Defectous UiO-66 MOF Nanocomposites as Reactive Media of Superior Protection against Toxic Vapors

Efficient internalization of nano architectured 177Lu-hyaluronic acid@ zirconium-based metal-organic framework for the treatment of neuroblastoma: Unravelling toxicity, stability, radiolabelling and bio-distribution

Zirconium-based metal-organic frameworks (UiO-66) have gained considerable attention owing to their versatile application. In the present research, UiO-66 was synthesized via a defect engineering approach, and its toxicity profile was explored. The synthesized nanomaterial was extensively characterized via spectroscopic methods such as FTIR and Raman spectroscopy, which confirmed the formation of the framework. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to determine the crystallinity, shape and size of the nanoformulations. Thermal gravimetric analysis, 1H NMR spectroscopy and Brunauer-Emmett-Teller (BET) surface area analysis were used to identify the differences between pristine and defective UiO-66. Furthermore, the synthesized MOF was exposed to various pH conditions, serum protein and DMEM. Drug loading and release studies were evaluated using 5-fluorouracil as a model anticancer drug. The synthesized MOFs were modified with hyaluronic acid via mussel-inspired polymerization to increase their uptake and stability. More importantly, the toxicity of the nanoformulation was investigated via various toxicity studies, such as hemolysis assays and cell viability assays, and was further supported by in vivo acute and subacute toxicity data obtained from Wistar rats. Radiolabelling and bio-distribution studies were also performed using 177Lu to explore the bio-distribution profile of UiO-66.

Benzene Oxidation in Air by an Amine-Functionalized Metal-Organic Framework-Derived Carbon- and Nitrogen-Loaded Zirconium Dioxide-Supported Platinum Catalyst

To learn more about the behavior of amine (NH2)-functionalized metal-organic framework (MOF)-derived noble metal catalysts in the removal of aromatic volatile organic compounds in air, benzene oxidation at low temperatures has been investigated using 0.2-, 0.8-, and 1.5%-platinum (Pt)/Universitetet i Oslo (UiO)-66-NH2. The benzene conversion (XB) of x%-Pt/UiO-66-NH2-R under dry conditions (175 °C) was 23% (x = 0.2%) < 52% (x = 0.8%) < 100% (x = 1.5%): 'R' suffix denotes reduction pretreatment using a hydrogen (10 vol %) and nitrogen mixture at 300 °C for the generation of metallic Pt (Pt0) sites and simultaneous partial MOF decomposition into carbon- and nitrogen-loaded zirconium dioxide. The prominent role of reduction pretreatment was apparent in benzene oxidation as 1.5%-Pt/UiO-66-NH2 did not exhibit catalytic activity below 175 °C (dry condition). The promotional role of moisture in benzene oxidation by 1.5%-Pt/UiO-66-NH2-R was evident with a rise in the steady-state reaction rate (r) at 110 °C (21 kPa molecular oxygen (O2)) from 1.3 × 10-3 to 5.0 × 10-3 μmol g-1 s-1 as the water (H2O) partial pressure increased from 0 to 1.88 kPa. In contrast, the activity was lowered with increasing RH due to catalyst poisoning by excess moisture (r (110 °C) of 6.6 × 10-04 μmol g-1 s-1 at 2.83 kPa H2O (21 kPa O2)). Kinetic modeling suggests that XB proceeds through the Langmuir-Hinshelwood mechanism on the Pt/UiO-66-NH2-R surface (dissociative O2 chemisorption and the involvement of two oxygen species in benzene oxidation). According to the density functional theory simulation, the carbon and nitrogen impurities are to make the first XB step (i.e., hydrogen migration from the benzene molecule to the substrate) energetically favorable. The second hydrogen atom from the benzene molecule is also extracted effectively, while the oxygen derived from O2 facilitates further XB. The Pt0 sites dissociate the O2 and H2O molecules, while the product of the latter, i.e., free hydrogen and hydroxyl, makes the subsequent XB steps energetically favorable.

Research Progress in the Degradation of Chemical Warfare Agent Simulants Using Metal-Organic Frameworks

Chemical warfare agents primarily comprise organophosphorus nerve agents, saliva alkaloids, cyanides, and mustard gas. Exposure to these agents can result in severe respiratory effects, including spasms, edema, and increased secretions leading to breathing difficulties and suffocation. Protecting public safety and national security from such threats has become an urgent priority. Porous metal-organic framework (MOF) materials have emerged as promising candidates for the degradation of chemical warfare agents due to their large surface area, tunable pore size distribution, and excellent catalytic performance. Furthermore, combining MOFs with polymers can enhance their elasticity and processability and improve their degradation performance. In this review, we summarize the literature of the past five years on MOF-based composite materials and their effectiveness in degrading chemical warfare agents. Moreover, we discuss key factors influencing their degradation efficiency, such as MOF structure, pore size, and functionalization strategies. Furthermore, we highlight recent developments in the design of MOF-polymer composites, which offer enhanced degradation performance and stability for practical applications in CWA degradation. These composite materials exhibit good performance in degrading chemical warfare agents, playing a crucial role in protecting public safety and maintaining national security. We can expect to see more breakthroughs in the application of metal-organic framework porous materials for degrading chemical warfare agents. It is hoped that these innovative materials will play a positive role in achieving social stability and security.

Dual-Mode Ce-MOF Nanozymes for Rapid and Selective Detection of Hydrogen Sulfide in Aquatic Products

Increasing concern over the safety of consumable products, particularly aquatic products, due to freshness issues, has become a pressing issue. Therefore, ensuring the quality and safety of aquatic products is paramount. To address this, a dual-mode colorimetric-fluorescence sensor utilizing Ce-MOF as a mimic peroxidase to detect H2S was developed. Ce-MOF was prepared by a conventional solvothermal synthesis method. Ce-MOF catalyzed the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by hydrogen peroxide (H2O2) to produce blue oxidized TMB (oxTMB). When dissolved, hydrogen sulfide (H2S) was present in the solution, and it inhibited the catalytic effect of Ce-MOF and caused the color of the solution to fade from blue to colorless. This change provided an intuitive indication for the detection of H2S. Through steady-state dynamic analysis, the working mechanism of this sensor was elucidated. The sensor exhibited pronounced color changes from blue to colorless, accompanied by a shift in fluorescence from none to light blue. Additionally, UV-vis absorption demonstrated a linear correlation with the H2S concentration, ranging from 200 to 2300 µM, with high sensitivity (limit of detection, LOD = 0.262 μM). Fluorescence intensity also showed a linear correlation, ranging from 16 to 320 µM, with high selectivity and sensitivity (LOD = 0.156 μM). These results underscore the sensor's effectiveness in detecting H2S. Furthermore, the sensor enhanced the accuracy of H2S detection and fulfilled the requirements for assessing food freshness and safety.

Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications

This comprehensive review explores the diverse applications of defective zirconium-based metal-organic frameworks (Zr-MOFs) in energy and environmental remediation. Zr-MOFs have gained significant attention due to their unique properties, and deliberate introduction of defects further enhances their functionality. The review encompasses several areas where defective Zr-MOFs exhibit promise, including environmental remediation, detoxification of chemical warfare agents, photocatalytic energy conversions, and electrochemical applications. Defects play a pivotal role by creating open sites within the framework, facilitating effective adsorption and remediation of pollutants. They also contribute to the catalytic activity of Zr-MOFs, enabling efficient energy conversion processes such as hydrogen production and CO2 reduction. The review underscores the importance of defect manipulation, including control over their distribution and type, to optimize the performance of Zr-MOFs. Through tailored defect engineering and precise selection of functional groups, researchers can enhance the selectivity and efficiency of Zr-MOFs for specific applications. Additionally, pore size manipulation influences the adsorption capacity and transport properties of Zr-MOFs, further expanding their potential in environmental remediation and energy conversion. Defective Zr-MOFs exhibit remarkable stability and synthetic versatility, making them suitable for diverse environmental conditions and allowing for the introduction of missing linkers, cluster defects, or post-synthetic modifications to precisely tailor their properties. Overall, this review highlights the promising prospects of defective Zr-MOFs in addressing energy and environmental challenges, positioning them as versatile tools for sustainable solutions and paving the way for advancements in various sectors toward a cleaner and more sustainable future.

Core-shell metal-organic framework/silica hybrid with tunable shell structure as stationary phase for high performance liquid chromatography

Metal-organic framework/silica composite (SSU) were prepared by growing UiO-66 on the amino-functionalized SiO2 core-shell spheres (SiO2@dSiO2) via a simple one-pot synthesis approach. By controlling the concentration of Zr4+, the obtained SSU have two different morphologies: spheres-on-sphere and layer-on-sphere. The spheres-on-sphere structure is formed by the aggregation of UiO-66 nanocrystals on the surface of SiO2@dSiO2 spheres. SSU-5 and SSU-20, which contain spheres-on-sphere composites have mesopores with a pore size of about 45 nm in addition to the characteristic micropores of UiO-66 with a pore size of 1 nm. In addition, UiO-66 nanocrystals were grown both inside and outside the pores of SiO2@dSiO2, resulting in a 27% loading of UiO-66 in the SSU. The layer-on-sphere is the surface of SiO2@dSiO2 covered with a layer of UiO-66 nanocrystals. SSU with this structure has only a characteristic pore size of about 1 nm belonging to UiO-66 and is therefore not suitable as a packed stationary phase for high performance liquid chromatography. The SSU spheres were packed into columns and tested for the separation of xylene isomers, aromatics, biomolecules, acidic and basic analytes. With both micropores and mesopores, SSU with spheres-on-sphere structure achieved baseline separation of both small and large molecules. Efficiencies up to 48,150, 50,452 and 41,318 plates m - 1 were achieved for m-xylene, p-xylene and o-xylene, respectively. The relative standard deviations of the retention times of anilines for run-to-run, day-to-day and column-to-column were all less than 6.1%. The results show that the SSU with spheres-on-sphere structure has great potential for high performance chromatographic separation.

Engineering linker defects in functionalized UiO-66 MOF nanoparticles for oil-in-water Pickering emulsion stabilization

Designing metal-organic framework (MOF)-based solid nanoparticles to stabilize Pickering emulsions by fine-tuning their hydrophobicity and lipophobicity is vital for essential applications and fundamental understanding. We demonstrate in situ grafting of palmitic acid in UiO-66 MOF through its linker defects. Our designed and activated nanoparticles (denoted as UP') stabilized the Pickering emulsions of n-heptane-in-water. Furthermore, we showed how UP' stabilized emulsion droplets disperse in media by covering each tiny droplet with a nanoscale layer made of UP'. To support our claim, we carried out the freeze-drying process to remove the liquid part from the emulsion, leaving behind the solid shell-like microstructures that we further characterized through several microscopic techniques. The stable n-heptane-in-water emulsion was confirmed by dilution (drop test), conductivity, zeta potential, and theoretical surface electrostatic potential measurements. Rheological studies indicate that the Pickering emulsions of n-heptane-in-water stabilized by UP' are much more resistant to deformation and flow imparting higher (mechanical) stability and shelf-life. Pickering emulsions stabilized by UP' emerged as a versatile way to design smart functional materials of UiO-66 through engineering linker defects that may have potential applications in interfacial catalysis, dye or contaminant separation, etc.

In Situ FTIR Spectroscopy for Scanning Accessible Active Sites in Defect-Engineered UiO-66

Three UiO-66 samples were prepared by solvothermal synthesis using the defect engineering approach with benzoic acid as a modulator. They were characterized by different techniques and their acidic properties were assessed by FTIR spectroscopy of adsorbed CO and CD₃CN. All samples evacuated at room temperature contained bridging μ₃-OH groups that interacted with both probe molecules. Evacuation at 250 °C leads to the dehydroxylation and disappearance of the μ₃-OH groups. Modulator-free synthesis resulted in a material with open Zr sites. They were detected by low-temperature CO adsorption on a sample evacuated at 200 °C and by CD₃CN even on a sample evacuated at RT. However, these sites were lacking in the two samples obtained with a modulator. IR and Raman spectra revealed that in these cases, the Zr⁴⁺ defect sites were saturated by benzoates, which prevented their interaction with probe molecules. Finally, the dehydroxylation of all samples produced another kind of bare Zr sites that did not interact with CO but formed complexes with acetonitrile, probably due to structural rearrangement. The results showed that FTIR spectroscopy is a powerful tool for investigating the presence and availability of acid sites in UiO-66, which is crucial for its application in adsorption and catalysis.

UiO-66-Derived PBA Composite as Multifunctional Electrochemical Non-Enzymatic Sensor Realizing High-Performance Detection of Hydrogen Peroxide and Glucose

In this work, a highly efficient multifunctional non-enzymatic electrochemical sensor is successfully fabricated based on a facile two-step synthetic strategy. It resolves two important challenges of poor stability and low reproducibility compared to conventional electrochemical enzyme-based sensors. Herein, a metal-organic framework (UiO-66) is selected as a sacrificial template to construct the corresponding Prussian blue analogue (PBA) target to improve its stability and conductivity, namely, PBA/UiO-66/NF. Target PBA/UiO-66/NF exhibits excellent electrochemical sensing performance as hydrogen peroxide (H₂O₂) and glucose sensors with ultrahigh sensitivity of up to 1903 μA mM^-1 cm^-2 for H₂O₂ and 22,800 μA mM^-1 cm^-2 for glucose, as well as a very low detection limit of 0.02 μM (S/N = 3) for H₂O₂ and 0.28 μM for glucose. Especially, extremely high stability can be observed, which will be beneficial for practical application.

Aramid nanofibers supported metal-organic framework aerogel for protection of chemical warfare agent

Protective fabrics containing Zr-Based Metal-Organic Frameworks (Zr-MOFs) show great potential in the detoxification of chemical warfare agents (CWAs). However, the current studies still face the challenges of complicated fabrication processes, limited MOF loading mass, and insufficient protection. Herein, we developed a lightweight, flexible and mechanical robust aerogel by in situ growth of UiO-66-NH₂ onto aramid nanofibers (ANFs) and assembly of UiO-66-NH₂ loaded ANFs (UiO-66-NH₂@ANFs) into 3D hierarchically porous architecture. The UiO-66-NH₂@ANF aerogels feature high MOF loading of 261 %, high surface area of 589.349 m² g^-1, open and interconnected cellular structure, which provide efficient transfer channels and promote catalytic degradation of CWAs. As a result, the UiO-66-NH₂@ANF aerogels demonstrate high 2-chloroethyl ethyl thioether (CEES) removal rate at 98.9 % and a short half-life of 8.15 min. Moreover, the aerogels present good mechanical stability (recovery rate of 93.3 % after 100 cycles under 30 % strain), low thermal conductivity (λ of 25.66 mW m^-1 K^-1), high flame resistance (LOI of 32 %) and good wearing comfortableness, indicating promising potential in multifunctional protection against CWAs.

Visual detection of vitamin C in fruits and vegetables using UiO-66 loaded Ce-MnO2 mimetic oxidase

A nanocomposite (UiO-66/Ce-MnO₂) was fabricated by combining UiO-66 with cerium-doped manganese dioxide (Ce-MnO₂) for colorimetric detecting vitamin C (Vc). Compared with traditional artificial enzymes, the as-synthesized UiO-66/Ce-MnO₂ were simple to prepare and did not require the participation of other active substances. The doping of cerium increased the oxygen vacancies and the UiO-66 as a carrier improved the dispersibility. The formation of superoxide anion (O₂^-) and the inside Ce⁴⁺/Ce³⁺ and Mn⁴⁺/Mn³⁺ redox couples of UiO-66/Ce-MnO₂ endowed UiO-66/Ce-MnO₂ with a high catalytic capability, which could catalytically oxidize 3, 3', 5, 5'-tetramethylbenzidine (TMB) into oxidation state TMB (oxTMB) without H₂O₂, accompanying with color change and a prominent peak at 652 nm in UV-vis spectra. Based on the inhibitory effects of Vc on catalytic oxidation of TMB, detection of Vc can be achieved, exhibiting a linear relationship in the concentration of 1.13-17.01 μmol L^-1 with a low detection limit of 65.82 nmol L^-1. This system can also be detected by smartphone, the linear detection range is 12.47-22.67 μmol L^-1. Vc contents in fruits and vegetables detected by the sensor were in good agreement with the 2, 4-Dinitrophenylhydrazine colorimetry method (P > 0.05), indicating a reliable sensor for Vc detection.

Ferrocene-modified Uio-66-NH2 hybrids with g-C3N4 as enhanced photocatalysts for degradation of bisphenol A under visible light

Designing graphitic carbon nitride (CN) based heterostructured photocatalysts with high catalytic activity is highly desired for peroxymonosulfate (PMS) activation to degrade organic pollutants from water. Herein, a novel heterostructured composite (U-F@CN) consisting of ferrocene-modified Uio-66-NH₂ (U-F) and CN was synthesized. The U-F@CN exhibited superior photocatalytic performance to degrade bisphenol A (BPA) in the presence of PMS under visible light. The experimental results indicated that BPA could be removed entirely by U-F@CN within 60 min under visible light irradiation. In addition, the outstanding photocatalytic activity could be maintained at high level in a wide pH range, appropriate temperature region and natural water condition. Benefiting from the good chemical stability, outstanding optical property and in-situ generation of interfacial heterojunction of U-F@CN, the interfacial transport of photogenerated charges could follow the Z-scheme mechanism, which can accelerate the charge separation and transport to yield abundant reactive active species (ROS) to efficiently active PMS and under visible light. This work provides a novel approach to design CN-based heterostructured photocatalysts with high stability and superior photocatalytic activity for environmental remediation.

Hydroxylation of UiO-66 Metal-Organic Frameworks for High Arsenic(III) Removal Efficiency

Zirconium clusters of UiO-66 have been hydroxylated with NaOH to generate strong binding sites for As(III) species in wastewater treatment. Hydroxylated UiO-66 provides high adsorption capacity over a wide range of pH from 1 to 10 with a maximum uptake of 204 mg g^-1, which is significantly enhanced compared to those of pristine UiO-66, acid-modulated UiO-66, and other adsorbents for use in a wide pH range of treatment processes. The local structure of hydroxylated sites and As(III) adsorption mechanism are determined by extended X-ray absorption fine structure combined with density functional theory calculations.

Carbon-Based Nanocatalysts (CnCs) for Biomass Valorization and Hazardous Organics Remediation

The continuous increase of the demand in merchandise and fuels augments the need of modern approaches for the mass-production of renewable chemicals derived from abundant feedstocks, like biomass, as well as for the water and soil remediation pollution resulting from the anthropogenic discharge of organic compounds. Towards these directions and within the concept of circular (bio)economy, the development of efficient and sustainable catalytic processes is of paramount importance. Within this context, the design of novel catalysts play a key role, with carbon-based nanocatalysts (CnCs) representing one of the most promising class of materials. In this review, a wide range of CnCs utilized for biomass valorization towards valuable chemicals production, and for environmental remediation applications are summarized and discussed. Emphasis is given in particular on the catalytic production of 5-hydroxymethylfurfural (5-HMF) from cellulose or starch-rich food waste, the hydrogenolysis of lignin towards high bio-oil yields enriched predominately in alkyl and oxygenated phenolic monomers, the photocatalytic, sonocatalytic or sonophotocatalytic selective partial oxidation of 5-HMF to 2,5-diformylfuran (DFF) and the decomposition of organic pollutants in aqueous matrixes. The carbonaceous materials were utilized as stand-alone catalysts or as supports of (nano)metals are various types of activated micro/mesoporous carbons, graphene/graphite and the chemically modified counterparts like graphite oxide and reduced graphite oxide, carbon nanotubes, carbon quantum dots, graphitic carbon nitride, and fullerenes.

Ultrafast Degradation and High Adsorption Capability of a Sulfur Mustard Simulant under Ambient Conditions Using Granular UiO-66-NH2 Metal-Organic Gels

Zirconium-based metal-organic frameworks (Zr-MOFs) have been considered as prospective materials for the degradation of nerve chemical warfare agents (CWAs) but show poor catalytic performance toward blister agents. Moreover, the powder issues and the poor adsorption capability also remain as the major challenges for the application of Zr-MOFs in practical CWA detoxification. Herein, a series of defected granular UiO-66-NH2 metal-organic gels are synthesized via adjusting the amount of added concentrated hydrochloric acid for the decontamination of 2-chloroethyl ethyl sulfide (2-CEES), a sulfur mustard simulant. The half-life of 2-CEES decontaminated by defected granular UiO-66-NH2 metal-organic gels can be shortened to 7.6 min, which is the highest reported value for MOFs under ambient conditions. The mechanism of decontamination is that the amino group on the linkers in UiO-66-NH2 MOGs undergoes a substitution reaction with 2-CEES to yield 2-(2-(ethylthio)ethylamino)terephthalic acid, which is less toxic and fixed in the frameworks. The recycling test corroborates that the granular UiO-66-NH2 xerogels possess good stability and reusability. Static adsorption and desorption tests show that UiO-66-NH2 xerogels possess a high 2-CEES vapor adsorption capacity of 802 mg/g after exposure for 1 d and only 28 wt % desorption capacity after air exposure for 7 d. The dual function of ultrafast degradation and high adsorption capability provide a firm foundation for using UiO-66-NH2 xerogels as a future protection media.

Photo-assisted enhancement performance for rapid detoxification of chemical warfare agent simulants over versatile ZnIn2S4/UiO-66-NH2 nanocomposite catalysts

Constructing versatile materials with self-detoxification properties are highly desired for emergency destruction of chemical warfare agents (CWAs). Herein, we first reported in-situ fabrication of ZnIn₂S₄/UiO-66-NH₂ nanocomposites (ZnInS/UiO) and their application in catalytic detoxification of two CWA simulants. For nerve agent simulant dimethyl 4-nitrophenyl phosphate (DMNP), the optimal ZnInS/UiO-23.9 displayed 5.9 times increase in hydrolysis rate having the turnover frequency (TOF) of 0.0586 s^-1 under simulated solar light (SSL), which is superior to the reported UiO-based catalysts. Photo-assisted enhancement in DMNP detoxification was due to photothermal effect of ZnInS and close interfacial contact in ZnInS/UiO heterostructures, facilitating instantaneous heat transfer from ZnInS to UiO catalytic sites. As for mustard gas surrogate 2-chloroethyl ethyl sulfide (CEES), under SSL irradiation for 15 min, ZnInS/UiO-23.9 can eliminate 96.7% of CEES in droplet experiment, being 4.17 and 3.24 times of ZnInS and UiO accordingly. It was ascribed to spatial separation of photoinduced electron-hole pairs and photothermally-assisted charge transfer in ZnInS/UiO composites, improving catalytic activity for CEES detoxification. Besides, the detected products suggested that CEES conversion underwent reductive dechlorination, radical reactions and hydrolysis. This study can be extended to other multifunctional catalysts based on metal-organic frameworks and provides new opportunities for photoassisted enhanced detoxification of CWAs.

UiO-66-NH2 Fabrics: Role of Trifluoroacetic Acid as a Modulator on MOF Uniform Coating on Electrospun Nanofibers and Efficient Decontamination of Chemical Warfare Agent Simulants

Protective fabrics with air-permeable and flexible features are crucial for practical application in the detoxification of chemical warfare agents (CWAs). Zr-based metal-organic frameworks (Zr-MOFs) are desirable to exhibit outstanding degradation toward CWAs. However, generally, MOFs with powders cannot afford the utilization as a protective layer directly; meanwhile, it is still a puzzling challenge to integrate MOFs with textiles efficiently. Herein, we develop a scalable and controllable strategy to fabricate UiO-66-NH₂ on electrospun polyacrylonitrile nanofibers (UiO-66-NH₂ fabrics) firmly and uniformly to capture and catalyze 2-chloroethyl ethyl sulfide (CEES) effectively for self-detoxification. The obtained UiO-66-NH₂ fabrics are greatly capable of specific surface area, ample porosity, excellent crystallinity, and abundant catalytic active sites. Consequently, CEES can be removed efficiently up to 97.7% after 48 h by reaction and adsorption. The degradation products mainly including ethyl-2-hydroxyethyl sulfide, ether, bis[2-(ethylthio)ethyl], and 2-(2-(ethylthio)ethylamino) terephthalic acid are detected. Moreover, the obtained nanofibrous fabrics possess air-permeable, washable, and flexible as well as lightweight merits, totally ensuring their promising engineering applications for protective clothing.

A multifunctional UiO-66@carbon interlayer as an efficacious suppressor of polysulfide shuttling for lithium-sulfur batteries

Restraining the shuttle effect in lithium-sulfur (Li-S) battery is crucial to realize its practical application. In this work, a UiO-66@carbon (UiO-66@CC) interlayer was developed for Li-S battery by growing a continuous UiO-66 film on carbon cloth. The continuous UiO-66 crystal layer contributes to provide sufficient adsorptive and catalytic sites for efficient adsorption and catalytic conversion towards polysulfides. Moreover, the hydrophilic property of UiO-66 material ensures the full infiltration of electrolyte and accelerates the transportation of lithium ions. Profiting from the above advantages of the proposed interlayer, the shuttle effect is effectively inhibited and a fast redox kinetic is also realized. Accordingly, the Li-S battery using UiO-66@CC delivers a specific capacity of 1228.9 mAh g^-1at 0.2 C with a nearly 100% capacity retention after 100 cycles, and the first specific capacity is 1033.1 mAh g^-1at 1.0 C with a decay rate of 0.07% over 600 cycles. Meanwhile, UiO-66@CC interlayer also has an excellent rate performance with a specific capacity of 535.9 mAh g^-1at 5.0 C and a high area capacity of 6.2 mAh cm^-2at increased sulfur loading (8.15 mg cm^-2).

Capture of Sulfur Mustard by Pillar[5]arene: From Host-Guest Complexation to Efficient Adsorption Using Nonporous Adaptive Crystals

Sulfur mustard (SM) has been the most frequently used chemical warfare agent. Here, we present the efficient containment of SM and its simulants by per-ethylated pillar[5]arene (EtP5). EtP5 exhibited strong binding abilities toward SM and its simulants not only in solution but also in the solid state. The association constant (Ka) between SM and EtP5 was determined as (6.2 ± 0.6) × 103 M-1 in o-xylene-d10. Single crystal structure of SM@EtP5 showed that a 1:1 inclusion complex was formed, which was driven by multiple C-H···π/Cl/S and S···π interactions. In addition, activated crystal materials of EtP5 (EtP5α) could effectively adsorb SM simulants at solid-vapor phase; powder X-ray diffraction patterns and host-guest crystal structures indicated that the uptake process triggered a solid-state structural transformation. More interestingly, the captured guest molecules could be stably contained in EtP5α for at least 6 months in air at room temperature.

Photocatalytic and Oxidative Synthetic Pathways for Highly Efficient PANI-TiO2 Nanocomposites as Organic and Inorganic Pollutant Sorbents

Polyaniline (PANI)-materials have recently been proposed for environmental remediation applications thanks to PANI stability and sorption properties. As an alternative to conventional PANI oxidative syntheses, which involve toxic carcinogenic compounds, an eco-friendly procedure was here adopted starting from benign reactants (aniline-dimer and H₂O₂) and initiated by ultraviolet (UV)-irradiated TiO₂. To unlock the full potential of this procedure, we investigated the roles of TiO₂ and H₂O₂ in the nanocomposites synthesis, with the aim of tailoring the properties of the final material to the desired application. The nanocomposites prepared by varying the TiO₂:H₂O₂:aniline-dimer molar ratios were characterized for their thermal, optical, morphological, structural and surface properties. The reaction mechanism was investigated via mass analyses and X-ray photoelectron spectroscopy. The nanocomposites were tested on both methyl orange and hexavalent chromium removal. A fast dye-sorption was achieved also in the presence of interferents and the recovery of the dye was obtained upon eco-friendly conditions. An efficient Cr(VI) abatement was obtained also after consecutive tests and without any regeneration treatment. The fine understanding of the reaction mechanism allowed us to interpret the pollutant-removal performances of the different materials, leading to tailored nanocomposites in terms of maximum sorption and reduction capability upon consecutive tests even in simulated drinking water.

Novel Approaches Utilizing Metal-Organic Framework Composites for the Extraction of Organic Compounds and Metal Traces from Fish and Seafood

The determination of organic and inorganic pollutants in fish samples is a complex and demanding process, due to their high protein and fat content. Various novel sorbents including graphene, graphene oxide, molecular imprinted polymers, carbon nanotubes and metal-organic frameworks (MOFs) have been reported for the extraction and preconcentration of a wide range of contaminants from fish tissue. MOFs are crystalline porous materials that are composed of metal ions or clusters coordinated with organic linkers. Those materials exhibit extraordinary properties including high surface area, tunable pore size as well as good thermal and chemical stability. Therefore, metal-organic frameworks have been recently used in many fields of analytical chemistry including sample pretreatment, fabrication of stationary phases and chiral separations. Various MOFs, and especially their composites or hybrids, have been successfully utilized for the sample preparation of fish samples for the determination of organic (i.e., antibiotics, antimicrobial compounds, polycyclic aromatic hydrocarbons, etc.) and inorganic pollutants (i.e., mercury, palladium, cadmium, lead, etc.) as such or after functionalization with organic compounds.

Extraction of Metal Ions with Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are crystalline porous materials composed of metal ions or clusters coordinated with organic linkers. Due to their extraordinary properties such as high porosity with homogeneous and tunable in size pores/cages, as well as high thermal and chemical stability, MOFs have gained attention in diverse analytical applications. MOFs have been coupled with a wide variety of extraction techniques including solid-phase extraction (SPE), dispersive solid-phase extraction (d-SPE), and magnetic solid-phase extraction (MSPE) for the extraction and preconcentration of metal ions from complex matrices. The low concentration levels of metal ions in real samples including food samples, environmental samples, and biological samples, as well as the increased number of potentially interfering ions, make the determination of trace levels of metal ions still challenging. A wide variety of MOF materials have been employed for the extraction of metals from sample matrices prior to their determination with spectrometric techniques.

Metal Organic Frameworks as Desulfurization Adsorbents of DBT and 4,6-DMDBT from Fuels

Ultradeep desulfurization of fuels is a method of enormous demand due to the generation of harmful compounds during the burning of sulfur-containing fuels, which are a major source of environmental pollution. Among the various desulfurization methods in application, adsorptive desulfurization (ADS) has low energy demand and is feasible to be employed at ambient conditions without the addition of chemicals. The most crucial factor for ADS application is the selection of the adsorbent, and, currently, a new family of porous materials, metal organic frameworks (MOFs), has proved to be very effective towards this direction. In the current review, applications of MOFs and their functionalized composites for ADS are presented and discussed, as well as the main desulfurization mechanisms reported for the removal of thiophenic compounds by various frameworks. Prospective methods regarding the further improvement of MOF's desulfurization capability are also suggested.