Designing pH-Responsive Biodegradable Polymer Coatings for Controlled Drug Release via Vapor-Based Route

Biodegradable Polymers in Biomedical Applications: A Review-Developments, Perspectives and Future Challenges

Biodegradable polymers are materials that, thanks to their remarkable properties, are widely understood to be suitable for use in scientific fields such as tissue engineering and materials engineering. Due to the alarming increase in the number of diagnosed diseases and conditions, polymers are of great interest in biomedical applications especially. The use of biodegradable polymers in biomedicine is constantly expanding. The application of new techniques or the improvement of existing ones makes it possible to produce materials with desired properties, such as mechanical strength, controlled degradation time and rate and antibacterial and antimicrobial properties. In addition, these materials can take virtually unlimited shapes as a result of appropriate design. This is additionally desirable when it is necessary to develop new structures that support or restore the proper functioning of systems in the body.

Ultrathin hierarchical hydrogel-carbon nanocomposite for highly stretchable fast-response water-proof wearable humidity sensors

Wearable humidity sensors play an important role in human health monitoring. However, challenges persist in realizing high performance wearable humidity sensors with fast response and good stretchability and durability. Here we report wearable humidity sensors employing an ultrathin micro-nano hierarchical hydrogel-carbon nanocomposite. The nanocomposite is synthesized on polydimethylsiloxane (PDMS) films via a facile two-step solvent-free approach, which creates a hierarchical architecture consisting of periodic microscale wrinkles and vapor-deposited nanoporous hydrogel-candle-soot nanocoating. The hierarchical surface topography results in a significantly enlarged specific surface area (>107 times that of planar hydrogel), which along with the ultrathin hydrogel endow the sensor with high sensitivity and a fast response/recovery (13/0.48 s) over a wide humidity range (11-96%). Owing to the wrinkle structure and interpenetrating network between the hydrogel and PDMS, the sensor is stable and durable against repeated 180° bending, 100% strain, and even scratching. Furthermore, encapsulation of the sensor imparts excellent resistance to water, sweat, and bacteria without influencing its performance. The sensor is then successfully used to monitor different human respiratory behaviors and skin humidity in real time. The reported method is convenient and cost-effective, which could bring exciting new opportunities in the fabrication of next-generation wearable humidity sensors.

Plug-and-Play Biointerfaces: Harnessing Host-Guest Interactions for Fabrication of Functional Polymeric Coatings

Polymeric surface coatings capable of effectively integrating desired functional molecules and ligands are attractive for fabricating bio-interfaces necessary for various applications. Herein, we report the design of a polymeric platform amenable to such modifications in a modular fashion through host-guest chemistry. Copolymers containing adamantane (Ada) moieties, diethylene glycol (DEG) units, and silyloxy groups to provide functionalization handles, anti-biofouling character, and surface attachment, respectively, were synthesized. These copolymers were employed to modify silicon/glass surfaces to enable their functionalization using beta-cyclodextrin (βCD) containing functional molecules and bioactive ligands. Moreover, surface functionalization could be spatially controlled using a well-established technique like microcontact printing. Efficient and robust functionalization of polymer-coated surfaces was demonstrated by immobilizing a βCD-conjugated fluorescent rhodamine dye through the specific noncovalent binding between Ada and βCD units. Furthermore, biotin, mannose, and cell adhesive peptide-modified βCD were immobilized onto the Ada-containing polymer-coated surfaces to direct noncovalent conjugation of streptavidin, concanavalin A (ConA), and fibroblast cells, respectively. It was demonstrated that the mannose-functionalized coating could selectively bind to the target lectin ConA, and the interface could be regenerated and reused several times. Moreover, the polymeric coating was adaptable for cell attachment and proliferation upon noncovalent modification with cell-adhesive peptides. One can envision that the facile synthesis of the Ada-based copolymers, mild conditions for coating surfaces, and their effective transformation to various functional interfaces in a modular fashion offers an attractive approach to engineering functional interfaces for several biomedical applications.

Hyperbranched Copolymers of Methacrylic Acid and Lauryl Methacrylate H-P(MAA-co-LMA): Synthetic Aspects and Interactions with Biorelevant Compounds

The synthesis of novel copolymers using one-step reversible addition-fragmentation chain transfer (RAFT) copolymerization of biocompatible methacrylic acid (MAA), lauryl methacrylate (LMA), and difunctional ethylene glycol dimethacrylate (EGDMA) as a branching agent is reported. The obtained amphiphilic hyperbranched H-P(MAA-co-LMA) copolymers are molecularly characterized by size exclusion chromatography (SEC), FTIR, and ¹H-NMR spectroscopy, and subsequently investigated in terms of their self-assembly behavior in aqueous media. The formation of nanoaggregates of varying size, mass, and homogeneity, depending on the copolymer composition and solution conditions such as concentration or pH variation, is demonstrated by light scattering and spectroscopic techniques. Furthermore, drug encapsulation properties are studied by incorporating the low bioavailability drug, curcumin, in the nano-aggregate hydrophobic domains, which can also act as a bioimaging agent. The interaction of polyelectrolyte MAA units with model proteins is described to examine protein complexation capacity relevant to enzyme immobilization strategies, as well as explore copolymer self-assembly in simulated physiological media. The results confirm that these copolymer nanosystems could provide competent biocarriers for imaging and drug or protein delivery/enzyme immobilization applications.

Elastomeric, bioadhesive and pH-responsive amphiphilic copolymers based on direct crosslinking of poly(glycerol sebacate)-co-polyethylene glycol

Poly(glycerol sebacate) (PGS), a synthetic biorubber, is characterised by its biocompatibility, high elasticity and tunable mechanical properties; however, its inherent hydrophobicity and insolubility in water make it unsuitable for use in advanced biomaterials like hydrogels fabrication. Here, we developed new hydrophilic PGS-based copolymers that enable hydrogel formation through use of two different types of polyethylene glycol (PEG), polyethylene glycol (PEG2) or glycerol ethoxylate (PEG3), combined at different ratios. A two-step polycondensation reaction was used to produce poly(glycerol sebacate)-co-polyethylene glycol (PGS-co-PEG) copolymers that were then crosslinked thermally without the use of initiators or crosslinkers, resulting in PGS-co-PEG2 and PGS-co-PEG3 amphiphilic polymers. It has been illustrated that the properties of PGS-co-PEG copolymers can be controlled by altering the type and amount of PEG. PGS-co-PEG copolymers containing PEG ≥ 40% showed high swelling, flexibility, stretching, bioadhesion and biocompatibility, and good enzymatic degradation and mechanical properties. Also, the addition of PEG created hydrogels that demonstrated pH-responsive behaviours, which can be used for bioapplications requiring responding to physicochemical dynamics. Interestingly, PGS-co-40PEG2 and PGS-co-60PEG3 had the highest shear strengths, 340.4 ± 49.7 kPa and 336.0 ± 35.1 kPa, and these are within the range of commercially available sealants or bioglues. Due to the versatile multifunctionalities of these new copolymer hydrogels, they can have great potential in soft tissue engineering and biomedicine.

Solvent-Free Fabrication of Self-Regenerating Antibacterial Surfaces Resisting Biofilm Formation

Biofilm formation on indwelling medical devices is a major cause of hospital-acquired infections. Monofunctional antibacterial surfaces have been developed to resist the formation of biofilms by killing bacteria on contact, but the adsorption of killed bacterial cells and debris gradually undermines the function of these surfaces. Here, we report a facile approach to produce an antibacterial surface that can regenerate its function after contamination. The self-regenerating surface was achieved by sequential deposition of alternating antibacterial and biodegradable layers of coating using a solvent-free initiated chemical vapor deposition method. As the top antibacterial layer gradually loses its killing ability due to the accumulation of debris, the underlying biodegradable layer degrades, shedding off the top surface layers and exposing another fresh antibacterial surface. Urinary catheters coated with monofunctional and self-regenerating antibacterial coatings both showed more than 99% bacterial killing ability at the initial antibacterial test, but the monofunctional surface lost its killing ability after continued exposure to concentrated bacterial solution, whereas the self-regenerating surfaces regained strong bacterial killing ability after prolonged exposure. Employing poly(methacrylic anhydride) and its copolymers with varied composition as the degrading layer, the degradation kinetics can be well-tailored and the self-regeneration duration spanned from minutes to days. The designed self-regenerating antibacterial surfaces could provide an effective approach to resist biofilm formation and extend the service life of indwelling medical devices.

Controlled Release Utilizing Initiated Chemical Vapor Deposited (iCVD) of Polymeric Nanolayers

This review will focus on the controlled release of pharmaceuticals and other organic molecules utilizing polymeric nanolayers grown by initiated chemical vapor deposited (iCVD). The iCVD layers are able conform to the geometry of the underlying substrate, facilitating release from one- and two-dimensional nanostructures with high surface area. The reactors for iCVD film growth can be customized for specific substrate geometries and scaled to large overall dimensions. The absence of surface tension in vapor deposition processes allows the synthesis of pinhole-free layers, even for iCVD layers <10 nm thick. Such ultrathin layers also provide rapid transport of the drug across the polymeric layer. The mild conditions of the iCVD process avoid damage to the drug which is being encapsulated. Smart release is enabled by iCVD hydrogels which are responsive to pH, temperature, or light. Biodegradable iCVD layers have also be demonstrated for drug release.

Vapor-deposited functional polymer thin films in biological applications

Functional polymer coatings have become ubiquitous in biological applications, ranging from biomaterials and drug delivery to manufacturing-scale separation of biomolecules using functional membranes. Recent advances in the technology of chemical vapor deposition (CVD) have enabled precise control of the polymer chemistry, coating thickness, and conformality. That comprehensive control of surface properties has been used to elicit desirable interactions at the interface between synthetic materials and living organisms, making vapor-deposited functional polymers uniquely suitable for biological applications. This review captures the recent technological development in vapor-deposited functional polymer coatings, highlighting their biological applications, including membrane-based bio-separations, biosensing and bio-MEMS, drug delivery, and tissue engineering. The conformal nature of vapor-deposited coatings ensures uniform coverage over micro- and nano-structured surfaces, allowing the independent optimization of surface and bulk properties. The substrate-independence of CVD techniques enables facile transfer of surface characteristics among different applications. The vapor-deposited functional polymer thin films tend to be biocompatible because they are free of remnant toxic solvents and precursor molecules, potentially lowering the barrier to clinical success.

Design and evaluation of pH-responsive hydrogel for oral delivery of amifostine and study on its radioprotective effects

The purpose of this study was to develop a novel pH-sensitive hydrogel which was used to regulate the acute radiation syndrome (ARS). The hydrogel was fabricated by grafting polycaprolactone onto methacrylic acid copolymer (MAC-g-PCL). Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (¹H NMR) confirmed the obtaining of MAC-g-PCL hydrogel. The hydrogel was pH-sensitive, at pH 1.2, it was compact hydrogel, but at pH7.4, it was dissolved solution. Its inner 3D morphology was observed by scanning electron microscope (SEM). Cell experiments indicated that the MAC-g-PCL hyrogel was out of cytotoxicity. The release profile of amifostine showed that small amount drug release in simulated gastric fluid (pH 1.2) and burst release in simulated intestinal fluid (pH 7.4). Thus, the pH-sensitive hydrogels could protect amifostine from enzymatic degradation in acidic stomach and deliver effectively in the intestine. The radioprotective efficacy was determined by peripheral complete blood parameters and 30-day survival study in mice acutely exposed to 4 Gy γ-ray total body irradiation. Results suggested that oral administration MAC-g-PCL/Ami before total body irradiation protected the mice from hematopoietic ARS and enhanced their survival. Furthermore, in vivo bio-distribution studies indicated that the drug could be sustained delivered at intestinal tract and entered the bloodstream. These results demonstrated that oral administration of amifostine hydrogel provided effective radioprotection to reduce the ARS injury.

Initiated Chemical Vapor Deposition of Graded Polymer Coatings Enabling Antibacterial, Antifouling, and Biocompatible Surfaces

We report initiated chemical vapor deposition of model-graded polymer coatings enabling antibacterial, antifouling, and biocompatible surfaces. The graded coating was constructed by a bottom layer consisting of bactericidal poly(dimethyl amino methyl styrene) and a surface layer consisting of both dimethyl amino methyl styrene (DMAMS) and hydrophilic vinyl pyrrolidone (VP) moieties. Fourier transform infrared spectra showed existence of both DMAMS and VP in the coating with DMAMS as the major component, while X-ray photoelectron spectroscopy analysis and water contact angle measurement revealed a VP-enriched coating surface. The resultant coating exhibited more than 99.9% killing rate against both Gram-negative Escherichia coli and Gram-positive Bacillus subtilis despite the incorporation of VP on the surface. We believe that such bactericidal capability resulted because of its high surface zeta potential, which could be originated from the DMAMS units distributed both on the top surface and underneath. The graded coating achieved more than 85% bacterial fouling resistance than the pristine substrate, as well as improved biocompatibility, owing to the abundant surface lactam groups from the VP moiety. Furthermore, the graded coating maintained good bactericidal capability after multicycle challenges of bacterial solutions and was durable against continuous rigorous washing, suggesting potential applications in biomedical devices.

Sulfonate modified Lactoferrin nanoparticles as drug carriers with dual activity against HIV-1

Intriguing properties and structural dynamics of Lactoferrin have been exploited in numerous applications, including its use as self-assembling, pH sensitive nanoparticles to deliver intended cargo at the disease site. In this study, we explore the possibility of surface modification of Lactoferrin nanoparticles to hone its specificity to target HIV-1 infected cells. Existence of free cysteine groups on Lactoferrin nanoparticles available for reaction with external molecules facilitates conjugation on the surface with Sodium 2-mercaptoethanesulfonate (MES). Conjugation with MES is used to edge a negative charge that can mimic CCR5 and Heparan sulfate (initial point of contact of HIV-1 env to host cell surface) electrostatic charge (Sulfate group). A simple sono-chemical irradiation method was employed for self-assembly of Nanoparticles and for surface modification. The nanoparticles serve dual purpose to abrogate extracellular entry and to target viral enzymes, when loaded with ART drugs. The morphology and size distribution of the formed particles were explored using Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM) and Dynamic Light Scattering. Raman SERS was employed to understand the difference in the protein upon surface modification. The anti-HIV property of the particles was confirmed in-vitro. The modified device demonstrated acceptable nanoparticle properties with controlled release and higher effective concentration in the area of infection.

Degradation of Polymer Films on Surfaces: A Model Study with Poly(sebacic anhydride)

There is compelling evidence that the degradation kinetics of thin polymer films differ significantly from those of bulk materials, as interfacial effects become dominant. Therefore, it is crucial to investigate these kinetics separately. Qualitative analytics of thin film degradation exist, e.g. by scanning electron microscopy or atomic force microscopy (AFM), but a quantitative study is so far missing. In this work, poly(sebacic anhydride) (PSA), an aliphatic polyanhydride, is used as a model system for a quantitative degradation study. PSA was spin-coated onto silicon or gold substrates. The degradation of these PSA films was monitored by ellipsometry, surface-plasmon resonance spectroscopy (SPR), and Fourier transform infrared spectroscopy (FTIR). Two kinetic regimes were observed when plotting the relative layer thickness determined by FTIR and SPR against the degradation time. The data obtained by FTIR showed a single process for the rate of ester bond cleavage. Overall, the degradation rate constants of PSA determined by the different methods were consistent. The degradation rate constants of PSA film up to 378 nm thickness were constant. Several thicker free-standing samples studied gravimetrically had a degradation rate constant that was one order of magnitude slower, thus confirming thickness-dependent degradation rate constants.