Constructing an Antibiofouling and Mineralizing Bioactive Tooth Surface to Protect against Decay and Promote Self-Healing

Targeted antimicrobial self-assembly peptide hydrogel with in situ bio-mimic remineralization for caries management

The single-function agents with wide-spectrum activity which tend to disturb the ecological balance of oral cavity cannot satisfy dental treatment need. A multi-functional agent with specifically targeted killing property and in situ remineralization is warranted for caries management. A novel multi-functional agent (8DSS-C8-P-113) consisting of three domains, i.e., a non-specific antimicrobial peptide (AMP) (P-113), a competence stimulating peptide (C8), and an enhancing remineralization domain (8DSS), is fabricated and evaluated in this study. The findings demonstrates that 2 μM mL-1 of 8DSS-C8-P-113 eliminates planktonic Streptococcus mutans (S. mutans) without disrupting the oral normal flora. At a concentration of 8 μM mL-1, it exhibits the ability to prevent S. mutans' adhesion. Furthermore, 8DSS-C8-P-113 self-assembles a hydrogel state at the higher concentration of 16 μM mL-1. This hydrogel self-adheres on the tooth surface, resisting acid attack, eradicating S. mutans' biofilm, and inducing mineralization in order to facilitate the repair of demineralized dental hard tissue. Its significant effectiveness in reducing the severity of dental caries is also demonstrated in vivo in a rat model. This study suggests that the multi-functional bioactive AMP 8DSS-C8-P-113 is a promising agent to specifically target pathogen, prevent tooth demineralization, and effectively induce in situ bio-mimic remineralization for the management of dental caries.

Layer-by-layer coated probiotics with tannic acid-Ca2+ and casein phosphopeptide complexes for caries prevention and enamel remineralization

Dental caries is a common disease resulting from tooth demineralization caused by bacterial plaque. Probiotics have shown great potential against caries by regulating the balance of oral flora. However, obstacles such as poor colonization and lysozyme sensitivity in oral cavity hinder their further application. In this study, an efficient layer-by-layer surface coating of tannic acid (TA)-Ca2+ and casein phosphopeptide (CPP) was applied to the probiotic Bifidobacterium infantis (BI) with potential anti-caries activity. Multi-functionalized probiotics thus prepared (called BI@TA-Ca2+@CPP) exhibited similar growth pattern, resistance to lysozyme and enhanced colonization potential. The ability of BI@TA-Ca2+@CPP in inhibiting cariogenic biofilm formation was improved. Moreover, BI@TA-Ca2+@CPP showed excellent remineralization efficacy. In a caries-induced rat model, BI@TA-Ca2+@CPP significantly prevented the occurrence and progression of tooth decay, meanwhile showing good biocompatibility. In summary, this study underlines the importance of probiotics coating in antibiofilm and remineralization activity as a promising strategy against dental caries.

Advances of Hydroxyapatite Nanoparticles in Dental Implant Applications

Hydroxyapatite nanoparticles (HANPs) are becoming increasingly crucial in dental implant applications as they are highly compatible with biological systems, actively support biological processes, and closely resemble bone minerals. This review covers the latest progress in how HANPs are made, studied, and used in dentistry. It looks at critical methods for creating HANPs, such as sol-gel, microwave hydrothermal synthesis, and biomimetic approaches, and how they affect the particles' size, structure, and activity. The green synthesis method illustrated a new door to synthesize HAp for maintaining biocompatibilityand increasing antibacterial properties. The review also explores how HANPs improve the integration of implants with bone, support bone growth, and help treat sensitive teeth based on various laboratory and clinical studies. The usage of HAp in dentin and enamel shows higher potentiality through FTIR, XPS, XRD, EDS, etc., for mechanical stability and biological balance compared to natural teeth. Additionally, the use of HANPs in dental products like toothpaste and mouthwash is discussed, highlighting its potential to help rebuild tooth enamel and fight bacteria. There are some challenges for long-term usage against oral bacteria, but doping with inorganic materials, like Zn, has already solved this periodontal problem. Much more research is still essential to estimate the fabrication variation based on patient problems and characteristics. Still, it has favorable outcomes regarding its bioactive nature and antimicrobial properties. Due to their compatibility with biological tissues and ability to support bone growth, HANPs hold great promise for advancing dental materials and implant technology, potentially leading to better dental care and patient outcomes.

An introduction to antibacterial materials in composite restorations

The longevity of direct esthetic restorations is severely compromised because of, among other things, a loss of function that comes from their susceptibility to biofilm-mediated secondary caries, with Streptococcus mutans being the most prevalent associated pathogen. Strategies to combat biofilms range from dental compounds that can disrupt multispecies biofilms in the oral cavity to approaches that specifically target caries-causing bacteria such as S mutans. One strategy is to include those antibacterial compounds directly in the material so they can be available long-term in the oral cavity and localized at the margin of the restorations, in which many of the failures initiate. Many antibacterial compounds have already been proposed for use in dental materials, including but not limited to phenolic compounds, antimicrobial peptides, quaternary ammonium compounds, and nanoparticles. In general, the goal of incorporating them directly into the material is to increase their availability in the oral cavity past the fleeting effect they would otherwise have in mouth rinses. This review focuses specifically on natural compounds, of which polyphenols are the most abundant category. The authors examined attempts at using these either as pretreatment or incorporated directly into restorative material as a step toward fulfilling a long-recognized need for restorations that can combat or prevent secondary caries formation. Repeatedly restoring failed restorations comes with the loss of more tooth structure along with increasingly complex and costly dental procedures, which is detrimental to not only oral health but also systemic health.

Self-assembled branched polypeptides as amelogenin mimics for enamel repair

The regeneration of demineralized enamel holds great significance in the treatment of dental caries. Amelogenin (Ame), an essential protein for mediating natural enamel growth, is no longer secreted after enamel has fully matured in childhood. Although biomimetic mineralization based on peptides or proteins has made significant progress, easily accessible, low-cost, biocompatible and highly effective Ame mimics are still lacking. Herein, we construct a series of amphiphilic branched polypeptides (CAMPs) by facile coupling of the Ame's C-terminal segment and poly(γ-benzyl-L-glutamate), which serves to simulate the Ame's hydrophobic N-terminal segment. Among them, CAMP15 is the best biomimetic mineralization template with great self-assembly performance to guide the oriented crystallization of hydroxyapatite and is capable of inhibiting the adhesion of Streptococcus mutans and Staphylococcus aureus on the enamel surfaces. This work highlights the potential application of amphiphilic branched polypeptide as Ame mimics in repairing defected enamel, providing a promising strategy for prevention and treatment of dental caries.

Chitosan Phytate Nanoparticles: A Synergistic Strategy for Effective Dental Caries Prevention

Dental caries is a widespread oral disease that poses a significant medical challenge. Traditional caries prevention methods, primarily the application of fluoride, often fall short in effectively destroying biofilms and preventing enamel demineralization, thereby providing limited efficacy in halting the progression of caries over time. To address this issue, we have developed a green and cost-effective synergistic strategy for the prevention of dental caries. By combining natural sodium phytate and chitosan, we have created chitosan-sodium phytate nanoparticles that offer both the antimicrobial properties of chitosan and the enamel demineralization-inhibiting capabilities of sodium phytate. In an ex vivo biofilm model of human teeth, we found that these nanoparticles effectively prevent biofilm buildup and acid damage to the mineralized tissue. Additionally, topical treatment of dental caries in rodent models has shown that these nanoparticles effectively suppress disease progression without negatively impacting oral microbiota diversity or causing harm to the gingival-mucosal tissues, unlike traditional prevention methods.

Polyelectrolyte-Cation Complexes Using PAsp-Sr Complexes Induce Biomimetic Mineralization with Antibacterial Ability

Remineralized dentin with an antibacterial ability is still a significant challenge in dentistry. Previously, a polyelectrolyte-calcium complexes pre-precursor (PCCP) process is proposed for rapid collagen mineralization. In the present study, the expansion concept of the PCCP process is explored by replacing the calcium with other cations, such as strontium. The results of transmission electron microscopy (TEM), 3D stochastic optical reconstruction microscopy, energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy, and high-resolution TEM with selected area electron diffraction demonstrate that biomimetic mineralization of collagen fibrils and demineralized dentin could be fulfilled with Sr&F-codoped hydroxyapatite (HAp) after they are treated with poly-aspartic acid-strontium (PAsp-Sr) suspension followed by a phosphate&fluoride solution. Moreover, dentin remineralized with Sr&F-codoped HAp exhibits in vitro and in vivo antibacterial ability against Streptococcus mutans. The cytotoxicity and oral mucosa irritation tests reveal excellent biocompatibility of mineralization mediums (PAsp-Sr suspension and phosphate&fluoride solution). The demineralized dentin's mechanical properties (elastic modulus and microhardness) could be restored almost to that of the intact dentin. Hence, the expansion concept of the PCCP process that replaces calcium ions with some cationic ions along with fluorine opens up new horizons for generating antibacterial remineralized dentin containing ions-doped HAp with excellent biocompatibility via biomimetic mineralization technology.

Tubular Nanoclay-Enhanced Calcium Phosphate Mineralization and Assembly to Impart High Stiffness and Antimicrobial Properties

Achieving superior mechanical properties of composite materials in artificially engineered materials is a great challenge due to technical bottlenecks in the size and morphological modulation of inorganic nanominerals. Hence, a "bioprocess-inspired fabrication" is proposed to create multilayered organic-inorganic columnar structures. The sequential assembly of halloysite nanotubes (HNTs), polyelectrolytes (PAAs), and calcium phosphates (CaPs) results in organic-inorganic structures. PAA plays a crucial role in controlling the formation of CaP, guiding it into amorphous particles with smaller nanosizes. The introduction of HNT induces the assembly and maturation of CaP-PAA, leading to the formation of a highly crystalline hydroxyapatite. Poly(vinyl alcohol) was then woven into HNT-encapsulated hydroxyapatite nanorods, resulting in composite materials with basic hierarchical structures across multiple scales. The fabricated composite exhibits exceptional hardness (4.27 ± 0.33 GPa) and flexural strength (101.25 ± 1.72 MPa), surpassing those of most previously developed biological hard tissue materials. Additionally, the composite demonstrates effective antibacterial properties and corrosion resistance, attributed to the dense crystalline phase of CaP. This innovative approach showcases the potential of clay minerals, particularly HNT, in the advancement of biomaterial design. The outstanding mechanical and antimicrobial properties of clay-based composites make them a promising candidate for applications in hard tissue repair, offering versatility in biomedicine and engineering.

Unveiling the mechanism of an amelogenin-derived peptide in promoting enamel biomimetic remineralization

Amelogenin and its derived peptides have exhibited excellent efficacy in promoting enamel biomimetic remineralization. However, little is known about their specific action mechanisms. Herein, by combining experiments and computer simulation, the mechanism of an amelogenin-derived peptide QP5 in regulating enamel biomimetic remineralization is unveiled for the first time. In experiments, peptide QP5 was separated into (QPX)5 and C-tail domains, the interactions of peptide-minerals in nucleation solution and the regulation of peptide on enamel biomimetic remineralization were explored. QP5 exhibited an unordered conformation when mineral ions existed, and it could adsorb on minerals through its two domains, thereby inhibiting spontaneous nucleation. The remineralized enamel regulated by C-tail showed better mechanical properties and formed more biomimetic crystals than that of (QPX)5, indicating the C-tail domain of QP5 played an important role in forming enamel-like crystals. The simulation results showed that the conformation of QP5 changed greatly, mainly exhibiting β-bend, β-turn, and coil structures, and it eventually adsorbed on enamel through negatively charged residues of the C-tail domain, then captured Ca2+ from solution to promote enamel remineralization. This study improved the evaluation methods of the mechanism of biomimetic peptides, and laid a theoretical basis for the amelioration and clinical transformation of peptide QP5.

Antimicrobial Peptides Targeting Streptococcus mutans: Current Research on Design, Screening and Efficacy

Antimicrobial peptides (AMPs) are small-molecule peptides that play a vital role in the nonspecific immune defense system of organisms. They mainly kill microorganisms by physically destroying the cell membrane and causing the leakage of contents. AMPs have attracted much attention as potential alternatives to antibiotics due to their low susceptibility to resistance. Streptococcus mutans (S. mutans) is one of the main causative agents of human dental caries. The design, screening, and efficacy evaluation of AMPs targeting S. mutans offer new possibilities for the prevention and treatment of oral diseases, especially dental caries, in the future. This article reviews AMPs from different sources that have inhibitory effects on S. mutans, discusses the mechanism of action of AMPs against S. mutans biofilms, and focuses on the research progress of screening methods, design modification, and biological activity evaluation of AMPs. We hope to provide insights and reference value for the development of new biologics.

Towards Polycaprolactone-Based Scaffolds for Alveolar Bone Tissue Engineering: A Biomimetic Approach in a 3D Printing Technique

The alveolar bone is a unique type of bone, and the goal of bone tissue engineering (BTE) is to develop methods to facilitate its regeneration. Currently, an emerging trend involves the fabrication of polycaprolactone (PCL)-based scaffolds using a three-dimensional (3D) printing technique to enhance an osteoconductive architecture. These scaffolds are further modified with hydroxyapatite (HA), type I collagen (CGI), or chitosan (CS) to impart high osteoinductive potential. In conjunction with cell therapy, these scaffolds may serve as an appealing alternative to bone autografts. This review discusses research gaps in the designing of 3D-printed PCL-based scaffolds from a biomimetic perspective. The article begins with a systematic analysis of biological mineralisation (biomineralisation) and ossification to optimise the scaffold's structural, mechanical, degradation, and surface properties. This scaffold-designing strategy lays the groundwork for developing a research pathway that spans fundamental principles such as molecular dynamics (MD) simulations and fabrication techniques. Ultimately, this paves the way for systematic in vitro and in vivo studies, leading to potential clinical applications.

New strategies and mechanisms for targeting Streptococcus mutans biofilm formation to prevent dental caries: A review

Dental caries, a prevalent oral infectious disease, is intricately linked to the biofilm formation on the tooth surfaces by oral microbes. Among these, Streptococcus mutans plays a central role in the initiation and progression of caries due to its ability to produce glucosyltransferases, synthesize extracellular polysaccharides, and facilitate bacterial adhesion and aggregation. This leads to the formation of biofilms where the bacteria metabolize dietary carbohydrates to produce acids. Therefore, devising effective strategies to inhibit S. mutans biofilm formation is crucial for dental caries prevention and oral health promotion. Though preventive measures like mechanical removal and antibacterial drugs (fluoride, chlorhexidine) exist, they pose challenges such as time consumption, short-term effectiveness, antibiotic resistance, and disruption of oral flora balance. This review provides a comprehensive overview of emerging strategies such as antimicrobial peptides, probiotics, nanoparticles, and non-thermal plasma therapies for targeted inhibition of S. mutans biofilm formation. Moreover, current research insights into the regulatory mechanisms governing S. mutans biofilm formation are also elucidated. The objective is to foster the development of innovative, efficient and safe techniques for caries prevention and treatment, thereby expanding treatment options in clinical dentistry and promoting oral health.

Rational Designs of Biomaterials for Combating Oral Biofilm Infections

Oral biofilms, which are also known as dental plaque, are the culprit of a wide range of oral diseases and systemic diseases, thus contributing to serious health risks. The manner of how to achieve good control of oral biofilms has been an increasing public concern. Novel antimicrobial biomaterials with highly controllable fabrication and functionalization have been proven to be promising candidates. However, previous reviews have generally emphasized the physicochemical properties, action mode, and application effectiveness of those biomaterials, whereas insufficient attention has been given to the design rationales tailored to different infection types and application scenarios. To offer guidance for better diversification and functionalization of anti-oral-biofilm biomaterials, this review details the up-to-date design rationales in three aspects: the core strategies in combating oral biofilm, as well as the biomaterials with advanced antibiofilm capacity and multiple functions based on the improvement or combination of the abovementioned antimicrobial strategies. Thereafter, insights on the existing challenges and future improvement of biomaterial-assisted oral biofilm treatments are proposed, hoping to provide a theoretical basis and reference for the subsequent design and application of antibiofilm biomaterials.

Mussel-Inspired Caries Management Strategy: Constructing a Tribioactive Tooth Surface with Remineralization, Antibiofilm, and Anti-inflammation Activity

Dental caries is a common chronic oral disease in humans resulting from tooth demineralization caused by acid production of bacterial plaque, which leads to the destruction of enamel and dentin and oral inflammation. However, it is still a challenge that the function of natural active ingredients in currently available oral care products is not comprehensive, especially the lack of remineralization. Here, inspired by the strong biological adhesion ability of mussels and ancient oral disease plant therapy, a multifunctional strategy is proposed to construct a bioactive tooth surface to treat dental caries. It has been demonstrated that the Turkish gall extract (TGE) can inhibit adhesion of cariogenic bacteria Streptococcus mutans and Actinomyces viscosus and destroy biofilms on the tooth surface. Meanwhile, TGE can reduce the expression of inflammatory factors. Notably, the TGE coating can induce the growth of hydroxyapatite (HAP) crystals in vivo and in vitro, recovering the enamel mechanical properties under normal oral conditions. MD simulations interpreted the adsorption mechanism by which the hydroxyl groups in TGE bind to phosphate group (PO₄^3-) on the tooth surface, attracting calcium ions (Ca²⁺) as nucleation sites for remineralization. This work underlines the importance of TGE coating in remineralization, antibiofilm, and anti-inflammation activity as a promising strategy for dental caries.

The remineralization effect of GERM CLEAN on early human enamel caries lesions in vitro

This study aimed to evaluate the remineralization effect of GERM CLEAN, a novel antibacterial peptide, on early enamel caries. Thirty human enamel blocks from thirty teeth were randomly divided into three groups: double distilled water (DDW group), GERM CLEAN (GC group), and 1000 ppm fluoride (NaF group). Specimens were demineralized for 3 days (pH 4.6) followed by pH cycling twice daily for 14 days. For a pH cycle, specimens received corresponding treatments for 5 min, then were immersed in demineralizing solution for 1 h, received corresponding treatments again, and finally were immersed in remineralizing solution (pH 7.0) for approximately 11 h. Specimens were washed with DDW after each treatment. Microindentation tests, atomic force microscopy (AFM), and transverse micro-radiography (TMR) were conducted to analyze enamel blocks. GC demonstrated a lower percentage of surface microhardness recovery (SMHR%) (p < 0.0001), rougher surfaces (p < 0.0001), deeper lesion depth (p = 0.001), and more mineral loss (p = 0.001) than NaF, but showed higher SMHR% (p < 0.0001), smoother surfaces (p < 0.0001), shallower lesion depth (p = 0.049), and less mineral loss (p = 0.001) than DDW. As a result, GERM CLEAN has the potential to promote the remineralization of demineralized enamel.

Peptide Designs for Use in Caries Management: A Systematic Review

The objective of this study was to review the design methods that have been used to create peptides for use in caries management. Two independent researchers systematically reviewed many in vitro studies in which peptides were designed for use in caries management. They assessed the risk of bias in the included studies. This review identified 3592 publications, of which 62 were selected. Forty-seven studies reported 57 antimicrobial peptides. Among them, 31 studies (66%, 31/47) used the template-based design method; 9 studies (19%, 9/47) used the conjugation method; and 7 studies (15%, 7/47) used other methods, such as the synthetic combinatorial technology method, the de novo design method and cyclisation. Ten studies reported mineralising peptides. Seven of these (70%, 7/10) used the template-based design method, two (20%, 2/10) used the de novo design method, and one study (10%, 1/10) used the conjugation method. In addition, five studies developed their own peptides with antimicrobial and mineralising properties. These studies used the conjugation method. Our assessment for the risk of bias in the 62 reviewed studies showed that 44 publications (71%, 44/62) had a medium risk and that 3 publications had a low risk (5%, 3/62). The two most common methods for developing peptides for use in caries management that were used in these studies were the template-based design method and the conjugation method.

A novel amelogenesis-inspired hydrogel composite for the remineralization of enamel non-cavitated lesions

Enamel non-cavitated lesions (NCLs) are subsurface enamel porosity from carious demineralization. The developed enamel cannot repair itself once NCLs occurs. The regeneration of mineral crystals in a biomimetic environment is an effective way to repair enamel subsurface defects. Previously, an amelogenin-derived peptide named QP5 was proven to repair demineralized enamel. In this work, inspired by amelogenesis, a novel biomimetic hydrogel composite containing the QP5 peptide and bioactive glass (BG) was designed, in which QP5 could promote enamel remineralization by guiding the calcium and phosphorus ions provided by BG. Also, BG could adjust the mineralization micro-environment to alkalinity, simulating the pH regulation of ameloblasts during enamel maturity. The BQ hydrogel composite showed biosafety and possessed capacity for enamel binding, ion release and pH buffering. Enamel NCLs treated with the BQ hydrogel composite showed a higher reduction in lesion depth and mineral loss both in vitro and in vivo. Moreover, compared to the hydrogels containing only BG or QP5, groups treated with the BQ hydrogel composite attained more surface microhardness recovery and color recovery, exhibiting resistance to erosion and abrasion of the remineralization layer. We envision that the BQ hydrogel composite can provide a biomimetic micro-environment to favor enamel remineralization, thus reducing the lesion depth and increasing the mineral content as a promising biomimetic material for enamel NCLs.

Growing Global Research Interest in Antimicrobial Peptides for Caries Management: A Bibliometric Analysis

Objective: Researchers are studying the use of antimicrobial peptides as functional biomaterials to prevent and treat dental caries. This study aims to investigate the global research interest in antimicrobial peptides for caries management. Methods: Two independent investigators systematically searched with keywords ('Caries' OR 'Dental caries') AND ('Antimicrobial peptide' OR 'AMP' OR 'Statherin' OR 'Histatin' OR 'Defensin' OR 'Cathelicidin') on Web of Science, PubMed and Scopus. They removed duplicate publications and screened the titles and abstracts to identify relevant publications. The included publications were summarized and classified as laboratory studies, clinical trials or reviews. The citation count and citation density of the three publication types were compared using a one-way analysis of variance. The publications' bibliometric data were analyzed using the Bibliometrix program. Results: This study included 163 publications with 115 laboratory studies (71%), 29 clinical trials (18%) and 19 reviews (11%). The number of publications per year have increased steadily since 2002. The citation densities (mean ± SD) of laboratory study publications (3.67 ± 2.73) and clinical trial publications (2.63 ± 1.85) were less than that of review articles (5.79 ± 1.27) (p = 0.002). The three publication types had no significant difference in citation count (p = 0.54). Most publications (79%, 129/163) reported the development of a novel antimicrobial peptide. China (52/163, 32%) and the US (29/163, 18%) contributed to 50% (81/163) of the publications. Conclusion: This bibliometric analysis identified an increasing trend in global interest in antimicrobial peptides for caries management since 2002. The main research topic was the development of novel antimicrobial peptides. Most publications were laboratory studies, as were the three publications with the highest citation counts. Laboratory studies had high citation counts, whereas reviews had high citation density.

Advanced materials for enamel remineralization

Dental caries, a chronic and irreversible disease caused by caries-causing bacteria, has been listed as one of the three major human diseases to be prevented and treated. Therefore, it is critical to effectively stop the development of enamel caries. Remineralization treatment can control the progression of caries by inhibiting and reversing enamel demineralization at an early stage. In this process, functional materials guide the deposition of minerals on the damaged enamel, and the structure and hardness of the enamel are then restored. These remineralization materials have great potential for clinical application. In this review, advanced materials for enamel remineralization were briefly summarized, furthermore, an outlook on the perspective of remineralization materials were addressed.

Evaluation of Enamel Acid Resistance and Whitening Effect of the CAP System

This study aimed to compare the effectiveness of a novel professional tooth-strengthening system and a conventional caries-prevention method that involved the use of high fluoride concentrations, to determine whether the system has a whitening effect. Bovine tooth-enamel samples were treated with fluoride gel (conventional APF method) or a mixture of citric acid gel, calcium phosphate (α-TCP), and fluoride gel, referred to as the CAP system; these treatments were performed to generate an acid-resistant layer on the enamel surface. For the evaluation of the acid resistance, a cyclic experiment, involving a 1-h remineralization and a 24-h acid treatment, was conducted thrice after the treatments. The height profiles were observed using a 3D-measuring laser microscope and the hardness was evaluated by Vickers hardness test. The morphological changes in the surface and cross-section of the enamel were observed by scanning electron microscopy. To evaluate the whitening effect, the enamel was ground until the color of the underlying dentin was recognizable; the CAP system was applied once, and the color change was measured using a color difference meter. As a result, it was confirmed that an acid-resistant layer was formed on the tooth surfaces treated with the CAP system, and a whitening effect was obtained.

Bio-inspired special wettability in oral antibacterial applications

Most oral diseases originate from biofilms whose formation is originated from the adhesion of salivary proteins and pioneer bacteria. Therefore, antimicrobial materials are mainly based on bactericidal methods, most of which have drug resistance and toxicity. Natural antifouling surfaces inspire new antibacterial strategies. The super wettable surfaces of lotus leaves and fish scales prompt design of biomimetic oral materials covered or mixed with super wettable materials to prevent adhesion. Bioinspired slippery surfaces come from pitcher plants, whose porous surfaces are infiltrated with lubricating liquid to form superhydrophobic surfaces to reduce the contact with liquids. It is believed that these new methods could provide promising directions for oral antimicrobial practice, improving antimicrobial efficacy.

Zwitterionic/phosphonate copolymer coatings endow excellent antifouling properties and robust re-mineralization ability of dentine substrates

Inhibition of biofilm formation and induction of the re-mineralization of damaged dental tissues are two major strategies to combat dental hypersensitivity (DH). However, single component synthetic materials normally cannot fulfil these two functions during the repairing of damaged dental tissues. Here, we report zwitterionic phosphorylcholine based polymers to be a new type of dual functional coating for the repairing of DH. Zwitterionic/phosphonate copolymers, p(DEMMP-co-MPC), bearing varied zwitterionic contents (95 and 75 mol%) were prepared through conventional radical copolymerization. ¹H NMR spectroscopy clearly indicated the precise preparation of the copolymers. The copolymers can be easily coated on dentine substrates based on the high affinity between the phosphonate group and the calcium phosphate minerals of the dentine substrates, as evidenced by XPS and water contact angle measurements. Antifouling evaluations indicated that zwitterionic coating can efficiently inhibit protein adsorption (BSA, egg white, and milk, by 85%) and bacterial adhesion (by 97.1%) on dentine substrates. Furthermore, in vitro and in vivo experiments consistently indicated that the zwitterionic coating could not only induce the robust re-mineralization of dentine surfaces, but also template the extensive re-mineralization of dentine tubules to a similar level of pristine dentine. Both the antifouling properties and the re-mineralization potency are positively correlated with the content of zwitterionic pMPC in the coating copolymer. These findings may provide the zwitterionic phosphorylcholine based materials to be a promising candidate to treat dental hypersensitivity and other related dental diseases.

Childhood Caries Management

Dental caries, also known as tooth decay or cavities, result from the breakdown of teeth due to bacterial acids [...]

Efficient Antimicrobial Effect of Alginate-Catechol/Fe2+ Coating on Hydroxyapatite toward Oral Care Application

Reducing the formation of oral bacterial biofilms is critical to prevent common dental diseases. Though many strategies for restricting bacterial adhesion on tooth surfaces have been reported, a simple method for efficient oral bacteriostasis is still highly expected. Herein, we have proved a soft gel made of an alginate-catechol conjugate (SA-DA) and the ferrous cation (Fe²⁺) as an effective antibacterial coating on hydroxyapatite (HAP, a tooth model). As suggested by quartz crystal microbalance (QCM) measurements, SA-DA/Fe²⁺ coating possessed a high binding affinity to HAP without destruction by either immersion in artificial saliva or simulated tooth brushing. Significantly less protein (bovine serum albumin) and Streptococcus mutans (S. mutans, an oral bacterial model) could be found on HAP after coating with SA-DA/Fe²⁺, indicating that the prepared gel could resist well the adhesion of biofouling and microbes due to its hydrophilicity. Notably, such an antibacterial effect (around 70% S. mutans was inhibited) could be maintained for 3 d, which resulted from the extremely good stability of SA-DA/Fe²⁺ coating, as confirmed by QCM analysis. Our results may offer possibilities for developing applications in order to further improve oral hygiene.

Cell-Free Biomimetic Mineralization Strategies to Regenerate the Enamel Microstructure

The distinct architecture of native enamel gives it its exquisite appearance and excellent intrinsic-extrinsic fracture toughening properties. However, damage to the enamel is irreversible. At present, the clinical treatment for enamel lesion is an invasive method; besides, its limitations, caused by the chemical and physical difference between restorative materials and dental hard tissue, makes the restorative effects far from ideal. With more investigations on the mechanism of amelogenesis, biomimetic mineralization techniques for enamel regeneration have been well developed, which hold great promise as a non-invasive strategy for enamel restoration. This review disclosed the chemical and physical mechanism of amelogenesis; meanwhile, it overviewed and summarized studies involving the regeneration of enamel microstructure in cell-free biomineralization approaches, which could bring new prospects for resolving the challenges in enamel regeneration.

The Amelogenin-Derived Peptide TVH-19 Promotes Dentinal Tubule Occlusion and Mineralization

In this study, the amelogenin-derived peptide, TVH-19, which has been confirmed to promote mineralization, was evaluated to derive its potential to induce dentinal tubule occlusion. The binding capability of fluorescein isothiocyanate (FITC)-labeled TVH-19 to the demineralized dentin surface was analyzed by confocal laser scanning microscopy (CLSM). Additionally, the sealing function of the peptide was studied through the remineralization of demineralized dentin in vitro. The adsorption results showed that TVH-19 could bind to the hydroxyapatite and demineralized dentin surfaces, especially to periodontal dentin. Scanning electron microscopy analysis further revealed that TVH-19 created mineral precipitates. The plugging rate in the TVH-19 group was higher than that in the PBS group. Moreover, energy-dispersive X-ray spectroscopy (EDX) results indicated that the calcium/phosphorus (Ca/P) ratio of the new minerals induced by TVH-19 was close to that of the hydroxyapatite. Attenuated total internal reflection-Fourier transform infrared (ATR-FTIR) spectrometry and X-ray diffraction (XRD) results indicated that the hydroxyapatite crystals formed via remineralization elongated the axial growth and closely resembled the natural dentin components. These findings indicate that TVH-19 can effectively promote dentin sealing by binding to the periodontal dentin, promoting mineral deposition, and reducing the space between the dentin tubules.

Functional biomedical materials derived from proteins in the acquired salivary pellicle

In the oral environment, the acquired salivary pellicle (ASP) on the tooth surface comprises proteins, glycoproteins, carbohydrates, and lipids. The ASP can specifically and rapidly adsorb on the enamel surface to provide effective lubrication, protection, hydration, and remineralisation, as well as be recognised by various bacteria to form a microbial biofilm (plaque). The involved proteins, particularly various phosphoproteins such as statherins, histatins, and proline-rich proteins, are vital to their specific functions. This review first describes the relationship between the biological functions of these proteins and their structures. Subsequently, recent advances in functional biomedical materials derived from these proteins are reviewed in terms of dental/bone therapeutic materials, antibacterial materials, tissue engineering materials, and coatings for medical devices. Finally, perspectives and challenges regarding the rational design and biomedical applications of ASP-derived materials are discussed.

Photothermal-Enhanced Fenton-like Catalytic Activity of Oxygen-Deficient Nanotitania for Efficient and Safe Tooth Whitening

The growing demand for charming smiles has led to the popularization of tooth bleaching procedures. Current tooth bleaching products with high-concentration hydrogen peroxide (HP, 30-40%) are effective but detrimental due to the increased risk of enamel destruction, tooth sensitivity, and gingival irritation. Herein, we reported a less-destructive and efficient tooth whitening strategy with a low-concentration HP, which was realized by the remarkably enhanced Fenton-like catalytic activity of oxygen-deficient TiO₂ (TiO_2-x). TiO_2-x nanoparticles were synthesized with a modified solid-state chemical reduction approach with NaBH₄. The Fenton-like activity of TiO_2-x was optimized by manipulating oxygen vacancy (OV) concentration and further promoted by the near-infrared (NIR)-induced photothermal effect of TiO_2-x. The TiO_2-x sample named BT45 was chosen due to the highest methylene blue (MB) adsorption ability and Fenton-like activity among acquired samples. The photothermal property of BT45 under 808 nm NIR irradiation was verified and its enhancement on Fenton-like activity was also studied. The BT45/HP + NIR group performed significantly better in tooth whitening than the HP + NIR group on various discolored teeth (stained by Orange II, tea, or rhodamine B). Excitingly, the same tooth whitening performance as the Opalescence Boost, a tooth bleaching product containing 40% HP, was obtained by a self-produced bleaching gel based on this novel system containing 12% HP. Besides, negligible enamel destruction, safe temperature range, and good cytocompatibility of TiO_2-x nanoparticles also demonstrated the safety of this tooth bleaching strategy. This work indicated that the photothermal-enhanced Fenton-like performance of the TiO_2-x-based system is highly promising in tooth bleaching application and can also be extended to other biomedical applications.

A Novel Strategy for Caries Management: Constructing an Antibiofouling and Mineralizing Dual-Bioactive Tooth Surface

Existing single-functional agents against dental caries are inadequate in antibacterial performance or mineralization balance. This problem can be resolved through a novel strategy, namely, the construction of an antibiofouling and mineralizing dual-bioactive tooth surface by grafting a dentotropic moiety to an antimicrobial peptide. The constructed bioactive peptide can strongly adsorb onto the tooth surface and has beneficial functions in a myriad of ways. It inhibits cariogenic bacteria Streptococcus mutans adhesion, kills planktonic S. mutans, and destroys the S. mutans biofilm on the tooth surface. It also protects teeth from demineralization in acidic environments, and induces self-healing regeneration in the remineralization environment. Molecular dynamics simulations elucidate the main adsorption mechanism that the positively charged amino acid residues in the bioactive peptide bind to phosphate groups on the tooth surface, and the main mineralization mechanism that the negative charges on the outermost layer of the bioactive peptide repel acetic acid ions and attract calcium ions as nucleation sites for remineralization. This study suggests that this in-house synthesized dual-bioactive peptide is a promising functional agent to prevent dental caries, and is effective in inducing in situ self-healing remineralization for the treatment of decayed teeth.

Remineralising dentine caries using an artificial antimicrobial peptide: An in vitro study

OBJECTIVE

To investigate the antibacterial and remineralising effects of a novel dual-action antimicrobial peptide, GA-KR12, on artificial dentine caries.

METHODS

Human dentine blocks with artificial carious lesions were allocated to two groups - Group 1: dentine blocks treated with the novel antimicrobial peptide GA-KR12 twice daily; Group 2: dentine blocks received water as the negative control. Two groups underwent Streptococcus mutan biofilm-remineralisation cycles at 37 °C for 7 days. The morphology, viability and growth kinetics of the S. mutans biofilm were evaluated by scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM) and colony-forming unit (CFU) counting, respectively. The dentine blocks' lesion depths and mineral loss, changes in chemical structure, dentine surface morphology and crystal characteristics were determined using micro-computed tomography, Fourier transform infrared (FTIR), SEM and X-ray diffraction (XRD), respectively.

RESULTS

The surface of the dentine blocks in Group 1 was partially covered by S. mutans with damaged cell structure. Group 2 showed affluent growth of S. mutans covering the dentine surface when compared to Group 1. The dead-to-live ratio of Group 1 and Group 2 were 0.78 ± 0.01 and 0.47 ± 0.08, respectively (p < 0.001). The Log CFUs of Group 1 and Group 2 were 7.14 ± 0.30 and 8.24 ± 0.20, respectively (p < 0.001). The lesion depths of Group 1 and Group 2 were 109 ± 1 µm and 135 ± 3 µm, respectively (p < 0.001). The mineral loss of Group 1 and Group 2 were 0.59 ± 0.08 gHApcm^-3 and 0.81 ± 0.07 gHApcm^-3, respectively (p < 0.001). FTIR showed the amide I-to-hydrogen phosphate (HPO₄^2-) ratios of Group 1 and Group 2 were 0.25 ± 0.05 and 0.39 ± 0.05 (p < 0.001), respectively. SEM images showed Group 1 had less exposed dentine collagen fibres than Group 2. The XRD revealed that the hydroxyapatite in Group 1 was well crystalised.

CONCLUSION

This study demonstrated that the novel antimicrobial peptide GA-KR12 inhibited the growth of S. mutans biofilm and enhanced the remineralisation of artificial dentine caries.

A novel anticaries agent, honokiol-loaded poly(amido amine) dendrimer, for simultaneous long-term antibacterial treatment and remineralization of demineralized enamel

OBJECTIVE

Existing agents to induce enamel self-repair and inhibit the progression of dental caries in the early stage have been proven to be inadequate and far from satisfactory. In this study, a honokiol-loaded poly(amido amine) (PAMAM) dendrimer (PAMH) was constructed to combat early caries lesions in enamel.

METHODS

PAMH was prepared via a codissolution method. Computational simulation analysis was used to explore the mechanism of honokiol release. The cytotoxicity of PAMH was tested. The antibacterial effects of PAMH were tested by planktonic growth assays and biofilm formation inhibition assays. The remineralization effect of PAMH was examined via transverse microradiography and scanning electron microscopy after a pH cycling model. The in vivo anti-caries effect of PAMH was carried out in a rat model.

RESULTS

Honokiol released from PAMH was slower but more durable in a cariogenic pH environment than in a neutral pH environment, which could be explained through the computational simulation analysis results. Under electrostatic action, P3 beads with the same charge repelled each other and extended outwards, resulting in the rapid expansion of the PAMAM dendrimer and accelerating the release of the drug. At a low pH of 5.5, the protonated P3 beads were not charged and the protonated P1 beads were positively charged. However, the electrostatic repulsive interaction between protonated P1 beads was restricted by the P3 beads in the outermost layer of the PAMAM dendrimer, so the swelling rate was relatively slow, resulting in the slow release of drug molecules in the acidic environment. The cytotoxicity demonstration and the biocompatibility experiment in animal study showed that PAMH is biologically safe. PAMH showed excellent enamel remineralizing ability after pH cycling and showed a long-term antibacterial effect in vitro. Meanwhile, PAMH showed long-term anticaries efficacy in vivo.

SIGNIFICANCE

Our findings indicated that PAMH had great potential to combat early caries lesions in enamel for future clinical application.

Recent Advances in the Development of Antimicrobial and Antifouling Biocompatible Materials for Dental Applications

The risk of secondary bacterial infections resulting from dental procedures has driven the design of antimicrobial and antifouling dental materials to curb pathogenic microbial growth, biofilm formation and subsequent oral and dental diseases. Studies have investigated approaches based primarily on contact-killing or release-killing materials. These materials are designed for addition into dental resins, adhesives and fillings or as immobilized coatings on tooth surfaces, titanium implants and dental prosthetics. This review discusses the recent developments in the different classes of biomaterials for antimicrobial and antifouling dental applications: polymeric drug-releasing materials, polymeric and metallic nanoparticles, polymeric biocides and antimicrobial peptides. With modifications to improve cytotoxicity and mechanical properties, contact-killing and anti-adhesion materials show potential for incorporation into dental materials for long-term clinical use as opposed to short-lived antimicrobial release-based coatings. However, extended durations of biocompatibility testing, and adjustment of essential biomaterial features to enhance material longevity in the oral cavity require further investigations to confirm suitability and safety of these materials in the clinical setting. The continuous exposure of dental restorative and regenerative materials to pathogenic microbes necessitates the implementation of antimicrobial and antifouling materials to either replace antibiotics or improve its rational use, especially in the day and age of the ever-increasing problem of antimicrobial resistance.

Current status and future of delivery systems for prevention and treatment of infections in the oral cavity

Oral health reflects the general health, and it is fundamental to well-being and quality of life. An infection in the oral cavity can be associated with serious complications in human health. Local therapy of these infections offers many advantages over systemic drug administration, targeting directly to the diseased area while minimizing systemic side effects. Specialized drug delivery systems into the oral cavity have to be designed in such a fashion that they resist to the aqueous environment that is constantly bathed in saliva and subject to mechanical forces. Additionally, a prolonged release of drug should also be provided, which would enhance the efficacy and also decrease the repeated dosing. This review is aimed to summarize the current most relevant findings related to local drug delivery of various drug groups for prevention and treatment of infections (viral, bacterial, fungal) and infection-related manifestations in the oral cavity. Current therapeutic challenges in regard to effective local drug delivery systems will be discussed, and the recent approaches to overcome these obstacles will be reviewed. Finally, future prospects will be overviewed to promote novel strategies that can be implemented in clinical management for prevention and treatment of oral infections.

Antimicrobial peptides for the prevention and treatment of dental caries: A concise review

The objective of this study was to perform a comprehensive review of the use of antimicrobial peptides for the prevention and treatment of dental caries. The study included publications in the English language that addressed the use of antimicrobial peptides in the prevention and treatment of caries. These publications were also searchable on PubMed, Web of Science, Embase, Scopus, the Collection of Anti-Microbial Peptides and the Antimicrobial Peptide Database. A total of 3,436 publications were identified, and 67 publications were included. Eight publications reported seven natural human antimicrobial peptides as bactericidal to Streptococcus mutans. Fifty-nine publications reported 43 synthetic antimicrobial peptides developed to mimic natural antimicrobial peptides, fusing peptides with functional sequences and implementing new designs. The 43 synthetic antimicrobial peptides were effective against Streptococcus mutans, and nine peptides specifically targeted Streptococcus mutans. Ten antimicrobial peptides had an affinity for hydroxyapatite to prevent bacterial adhesion. Six antimicrobial peptides were also antifungal. Four antimicrobial peptides promoted remineralisation or prevented the demineralisation of teeth by binding calcium to hydroxyapatite. In conclusion, this study identified 67 works in the literature that reported seven natural and 43 synthetic antimicrobial peptides for the prevention and treatment of caries. Most of the antimicrobial peptides were bactericidal, and some prevented bacterial adhesion. A few antimicrobial peptides displayed remineralising properties with hydroxyapatite.

Anti-Biofouling Coatings on the Tooth Surface and Hydroxyapatite

Dental plaque is one type of biofouling on the tooth surface that consists of a diverse population of microorganisms and extracellular matrix and causes oral diseases and even systematic diseases. Numerous studies have focused on preventing bacteria and proteins on tooth surfaces, especially with anti-biofouling coatings. Anti-biofouling coatings can be stable and sustainable over the long term on the tooth surface in the complex oral environment. In this review, numerous anti-biofouling coatings on the tooth surface and hydroxyapatite (as the main component of dental hard tissue) were summarized based on their mechanisms, which include three major strategies: antiprotein and antibacterial adhesion through chemical modification, contact killing through the modification of antimicrobial agents, and antibacterial agent release. The first strategy of coatings can resist the adsorption of proteins and bacteria. However, these coatings use passive strategies and cannot kill bacteria. The second strategy can interact with the cell membrane of bacteria to cause bacterial death. Due to the possibility of delivering a high antibacterial agent concentration locally, the third strategy is recommended and will be the trend of local drug use in dentistry in the future.