"Electron-Sharing" Mechanism Promotes Co@Co3O4/CNTs Composite as the High-Capacity Anode Material of Lithium-Ion Battery

Self-Assembled Carbon Metal-Organic Framework Oxides Derived from Two Calcination Temperatures as Anode Material for Lithium-Ion Batteries

Owing to their structural diversity and mesoporous construction, metal-organic frameworks (MOFs) have been used as templates to prepare mesoporous metal oxides, which show excellent performance as anode materials for lithium-ion batteries (LIBs). Co-ZnO/C and Co-Co3O4/C nanohybrids were successfully synthesized based on a precursor of Co-doped MOF-5 by accurately controlling the annealing temperature and atmosphere. Experimental data proved that their electrochemical performance was closely associated with the material phase, especially for Co-ZnO/C, indicating that carbon skeleton materials can maintain a good restoration rate of over 99% after undergoing high-current density cycling. Meanwhile, Co-Co3O4/C nanohybrids showed an exceedingly high reversible capacity of 898 mAh∙g-1 at a current density of 0.1 C after 100 cycles. Their improved coulombic efficiency and superior rate capability contribute to a mesoporous structure, which provides pathways allowing for rapid Li+ diffusion and regulates volume change during charge and discharge processes.

Hierarchical architecture of ZIF-8@ZIF-67-Derived N-doped carbon nanotube hollow polyhedron supported on 2D Ti3C2Tx nanosheets targeting enhanced lithium-ion capacitors

The matching of long cycle life, high power density, and high energy density has been an inevitable requirement for the development of efficient anode materials for lithium-ion capacitors (LICs). Here, we introduce an N-doped carbon nanotube hollow polyhedron structure (Co3O4-CNT-800) with high specific surface area and active sites, which is anchored with two-dimensional (2D) Ti3C2Tx nanosheets with metallic conductivity and abundant surface functional groups by electrostatic adsorption to form a hierarchical multilevel hollow semi-covered framework structure. Benefiting from the synergistic effect between Co3O4-CNT-800 and Ti3C2Tx, the composites exhibit superior energy storage efficiency and long cycling stability. The Co3O4-CNT-800/Ti3C2Tx electrodes exhibit a high specific capacity of 817C/g at a current density of 0.5 A/g under the three-electrode system, and the capacity retention rate is 91 % after 5000 cycles at a current density of 2 A/g. Additionally, we assembled Co3O4-CNT-800/Ti3C2Tx as the anode and Activated carbon (AC) cathode to form LIC devices, which showed an electrochemical test result of 90.01 % capacitance retention after 8000 cycles at 2 A/g, and the maximum power density of the LIC was 3000 W/kg and the maximum energy density was 121 Wh/kg. This work pioneered the combination of N-doped carbon nanotube hollow polyhedron structure with two-dimensional Ti3C2Tx, which provides an effective strategy for preparing LIC negative electrode materials with high specific capacitance and long cycling stability.

Hierarchical structure promoted lithiation/delithiation behavior of a double-carbon microsphere supported nano-Co3O4 anode

Due to limited mass loading, high-capacity electrode materials such as transition metal oxides (TMOs) are essential for microscale Li-ion batteries (LIBs) integrated in nano-/micro-electromechanical systems (N/MEMS). Unfortunately, their electrochemical performances are largely plagued by severe mechanical degradation and slow electron transport. Therefore, it is crucial to develop strategies that can improve the structural stability and electronic conductivity of TMO electrodes. In this work, double-carbon (carbon nanotubes and ketjen black) microsphere (DCMS) supported Co3O4 electrodes are fabricated simply through a spray drying and solvothermal method, which are designed to have a mesoporous three-dimensional (3D) hierarchical heterostructure containing well-dispersed Co3O4 nanoparticles within the DCMS framework. An in situ transmission electron microscopy (TEM) study reveals that the DCMS framework can not only provide facile strain accommodation, but also good electronic conductivity, leading to a much improved Li-storage performance compared to other Co3O4-based anodes. The hierarchical electrode exhibits maximum charge capacities of 1205.2 and 678.1 mA h g-1 at current densities of 0.1 and 2 A g-1, respectively, as well as a capacity retention of 92.2% at 0.3 A g-1 after 100 cycles. This study provides a low-cost, simple and general method for developing advanced high-capacity electrodes.

Enhanced Interfacial Magnetization is Responsible for the Negative Capacity Fading of Cobalt Ditelluride Anodes for Lithium Storage

In lithium-ion batteries (LIBs), the stabilized capacities of transition metal compound anodes usually exhibit higher values than their theoretical values due to the interfacial charge storage, the formation of reversible electrolyte-derived surface layer, or interfacial magnetization. But the effectively utilizing the mechanisms to achieve novel anodes is rarely explored. Herein, a novel nanosized cobalt ditelluride (CoTe₂ ) anodes with ultra-high capacity and long term stability is reported. Electrochemical tests show that the lithium storage capacity of the best sample reaches 1194.7 mA h g^-1 after 150 cycles at 0.12 A g^-1 , which increases by 57.8% compared to that after 20 cycles. In addition, the sample offers capacities of 546.6 and 492.1 mA h g^-1 at 0.6 and 1.8 A g^-1 , respectively. During cycles, CoTe₂ particles (average size 20 nm) are gradually pulverized into the smaller nanoparticles (<3 nm), making the magnetization more fully due to the larger contact area of Co/Li₂ Te interface, yielding an increased capacity. The negative capacity fading is observed, and verified by ex situ structural characterizations and in situ electrochemical measurements. The proposed strategy can be further extended to obtain other high-performance ferromagnetic metal based electrodes for energy storage applications.

Hierarchical porous Co-CoO@NC hollow microspheres with capacity growth by reactivation of solid-electrolyte interface films

Transition metal oxide (TMO)-based electrodes exhibit increased capacities, yet the mechanism behind the true cause of capacity in such materials remains unclear. Herein, hierarchical porous and hollow Co-CoO@NC spheres assembled by nanorods with refined nanoparticles and amorphous carbon have been synthesized by a two-step annealing approach. A temperature gradient-driven mechanism is revealed for the evolution of the hollow structure. Compared with the solid CoO@NC spheres, the novel hierarchical of Co-CoO@NC can fully utilize the interior active material by exposing both ends of each nanorod into electrolyte. The hollow interior provides extra space for the volume variation, leading to an up-trend capacity of 919.3 mAh g^-1 at 200 mA g^-1 over 200 cycles. Differential capacity curves disclose that solid electrolyte interface (SEI) films reactivation partly contributes to increasing reversible capacity. The introduction of nanosized Co particles benefits the process by participating in the transformation of SEI components. This study provides a guide for constructing anodic material with exceptional electrochemical performance.

Purification of silicon from waste photovoltaic cells and its value-added application in lithium-ion batteries

A facile and promising method was proposed to make full use of waste photovoltaic cell natural characteristics by fabricating the PSi/Li/N@C composite as high-performance LIB anode material.

Utilization of Interfacial Charge Storage toward Ultra-high Capacity: Li2SO4 Sealed Micron Sized Iron Oxides as Anode for Lithium Batteries

The interfacial charge storage is derived from spin-polarized electrons stored on the surface of iron metal nanoparticles, and reasonable utilization can achieve a capacity far beyond the traditional conversion mechanism. Generally, iron oxide is easy to crack, pulverize, and fall off due to its poor conductivity and large volume change during cycling, and causes serious side reactions with the electrolyte. Herein, this pulverization phenomenon was intentionally utilized to in situ form nano-sized iron particles and create a large number of Fe/Li₂O interfaces. Specifically, a Li⁺ conductor like Li₂SO₄ was utilized to seal micron sized iron oxides and also work as an aggregation barrier. Thus, the in situ formed nanoparticles were separated from the electrolyte and could provide huge capacity through interfacial charge storage. Therefore, the specific capacity of this unique composite continues to rise upon activation cycling and finally reaches 1708 mA h g^-1, which is more than twice its theoretical capacity based on the conversion mechanism. The gradually increasing interfacial charge storage capacity was also directly confirmed by X-ray photoelectron spectroscopy tests. This novel strategy provides new opportunities for the design and commercialization of advanced energy storage systems.

Growth Mechanism of Micro/Nano Metal Dendrites and Cumulative Strategies for Countering Its Impacts in Metal Ion Batteries: A Review

Metal-ion batteries are capable of delivering high energy density with a longer lifespan. However, they are subject to several issues limiting their utilization. One critical impediment is the budding and extension of solid protuberances on the anodic surface, which hinders the cell functionalities. These protuberances expand continuously during the cyclic processes, extending through the separator sheath and leading to electrical shorting. The progression of a protrusion relies on a number of in situ and ex situ factors that can be evaluated theoretically through modeling or via laboratory experimentation. However, it is essential to identify the dynamics and mechanism of protrusion outgrowth. This review article explores recent advances in alleviating metal dendrites in battery systems, specifically alkali metals. In detail, we address the challenges associated with battery breakdown, including the underlying mechanism of dendrite generation and swelling. We discuss the feasible solutions to mitigate the dendrites, as well as their pros and cons, highlighting future research directions. It is of great importance to analyze dendrite suppression within a pragmatic framework with synergy in order to discover a unique solution to ensure the viability of present (Li) and future-generation batteries (Na and K) for commercial use.

Metal-Organic Framework-Derived Hierarchical MnO/Co with Oxygen Vacancies toward Elevated-Temperature Li-Ion Battery

Transition metal oxides for high-temperature lithium-ion batteries have captivated orchestrated efforts for next-generation high-energy-density anodes. However, due to inherent low tap density, poor conductivity, and structural instability, their poor cyclability capacity and rate performance at elevated temperatures hinder further implementation. Oxygen vacancies (O_v) engineered by manipulating the active sites and electrical conductivity is a promising method for superior lithium storage. Herein, hierarchical MnO/Co nanoparticle-embedded N-doped carbon nanotube (CNT)-assembled carbonaceous micropolyhedrons (O_v-MnO/Co NCPs) are constructed by a "4S" self-assembly, self-template, self-adaptive, and self-catalytic metal-organic framework template method with in situ oxygen vacancies introduced. Impressively, the internal nanoparticles with metallic Co and the external N-doped carbonaceous matrix entangled by fluffy self-generated CNTs synchronously constructed hierarchical micro/nano-secondary hybrids, facilitating highly compacted density, staggered conductive network, multidirectional diffusion pathways, and accelerated electrochemical kinetics. Experimental and density functional theory investigations systematically manifested that the O_v alongside the local built-in electric field within the crystal lattice induced the boosted electrical conductivity, additional active sites, and alleviated structural expansion, further achieving the exceptional diffusivity coefficient and pseudocapacitive capacity. Benefiting from the integrated structural and compositional optimization, the O_v-MnO/Co NCPs achieved distinguished "3C" performance with superior ultralong cyclability (a volumetric capacity of 1713.5 mAh cm^-3 at 1 A g^-1 up to 1000 cycles), good rate capacity (a well-maintained capacity of 670.2 mAh g^-1 even at 10 A g^-1), and considerable high-temperature capability at 60 °C.

Self-Templating Synthesis of Hollow Co3O4 Nanoparticles Embedded in N,S-Dual-Doped Reduced Graphene Oxide for Lithium Ion Batteries

The design and synthesis of hollow-nanostructured transition metal oxide-based anodes is of great importance for long-term operation of lithium ion batteries. Herein, we report a two-step calcination strategy to fabricate hollow Co₃O₄ nanoparticles embedded in a N,S-co-doped reduced graphene oxide framework. In the first step, core-shell-like Co@Co₃O₄ embedded in N,S-co-doped reduced graphene oxide is synthesized by pyrolysis of a Co-based metal organic framework/graphene oxide precursor in an inert atmosphere at 800 °C. The designed hollow Co₃O₄ nanoparticles with an average particle size of 25 nm and wall thickness of about 4-5 nm are formed by a further calcination process in air at 250 °C via the nanoscale Kirkendall effect. Both micropores and mesopores are generated in the HoCo₃O₄/NS-RGO framework. Benefiting from the hierarchical porous structure of the hollow Co₃O₄ and the co-doping of nitrogen and sulfur atoms in reduced graphene oxide, the thus-assembled battery exhibits a high specific capacity of 1590 mAh g^-1 after 600 charge-discharge cycles at 1 A g^-1 and a promising rate performance from 0.2 to 10 A g^-1.

Integrated Design of Hierarchical CoSnO3@NC@MnO@NC Nanobox as Anode Material for Enhanced Lithium Storage Performance

Transition-metal oxides (TMOs) are potential candidates for anode materials of lithium-ion batteries (LIBs) due to their high theoretical capacity (∼1000 mA h/g) and enhanced safety from suppressing the formation of lithium dendrites. However, the poor electron conductivity and the large volume expansion during lithiation/delithiation processes are still the main hurdles for the practical usage of TMOs as anode materials. In this work, the CoSnO3@NC@MnO@NC hierarchical nanobox (CNMN) is then proposed and fabricated to solve those issues. The as-prepared nanobox contains hollow cubic CoSnO3 as a core and dual N-doped carbon-"sandwiched" MnO particles as a shell. As anode materials of LIBs, the hollow and carbon interlayer structures effectively accommodate the volume expansion while dual active TMOs of CoSnO3 and MnO efficiently increase the specific capacity. Notably, the dual-layer structure of N-doped carbons plays a critical functional role in the incorporated composites, where the inner layer serves as a reaction substrate and a spatial barrier and the outer layer offers electron conductivity, enabling more effective involvement of active anode materials in lithium storage, as well as maintaining their high activity during lithium cycling. Subsequently, the as-prepared CNMN exhibits a high specific capacity of 1195 mA h/g after the 200th cycle at 0.1C and an excellent stable reversible capacity of about 876 mA h/g after the 300th cycle at 0.5C with only 0.07 mA h/g fade per cycle after 300 cycles. Even after a 250 times fast charging/discharging cycle both at 5C, it still retains a reversible capacity of 422.6 mA h/g. We ascribe the enhanced lithium storage performances to the novel hierarchical architectures achieved from the rational design.

Copper nanowires and copper foam multifunctional bridges in zeolitic imidazolate framework-derived anode material for superior lithium storage

Herein, a synthetic strategy for growing trimetallic zeolitic imidazolate framework (ZIF) polyhedrons on copper foam (CF) and interweaving with copper nanowires (CNWs) is proposed. Subsequently, in situ annealing under N₂ atmosphere leads to the formation of multi-doped CNWs/Cu_0.39Zn_0.14Co_2.47O₄-ZnO/CF (CNWs/CZCOZ/CF). The unique structural characteristics of CNWs/CZCOZ/CF allow it to be directly assembled as a working electrode, without additional conductive additives or binders. When it's used as the lithium-ion battery (LIB) anode, this electrode exhibits a significantly high capacity of 2305 mAh g^-1 at 0.1 A g^-1 after 500 cycles. More importantly, kinetic analysis on the basis of cyclic voltammograms (CVs) indicates that the pseudocapacitive effect is the primary contributor to the high lithium storage capacity and also accounts for the exceptionally high rate capacity of 713 mAh g^-1 even if the current density is at a maximum of 10 A g^-1. Moreover, the superior battery performance originates from their advantageous structural diversity and unique compositional features, including synergistic effects among polymetallic components and two highly conductive substrates (CNWs and CF), forming unhindered paths for fast charge transfer.

Sandwich-like Co3O4/MXene composites as high capacity electrodes for lithium-ion batteries

The synergistic effect of Co₃O₄ and Ti₃C₂T_x and the lithiation-induced refining architecture of Co₃O₄/Ti₃C₂T_x contribute to remarkable performance.

Recent Progress of Electrochemical Energy Devices: Metal Oxide–Carbon Nanocomposites as Materials for Next-Generation Chemical Storage for Renewable Energy

With the importance of sustainable energy, resources, and environmental issues, interest in metal oxides increased significantly during the past several years owing to their high theoretical capacity and promising use as electrode materials for electrochemical energy devices. However, the low electrical conductivity of metal oxides and their structural instability during cycling can degrade the battery performance. To solve this problem, studies on carbon/metal-oxide composites were carried out. In this review, we comprehensively discuss the characteristics (chemical, physical, electrical, and structural properties) of such composites by categorizing the structure of carbon in different dimensions and discuss their application toward electrochemical energy devices. In particular, one-, two-, and three-dimensional (1D, 2D, and 3D) carbon bring about numerous advantages to a carbon/metal-oxide composite owing to the unique characteristics of each dimension.

H0.92K0.08TiNbO5 Nanowires Enabling High-Performance Lithium-Ion Uptake

HTiNbO₅ has been widely investigated in many fields because of its distinctive properties such as good redox activity, high photocatalytic activity, and environmental benignancy. Here, this work reports the synthesis of one-dimensional H_0.92K_0.08TiNbO₅ nanowires via simple electrospinning followed by an ion-exchange reaction. The H_0.92K_0.08TiNbO₅ nanowires consist of many small "lumps" with a uniform diameter distribution of around 150 nm. Used as an anode for lithium-ion batteries, H_0.92K_0.08TiNbO₅ nanowires exhibit high capacity, fast electrochemical kinetics, and high performance of lithium-ion uptake. A capacity of 144.1 mA h g^-1 can be carried by H_0.92K_0.08TiNbO₅ nanowires at 0.5 C in the initial charge, and even after 150 cycles, the reversible capacity can remain at 123.7 mA h g^-1 with an excellent capacity retention of 85.84%. For H_0.92K_0.08TiNbO₅ nanowires, the diffusion coefficient of lithium ions is 1.97 × 10^-11 cm² s^-1, which promotes the lithium-ion uptake effectively. The outstanding electrochemical performance is ascribed to its morphology and the formation of a stable phase during cycling. In addition, the in situ X-ray diffraction and ex situ transmission electron microscopy techniques are applied to reveal its lithium storage mechanism, which proves the structure stability and electrochemical reversibility, thus achieving high-performance lithium-ion uptake. All these advantages demonstrate that H_0.92K_0.08TiNbO₅ nanowires can be a possible alternative anode material for rechargeable batteries.