Selective Environmental Remediation of Strontium and Cesium Using Sulfonated Hyper-Cross-Linked Polymers (SHCPs)

Recent trends in the phytoremediation of radionuclide contamination of soil by cesium and strontium: Sources, mechanisms and methods: A comprehensive review

This comprehensive review examines recent trends in phytoremediation strategies to address soil radionuclide contamination by cesium (Cs) and strontium (Sr). Radionuclide contamination, resulting from natural processes and nuclear-related activities such as accidents and the operation of nuclear facilities, poses significant risks to the environment and human health. Cs and Sr, prominent radionuclides involved in nuclear accidents, exhibit chemical properties that contribute to their toxicity, including easy uptake, high solubility, and long half-lives. Phytoremediation is emerging as a promising and environmentally friendly approach to mitigate radionuclide contamination by exploiting the ability of plants to extract toxic elements from soil and water. This review focuses specifically on the removal of 90Sr and 137Cs, addressing their health risks and environmental implications. Understanding the mechanisms governing plant uptake of radionuclides is critical and is influenced by factors such as plant species, soil texture, and physicochemical properties. Phytoremediation not only addresses immediate contamination challenges but also provides long-term benefits for ecosystem restoration and sustainable development. By improving soil health, biodiversity, and ecosystem resilience, phytoremediation is in line with global sustainability goals and environmental protection initiatives. This review aims to provide insights into effective strategies for mitigating environmental hazards associated with radionuclide contamination and to highlight the importance of phytoremediation in environmental remediation efforts.

Facile synthesis of anthranilic acid based dual functionalized novel hyper cross-linked polymer for promising CO2 capture and efficient Cr3+ adsorption

A novel hyper cross-linked polymer of 2-Aminobenzoic acid (HCP-AA) is synthesized for the adsorption of Cr3+ and CO2. The Brunauer-Emmett-Teller surface area of HCP-AA is 615 m2 g-1. HCP-AA of particle size 0.5 nm showed maximum adsorption of Cr3+ for lab prepared wastewater (93%) while it was 88% for real industrial wastewater. It is might be due to electrostatic interactions, cation-π interactions, lone pair interactions and cation exchange at pH 7; contact time of 8 min; adsorbent dose 0.8 g. The adsorption capacity was calculated 52.63 mg g-1 for chromium metal ions at optimum conditions. Freundlich isotherm studies R2 = 0.9273 value is the best fit and follows pseudo second order kinetic model (R2 = 0.979). The adsorption is found non-spontaneous and exothermic through thermodynamic calculations like Gibbs free energy (ΔG), enthalpy change (ΔH) and entropy change (ΔS) were 6.58 kJ mol-1, - 60.91 kJ mol-1 and - 45.79 kJ mol-1 K-1, respectively. The CO2 adsorption capacity of HCP-AA is 1.39 mmol/g with quantity of 31.1 cm3/g (6.1 wt%) at 273Kwhile at 298 K adsorption capacity is 1.12 mmol/g with quantity 25.2 cm3/g (5 wt%). Overall, study suggests that carboxyl (-COOH) and amino (-NH2) groups may be actively enhancing the adsorption capacity of HCP-AA for Cr3+ and CO2.

Phosphate-rich cellulose beads for efficient cesium extraction from aqueous solutions: a novel approach for cellulose utilization

In this work, phosphate-rich cellulose beads (CBPs) were first used for cesium extraction from aqueous solutions. These green, abundant, cheap, and renewable CBPs demonstrated a high adsorption capacity and fast absorption rate. Besides, the CBPs also exhibited excellent stability and recycling performance, as well as good selectivity. This study presents the promising application potential of cellulose for efficient cesium extraction from aqueous media.

Hypercrosslinked waste polycarbonate to remove heavy metal contaminants from wastewater

In this research, the waste polycarbonate was hypercrosslinked during the Friedel-Crafts reaction to eliminate metallic ions from the wastewater solution. The experiments for inspecting the adsorption behavior of lead and cadmium ions were conducted at the initial concentration of 20-100 mg/L, contact time of 10-80 min, temperature of 20-80 °C, and pH of 6-11. The isotherm, kinetic, and thermodynamic models have been used to explain the behavior of the metal ions removal process. The correlation coefficient and adsorption capacity of the kinetic model for cadmium ion have obtained 0.995 and 160.183 mg/g, respectively, and the correlation coefficient and adsorption capacity of the kinetic model for lead ion has obtained 0.998 and 160.53 mg/g, respectively, which declared that the cascade was not monolayer. The correlation coefficient of the Freundlich is calculated at 0.995 and 0.998 for Cd and Pb, respectively, indicating the resin plane was not homogenized. The n constant for cadmium and lead ions has been calculated at 2.060 and 1.836, respectively, confirming that the resin is not homogenized, and the process has performed well. Afterward, the values of enthalpy and Gibbs free energy changes were obtained at - 7.68 kJ/mol and - 0.0231 kJ/mol.K for lead ions, respectively, which implies the exothermic and spontaneous state of the process. The values of enthalpy and Gibbs free energy changes have been obtained at - 6.62 kJ/mol and - 0.0204 kJ/mol.K for cadmium ions, respectively, which implies the exothermic and spontaneous nature of the adsorption. Also, the optimal empirical conditions for lead and cadmium ions have been found at a time of 60 min, temperature of 20 °C, initial concentration of 100 mg/L, and pH of 10. At a time of 45 min, the diffusion coefficient and mass transfer coefficient for lead ions have been calculated at 0.1269 × 1020 m2/s and 0.2028 × 1015 m/s, respectively. In addition, at a time of 45 min, the diffusion coefficient and mass transfer coefficient for cadmium ions have been calculated at 0.1463 × 1020 m2/s and 0.1054 × 1015 m/s, respectively. Moreover, the mechanism study explains that the C-O-C and C-H in the aromatic groups have a crucial aspect in the bond formation among metallic ions and resin.

Emerging environmentally friendly bio-based nanocomposites for the efficient removal of dyes and micropollutants from wastewater by adsorption: a comprehensive review

Water scarcity will worsen due to population growth, urbanization, and climate change. Addressing this issue requires developing energy-efficient and cost-effective water purification technologies. One approach is to use biomass to make bio-based materials (BBMs) with valuable attributes. This aligns with the goal of environmental conservation and waste management. Furthermore, the use of biomass is advantageous because it is readily available, economical, and has minimal secondary environmental impact. Biomass materials are ideal for water purification because they are abundant and contain important functional groups like hydroxyl, carboxyl, and amino groups. Functional groups are important for modifying and absorbing contaminants in water. Single-sourced biomass has limitations such as weak mechanical strength, limited adsorption capacity, and chemical instability. Investing in research and development is crucial for the development of efficient methods to produce BBMs and establish suitable water purification application models. This review covers BBM production, modification, functionalization, and their applications in wastewater treatment. These applications include oil-water separation, membrane filtration, micropollutant removal, and organic pollutant elimination. This review explores the production processes and properties of BBMs from biopolymers, highlighting their potential for water treatment applications. Furthermore, this review discusses the future prospects and challenges of developing BBMs for water treatment and usage. Finally, this review highlights the importance of BBMs in solving water purification challenges and encourages innovative solutions in this field.

Phytotoxicity of radionuclides: A review of sources, impacts and remediation strategies

Various anthropogenic activities and natural sources contribute to the presence of radioactive materials in the environment, posing a serious threat to phytotoxicity. Contamination of soil and water by radioactive isotopes degrades the environmental quality and biodiversity. They persist in soils for a considerable amount of time and disturb the fauna and flora of any affected area. Hence, their removal from the contaminated medium is inevitable to prevent their entry into the food chain and the organisms at higher levels of the food chain. Physicochemical methods for radioactive element remediation are effective; however, they are not eco-friendly, can be expensive and impractical for large-scale remediation. Contrastingly, different bioremediation approaches, such as phytoremediation using appropriate plant species for removing the radionuclides from the polluted sites, and microbe-based remediation, represent promising alternatives for cleanup. In this review, sources of radionuclides in soil as well as their hazardous impacts on plants are discussed. Moreover, various conventional physicochemical approaches used for remediation discussed in detail. Similarly, the effectiveness and superiority of various bioremediation approaches, such as phytoremediation and microbe-based remediation, over traditional approaches have been explained in detail. In the end, future perspectives related to enhancing the efficiency of the phytoremediation process have been elaborated.

A critical review on selenium removal capacity from water using emerging non-conventional biosorbents

Anthropogenic-driven selenium (Se) contamination of natural waters has emerged as severe health and environmental concern. Lowering Se levels to safe limits of 40 μg-L-1 (recommended by WHO) presents a critical challenge for the scientific community, necessitating reliable and effective methods for Se removal. The primary obectives of this review are to evaluate the efficiency of different biosorbents in removing Se, understand the mechanism of adsorption, and identify the factors influencing the biosorption process. A comprehensive literature review is conducted to analyze various studies that have explored the use of modified biochars, iron oxides, and other non-conventional biosorbents for selenium removal. The assessed biosorbents include biomass, microalgae-based, alginate compounds, peats, chitosan, and biochar/modified biochar-based adsorbents. Quantitative data from the selected studies analyzed Se adsorption capacities of biosorbents, were collected considering pH, temperature, and environmental conditions, while highlighting advantages and limitations. The role of iron impregnation in enhancing the biosorption efficiency is investigated, and the mechanisms of Se adsorption on these biosorbents at different pH levels are discussed. A critical literature assessment reveals a robust understanding of the current state of Se biosorption and the effectiveness of non-conventional biosorbents for Se removal, providing crucial information for further research and practical applications in water treatment processes. By understanding the strengths and limitations of various biosorbents, this review is expected to scale-up targeted research on Se removal, promoting the development of innovative and cost-effective adsorbents, efficient and sustainable approaches for Se removal from water.

Phosphonation of Alginate-Polyethyleneimine Beads for the Enhanced Removal of Cs(I) and Sr(II) from Aqueous Solutions

Although Cs(I) and Sr(II) are not strategic and hazardous metal ions, their recovery from aqueous solutions is of great concern for the nuclear industry. The objective of this work consists of designing a new sorbent for the simultaneous recovery of these metals with selectivity against other metals. The strategy is based on the functionalization of algal/polyethyleneimine hydrogel beads by phosphonation. The materials are characterized by textural, thermo-degradation, FTIR, elemental, titration, and SEM-EDX analyses to confirm the chemical modification. To evaluate the validity of this modification, the sorption of Cs(I) and Sr(II) is compared with pristine support under different operating conditions: the pH effect, kinetics, and isotherms are investigated in mono-component and binary solutions, before investigating the selectivity (against competitor metals) and the possibility to reuse the sorbent. The functionalized sorbent shows a preference for Sr(II), enhanced sorption capacities, a higher stability at recycling, and greater selectivity against alkali, alkaline-earth, and heavy metal ions. Finally, the sorption properties are compared for Cs(I) and Sr(II) removal in a complex solution (seawater sample). The combination of these results confirms the superiority of phosphonated sorbent over pristine support with promising performances to be further evaluated with effluents containing radionuclides.

Design of biomass-based renewable materials for environmental remediation

Various materials have been used to remove environmental contaminants for decades and have been an effective strategy for environmental cleanups. The current nonrenewable materials used for this purpose could impose secondary hazards and challenges in further downstream treatments. Biomass-based materials present viable, renewable, and sustainable solutions for environmental remediation. Recent biotechnology advances have developed biomaterials with new capacities, such as highly efficient biodegradation and treatment train integration. This review systemically discusses how biotechnology has empowered biomass-derived and bioinspired materials for environmental remediation sustainably and cost-effectively.

Functionality screening to help design effective materials for radioiodine abatement

This paper is part of a growing body of research work looking at the synthesis of an optimal adsorbent for the capture and containment of aqueous radioiodine from nuclear fuel reprocessing waste. 32 metalated commercial ion exchange resins were subjected to a two-tier screening assessment for their capabilities in the uptake of iodide from aqueous solutions. The first stage determined that there was appreciable iodide capacity across the adsorbent range (12–220 mg·g⁻¹). Candidates with loading capacities above 40 mg·g⁻¹ were progressed to the second stage of testing, which was a fractional factorial experimental approach. The different adsorbents were treated as discrete variables and concentrations of iodide, co-contaminants and protons (pH) as continuous variables. This gave rise to a range of extreme conditions, which were representative of the industrial challenges of radioiodine abatement. Results were fitted to linear regression models, both for the whole dataset (R² = 59%) and for individual materials (R² = 18–82%). The overall model determined that iodide concentration, nitrate concentration, pH and interactions between these factors had significant influences on the uptake. From these results, the top six materials were selected for project progression, with others discounted due to either poor uptake or noticeable iodide salt precipitation behaviour. These candidates exhibited reasonable iodide uptake in most experimental conditions (average of >20 mg·g⁻¹ hydrated mass), comparing favourably with literature values for metallated adsorbents. Ag-loaded Purolite S914 (thiourea functionality) was the overall best-performing material, although some salt precipitation was observed in basic conditions. Matrix effects not withstanding it is recommended that metalated thiourea, bispicolylamine, and aminomethylphosphonic acid functionalized silicas warrant further exploration.

Rapid detection of heterocyclic aromatic amines in cakes by digital imaging colorimetry based on magnetic solid phase extraction with sulfonated hyper-cross-linked polymers

To improve the hydrophobicity and poor separability of hyper-cross-linked polymers (HCPs) in extraction, a porous magnetic adsorbent (Fe₃O₄@SHCP) was constructed by facile post-modification to introduce sulfonic acid groups and magnetic nanoparticles for the magnetic solid-phase extraction of heterocyclic aromatic amines (HAAs). Owing to the double extraction mechanism adopted by Fe₃O₄@SHCP, it has a high extraction efficiency for HAAs. Coupled with high-performance liquid chromatography (HPLC), 5 HAAs in baked cakes were detected at one time. Under optimal extraction conditions, the enrichment factor of HAAs was up to 952-986, with LODs at 0.05-0.3 ng·g^-1. Based on the HPLC method, novel digital imaging colorimetry (DIC) was developed to accurately and rapidly monitor HAAs in cakes. Additionally, the established DIC method has been used to successfully evaluate the effect of baking temperature and duration on HAAs in baked cakes.

Unravelling the origin of long-term stability for Cs+ and Sr2+ solidification inside sodalite

Cesium (Cs⁺) and strontium (Sr²⁺) ions are the main fission byproducts in the reprocessing of spent nuclear fuels for nuclear power plants. Their long half-live period (30.17 years for ¹³⁷Cs and 28.80 years for ⁹⁰Sr) makes them very dangerous radionuclides. Hence the solidification of Cs⁺ and Sr²⁺ is of paramount importance for preventing them from entering the human food chain through water. Despite tremendous efforts for solidification, the long-term stability remains a great challenge due to the experimental limitation and lack of good evaluation indicators for such long half-life radionuclides. Using density functional theory (DFT), we investigate the origin of long-term stability for the solidification of Cs⁺ and Sr²⁺ inside sodalite and establish that the exchange energy and the diffusion barrier play an important role in gaining the long-term stability both thermodynamically and kinetically. The acidity/basicity, solvation, temperature, and diffusion effect are comprehensively studied. It is found that solidification of Cs⁺ and Sr²⁺ is mainly attributed to the solvation effect, zeolitic adsorption ability, and diffusion barriers. The present study provides theoretical evidence to use geopolymers to adsorb Cs⁺ and Sr²⁺ and convert the adsorbed geopolymers to zeolites to achieve solidification of Cs⁺ and Sr²⁺ with long-term stability.

Porous carbon black-polymer composites for volatile organic compound adsorption and efficient microwave-assisted desorption

Adsorbents with high surface area, thermal stability and microwave absorption ability are highly desired for cyclic adsorption and microwave regeneration processes. However, most polymeric adsorbents are transparent to microwaves. Herein, porous hyper-crosslinked polymers (HCP) of (4,4'-bis((chloromethyl)-1,1'-biphenyl-benzyl chloride)) with different carbon black (CB) contents were synthesized via the Friedel-Crafts reaction. CB was selected as the filler due to its low cost and high dielectric loss and was embedded inside the polymer structure during polymerization. CB-containing composites showed enhanced thermal stability at elevated temperatures, and more than a 90-times increase in the dielectric loss factor, which is favorable for microwave regeneration. Nitrogen physisorption analysis by the Bruner-Emmett-Teller isotherms demonstrated that CB presence in the polymer structure nonlinearly decreases the surface area and total pore volume (by 38% and 26%, respectively at the highest CB load). Based on the characterization testing, 4 wt% of CB was found to be an optimum filler content, having the highest MW absorption and minimal effect on the adsorbent porosity. HCP with 4 wt% CB allowed a substantial increase in the desorption temperature and yielded more than a 450% enhancement in the desorption efficiency compared to HCP without CB.

Carboxymethyl carrageenan immobilized on 3D-printed polycaprolactone scaffold for the adsorption of calcium phosphate/strontium phosphate adapted to bone regeneration

Three dimensional (3D) substrates based on natural and synthetic polymers enhance the osteogenic and mechanical properties of the bone tissue engineering scaffolds. Here, a novel bioactive composite scaffolds from polycaprolactone /kappa-carrageenan were developed for bone regeneration applications. 3D PCL scaffolds were fabricated by 3D printing method followed by coating with carboxymethyl kappa-carrageenan. This organic film was used to create calcium and strontium phosphate layers via a modified alternate soaking process in CaCl ₂ /SrCl ₂ and Na₂HPO₄ solutions in which calcium ions were replaced by strontium, with different amounts of strontium in the solutions. Various characterization techniques were executed to analyze the effects of strontium ion on the scaffold properties. The morphological results demonstrated the highly porous with interconnected pores and uniform pore sizes scaffolds. It was indicated that the highest crystallinity and compressive strength were obtained when 100% CaCl₂ was replaced by SrCl₂ in the solution (P-C-Sr). Incorporation of Sr onto the structure increased the degradation rate of the scaffolds. Mesenchymal stem cells (MSCs) culture on the scaffolds showed that Sr effectively improved attachment and viability of the MSCs and accelerated osteogenic differentiation as revealed by Alkaline phosphatase activity, calcium content and Real Time-Reverse transcription polymerase chain reaction assays.

Nanostructured Hypercrosslinked Porous Organic Polymers: Morphological Evolution and Rapid Separation of Polar Organic Micropollutants

Nanostructured hypercrosslinked porous organic polymers have triggered immense research interest for a broad spectrum of applications ranging from catalysis to molecular separation. However, it still remains a challenge to tune their nanoscale morphology. Herein, we demonstrated a remarkable variation of morphologies of triptycene-based hypercrosslinked microporous polymers starting from irregular aggregates (FCTP) to rigid spheres (SCTP) to two-dimensional nanosheets (SKTP) from three distinct polymerization methodologies, Friedel-Crafts knitting using an external crosslinker, Scholl reaction, and solvent knitting, respectively. Further, the dramatic role of reaction temperatures, catalysts, and solvents resulting in well-defined morphologies was elucidated. Mechanistic investigations coupled with microscopic and computational studies revealed the evolution of 2D nanosheets of a highly porous solvent-knitted polymer (SKTP, 2385 m² g^-1), resulting from the sequential hierarchical self-assembly of nanospheres and nanoribbons. A structure-activity correlation of hypercrosslinked polymers and their sulfonated counterparts for the removal of toxic polar organic micropollutants from water was delineated based on the chemical functionalities, specific surface area, pore size distribution, dispersity, and nanoscale morphology. Furthermore, a sulfonated 2D sheet-like solvent-knitted polymer (SKTPS) exhibited rapid adsorption kinetics (within 30 s) for a large array of polar organic micropollutants, including plastic components, steroids, antibiotic drugs, herbicides, and pesticides with remarkable uptake capacity and excellent recyclability. The current study provides the impetus for designing morphology-controlled functionalized porous polymers for task-specific applications.

Rapid Cs+ Capture via Multiple Supramolecular Interactions in Anionic Metal-Organic Framework Isomers

Metal-organic frameworks (MOFs) provide an ideal platform for ion exchange due to their high porosity and structural designability; however, developing MOFs that have the essential characteristics for ion exchange remains a challenge. These crucial features include fast kinetics, selectivity, and stability. We present two anionic isomers, DGIST-2 (2D) and DGIST-3 (3D), comprising distinctly arranged 5-(1,8-naphthalimido)isophthalate ligands and In³⁺ cations. Interestingly, in protic solvents, DGIST-2 transforms into a hydrolytically stable crystalline phase, DGIST-2'. DGIST-2' and DGIST-3 exhibit rapid Cs⁺ adsorption kinetics, as well as high Cs⁺ affinity in the presence of competing cations. The mechanism for rapid and selective sorption is explored based on the results of single-crystal X-ray diffraction analysis of Cs⁺-incorporated DGIST-3. In Cs⁺-containing solutions, the loosely incorporated dimethylammonium countercation of the anionic framework is replaced by Cs⁺, which is held in the hydrophobic cavity by supramolecular ion-ion and cation-π interactions.

A Novel Alternative Methods for Decalcification of Water Resources Using Green Agro-Ashes

The strategic idea in this work was to increase pH values by employing natural alkali sources (i.e., HCO₃⁻ and CO₃²⁻) from four tested agro-ashes as an alternative to chemicals (i.e., lime or soda ash). The considerable proportion of carbonates and bicarbonates in the investigated ash products had remarkable features, making them viable resources. All ash materials showed a significant ability for Ca ion elimination at high initial Ca ion concentrations. A slight quantity of ash (10 g/L) was sufficient for usage on very hard water contents up to 3000 ppm. Finally, the tested agro-ash was free of cost. Furthermore, unlike other conventional precipitants, such as NaOH, Ca(OH)₂, NaHCO₃, Na₂CO₃, and CaO, they are cost effective and ecologically sustainable. There is no need to employ any additional chemicals or modify the agro-ash materials throughout the treatment process. The benefits of the manufactured ash were assessed using a SWOT analysis.

Decontamination of radioactive cesium-contaminated soil/concrete with washing and washing supernatant- critical review

We reviewed washing of radioactive Cs-contaminated concrete and soil based on the fate of Cs in concrete and soil, including sorption materials for treatment of supernatant solution. In non-aged cement materials (the calcium silicate hydration (C-S-H) phase), it was possible to decontaminate Cs using ion exchange with monovalent cations, such as NH₄⁺. The clay components in the soil and aggregates were important factors in optimization of the efficiency and mechanism for Cs decontamination with washing solution. The parameters (reagent component, pH, and temperature) of the washing solution should be determined considering soil mineral type (here, weathered biotite (WB) with vermiculite), since monovalent cations such as NH₄⁺ and K⁺ can inhibit Cs decontamination due to collapse of the hydrated and expanded interlayer regions with cation exchange. In this case, hydrothermal treatment or H₂O₂ dosing was necessary to expand the collapsed interlayer region for Cs removal by washing with cation exchange or organic acids. Acid and a chelating agent significantly enhanced Cs-release with dissolution of the adsorbent layer containing iron and aluminum oxides. The important characteristics of important and emerging sorption materials for treatment of the radioactive Cs-contaminated supernatant after washing treatment are discussed. Sorbents for treatment of washing supernatant are divided in to two main categories. Clay minerals, metal hexacyanoferrates, and ammonium molybdophosphates are discussed in the inorganic class of materials. Hypercrosslinked polymers, supramolecular sorbents, carbon nanotubes, and graphene oxide are covered in the carbon-based sorbents for Cs removal from water.

Removal of hazardous dyes, toxic metal ions and organic pollutants from wastewater by using porous hyper-cross-linked polymeric materials: A review of recent advances

Water quality plays a central role in the well-being of all the living organisms on planet Earth. The ever-increasing human population and consequently increasing industrialization, urbanization, and chemically boosted cultivation are rapidly contaminating already stressed water resources. The availability of clean drinking water has become scarce for masses across the globe, and this situation is becoming alarming in developing countries. Therefore, the immediate need for cost-effective, easily accessible, eco-friendly, portable, thermally efficient, and chemically stable technologies and materials is desperately felt to meet the high global demand for clean water. To search for effective materials for wastewater treatment, the hyper-cross-linked porous polymers (HCPs) have emerged as an excellent class of porous materials for wastewater treatment due to their unique features of high surface area, tunability, biodegradability, and chemical versatility. This review describes the advances in fabrication strategies and the efficient utilization of hyper-cross-linked porous polymers for wastewater treatment. Moreover, this review specifically discusses the hyper-cross-linked porous polymers effectiveness for the separation of the dyes, nutrients, inorganic ions, organic contaminants, and toxic metals ions. Finally, the review provides insight into the challenges and prospects in the area of hyper-cross-linked porous polymers. Overall, the hyper-cross-linked porous polymers with empowering proper functionalization can provide an opportunity for the wastewater treatment not only to remove toxic contaminants but also to make contaminated water useful for various applications.

A Pressure Swing Approach to Selective CO2 Sequestration Using Functionalized Hypercrosslinked Polymers

Functionalized hypercrosslinked polymers (HCPs) with surface areas between 213 and 1124 m²/g based on a range of monomers containing different chemical moieties were evaluated for CO₂ capture using a pressure swing adsorption (PSA) methodology under humid conditions and elevated temperatures. The networks demonstrated rapid CO₂ uptake reaching maximum uptakes in under 60 s. The most promising networks demonstrating the best selectivity and highest uptakes were applied to a pressure swing setup using simulated flue gas streams. The carbazole, triphenylmethanol and triphenylamine networks were found to be capable of converting a dilute CO₂ stream (>20%) into a concentrated stream (>85%) after only two pressure swing cycles from 20 bar (adsorption) to 1 bar (desorption). This work demonstrates the ease with which readily synthesized functional porous materials can be successfully applied to a pressure swing methodology and used to separate CO₂ from N₂ from industrially applicable simulated gas streams under more realistic conditions.

Kinetic Studies of Cs+ and Sr2+ Ion Exchange Using Clinoptilolite in Static Columns and an Agitated Tubular Reactor (ATR)

Natural clinoptilolite was studied to assess its performance in removing caesium and strontium ions, using both static columns and an agitated tube reactor (ATR) for process intensification. Kinetic breakthrough curves were fitted using the Thomas and Modified Dose Response (MDR) models. In the static columns, the clinoptilolite adsorption capacity (qe) for 200 ppm ion concentrations was found to be ~171 and 16 mg/g for caesium and strontium, respectively, highlighting the poor material ability to exchange strontium. Reducing the concentration of strontium to 100 ppm, however, led to a higher strontium qe of ~48 mg/g (close to the maximum adsorption capacity). Conversely, halving the column residence time to 15 min decreased the qe for 100 ppm strontium solutions to 13–14 mg/g. All the kinetic breakthrough data correlated well with the maximum adsorption capacities found in previous batch studies, where, in particular, the influence of concentration on the slow uptake kinetics of strontium was evidenced. For the ATR studies, two column lengths were investigated (of 25 and 34 cm) with the clinoptilolite embedded directly into the agitator bar. The 34 cm-length system significantly outperformed the static vertical columns, where the adsorption capacity and breakthrough time were enhanced by ~30%, which was assumed to be due to the heightened kinetics from shear mixing. Critically, the increase in performance was achieved with a relative process flow rate over twice that of the static columns.

Effective pretreatment of lignocellulosic co-substrates using barley straw-adapted microbial consortia to enhanced biomethanation by anaerobic digestion

Microbial pretreatments have been identified as a compatible and sustainable process with anaerobic digestion compared to energy-intensive physicochemical pretreatments. In this study, barley straw and hay co-substrate was pretreated with a microaerobic barley straw-adapted microbial (BSAM) consortium prior to anaerobic digestion. The improved digestibility was investigated through 16S rRNA gene sequencing, microbial counts and C:N ratios. BSAM pretreatment resulted in 15.2 L kg^-1 TS of methane yield after 35 days, almost 40 times more than the control. The methane content in total biogas produced were 58% (v/v) and 10% (v/v) in BSAM and control, respectively. This research demonstrated that BSAM-based pretreatment significantly increased the digestibility and surface area of the lignocellulosic material and considerably enhanced biomethanation. This study generates new potential bio-research opportunities in the emerging field of lignocellulosic anaerobic digestion-biorefineries.

The effect of cationic surfactants on improving natural clinoptilolite for the flotation of cesium

Flotation using cationic surfactants has been investigated as a rapid separation technique to dewater clinoptilolite ion exchange resins, for the decontamination of radioactive cesium ions (Cs⁺) from nuclear waste effluent. Initial kinetic and equilibrium adsorption studies of cesium, suggested the large surface area to volume ratio of the fine zeolite contributed to fast adsorption kinetics and high capacities (q_c = 158.3 mg/g). Adsorption of ethylhexadecyldimethylammonium bromide (EHDa-Br) and cetylpyridinium chloride (CPC) surfactant collectors onto both clean and 5 ppm Cs⁺ contaminated clinoptilolite was then measured, where distribution coefficients (K_d) as high as 10,000 mL/g were evident with moderate concentrations CPC. Measurements of particle sizes confirmed that adsorption of surfactant monolayers did not lead to significant aggregation of the clinoptilolite, while < 8% of the 5 ppm contaminated cesium was remobilised. Importantly for flotation, both the recovery efficiency and dewatering ratios were measured across various surfactant concentrations. Optimum conditions were found with 0.5 mM of CPC and addition of 30 μL of MIBC frother, giving a recovery of ∼90% and a water reduction ratio > 4, highlighting the great viability of flotation to separate and concentrate the contaminated powder in the froth phase.

Superadsorbents for Strontium and Cesium Removal Enriched in Amidoxime by a Homo-IPN Strategy Connected with Porous Silica Texture

In light of the fact that two with good compatibility are better than one, the homo-interpenetrating polymer network (IPN) strategy was used in this work to design novel amidoxime (AOX)-interpenetrating networks into porous silica (PSi) with the final aim to enhance the sorption performances of composite sorbents toward Cs⁺ and Sr²⁺. To achieve this goal, first, a homo-IPN of poly(acrylonitrile) (PAN) was constructed inside the channels of two kinds of porous silica, one mesoporous (PSi1) and one macroporous (PSi2), the textural properties of silica being exploited in controlling the sorption performances of the composites. The novel composites were fully characterized by thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and the nitrogen sorption/desorption isotherms (Brunauer-Emmett-Teller (BET) analysis). The sorption properties of the PSi1/AOX and PSi2/AOX composite sorbents for Sr²⁺ and Cs⁺ were investigated in the batch mode to determine the effect of solution pH, contact time, initial metal ion concentration, temperature, and the presence of competitive ions on the adsorption performances. The fast kinetics of sorption was supported by the fact that ∼80% of Sr²⁺ and ∼65% of Cs⁺ were adsorbed in the first 30 min, the kinetic data being better described by the pseudo-second-order kinetic model. The experimental isotherms were well fitted by the Langmuir and Sips isotherm models. The superadsorption of Sr²⁺ and Cs⁺ is demonstrated by the values of the maximum sorption capacity of the best sorbent constructed with mesoporous silica (PSi1/IPN-AOX), which were 344.23 mg Cs⁺/g and 360.23 mg Sr²⁺/g. The sorption process was spontaneous and endothermic for both metal ions. The presence of interfering cations (Na⁺, K⁺, Ca²⁺, and Mg²⁺), at a concentration of 10^-2 M, only slightly influenced the sorption capacity for the main cation. The composite sorbents were still highly efficient after five sorption/desorption cycles.

Sulfur-Decorated Hyper-Cross-Linked Coal Tar: A Microporous Organic Polymer for Efficient and Expeditious Mercury Removal

Hyper-cross-linked microporous organic polymers are a class of porous materials that have captured widespread attention owing to their high surface areas and wide range of monomeric sources. Balancing economy with performance is the initial hurdle when designing effective hyper-cross-linked microporous organic polymers. Herein, we demonstrated an inexpensive sulfurated solvent-knitted hyper-cross-linked microporous polymer scaffold, named sulfur-decorated hyper-cross-linked coal tar (CTHP-SES), utilizing coal tar as an aromatic monomer with numerous positions for potential chelation of toxic metals, particularly mercury, from water. The resulting material illustrated selective adsorption of mercury from both water (1037 mg g^-1) and the gas phase (416 mg g^-1) with rapid kinetics (183.67 mg min^-1 g^-1), good recyclability (4 runs), and excellent stability under both strong basic and acidic conditions. CTHP-SES was able to reduce the concentration of the Hg(II) solution from 1 mg L^-1 to 32 μg L^-1 after 10 min due in part to the promising distribution coefficient (K_d = 2.371 × 10⁶ mL g^-1). These results show that CTHP-SES offers a promising and practical platform to cope with a variety of environmental contaminations.

Combined use of tannic acid-type organic composite adsorbents and ozone for simultaneous removal of various kinds of radionuclides in river water

Tannic acid-type organic composite adsorbents (PA316TAS, AR-01TAS, PYRTAS, WA10TAS, WA20TAS, and WA30TAS), combined with hydrolyzed and sulfonated tannic acid (TAS) and porous-type strongly basic anion-exchange resin (PA316), benzimidazole-type anion-exchange resin embedded in high-porous silica beads (AR-01), pyridine-type anion-exchange resin (PYR), acrylic-type weakly basic anion-exchange resin (WA10), or styrene-type weakly basic anion-exchange resins (WA20 and WA30) for simultaneous removal of various kinds of radionuclides in river water were successfully synthesized. The adsorption behavior of twelve kinds of simulated radionuclides (Mn, Co, Sr, Y, Ru, Rh, Sb, Te, Cs, Ba, Eu, and I (I^- and IO₃^-)) on these composite adsorbents has been studied in real river water at room temperature. PA316TAS adsorbents showed much higher distribution coefficients (K_d) for all metal ions. TAS structure has more selective adsorption ability for Mn, Co, Sr, Y, Cs, Ba, Eu, and IO₃^-. On the other hand, Y, Ru, Rh, Sb, Te, Eu, I (I^- and IO₃^-) were adsorbed on both PA316 and TAS structures. To evaluate the validity of these mechanistic expectations, the respective chemical adsorption behaviors of Mn, Co, Sr, etc. and PA316TAS adsorbent were examined in river water ranging in temperature from 278 to 333 K. As was expected, one adsorption mechanism for Mn, Co, Sr, Cs, and Ba systems and two types of adsorption mechanisms for Y, Ru, Rh, Sb, Te, Eu, I (I^- and IO₃^-) systems were observed. On the other hand, the precipitation of Mn, Co, Y, Ru, Rh, Te, and Eu was formed by ozonation for river water, that is, ozone can transform Mn, Co, Y, Ru, Rh, Te, and Eu ions into the insoluble precipitates. Hence, one straight line for Sr, Cs, Ba systems and two types of straight lines for Sb, I (I^- and IO₃^-) systems were obtained in river water treated with ozone. The chromatography experiments of Cs, Sr, I (I^- and IO₃^-) were carried out to calculate their maximum adsorption capacities. The obtained maximum adsorption capacities of Cs, Sr, and I^- mixed with IO₃^- were 1.7 × 10^-4 (Cs), 1.8 × 10^-3 (Cs/O₃), 7.8 × 10^-5 (Sr), 5.6 × 10^-4 (Sr/O₃), 5.4 × 10^-2 (I^- and IO₃^-), 3.1 × 10^-2 (I^- and IO₃^-/O₃) mol/g - PA316TAS. It was discovered that the maximum adsorption capacities of I^- and IO₃^- for the composite adsorbent is unprecedented high and the capacity become much greater than an order of magnitude, compared with those of previous reports. This phenomenon suggests the formation of electron-donor-acceptor (EDA) complexes or pseudo EDA complex. Based on these results, it was concluded that the combined use of tannic acid-type organic composite adsorbents and ozone made it possible to remove simultaneously and effectively various kinds of radionuclides in river water in the wide pH and temperature ranges.

Caesium adsorption on a zeolitic imidazolate framework (ZIF-8) functionalized by ferrocyanide

¹³⁷Cs is one of the most hazardous radionuclides in nuclear waste owing to its toxicity. Developing an adsorbent for Cs⁺ with a high capacity and selectivity is a challenging task. A metal-organic framework (MOF) is a material with a high surface area that has been widely applied in wastewater treatment. Exploiting the affinity between ferrocyanide (FC) and Cs⁺, zeolitic imidazolate framework-8 (ZIF-8) was chemically functionalized with FC, ZIF-8-FC to selectively capture Cs⁺. After functionalization, ZIF-8-FC has a hollow morphology and small FC related crystals, which might result in better migration of Cs⁺ inside ZIF-8-FC. This synergistic effect was proven by the Q_max of ZIF-8-FC, 422.42 mg g^-1, which is 15.9 times higher than that of ZIF-8. Additionally, ZIF-8-FC retained its good adsorption performance within a pH range of 3-11 and an excellent Cs⁺ selectivity even in artificial seawater conditions. The structure of ZIF-8-FC after adsorption proves its stability. Furthermore, the thermodynamic adsorption implied that higher temperatures are more favorable for Cs⁺ uptake. This work demonstrates the remarkable adsorption and selectivity of ZIF-8-FC, which make it a promising candidate for remediation of radioactive Cs⁺.