Combined Tribological and Bactericidal Effect of Nanodiamonds as a Potential Lubricant for Artificial Joints

Molecular Dynamics Analysis of Surface-Modified Carbon Nanoparticle Reinforced Epoxy Resin

Surface-modified carbon nanoparticles (CNPs) as reinforcement materials have attracted significant attention due to their potential for substantially enhancing mechanical properties. However, the development and application of CNP-enhanced polymeric materials are constrained by an incomplete understanding of their reinforcement mechanisms, impeding sustainable progress. In this study, we employed molecular dynamics simulations to investigate the mechanical properties of surface-modified CNP-reinforced epoxy resin composites at the microscopic scale. The simulations focused on the tensile process and the nanopinning effect of CNPs within the epoxy resin matrix. Our results indicate that surface-modified CNPs form stronger interfacial connections with the epoxy resin, leading to enhanced mechanical strength of the composites. Quantitative analysis revealed that these composites exhibit higher tensile strength compared to nonmodified counterparts, with a significant improvement in stability due to the robust noncovalent interactions between CNPs and the epoxy matrix. This study elucidates the reinforcement mechanisms of surface-modified CNPs in polymers, providing valuable insights for further optimization and sustainable development of CNP-reinforced polymeric materials.

Selective Bacterial Growth Inactivation by pH-Sensitive Sulfanilamide Functionalized Carbon Dots

Carbon dots (CDs) were synthesized hydrothermally by mixing citric acid (CA) and an antifolic agent, sulfanilamide (SNM), employed for pH sensing and bacterial growth inactivation. Sulfanilamide is a prodrug; aromatic hetero cyclization of the amine moiety along with other chemical modifications produces an active pharmacological compound (chloromycetin and miconazole), mostly administered for the treatment of various microbial infections. On the other hand, the efficacy of the sulfanilamide molecule as a drug for antimicrobial activity was very low. We anticipated that the binding of the sulfanilamide molecule on the carbon dot (CD) surface may form antibacterial CDs. Citric acid was hybridized with sulfanilamide during the hydrothermal preparation of the CDs. The molecular fragments of bioactivated sulfanilamide molecule play a crucial role in bacterial growth inactivation for Gram-positive and Gram-negative bacteria. The functional groups of citric acid and sulfanilamide were conserved during the CD formation, facilitating the zwitterionic behavior of CDs associated with its photophysical activity. At low concentrations of CDs, the antibacterial activity was apparent for Gram-positive bacteria only. This Gram-positive bacteria selectivity was also rationalized by zeta potential measurement.

Fullerenes on a Nanodiamond Platform Demonstrate Antibacterial Activity with Low Cytotoxicity

Carbon nanoparticles with antimicrobial properties, such as fullerenes, can be distinguished among the promising means of combating pathogens characterized by resistance to commercial antibiotics. However, they have a number of limitations for their use in medicine. In particular, the insolubility of carbon nanoparticles in water leads to a low biocompatibility and especially strong aggregation when transferred to liquid media. To overcome the negative factors and enhance the action of fullerenes in an extended range of applications, for example, in antimicrobial photodynamic therapy, we created new water-soluble complexes containing, in addition to C60 fullerene, purified detonation nanodiamonds (AC960) and/or polyvinylpyrrolidone (PVP). The in vitro antibacterial activity and toxicity to human cells of the three-component complex C60+AC960+PVP were analyzed in comparison with binary C60+PVP and C60+AC960. All complexes showed a low toxicity to cultured human skin fibroblasts and ECV lines, as well as significant antimicrobial activity, which depend on the type of microorganisms exposed, the chemical composition of the complex, its dosage and exposure time. Complex C60+PVP+AC960 at a concentration of 175 µg/mL showed the most stable and pronounced inhibitory microbicidal/microbiostatic effect.

MoVN-Cu Coatings for In Situ Tribocatalytic Formation of Carbon-Rich Tribofilms in Low-Viscosity Fuels

Inhibiting the tribological failure of mechanical assemblies which rely on fuels for lubrication is an obstacle to maintaining the lifetime of these systems with low-viscosity and low-lubricity fuels. In the present study, a MoVN-Cu nanocomposite coating was tribologically evaluated for durability in high- and low-viscosity fuels as a function of temperature, load, and sliding velocity conditions. The results indicate that the MoVN-Cu coating is effective in decreasing wear and friction relative to an uncoated steel surface. Raman spectroscopy, transmission electron microscopy, and electron-dispersive spectroscopy analysis of the MoVN-Cu worn surfaces confirmed the presence of an amorphous carbon-rich tribofilm which provides easy shearing and low friction during sliding. Further, the characterization of the formed tribofilm revealed the presence of nanoscale copper clusters overlapping with the carbon peak intensities supporting the tribocatalytic origin of the surface protection. The tribological assessment of the MoVN-Cu coating reveals that the coefficient of friction decreased with increasing material wear and initial contact pressure. These findings suggest that MoVN-Cu is a promising protective coating for fuel-lubricated assemblies due to its adaptive ability to replenish lubricious tribofilms from hydrocarbon environments.

Application of Nano-Crystalline Diamond in Tribology

Nano-crystalline diamond has been extensively researched and applied in the fields of tribology, optics, quantum information and biomedicine. In virtue of its hardness, the highest in natural materials, diamond outperforms the other materials in terms of wear resistance. Compared to traditional single-crystalline and poly-crystalline diamonds, nano-crystalline diamond consists of disordered grains and thus possesses good toughness and self-sharpening. These merits render nano-crystalline diamonds to have great potential in tribology. Moreover, the re-nucleation of nano-crystalline diamond during preparation is beneficial to decreasing surface roughness due to its ultrafine grain size. Nano-crystalline diamond coatings can have a friction coefficient as low as single-crystal diamonds. This article briefly introduces the approaches to preparing nano-crystalline diamond materials and summarizes their applications in the field of tribology. Firstly, nano-crystalline diamond powders can be used as additives in both oil- and water-based lubricants to significantly enhance their anti-wear property. Nano-crystalline diamond coatings can also act as self-lubricating films when they are deposited on different substrates, exhibiting excellent performance in friction reduction and wear resistance. In addition, the research works related to the tribological applications of nano-crystalline diamond composites have also been reviewed in this paper.

Outstanding Bio-Tribological Performance Induced by the Synergistic Effect of 2D Diamond Nanosheet Coating and Silk Fibroin

Due to their excellent biocompatibility, outstanding mechanical properties, high strength-to-weight ratio, and good corrosion resistance, titanium (Ti) alloys are extensively used as implant materials in artificial joints. However, Ti alloys suffer from poor wear resistance, resulting in a considerably short lifetime. In this study, we demonstrate that the chemical self-assembly of novel two-dimensional (2D) diamond nanosheet coatings on Ti alloys combined with natural silk fibroin used as a novel lubricating fluid synergistically results in excellent friction and wear performance. Linear-reciprocating sliding tests verify that the coefficient of friction and the wear rate of the diamond nanosheet coating under silk fibroin lubrication are reduced by 54 and 98%, respectively, compared to those of the uncoated Ti alloy under water lubrication. The lubricating mechanism of the newly designed system was revealed by a detailed analysis of the involved microstructural and chemical changes. The outstanding tribological behavior was attributed to the establishment of artificial joint lubrication induced by the cross binding between the diamond nanosheets and silk fibroin. Additionally, excellent biocompatibility of the lubricating system was verified by cell viability, which altogether paves the way for the application of diamond coatings in artificial Ti joint implants.

Bioinspired Hydroxyapatite Coating Infiltrated with a Graphene Oxide Hybrid Supramolecular Hydrogel Orchestrates Antibacterial and Self-Lubricating Performance

Hydroxyapatite (HA) bioceramic coating has been extensively applied for the modification of metallic implants to improve their biocompatibility and service life after implantation. Unfortunately, HA coating often suffers from high friction, severe wear, and bacterial invasion, which restrict its application in artificial joints. According to a bioinspired soft/hard combination strategy, a novel HA composite coating that is infiltrated with a vancomycin-loaded graphene oxide (GO) hybrid supramolecular hydrogel is developed via vacuum infiltration and a subsequent host-guest interaction-induced self-assembly process. The holes of textured HA ceramic coating act just like a "magic pocket", offering a stable container to form and store GO hybrid hydrogels and even to recycle wear debris as well. The drug-loaded hybrid hydrogels stored in textured HA coating possess a unique shear force and/or frictional heat triggered gel-sol transition and sustained drug release behavior, acting like the extrusion of synovial fluid during articular cartilage movement, leading to a remarkable self-lubrication, anti-wear performance, and promising antibacterial property against Staphylococcus aureus. The friction coefficient and wear rate of composite coating reduced by nearly five times and three orders of magnitude compared with textured HA coating, respectively, which benefited from the synergistic lubricate effect of cyclodextrin-based pseudopolyrotaxane supramolecular hydrogel and GO lubricants.

Achieving Ultralow Friction and Wear by Tribocatalysis: Enabled by In-Operando Formation of Nanocarbon Films

Under the high-contact-pressure and shear conditions of tribological interfaces lubricated by gaseous, liquid, and solid forms of carbon precursors, a variety of highly favorable tribocatalytic processes may take place and result in the in situ formation of nanocarbon-based tribofilms providing ultralow friction and wear even under extreme test conditions. Structurally, these tribofilms are rather complex and may consist of all known forms of nanocarbon including amorphous or disordered carbon, graphite, graphene, nano-onion, nanotube, etc. Tribologically, they shear readily to provide ultralow friction and protection against wear. In this paper, we review some of the latest developments in catalyst-enabled tribochemical films resulting from gaseous, liquid, and solid sources of carbon. Particular focus is given to the nature and lubrication mechanisms of such in situ derived tribofilms with the hope that future tribological surfaces can be designed in such a way to exploit the beneficial impact of catalysis in friction and wear control.

Supramolecular hydrogel-infiltrated ceramics composite coating with combined antibacterial and self-lubricating performance

Inspired by the structure and dynamic weeping lubricating mechanism of articular cartilage, a novel composite coating composed of a textured Y₂O₃-stabilized ZrO₂ (YSZ) ceramics reservoir and silver nanoparticles (AgNPs) hybrid supramolecular hydrogel was developed on the basis of a soft/hard combination strategy. The precursor solution including the poly(ethylene glycol) (PEG)-modified AgNPs and α-cyclodextrins (α-CDs) could be infiltrated deep into (50-60 μm) the pores of a textured YSZ ceramics substrate by a vacuum infiltration method, in situ forming a supramolecular hydrogel within the pores through host-guest inclusion between α-CDs and PEG chains distributed onto the surface of AgNPs. The AgNPs hybrid hydrogel showed thixotropic and thermoresponsive gel-sol transition behavior, low cytotoxicity, and excellent drug-loading capacity, as well as significant antibacterial properties. The textured YSZ ceramics not only provided a hard supporting skeleton and stable reservoir to protect the supramolecular hydrogel from destruction under load-bearing or shear condition, but also allowed retaining the stimuli-responsive gel-sol transition property and drug-release capability of the infiltrated hydrogel, endowing the composite coating with excellent antibacterial properties, and self-lubrication and wear-resistance performance. The composite coating in this work brings a new insight into the design of antibacterial and self-lubricating ceramic coatings for artificial joint applications.

Tribocatalytically-activated formation of protective friction and wear reducing carbon coatings from alkane environment

Minimizing the wear of the surfaces exposed to mechanical shear stresses is a critical challenge for maximizing the lifespan of rotary mechanical parts. In this study, we have discovered the anti-wear capability of a series of metal nitride-copper nanocomposite coatings tested in a liquid hydrocarbon environment. The results indicate substantial reduction of the wear in comparison to the uncoated steel substrate. Analysis of the wear tracks indicates the formation of carbon-based protective films directly at the sliding interface during the tribological tests. Raman spectroscopy mapping of the wear track suggests the amorphous carbon (a-C) nature of the formed tribofilm. Further analysis of the tribocatalytic activity of the best coating candidate, MoN-Cu, as a function of load (0.25–1 N) and temperature (25 °C and 50 °C) was performed in three alkane solutions, decane, dodecane, and hexadecane. Results indicated that elevated temperature and high contact pressure lead to different tribological characteristics of the coating tested in different environments. The elemental energy dispersive x-ray spectroscopy analysis and Raman analysis revealed formation of the amorphous carbon film that facilitates easy shearing at the contact interface thus enabling more stable friction behavior and lower wear of the tribocatalytic coating. These findings provide new insights into the tribocatalysis mechanism that enables the formation of zero-wear coatings.

Interfacial Contributions in Nanodiamond-Reinforced Polymeric Fibers

We study the interfacial energy parameters that explain the reinforcement of polymers with nanodiamond (ND) and the development of mechanical strength of electrospun ND-reinforced composites. Thermodynamic parameters such as the wettability ratio, work of spreading and dispersion/aggregation transition are used to derive a criterion to predict the dispersibility of carboxylated ND (cND) in polymeric matrices. Such a criterion for dispersion (D_c) is applied to electrospun cND-containing poly(vinyl alcohol) (PVA), polyacrylonitrile (PAN), and polystyrene (PS) fiber composites. The shifts in glass transition temperature (ΔT_g), used as a measure of polymer/cND interfacial interactions and hence the reinforcement capability of cNDs, reveal a direct correlation with the thermodynamic parameter D_c in the order of PAN < PS < PVA. Contrary to expectation, however, the tensile strength of the electrospun fibers correlates with the D_c and ΔT_g only for semicrystalline polymers (PAN < PVA) while the amorphous PS displays a maximum reinforcement with cND. Such conflicting results reveal a synergy that is not captured by thermodynamic considerations alone but also factor in the contributions of polymer/cND interface stress transfer efficiency. Our findings open the possibility for tailoring the interfacial interactions in polymer-ND fiber composites to achieve maximum mechanical reinforcement.

Controlled bacteriostasis of tea polyphenol loaded ultrahigh molecular weight polyethylene with high crosslink density and oxidation resistance for total joint replacement

To avoid catastrophic bacterial infection in prosthesis failure, ultrahigh molecular weight polyethylene (UHMWPE), a common bearing material of artificial joints, has been formulated with antibiotics to eliminate bacteria locally at the implant site. However, the pressing issues regarding cytotoxic effects and evolution of drug resistant bacteria necessitates the development of bio-friendly bacteriostat with long bacteriostatic efficacy. Herein, tea polyphenol extracted from nature source was introduced in UHMWPE as a biogenic antimicrobial. Controlled antimicrobial activity was achieved by chemical crosslinking to regulate the release of the tea polyphenol. In addition, the crosslinking efficiency of UHMWPE blends with high loaded tea polyphenol was significantly improved in comparison to radiation crosslinking. The immobilized tea polyphenols also enhanced the oxidation stability of the UHMWPE, which is essential to prolong the service life in vivo and the storage time in vitro. The blends presented good biocompatibility, despite cell repellent on the highly crosslinked surface. Chemically crosslinked tea polyphenol/UHMWPE exhibited feasible properties for total joint implants, which is promising for clinical application.

Microscopic insight into nanodiamond polymer composites: reinforcement, structural, and interaction properties

Nanodiamond (ND)-reinforced polymer composites attract a great deal of attention; however, insufficient understanding of their reinforced behavior is greatly limiting their further design and application. In this paper, a microscopic investigation of the stretched processes of aminated ND and resin composites is undertaken to elucidate the reinforcement mechanism of ND in the polymer matrix by employing molecular dynamics and semi-empirical quantum chemistry simulations. The stretching process and reinforcement behavior are observed on the nanoscale, and the nano-pinning effect of ND on the resin matrix is clarified. Further analyses indicate that due to the increase of system volume, the interactions between the ND and resin molecules increase with stretching; this facilitates the combination of ND and resin molecules and thus recovers the breakage of the resin matrix. This recovery process is regarded as the origin of the ND reinforcement of the polymer. The strong interaction between the ND and resin molecules is quantitatively assessed by the interpenetration of the van der Waals surface and the reduced density gradient analysis of electrons using quantum chemistry calculations. The high stability of their noncovalent combination is also revealed. This investigation provides an excellent approach for revealing the origin of ND reinforcement behavior and thus facilitates further optimization of the performance of the ND-polymer composites.

Influence of crystallization temperature on fluorescence of n-diamond quantum dots

Nanodiamonds are popular biological labels because of their superior mechanical and optical properties. Their surfaces bridging the core and surrounding medium play a key role in determining their bio-linkage and photophysical properties. n-diamond is a mysterious carbon allotrope whose crystal structure remains debated. We study the influence of the crystallization temperature on the fluorescence properties of the colloidal n-diamond quantum dots (n-DQDs) with sizes of several nanometers. They exhibit multiband fluorescence across the whole visible region which depends sensitively on the crystallization temperature. Their surfaces turn from hydrophobic ones rich of sp²-bonded carbon into hydrophilic ones rich of carboxyl derivatives and hydroxyl groups as the crystallization temperature increases. The different surface states correlated with the surface structures account for the distinct fluorescence properties of the n-DQDs crystallized at different temperatures. These high-purity ultrasmall n-DQDs with tunable surface chemistry and fluorescence properties are promising multicolor biomarkers and lighting sources.

Nanodiamonds for bioapplications, recent developments

The world of biomedical research is in constant evolution, requiring more and more conditions and norms through pre-clinic and clinic studies. Nanodiamonds (NDs) with exceptional optical, thermal and mechanical properties emerged on the global scientific scene and recently gained more attention in biomedicine and bioanalysis fields. Many problematics have been deliberated to better understand their in vitro and in vivo efficiency and compatibility. Light was shed on their synthesis, modification and purification steps, as well as particle size and surface properties in order to find the most suitable operating conditions. In this review, we present the latest advances of NDs use in bioapplications. A large variety of subjects including anticancer and antimicrobial systems, wound healing and tissue engineering management tools, but also bioimaging and labeling probes are tackled. The key information resulting from these recent works were evidenced to make an overview of the potential features of NDs, with a special look on emerging therapeutic and diagnosis combinations.

Injectable Hydrogels as Three-Dimensional Network Reservoirs for Osteoporosis Treatment

Despite tremendous progresses made in the field of tissue engineering over the past several decades, it remains a significant challenge for the treatment of osteoporosis (OP) due to the lack of appropriate carriers to improve the bioavailability of therapeutic agents and the unavailability of artificial bone matrix with desired properties for the replacement of damaged bone regions. Encouragingly, the development of injectable hydrogels for the treatment of OP has attracted increasing attention in recent years because they can serve either as a reservoir for various therapeutic species or as a perfect filler for bone injuries with irregular shapes. However, the relationship between the complicated pathological mechanism of OP and the properties of diverse polymeric materials lacks elucidation, which clearly hampers the clinical application of injectable hydrogels for the efficient treatment of OP. To clarify this relationship, this article summarized both localized and systematic treatment of OP using an injectable hydrogel-based strategy. Specifically, the pathogenesis of OP and the limitations of current treatment approaches were first analyzed. We further focused on the use of hydrogels loaded with various therapeutic substances following a classification standard of the encapsulated cargoes for OP treatment with an emphasis on the application and precautions of each category. A concluding remark on existing challenges and future directions of this rapidly developing research area was finally made. Impact statement Effective osteoporosis (OP) treatment remains a significant challenge due substantially to the unavailability of appropriate drug carriers and artificial matrices with desired properties to promote bone repair and replace damaged regions. For this purpose, this review focused on the development of diverse injectable hydrogel systems for the delivery of various therapeutic agents, including drugs, stem cells, and nucleic acids, for effective increase in bone mass and favorable osteogenesis. The summarized important guidelines are believed to promote clinical development and translation of hydrogels for the efficient treatment of OP and OP-related bone damages toward improved life quality of millions of patients.

Changes in tribological and antibacterial properties of poly(methyl methacrylate)-based 3D-printed intra-oral appliances by incorporating nanodiamonds

It is essential for 3D-printed intra-oral appliances to be able to withstand the mechanical and microbial insult existent in the harsh environment of the oral cavity. Poly(methyl methacrylate) (PMMA)-based appliances are widely used in dentistry. Hence, the present study aimed to evaluate the role of nanodiamonds (NDs) as fillers to enhance the resistance to friction and wear. Using a solution-based mixing technique, 0.1 wt% ND was incorporated into the PMMA, and specimens were 3D-printed for tribological and bacterial analysis. The control specimens without ND fillers were tested against specimens with both amine-functionalized NDs (A-ND) and pure non-functionalized NDs (ND). The surface hardness test revealed a statistically significant increase in the Vickers micro-hardness (p < 0.001) in the nanocomposite groups. There was a significant reduction in the coefficient of friction (COF) (p < 0.01) in both the ND and A-ND nanocomposites compared to the stainless steel (SS) counter surfaces. However, for titanium (Ti)-based specimens, the COF of the control group was similar to that of A-ND but lower than that of ND. The wear resistance evaluation revealed that both the ND and A-ND groups displayed enhanced resistance to surface loss in comparison to the controls for both SS and Ti counter-surfaces (p < 0.001). Furthermore, both A-ND and ND exhibited significantly enhanced resistance to the formation of Streptococcus mutans biofilms after 48 h (p < 0.01) compared to the control group. Hence, we concluded that the addition of 0.1 wt% ND in the PMMA-based resin for 3D printing resulted in significant improvement in properties such as COF, wear resistance, and resistance to S. mutans, without any notable impact associated with the functionalization of the NDs.

pH-dependent nanodiamonds enhance the mechanical properties of 3D-printed hyaluronic acid nanocomposite hydrogels

Nanocomposite hydrogels capable of undergoing manufacturing process have recently attracted attention in biomedical applications due to their desired mechanical properties and high functionality. 3D printing nanocomposite hydrogels of hyaluronic acid (HA)/nanodiamond (ND) revealed that the addition of ND with the low weight ratio of 0.02 wt% resulted in higher compressive force and gel breaking point, compared with HA only nanocomposites. These HA nanocomposite hydrogels loaded with surface functionalized ND allowed for the enforced compressive stress to be tuned in a pH-dependent manner. HA nanocomposite hydrogels with ND-OH at pH 8 showed an increase of 1.40-fold (0.02%: 236.18 kPa) and 1.37-fold (0.04%: 616.72 kPa) the compressive stress at the composition of 0.02 wt% and 0.04 wt, respectively, compared to those of ND-COOH (0.02%: 168.31 kPa, 0.04%: 449.59 kPa) at the same pH. Moreover, the compressive stress of HA/ND-OH (0.04 wt%) at pH 8 was mechanically enhanced 1.29-fold, compared to that of HA/ND-OH (0.04 wt%) at pH 7. These results indicate that the tunable buffering environment and interaction with the long chains of HA at the molecular level have a critical role in the dependency of the mechanical properties on pH. Due to the pH stability of the ND-OH nanophase, filament-based processing and layer-based deposition at microscale attained enforced mechanical properties of hydrogel. Fine surface tuning of the inorganic ND nanophase and controlled 3D printing leads to improved control over the pH-dependent mechanical properties of the nanocomposite hydrogels reported herein.