial administration of the Col@Gel effectively alleviated cardiac inflammation, inhibited myocardial apoptosis and fibrosis, improved cardiac function and structure, and increased mouse survival without inducing severe systemic toxicity, which was observed following intraperitoneal administration of Col solution. These results suggested that the Col@Gel system is a reliable drug delivery system for the sustained local release of Col and has great potential as an anti-inflammatory therapy for the treat of MI.

Thermogelling chitosan-based polymers for the treatment of oral mucosa ulcers

Current treatments for oral mucosa-related ulcers use drugs to relieve pain and promote healing, but rarely consider drug resistance to bacterial infection in the microenvironment of the oral cavity or the prevention of bleeding from gingival mucosa ulcers. We herein report an injectable, thermogelling chitosan-based system to address these concerns. An aqueous solution of chitosan-based conjugates (chitosan-g-poly(N-isopropylacrylamide) [CS-g-PNIPAAM] including 1a [CS-g-PNIPAAM with less PNIPAAM] and 1b [CS-g-PNIPAAM with more PNIPAAM], and chitosan-g-poly(N-isopropylacrylamide)-g-polyacrylamide [CS-g-PNIPAAM-g-PAM] 3) could reversibly form semi-solid gels at physiological temperatures for easy application to oral cavity ulcer sites by injection. The chitosan-based conjugate thermogels prepared could inhibit both Gram-positive and Gram-negative bacteria and the two with higher chitosan and poly(N-isopropylacrylamide) contents (1a and 1b) promoted proliferation of gingival fibroblasts in vitro. These two thermogels also exhibited improved blood clotting in an in vivo rat study. Thermogels 1a and 1b effectively promoted ulcer healing and shortened ulcer healing times in an oral gingival mucosa ulcer model using Sprague Dawley (SD) rats. These thermogels showed no obvious toxicity to the main organs of SD rats undergoing gingival ulcer treatment. These results suggest that this antibacterial biomaterial could be a promising injectable therapeutic agent for the treatment for oral mucosa ulcers.

Tailoring Surface Hydrophilicity Property for Biomedical 316L and 304 Stainless Steels: A Special Perspective on Studying Osteoconductivity and Biocompatibility

Stainless steels used as metal implants in the medical field have been attracting intensive attention due to their advantages in mechanical properties, anticorrosion properties, and cost effectiveness. Good osteoconductivity, low toxicity, and low inflammatory reactions are essential to stainless steel implant in vivo. However, there are few cases about the surface modification performed for enhancing the corrosion resistance, and there are few researches on the relationship between the surface properties of stainless steel and osteoconductivity when used as implants. This study employed 316L and 304 stainless steel for surface modification including hydrothermal treatment after acid immersion and anodizing treatment, while the as-polished stainless steel was used as a control group. Anticorrosion properties, protein adsorption properties, osteoconductivity, and anti-inflammation property of these specimens were intensively investigated in vitro and in vivo. It was found that specimen subjected to hydrothermal treatment at 230 °C after immersion in 18 M H₂SO₄ had the lowest metal ions release, while the anodized specimen had the highest release of Fe and Cr due to corrosion. The protein adsorption amount of the specimens was positively related to the osteoconductivity, suggesting protein adsorption is the prerequisite for good osteoconductivity. The osteoconductivity decreased first and then increased with the increase in water contact angle (WCA) value. The specimen with the surface modified by hydrothermal treatment after acid immersion had the highest protein adsorption amount and the best osteoconductivity due to its superhydrophilicity property. The protein adsorption capacity and osteoconductivity for stainless steel tended to be the same as Ti alloys studied before, indicating the surface hydrophilicity property of the implanted metals was the dominant factor affecting the osteoconductivity. From an anti-inflammation perspective, the specimen with the surface modified by hydrothermal treatment after acid immersion also exhibited the lowest thickness of the fibrous capsule membrane from the in vivo tests, suggesting its advantageous biocompatibility. Thus, this research can provide new insight into the application of austenitic stainless steel for implanted material purposes.

Co-delivery of metformin and levofloxacin hydrochloride using biodegradable thermosensitive hydrogel for the treatment of corneal neovascularization

Corneal neovascularization (CNV) is one of the major causes of severe disorders in ocular surface. Subconjunctival administration provides a localized and effective delivery of anti-angiogenic agents to inhibit neovascularization. In the present study, the ABA triblock copolymer of poly(D,L-lactic-co-glycolic acid)-block-poly(ethylene glycol)-block-poly(D,L-lactic-co-glycolic acid) (PLGA-PEG-PLGA) was used as a sustained drug delivery carrier for metformin (MET) and levofloxacin hydrochloride (LFH). Both drugs and PLGA-PEG-PLGA copolymers could be easily dissolved in water at low or room temperature and the mixed solution could form a drug-loaded thermosensitive hydrogel in terms of body temperature response. The in vitro release investigation displayed a sustained release of MET and LFH from the formulation for one month. The in vivo efficacy of subconjunctival injection of the MET + LFH loaded thermosensitive hydrogel in inhibiting CNV was evaluated on a mouse model of corneal alkali burn. Compared with the single administration of MET or LFH loaded thermosensitive hydrogel, the MET + LFH loaded thermosensitive hydrogel remarkably inhibited the formation of CNV. The sustained release of MET and an antibiotic (LFH) provides synergistic therapeutic outcome. As a result, the co-delivery of MET and LFH using PLGA-PEG-PLGA thermosensitive hydrogel by subconjunctival injection has great potential for ocular anti-angiogenic therapy.

Double-Network Polyurethane-Gelatin Hydrogel with Tunable Modulus for High-Resolution 3D Bioprinting

Three-dimensional (3D) bioprinting is a technology to print materials (bioink) with cells into customized tissues for regeneration or organoids for drug screening applications. Herein, a series of biodegradable polyurethane (PU)-gelatin hydrogel with tunable mechanical properties and degradation rates were developed as the bioink. The PU-gelatin hydrogel demonstrated good printability in 24-31 °C and could print a complicated structure such as the nose-shaped construct. Due to the excellent shear thinning and fast strain recovery properties, the PU-gelatin hydrogel also had long working windows for bioprinting (over 24 h), stacking ability (up to 80 layers), and feasibility for high-resolution printing (through an 80 μm nozzle). The structure stability of the PU-gelatin hydrogel was maintained by two-stage double-network formation through Ca²⁺ chelation and thermal gelation at 37 °C without any toxic cross-linking reagent. The compressive modulus of printed PU-gelatin hydrogel constructs increased in about 3-fold by the treatment of CaCl₂ solution for 15 min and enhanced further after incubation because of the thermal sensitivity of PU at 37 °C. Mesenchymal stem cells (MSCs) printed with the PU-gelatin hydrogel through the 80 μm nozzle showed good viability, high mobility, and ∼200% proliferation ratio (or an ∼300% proliferation ratio through a 200 μm nozzle) in 10 days. Furthermore, the MSC-laden PU-gelatin constructs containing small molecular drug Y27632 underwent chondrogenesis in 10 days. The novel series of PU-gelatin hydrogels with tunable modulus, long working window, convenient bioprinting process, and high-resolution printing possibilities may serve as new bioink for 3D bioprinting of various tissues.

Sustained Release Strategy Designed for Lixisenatide Delivery to Synchronously Treat Diabetes and Associated Complications

Diabetes and its complications have become a global challenge of public health. Herein, we aimed to develop a long-acting delivery system of lixisenatide (Lixi), a glucose-dependent antidiabetic peptide, based on an injectable hydrogel for the synchronous treatment of type 2 diabetes mellitus (T2DM) and associated complications. Two triblock copolymers, poly(ε-caprolactone-co-glycolic acid)-poly(ethylene glycol)-poly(ε-caprolactone-co-glycolic acid) and poly(d,l-lactic acid-co-glycolic acid)-poly(ethylene glycol)-poly(d,l-lactic acid-co-glycolic acid) possessing temperature-induced sol-gel transitions, were synthesized by us. Compared to the two single-component hydrogels, their 1/1 mixture hydrogel not only maintained the temperature-induced gelation but also exhibited a steadier degradation profile in vivo. Both in vitro and in vivo release studies demonstrated that the mixture hydrogel provided the sustained release of Lixi for up to 9 days, which was attributed to balanced electrostatic interactions between the positive charges in the peptide and the negative charges in the polymer carrier. The hypoglycemic efficacy of Lixi delivered from the mixture hydrogel after a single subcutaneous injection into diabetic db/db mice was comparable to that of twice-daily administrations of Lixi solution for up to 9 days. Furthermore, three successive administrations of the abovementioned gel system within a month significantly increased the plasma insulin level, lowered glycosylated hemoglobin, and improved the pancreatic function of the animals. These results were superior or equivalent to those of twice-daily injections of Lixi solution for 30 days, but the number of injections was markedly reduced from 60 to 3. Finally, an improvement in hyperlipidemia, augmentation of nerve fiber density, and enhancement of motor nerve conduction velocity in the gel formulation-treated db/db mice indicated that the sustained delivery of Lixi arrested and even ameliorated diabetic complications. These findings suggested that the Lixi-loaded mixture hydrogel has great potential for the treatment of T2DM with significant improvements in the health and quality of life of patients.

Polydopamine-mediated covalent functionalization of collagen on a titanium alloy to promote biocompatibility with soft tissues

The clinical success of a titanium (Ti) percutaneous implant requires the integration with soft tissues to form a biological seal, which effectively combats marsupialization, premigration and infection after implantation. However, the bioinert surface of Ti or its alloys prevents the material from sufficient biological sealing and limits the application of Ti or its alloys as percutaneous implants. In this study, we achieved a collagen coating to bioactivate the surface of Ti-6Al-4V. In order to enable covalent functionalization, we first deposited a polydopamine (PDA) coating on Ti-6Al-4V based on dopamine self-polymerization and then immobilized collagen chains on PDA. Compared with physical absorption, such a chemical bonding method through mussel-inspired chemistry showed better stability of the coating. Meanwhile, the cellular tests in vitro indicated that collagen functionalization on the Ti-6Al-4V surface showed better adhesion of human foreskin fibroblasts (HFFs) and human immortal keratinocytes (HaCaTs). The subcutaneous implantation tests in rats indicated that the collagen modification attenuated soft tissue response and improved tissue compatibility compared with either pure Ti-6Al-4V or merely PDA coated samples. The facile bioinspired approach enables a persistent modification of metals by macromolecules under aqueous environments, and the PDA-collagen coated titanium alloy is worthy of further investigation as a percutaneous implant.