High-Performance Flexible Ultraviolet Photodetectors Based on AZO/ZnO/PVK/PEDOT:PSS Heterostructures Integrated on Human Hair

Wide Bandgap Semiconductors for Ultraviolet Photodetectors: Approaches, Applications, and Prospects

Ultraviolet (UV) light, invisible to the human eye, possesses both benefits and risks. To harness its potential, UV photodetectors (PDs) have been engineered. These devices can convert UV photons into detectable signals, such as electrical impulses or visible light, enabling their application in diverse fields like environmental monitoring, healthcare, and aerospace. Wide bandgap semiconductors, with their high-efficiency UV light absorption and stable opto-electronic properties, stand out as ideal materials for UV PDs. This review comprehensively summarizes recent advancements in both traditional and emerging wide bandgap-based UV PDs, highlighting their roles in UV imaging, communication, and alarming. Moreover, it examines methods employed to enhance UV PD performance, delving into the advantages, challenges, and future research prospects in this area. By doing so, this review aims to spark innovation and guide the future development and application of UV PDs.

Dipole Field-Driven Organic-Inorganic Heterojunction for Highly Sensitive Ultraviolet Photodetector

Developing high-performance organic-inorganic ultraviolet (UV) photodetectors (PDs) has attracted considerable attention. However, this development has been hindered due to poor directional charge-transfer ratios in transport layers, excessive costs, and an ambiguous underlying mechanism. To tackle these challenges, we constructed a heterojunction of economic Mg-doped ZnO (MgZnO) nanorods and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) [PEDOT:PSS (P:P)] that utilizes dipole field-driven spontaneous polarization to enhance photogenerated charge kinetics. As a result, the proposed heterojunction has an improved noise equivalent power of 3.16 × 10-11 W Hz-1/2), a normalized detection rate (D*) of 8.96 × 109 jones, and external quantum efficiency comparable to other ZnO-based devices. Notably, the prepared PDs showed a photocurrent of 4.8 × 10-3 μA under a faint UV light having an intensity of 1 × 10-5 W cm-2, exceeding the performance of the most state-of-the-art ZnO-based UV sensors. The introduction of Mg into ZnO is responsible for the high performance, as it causes a lattice mismatch and distortion of the Mg-doped ZnO unit cell. It results in improved dipole movement and the creation of a dipole field, accelerating the directional electron-transfer process. Using a dipole field to manipulate the migration and transport of photogenerated carriers represents a promising approach for achieving outstanding performance in UV PDs.

Recent Progress in Hair Science and Trichology

Hair is important to our appearance as well as to protect our heads. Human hair mainly consists of proteins (80-85%), melanin pigments (0-5%), water (10-13%), and lipids (1-6%). The physicochemical properties of hair have been studied for over 100 years. However, they are not yet thoroughly understood. In this review, recent progress and the latest findings are summarized from the following three perspectives: structural characteristics, delivery and distribution of active ingredients, and hair as a template. The structural characteristics of hair have been mainly investigated by microscopic and/or spectroscopic techniques such as atomic force microscopy integrated with infrared spectroscopy (AFM-IR) and rheological measurements. The distribution of active ingredients has been generally evaluated through techniques such as nanoscale secondary ion mass spectrometry (NanoSIMS). And finally, attempts to explore the potential of hair to be used as a substrate for flexible device fabrication will be introduced.

Integrating High-Sensitivity Photodetector and High-Energy Aqueous Battery in All-in-One Triple-Twisted Fiber

Fiber-shaped photodetectors (FPDs) have attracted special attention to wearable health monitoring due to their 3D absorption capabilities. However, the practical application of traditional FPDs is severely limited by the irreversible degradation of performance caused by vulnerable interface compatibility on complex deformation and a single function. Here, an integrated photoelectrochemical FPD/battery device (FPDB) is designed, consisting of a common electrode, photoanode, anode, and sol-gel electrolyte as an isolation layer, which not only effectively avoids the short circuit problem of FPD but also endows high-efficiency energy storage capacity. As expected, the resulting all-in-one triple-twisted fiber-shaped FPDB simultaneously achieves high responsiveness of 151.45 mA W-1 and excellent volume capacity of 18.75 mAh cm-3. Such a stable architectural design and multifunctional integration of functional fibers accelerate the development of next-generation wearable fabrics.

Toward Industrial Production of a High-Performance Self-Powered Ultraviolet Photodetector Using Nanoporous Al-Doped ZnO Thin Films

Al-doped ZnO (AZO) thin films are effective n-type semiconductors for ultraviolet (UV) detection because of their low cost, high electron mobility, and high sensitivity to UV light, especially in the UVA spectrum. However, a reasonable compromise between performance (such as sensitivity, detectivity, and response time) and fabrication ease remains an obstacle to the practicability of AZO-based UV photodetectors. To address this issue, we propose an efficient strategy to achieve a large AZO photoactive area for outstanding performance, along with a facile sol-gel method. Consequently, the device exhibits a superb on/off ratio of >104, a high detectivity of 1.85 × 1012 Jones, and a fast response speed under 365 nm UVA illumination without external energy consumption. Hence, this study suggests a self-powered and high-performance nanoporous AZO-based UVA detector with an environmentally friendly scalable process that satisfies industrial production requirements for numerous practical UV-detection applications.

Developing low-cost nanohybrids of ZnO nanorods and multi-shaped silver nanoparticles for broadband photodetectors

Photodetectors are essential elements for various applications like fiber optic communication systems, biomedical imaging, and so on. Thus, improving the performance and reducing the material costs of photodetectors would act as a motivation toward the future advancement of those applications. This study introduces the development of a nanohybrid of zinc oxide nanorods (ZnONRs) and multi-shaped silver nanoparticles MAgNPs through a simple solution process; in which ZnONRs are hybridized with MAgNPs to enable visible absorption through the surface plasmon resonance (SPR) effect. The photodetector based on ZnONRs/MAgNPs is responsive to visible light with representative wavelengths of 395, 464, 532 and 640 nm, and it exhibits high responsivity (R), photoconductive gain (G) and detectivity (D). The maximum R is calculated from the fitting curve of the responsivity-power relation with the value of 5.35 × 10³ (mA W^-1) at 395 nm excitation. The highest G and D reach 8.984 and 3.71 × 10¹⁰ Jones at that wavelength. This reveals the promise of our innovative broadband photodetector for practical usage.

All-in-One Optoelectronic Logic Gates Enabled by Bipolar Spectral Photoresponse of CdTe/SnSe Heterojunction

Optoelectronic logic gate devices (OLGDs) have attracted significant attention in high-density information processors; however, multifunctional logic operation in a single device is technically challenging due to the unidirectional electrical transport. In this work, we deliberately design all-in-one OLGDs based on self-powered CdTe/SnSe heterojunction photodetectors. The SnSe nanorod (NR) array is grown on the sputtered CdTe film via a glancing-angle deposition technique to form a heterojunction device. At the interface, the photovoltaic (PV) effect in the CdTe/SnSe heterojunction and the photothermoelectric (PTE) effect from the SnSe NRs are combined together to induce the reversed photocurrent, leading to a unique bipolar spectral response. The competition between PV and PTE in different spectral ranges is thus employed to control the photocurrent polarity, and five basic logic gates of OR, AND, NAND, NOR, and NOT can be performed just with a single heterojunction. Our findings indicate the large potentials of the CdTe/SnSe heterojunctions as logic units in next-generation sensing-computing systems.

Research advances in ZnO nanomaterials-based UV photode tectors: a review

Ultraviolet photodetectors (UV PDs) have always been the research focus of semiconductor optoelectronic devices due to their wide application fields and diverse compositions. As one of the best-known n-type metal oxides in third-generation semiconductor electronic devices, ZnO nanostructures and their assembly with other materials have received extensive research. In this paper, the research progress of different types of ZnO UV PDs is reviewed, and the effects of different nanostructures on ZnO UV PDs are summarized in detail. In addition, physical effects such as piezoelectric photoelectric effect, pyroelectric effect, and three ways of heterojunction, noble metal local surface plasmon resonance enhancement and formation of ternary metal oxides on the performance of ZnO UV PDs were also investigated. The applications of these PDs in UV sensing, wearable devices, and optical communication are displayed. Finally, the possible opportunities and challenges for the future development of ZnO UV PDs are prospected.

Photoelectrochemical Conversion of Sewage Water into H2 Fuel over the CuFeO2/CuO/Cu Composite Electrode

This study describes the synthesis of delafossite, CuFeO2, as a primary photocatalytic material for hydrogen generation. A photoelectrode, CuFeO2/CuO/Cu, was prepared by combusting a Cu foil dipped in FeCl3 in ambient air. This photoelectrode showed excellent optical behavior for the hydrogen generation reaction from sewage water, producing 90 µmol/h of H2. The chemical structure was confirmed through XRD and XPS analyses, and the crystalline rhombohedral shape of CuFeO2 was confirmed using SEM and TEM analyses. With a bandgap of 1.35 ev, the prepared material displayed excellent optical properties. Electrochemical measurements for H2 gas generation were carried out using the CuFeO2/CuO/Cu photoelectrode, comparing the effect of light and dark and monochromatic wavelength light. The electrode exhibited significant enhancement in light compared to dark, with current density (Jph) values of −0.83 and −0.1 mA·cm−2, respectively. The monochromatic light also had a noticeable effect, with the Jph value increasing from −0.45 to −0.79 mA·cm−2 as the wavelength increased from 640 to 390 nm. This system is cheap and durable, making it a promising solution for hydrogen gas fuel generation in the industry.

Soft Fiber Electronics Based on Semiconducting Polymer

Fibers, originating from nature and mastered by human, have woven their way throughout the entire history of human civilization. Recent developments in semiconducting polymer materials have further endowed fibers and textiles with various electronic functions, which are attractive in applications such as information interfacing, personalized medicine, and clean energy. Owing to their ability to be easily integrated into daily life, soft fiber electronics based on semiconducting polymers have gained popularity recently for wearable and implantable applications. Herein, we present a review of the previous and current progress in semiconducting polymer-based fiber electronics, particularly focusing on smart-wearable and implantable areas. First, we provide a brief overview of semiconducting polymers from the viewpoint of materials based on the basic concepts and functionality requirements of different devices. Then we analyze the existing applications and associated devices such as information interfaces, healthcare and medicine, and energy conversion and storage. The working principle and performance of semiconducting polymer-based fiber devices are summarized. Furthermore, we focus on the fabrication techniques of fiber devices. Based on the continuous fabrication of one-dimensional fiber and yarn, we introduce two- and three-dimensional fabric fabricating methods. Finally, we review challenges and relevant perspectives and potential solutions to address the related problems.

Metal Electrode-Free Halide Perovskite-Based Flexible Ultraviolet-C Photodetector with Large Area

Ultraviolet-C (UVC) photodetector has appealed to a numerous number of research owing to its manifold applications in wireless communication, flame monitoring, and medicine. However, in addition to superior performance and high stability of recent studies, scalability and production cost are important factors for commercialization and practical implementation. In this study, a halide perovskite-based UVC photodetector was fabricated using spin-coating process and low-temperature annealing. Corning® Willow® Glass was selected as the substrate for the bottom-illuminated device due to its flexibility and exceptional optical transmission (approximately 60%) in the deep-UV region. The device had a vertical structure with a large active area (1 cm²) owing to the judicious utilization of electrodes. Under bent state with a curvature radius of 25 mm, the as-fabricated device exhibited high response and repeatability with an on/off ratio of 9.57 × 10³, a fast response speed of 45/46 ms (rise/fall times) at zero bias under the illumination of a 254-nm UV lamp. The results are based on a flexible and lightweight photodetector without the utilization of notable metal electrodes.

Upconversion under Photon Trapping in ZnO/BN Nanoarray: An Ultrahigh Responsivity Solar-Blind Photodetecting Paper

Solar-blind photodetectors (PDs) are widely applicable in special, military, medical, environmental, and commercial fields. However, high performance and flexible PD for deep ultraviolet (UV) range is still a challenge. Here, it is demonstrated that an upconversion of photon absorption beyond the energy bandgap is achieved in the ZnO nanoarray/h-BN heterostructure, which enables the ultrahigh responsivity of a solar-blind photodetecting paper. The direct growth of ultralong ZnO nanoarray on polycrystalline copper paper induced by h-BN 2D interlayer is obtained. Meanwhile, strong photon trapping takes place within the ZnO nanoarray forest through the cyclic state transition of surface oxygen ions, resulting in an extremely high absorption efficiency (> 99.5%). A flexible photodetecting paper is fabricated for switchable detections between near UV and deep UV signals by critical external bias. The device shows robust reliability, ultrahigh responsivity up to 700 A W^-1 @ 265-276 nm, and high photoconductive gain of ≈2 × 10³ . A negative differential resistance effect is revealed for driving the rapid transfer of up-converted electrons between adjacent energy valleys (Γ to A) above the critical bias (3.9 V). The discovered rationale and device structure are expected to bring high-efficiency deep UV detecting and future wearable applications.

Converting Sewage Water into H2 Fuel Gas Using Cu/CuO Nanoporous Photocatalytic Electrodes

This work reports on H₂ fuel generation from sewage water using Cu/CuO nanoporous (NP) electrodes. This is a novel concept for converting contaminated water into H₂ fuel. The preparation of Cu/CuO NP was achieved using a simple thermal combustion process of Cu metallic foil at 550 °C for 1 h. The Cu/CuO surface consists of island-like structures, with an inter-distance of 100 nm. Each island has a highly porous surface with a pore diameter of about 250 nm. X-ray diffraction (XRD) confirmed the formation of monoclinic Cu/CuO NP material with a crystallite size of 89 nm. The prepared Cu/CuO photoelectrode was applied for H₂ generation from sewage water achieving an incident to photon conversion efficiency (IPCE) of 14.6%. Further, the effects of light intensity and wavelength on the photoelectrode performance were assessed. The current density (J_ph) value increased from 2.17 to 4.7 mA·cm^-2 upon raising the light power density from 50 to 100 mW·cm^-2. Moreover, the enthalpy (ΔH*) and entropy (ΔS*) values of Cu/CuO electrode were determined as 9.519 KJ mol^-1 and 180.4 JK^-1·mol^-1, respectively. The results obtained in the present study are very promising for solving the problem of energy in far regions by converting sewage water to H₂ fuel.

Flexible Wearables for Plants

The excellent stretchability and biocompatibility of flexible sensors have inspired an emerging field of plant wearables, which enable intimate contact with the plants to continuously monitor the growth status and localized microclimate in real-time. Plant flexible wearables provide a promising platform for the development of plant phenotype and the construction of intelligent agriculture via monitoring and regulating the critical physiological parameters and microclimate of plants. Here, the emerging applications of plant flexible wearables together with their pros and cons from four aspects, including physiological indicators, surrounding environment, crop quality, and active control of growth, are highlighted. Self-powered energy supply systems and signal transmission mechanisms are also elucidated. Furthermore, the future opportunities and challenges of plant wearables are discussed in detail.

Visible photodetector based on transition metal-doped ZnO NRs/PEDOT:PSS hybrid materials

A hybrid Cu-doped ZnO nanorods (ZnO:Cu NRs)/poly(3,4 ethylene dioxythiophene)-polystyrene sulfonate (PEDOT:PSS)-based photodetector was fabricated using a simple hydrothermal method with pre-patterned silver electrodes. In the hybrid structure, PEDOT:PSS with high mobility acts as a carrier transport layer, while ZnO:Cu NRs with high visible absorption works as an “antenna” material to generate electron–hole pairs under light illumination. As a result, the devices exhibits a high response in visible light at a wavelength of 395 nm. The responsivity and photoconductive gain of the hybrid photodetector reached 0.33 A W⁻¹ and 1.306, respectively, which is 1.36 times higher than those of Cu-doped ZnO NRs-based ones. The response and recovery times are improved, with values of 25.21 s and 42.01 s, respectively. The development of hybrid materials for visible photodetectors enables an innovative approach for future optoelectronic devices, especially optical sensors.

This study reports the fabrication of a hybrid photodetector based on Cu-doped ZnO NRs/PEDOT:PSS, which improves the device's performance and applications.

Nanoporous TiN/TiO2/Alumina Membrane for Photoelectrochemical Hydrogen Production from Sewage Water

An aluminum oxide, Al2O3, template is prepared using a novel Ni imprinting method with high hexagonal pore accuracy and order. The pore diameter after the widening process is about 320 nm. TiO2 layer is deposited inside the template using atomic layer deposition (ALD) followed by the deposition of 6 nm TiN thin film over the TiO2 using a direct current (DC) sputtering unit. The prepared nanotubular TiN/TiO2/Al2O3 was fully characterized using different analytical tools such as X-ray diffraction (XRD), Energy-dispersive X-ray (EDX) spectroscopy, scanning electron microscopy (SEM), and optical UV-Vis spectroscopy. Exploring the current-voltage relationships under different light intensities, wavelengths, and temperatures was used to investigate the electrode's application before and after Au coating for H2 production from sewage water splitting without the use of any sacrificing agents. All thermodynamic parameters were determined, as well as quantum efficiency (QE) and incident photon to current conversion efficiency (IPCE). The QE was 0.25% and 0.34% at 400 mW·cm-2 for the photoelectrode before and after Au coating, respectively. Also, the activation energy was 27.22 and 18.84 kJ·mol-1, the enthalpy was 24.26 and 15.77 J·mol-1, and the entropy was 238.1 and 211.5 kJ-1·mol-1 before and after Au coating, respectively. Because of its high stability and low cost, the prepared photoelectrode may be suitable for industrial applications.

Preparation of hexagonal nanoporous Al2O3/TiO2/TiN as a novel photodetector with high efficiency

The unique optical properties of metal nitrides enhance many photoelectrical applications. In this work, a novel photodetector based on TiO2/TiN nanotubes was deposited on a porous aluminum oxide template (PAOT) for light power intensity and wavelength detection. The PAOT was fabricated by the Ni-imprinting technique through a two-step anodization method. The TiO2/TiN layers were deposited by using atomic layer deposition and magnetron sputtering, respectively. The PAOT and PAOT/TiO2/TiN were characterized by several techniques such as X-ray diffraction (XRD), scanning electron microscope (SEM), and energy dispersive X-ray (EDX). The PAOT has high-ordered hexagonal nanopores with dimensions ~ 320 nm pore diameter and ~ 61 nm interpore distance. The bandgap of PAOT/TiO2 decreased from 3.1 to 2.2 eV with enhancing absorption of visible light after deposition of TiN on the PAOT/TiO2. The PAOT/TiO2/TiN as photodetector has a responsivity (R) and detectivity (D) of 450 mAW-1 and 8.0 × 1012 Jones, respectively. Moreover, the external quantum efficiency (EQE) was 9.64% at 62.5 mW.cm-2 and 400 nm. Hence, the fabricated photodetector (PD) has a very high photoelectrical response due to hot electrons from the TiN layer, which makes it very hopeful as a broadband photodetector.

Fiber‐Shaped Electronic Devices

Textile electronics embedded in clothing represent an exciting new frontier for modern healthcare and communication systems. Fundamental to the development of these textile electronics is the development of the fibers forming the cloths into electronic devices. An electronic fiber must undergo diverse scrutiny for its selection for a multifunctional textile, viz., from the material selection to the device architecture, from the wearability to mechanical stresses, and from the environmental compatibility to the end‐use management. Herein, the performance requirements of fiber‐shaped electronics are reviewed considering the characteristics of single electronic fibers and their assemblies in smart clothing. Broadly, this article includes i) processing strategies of electronic fibers with required properties from precursor to material, ii) the state‐of‐art of current fiber‐shaped electronics emphasizing light‐emitting devices, solar cells, sensors, nanogenerators, supercapacitors storage, and chromatic devices, iii) mechanisms involved in the operation of the above devices, iv) limitations of the current materials and device manufacturing techniques to achieve the target performance, and v) the knowledge gap that must be minimized prior to their deployment. Lessons learned from this review with regard to the challenges and prospects for developing fiber‐shaped electronic components are presented as directions for future research on wearable electronics.

Flexible ultraviolet photodetector based on single ZnO microwire/polyaniline heterojunctions

Flexible ultraviolet (UV) photodetectors are considered as potential building blocks for future-oriented photoelectric applications such as flexible optical communication, image sensors, wearable devices and so on. In this work, high-performance UV photodetector was fabricated via a facile combination of single ZnO microwire (MW) and p-type polyaniline. Due to the formation of effective organic/inorganic p-n junction, the as-prepared flexible UV photodetector based on ZnO MW/polyaniline hybrid heterojunction exhibits high performance (responsivity ∼ 60 mA/W and detectivity ∼ 2.0 ×10¹¹ Jones) at the reverse bias of -1 V under the UV illumination. The ZnO MW/polyaniline photodetector displays short response/recovery times (∼ 0.44 s/∼ 0.42 s), which is less than that of most reported UV photodetectors based on ZnO/polymer heterojunction. The fast response speed and recovery speed can be attributed to the high crystallinity of ZnO MW, built-in electric field in space-charge region and the passivation of oxygen traps on the surface. Further, the photodetector using ZnO MW/polyaniline junctions shows excellent flexibility and stability under bent conditions. This work opens a new way to design next-generation high-performance, low-cost and flexible optoelectronic devices for lab-on-a-chip applications.

A Portable and Flexible Self-Powered Multifunctional Sensor for Real-Time Monitoring in Swimming

A portable and flexible self-powered biosensor based on ZnO nanowire arrays (ZnO NWs) and flexible PET substrate has been designed and fabricated for real-time monitoring in swimming. Based on the piezoelectric effect of polar ZnO NWs, the fabricated biosensor can work in both air and water without any external power supply. In addition, the biosensor can be easily attached to the surface of the skin to precisely monitor the motion state such as joint moving angle and frequency during swimming. The constant output piezoelectric signal in different relative humidity levels enables actual application in different sports, including swimming. Therefore, the biosensor can be utilized to monitor swimming strokes by attaching it on the surface of the skin. Finally, a wireless transmitting application is demonstrated by implanting the biosensor in vivo to detect angiogenesis. This portable and flexible self-powered biosensor system exhibits broad application prospects in sport monitoring, human-computer interaction and wireless sport big data.

A Self-Powered Portable Flexible Sensor of Monitoring Speed Skating Techniques

With the development of 5G technology, contemporary technologies such as Internet of Things (IoT) and Big Data analyses have been widely applied to the sport industry. This paper focuses on the design of a portable, self-powered, flexible sensor, which does not require an external power supply. The sensor is capable of monitoring speed skating techniques, thereby helping professional athletes to enhance their performance. This sensor mainly consists of Polyvinylidene Fluoride (PVDF) with polarization after a silvering electrode and a flexible polyester substrate. Flexible sensors are attached to the push-off joint part of speed skaters and the ice skate blade. During motion, it produces different piezoelectricity signals depending on the states of motion. The monitoring and analyzing of the real-time sensor signals will adjust the athlete's skating angle, frequency, and push-off techniques, thus improving user training and enhancing performance. Moreover, the production of piezoelectric signals can charge the capacitor, provide power for small electronic equipment (e.g., wireless device), and extend the applications of wearable flexible sensors to the Big Data and IoT technologies in the sport industry.

Recent Advances in Wearable Devices for Non-Invasive Sensing

The development of wearable sensors is aimed at enabling continuous real-time health monitoring, which leads to timely and precise diagnosis anytime and anywhere. Unlike conventional wearable sensors that are somewhat bulky, rigid, and planar, research for next-generation wearable sensors has been focused on establishing fully-wearable systems. To attain such excellent wearability while providing accurate and reliable measurements, fabrication strategies should include (1) proper choices of materials and structural designs, (2) constructing efficient wireless power and data transmission systems, and (3) developing highly-integrated sensing systems. Herein, we discuss recent advances in wearable devices for non-invasive sensing, with focuses on materials design, nano/microfabrication, sensors, wireless technologies, and the integration of those.

Ag Nanowire-Plasmonic-Assisted Charge Separation in Hybrid Heterojunctions of Ppy-PEDOT:PSS/GaN Nanorods for Enhanced UV Photodetection

The surface states, poor carrier life, and other native defects in GaN nanorods (NRs) limit their utilization in high-speed and large-gain ultraviolet (UV) photodetection applications. Making a hybrid structure is one of the finest strategies to overcome such impediments. In this work, a polypyrrole (Ppy)-poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/GaN NRs hybrid structure is introduced for self-powered UV photodetection applications. This hybrid structure yields high photodetection performance, while pristine GaN NRs showed negligible photodetection properties. The ability of the photodetector is further boosted by functionalizing the hybrid structure with Ag nanowires (NWs). The Ag NWs-functionalized hybrid structure exhibited a responsivity of 3.1 × 10³ (A/W), detectivity of 3.19 × 10¹⁴ Jones, and external quantum efficiency of 1.0⁶ × 10⁶ (%) under a UV illumination of λ = 382 nm. This high photoresponse is due to the huge photon absorption rising from the localized surface plasmonic effect of a Ag NWs network. Also, the Ag NWs significantly improved the rising and falling times, which were noted to be 0.20 and 0.21 s, respectively. The model band diagram was proposed with the assistance of X-ray photoelectron spectroscopy to explore the origin of the superior performance of the Ag NWs-decorated Ppy-PEDOT:PSS/GaN NRs photodetector. The proposed hybrid structure seems to be a promising candidate for the development of high-performance UV photodetectors.

Design and Integration of a Layered MoS2/GaN van der Waals Heterostructure for Wide Spectral Detection and Enhanced Photoresponse

Molybdenum disulfide (MoS₂) as a typical two-dimensional (2D) transition-metal dichalcogenide exhibits great potential applications for the next-generation nanoelectronics such as photodetectors. However, most MoS₂-based photodetectors hold obvious disadvantages including a narrow spectral response in the visible region, poor photoresponsivity, and slow response speed. Here, for the first time, we report the design of a two-dimensional MoS₂/GaN van der Waals (vdWs) heterostructure photodetector consisting of few-layer p-type MoS₂ and very thin n-type GaN flakes. Thanks to the good crystal quality of the 2D-GaN flake and the built-in electric field in the interface depletion region of the MoS₂/GaN p-n junction, photogenerated carriers can be rapidly separated and more excitons are collected by electrodes toward the high photoresponsivity of 328 A/W and a fast response time of 400 ms under the illumination of 532 nm light, which is seven times faster than pristine MoS₂ flake. Additionally, the response spectrum of the photodetector is also broadened to the UV region with a high photoresponsivity of 27.1 A/W and a fast response time of 300 ms after integrating with the 2D-GaN flake, exhibiting an advantageous synergetic effect. These excellent performances render MoS₂/GaN vdWs heterostructure photodetectors as promising and competitive candidates for next-generation optoelectronic devices.

A Self-Powered Biosensor for Monitoring Maximal Lactate Steady State in Sport Training

A self-powered biosensor for monitoring the maximal lactate steady state (MLSS) during exercise has been developed for intelligently assisting training system. It has been presented to create poly (vinylidene fluoride) (PVDF)/Tetrapod-shaped ZnO (T-ZnO)/enzyme-modified nanocomposite film through an efficient and cost-effective fabrication process. This sensor can be readily attached to the skin surface of the tester. Due to the piezoelectric surface coupling effect, this biosensor can monitor/sense and analyze physical information in real-time under the non-invasive condition and work independently without any battery. By actively outputting piezoelectric signals, it can quickly and sensitively detect body movements (changes of joint angle, frequency relative humidity during exercise) and physiological information (changes of lactate concentration in sweat). A practical application has been demonstrated by an excellent professional speed skater (male). The purpose of this study is to increase the efficiency of MLSS evaluation, promote the development of piezoelectric surface coupling effect and motion monitoring application, develop an intelligently assisting training system, which has opened up a new direction for human motion monitoring.

Void-free 3D Bioprinting for In-situ Endothelialization and Microfluidic Perfusion

Two major challenges of 3D bioprinting are the retention of structural fidelity and efficient endothelialization for tissue vascularization. We address both of these issues by introducing a versatile 3D bioprinting strategy, in which a templating bioink is deposited layer-by-layer alongside a matrix bioink to establish void-free multimaterial structures. After crosslinking the matrix phase, the templating phase is sacrificed to create a well-defined 3D network of interconnected tubular channels. This void-free 3D printing (VF-3DP) approach circumvents the traditional concerns of structural collapse, deformation and oxygen inhibition, moreover, it can be readily used to print materials that are widely considered "unprintable". By pre-loading endothelial cells into the templating bioink, the inner surface of the channels can be efficiently cellularized with a confluent endothelial layer. This in-situ endothelialization method can be used to produce endothelium with a far greater uniformity than can be achieved using the conventional post-seeding approach. This VF-3DP approach can also be extended beyond tissue fabrication and towards customized hydrogel-based microfluidics and self-supported perfusable hydrogel constructs.

Improved Photoresponse of UV Photodetectors by the Incorporation of Plasmonic Nanoparticles on GaN Through the Resonant Coupling of Localized Surface Plasmon Resonance

Very small metallic nanostructures, i.e., plasmonic nanoparticles (NPs), can demonstrate the localized surface plasmon resonance (LSPR) effect, a characteristic of the strong light absorption, scattering and localized electromagnetic field via the collective oscillation of surface electrons upon on the excitation by the incident photons. The LSPR of plasmonic NPs can significantly improve the photoresponse of the photodetectors. In this work, significantly enhanced photoresponse of UV photodetectors is demonstrated by the incorporation of various plasmonic NPs in the detector architecture. Various size and elemental composition of monometallic Ag and Au NPs, as well as bimetallic alloy AgAu NPs, are fabricated on GaN (0001) by the solid-state dewetting approach. The photoresponse of various NPs are tailored based on the geometric and elemental evolution of NPs, resulting in the highly enhanced photoresponsivity of 112 A W-1, detectivity of 2.4 × 1012 Jones and external quantum efficiency of 3.6 × 104% with the high Ag percentage of AgAu alloy NPs at a low bias of 0.1 V. The AgAu alloy NP detector also demonstrates a fast photoresponse with the relatively short rise and fall time of less than 160 and 630 ms, respectively. The improved photoresponse with the AgAu alloy NPs is correlated with the simultaneous effect of strong plasmon absorption and scattering, increased injection of hot electrons into the GaN conduction band and reduced barrier height at the alloy NPs/GaN interface.

Layer-Dependent Properties of Ultrathin GeS Nanosheets and Application in UV-Vis Photodetectors

Two-dimensional germanium sulfide (GeS), an analogue of phosphorene, has attracted broad attention owing to its excellent environmental stabilities, fascinating electronic and optical properties, and applications in various nanodevices. In spite of the current achievements on 2D GeS, the report of ultrathin few-layer GeS nanosheets within 5 nm is still lacking. Here in this contribution, we have achieved preparation of ultrathin few-layer GeS nanosheets with thicknesses of 1.3 ± 0.1 nm [approximately three layers (∼3L)], 3.2 ± 0.2 nm (∼6L), and 4.2 ± 0.3 nm (∼8L) via a typical liquid-phase exfoliation (LPE) method. Based on various experimental characterizations and first-principles calculations, the layer-dependent electronic, transport, and optical properties are investigated. For the few-layer GeS nanosheets, enhanced light absorption in the UV-vis region and superior photoresponse behavior with increasing layer number is observed, while for the thin films above 10 nm, the properties degenerate to the bulk feature. In addition, the as-prepared ultrathin nanosheets manifest great potential in the applications of photoelectrochemical (PEC)-type photodetectors, exhibiting excellent and stable periodic photoresponse behavior under the radiation of white light. The ∼8L GeS-based photodetector exhibits superior performance than the thinner GeS nanosheets (<4 nm), even better as compared to the bulk or film (above 10 nm) counterparts in terms of higher photoresponsivity along with remarkable photodetection performance in the UV-vis region. This work not only provides direct and solid evidence of the layer-number evolutionary band structure, mobility, and optical properties of ultrathin 2D GeS nanosheets but also promotes the foreseeable applications of 2D GeS as energy-related photoelectric devices.

Resistive Switching Memory Devices Based on Body Fluid of Bombyx mori L

Resistive switching memory devices are strong candidates for next-generation data storage devices. Biological memristors made from renewable natural biomaterials are very promising due to their biocompatibility, biodegradability, and ecological benignity. In this study, a nonvolatile memristor was fabricated using the body fluid of Bombyx mori as the dielectric layer. The developed Al/Bombyx mori body fluid film/indium tin oxide (ITO) biomemristor exhibited bipolar resistive switching characteristics with a maximum on/off current ratio greater than 10⁴. The device showed a retention time of more than 1 × 10⁴ s without any signs of deterioration, thus proving its good stability and reliability. The resistive switching behavior of the Al/Bombyx mori body fluid film/ITO biological memristor is driven by the formation and breakage of conductive filaments formed by the migration of oxygen ions. This study confirms that Bombyx mori body fluid, a 100% natural, inexpensive, and abundant material, is a potential candidate as a nonvolatile biomemristor material with broad application prospects.