One-Dimensional/Two-Dimensional Core-Shell-Structured Bi2O4/BiO2- x Heterojunction for Highly Efficient Broad Spectrum Light-Driven Photocatalysis: Faster Interfacial Charge Transfer and Enhanced Molecular Oxygen Activation Mechanism

Broad Spectral Response FeOOH/BiO2-x Photocatalyst with Efficient Charge Transfer for Enhanced Photo-Fenton Synergistic Catalytic Activity

In this work, to promote the separation of photogenerated carriers, prevent the catalyst from photo-corrosion, and improve the photo-Fenton synergistic degradation of organic pollutants, the coating structure of FeOOH/BiO2-x rich in oxygen vacancies was successfully synthesized by a facile and environmentally friendly two-step process of hydrothermal and chemical deposition. Through a series of degradation activity tests of synthesized materials under different conditions, it was found that FeOOH/BiO2-x demonstrated outstanding organic pollutant degradation activity under visible and near-infrared light when hydrogen peroxide was added. After 90 min of reaction under photo-Fenton conditions, the degradation rate of Methylene Blue by FeOOH/BiO2-x was 87.4%, significantly higher than the degradation efficiency under photocatalysis (60.3%) and Fenton (49.0%) conditions. The apparent rate constants of FeOOH/BiO2-x under photo-Fenton conditions were 2.33 times and 3.32 times higher than photocatalysis and Fenton catalysis, respectively. The amorphous FeOOH was tightly coated on the layered BiO2-x, which significantly increased the specific surface area and the number of active sites of the composites, and facilitated the improvement of the separation efficiency of the photogenerated carriers and the prevention of photo-corrosion of BiO2-x. The analysis of the mechanism of photo-Fenton synergistic degradation clarified that ·OH, h+, and ·O2- are the main active substances involved in the degradation of pollutants. The optimal degradation conditions were the addition of the FeOOH/BiO2-x composite catalyst loaded with 20% Fe at a concentration of 0.5 g/L, the addition of hydrogen peroxide at a concentration of 8 mM, and an initial pH of 4. This outstanding catalytic system offers a fresh approach to the creation and processing of iron-based photo-Fenton catalysts by quickly and efficiently degrading various organic contaminants.

Concentration- and Self-Catalysis-Dominated Rapid Synthesis of Multifunctional UiO-66(Ce) for Dual-Mode Sensing of Tetracycline

Simple and rapid synthesis of multifunctional metal-organic frameworks (MOFs) at room temperature (RT) with their multifunction controllable is still appealing for further expansion of the practical applications of MOFs. Herein, in this work, rapid RT synthesis of a multifunctional UiO-66(Ce) [M-UiO-66(Ce)] with both oxidase-like activity and fluorescence emission properties was facilely achieved within 15 min through a straightforward reactant concentration modulation and self-catalytic postmodification strategy. Appropriate concentrations of cerium ammonium nitrate or 1,4-benzenedicarboxylic acid (BDC) were beneficial for the synthesis of UiO-66(Ce) with better crystallization. During the postmodification process, through regulation of the self-photocatalysis of UiO-66(Ce), a high conversion rate from BDC to BDC-OH of up to 14% can be obtained, resulting in a significantly enhanced fluorescence signal of M-UiO-66(Ce) within 2 min. Moreover, M-UiO-66(Ce) enabled the accurate and reliable detection of tetracycline (TC) in real samples. Besides, the colorimetric and fluorescence modes complemented each other, expanding the linear range of TC detection and exhibiting its great potential for practical applications. This work provides new insights for the convenient and rapid synthesis of multifunctional materials based on MOFs, which is favorable for promoting the large-scale preparation of MOFs and their practical application in on-site environmental pollutant sensing.

Development of Co3O4/TiO2/rGO photocatalyst for efficient degradation of pharmaceutical pollutants with effective charge carrier recombination suppression

Pharmaceutical contaminations in the water resources becomes very serious global environmental issue. Therefore, these pharmaceutical molecules should be removed from the water resources. In the current work, 3D/3D/2D-Co3O4/TiO2/rGO nanostructures were synthesized through a facile self-assembly-assisted solvothermal method for an effective removal of pharmaceutical contaminations. The nanocomposite was finely optimized through the response surface methodology (RSM) technique with different initial reaction parameters and different molar ratios. Various characterization techniques were used to understand the physical and chemical properties of 3D/3D/2D heterojunction and its photocatalytic performance. The degradation performance of ternary nanostructure was rapidly increased owing formation of 3D/3D/2D heterojunction nanochannels. The 2D-rGO nanosheets play an essential role in trapping photoexcited charge carriers to reduce the recombination process rapidly as confirmed by photoluminescence analysis. Tetracycline and ibuprofen were used as model carcinogen molecules to examine the degradation efficiency of Co3O4/TiO2/rGO under visible light irradiation using halogen lamp. The intermediates produced during the degradation process were studied using LC-TOF/MS analysis. The pharmaceutical molecules tetracycline and ibuprofen follows pseudo first order kinetics model. The photodegradation results show that the 6:4 M ratio of Co3O4:TiO2 with 5% rGO exhibits 12.4 times and 12.3 higher degradation ability than pristine Co3O4 nanostructures against tetracycline and ibuprofen, respectively. These results shows high efficiency of Co3O4/TiO2/rGO composite against the degradation of tetracycline and ibuprofen.

CdS Nanoparticles Supported by Cobalt@Carbon-Derived MOFs for the Improved Adsorption and Photodegradation of Ciprofloxacin

The design and synthesis of efficient photocatalysts that promote the degradation of organic pollutants in water have attracted extensive attention in recent years. In this work, CdS nanoparticles are grown in situ on Co@C derived from metal-organic frameworks. The resulting hierarchical CdS/Co@C nanostructures are evaluated in terms of their adsorption and photocatalytic ciprofloxacin degradation efficiency under visible-light irradiation. The results show that, apart from offering a large surface area (55.69 m²·g^-1), the prepared material can effectively suppress the self-agglomeration of CdS and enhance the absorption of visible light. The CdS/Co@C-7 composite containing 7% wt Co@C has the highest photodegradation rate, and its activity is approximately 4.4 times greater than that of CdS alone. Moreover, this composite exhibits remarkable stability after three successive cycles of photocatalysis. The enhanced photocatalytic performance is largely ascribed to the rapid separation of electron-hole pairs and the effective electron transfer between CdS and Co@C, which is confirmed via electrochemical experiments and photoluminescence spectra. The active substance capture experiment and the electron spin resonance technique show that h⁺ is the main active entity implicated in the degradation of CIP, and accordingly, a possible mechanism of CIP photocatalytic degradation over CdS/Co@C is proposed. In general, this work presents a new perspective on designing novel photocatalysts that promote the degradation of organic pollutants in water.

Construction of a novel S-scheme heterojunction piezoelectric photocatalyst V-BiOIO3/FTCN and immobilization with floatability for tetracycline degradation

A high-performance piezoelectric photocatalyst (V-BiOIO₃/FTCN) was constructed to improve removal efficiency of tetracycline hydrochloride (TCH). The role of V-BiOIO₃ in the composite was to introduce piezoelectric effect and construct S-scheme heterojunction photocatalyst with fish scale tubular carbon nitride (FTCN). The morphology, structure, chemical composition and optoelectronic characteristics of the as-prepared photocatalysts were studied by SEM, TEM, XRD, XPS and UV-Vis DRS. Combined with UV-Vis DRS, XPS valence band, Mott-schottky curve and theoretical calculations, the mechanism of TCH degradation was deeply analyzed. A series of degradation experiments showed that the V-BiOIO₃/FTCN could effectively degrade TCH, and the removal efficiency was further improved under the action of ultrasound. Importantly, the further immobilized V-BiOIO₃/FTCN/MS could float on the water surface to degrade TCH without additional stirring, which facilitated the recovery of photocatalysts and showed excellent practical application value. This work provided a reference for the design and immobilization of carbon nitride-based piezoelectric photocatalysts.

Improving the Surface Oxygen Vacancy Concentration of Bi2O4 through the Pretreatment of the NaBiO3·2H2O Precursor as a High-Performance Visible Light Photocatalyst

The oxygen-deficient bismuth oxide, Bi₂O₄, synthesized by a typical hydrothermal method using commercial NaBiO₃·2H₂O as a raw material only has a relatively low concentration of surface oxygen vacancies (OVs). How to improve the visible light photocatalytic performance of Bi₂O₄ via tuning its surface OV concentration is still a huge challenge. In this study, improving the surface OVs of Bi₂O₄ was successfully realized through the pretreatment of commercial NaBiO₃·2H₂O, including thermal treatment in air and hydrothermal treatment in 10 M NaOH solution, forming NaBiO₃·xH₂O intermediate products first, and then hydrothermal preparation of Bi₂O₄ target products using NaBiO₃·xH₂O instead of commercial NaBiO₃·2H₂O as the precursor. The enhanced surface OV content not only narrows the band gap of Bi₂O₄ and thus extends its optical response range but also captures more photoexcited electrons and thus increases the charge carriers' separation efficiency and prolongs the charge carriers' lifetime of Bi₂O₄. Among the above-mentioned two pretreatment methods, the effects of the hydrothermal pretreatment are superior to those of the thermal treatment, involving the increase of surface OVs, the optical harvesting capacity, and the charge carriers' separation efficiency. Accordingly, Bi₂O₄ prepared by the hydrothermal pretreatment route exhibits the optimal visible light catalytic performance toward the removal of methyl orange (MO) and phenol due to its most abundant surface OV concentration, which is 2.59 times and 4.26 times higher than that of Bi₂O₄ synthesized directly by the commercial NaBiO₃·2H₂O route, respectively. Holes (h⁺) and superoxide radicals (^•O₂^-) are identified as the main active species, while singlet oxygen (¹O₂) and hydroxyl radicals (^•OH) are verified as the second and third important active species for organic pollutant removal, respectively. This work has developed a novel strategy to promote the catalytic performance of single Bi₂O₄ induced by the enhanced surface OV concentration through the pretreatment of the precursor, commercial NaBiO₃·2H₂O.

Bifunctional 2D/2D g-C3N4/BiO2-x nanosheets heterojunction for bacterial disinfection mechanisms under visible and near-infrared light irradiation

The efficient deployment of visible and near-infrared (NIR) light for photocatalytic disinfection is of great concern a matter. Herein, we report a specific bifunctional 2D/2D g-C₃N₄/BiO_2-x nanosheets heterojunction, prepared through a self-assembly approach. Delightfully, the obtained 2D/2D heterojunctions exhibited satisfactory photocatalytic disinfection performance towards Escherichia coli K-12 (E. coli K-12) under visible light irradiation, which was credited to the Z-scheme interfacial heterojunction facilitating the migration of photogenerated carries. The photoactivity enhancement driven by NIR light illumination was ascribed to the cooperative synergy effect of photothermal effect and "hot electrons", engineering efficient charge transfer. Intriguingly, the carboxyl groups emerged on g-C₃N₄ nanosheets contributed a vital role in establishing the enhanced photocatalytic reaction. Moreover, the disinfection mechanism was systematically described. The cell membrane was destroyed, evidenced by the generation of lipid peroxidation reaction and loss of energy metabolism. Subsequently, the damage of defense enzymes and release of intracellular constituents announced the irreversible death of E. coli K-12. Interestingly enough, considerable microbial community shifts of surface water were observed after visible and NIR light exposure, highlighting the critical feature of disinfection process in shaping microbial communities. The authors believe that this work gives a fresh light on the feasibility of heterostructures-enabled disinfection processes.

Unraveling the Origin of Enhanced Activity of the Nb2O5/H2O2 System in the Elimination of Ciprofloxacin: Insights into the Role of Reactive Oxygen Species in Interface Processes

The overlooked role of reactive oxygen species (ROS), formed and stabilized on the surface of Nb₂O₅ after H₂O₂ treatment, was investigated in the adsorption and degradation of ciprofloxacin (CIP), a model antibiotic. The contribution of ROS to the elimination of CIP was assessed by using different niobia-based materials in which ROS were formed in situ or ex situ. The formation of ROS was confirmed by electron paramagnetic resonance (EPR) and Raman spectroscopy. The modification of the niobia surface charge by ROS was monitored with zeta potential measurements. The kinetics of CIP removal was followed by UV-vis spectroscopy, while identification of CIP degradation products and evaluation of their cytotoxicity were obtained with liquid chromatography-mass spectrometry (LC-MS) and microbiological studies, respectively. Superoxo and peroxo species were found to significantly improve the efficiency of CIP adsorption on Nb₂O₅ by modifying its surface charge. At the same time, it was found that improved removal of CIP in the dark and in the presence of H₂O₂ was mainly determined by the adsorption process. The enhanced adsorption was confirmed by infrared spectroscopy (IR), total organic carbon measurements (TOC), and elemental analysis. Efficient chemical degradation of adsorbed CIP was observed upon exposure of the Nb₂O₅/H₂O₂ system to UV light. Therefore, niobia is a promising inorganic adsorbent that exhibits enhanced sorption capacity toward CIP in the presence of H₂O₂ under dark conditions and can be easily regenerated in an environmentally benign way by irradiation with UV light.

In silico toxicity evaluation for transformation products of antimicrobials, from aqueous photolysis degradation

This study investigates degradation processes of three antimicrobials in water (norfloxacin, ciprofloxacin, and sulfamethoxazole) by photolysis, focusing on the prediction of toxicity endpoints via in silico quantitative structure-activity relationship (QSAR) of their transformation products (TPs). Photolysis experiments were conducted in distilled water with individual solutions at 10 mg L^-1 for each compound. Identification of TPs was performed by means of LC-TOF-MS, employing a method based on retention time, exact mass fragmentation pattern, and peak intensity. Ten main compounds were identified for sulfamethoxazole, fifteen for ciprofloxacin, and fifteen for norfloxacin. Out of 40 identified TPs, 6 have not been reported in the literature. Based on new data found in this work, and TPs already reported in the literature, we have proposed degradation pathways for all three antimicrobials, providing reasoning for the identified TPs. QSAR risk assessment was carried out for 74 structures of possible isomers. QSAR predictions showed that all 19 possible structures of sulfamethoxazole TPs are non-mutagenic, whereas 16 are toxicant, 18 carcinogenic, and 14 non-readily biodegradable. For ciprofloxacin, 28 out of the 30 possible structures for the TPs are mutagenic and non-readily biodegradable, and all structures are toxicant and carcinogenic. All 25 possible norfloxacin TPs were predicted mutagenic, toxicant, carcinogenic, and non-readily biodegradable. Results obtained from in silico QSAR models evince the need of performing risk assessment for TPs as well as for the parent antimicrobial. An expert analysis of QSAR predictions using different models and degradation pathways is imperative, for a large variety of structures was found for the TPs.

N-CQDs from reed straw enriching charge over BiO2-x/BiOCl p-n heterojunction for improved visible-light-driven photodegradation of organic pollutants

Green bismuth-based photocatalysts have attracted extensive attention in the field of PPCPs photodegradation. The improved carrier separation efficiency still remains a key factor to enhance photocatalytic performance. Herein, N-doped biomass carbon quantum dots (N-CQDs) decorated p-n heterojunction photocatalyst BiO_2-x/BiOCl was prepared using a facile ion-etching strategy, and it displayed a markedly enhanced catalytic activity in the photodegradation of sulfonamide antibiotics. Calculated by the differential charge density, the doped N-CQDs could gather photogenerated electrons, which indicated that the introduction of N-CQDs into BiO_2-x/BiOCl would effectively inhibit the recombination of photogenerated charge carriers. In addition, photocatalytic performance and density functional theory (DFT) calculation results revealed that the photogenerated electrons tended to transfer from p-BiOCl to n-BiO_2-x through N-CQDs, which could generate ·O₂^- and photogenerated h⁺ to oxidize the target pollutants. Benefiting from the synergistic effect of accelerated separation of e^--h⁺ in p-n heterojunction and the electron-rich performance of N-CQDs, the superb TOC removal efficiencies (89.40% within 120 min visible-light irradiation) and toxicity reduction performance of photodegradation intermediates were achieved. As a consequence, this work will provide a design of high-quality photocatalysts and a green-promising strategy for bismuth-based photocatalysts in the water treatment of PPCPs.

Vacancy-rich BiO2-x as a highly-efficient persulfate activator under near infrared irradiation for bacterial inactivation and mechanism study

This study, for the first time, developed a novel defective BiO_2-x based collaborating system, where the near-infrared light (NIR) irradiation (λ > 700 nm) initiated persulfate activation and photocatalytic bacterial inactivation simultaneously. Vacancy-rich BiO_2-x nanoplates possessed impressive NIR absorption and firstly realized persulfate activation under NIR irradiation. In this collaborating system, on one hand, the persulfate can be transformed into sulfate radicals through light/heat activation mode directly, which would be enhanced by the presence of vacancy-rich BiO_2-x owing to its outstanding light and heat absorption ability. On the other hand, the photogenerated electrons can further efficiently react with persulfate and form sufficient reactive sulfate radicals. The sulfate radicals, synergizing with other reactive species (O₂^-, h⁺, etc.), achieved a 7-log Escherichia coli inactivation within 40 min. The systematic investigation of inactivation mechanism revealed that the reactive species caused the dysfunction of cellular respiration, ATP synthesis and bacterial membrane, followed by the severely oxidative damage to the antioxidative SOD and CAT enzymes and the generation of carbonylated protein. The final leakage of DNA and RNA implied the lethal damage to the bacteria cells. This work provided a new insight into the persulfate associated NIR driven remediation technology of controlling microbial contaminants.

Perylene diimide supermolecule (PDI) as a novel and highly efficient cocatalyst for photocatalytic degradation of tetracycline in water: A case study of PDI decorated graphitic carbon nitride/bismuth tungstate composite

Employing perylene diimide supermolecule (PDI) as metal-free cocatalyst, a novel PDI/g-C₃N₄/Bi₂WO₆ (PCB) photocatalyst was constructed for the effective degradation of antibiotics. Both the photocatalytic activity and photostability of g-C₃N₄/Bi₂WO₆ (gCB) were further improved after loading PDI. Under simulated sunlight illumination, the apparent rate constant of tetracycline (TC) degradation by PCB reached 2.6 times that of gCB. The photocatalytic activity of PCB still kept over 80% after 4 cycle experiments, while gCB only remained around 21%. The superior activity of PCB was ascribed to the synergism between the extended visible light absorption range through the participation of PDI cocatalyst and facilitated gCB-to-PDI photoelectron transfer. TC would finally be transformed into non-toxic ring opening products and mineralized. This work demonstrated that PDI was an excellent metal-free cocatalyst and exhibited great potential to boost the activity of photocatalysts.

Construction of oxygen vacancy assisted Z-scheme BiO2-x/BiOBr heterojunction for LED light pollutants degradation and bacteria inactivation

It is well known that the most important task of photocatalytic technology is to synthesize photocatalysts with compact heterojunction structure and high redox ability. To achieve the goal, a novel Z-scheme BiO_2-x/BiOBr heterojunction containing oxygen vacancy was synthesized by an in-situ generation process. Several techniques, X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) have verified the BiO_2-x/BiOBr heterojunction. XPS and electron spin resonance (ESR) reveals the presence of oxygen vacancy in the BiO_2-x/BiOBr composite. As expected, the BiO_2-x/BiOBr composite showed good performance in removing Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), Rhodamine B (RhB) and tetracycline (TC). The effects of inorganic ions, pH value and water matrix were investigated with many details. The active species and proposed mechanism were revealed by trapping experiment and related characterizations. The synergistic effect of oxygen vacancy and Z-scheme heterojunction makes the BiO_2-x/BiOBr composite possess excellent photocatalytic activity.

WO3/Ag2CO3 Mixed Photocatalyst with Enhanced Photocatalytic Activity for Organic Dye Degradation

The development of an efficient photocatalyst with superior activity under visible light has been regarded as a significant strategy for pollutant degradation and environmental remediation. Herein, a series of WO₃/Ag₂CO₃ mixed photocatalysts with different proportions were prepared by a simple mixing method and characterized by XRD, SEM, TEM, XPS, and DRS techniques. The photocatalytic performance of the WO₃/Ag₂CO₃ mixed photocatalyst was investigated by the degradation of rhodamine B (RhB) under visible light irradiation (λ > 400 nm). The photocatalytic efficiency of the mixed WO₃/Ag₂CO₃ photocatalyst was rapidly increased with the proportion of Ag₂CO₃ up to 5%. The degradation percentage of RhB by WO₃/Ag₂CO₃-5% reached 99.7% within 8 min. The pseudo-first-order reaction rate constant of WO₃/Ag₂CO₃-5% (0.9591 min^-1) was 118- and 14-fold higher than those of WO₃ (0.0081 min^-1) and Ag₂CO₃ (0.0663 min^-1). The catalytic activities of the mixed photocatalysts are not only higher than those of the WO₃ and Ag₂CO₃ but also higher than that of the WO₃/Ag₂CO₃ composite prepared by the precipitation method. The activity enhancement may be because of the easier separation of photogenerated electron-hole pairs. The photocatalytic mechanism was investigated by free radical capture performance and fluorescence measurement. It was found that light-induced holes (h⁺) was the major active species and superoxide radicals (·O₂ ^-) also played a certain role in photocatalytic degradation of RhB.

Facile fabrication of BiOIO3/MIL-88B heterostructured photocatalysts for removal of pollutants under visible light irradiation

In this work, a Z-scheme heterojunction of BiOIO₃/MIL-88B was constructed via two steps solvothermal method. Various characterization techniques showed that this Z-scheme heterojunction is an effective strategy to promote spatial charge separation, and the catalytic performance was evaluated by degrading simulated organic pollutants. Herein, the BiOIO₃/MIL-88B composites exhibited an exceptional removal rate for Reactive Blue 19 and tetracycline hydrochloride (TC) under visible light irradiation, which was approximately 3.28 and 4.22 times higher than the pristine BiOIO₃, respectively. Additionally, the analysis of photocatalysis mechanism showed that the active species O₂^- and OH could strongly affect the degradation of tetracycline hydrochloride (TC) in the studied system. Furthermore, the degradation process of TC was tracked and detected by identifying intermediates produced in the reaction system. It is anticipated that this research can deepen the understanding of BiOIO₃/MIL-88B heterojunction structure to remove organic contaminants and provide a strategy for applying photocatalytic technology in the practical industry.

Surface modification induced construction of core-shell homojunction of polymeric carbon nitride for boosted photocatalytic performance

Surface modification has been considered a simple and effective strategy to enhance the photocatalytic activity of polymeric carbon nitride (CN), but resultant difference of energy band structures between the modified surface layer and the unmodified inside in the sample has always been neglected. Herein, maleoyl-modified CN (MaCN) was simply prepared via a dehydration reaction between CN and maleic acid, and exhibits enhanced charge separation, optical absorption, and thus photocatalytic hydrogen evolution activity, relative to the bulk CN. The surface modification causes variation of the band structure, suggesting the difference of band levels between the surface layer with maleoyl-modification and the inside without any modification in MaCN, and the surface layer and the inside with matched band levels form type-II core-shell homojunction to enhance the charge separation. This work expounds a conceptual framework of core-shell homojunction in surface-modified CN photocatalysts.

Water-soluble manganese porphyrins as good catalysts for cipro- and levofloxacin degradation: Solvent effect, degradation products and DFT insights

Synthetic manganese porphyrins (MnPs), in the presence of oxidants, were employed for the degradation of fluoroquinolone antibiotics. Ciprofloxacin (CIP) and levofloxacin (LEV) degradation by iodosylbenzene, iodobenzene diacetate, H₂O₂ and meta-chloroperbenzoic acid using water-soluble MnP catalysts yielded thirteen and nine products, respectively, seven of which have been proposed for the first time. The MnP catalysts have demonstrated the ability to degrade these antibiotics to a high degree (up to 100% degradation). The structures of the degradation products were proposed based on mass spectrometry analysis, and density functional theory calculations could confirm how the substituent moieties attached to the basic chemical structure of the fluoroquinolones influence the degradation reactions. CIP has been shown to be a more reactive substrate towards the porphyrinic catalysts tested because of its three-membered ring. However, the catalysts could almost completely degrade LEV, highlighting the ability of these porphyrins to act as catalysts to degrade environmental pollutants.

Highly efficient adhesion and inactivation of Escherichia coli on visible-light-driven amino-functionalized BiOBr hybrids

Amino groups are successfully introduced on the surface of BiOBr nanosheets through a facile ammonia functionalization method. The surface morphology of the modified BiOBr hybrids varies on the concentration of applied ammonia solution. The active {001}-facet-exposed feature of nanosheets is well retained after amino-functionalization. With generation of small Bi₂O₄ nanoparticles on the surface of BiOBr nanosheets, the light adsorption of hybrids gradually shifts to the near infrared range. Compared to pure BiOBr with negligible activity, BOB10 hybrids exhibit superior photocatalytic activity for bacterial inactivation, with 7-log cells reduction in 40 min under LED irradiation. Amino functionalization endows BOB10 hybrids excellent adhesion capability towards surface negatively-charged bacterium Escherichia coli, which can significantly shortened access distance of the predominant •O₂^- and h⁺ guaranteeing their inactivation ability on cells membrane, thus leading to remarkable bacterial inactivation performance.

In-situ self-assembly construction of hollow tubular g-C3N4 isotype heterojunction for enhanced visible-light photocatalysis: Experiments and theories

A highly reactive hollow tubular g-C₃N₄ isotype heterojunction (SCN-CN) was designed to enhance visible light absorption and manipulate the directed transfer of electrons and holes. The results of UV-vis DRS, XPS valence band and DFT theoretical calculations indicated S doping increases the visible-light absorption capacity and changed the ba nd gap structure of g-C₃N₄ (CN), resulting in the transfer of electrons from the CN to the SCN and holes from the SCN to the CN under visible light. In addition, the tubular structure of the SCN-CN facilitated the transfer of electrons in the longitudinal direction, which reduced charge carrier recombination. Furthermore, the optical properties, electronic structure, and electron transfer of SCN-CN were also studied by experiments and theoretical calculations. The antibiotic tetracycline hydrochloride (TCH) and dye Rhodamine B (RHB) were subjected to evaluate the photocatalytic performance of SCN-CN. The scavenger tests and ESR data showed that the h⁺, ·O₂^- and ·OH worked together in the photocatalytic process. Moreover, the photocatalytic degradation pathway was analyzed by LC-MS. This study synthesized a hollow tubular CN isotype heterojunction with high visible-light photocatalytic performance and provided a theoretical basis for CN isotype heterojunction.

Ag0/Au0 nanocluster loaded Bi2O4 photocatalyst for methyl orange dye photodegradation

Visible-light-sensitive Ag and Au nanocluster loaded Bi₂O₄ (Ag–Bi₂O₄ and Au–Bi₂O₄) semiconductor photocatalysts have been synthesized. The composite materials exhibited increased photocatalytic degradation of the azo-dye pollutant, Methyl Orange (MO). In addition, Au–Bi₂O₄ (Au-7% wt) showed the highest MO degradation rate (0.05904 min⁻¹) i.e. 7.69 times higher than the pristine Bi₂O₄ and 1.4 times higher than 1% Ag–Bi₂O₄. The optical properties of the composites showed that the band gaps of the composite samples 1% Ag–Bi₂O₄ and 7% Au–Bi₂O₄ were 1.96 eV and 2.09 eV, respectively. The increase in the degradation rate is attributed to the decrease of the recombination rate of photoinduced e⁻/h⁺, caused by the enhanced charge transfer between the metal nanoparticles and Bi₂O₄ as confirmed in the photocurrent measurements. The photocurrent measurements showed increase in the transients output by 8.25 times and 2.75 times for 1% Ag–Bi₂O₄ & 3% Au–Bi₂O₄, respectively as compared to that of the pristine Bi₂O₄. These features further aided the increase in the photocatalytic efficiency while retaining the original physical properties, thus showing the robustness of Bi₂O₄ as a photocatalyst.

Illustration of charge transfer between Bi₂O₄ and nanoclusters, and photocatalytic MO degradation by M/Bi₂O₄ under visible light irradiation (M = Ag or Au).

Oxide-based composites: applications in thermo-photocatalysis

Recent progress on oxide-based thermo-photocatalytic composite systems. Role of plasmonic, defect-related, and thermal effects on the catalytic performance.

Study of intermediate by-products and mechanism of the photocatalytic degradation of ciprofloxacin in water using graphitized carbon nitride nanosheets

The photocatalytic degradation of the antibiotic ciprofloxacin in water was carried out with nanosheets of graphitic carbon nitride (g-C₃N₄) as catalyst and visible light irradiation using low-power (4 × 10 W) white light LEDs. The aim of this study was to identify the intermediate by-products formed during the degradation and to propose a pathway for CIP degradation. To achieve this goal, photocatalytically degraded CIP solutions were analysed by liquid chromatography coupled to high-resolution mass spectrometry using a QTOF instrument. The accurate mass and the MS/MS data of the detected ions allowed us to determine the elementary composition of eight by-products and to propose the chemical structures for seven of them. Three of these by-products have been reported for the first time and the elementary composition of a fourth one that had been wrongly reported in the literature was accurately established. CIP degradation followed a pseudo-first order kinetics with a pseudo-first order kinetic constant of 0.035 min^-1. In addition, a study of the influence of several scavengers showed that only the presence of triethanolamine dramatically reduced the pseudo-first order kinetic constant (0.00072 min^-1), pointing out that the reactive species were the holes produced in the catalyst. Finally, the main pathway of CIP degradation seems to be the attack to the piperazine group by ·OH radicals, following heterocycle breakup and the subsequent loss of two of its carbon atoms as CO₂ molecules, and then defluorination, oxidation and cleavage of the cycles of this intermediate.

Oxygen vacancy rich Bi2O4-Bi4O7-BiO2-x composites for UV-vis-NIR activated high efficient photocatalytic degradation of bisphenol A

To fully utilize the solar light, photocatalyst with broad spectrum response from UV to near-infrared (NIR) is desirable. In this work, ternary mixed valent Bi₂O₄-Bi₄O₇-BiO_2-x with rich oxygen vacancy has been synthesized through one-pot hydrothermal treatment of NaBiO₃. The results showed that through adjusting the hydrothermal conditions, oxygen vacancy-rich Bi₂O₄-Bi₄O₇-BiO_2-x nanocomposites with much higher efficiency than single or mixed bismuth oxides (Bi₂O₄, Bi₄O₇, BiO_2-x and Bi₄O₇-BiO_2-x,) can be synthesized for photocatalytic degradation of bisphenol A (BPA) under UV, visible, and NIR light irradiation. In addition, the liquid chromatography-mass spectrometer (LC-MS) characterization demonstrated that BPA was oxidized to 4-isopropenyphenol first and the rings were opened sequentially under NIR light irradiation. Further detection of reactive species indicated that holes, O₂^-, and OH were the main oxidizing species in the degradation system. The experimental observations and density functional theory (DFT) calculations suggested that both type-II and the Z-scheme charge transfer with oxygen vacancies as electrons and holes mediators were formed at the interfaces of Bi₂O₄, Bi₄O₇, and BiO_2-x, resulting in a very efficient separation of photogenerated charge carriers in the composite. This work adds to the growing potential of mixed valent bismuth oxides based photocatalysts and is expected to accelerate the pace of the development of new-generation photocatalysts with high efficiency utilizing full-spectrum solar light.

Synergistic Effect of Photocatalyst CdS and Thermalcatalyst Cr2O3-Al2O3 for Selective Oxidation of Aromatic Alcohols into Corresponding Aldehydes

Selective transformation of alcohols to corresponding aldehydes has a crucial significance under mild conditions in industrial manufacturing. Herein, a novel photothermal catalyst (Cr₂O₃-Al₂O₃)/CdS (CAO/CdS) was successfully synthesized by coupling two-dimensional Cr₂O₃-Al₂O₃ (CAO) nanosheets and one-dimensional CdS nanorods. The CAO/CdS was characterized in detail. The synergistic effect of thermal catalyst CAO and photocatalyst CdS on the transformation of aromatic alcohols into aldehydes was verified. The result exhibited that alcohols could be oxidized into corresponding aldehydes efficiently under visible light illumination due to photocatalysis of CdS and thermal catalysis of CAO. CAO can weaken the bonds of O-H and C-Hα of alcohol at low temperatures, and CdS can produce active substances (·O₂^- and h⁺) for oxidizing alcohols to aldehydes under visible light illumination. The benzaldehyde yield increased about three times. It is proposed that the work has significant theoretical and practical values in photocatalysis studies.

Ag-Bridged Z-Scheme 2D/2D Bi5FeTi3O15/g-C3N4 Heterojunction for Enhanced Photocatalysis: Mediator-Induced Interfacial Charge Transfer and Mechanism Insights

Heterojunction photocatalysts have attracted widespread interest in photocatalysis because of their high-efficiency interfacial charge-transfer characteristics of nanoarchitectures. In this study, Ag-bridged 2D/2D Bi₅FeTi₃O₁₅/ultrathin g-C₃N₄ Z-scheme heterojunction photocatalysts with powerful interfacial charge transfer has been synthesized via a facile ultrasound method coupled with a photoreduction strategy for efficient photocatalytic degradation of antibiotics. The morphology analysis displays that the bridged Ag nanoparticles were anchored on the interface of layered Bi₅FeTi₃O₁₅ and ultrathin g-C₃N₄ nanosheets. Owing to its unique 2D/2D ternary heterostructure, the Bi₅FeTi₃O₁₅/2%Ag/10% ultrathin g-C₃N₄ composite exhibited the best tetracycline degradation performance under visible-light and simulated solar irradiation. Meanwhile, the intermediates and degradation pathways were proposed by a liquid-phase mass spectrometry system. Characterizations and density functional theory studies together verify that the matched band structure of Bi₅FeTi₃O₁₅ and g-C₃N₄ could induce a superfast Z-scheme interfacial charge-transfer path. More importantly, bridged Ag nanoparticles in the 2D/2D heterojunction extended the light absorption range and prolonged the lifetime of photogenerated electron-holes induced by Bi₅FeTi₃O₁₅. This work affords a promising approach for designing multicomponent Z-scheme heterojunction photocatalysts for highly efficient photocatalytic application.

Amorphous Bimetallic Cobalt Nickel Sulfide Cocatalysts for Significantly Boosting Photocatalytic Hydrogen Evolution Performance of Graphitic Carbon Nitride: Efficient Interfacial Charge Transfer

Noble metals usually work as the cocatalyst for photocatalytic water splitting, but their rare and expensive properties narrowed their wide development. Transition-metal sulfides have appeared to be promising non-noble metal cocatalysts in the hydrogen evolution reaction (HER) to meet future energy demands. Meanwhile, many studies focus on the fabrication of bimetallic catalysts because of their remarkably superior catalytic activity compared with monometallic substances. Herein, amorphous bimetallic cobalt nickel sulfide (CoNiS_x) was fabricated to work as a cocatalyst in the photocatalytic H₂ evolution reaction, which can couple with pristine graphitic carbon nitride (g-C₃N₄). CoNiS_x-CN exhibits a larger specific surface area compared with g-C₃N₄, making it possess more reaction active sites. Moreover, the contacted interface in the CoNiS_x-CN composite photocatalyst contributes to higher separation efficiency of photogenerated carriers, which was proved by experimental and theoretical calculations. More importantly, the theoretical calculation also verified that CoNiS_x-CN has relatively closer Gibbs free energy to zero than pure g-C₃N₄ and corresponding monometallic cocatalyzed g-C₃N₄. Therefore, the prepared CoNiS_x-CN composite exhibited a dramatic photocatalytic HER performance of 2.366 μmol mg^-1 h^-1, which is about 76-fold higher in comparison with pristine g-C₃N₄ and comparable to g-C₃N₄ with Pt as a cocatalyst under 420 nm light irradiation. This study reveals a promising and efficient bimetallic cocatalyst for the photocatalytic H₂ evolution reaction.

Construction of Spatial Charge Separation Facets on BaTaO2N Crystals by Flux Growth Approach for Visible-Light-Driven H2 Production

Low charge separation efficiencies are regarded as obstacles that limit the improvement in the photocatalytic performance of BaTaO₂N. In this study, we demonstrated that the anisotropic facets ({100} and {110} facets) of BaTaO₂N for efficient spatial charge separation were successfully constructed using the one-pot flux-assisted nitridation approach. As a result, the photocatalytic activity for H₂ production on BaTaO₂N with coexposed {100} and {110} facets was nearly 10-fold over that of BaTaO₂N with only {100} facets and that of the conventional irregularly shaped sample. This finding provides an innovative approach to the development of efficient (oxy)nitride photocatalysts for solar energy conversion.