Hyaluronic Acid-Based Dissolving Microneedle Patch Loaded with Methotrexate for Improved Treatment of Psoriasis

Topical Application of Nitrate Ameliorates Skin Fibrosis by Regulating ST2+CD4+ T Cells in Systemic Sclerosis Mouse Model

Systemic sclerosis (SSc) is characterized by intractable multiorgan fibrosis caused by vascular and immune dysfunction. Currently, effective therapeutic options for patients with SSc are limited. Nitrate, an abundant nutrient in the diet, has been demonstrated to be preventative and therapeutic for several diseases. To determine whether nitrate can slow or reverse SSc progression, topical application of nitrate delivered by dissolving microneedles was used to treat a bleomycin (BLM)-induced dermal fibrosis mouse model. In this study, nitrate considerably attenuated dermal thickness, stiffness, and collagen deposition. Bulk RNA sequencing of skin revealed that Cd4 was a key hub gene in SSc nitrate therapy. Additionally, BLM-induced cytokines and chemokines were inhibited by nitrate, and CD4+ T cells infiltration markedly declined. Il4, Il6, Il13, and Tgfb expression in CD4+ T cells isolated from skin biopsies also significantly decreased. Mechanistically, Il1rl1, a type2 immune response inducer, was markedly repressed in isolated CD4+ T cells and dermal tissues after nitrate treatment. Remarkably, compared with wild type mice, mice lacking Il1rl1 showed impaired transcriptional profiles after intradermal BLM injection. Adoptive transfer of ST2+CD4+ T cells promoted bleomycin-induced Rag2-/- mice dermal fibrosis. Collectively, these findings demonstrate that nitrate targeting ST2+CD4+ T cells is an effective therapeutic option for SSc.

Dissolvable microneedles in the skin: Determination the impact of barrier disruption and dry skin on dissolution

Dissolvable microneedles (DMNs), fabricated from biocompatible materials that dissolve in both water and skin have gained popularity in dermatology. However, limited research exists on their application in compromised skin conditions. This study compares the hyaluronic acid-based DMNs penetration, formation of microchannels, dissolution, and diffusion kinetics in intact, barrier-disrupted (tape stripped), and dry (acetone-treated) porcine ear skin ex vivo. After DMNs application, comprehensive investigations including dermoscopy, stereomicroscope, skin hydration, transepidermal water loss (TEWL), optical coherence tomography (OCT), reflectance confocal laser scanning microscopy (RCLSM), confocal Raman micro-spectroscopy (CRM), two-photon tomography combined with fluorescence lifetime imaging (TPT-FLIM), histology, and scanning electron microscopy (SEM) were conducted. The 400 µm long DMNs successfully penetrated the skin to depths of ≈200 µm for dry skin and ≈200-290 µm for barrier-disrupted skin. Although DMNs fully inserted into all skin conditions, their dissolution rates were high in barrier-disrupted and low in dry skin, as observed through stereomicroscopy and TPT-FLIM. The dissolved polymer exhibited a more significant expansion in barrier-disrupted skin compared to intact skin, with the smallest increase observed in dry skin. Elevated TEWL and reduced skin hydration levels were evident in barrier-disrupted and dry skins compared to intact skin. OCT and RCLSM revealed noticeable skin indentation and pronounced microchannel areas, particularly in barrier-disrupted and dry skin. Additional confirmation of DMN effects on the skin and substance dissolution was obtained through histology, SEM, and CRM techniques. This study highlights the impact of skin condition on DMN effectiveness, emphasizing the importance of considering dissolvability and dissolution rates of needle materials, primarily composed of hyaluronic acid, for optimizing DMN-based drug delivery.

Microneedle-assisted dual delivery of PUMA gene and celastrol for synergistic therapy of rheumatoid arthritis through restoring synovial homeostasis

Abnormal proliferation of aggressive fibroblast-like synoviocytes (FLS) and perpetuate synovial inflammation can inevitably accelerate the progression of rheumatoid arthritis (RA). Herein, a strategy of simultaneously promoting FLS apoptosis and inhibiting inflammation as mediated by macrophages is proposed to restore synovial homeostasis for effective RA therapy. A hyaluronic acid-based dissolvable microneedle (MN) is fabricated for transdermal delivery of dual human serum albumin (HSA)-contained biomimetic nanocomplexes to regulate RA FLS and macrophages. Upon skin insertion, dual nanocomplexes are released rapidly from the MN and accumulate in RA joint microenvironment through both passive and active targeting as mediated by HSA. Thioketal-crosslinked fluorinated polyethyleneimine 1.8 K (TKPF) was constructed to bind the plasmid encoding pro-apoptotic gene PUMA with HSA coating layer (TKPF/pPUMA@HSA, TPH). TPH nanocomplexes can upregulate PUMA through RA FLS transfection to trigger efficient apoptosis. Also, HSA nanocomplexes encapsulating the classic anti-inflammatory natural product celastrol (Cel@HSA, CH) can inhibit inflammation of macrophages through blocking NF-κB pathway activation. TPH/CH MN can deplete RA FLS and inhibit M1 macrophage activation, suppress synovial hyperplasia as well as reduce bone and cartilage erosion in a collagen-induced arthritis (CIA) mouse model, demonstrating a promising strategy for efficient RA treatment.

Hyaluronic acid dissolving microneedle patch loaded with tranexamic acid for melasma treatment

Melasma is an acquired hypermelanotic condition characterized by the presence of irregular light-to-dark brown macules that primarily manifest on the sun-exposed areas of the skin, particularly the face. The management of melasma poses significant challenges, as it is often recalcitrant to treatment and tends to recur despite successful treatment. In this study, we explored a safe, easy, and effective melasma treatment strategy. A hyaluronic acid (HA)-based microneedle (MN) patch loaded with tranexamic acid (TXA) was designed to deliver the necessary medication for melasma treatment. The MN patch features uniform needles with adequate mechanical strength and effective penetration and solubility in the skin without cytotoxicity. Remarkably, these MNs substantially reduce the thickness of the epidermis of melasma mice, curtail melanin production, and diminish dopachrome tautomerase (DCT) expression.

Microneedles Based on a Biodegradable Polymer-Hyaluronic Acid

Transdermal transport can be challenging due to the difficulty in diffusing active substances through the outermost layer of the epidermis, as the primary function of the skin is to protect against the entry of exogenous compounds into the body. In addition, penetration of the epidermis for substances hydrophilic in nature and particles larger than 500 Da is highly limited due to the physiological properties and non-polar nature of its outermost layer, namely the stratum corneum. A solution to this problem can be the use of microneedles, which "bypass" the problematic epidermal layer by dispensing the active substance directly into the deeper layers of the skin. Microneedles can be obtained with various materials and come in different types. Of special interest are carriers based on biodegradable and biocompatible polymers, such as polysaccharides. Therefore, this paper reviews the latest literature on methods to obtain hyaluronic acid-based microneedles. It focuses on the current advancements in this field and consequently provides an opportunity to guide future research in this area.

Nanocarrier-Integrated Microneedles: Divulging the Potential of Novel Frontiers for Fostering the Management of Skin Ailments

The various kinds of nanocarriers (NCs) have been explored for the delivery of therapeutics designed for the management of skin manifestations. The NCs are considered as one of the promising approaches for the skin delivery of therapeutics attributable to sustained release and enhanced skin penetration. Despite the extensive applications of the NCs, the challenges in their delivery via skin barrier (majorly stratum corneum) have persisted. To overcome all the challenges associated with the delivery of NCs, the microneedle (MN) technology has emerged as a beacon of hope. Programmable drug release, being painless, and its minimally invasive nature make it an intriguing strategy to circumvent the multiple challenges associated with the various drug delivery systems. The integration of positive traits of NCs and MNs boosts therapeutic effectiveness by evading stratum corneum, facilitating the delivery of NCs through the skin and enhancing their targeted delivery. This review discusses the barrier function of skin, the importance of MNs, the types of MNs, and the superiority of NC-loaded MNs. We highlighted the applications of NC-integrated MNs for the management of various skin ailments, combinational drug delivery, active targeting, in vivo imaging, and as theranostics. The clinical trials, patent portfolio, and marketed products of drug/NC-integrated MNs are covered. Finally, regulatory hurdles toward benchtop-to-bedside translation, along with promising prospects needed to scale up NC-integrated MN technology, have been deliberated. The current review is anticipated to deliver thoughtful visions to researchers, clinicians, and formulation scientists for the successful development of the MN-technology-based product by carefully optimizing all the formulation variables.

Application of hydrogel microneedles in the oral cavity

Microneedles are a transdermal drug delivery system in which the needle punctures the epithelium to deliver the drug directly to deep tissues, thus avoiding the influence of the first-pass effect of the gastrointestinal tract and minimizing the likelihood of pain induction. Hydrogel microneedles are microneedles prepared from hydrogels that have good biocompatibility, controllable mechanical properties, and controllable drug release and can be modified to achieve environmental control of drug release in vivo. The large epithelial tissue in the oral cavity is an ideal site for drug delivery via microneedles. Hydrogel microneedles can overcome mucosal hindrances to delivering drugs to deep tissues; this prevents humidity and a highly dynamic environment in the oral cavity from influencing the efficacy of the drugs and enables them to obtain better therapeutic effects. This article analyzes the materials and advantages of common hydrogel microneedles and reviews the application of hydrogel microneedles in the oral cavity.

Anti-ROS and NIR-II-Responsive Hyaluronic Acid Microneedle Loaded With Baicalin Nanoparticles for Treatment of Psoriasis

In this work, a natural medicine, baicalin, is designed for the treatment of psoriasis with the aid of hyaluronic acid (HA)-based MNs patches. This is also to improve the solubility of baicalin and increase its residence time in infected part, which is made into nanoparticles by complexation with humic acid and Eu2+. The baicalin nanoparticles loaded-MNs exhibit satisfactory rigidity, minimum injury, and controlled drug delivery. The anti-reactive oxygen species (anti-ROS) and anti-inflammatory action are verified by the effective scavenging oxygen and nitrogen radicals. In addition, the loading of baicalin nanoparticles brings remarkable photothermic effect to the MNs, enabling the device to release a controlled drug under near-infrared region II (NIR-II) laser irradiation. With the aid of NIR-II laser, the baicalin-mediated treatment of psoriasis is significantly improved by expediting radical scavenging and suppressing inflammation. The design of baicalin MNs provides a new idea for the treatment of chronic disease.

Minoxidil Nanosuspension-Loaded Dissolved Microneedles for Hair Regrowth

Minoxidil (MIN) is used topically to treat alopecia. However, its low absorption limits its use, warranting a new strategy to enhance its delivery into skin layers. The objective of this study was to evaluate the dermal delivery of MIN by utilizing dissolved microneedles (MNs) loaded with MIN nanosuspension (MIN-NS) for hair regrowth. MIN-NS was prepared by the solvent-antisolvent precipitation technique. The particle size of MIN-NS was 226.7 ± 9.3 nm with a polydispersity index of 0.29 ± 0.17 and a zeta potential of -29.97 ± 1.23 mV. An optimized formulation of MIN-NS was selected, freeze-dried, and loaded into MNs fabricated with sodium carboxymethyl cellulose (Na CMC) polymeric solutions (MIN-NS-loaded MNs). MNs were evaluated for morphology, dissolution rate, skin insertion, drug content, mechanical properties, ex vivo permeation, in vivo, and stability studies. MNs, prepared with 14% Na CMC, were able to withstand a compression force of 32 N for 30 s, penetrate Parafilm M® sheet at a depth of 374-504 µm, and dissolve completely in the skin within 30 min with MIN %recovery of 95.1 ± 6.5%. The release of MIN from MIN-NS-loaded MNs was controlled for 24 h. MIN-NS-loaded MNs were able to maintain their mechanical properties and chemical stability for 4 weeks, when kept at different storage conditions. The in vivo study of the freeze-dried MIN-NS and MIN-NS-loaded MNs proved hair regrowth on rat skin after 11 and 7 days, respectively. These results showed that MIN-NS-loaded MNs could potentially improve the dermal delivery of MIN through the skin to treat alopecia.

Endogenous crude Scutellaria baicalensis polysaccharide robustly enhances one-pot extraction and deglycosylation of baicalin

With the extensive application of baicalein in the treatment of cardiovascular and cerebrovascular diseases, its clinical and market demand has gradually expanded. But the natural yield of baicalein is very low, and it is mainly prepared by the deglycosylation of baicalin. However, the insolubility of baicalin in water significantly limits the deglycosylation of it under biocatalysis. To make biocatalysis of baicalin more efficient and environmental, a strategy was designed to enhance its water solubility through the solubilization mechanism of endogenous biological macromolecules, and the effect on the activity of glucuronidase was further explored. The results showed that wrapping with Scutellaria baicalensis polysaccharide (SBP) significantly improved the solubility of baicalin in water (the water solubility of baicalin increased by 23 times, BI/SBP = 1/12, w/w). It was not only contributed to the efficient production of baicalein by one-pot method, but also effectively improved the deglycosylation rate of baicalin (increase by 47.04 % in aqueous solution). With the help of the solubilization of endogenous polysaccharide on baicalin in aqueous solution, a green, low-cost and efficient method (one-pot method) was designed to simultaneously extract and enzymatic hydrolyze baicalin to prepare baicalein. Under the same conditions, the yield of one-pot method is 87.17 %, which was much higher than that of the conventional method (29.38 %). In addition, one-pot method with the aid of endogenous polysaccharide could simply and conveniently prepare aglycone of other insoluble natural flavonoids, which has a wide range of industrial application value.

Methotrexate-loaded hyaluronan-modified liposomes integrated into dissolving microneedles for the treatment of psoriasis

Methotrexate (MTX) is a first-line drug in treating psoriasis because of its strong anti-proliferation and anti-inflammatory effects. However, systemic administration of MTX will lead to many side effects, such as gastrointestinal irritation, liver and kidney toxicity, etc. Herein, we developed liposome-loaded microneedles (MNs) system to improve transdermal efficiency, which was used to overcome the problems of low transdermal efficiency and poor therapeutic effect of traditional transdermal drug delivery methods. Hyaluronic acid (HA) was modified on the surface of MTX-loaded liposomes. The interaction of HA and CD44 could increase the adhesion of HA-MTX-Lipo to HaCaT cells, thereby promoting the apoptosis or death of HaCaT cells. Results indicated HA-MTX-Lipo MNs could inhibit the development of psoriasis and reduce the degree of skin erythema, scaling, and thickening. The mRNA levels of proinflammatory cytokines such as IL-17A, IL-23, and TNF-α were decreased. The epidermal thickness and proliferative cell-associated antigen Ki67 expression were also reduced. Specifically, the expression of mRNA levels of proinflammatory cytokines was down-regulated. The MNs transdermal delivery of HA-modified-MTX liposomes provided a promising method for treating psoriasis.

Endogenous stimuli-responsive separating microneedles to inhibit hypertrophic scar through remodeling the pathological microenvironment

Hypertrophic scar (HS) considerably affects the appearance and causes tissue dysfunction in patients. The low bioavailability of 5-fluorouracil poses a challenge for HS treatment. Here we show a separating microneedle (MN) consisting of photo-crosslinked GelMA and 5-FuA-Pep-MA prodrug in response to high reactive oxygen species (ROS) levels and overexpression of matrix metalloproteinases (MMPs) in the HS pathological microenvironment. In vivo experiments in female mice demonstrate that the retention of MN tips in the tissue provides a slowly sustained drug release manner. Importantly, drug-loaded MNs could remodel the pathological microenvironment of female rabbit ear HS tissues by ROS scavenging and MMPs consumption. Bulk and single cell RNA sequencing analyses confirm that drug-loaded MNs could reverse skin fibrosis through down-regulation of BCL-2-associated death promoter (BAD), insulin-like growth factor 1 receptor (IGF1R) pathways, simultaneously regulate inflammatory response and keratinocyte differentiation via up-regulation of toll-like receptors (TOLL), interleukin-1 receptor (IL1R) and keratinocyte pathways, and promote the interactions between fibroblasts and keratinocytes via ligand-receptor pair of proteoglycans 2 (HSPG2)-dystroglycan 1(DAG1). This study reveals the potential therapeutic mechanism of drug-loaded MNs in HS treatment and presents a broad prospect for clinical application.

Microneedle-assisted percutaneous delivery of methotrexate-loaded nanoparticles enabling sustained anti-inflammatory effects in psoriasis therapy

Methotrexate (MTX) is one of the first-line drugs used for the treatment of moderate to severe psoriasis. However, low bioavailability and systemic side effects of traditional oral and injectable MTX greatly limit its clinical application. Delivering MTX using dissolving microneedles (MNs) into psoriasis-like skin lesion could improve the in situ therapeutic effects with higher bioavailability and less side effects. Here, we propose a novel therapeutic approach for psoriasis involving MN-assisted percutaneous delivery of chitosan-coated hollow mesoporous silica nanoparticles containing MTX (MTX@HMSN/CS). The MTX@HMSN/CS-loaded MNs were strong enough to successfully penetrate the psoriasiform thickened epidermis, allowing MTX@HMSN/CS to be accurately delivered to the site of skin lesion following the rapid dissolution of MNs. MTX was then released continuously from HMSN/CS for at least one week to maintain effective therapeutic drug concentration for skin lesion with long-term anti-proliferative and anti-inflammatory effects. Incubation with MTX@HMSN/CS not only inhibited the proliferation of human immortalized keratinocytes (HaCaT cells), but also significantly reduced the expression of proinflammatory cytokines and chemokines. In addition, MTX@HMSN/CS-loaded MNs showed better efficacy in alleviating psoriasis-like skin inflammation than MTX-loaded MNs at the same dose. Compared to psoriasiform mice treated with 15.8 μg MTX-loaded MNs every day, 47.4 μg MTX@HMSN/CS-loaded MNs reduce the frequency of treatment to once every 3 days and achieve comparable amelioration. Therefore, MTX@HMSN/CS loaded MNs are a promising treatment strategy for psoriasis due to their durability, efficacy, convenience, and safety in relieving psoriasis-like skin inflammation.

Efficient Loading and Sustained Delivery of Methotrexate Using a Tip-Swellable Microneedle Array Patch for Psoriasis Treatment

Methotrexate (MTX), a primary treatment for moderate to severe psoriasis, is limited in clinical use due to suboptimal results and severe side effects from subcutaneous (SC) injection and oral administration. Microneedles offer a promising alternative for direct MTX delivery to targeted skin lesions, but issues such as drug wastage, dosage inaccuracy, and limited drug residence time in the lesions remain. This study introduces a tip-swellable microneedle array patch (TSMAP) using photo-cross-linked methacrylated hyaluronic acid (MeHA) and biocompatible resin for effective MTX loading and sustained delivery. A two-cast micromolding with vacuum drying is employed to concentrate cross-linked MeHA in about 30% of the needle's height at the tip, thereby ensuring that only the TSMAP tip swells. Efficient MTX loading into TSMAP tips is achieved through a 30 s drug solution immersion and 10 min drying, potentially minimizing drug waste from incomplete skin insertion due to skin elasticity. The MTX-loaded TSMAP effectively penetrates both porcine and psoriasis-like mouse skin with its tips detaching from the resin substrate and embedding deeply into the skin tissue, thereby functioning as a drug release reservoir. TSMAP significantly prolongs drug retention in skin compared with SC injection and dissolvable microneedles. The in vivo study demonstrates that TSMAP-mediated MTX delivery substantially enhances therapeutic outcomes in alleviating psoriasis symptoms and downregulating psoriasis-associated cytokines, outperforming oral administration, SC injection, and dissolvable microneedles. Thus, TSMAP could offer an efficient and user-friendly alternative for drug administration in the treatment of various skin diseases.

Design and fabrication of customizable microneedles enabled by 3D printing for biomedical applications

Microneedles (MNs) is an emerging technology that employs needles ranging from 10 to 1000 μm in height, as a minimally invasive technique for various procedures such as therapeutics, disease monitoring and diagnostics. The commonly used method of fabrication, micromolding, has the advantage of scalability, however, micromolding is unable to achieve rapid customizability in dimensions, geometries and architectures, which are the pivotal factors determining the functionality and efficacy of the MNs. 3D printing offers a promising alternative by enabling MN fabrication with high dimensional accuracy required for precise applications, leading to improved performance. Furthermore, enabled by its customizability and one-step process, there is propitious potential for growth for 3D-printed MNs especially in the field of personalized and on-demand medical devices. This review provides an overview of considerations for the key parameters in designing MNs, an introduction on the various 3D-printing techniques for fabricating this new generation of MNs, as well as highlighting the advancements in biomedical applications facilitated by 3D-printed MNs. Lastly, we offer some insights into the future prospects of 3D-printed MNs, specifically its progress towards translation and entry into market.

Potential strategy of microneedle-based transdermal drug delivery system for effective management of skin-related immune disorders

Skin-related immune disorders are a category of diseases that lead to the dysregulation of the body's immune response due to imbalanced immune regulation. These disorders exhibit diverse clinical manifestations and complicated pathogenesis. The long-term use of corticosteroids, anti-inflammatory drugs, and immunosuppressants as traditional treatment methods for skin-related immune disorders frequently leads to adverse reactions in patients. In addition, the effect of external preparations is not ideal in some cases due to the compacted barrier function of the stratum corneum (SC). Microneedles (MNs) are novel transdermal drug delivery systems that have theapparent advantages ofpenetrating the skin barrier, such as long-term and controlled drug delivery, less systemic exposure, and painless and minimally invasive targeted delivery. These advantages make it a good candidate formulation for the treatment of skin-related immune disorders and a hotspot for research in this field. This paper updates the classification, preparation, evaluation strategies, materials, and related applications of five types of MNs. Specific information, including the mechanical properties, dimensions, stability, and in vitro and in vivo evaluations of MNs in the treatment of skin-related immune disorders, is also discussed. This review provides an overview of the advances and applications of MNs in the effective treatment of skin-related immune disorders and their emerging trends.

Fabrication Technology of Self-Dissolving Sodium Hyaluronate Gels Ultrafine Microneedles for Medical Applications with UV-Curing Gas-Permeable Mold

Microneedles are of great interest in diverse fields, including cosmetics, drug delivery systems, chromatography, and biological sensing for disease diagnosis. Self-dissolving ultrafine microneedles of pure sodium hyaluronate hydrogels were fabricated using a UV-curing TiO2-SiO2 gas-permeable mold polymerized by sol-gel hydrolysis reactions in nanoimprint lithography processes under refrigeration at 5 °C, where thermal decomposition of microneedle components can be avoided. The moldability, strength, and dissolution behavior of sodium hyaluronate hydrogels with different molecular weights were compared to evaluate the suitability of ultrafine microneedles with a bottom diameter of 40 μm and a height of 80 μm. The appropriate molecular weight range and formulation of pure sodium hyaluronate hydrogels were found to control the dissolution behavior of self-dissolving ultrafine microneedles while maintaining the moldability and strength of the microneedles. This fabrication technology of ultrafine microneedles expands their possibilities as a next-generation technique for bioactive gels for controlling the blood levels of drugs and avoiding pain during administration.

Liquiritin targeting Th17 cells differentiation and abnormal proliferation of keratinocytes alleviates psoriasis via NF-κB and AP-1 pathway

Psoriasis is a common immune-mediated inflammatory skin disease, caused by disturbed interactions between keratinocytes and immune cells. Chinese medicine shows potential clinical application for its treatment. Liquiritin is a flavone compound extracted from licorice and shows potential antitussive, antioxidant and antiinflammatory effects, and therefore may have potential as a psoriasis therapeutic. The aim of this work was to examine the possible roles that liquiritin may have in treating psoriasis. HaCaT cells were stimulated by TNF-α with or without liquiritin, harvested for analysis by western blots and RT-qPCR, and the cellular supernatants were collected and analyzed by ELISA for cytokines. In addition, 4 groups of mice were examined: Normal, Vehicle, LQ-L and LQ-H. The mice were sacrificed after 6 days and analyzed using IHC, ELISA, RT-qPCR and flow cytometry. The results showed that liquiritin could significantly inhibit the progression of psoriasis both in vitro and in vivo. Liquiritin strongly suppressed the proliferation of HaCaT keratinocytes but did not affect cell viability. Moreover, liquiritin alleviated imiquimod-induced psoriasis-like skin inflammation and accumulation of Th17 cells and DCs in vivo. In TNF-α-induced HaCaT keratinocytes, both protein and mRNA expression levels of inflammatory cytokines were sharply decreased. In imiquimod-induced mice, the activation of NF-κB and AP-1 was reduced after treatment with liquiritin. Collectively, our results show that liquiritin might act as a pivotal regulator of psoriasis via modulating NF-κB and AP-1 signal pathways.

Drug Delivery Systems based on Microneedles for Dermatological Diseases and Aesthetic Enhancement

Microneedle (MN) devices comprise of micron-sized structures that circumvent biological barriers in a minimally invasive manner. MN research continues to grow and evolve; the technology was recently identified as one of the top ten overall emerging technologies of 2020. There is a growing interest in using such devices in cosmetology and dermatological conditions where the MNs mechanically disrupt the outer skin barrier layer, creating transient pathways that allow the passage of materials to underlying skin layers. This review aims to appraise the application of microneedle technologies in skin science, provide information on potential clinical benefits, as well as indicate possible dermatological conditions that can benefit from this technology, including autoimmunemediated inflammatory skin diseases, skin aging, hyperpigmentation, and skin tumors. A literature review was carried out to select studies that evaluated the use of microneedles to enhance drug delivery for dermatologic purposes. MN patches create temporary pathways that allow the passage of therapeutic material to deeper layers of the skin. Given their demonstrable promise in therapeutic applications it will be essential for healthcare professionals to engage with these new delivery systems as they transition to the clinic.

Tiny titans- unravelling the potential of polysaccharides and proteins based dissolving microneedles in drug delivery and theranostics: A comprehensive review

In recent years, microneedles (MNs) have emerged as a promising alternative to traditional drug delivery systems in transdermal drug delivery. The use of MNs has demonstrated significant potential in improving patient acceptance and convenience while avoiding the invasiveness of traditional injections. Dissolving, solid, hollow, coated, and hydrogel microneedles are among the various types studied for drug delivery. Dissolving microneedles (DMNs), in particular, have gained attention for their safety, painlessness, patient convenience, and high delivery efficiency. This comprehensive review primarily focuses on different types of microneedles, fabrication methods, and materials used in fabrication of DMNs such as hyaluronic acid, chitosan, alginate, gelatin, collagen, silk fibroin, albumin, cellulose and starch, to list a few. The review also provides an exhaustive discussion on the applications of DMNs, including the delivery of vaccines, cosmetic agents, contraceptives, hormone and genes, and other therapeutic applications like for treating cancer, skin diseases, and diabetes, among others, are covered in this review. Additionally, this review highlights some of the DMN systems that are presently undergoing clinical trials. Finally, the review discusses current advances and trends in DMNs, as well as future prospective directions for this ground-breaking technology in drug delivery.

Advances in Formulations of Microneedle System for Rheumatoid Arthritis Treatment

Rheumatoid arthritis (RA) is a systemic autoimmune disease characterized by chronic joint inflammation, eventually leading to severe disability and premature death. At present, the treatment of RA is mainly to reduce inflammation, swelling, and pain. Commonly used drugs are non-steroidal anti-inflammatory drugs (NSAIDs), glucocorticoids, and disease-modifying anti-rheumatic drugs (DMARDs). These drugs lack specificity and require long-term, high-dose administration, which can cause serious adverse effects. In addition, the oral, intravenous, and intra-articular injections will reduce patient compliance, resulting in high cost and low bioavailability. Due to these limitations, microneedles (MNs) have emerged as a new strategy to efficiently localize the drugs in inflamed joints for the treatment of RA. MNs can overcome the cuticle barrier of the skin without stimulating nerves and blood vessels. Which can increase patient compliance, improve bioavailability, and avoid systemic circulation. This review summarizes and evaluates the application of MNs in RA, especially dissolving MNs (DMNs). We encourage the use of MNs to treat RA, by describing the general properties of MNs, materials, preparation technology, drug release mechanism, and advantages. Furthermore, we discussed the biological safety, development prospects, and future challenges of MNs, hoping to provide a new strategy for the treatment of RA.

A Novel Methacryloyl Chitosan Hydrogel Microneedles Patch with Sustainable Drug Release Property for Effective Treatment of Psoriasis

Psoriasis is a chronic and recurrent skin disease that often requires long-term treatment, and topical transdermal drug delivery can reduce systemic side effects. However, it is still a challenge in efficient transdermal drug delivery for psoriasis treatment due to low penetration efficiency of most drugs and the abnormal skin conditions of psoriasis patients. Here, a safe and effective methacryloyl chitosan hydrogel microneedles (CSMA hMNs) patch is developed and served as a sustained drug release platform for the treatment of psoriasis. By systematically optimizing the CSMA preparation, CSMA hMNs with excellent morphological characteristics and strong mechanical properties (0.7 N needle-1 ) are prepared with a concentration of only 3% (w/v) CSMA. As a proof-of-concept, methotrexate (MTX) and nicotinamide (NIC) are loaded into CSMA hMNs patch, which can produce a sustained drug release of 80% within 24 h in vitro. In vivo experiments demonstrated that the CSMA hMNs patch can effectively inhibit the skin thickening and spleen enlargement of psoriatic mice and has a good biosafety profile at sufficient therapeutic doses. This study provides a new idea for the preparation of hMN systems using modified CS or other biocompatible materials and offers an effective therapeutic option for psoriasis treatment.

Wearable Microneedle-Based Array Patches for Continuous Electrochemical Monitoring and Drug Delivery: Toward a Closed-Loop System for Methotrexate Treatment

Wearable devices based on microneedle (MN) technology have recently emerged as tools for in situ transdermal sensing or delivery in interstitial fluid (ISF). Particularly, MN-based electrochemical sensors allow the continuous monitoring of analytes in a minimally invasive manner through ISF. Exogenous small molecules found in ISF such as therapeutic drugs are ideal candidates for MN sensors due to their correlation with blood levels and their relevance for the optimal management of personalized therapies. Herein, a hollow MN array patch is modified with conductive pastes and functionalized with cross-linked chitosan to develop an MN-based voltammetric sensor for continuous monitoring of methotrexate (MTX). Interestingly, the chitosan coating avoids biofouling while enabling the adsorption of MTX at the electrode's surface for sensitive analysis. The MN sensor exhibits excellent analytical performance in vitro with protein-enriched artificial ISF and ex vivo under a Franz diffusion cell configuration. The MN sensor shows a linear range from 25 to 400 μM, which fits within the therapeutic range of high-dose MTX treatment for cancer patients and an excellent continuous operation for more than two days. Moreover, an iontophoretic hollow MN array patch is developed with the integration of both the anode and cathode in the single MN array patch. The ex vivo characterization demonstrates the transdermal on-demand drug delivery of MTX. Overall, the combination of both MN patches represents impactful progress in closed-loop systems for therapeutic drug management in disorders such as cancer, rheumatoid arthritis, or psoriasis.

A tumor microenvironment-responsive microneedle patch for chemodynamic therapy of oral squamous cell carcinoma

Oral squamous cell carcinoma (OSCC) is one of the most common malignant tumors of the head and neck, and this disease has become a threat to public health due to its poor prognosis and high fatality rate. Chemodynamic therapy (CDT) is an emerging oncology treatment based on the Fenton reaction. However, the lack of endogenous hydrogen peroxide (H2O2) in tumor cells and the high concentration of glutathione (GSH) that depletes toxic hydroxyl radicals (·OH) significantly impair the efficacy of CDT. Here, we developed a polyvinyl alcohol (PVA)-based soluble microneedle patch (denoted as Fe3O4 + VC-MN) loaded with Fe3O4 nanoparticles (NPs) and vitamin C (VC) for the effective treatment of OSCC. When Fe3O4 + VC-MNs are inserted into the OSCC tissue, the Fe3O4 NPs and VC loaded in the tip of the needle are released in a targeted manner. After VC is converted into oxidized vitamin C (DHA), it can consume GSH in tumor cells and generate sufficient intracellular H2O2in situ. Moreover, by virtue of their peroxidase-like activity, Fe3O4 NPs can induce the generation of lethal ·OH through the Fenton reaction with the aforementioned H2O2, leading to tumor cell ferroptosis and apoptosis, thus achieving CDT. Collectively, this functional microneedle patch provides a more efficient and minimally invasive targeted drug delivery solution for the treatment of OSCC.

Quality-by-Design Approach for Investigating the Efficacy of Tacrolimus and Hyaluronic Acid-Loaded Ethosomal Gel in Dermal Management of Psoriasis: In Vitro, Ex Vivo, and In Vivo Evaluation

Psoriasis is an auto-immune condition with high keratinocyte hyperproliferation due to lower p53 and p22 levels. Tacrolimus, an immune suppressor, is considered one of the most effective drugs in suppressing psoriasis. Systematic administration of tacrolimus often leads to challenging side effects, namely increased infection risk, renal toxicity, neurological symptoms such as tremors and headaches, gastrointestinal disturbances, hypertension, skin-related problems, etc. To address this, a nanocarrier-based formulation of tacrolimus along with inclusion of hyaluronic acid was developed. The optimization and formulation of ethosomes via the ethanol injection technique were done based on the Box-Behnken experimental design. The results revealed hyaluronic acid-based tacrolimus ethosomes (HA-TAC-ETH) had nanometric vesicle size (315.7 ± 2.2 nm), polydispersity index (PDI) (0.472 ± 0.07), and high entrapment efficiency (88.3 ± 2.52%). The findings of drug release and skin permeation showed sustained drug release with increased dermal flux and enhancement ratio. The effectiveness of HA-TAC-ETH was confirmed in an imiquimod (5%)-prompted psoriasis model. The skin irritation score and Psoriasis Area and Severity Index (PASI) score indicated that HA-TAC-ETH gel has validated a decline in the entire factors (erythema, edema, and thickness) in the imiquimod-induced psoriasis model in contrast with TAC-ETH gel and TAC ointment. The fabricated HA-TAC-ETH opt gel proved to be safe and effective in in vivo studies and could be employed to treat psoriasis further.

Combination therapy using multifunctional dissolvable hyaluronic acid microneedles for oral ulcers

Oral ulcers are common in the oral mucosa. Frequent occurrences of oral ulcers commonly afflict patients, seriously impacting their daily life. Treatments with good anti-inflammatory and antibacterial properties are important for promoting the healing of oral ulcers. In this study, a multifunctional, soluble hyaluronic acid (HA) microneedle (MN) patch was prepared to promote oral ulcer healing. The tip layer of the MN patch was loaded with triamcinolone acetonide (TA) and epidermal growth factor (EGF) to inhibit inflammation and promote angiogenesis. Zeolitic imidazolate framework-8 (ZIF-8) was loaded onto the base layer of the MN patch, which effectively released Zn2+ to mediate antibacterial effects. In addition, HA exerts a protective effect on the mucous membrane. Owing to these properties, the multifunctional MN patches were found to have good anti-inflammatory, antibacterial, and tissue-healing abilities, indicating that the multifunctional MN patch design successfully promoted the healing of oral ulcers.

Transcutaneous Immunotherapy for RNAi: A Cascade-Responsive Decomposable Nanocomplex Based on Polyphenol-Mediated Framework Nucleic Acid in Psoriasis

Skin is the first barrier against external threats, and skin immune dysfunction leads to multiple diseases. Psoriasis is an inflammatory, chronic, common, immune-related skin disease that affects more than 125 million people worldwide. RNA interference (RNAi) therapy is superior to traditional therapies, but rapid degradation and poor cell uptake are the greatest obstacles to its clinical transformation. The transdermal delivery of siRNA and controllable assembly/disassembly of nanodrug delivery systems can maximize the therapeutic effect. Tetrahedral framework nucleic acid (tFNA) is undoubtedly the best carrier for the transdermal transport of genes due to its excellent noninvasive transdermal effect and editability. The authors combine acid-responsive tannic acid (TA), RNase H-responsive sequences, siRNA, and tFNA into a novel transdermal RNAi drug with controllable assembly and disassembly: STT. STT has heightened resistance to enzyme, serum, and lysosomal degradation, and its size is similar to that of tFNA, enabling easy transdermal transport. After transdermal administration, STT can specifically silence nuclear factor kappa-B (NF-κB) p65, thereby maintaining the stability of the skin's microenvironment and reshaping normal skin immune defense. This work demonstrates the advantages of STT in RNAi therapy and the potential for future treatment of skin-related diseases.

Long-acting microneedle formulations

The minimally-invasive and painless nature of microneedle (MN) application has enabled the technology to obviate many issues with injectable drug delivery. MNs not only administer therapeutics directly into the dermal and ocular space, but they can also control the release profile of the active compound over a desired period. To enable prolonged delivery of payloads, various MN types have been proposed and evaluated, including dissolving MNs, polymeric MNs loaded or coated with nanoparticles, fast-separable MNs hollow MNs, and hydrogel MNs. These intricate yet intelligent delivery platforms provide an attractive approach to decrease side effects and administration frequency, thus offer the potential to increase patient compliance. In this review, MN formulations that are loaded with various therapeutics for long-acting delivery to address the clinical needs of a myriad of diseases are discussed. We also highlight the design aspects, such as polymer selection and MN geometry, in addition to computational and mathematical modeling of MNs that are necessary to help streamline and develop MNs with high translational value and clinical impact. Finally, up-scale manufacturing and regulatory hurdles along with potential avenues that require further research to bring MN technology to the market are carefully considered. It is hoped that this review will provide insight to formulators and clinicians that the judicious selection of materials in tandem with refined design may offer an elegant approach to achieve sustained delivery of payloads through the simple and painless application of a MN patch.

Enhanced Transdermal Peptide-Modified Flexible Liposomes for Efficient Percutaneous Delivery of Chrysomycin A to Treat Subcutaneous Melanoma and Intradermal MRSA Infection

Superficial skin diseases, including skin infections and tumors, are common healthcare burdens. In this study, the in vivo activity of chrysomycin A (CA) is explored, and a transdermal liposomal CA formulation is further constructed for the simultaneous treatment of cutaneous melanoma and cutaneous methicillin-resistant Staphylococcus aureus (MRSA) infection. The prepared liposomes (TD-LP-CA) display a strong antitumor effect with an IC50 value of less than 0.1 µm in B16-F10 cells, suppress the proliferation of MRSA with a minimum inhibitory concentration (MIC) of 1 µm, and eradicate established MRSA biofilms at 10× MIC in vitro. More importantly, TD-LP-CA shows enhanced stratum corneum (SC) penetration, reaching more than 500 µm beneath the skin's surface due to modification with the TD peptide, and demonstrates excellent subcutaneous tumor penetration after skin application in vivo. TD-LP-CA displays an excellent therapeutic effect against intradermal MRSA infection in mice after topical dermal administration, as well as a moderate inhibitory effect on subcutaneous melanoma with a 75% tumor inhibition rate. The liposomes prepared herein can be a promising carrier for transcutaneous CA transfer for the treatment of superficial diseases such as skin tumors and infections due to their ability to overcome the skin barrier.

Layered GelMA/PEGDA Hydrogel Microneedle Patch as an Intradermal Delivery System for Hypertrophic Scar Treatment

Hypertrophic scar (HS) is an unfavorable skin disorder that typically develops after trauma, burn injury, or surgical procedures and causes numerous physical and psychological issues in patients. Currently, intralesional multi-injection of corticosteroid, particularly compound betamethasone (CB), is one of the most prevalent treatments for HS. However, injection administration could result in severe pain and dose-related side effects. Additionally, the vacuum therapeutic efficacy of this treatment relies on the level of expertise of the healthcare professional. To overcome the limitations of conventional injections, a new method that is convenient, painless, and self-administrable is urgently required. In this study, we developed a methacrylate gelatin (GelMA)/polyethylene glycol diacrylate (PEGDA) double-network hydrogel microneedle patch loaded with CB (CB-HMNP) as an intradermal delivery system for HS treatment. The double-network structure conferred the CB-HMNP with sufficient mechanical properties to successfully penetrate scar tissue while also helping to regulate the drug's sustained release rate. Subsequently, we confirmed that the CB-HMNP had a pronounced inhibitory effect on human HS fibroblasts (hHSFs), whereas drug-free HMNPs had no effect on hHSFs, indicating its high biocompatibility. In order to assess the therapeutic efficacy of CB-HMNPs, HS models of New Zealand rabbit ears were developed. The administration of CB-HMNP three times significantly decreased the scar elevation index (SEI), collagen I/III, and transforming growth factor-β1 (TGF-β1) protein. Therefore, the CB-HMNP may offer an administration pathway for the treatment of HS that is less painful, more convenient, less invasive, and sustain-released.

Advances in Intelligent Stimuli-Responsive Microneedle for Biomedical Applications

Microneedles (MNs) are a new type of drug delivery method that can be regarded as an alternative to traditional transdermal drug delivery systems. Recently, MNs have attracted widespread attention for their advantages of effectiveness, safety, and painlessness. However, the functionality of traditional MNs is too monotonous and limits their application. To improve the efficiency of disease treatment and diagnosis by combining the advantages of MNs, the concept of intelligent stimulus-responsive MNs is proposed. Intelligent stimuli-responsive MNs can exhibit unique biomedical functions according to the internal and external environment changes. This review discusses the classification and principles of intelligent stimuli-responsive MNs, such as magnet, temperature, light, electricity, reactive oxygen species, pH, glucose, and protein. This review also highlights examples of intelligent stimuli-responsive MNs for biomedical applications, such as on-demand drug delivery, tissue repair, bioimaging, detection and monitoring, and photothermal therapy. These intelligent stimuli-responsive MNs offer the advantages of high biocompatibility, targeted therapy, selective detection, and precision treatment. Finally, the prospects and challenges for the application of intelligent stimuli-responsive MNs are discussed.

Going below and beyond the surface: Microneedle structure, materials, drugs, fabrication, and applications for wound healing and tissue regeneration

Microneedle, as a novel drug delivery system, has attracted widespread attention due to its non-invasiveness, painless and simple administration, controllable drug delivery, and diverse cargo loading capacity. Although microneedles are initially designed to penetrate stratum corneum of skin for transdermal drug delivery, they, recently, have been used to promote wound healing and regeneration of diverse tissues and organs and the results are promising. Despite there are reviews about microneedles, few of them focus on wound healing and tissue regeneration. Here, we review the recent advances of microneedles in this field. We first give an overview of microneedle system in terms of its potential cargos (e.g., small molecules, macromolecules, nucleic acids, nanoparticles, extracellular vesicle, cells), structural designs (e.g., multidrug structures, adhesive structures), material selection, and drug release mechanisms. Then we briefly summarize different microneedle fabrication methods, including their advantages and limitations. We finally summarize the recent progress of microneedle-assisted wound healing and tissue regeneration (e.g., skin, cardiac, bone, tendon, ocular, vascular, oral, hair, spinal cord, and uterine tissues). We expect that our article would serve as a guideline for readers to design their microneedle systems according to different applications, including material selection, drug selection, and structure design, for achieving better healing and regeneration efficacy.

Challenges and Future Trends in the Treatment of Psoriasis

Psoriasis is a chronic inflammatory skin disorder, and current treatments include topical therapies, phototherapy, systemic immune modulators, and biologics, aiming to alleviate symptoms and improve quality of life. However, challenges persist, such as adverse effects, treatment resistance, high costs, and variability in response among individuals. The future of psoriasis treatment shows promising emerging trends. New biologic agents targeting novel pathways, such as interleukin 23 inhibitors like mirikizumab, offer enhanced efficacy. Small molecule inhibitors like RORγt inhibitors and ROCK2 inhibitors provide additional treatment options. Combination therapies, including biologics with methotrexate, may improve treatment response. Advancements in topical treatments utilizing microneedles and nanoparticle-based carriers can enhance drug delivery and improve therapeutic outcomes. Biomarkers and multi-omics technologies hold potential for personalized treatment approaches, thus aiding in diagnosis, predicting treatment response, and guiding therapeutic decisions. Collaboration among researchers, clinicians, and industry stakeholders is crucial to translating these scientific breakthroughs into clinical practice. By addressing current challenges and exploring these promising trends, we can optimize psoriasis management and improve the lives of those affected by this chronic condition.

An inflammation-responsive double-layer microneedle patch for recurrent atopic dermatitis therapy

Seeking a potent therapeutic strategy for alleviating atopic dermatitis (AD) attack and preventing its recurrence is highly desired but remains challenging in clinical practice. Here, we propose an inflammation-responsive double-layer microneedle (IDMN) patch in situ delivering VD3 for recurrent AD therapy. IDMN comprises the backing layer part and the double-layer microneedle part, in which the inner layer is gelatin methacryloyl (GelMA) loaded with VD3 while the outer layer is composed of hyaluronic acid (HA). Introduction of the HA backing layer and outer layer around the GelMA tips can not only provide sufficient mechanical strength to penetrate into hardened AD skin with minimal invasiveness, but also exert a strong moisturizing effect after being rapidly dissolved. The inner layer of GelMA is degraded by the matrix metalloproteinase (MMP) in a dose dependent manner, which is secreted according to the disease progression of AD. The responsive degradation of GelMA tips result in corresponding release of VD3 to treat AD, triggering negative feedback against GelMA degradation. The IDMN administration on AD-bearing mice reveals efficient "curing" performances (including suppress erythema, scaling and lichenification, reduce epidermal thickness, inhibit mast cells infiltration, and down-regulate inflammatory factor secretion), which are basically realized through synergistic effect of the released VD3 and the dissolved HA molecules. Importantly, the residual tips of IDMN with VD3 are retained in the skin after the first AD relief, showing promising "warning" ability to inhibit the recurrence of AD. Hence, the developed IDMN patch is expected to be one of the excellent candidates for AD therapy and other relapsing diseases in clinical fields.

Advance and Challenges in the Treatment of Skin Diseases with the Transdermal Drug Delivery System

Skin diseases are among the most prevalent non-fatal conditions worldwide. The transdermal drug delivery system (TDDS) has emerged as a promising approach for treating skin diseases, owing to its numerous advantages such as high bioavailability, low systemic toxicity, and improved patient compliance. However, the effectiveness of the TDDS is hindered by several factors, including the barrier properties of the stratum corneum, the nature of the drug and carrier, and delivery conditions. In this paper, we provide an overview of the development of the TDDS from first-generation to fourth-generation systems, highlighting the characteristics of each carrier in terms of mechanism composition, penetration method, mechanism of action, and recent preclinical studies. We further investigated the significant challenges encountered in the development of the TDDS and the crucial significance of clinical trials.

Recent advancements in the expedition of microneedles: from lab worktops to diagnostic care centers

Microneedle (MN) technology plays a significant role in bioengineering as it allows for minimally invasive exposure to the skin via the non-invasive procedure, increased drug permeability, and improved biological molecule detectability in the epidermal layers, all while improving therapeutic safety and effectiveness. However, MNs have several significant drawbacks, including difficulty scaling up, variability in drug delivery pattern regarding the skin's external environment, blockage of dermal tissues, induction of inflammatory response at the administration site, and limitation of dosing based on the molecular weight of drug and size. Despite these drawbacks, MNs have emerged as a special transdermal theranostics instrument in clinical research to assess physiological parameters. Bioimaging technology relies on microneedles that can measure particular analytes in the extracellular fluid effectively by crossing the stratum corneum, making them "a unique tool in diagnostics detection and therapeutic application inside the body." This review article discusses the recent advances in the applications especially related to the diagnostics and toxicity challenges of microneedles. In addition, this review article discusses the clinical state and commercial accessibility of microneedle technology-based devices in order to provide new information to scientists and researchers.

Hydrogel-Forming Microneedles with Applications in Oral Diseases Management

Controlled drug delivery in the oral cavity poses challenges such as bacterial contamination, saliva dilution, and inactivation by salivary enzymes upon ingestion. Microneedles offer a location-specific, minimally invasive, and retentive approach. Hydrogel-forming microneedles (HFMs) have emerged for dental diagnostics and therapeutics. HFMs penetrate the stratum corneum, undergo swelling upon contact, secure attachment, and enable sustained transdermal or transmucosal drug delivery. Commonly employed polymers such as polyvinyl alcohol (PVA) and polyvinyl pyrrolidone are crosslinked with tartaric acid or its derivatives while incorporating therapeutic agents. Microneedle patches provide suture-free and painless drug delivery to keratinized or non-keratinized mucosa, facilitating site-specific treatment and patient compliance. This review comprehensively discusses HFMs' applications in dentistry such as local anesthesia, oral ulcer management, periodontal treatment, etc., encompassing animal experiments, clinical trials, and their fundamental impact and limitations, for example, restricted drug carrying capacity and, until now, a low number of dental clinical trial reports. The review explores the advantages and future perspectives of HFMs for oral drug delivery.

Customized flexible hollow microneedles for psoriasis treatment with reduced-dose drug

Microneedles, especially hollow microneedles (HMNs), play an important role in drug delivery, but most of the current HMNs are manufactured based on silicon microfabrication (lithography, etching, etc.), which are slightly conservative due to the lack of low-cost, batch-scale and customized preparation approach, especially for the HMNs with flexible substrate. For the first time, we propose the use of a high-precision 3D printed master mold followed by a dual-molding process for the preparation of HMNs with different shapes, heights, and inner and outer diameters to satisfy different drug delivery needs. The 3D printed master mold and negative mold can be reused, thereby significantly reducing the cost. HMNs are based on biocompatible materials, such as heat-curing polymers or light-curing resins. The thickness and rigidity/flexibility characteristics of the substrate can be customized for different applications. The drug delivery efficiency of the fabricated HMNs was verified by the in situ treatment of psoriasis on the backs of mice, which required only a 0.1-fold oral dose to achieve similar efficacy, and the associated side effects and drug toxicity were reduced. Thus, this dual-molding process can reinvigorate HMNs development.

Protection against tuberculosis achieved by dissolving microneedle patches loaded with live Mycobacterium paragordonae in a BCG prime-boost strategy

Introduction

Skin vaccination using dissolving microneedle patch (MNP) technology for transdermal delivery is a promising vaccine delivery strategy to overcome the limitations of the existing vaccine administration strategies using syringes. To improve the traditional microneedle mold fabrication technique, we introduced droplet extension (DEN) to reduce drug loss. Tuberculosis remains a major public health problem worldwide, and BCG revaccination had failed to increase the protective efficacy against tuberculosis. We developed an MNP with live Mycobacterium paragordonae (Mpg) (Mpg-MNP) as a candidate of tuberculosis booster vaccine in a heterologous prime-boost strategy to increase the BCG vaccine efficacy.

Materials and methods

The MNPs were fabricated by the DEN method on a polyvinyl alcohol mask film and hydrocolloid-adhesive sheet with microneedles composed of a mixture of mycobacteria and hyaluronic acid. We assessed the transdermal delivery efficiency by comparing the activation of the dermal immune system with that of subcutaneous injection. A BCG prime Mpg-MNP boost regimen was administered to a mouse model to evaluate the protective efficacy against M. tuberculosis.

Results

We demonstrated the successful transdermal delivery achieved by Mpg-MNP compared with that observed with BCG-MNP or subcutaneous vaccination via an increased abundance of MHCII-expressing Langerin+ cells within the dermis that could migrate into draining lymph nodes to induce T-cell activation. In a BCG prime-boost regimen, Mpg-MNP was more protective than BCG-only immunization or BCG-MNP boost, resulting in a lower bacterial burden in the lungs of mice infected with virulent M. tuberculosis. Mpg-MNP-boosted mice showed higher serum levels of IgG than BCG-MNP-boosted mice. Furthermore, Ag85B-specific T-cells were activated after BCG priming and Mpg-MNP boost, indicating increased production of Th1-related cytokines in response to M. tuberculosis challenge, which is correlated with enhanced protective efficacy.

Discussion

The MNP fabricated by the DEN method maintained the viability of Mpg and achieved effective release in the dermis. Our data demonstrate a potential application of Mpg-MNP as a booster vaccine to enhance the efficacy of BCG vaccination against M. tuberculosis. This study produced the first MNP loaded with nontuberculous mycobacteria (NTM) to be used as a heterologous booster vaccine with verified protective efficacy against M. tuberculosis.

Dissolving microneedle patches-mediated percutaneous delivery of tetramethylpyrazine for rheumatoid arthritis treatment

Recently, transdermal treatment of rheumatoid arthritis (RA) has received increasing attention due to the advantages of improving patient compliance and avoiding gastrointestinal side effects. However, the stratum corneum (SC) barrier limits the transdermal delivery of most substances. Therefore, we constructed tetramethylpyrazine-loaded dissolving microneedle patches (TMP-DMNPs) and investigated its anti-rheumatoid arthritis effect. The cone-shaped dissolving microneedle patch had complete, neatly arranged needles and great mechanical strength. It could effectively penetrate the stratum corneum when applied to the skin. In vitro transdermal experiment showed that DMNPs could significantly promote the transdermal penetration of TMP compared with TMP-cream. The needles were completely dissolved within 18 min and the applied skin recovered completely within 3 h. The excipients and blank DMNP had good safety and biocompatibility to human rheumatoid arthritis fibroblast synovial cells. To compare the therapeutic effects, the animal model was established. The experiments of paw swelling, histopathology and X-ray examination showed that dissolving microneedles significantly alleviated paw condition, reduced the serum concentrations of proinflammatory cytokines, and inhibited synovial tissue damage in AIA rats. These results indicate that the DMNPs we prepared can deliver TMP safely, effectively and conveniently, providing a basis for the percutaneous treatment of RA.

Silk Fibroin-Based Hydrogel Microneedles Deliver α-MSH to Promote Melanosome Delivery for Vitiligo Treatment

Microneedles have shown great advantages in subcutaneous drug delivery and skin disease treatment. Vitiligo is a difficult-to-cure skin disease characterized by the depigmentation of the epidermis. Melanosomes produced in melanocytes are transported through dendrites to adjacent keratinocytes, where they accumulate, resulting in skin pigmentation. However, melanocytes in vitiligo patients are functionally disrupted. Silk fibroin (SF) methacrylate hydrogel microneedle can deliver α-MSH to the epidermis directly, where α-MSH helps the protection of melanocytes, extension of melanocytic dendrites, and transfer of melanosomes. In addition, the expression of melanogenesis-related melanocyte-inducing transcription factor and tyrosinase-related protein 1 (TRP1) was up-regulated, and the number of hair follicle stem cells increased with good proliferative activity. This slow release α-MSH SF-based hydrogel microneedles provides a new idea for the treatment of vitiligo.

Biocontrol Microneedle Patch: A Promising Agent for Protecting Citrus Fruits from Postharvest Infection

With increasing human awareness of food safety, the replacement of highly toxic pesticides with biocompatible antimicrobials has become a trend. This study proposes a biocontrol microneedle (BMN) to expand the application of the food-grade preservative epsilon-poly-L-lysine (ε-PL) in fruit preservatives by utilizing a dissolving microneedle system. The macromolecular polymer ε-PL not only possesses broad-spectrum antimicrobial activity but also exhibits good mechanical properties. With the addition of a small amount of polyvinyl alcohol, the mechanical strength of the ε-PL-based microneedle patch could be further improved to achieve an enhanced failure force of needles at 1.6 N/needle and induce an approximately 96% insertion rate in citrus fruit pericarps. An ex vivo insertion test revealed that the microneedle tips could be effectively inserted into the citrus fruit pericarp, rapidly dissolve within 3 min, and produce inconspicuous needle holes. Moreover, the high drug loading capacity of BMN was observed to reach approximately 1890 μg/patch, which is essential for enhancing the concentration-dependent antifungal activity of ε-PL. The drug distribution study has confirmed the feasibility of mediating the local diffusion of EPL in the pericarp through BMN. Therefore, BMN has great potential to reduce the incidence of invasive fungal infections in local areas of citrus fruit pericarp.

Microneedle Device Delivering Aggregation-Induced Emission Photosensitizers for Enhanced Metronomic Photodynamic Therapy of Cancer

Metronomic photodynamic therapy (mPDT), which induces cancer cell death by prolonged intermittent continuous irradiation at lower light power, has profoundly promising applications. However, the photobleaching sensitivity of the photosensitizer (PS) and the difficulty of delivery pose barriers to the clinical application of mPDT. Here, we constructed a microneedle-based device (Microneedles@AIE PSs) that combined with aggregation-induced emission (AIE) PSs to achieve enhanced mPDT for cancer. Due to the strong anti-photobleaching property of the AIE PS, it can maintain superior photosensitivity even after long-time light exposure. The delivery of the AIE PS to the tumor through a microneedle device allows for greater uniformity and depth. This Microneedles@AIE PSs-based mPDT (M-mPDT) offers better treatment outcomes and easier access, and combining M-mPDT with surgery or immunotherapy can also significantly improve the effectiveness of these clinical therapies. In conclusion, M-mPDT offers a promising strategy for the clinical application of PDT due to its better efficacy and convenience.

Supramolecular Dissolving Microneedle Patch Loading Hydrophobic Glucocorticoid for Effective Psoriasis Treatment

Glucocorticoid-based creams are commonly used for treatments of psoriatic skin lesions while showing poor permeation because the thickened stratum corneum severely limits drug absorption. Although dissolving microneedle (DMN) patches have been employed in treating skin disease by virtue of their direct target to the lesion site, conventional DMN patches are generally fabricated from the water-soluble matrix, making them difficult to efficiently encapsulate hydrophobic glucocorticoids. Here, we develop a mechanically robust supramolecular DMN composed of hydroxypropyl β-cyclodextrin (HPCD) to effectively and uniformly load triamcinolone acetonide (TA). The TA-loaded HPCD DMN (TAMN) exhibits excellent mechanical performance that can easily pierce the thickened psoriasis lesions and deliver TA efficiently. Owing to the increased water solubility and bioavailability of TA after inclusion into HPCD, TAMN shows a superior in vitro inhibitory effect on immortalized human keratinocyte (HaCaT) cells. Importantly, the administration of TAMN twice a week effectively alleviates psoriatic signs and reduces the expression of Ki67, IL-23, and IL-17 in the ear lesions of imiquimod-induced psoriasis-like mice. This supramolecular DMN provides a promising strategy for the efficient treatment of psoriasis and other skin diseases, greatly broadens the applications of supramolecular materials in transdermal drug delivery, and widens the range of drugs in DMNs.

Use of 3D applicator for intranasal microneedle arrays for combinational therapy in migraine

The objective of current research work was to fabricate dissolving microneedles combining ergotamine and caffeine for synergistic action using controlled release kinetics with better permeability. The method of preparation for microneedles utilized multiple emulsion (w/o/w) approach by solvent-diffusion-evaporation process wherein the nano-emulsion of ergotamine and caffeine prepared using PLGA polymer and PVA as a stabilizer. The PLGA nanospheres were further loaded in polymer matrix of PVA and PVP K-90 and the final mixture poured in sterile silicon molds of microneedles. The PLGA nanospheres exhibited particle size in narrow range of 280.34 ± 6.61 to 416.0 ± 9.67 nm and good colloidal stability with negative zeta potential ranging between -19.08 ± 8.77 to -22.49 ± 8.09 mV. Higher entrapment efficiency (86.21 ± 4.52 %) for ergotamine and controlled release pattern (49.79 ± 4.16 % at 48 h) displayed by PLGA nanospheres. Similarly, the dissolving microneedles loaded with PLGA nanospheres showed controlled release pattern for in-vitro and ex-vivo drug release studies with 52.01 ± 5.71 % for ERM and 87.04 ± 2.44 % for CFE at 48 h whereas ex-vivo release studies illustrated similar results of 51.08 ± 3.56 % for ERM and 69.2 ± 2.16 % for CFE. The anti-hyperalgesic capability of microneedles was verified by the acetic acid writhing test, and the non-toxicity of synthetic microneedles was confirmed by histopathology and serotonin toxicity studies. The novel 3D applicator effectively delivered the microneedle array into the nasal cavity for systemic action. Therefore, the fabricated rapid dissolving microneedles combining two drugs ergotamine and caffeine with use of 3D applicator proved to be a coherent technique for intranasal delivery of ergotamine in the treatment of migraine.

Coating Methods of Carbon Nonwovens with Cross-Linked Hyaluronic Acid and Its Conjugates with BMP Fragments

The cross-linking of polysaccharides is a universal approach to affect their structure and physical properties. Both physical and chemical methods are used for this purpose. Although chemical cross-linking provides good thermal and mechanical stability for the final products, the compounds used as stabilizers can affect the integrity of the cross-linked substances or have toxic properties that limit the applicability of the final products. These risks might be mitigated by using physically cross-linked gels. In the present study, we attempted to obtain hybrid materials based on carbon nonwovens with a layer of cross-linked hyaluronan and peptides that are fragments of bone morphogenetic proteins (BMPs). A variety of cross-linking procedures and cross-linking agents (1,4-butanediamine, citric acid, and BDDE) were tested to find the most optimal method to coat the hydrophobic carbon nonwovens with a hydrophilic hyaluronic acid (HA) layer. Both the use of hyaluronic acid chemically modified with BMP fragments and a physical modification approach (layer-by-layer method) were proposed. The obtained hybrid materials were tested with the spectrometric (MALDI-TOF MS) and spectroscopic methods (IR and 1H-NMR). It was found that the chemical cross-linking of polysaccharides is an effective method for the deposition of a polar active substance on the surface of a hydrophobic carbon nonwoven fabric and that the final material is highly biocompatible.

Reactive Oxygen Species-Responsive Gel-Based Microneedle Patches for Prolonged and Intelligent Psoriasis Management

Psoriasis is an inflammatory skin disease. Microneedle (MN) patches can improve psoriasis treatment outcomes by increasing local drug content in the skin. As psoriasis frequently relapses, developing intelligent MN-based drug delivery systems with prolonged therapeutic drug levels and improved treatment efficiency is of great significance. Here, we designed detachable H₂O₂-responsive gel-based MN patches containing methotrexate (MTX) and epigallocatechin gallate (EGCG) by using EGCG as both cross-linkers for needle-composited materials and anti-inflammatory drugs. The gel-based MNs had dual-mode drug release kinetics, which quickly released MTX diffusively and sustainably released EGCG in an H₂O₂-responsive way. Compared with dissolving MNs, the gel-based MNs extended skin retention of EGCG, leading to prolonged reactive oxygen species (ROS) scavenging effects. The ROS-responsive MN patches that transdermally delivered antiproliferative and anti-inflammatory drugs improved treatment outcomes in both psoriasis-like and prophylactic psoriasis-like animal models.

Enhanced skin drug delivery using dissolving microneedles: a potential approach for the management of skin disorders

INTRODUCTION

For decades, finding effective long-term or disease-modifying treatments for skin disorders has been a major focus of scientists. The conventional drug delivery systems showed poor efficacy with high doses and are associated with side effects, which lead to challenges in adherence to therapy. Therefore, to overcome the limitations of conventional drug delivery systems, drug delivery research has focused on topical, transdermal, and intradermal drug delivery systems. Among all, the dissolving microneedles have gained attention with a new range of advantages of drug delivery in skin disorders such as breaching skin barriers with minimal discomfort and its simplicity of application to the skin, which allows patients to administer it themselves.

AREAS COVERED

This review highlighted the insights into dissolving microneedles for different skin disorders in detail. Additionally, it also provides evidence for its effective utilization in the treatment of various skin disorders. The clinical trial status and patents for dissolving microneedles for the management of skin disorders are also covered.

EXPERT OPINION

The current review on dissolving microneedles for skin drug delivery is accentuating the breakthroughs achieved so far in the management of skin disorders. The output of the discussed case studies anticipated that dissolving microneedles can be a novel drug delivery strategy for the long-term treatment of skin disorders.

Efficacy of stem cell secretome loaded in hyaluronate sponge for topical treatment of psoriasis

Psoriasis vulgaris is an inflammatory disease characterized by distinctive skin lesions and dysregulated angiogenesis. Recent research uses stem cell secretion products (CM); a set of bioactive factors with therapeutic properties that regulate several cellular processes, including tissue repair and angiogenesis. The aim of this work was to evaluate the effect of CM of Wharton's gelatin MSC (hWJCM) in a treatment based on the bioactivation of a hyaluronic acid matrix (HA hWJCM) in a psoriasiform-like dermatitis (PD) mouse model. A preclinical study was conducted on PD mice. The effect of hWJCM, Clobetasol (Clob) gold standard, HA Ctrl, and HA hWJCM was tested topically evaluating severity of PD, mice weight as well as skin, liver, and spleen appearance. Treatment with either hWJCM, HA Ctrl or HA hWJCM, resulted in significant improvement of the PD phenotype. Moreover, treatment with HA hWJCM reduced the Psoriasis Area Severity Index (PASI), aberrant angiogenesis, and discomfort associated with the disease, leading to total recovery of body weight. We suggest that the topical application of HA hWJCM can be an effective noninvasive therapeutic solution for psoriasis, in addition to other skin diseases, laying the groundwork for future studies in human patients.