Coloration of Liquid-Metal Soft Robots: From Silver-White to Iridescent

Liquid Metal as Energy Conversion Sensitizers: Materials and Applications

Energy can exist in nature in a wide range of forms. Energy conversion refers to the process in which energy is converted from one form to another, and this process will be greatly enhanced by energy conversion sensitizers. Recently, an emerging class of new materials, namely liquid metals (LMs), shows excellent prospects as highly versatile materials. Notably, in terms of energy delivery and conversion, LMs functional materials are chemical responsive, heat-responsive, photo-responsive, magnetic-responsive, microwave-responsive, and medical imaging responsive. All these intrinsic virtues enabled promising applications in energy conversion, which means LMs can act as energy sensitizers for enhancing energy conversion and transport. Herein, first the unique properties of the light, heat, magnetic and microwave converting capacity of gallium-based LMs materials are summarized. Then platforms and applications of LM-based energy conversion sensitizers are highlighted. Finally, some of the potential applications and opportunities of LMs are prospected as energy conversion sensitizers in the future, as well as unresolved challenges. Collectively, it is believed that this review provides a clear perspective for LMs mediated energy conversion, and this topic will help deepen knowledge of the physical chemistry properties of LMs functional materials.

Antiswelling Photochromic Hydrogels for Underwater Optically Camouflageable Flexible Electronic Devices

Optical camouflage offers an effective strategy for enhancing the survival chances of underwater flexible electronic devices akin to underwater organisms. Photochromism is one of the most effective methods to achieve optical camouflage. In this study, antiswelling hydrogels with photochromic properties were prepared using a two-step solvent replacement strategy and explored as underwater optically camouflaged flexible electronic devices. The hydrophobic network formed upon polymerization of hydroxyethyl methacrylate (HEMA) ensured that the hydrogels possessed outstanding antiswelling properties. Internetwork hydrogen bonding interactions allowed the hydrogels to exhibit tissue-adaptable mechanical properties and excellent self-bonding capabilities. The introduction of polyoxometalates further enhanced the hydrogels' mechanical and self-bonding properties while imparting photochromic capability. The hydrogels could be rapidly and reversibly colored under 365 nm UV irradiation. The bleaching rate of the colored hydrogels increased with temperature, bleaching within 12 h at 60 °C but maintaining the color for more than 5 days at room temperature. The self-bonding and photochromic properties enabled the hydrogels to be easily assembled into optically camouflaged underwater flexible electronic devices for underwater motion sensing and wireless information transmission. An optically camouflaged strain sensor was first assembled for underwater limb motion sensing. Additionally, an underwater optically camouflaged wireless information exchange device was assembled to enable wireless communication with a smartphone. This work provided an effective strategy for the optical camouflage of underwater flexible electronic devices, presenting opportunities for next-generation underwater hydrogel-based flexible devices.

Real-time coloration control of gallium-based strips through cold rolling

Cold rolling has been used as a real-time surface oxidation control method to create colored strips on flexible substrates. By controlling the extrusion rate in real time, a variety of colored strips have been fabricated on Ga-based liquid metal (LM) strips. X-ray photoelectron spectroscopy (XPS) analysis shows that the surfaces of the colored strips, which were obtained through extrusion rate control of LM-Al, consist primarily of metal oxide composites, including Ga2O3, Ga2O, Al2O3, SnO2, and In2O3. The colors of the strip surfaces are directly correlated with the oxide film thickness. Additionally, these cold-rolled colored thin strips demonstrate high conductivity and have significant potential for use as conductive flexible components with indicator functions in the flexible electronics realm.

Room-Temperature Liquid Metals for Flexible Electronic Devices

Room-temperature gallium-based liquid metals (RT-GaLMs) have garnered significant interest recently owing to their extraordinary combination of fluidity, conductivity, stretchability, self-healing performance, and biocompatibility. They are ideal materials for the manufacture of flexible electronics. By changing the composition and oxidation of RT-GaLMs, physicochemical characteristics of the liquid metal can be adjusted, especially the regulation of rheological, wetting, and adhesion properties. This review highlights the advancements in the liquid metals used in flexible electronics. Meanwhile related characteristics of RT-GaLMs and underlying principles governing their processing and applications for flexible electronics are elucidated. Finally, the diverse applications of RT-GaLMs in self-healing circuits, flexible sensors, energy harvesting devices, and epidermal electronics, are explored. Additionally, the challenges hindering the progress of RT-GaLMs are discussed, while proposing future research directions and potential applications in this emerging field. By presenting a concise and critical analysis, this paper contributes to the advancement of RT-GaLMs as an advanced material applicable for the new generation of flexible electronics.

Liquid Metal Combinatorics toward Materials Discovery

Liquid metals and their derivatives provide several opportunities for fundamental and practical exploration worldwide. However, the increasing number of studies and shortage of desirable materials to fulfill different needs also pose serious challenges. Herein, to address this issue, a generalized theoretical frame that is termed as "Liquid Metal Combinatorics" (LMC) is systematically presented, and summarizes promising candidate technical routes toward new generation material discovery. The major categories of LMC are defined, and eight representative methods for manufacturing advanced materials are outlined. It is illustrated that abundant targeted materials can be efficiently designed and fabricated via LMC through deep physical combinations, chemical reactions, or both among the main bodies of liquid metals, surface chemicals, precipitated ions, and other materials. This represents a large class of powerful, reliable, and modular methods for innovating general materials. The achieved combinatorial materials not only maintained the typical characteristics of liquid metals but also displayed distinct tenability. Furthermore, the fabrication strategies, wide extensibility, and pivotal applications of LMC are classified. Finally, by interpreting the developmental trends in the area, a perspective on the LMC is provided, which warrants its promising future for society.

Combined three dimensional locomotion and deformation of functional ferrofluidic robots

Magnetic microrobots possess remarkable potential for targeted applications in the medical field, primarily due to their non-invasive, controllable properties. These unique qualities have garnered increased attention and fascination among researchers. However, these robotic systems do face challenges such as limited deformation capabilities and difficulties navigating confined spaces. Recently, researchers have turned their attention towards magnetic droplet robots, which are notable for their superior deformability, controllability, and potential for a range of applications such as automated virus detection and targeted drug delivery. Despite these advantages, the majority of current research is constrained to two-dimensional deformation and motion, thereby limiting their broader functionality. In response to these limitations, this study proposes innovative strategies for controlling deformation and achieving a three-dimensional (3D) trajectory in ferrofluidic robots. These strategies leverage a custom-designed eight-axis electromagnetic coil and a sliding mode controller. The implementation of these methods exhibits the potential of ferrofluidic robots in diverse applications, including microfluidic pump systems, 3D micromanipulation, and selective vascular occlusion. In essence, this study aims to broaden the capabilities of ferrofluidic robots, thereby enhancing their applicability across a multitude of fields such as medicine, micromanipulation, bioengineering, and more by maximizing the potential of these intricate robotic systems.

Breakup-Free and Colorful Liquid Metal Thin Films via Electrochemical Oxidation

Thin-film metal conductors featuring high conductivity and stretchability are basic building blocks for high-performance conformable electronics. Gallium-based liquid metals are attractive candidates for thin-film conductors due to their intrinsic stretchability and ease of processing. Moreover, the phase change nature of liquid metal provides an opportunity to create conformal electronics in a substrate-free manner. However, thin liquid metal films tend to break during the solid-to-liquid transition due to the high surface tension of liquid metal. Here, we created breakup-free liquid metal thin films by the electrochemical oxidation of solid gallium films. We show that electrochemical oxidation can enhance the mechanical strength of the gallium oxide layer and its interfacial adhesion to the gallium core. When heated to the liquid state, the oxidized gallium films can maintain their structural integrity on various solid substrates, hydrogels, and even the water surface. The solid-liquid phase change-induced stiffness decrease allowed the gallium films to be conformably attached to various nonplanar surfaces upon heating or water transfer printing. Moreover, we also found that enhanced electrochemical oxidation can result in the formation of structure color due to nanoporous structures on the film surface. We also demonstrate the applications of oxidized liquid metal films in functional electronics, electrophysiological monitoring, and tattoo art.

Surface Oxidation and Wetting Synergistic Effect of Liquid Metals

Various functions of liquid metals are closely related to their surface performances, among which oxidation and wetting are the two most important surface processes. The two processes of liquid metals are inseparable in most practical applications; however, the coupling of oxidation and wetting of liquid metals has received little attention. Here, we demonstrate the synergistic effect of oxidation and wetting of liquid metals through establishing a liquid system containing the copper ion acid solution. By modulating the concentrations of copper ions and hydrogen ions, three different modes of the liquid metal surface are presented, where the oxidation process and the wetting process are in a competitive relationship. Whichever of the two processes is dominant can determine the stability of copper particles produced on the surface of liquid metals, that is, affect whether the "phagocytosis" process can occur. It is revealed that the magnitude of current density on the surface of liquid metals, caused by galvanic corrosion behavior between liquid metals and copper particles, is the key factor influencing the dominance of different surface processes of liquid metals. Utilizing the synergistic effect, we prepare a liquid metal film with adjustable reflectivity, in which surface states can be changed repeatedly between the bright state and the darken state by simple solution immersion. The liquid metal film with different surface states can show obvious difference in optical performance, which has application potential in color camouflage. Understanding the surface synergistic effect will facilitate further exploration of the abundant exotic liquid metal interface phenomena.

Electrochemical Oxidation to Fabricate Micro-Nano-Scale Surface Wrinkling of Liquid Metals

Constructing wrinkled structures on the surface of materials to obtain new functions has broad application prospects. Here a generalized method is reported to fabricate multi-scale and diverse-dimensional oxide wrinkles on liquid metal surfaces by an electrochemical anodization method. The oxide film on the surface of the liquid metal is successfully thickened to hundreds of nanometers by electrochemical anodization, and then the micro-wrinkles with height differences of several hundred nanometers are obtained by the growth stress. It is succeeded in altering the distribution of growth stress by changing the substrate geometry to induce different wrinkle morphologies, such as one-dimensional striped wrinkles and two-dimensional labyrinth wrinkles. Further, radial wrinkles are obtained under the hoop stress induced by the difference in surface tensions. These hierarchical wrinkles of different scales can exist on the liquid metal surface simultaneously. Surface wrinkles of liquid metal may have potential applications in the future for flexible electronics, sensors, displays, and so on.

Recent progress in fiber-based soft electronics enabled by liquid metal

Soft electronics can seamlessly integrate with the human skin which will greatly improve the quality of life in the fields of healthcare monitoring, disease treatment, virtual reality, and human-machine interfaces. Currently, the stretchability of most soft electronics is achieved by incorporating stretchable conductors with elastic substrates. Among stretchable conductors, liquid metals stand out for their metal-grade conductivity, liquid-grade deformability, and relatively low cost. However, the elastic substrates usually composed of silicone rubber, polyurethane, and hydrogels have poor air permeability, and long-term exposure can cause skin redness and irritation. The substrates composed of fibers usually have excellent air permeability due to their high porosity, making them ideal substrates for soft electronics in long-term applications. Fibers can be woven directly into various shapes, or formed into various shapes on the mold by spinning techniques such as electrospinning. Here, we provide an overview of fiber-based soft electronics enabled by liquid metals. An introduction to the spinning technology is provided. Typical applications and patterning strategies of liquid metal are presented. We review the latest progress in the design and fabrication of representative liquid metal fibers and their application in soft electronics such as conductors, sensors, and energy harvesting. Finally, we discuss the challenges of fiber-based soft electronics and provide an outlook on future prospects.

Liquid Metal-Assisted High-Efficiency Exfoliation of Boron Nitride for Electrically Insulating Heat-Spreader Film

Boron nitride nanosheets (BNNSs) are regarded as promising two-dimensional materials in thermally conductive yet electrically insulating applications. Attributed to the strong interlayer "lip-lip" interactions in bulk hexagonal boron nitride (h-BN), high-efficiency exfoliation and scalable fabrication of BNNSs via the top-down strategies remain formidable challenges. Herein, an interesting observation is manifested that gallium-based liquid metal (LM) forming robust coordination interactions with h-BN helps reduce the lip-lip interlayer interactions and thus facilitates successful exfoliation under intense shearing force. For example, employing the ball-milling technique, the BNNS yield can increase to 41.21% with the assistance of LM at only 2 h milling time. Its exfoliation efficiency (yield/time) reaches as high as 26.72%/h, more than 2-fold that of other previously reported methods, including sonication and other ball-milling methods. Moreover, the exfoliated BNNSs are still found to be highly electrically insulating with a band gap of 4.65 eV, showing prospective potential in thermally conductive yet electrical insulating applications. As a proof of concept, a microwave-transparent heat spreader (cellulose nanofiber/BNNSs) is fabricated and verified for applications in high-frequency thermal-management fields.

Transportable, Endurable, and Recoverable Liquid Metal Powders with Mechanical Sintering Conductivity for Flexible Electronics and Electromagnetic Interference Shielding

Liquid metals (LMs, e.g., EGaIn) promise a vast potential in accelerating the development of flexible electronics, smart robots, and wearable and biomedical devices. Although a variety of emerging processing methods are reported, they suffer several risks (e.g., leakage, weak adhesion, and low colloidal and chemical stability) because of their excellent fluidity, high surface tension, and rapid oxidation. Herein, liquid metal powders (LMPs) are fabricated based on a versatile method by vigorously stirring EGaIn with nonmetallic or organic particles through interfacial interactions. During the mixing process, EGaIn microdroplets are wrapped with a nonmetallic or an organic shell by electrostatic adsorption, and a more sticky oxide layer is constantly generated and then broken owing to the shearing friction. These transportable powders exhibit superior stability under extreme conditions (e.g., water and high temperature), being capable of recovering electrical conductivity and strong adhesion on different substrates upon mechanical sintering. A flexible, robust, and conductive coating can be constructed via swabbing with an integrated Joule heating effect and excellent electromagnetic interference shielding performances, and it is applicable in flexible wearable electronics, microcircuits, and wireless power transmission systems.

New Strategy and Excellent Fluorescence Property of Unique Core-Shell Structure Based on Liquid Metals/Metal Halides

The further applications of liquid metals (LMs) are limited by their common shortcoming of silver-white physical appearance, which deviates from the impose stringent requirements for color and aesthetics. Herein, a concept is proposed for constructing fluorescent core-shell structures based on the components and properties of LMs, and metal halides. The metal halides endow LMs with polychromatic and stable fluorescence characteristics. As a proof-of-concept, LMs-Al obtained by mixing of LMs with aluminum (Al) is reported. The surface of LMs-Al is transformed directly from Al to a multi-phase metal halide of K₃ AlCl₆ with double perovskites structure, via redox reactions with KCl + HCl solution in a natural environment. The formation of core-shell structure from the K₃ AlCl₆ and LMs is achieved, and the shell with different phases can emit a cyan light by the superimposition of the polychromatic spectrum. Furthermore, the LMs can be directly converted into a fluorescent shell without affecting their original features. In particular, the luminescence properties of shells can be regulated by the components in LMs. This study provides a new direction for research in spontaneous interfacial modification and fluorescent functionalization of LMs and promises potential applications, such as lighting and displays, anti-counterfeiting measures, sensing, and chameleon robots.

Unique Surface Fluorescence Induced from the Core-Shell Structure of Gallium-Based Liquid Metals Prepared by Thermal Oxidation Processing

Liquid metals (LMs) have emerged as promising functional materials that combine the properties of both liquid and metal. These characteristics enabled them to find applications in many fields. However, the LMs usually can only display a silver-white physical appearance, which limits their further applications in the fields with the imposition of stringent requirements for color and aesthetics. Herein, we report that the surface of LMs was transformed directly from metal to fluorescent semiconductor layer by an example of eutectic GaInSn (eGaInSn) induced by thermal oxidation. Specifically, a core-shell structure is formed from the fluorescent layer and the LMs. The shell endows the LMs with fluorescence without affecting their interior fluidity and conductivity. In particular, the formation process as well as the degree of crystallization, phase transformation, and light emission of the fluorescent oxide shell on the surface of LMs is regulated by the component content. A thorough analysis of surface morphology, composition, structure, and properties of the fluorescent shell suggests that the Ga₂O₃ layer is formed on the surface of gallium-based LMs after their immersion in deionized water. Subsequently, thermal oxidation results in the formation of the β-Ga₂O₃ shell on the surface of liquid metals. Importantly, abundant oxygen vacancies (V_O) in β-Ga₂O₃ as the donors and the gallium vacancies (V_Ga), gallium-oxygen vacancy pairs (V_O-V_Ga), defect energy levels, and intrinsic defects as the acceptors enabled the light emission. The fluorescent LMs have promising potential for flexible lighting and displays, anticounterfeiting measures, sensing, and chameleon robots.

Ga Based Particles, Alloys and Composites: Fabrication and Applications

Liquid metal (LM) materials, including pure gallium (Ga) LM, eutectic alloys and their composites with organic polymers and inorganic nanoparticles, are cutting-edge functional materials owing to their outstanding electrical conductivity, thermal conductivity, extraordinary mechanical compliance, deformability and excellent biocompatibility. The unique properties of LM-based materials at room temperatures can overcome the drawbacks of the conventional electronic devices, particularly high thermal, electrical conductivities and their fluidic property, which would open tremendous opportunities for the fundamental research and practical applications of stretchable and wearable electronic devices. Therefore, research interest has been increasingly devoted to the fabrication methodologies of LM nanoparticles and their functional composites. In this review, we intend to present an overview of the state-of-art protocols for the synthesis of Ga-based materials, to introduce their potential applications in the fields ranging from wearable electronics, energy storage batteries and energy harvesting devices to bio-applications, and to discuss challenges and opportunities in future studies.

Single Particle Color Switching by Laser-Induced Deformation of Liquid Metal-derived Microcapsules

Active controlling of optical properties of metallic particles holds great promise for nonlinear nanophotonics and compact optoelectronic devices. Except for the electronic and chemical tuning of their properties, active control through fast and reversible shape modulation remains a significant challenge. Here, we report on the concept for changing the color and brightness of single particles by reversible/irreversible tuning of their shapes. As a family of plasmonic materials with low melting points and high flexibility, we synthesized liquid metal microparticles with different interior (dense/hollow) and morphology from Ga and its alloys (GaNi, GaCu). Utilizing near-infrared femtosecond laser pulses, we achieve two regimes for reversible/irreversible optical tuning due to consequent weak/strong perturbation of the microcapsules (MC) shapes. The chemical composition and MCs morphology significantly affect the tuning of color and brightness, as well as the rigidity of the MCs to extreme laser conditions.

Hydrochromic Visualization of a Keggin-Type Structure Triggered by Metallic Fluids for Liquid Displays, Reversible Writing, and Acidic Environment Detection

Hydrochromic visualization of a liquid interface shows vital potential applications in liquid displays, reversible writing, and acidic environmental detection, which offers a platform for detection and forewarning due to its intuitive and visual characteristics. Herein, we report a hydrochromic display due to the interfacial effect of liquid metal (LM)-triggered ammonium metatungstate (AMT) with instant dual-mode color switching. The double-electron-transfer reaction of the AMT on the surface of gallium-based LM caused the formation of heteropoly blue in the presence of acidic surroundings, resulting in a reversible color switching from being colorless to blue or blue to colorless. This visual interfacial discoloration phenomenon can be applied to the liquid display on diverse patterns of the LM surface. Furthermore, papers with a functional display were prepared, which can be used for writing up to eight times with dual-mode color switching. In addition, the reactive activity of acid triggering make it a potential candidate for use in visualizing an acidic environment with a detection range of pH = 1 to 0 (0.1-1.5 M). Briefly, this interfacial discoloration phenomenon enriches the interfacial engineering of LM and provides a unique prospective and wide-range platform for the application of LM.

Eutectics: formation, properties, and applications

Various eutectic systems have been proposed and studied over the past few decades. Most of the studies have focused on three typical types of eutectics: eutectic metals, eutectic salts, and deep eutectic solvents. On the one hand, they are all eutectic systems, and their eutectic principle is the same. On the other hand, they are representative of metals, inorganic salts, and organic substances, respectively. They have applications in almost all fields related to chemistry. Their different but overlapping applications stem from their very different properties. In addition, the proposal of new eutectic systems has greatly boosted the development of cross-field research involving chemistry, materials, engineering, and energy. The goal of this review is to provide a comprehensive overview of these typical eutectics and describe task-specific strategies to address growing demands.

Shape- and Color-Switchable Polyurethane Thermochromic Actuators Based on Metal-Containing Ionic Liquids

Many creatures have excellent control over their form, color, and morphology, allowing them to respond to the interaction of environmental stimuli better. Here, the bioinspired synergistic shape-color-switchable actuators based on thermally induced shape-memory triethanolamine cross-linked polyurethane (TEAPU) and thermochromic ionic liquids (ILs) were prepared. The thermochromic ILs with various metalized anions, including bis(1-butyl-3-methylimidazolium) tetrachloro nickelate ([Bmim]₂[NiCl₄]) and bis(1-butyl-3-methylimidazolium) tetrachloride cobalt ([Bmim]₂[CoCl₄]), are investigated. The actuators exhibit thermochromic response, as evidenced by a shift in the color of the composites, which is due to the formation of the tetrahedral complex MCl₄^2- (M = Ni and Co) after dehydration. The shape-color-switchable thermochromic actuators have strong molecular interaction between TEAPU and ILs and can mimic natural flowers and change the color and shape quickly in a narrow temperature range (30-70 °C). In addition, these thermochromic actuators can lift more than 50 times their weight and withstand strains of more than 1100%. The results represent the potential application in artificial muscle actuators and intelligent camouflages.

Liquid Metal Foaming via Decomposition Agents

As an emerging functional material, the liquid metal has demonstrated its encouraging potential in several areas with practical trials, while its global uniformity including high density and limited macroscopic interface might become a barrier for some tough application scenarios. Here, we proposed the concept of liquid metal foaming via decomposition agents, aiming to develop a generalized way to make porous foam metallic fluid, which would pave the way in achieving more structured features and adaptability of liquid metals. By introducing a greenness strategy with the help of an ecofriendly foaming agent, we realized a series of designed targeted liquid metal foams (LMFs). Compared with common liquid metals, LMFs possess many excellent properties, such as abundant interfaces, tunable conductivity, and adjustable stiffness, due to the controllable regulation of their porous structure. According to these unique characteristics, diversified values of LMFs were obtained. Benefiting from the naturally enriched interface in LMFs, the hydrogen evolution of LMFs in neutral deionized water was more efficient and more productive. Additionally, the compact LMF-air battery with high performance was originally manufactured. Moreover, the tunable LMF-enabled four-dimensional (4D) electromagnetic shielding materials possess excellent shielding performance. This material could open up broad vistas for the application of LMs.

Manipulating metals for adaptive thermal camouflage

Many species in nature have evolved remarkable strategies to visually adapt to the surroundings for the purpose of protection and predation. Similarly, acquiring the capabilities of adaptively camouflaging in the infrared (IR) spectrum has emerged as an intriguing but highly challenging technology in recent years. Here, we report adaptive thermal camouflage devices by bridging the optical and radiative properties of nanoscopic platinum (Pt) films and silver (Ag) electrodeposited Pt films. Specifically, these metal-based devices have large, uniform, and consistent IR tunabilities in mid-wave IR (MWIR) and long-wave IR (LWIR) atmospheric transmission windows (ATWs). Furthermore, these devices can be easily multiplexed, enlarged, applied to rough and flexible substrates, or colored, demonstrating their multiple adaptive camouflaging capabilities. We believe that this technology will be advantageous not only in various adaptive camouflage platforms but also in many thermal radiation management-related technologies.

NIR-UV Responsive Actuator with Graphene Oxide/Microchannel-Induced Liquid Crystal Bilayer Structure for Biomimetic Devices

Soft bilayer actuators with a simple fabrication process, diverse molecular alignment, and multistimulus response are displayed in this work. The microchannel method proposed by us can exquisitely program the molecular arrangement. Based on the mismatch in coefficient of thermal expansion (CTE) between graphene oxide (GO) and the azobenzene doped liquid crystal network (ALCN), bilayer actuators can exhibit reversible, rapid, and complex deformations under the control of heat, UV and NIR light. Furthermore, in addition to microchannels, various deformation behaviors of bilayer actuators can also be programmed by directionally arranging GO layers. Smart bilayer membranes can be customized into a range of delicate biomimetic devices, such as bionic butterfly, bionic leaf, and foot robot, promising their numerous applications in biomimetic and intelligent soft robotics fields.

Discoloration Effect and One-Step Synthesis of Hydrogen Tungsten and Molybdenum Bronze (H x MO3) using Liquid Metal at Room Temperature

This paper presents a new route to one-step fabrication and in situ application of hydrogen tungsten and molybdenum bronze (H _x MO₃) at room temperature and triggers the interdisciplinary research of multifunctional materials between liquid metal and transition-metal oxides (TMOs). Gallium-based liquid metal (GBLM) enables the discoloration effect on TMOs in acid electrolytes at ambient temperature. The underlying mechanism behind this phenomenon can be ascribed to the redox effect at the interface of liquid metal and TMOs in acid electrolytes. Both the theoretical calculations and the experimental results demonstrate that the increasing intercalation of H⁺ ions into the lattice of WO₃ raises the electron density at the Fermi level and charge carriers. H⁺ ion content in the obtained H _x MO₃ can be controlled in our approach to meet different requirements. Taking advantage of the one-step fabrication and room-temperature liquid phase nature of the liquid metal, H _x MO₃ is synthesized under ambient conditions in a very short time, which is inaccessible with conventional solution-processed mechanical alloying, or other methods. The H _x MO₃ obtained in this one-step approach enables convenient and simple applications for biomimetic camouflage, cost-effective energy storage, H⁺ ion sensor, and electronic switch.