1
|
Guo T, Wan Z, Panahi-Sarmad M, Banvillet G, Lu Y, Zargar S, Tian J, Jiang F, Mao Y, Tu Q, Rojas OJ. Chitin Nanofibers Enable the Colloidal Dispersion of Carbon Nanomaterials in Aqueous Phase and Hybrid Material Coassembly. ACS NANO 2024; 18:14954-14967. [PMID: 38820368 DOI: 10.1021/acsnano.4c00549] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2024]
Abstract
Chitin nanofibrils (ChNF) sourced from discarded marine biomass are shown as effective stabilizers of carbon nanomaterials in aqueous media. Such stabilization is evaluated for carbon nanotubes (CNT) considering spatial and temporal perspectives by using experimental (small-angle X-ray scattering, among others) and theoretical (atomistic simulation) approaches. We reveal that the coassembly of ChNF and CNT is governed by hydrophobic interactions, while electrostatic repulsion drives the colloidal stabilization of the hybrid ChNF/CNT system. Related effects are found to be transferable to multiwalled carbon nanotubes and graphene nanosheets. The observations explain the functionality of hybrid membranes obtained by aqueous phase processing, which benefit from an excellent areal mass distribution (correlated to piezoresistivity), also contributing to high electromechanical performance. The water resistance and flexibility of the ChNF/CNT membranes (along with its tensile strength at break of 190 MPa, conductivity of up to 426 S/cm, and piezoresistivity and light absorption properties) are conveniently combined in a device demonstration, a sunlight water evaporator. The latter is shown to present a high evaporation rate (as high as 1.425 kg water m-2 h-1 under one sun illumination) and recyclability.
Collapse
Affiliation(s)
- Tianyu Guo
- Bioproducts Institute, Department of Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, British Columbia V6T 1Z3, Canada
| | - Zhangmin Wan
- Bioproducts Institute, Department of Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, British Columbia V6T 1Z3, Canada
| | - Mahyar Panahi-Sarmad
- Bioproducts Institute, Department of Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, British Columbia V6T 1Z3, Canada
- Sustainable Functional Biomaterials Laboratory, Department of Wood Science, The University of British Columbia, Vancouver, British Columbia V6T 1Z4, Canada
| | - Gabriel Banvillet
- Bioproducts Institute, Department of Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, British Columbia V6T 1Z3, Canada
| | - Yi Lu
- Bioproducts Institute, Department of Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, British Columbia V6T 1Z3, Canada
| | - Shiva Zargar
- Sustainable Bioeconomy Research Group, Department of Wood Science, The University of British Columbia, 2424 Main Mall, Vancouver, British Columbia V6T 1 Z4, Canada
| | - Jing Tian
- Bioproducts Institute, Department of Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, British Columbia V6T 1Z3, Canada
| | - Feng Jiang
- Sustainable Functional Biomaterials Laboratory, Department of Wood Science, The University of British Columbia, Vancouver, British Columbia V6T 1Z4, Canada
| | - Yimin Mao
- Department of Materials Science and Engineering, University of Maryland, College Park, Maryland 20742, United States
- NIST Center for Neutron Research, National Institute of Standards and Technology, Gaithersburg, Maryland 20899, United States
| | - Qingshi Tu
- Sustainable Bioeconomy Research Group, Department of Wood Science, The University of British Columbia, 2424 Main Mall, Vancouver, British Columbia V6T 1 Z4, Canada
| | - Orlando J Rojas
- Bioproducts Institute, Department of Chemical and Biological Engineering, University of British Columbia, 2360 East Mall, Vancouver, British Columbia V6T 1Z3, Canada
- Department of Chemistry, The University of British Columbia, 2036 Main Mall, Vancouver, British Columbia V6T 1Z1, Canada
- Department of Wood Science, The University of British Columbia, 2900-2424 Main Mall, Vancouver, British Columbia V6T 1Z4, Canada
| |
Collapse
|
2
|
Zhang Z, Mao H, Kong Y, Niu P, Zheng J, Liu P, Wang WJ, Li Y, Yang X. Re-Designing Cellulosic Core-Shell Composite Fibers for Advanced Photothermal and Thermal-Regulating Performance. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2305924. [PMID: 37990391 DOI: 10.1002/smll.202305924] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/14/2023] [Revised: 10/12/2023] [Indexed: 11/23/2023]
Abstract
Flexible fibers and textiles featuring photothermal conversion and storage capacities are ideal platforms for solar-energy utilization and wearable thermal management. Other than using fossil-fuel-based synthetic fibers, re-designing natural fibers with nanotechnology is a sustainable but challenging option. Herein, advanced core-shell structure fibers based on plant-based nanocelluloses are obtained using a facile co-axial wet-spinning process, which has superior photothermal and thermal-regulating performances. Besides serving as the continuous matrix, nanocelluloses also have two other important roles: dispersing agent when exfoliating molybdenum disulfide (MoS2), and stabilizer for phase change materials (PCM) in the form of Pickering emulsion. Consequently, the shell layer contains well-oriented nanocelluloses and MoS2, and the core layer contains a high content of PCM in a leak-proof encapsulated manner. Such a hierarchical cellulosic supportive structure leads to high mechanical strength (139 MPa), favorable flexibility, and large latent heat (92.0 J g-1), surpassing most previous studies. Furthermore, the corresponding woven cloth demonstrates satisfactory thermal-regulating performance, high solar-thermal conversion and storage efficiency (78.4-84.3%), and excellent long-term performance. In all, this work paves a new way to build advanced structures by assembling nanoparticles and polymers for functional composite fibers in advanced solar-energy-related applications.
Collapse
Affiliation(s)
- Zihuan Zhang
- Key Laboratory of Biomass Chemical Engineering of Ministry of Education, State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, P. R. China
| | - Hui Mao
- Key Laboratory of Biomass Chemical Engineering of Ministry of Education, State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, P. R. China
| | - Yuying Kong
- Key Laboratory of Biomass Chemical Engineering of Ministry of Education, State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, P. R. China
| | - Panpan Niu
- Key Laboratory of Biomass Chemical Engineering of Ministry of Education, State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, P. R. China
- Institute of Zhejiang University, Quzhou, 324000, P. R. China
| | - Jieyuan Zheng
- Institute of Zhejiang University, Quzhou, 324000, P. R. China
| | - Pingwei Liu
- Key Laboratory of Biomass Chemical Engineering of Ministry of Education, State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, P. R. China
- Institute of Zhejiang University, Quzhou, 324000, P. R. China
| | - Wen-Jun Wang
- Key Laboratory of Biomass Chemical Engineering of Ministry of Education, State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, P. R. China
- Institute of Zhejiang University, Quzhou, 324000, P. R. China
| | - Yuanyuan Li
- Wallenberg Wood Science Center, Department of Fiber and Polymer Technology, KTH Royal Institute of Technology, Stockholm, SE-10044, Sweden
| | - Xuan Yang
- Key Laboratory of Biomass Chemical Engineering of Ministry of Education, State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, P. R. China
- Institute of Zhejiang University, Quzhou, 324000, P. R. China
| |
Collapse
|
3
|
Jeong YH, Kwon M, Shin S, Lee J, Kim KS. Biomedical Applications of CNT-Based Fibers. BIOSENSORS 2024; 14:137. [PMID: 38534244 DOI: 10.3390/bios14030137] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/13/2024] [Revised: 02/29/2024] [Accepted: 03/02/2024] [Indexed: 03/28/2024]
Abstract
Carbon nanotubes (CNTs) have been regarded as emerging materials in various applications. However, the range of biomedical applications is limited due to the aggregation and potential toxicity of powder-type CNTs. To overcome these issues, techniques to assemble them into various macroscopic structures, such as one-dimensional fibers, two-dimensional films, and three-dimensional aerogels, have been developed. Among them, carbon nanotube fiber (CNTF) is a one-dimensional aggregate of CNTs, which can be used to solve the potential toxicity problem of individual CNTs. Furthermore, since it has unique properties due to the one-dimensional nature of CNTs, CNTF has beneficial potential for biomedical applications. This review summarizes the biomedical applications using CNTF, such as the detection of biomolecules or signals for biosensors, strain sensors for wearable healthcare devices, and tissue engineering for regenerating human tissues. In addition, by considering the challenges and perspectives of CNTF for biomedical applications, the feasibility of CNTF in biomedical applications is discussed.
Collapse
Affiliation(s)
- Yun Ho Jeong
- School of Chemical Engineering, Pusan National University, Busan 46241, Republic of Korea
| | - Mina Kwon
- School of Chemical Engineering, Pusan National University, Busan 46241, Republic of Korea
| | - Sangsoo Shin
- School of Chemical Engineering, Pusan National University, Busan 46241, Republic of Korea
| | - Jaegeun Lee
- School of Chemical Engineering, Pusan National University, Busan 46241, Republic of Korea
- Department of Organic Material Science and Engineering, Pusan National University, Busan 46241, Republic of Korea
| | - Ki Su Kim
- School of Chemical Engineering, Pusan National University, Busan 46241, Republic of Korea
- Department of Organic Material Science and Engineering, Pusan National University, Busan 46241, Republic of Korea
- Institute of Advanced Organic Materials, Pusan National University, Busan 46241, Republic of Korea
| |
Collapse
|
4
|
Yang J, Cao Z, Chen Y, Liu X, Xiang Y, Yuan Y, Xin C, Xia Y, Huang S, Qiang Z, Fu KK, Zhang J. Dry-Processable Polymer Electrolytes for Solid Manufactured Batteries. ACS NANO 2023; 17:19903-19913. [PMID: 37801700 DOI: 10.1021/acsnano.3c04610] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/08/2023]
Abstract
Designing a solid-state electrolyte that satisfies the operating requirements of solid-state batteries is key to solid-state battery applications. The consensus is that solid-state electrolytes need to allow fast ion transport, while providing better interfacial compatibility and mechanical tolerance. Herein, a simple but effective strategy is proposed, combining hard and soft component polymer systems, to exploit a solid polymer electrolyte (SPE) with a 3D network via an in situ graft polymerization. The 3D structure is constructed by a hard cellulose nanocrystal (CNC) as the skeleton and a soft polyacrylonitrile (PAN) as the filler through a dry-processing method. The reported systems have several advantages, including ease of processing, only requiring using an exceedingly small amount of solvent, light weight (ρ = 1.2 g cm-3), excellent mechanical stability (tensile strength of 9.5 MPa), and high ionic conductivity (3.9 × 10-4 S cm-1, 18 °C) and migration number (tLi+ = 0.8). In particular, the high conductivity is enabled: the efficient Li+ transportation path constructed between CNC-PAN powders and abundant sulfonate radicals and hydroxyl groups on the CNC surface acts as the bridge of Li+ transition. When the CNCs are grafted onto the PAN polymer, the dipole-dipole interaction between the nitrile groups of the PAN and the hydroxyl groups of the CNCs can help to improve the mechanical stability and ionic conductivity of the SPE. Moreover, a tightly formed interface between SPE and LiFePO4 (LFP)/carbon black/SPE cathode can be achieved in an assembled solid-state battery by hot pressing, thus further enhancing the battery's performance.
Collapse
Affiliation(s)
- Jiying Yang
- Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, People's Republic of China
| | - Zhang Cao
- Department of Mechanical Engineering, Center for Composite Materials, University of Delaware, Newark, Delaware 19716, United States
| | - Yuwei Chen
- Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, People's Republic of China
| | - Xueqing Liu
- Key Laboratory of Optoelectronic Chemical Materials and Devices, Ministry of Education and Flexible Display Materials and Technology Co-innovation Centre of Hubei Province, Jianghan University, Wuhan 430056, People's Republic of China
| | - Yizhi Xiang
- Dave C. Swalm School of Chemical Engineering, Mississippi State University, Starkville, Mississippi 39762, United States
| | - Yuan Yuan
- Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, People's Republic of China
| | - Cui Xin
- Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, People's Republic of China
| | - Yumin Xia
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201600, People's Republic of China
| | - Shuohan Huang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201600, People's Republic of China
| | - Zhe Qiang
- School of Polymer Science and Engineering, The University of Southern Mississippi, Hattiesburg, Mississippi 39406, United States
| | - Kun Kelvin Fu
- Department of Mechanical Engineering, Center for Composite Materials, University of Delaware, Newark, Delaware 19716, United States
| | - Jianming Zhang
- Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, People's Republic of China
| |
Collapse
|
5
|
Wise HG, Takana H, Dichiara AB. Dynamic Assembly of Strong and Conductive Carbon Nanotube/Nanocellulose Composite Filaments and Their Application in Resistive Liquid Sensing. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 37437162 DOI: 10.1021/acsami.3c03906] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/14/2023]
Abstract
The continuous flow assembly of colloidal nanoparticles from aqueous suspensions into macroscopic materials in a field-assisted double flow focusing system offers an attractive way to bridge the outstanding nanoscale characteristics of renewable cellulose nanofibrils (CNFs) at scales most common to human technologies. By incorporating single-walled carbon nanotubes (SWNTs) during the fabrication process, high-performance functional filament nanocomposites were produced. CNFs and SWNTs were first dispersed in water without any external surfactants or binding agents, and the resulting nanocolloids were aligned by means of an alternating electric field combined with extensional sheath flows. The nanoscale orientational anisotropy was then locked by a liquid-gel transition during the materials assembly into macroscopic filaments, which greatly improved their mechanical, electrical, and liquid sensing properties. Significantly, these findings pave the way toward the environmentally friendly and scalable manufacturing of a variety of multifunctional fibers for diverse applications.
Collapse
Affiliation(s)
- Heather G Wise
- School of Environmental & Forest Sciences, University of Washington, Seattle, Washington 98195, United States
| | - Hidemasa Takana
- Institute of Fluid Science, Tohoku University, Sendai 980-8577, Japan
| | - Anthony B Dichiara
- School of Environmental & Forest Sciences, University of Washington, Seattle, Washington 98195, United States
| |
Collapse
|
6
|
Mao H, Niu P, Zhang Z, Kong Y, Wang WJ, Yang X. High-strength and functional nanocellulose filaments made by direct wet spinning from low concentration suspensions. Carbohydr Polym 2023; 313:120881. [PMID: 37182934 DOI: 10.1016/j.carbpol.2023.120881] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/23/2022] [Revised: 03/13/2023] [Accepted: 03/30/2023] [Indexed: 04/08/2023]
Abstract
Continuous filaments obtained through the wet spinning of nanocellulose have promising mechanical properties with sustainable features. To guarantee proper spinnability for wet spinning, freshly made cellulose nanofibril (CNF) suspension needs to be concentrated to have a concentration above 1 wt%, resulting in energy- and time-consuming, and inferior mechanical properties of the final filaments owing to decreasing the CNF alignment against shear flows. In this study, a CNF spinning suspension at a low concentration (0.4 wt%) can be used right after the fibrillation process without further treatments. The effects of the concentration and re-concentrating process are studied by carefully characterizing the rheological behavior and filament solidification processes, which provides more fundamental understandings on the spinnability and CNF network formation of such colloidal CNF suspensions. Combined with a post stretching process, the final dried CNF filaments have superior mechanical properties with Young's modulus and tensile strength of 35 GPa and 567 MPa, surpassing most literature data. Moreover, different functional particles can be easily incorporated to prepare functional filaments. With facile preparation and superior properties, these CNF filaments may be suitable for advanced composite filler and special textile applications.
Collapse
|
7
|
Wang B, Qiu S, Chen Z, Hu Y, Shi G, Zhuo H, Zhang H, Zhong L. Assembling nanocelluloses into fibrous materials and their emerging applications. Carbohydr Polym 2023; 299:120008. [PMID: 36876760 DOI: 10.1016/j.carbpol.2022.120008] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/06/2022] [Revised: 08/07/2022] [Accepted: 08/16/2022] [Indexed: 11/29/2022]
Abstract
Nanocelluloses, derived from various plants or specific bacteria, represent the renewable and sophisticated nano building blocks for emerging functional materials. Especially, the assembly of nanocelluloses as fibrous materials can mimic the structural organization of their natural counterparts to integrate various functions, thus holding great promise for potential applications in various fields, such as electrical device, fire retardance, sensing, medical antibiosis, and drug release. Due to the advantages of nanocelluloses, a variety of fibrous materials have been fabricated with the assistance of advanced techniques, and their applications have attracted great interest in the past decade. This review begins with an overview of nanocellulose properties followed by the historical development of assembling processes. There will be a focus on assembling techniques, including traditional methods (wet spinning, dry spinning, and electrostatic spinning) and advanced methods (self-assembly, microfluidic, and 3D printing). In particular, the design rules and various influencing factors of assembling processes related to the structure and function of fibrous materials are introduced and discussed in detail. Then, the emerging applications of these nanocellulose-based fibrous materials are highlighted. Finally, some perspectives, key opportunities, and critical challenges on future research trends within this field are proposed.
Collapse
Affiliation(s)
- Bing Wang
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China
| | - Shuting Qiu
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China
| | - Zehong Chen
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China
| | - Yijie Hu
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China
| | - Ge Shi
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China
| | - Hao Zhuo
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China
| | - Huili Zhang
- Department of Neurology, Guangzhou First People's Hospital, School of Medicine, South China University of Technology, Guangzhou 510180, China.
| | - Linxin Zhong
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510641, China.
| |
Collapse
|
8
|
Mansoorianfar M, Nabipour H, Pahlevani F, Zhao Y, Hussain Z, Hojjati-Najafabadi A, Hoang HY, Pei R. Recent progress on adsorption of cadmium ions from water systems using metal-organic frameworks (MOFs) as an efficient class of porous materials. ENVIRONMENTAL RESEARCH 2022; 214:114113. [PMID: 36030914 DOI: 10.1016/j.envres.2022.114113] [Citation(s) in RCA: 29] [Impact Index Per Article: 14.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/12/2022] [Revised: 08/06/2022] [Accepted: 08/12/2022] [Indexed: 06/15/2023]
Abstract
Various articles have been written about MOFs, which are organic-inorganic polymer structures that are unique in three-dimensional porosity, crystalline structure, and their ability to adsorb cadmium ion pollutants from aqueous solutions. These materials possess active metal sites, highly porous structures, high specific surfaces, high chemical functionality, and porous topologies. It is necessary to study adsorption kinetics, isotherms, and mechanisms in order to better understand the adsorption process. Adsorption kinetics can provide information about the adsorption rate and reaction pathway of adsorbents. Adsorption isotherms analyze the possibility of absorbances based on the Gibbs equation and thermodynamic theories. Moreover, in practical applications, knowledge of the adsorption mechanism is essential for predicting adsorption reactions and designing MOFs structures. In this review, the latest suggested adsorption mechanisms, kinetics, and isotherms of MOFs-based materials for removing cadmium ions are presented. A comparison is then conducted between different MOFs and the mechanisms of cadmium ion removal. We also discuss the future role of MOFs in removing environmental contaminants. Lastly, we discuss the gap in research and limitations of MOFs as adsorbents in actual applications, and probable technology development for the development of cost-efficient and sustainable MOFs for metal ion removal.
Collapse
Affiliation(s)
- Mojtaba Mansoorianfar
- CAS Key Laboratory for Nano-Bio Interface, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China.
| | - Hafezeh Nabipour
- State Key Laboratory of Fire Science, University of Science and Technology of China, 96 Jinzhai Road, Hefei, Anhui, 230026, China
| | - Farshid Pahlevani
- Centre for Sustainable Materials Research and Technology SMaRT@UNSW, School of Materials Science and Engineering, University of New South Wales (UNSW), Australia
| | - Yuewu Zhao
- CAS Key Laboratory for Nano-Bio Interface, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| | - Zahid Hussain
- CAS Key Laboratory for Nano-Bio Interface, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| | - Akbar Hojjati-Najafabadi
- College of Rare Earths, Jiangxi University of Science and Technology, No. 86, Hongqi Ave., Ganzhou, Jiangxi, 341000, China; Faculty of Materials, Metallurgy and Chemistry, School of Materials Science and Engineering, Jiangxi University of Science and Technology, Ganzhou, 341000, PR China
| | - Hien Y Hoang
- Center for Advanced Chemistry, Institute of Research and Development, Duy Tan University, 03 Quang Trung, Da Nang, Viet Nam; Faculty of Natural Sciences, Duy Tan University, 03 Quang Trung, Da Nang, Viet Nam.
| | - Renjun Pei
- CAS Key Laboratory for Nano-Bio Interface, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China.
| |
Collapse
|
9
|
Ren N, Chen S, Cui M, Huang R, Qi W, He Z, Su R. Ultrastrong and flame-retardant microfibers via microfluidic wet spinning of phosphorylated cellulose nanofibrils. Carbohydr Polym 2022; 296:119945. [DOI: 10.1016/j.carbpol.2022.119945] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/18/2022] [Revised: 07/27/2022] [Accepted: 07/30/2022] [Indexed: 11/02/2022]
|
10
|
Li X, Liu Y, Gao M, Cai K. Construction of hierarchical polypyrrole coated copper-catecholate grown on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) fibers for high-performance supercapacitors. J Colloid Interface Sci 2022; 627:142-150. [PMID: 35842964 DOI: 10.1016/j.jcis.2022.07.050] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/09/2022] [Revised: 07/07/2022] [Accepted: 07/09/2022] [Indexed: 10/17/2022]
Abstract
Fiber-shaped supercapacitors (FSCs) are considered as the optimal candidate for wearable energy devices, due to their high safety, excellent electrochemical stability, workability and body adaptability. However, the specific capacitances of today's FSCs such as carbon nanotube fibers and graphene fibers, are still not high enough for practical applications due to the limitation of their energy storage mode. So, we design a ternary composite fiber-shaped electrode: First, a kind of metal organic framework (MOF), copper-catecholate (Cu-CAT) nanorods, are in-situ grown on a wet-spun poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) fiber at the ambient temperature. Second, polypyrrole (PPy) is electrodeposited on the surface of the Cu-CAT/PEDOT:PSS fiber to obtain PPy@Cu-CAT@PEDOT:PSS fiber (PPy@Cu-CAT@PF). The growing Cu-CAT with high porosity anchored on the fiber surface provides electrochemical activate sites and the encapsulation of PPy effectively provides a continuous charge transfer path and improve its cycling stability. Notably, the PPy@Cu-CAT@PF electrode exhibits a satisfactory areal capacitance of 669.93 mF cm-2 at 2 mA cm-2, which remains 61.66% even at a high current density of 20 mA cm-2. Furthermore, the assembled symmetric FSC displays excellent electrochemical properties and outstanding mechanical flexibility, demonstrating its feasibility as a wearable supercapacitor.
Collapse
Affiliation(s)
- Xiaoyu Li
- Key Laboratory of Advanced Civil Engineering Materials, Ministry of Education, Shanghai Key Laboratory of Development and Application for Metal-Functional Materials, School of Materials Science & Engineering, Tongji University, 4800 Caoan Road, Shanghai 201804, China
| | - Yuexin Liu
- Key Laboratory of Advanced Civil Engineering Materials, Ministry of Education, Shanghai Key Laboratory of Development and Application for Metal-Functional Materials, School of Materials Science & Engineering, Tongji University, 4800 Caoan Road, Shanghai 201804, China
| | - Mingyuan Gao
- Key Laboratory of Advanced Civil Engineering Materials, Ministry of Education, Shanghai Key Laboratory of Development and Application for Metal-Functional Materials, School of Materials Science & Engineering, Tongji University, 4800 Caoan Road, Shanghai 201804, China
| | - Kefeng Cai
- Key Laboratory of Advanced Civil Engineering Materials, Ministry of Education, Shanghai Key Laboratory of Development and Application for Metal-Functional Materials, School of Materials Science & Engineering, Tongji University, 4800 Caoan Road, Shanghai 201804, China.
| |
Collapse
|
11
|
Mansoorianfar M, Shahin K, Hojjati-Najafabadi A, Pei R. MXene-laden bacteriophage: A new antibacterial candidate to control bacterial contamination in water. CHEMOSPHERE 2022; 290:133383. [PMID: 34952017 DOI: 10.1016/j.chemosphere.2021.133383] [Citation(s) in RCA: 36] [Impact Index Per Article: 18.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/20/2021] [Revised: 12/10/2021] [Accepted: 12/18/2021] [Indexed: 06/14/2023]
Abstract
In this study, Ti3C2 MXene nanofragments with a size distribution of about 20 nm were laden on the well-characterized bacteriophages via electrostatic bonding, introducing a new antibacterial agent as a modified virus vector to be used in high-risk bacterial environment. At > MIC of MXene, the MXene-functionalized bacteriophage would be much more active in attacking the bacteria because of the high specificity for host receptors' recognition and targeting ability of bacteriophage and bacterial surface negative charge when comparing to the phage alone. Also, the induced positive surface moieties drive MXene nanofragments toward the negative surface charge of bacteria. The main mechanisms are the specific targeting capacity of bacteriophages, often by lysing the host and bursting out, and the physical interaction of MXene nanofragments with the bacterial cell membrane, which may rupture the cell wall in microbial death. The results described that the Ti3C2 MXene significantly enhanced the bacteriophage adsorption rate and stability over long-standing cultivation in aquatic environments providing superior antibacterial efficacy against the bacterial cells target. The Ti3C2 MXene-laden bacteriophage demonstrated a fast, efficient attaching to bacterial host cells, high antibacterial potential, and reduced 99.99% of the artificial contamination in water samples. Interestingly, no re-growth of target bacteria was observed in the samples during the experiment period, and the count of bacteria constantly remained below the detection threshold. This research raises attention in proposing a novel antibacterial agent to be synthesized through a simple one-step technique devoid of shortcomings of post-treatments in conventional antibacterial treatments.
Collapse
Affiliation(s)
- Mojtaba Mansoorianfar
- CAS Key Laboratory for Nano-Bio Interface, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China
| | - Khashayar Shahin
- Center for Microbes, Development, and Health (CMDH), Institute Pasteur of Shanghai, Chinese Academy of Sciences, Shanghai, 200025, China
| | - Akbar Hojjati-Najafabadi
- College of Rare Earths, Jiangxi University of Science and Technology, No.86, Hongqi Ave., Ganzhou, Jiangxi, 341000, PR China; Faculty of Materials, Metallurgy and Chemistry, School of Materials Science and Engineering, Jiangxi University of Science and Technology, Ganzhou, 341000, China
| | - Renjun Pei
- CAS Key Laboratory for Nano-Bio Interface, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, 215123, China.
| |
Collapse
|
12
|
Xu T, Du H, Liu H, Liu W, Zhang X, Si C, Liu P, Zhang K. Advanced Nanocellulose-Based Composites for Flexible Functional Energy Storage Devices. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2101368. [PMID: 34561914 DOI: 10.1002/adma.202101368] [Citation(s) in RCA: 94] [Impact Index Per Article: 31.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/17/2021] [Revised: 06/05/2021] [Indexed: 05/23/2023]
Abstract
With the increasing demand for wearable electronics (such as smartwatch equipment, wearable health monitoring systems, and human-robot interface units), flexible energy storage systems with eco-friendly, low-cost, multifunctional characteristics, and high electrochemical performances are imperative to be constructed. Nanocellulose with sustainable natural abundance, superb properties, and unique structures has emerged as a promising nanomaterial, which shows significant potential for fabricating functional energy storage systems. This review is intended to provide novel perspectives on the combination of nanocellulose with other electrochemical materials to design and fabricate nanocellulose-based flexible composites for advanced energy storage devices. First, the unique structural characteristics and properties of nanocellulose are briefly introduced. Second, the structure-property-application relationships of these composites are addressed to optimize their performances from the perspective of processing technologies and micro/nano-interface structure. Next, the recent specific applications of nanocellulose-based composites, ranging from flexible lithium-ion batteries and electrochemical supercapacitors to emerging electrochemical energy storage devices, such as lithium-sulfur batteries, sodium-ion batteries, and zinc-ion batteries, are comprehensively discussed. Finally, the current challenges and future developments in nanocellulose-based composites for the next generation of flexible energy storage systems are proposed.
Collapse
Affiliation(s)
- Ting Xu
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, 300457, China
| | - Haishun Du
- Department of Chemical Engineering, Auburn University, Auburn, AL, 36849, USA
| | - Huayu Liu
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, 300457, China
| | - Wei Liu
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, 300457, China
| | - Xinyu Zhang
- Department of Chemical Engineering, Auburn University, Auburn, AL, 36849, USA
| | - Chuanling Si
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, 300457, China
| | - Peiwen Liu
- Department of Wood Technology and Wood-Based Composites, University of Göttingen, D-37077, Göttingen, Germany
- College of Engineering, Huazhong Agricultural University, Wuhan, 430070, China
| | - Kai Zhang
- Department of Wood Technology and Wood-Based Composites, University of Göttingen, D-37077, Göttingen, Germany
| |
Collapse
|
13
|
Rosén T, Hsiao BS, Söderberg LD. Elucidating the Opportunities and Challenges for Nanocellulose Spinning. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2001238. [PMID: 32830341 DOI: 10.1002/adma.202001238] [Citation(s) in RCA: 25] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/21/2020] [Revised: 05/31/2020] [Indexed: 05/07/2023]
Abstract
Man-made continuous fibers play an essential role in society today. With the increase in global sustainability challenges, there is a broad spectrum of societal needs where the development of advanced biobased fibers could provide means to address the challenges. Biobased regenerated fibers, produced from dissolved cellulose are widely used today for clothes, upholstery, and linens. With new developments in the area of advanced biobased fibers, it would be possible to compete with high-performance synthetic fibers such as glass fibers and carbon fibers as well as to provide unique functionalities. One possible development is to fabricate fibers by spinning filaments from nanocellulose, Nature's nanoscale high-performance building block, which will require detailed insights into nanoscale assembly mechanisms during spinning, as well as knowledge regarding possible functionalization. If successful, this could result in a new class of man-made biobased fibers. This work aims to identify the progress made in the field of spinning of nanocellulose filaments, as well as outline necessary steps for efficient fabrication of such nanocellulose-based filaments with controlled and predictable properties.
Collapse
Affiliation(s)
- Tomas Rosén
- Wallenberg Wood Science Center, KTH Royal Institute of Technology, Stockholm, S-100 44, Sweden
| | - Benjamin S Hsiao
- Chemistry Department, Stony Brook University, Stony Brook, NY, 11794-3400, USA
| | - L Daniel Söderberg
- Wallenberg Wood Science Center, KTH Royal Institute of Technology, Stockholm, S-100 44, Sweden
| |
Collapse
|
14
|
Ray U, Zhu S, Pang Z, Li T. Mechanics Design in Cellulose-Enabled High-Performance Functional Materials. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2002504. [PMID: 32794349 DOI: 10.1002/adma.202002504] [Citation(s) in RCA: 26] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/12/2020] [Revised: 06/17/2020] [Indexed: 05/08/2023]
Abstract
The abundance of cellulose found in natural resources such as wood, and the wide spectrum of structural diversity of cellulose nanomaterials in the form of micro-nano-sized particles and fibers, have sparked a tremendous interest to utilize cellulose's intriguing mechanical properties in designing high-performance functional materials, where cellulose's structure-mechanics relationships are pivotal. In this progress report, multiscale mechanics understanding of cellulose, including the key role of hydrogen bonding, the dependence of structural interfaces on the spatial hydrogen bond density, the effect of nanofiber size and orientation on the fracture toughness, are discussed along with recent development on enabling experimental design techniques such as structural alteration, manipulation of anisotropy, interface and topology engineering. Progress in these fronts renders cellulose a prospect of being effectuated in an array of emerging sustainable applications and being fabricated into high-performance structural materials that are both strong and tough.
Collapse
Affiliation(s)
- Upamanyu Ray
- Department of Mechanical Engineering, University of Maryland, College Park, MD, 20742, USA
| | - Shuze Zhu
- Center for X-Mechanics, Key Laboratory of Soft Machines and Smart Devices of Zhejiang Province, Department of Engineering Mechanics, Zhejiang University, Hangzhou, 310027, China
| | - Zhenqian Pang
- Department of Mechanical Engineering, University of Maryland, College Park, MD, 20742, USA
| | - Teng Li
- Department of Mechanical Engineering, University of Maryland, College Park, MD, 20742, USA
| |
Collapse
|
15
|
De France K, Zeng Z, Wu T, Nyström G. Functional Materials from Nanocellulose: Utilizing Structure-Property Relationships in Bottom-Up Fabrication. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2000657. [PMID: 32267033 DOI: 10.1002/adma.202000657] [Citation(s) in RCA: 75] [Impact Index Per Article: 25.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/29/2020] [Revised: 02/07/2020] [Accepted: 02/10/2020] [Indexed: 05/19/2023]
Abstract
It is inherently challenging to recapitulate the precise hierarchical architectures found throughout nature (such as in wood, antler, bone, and silk) using synthetic bottom-up fabrication strategies. However, as a renewable and naturally sourced nanoscale building block, nanocellulose-both cellulose nanocrystals and cellulose nanofibrils-has gained significant research interest within this area. Altogether, the intrinsic shape anisotropy, surface charge/chemistry, and mechanical/rheological properties are some of the critical material properties leading to advanced structure-based functionality within nanocellulose-based bottom-up fabricated materials. Herein, the organization of nanocellulose into biomimetic-aligned, porous, and fibrous materials through a variety of fabrication techniques is presented. Moreover, sophisticated material structuring arising from both the alignment of nanocellulose and via specific process-induced methods is covered. In particular, design rules based on the underlying fundamental properties of nanocellulose are established and discussed as related to their influence on material assembly and resulting structure/function. Finally, key advancements and critical challenges within the field are highlighted, paving the way for the fabrication of truly advanced materials from nanocellulose.
Collapse
Affiliation(s)
- Kevin De France
- Laboratory for Cellulose and Wood Materials, Swiss Federal Laboratories for Materials Science and Technology (Empa), Überlandstrasse 129, Dübendorf, 8600, Switzerland
| | - Zhihui Zeng
- Laboratory for Cellulose and Wood Materials, Swiss Federal Laboratories for Materials Science and Technology (Empa), Überlandstrasse 129, Dübendorf, 8600, Switzerland
| | - Tingting Wu
- Laboratory for Cellulose and Wood Materials, Swiss Federal Laboratories for Materials Science and Technology (Empa), Überlandstrasse 129, Dübendorf, 8600, Switzerland
| | - Gustav Nyström
- Laboratory for Cellulose and Wood Materials, Swiss Federal Laboratories for Materials Science and Technology (Empa), Überlandstrasse 129, Dübendorf, 8600, Switzerland
- Department of Health Science and Technology, ETH Zürich, Schmelzbergstrasse 9, Zürich, 8092, Switzerland
| |
Collapse
|
16
|
Miyashiro D, Hamano R, Umemura K. A Review of Applications Using Mixed Materials of Cellulose, Nanocellulose and Carbon Nanotubes. NANOMATERIALS (BASEL, SWITZERLAND) 2020; 10:E186. [PMID: 31973149 PMCID: PMC7074973 DOI: 10.3390/nano10020186] [Citation(s) in RCA: 51] [Impact Index Per Article: 12.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/26/2019] [Revised: 01/14/2020] [Accepted: 01/16/2020] [Indexed: 02/06/2023]
Abstract
Carbon nanotubes (CNTs) have been extensively studied as one of the most interesting nanomaterials for over 25 years because they exhibit excellent mechanical, electrical, thermal, optical, and electrical properties. In the past decade, the number of publications and patents on cellulose and nanocellulose (NC) increased tenfold. Research on NC with excellent mechanical properties, flexibility, and transparency is accelerating due to the growing environmental problems surrounding us such as CO2 emissions, the accumulation of large amounts of plastic, and the depletion of energy resources such as oil. Research on mixed materials of cellulose, NC, and CNTs has been expanding because these materials exhibit various characteristics that can be controlled by varying the combination of cellulose, NC to CNTs while also being biodegradable and recyclable. An understanding of these mixed materials is required because these characteristics are diverse and are expected to solve various environmental problems. Thus far, many review papers on cellulose, NC or CNTs have been published. Although guidance for the suitable application of these mixed materials is necessary, there are few reviews summarizing them. Therefore, this review introduces the application and feature on mixed materials of cellulose, NC and CNTs.
Collapse
Affiliation(s)
- Daisuke Miyashiro
- Department of Physics, Tokyo University of Science, 1-3 Kagurazaka, Shinjuku-ku, Tokyo 162-8601, Japan; (R.H.); (K.U.)
- ESTECH CORP., 2-7-31 Fukuura, Kanazawa-ku, Yokohama 236-0004, Japan
| | - Ryo Hamano
- Department of Physics, Tokyo University of Science, 1-3 Kagurazaka, Shinjuku-ku, Tokyo 162-8601, Japan; (R.H.); (K.U.)
| | - Kazuo Umemura
- Department of Physics, Tokyo University of Science, 1-3 Kagurazaka, Shinjuku-ku, Tokyo 162-8601, Japan; (R.H.); (K.U.)
| |
Collapse
|
17
|
Shishehbor M, Pouranian MR. Tuning the Mechanical and Adhesion Properties of Carbon Nanotubes Using Aligned Cellulose Wrap (Cellulose Nanotube): A Molecular Dynamics Study. NANOMATERIALS 2020; 10:nano10010154. [PMID: 31963187 PMCID: PMC7022496 DOI: 10.3390/nano10010154] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/17/2019] [Revised: 01/08/2020] [Accepted: 01/14/2020] [Indexed: 11/16/2022]
Abstract
Improving the adhesion properties of carbon nanotubes (CNTs) at the molecular scale can significantly enhance dispersion of CNT fibers in polymer matrix and unleash the dormant extraordinary mechanical properties of CNTs in CNT-polymer nanocomposites. Inspired by the outstanding adhesion, dispersion, mechanical, and surface functionalization properties of crystalline nanocellulose (CNC), this paper studies the mechanical and adhesion properties of CNT wrapped by aligned cellulose chains around CNT using molecular dynamic simulations. The strength, elastic modulus, and toughness of CNT-cellulose fiber for different cellulose contents are obtained from tensile and compression tests. Additionally, the effect of adding cellulose on the surface energy, interfacial shear modulus, and strength is evaluated. The result shows that even adding a single layer cellulose wrap (≈55% content) significantly decreases the mechanical properties, however, it also dramatically enhances the adhesion energy, interfacial shear strength, and modulus. Adding more cellulose layers, subsequently, deceases and increases mechanical properties and adhesion properties, respectively. In addition, analysis of nanopapers of pristine CNT, pristine CNC, and CNT-wrapped cellulose reveals that CNT-wrapped cellulose nanopapers are strong, stiff, and tough, while for CNT and CNC either strength or toughness is compromised. This research shows that cellulose wraps provide CNT fibers with tunable mechanical properties and adhesion energy that could yield strong and tough materials due to the excellent mechanical properties of CNT and active surface and hydrogen bonding of cellulose.
Collapse
|