Near-Infrared Lanthanide-Doped Nanoparticles for a Low Interference Lateral Flow Immunoassay Test

Effect of Pr3+concentration in luminescence properties & upconversion mechanism of triple doped NaYF4: Yb3+, Er3+, Pr3

Lanthanide-doped fluoride nanocrystals (NCs) exhibit excellent optical features, including upconversion and downconversion luminescence (UCL and DCL), that can be utilized in a variety of applications. In this study, we have successfully demonstrated the photoluminescence behavior of triple-doped NaYF4: Yb3+, Er3+, Pr3+NCs in the Vis-NIR region. Herein, highly monodisperse hexagonal phase NaYF4: Yb0.2, Er0.02, Prxnanocrystals in various Pr3+(x = 0, 0.1, 0.5, and 1 mol %) concentration with ∼22 nm diameter synthesized by thermal decomposition technique. The photoluminescence studies for all samples were performed under 980 nm laser excitation. The luminescence intensity of Er3+including blue (407 nm), green (520 and 540 nm), red (654 nm), and near-infrared (845 nm and 1530 nm) emissions was significantly quenched and Pr3+emission intensity at 1290 nm (Pr3+:1G4→3H5) changes irregularly upon doping with Pr3+ions. Furthermore, we performed the excitation power dependence and decay time analysis to investigate the energy transfer and upconversion mechanisms of samples. These findings indicate that the presence of praseodymium strongly reduces emission intensities due to abundant cross-relaxation channels. In addition, particle size is an efficient factor, shedding light on the influence of Pr3+on the energy transfer and upconversion mechanisms of the fluorides.

Improvement of the sensitivity of lateral flow systems for detecting mycotoxins: Up-to-date strategies and future perspectives

Mycotoxins are dangerous human and animal health-threatening secondary fungal metabolites that can be found in various food and agricultural products. Several countries have established regulations to restrict their presence in food and agricultural products destined for human and animal consumption. Consequently, the need to develop highly sensitive and smart detection systems was recognized worldwide. Lateral flow assay possesses the advantages of easy operation, rapidity, stability, accuracy, and specificity, and it plays an important role in the detection of mycotoxins. Nevertheless, strategies to comprehensively improve the sensitivity of lateral flow assay to mycotoxins in food have rarely been highlighted and discussed. In this article, a comprehensive overview was presented on the application of lateral flow assay in mycotoxin detection in food samples by highlighting the principle of lateral flow assay, presenting a detailed discussion on various analytical performance-improvement strategies, such as the development of high-affinity recognition reagents, immunogen immobilization methods, and signal amplification. Additionally, a detailed discussion on the various signal analyzers and interpretation approaches was provided. Finally, current hurdles and future perspectives on the application of lateral flow assay in the detection of mycotoxins were discussed.

NIR-II fluorescent Ag2Se polystyrene beads in a lateral flow immunoassay to detect biomarkers for breast cancer

Fluorescent lateral flow immunoassay (LFA), one tool in point of care testing (POCT) systems for breast cancer, has attracted attention because it is quick, simple, and convenient. However, samples and the constituent material exhibit autofluorescence in the visible region, which is a very large obstacle in the development of fluorescent LFAs. The autofluorescence of biological samples is scarcely found in the second near-infrared (NIR-II) range and samples scatter and absorb less NIR-II light than visible light. Here, we report an NIR-II QD-LFA platform using the NIR-II fluorescent Ag2Se quantum dots (QDs) with 1020 nm emission encapsulated into polystyrene beads as fluorescent probes. The NIR-II LFA platform was established to detect breast cancer tumour markers (CEA and CA153) within 15 min with a low limit of detection (CEA: 0.768 ng mL-1, CA153: 1.192 U mL-1), high recoveries (93.7% ~ 108.8%), and relative standard deviations (RSDs) of less than 10%. This study demonstrated the potential of NIR-II Ag2Se polystyrene beads as a fluorescent probe in LFA for rapid and accurate identification of biomarkers. They are suited for use in professional situations.

Self-Assembly Multivalent Fluorescence-Nanobody Coupled Multifunctional Nanomaterial with Colorimetric Fluorescence and Photothermal to Enhance Immunochromatographic Assay

The multimodal lateral flow immunoassay (LFIA) has provided accurate and reliable results for fast and immediate detection. Nonetheless, multimodal LFIA remains challenging to develop biosensors with high sensitivity and tolerance to matrix interference in agro-food. In this study, we developed a self-assembled multivalent fluorescence-nanobody (Nb26-EGFP-H6) with 16.5-fold and 30-fold higher affinity and sensitivity than a monovalent nanobody (Nb26). Based on the Nb26-EGFP-H6, we synthesized enhanced immune-probes Zn-CN@Nb26-EGFP-H6 by pyrolyzing and oxidizing an imidazolating zeolite framework-8 (ZIF-8) to obtain photothermal metal-carbon nanomaterials (Zn-CN) for immobilizing Nb26-EGFP-H6. The rough and porous structure of Zn-CN with a large surface area facilitates the enrichment and immobilization of antibodies. A trimodal lateral flow immunoassay (tLFIA) with colorimetric, fluorescent, and photothermal triple signal outputs was constructed for the detection of aflatoxin B1 (AFB1) in maize. Attractively, the Zn-CN-based tLFIA's multiplex guarantees accurate and sensitive detection of AFB1, with triple signal detection limits of 0.0012 ng/mL (colorimetric signals), 0.0094 ng/mL (fluorescent signals), and 0.252 ng/mL (photothermal signals). The sensitivity of the trimode immunosensor was 628-fold and 42-fold higher than that of the original Nb26-based ELISA (IC50) and the unimodal LFIA (LOD). This work provides an idea for constructing a sensitive, tolerant matrix and efficient and accurate analytical platform for rapidly detecting AFB1 in food.

Handheld NIR-to-NIR Platform for on-site evaluating protective neutralizing antibody against SARS-CoV-2 ancestral strain and Omicron variant after vaccination or infection

Lateral flow assays (LFAs) are promising points-of-care tests, playing a vital role in diseases screening, diagnosis and surveillance. However, development of portable, cheap, and smart LFAs platform for sensitive and accurate quantification of disease biomarkers in complex media is challenging. Here, a cheap handheld device was developed to realize on-site detection of disease biomarkers by Nd³⁺/Yb³⁺ co-doped near-infrared (NIR)-to-NIR downconversion nanoparticles (DCNPs) based LFA. Its sensitivity is at least 8-fold higher for detecting NIR light signal from Nd³⁺/Yb³⁺ co-doped nanoparticles than conventional expensive InGaAs camera based detection platform. Additionally, we enhance NIR quantum yield of Nd³⁺/Yb³⁺ co-doped nanoparticles up to 35.5% via simultaneous high dopant of sensitizer ions Nd³⁺ and emitter ions Yb³⁺. Combination of NIR-to-NIR handheld detection device and ultra-bright NIR emitting NaNbF₄:Yb60%@NaLuF₄ nanoparticle probe allows the detection sensitivity of SARS-CoV-2 ancestral strain and Omicron variants specific neutralizing antibodies LFA up to the level of commercial enzyme linked immunosorbent assay kit. Furthermore, by this robust method, enhanced neutralizing antibodies against SARS-CoV-2 ancestral strain and Omicron variants are observed in healthy participants with Ad5-nCoV booster on top of two doses of inactivated vaccine. This NIR-to-NIR handheld platform provides a promising strategy for on-site evaluating protective humoral immunity after SARS-CoV-2 vaccination or infection.

Ultrasensitive and point-of-care detection of plasma phosphorylated tau in Alzheimer's disease using colorimetric and surface-enhanced Raman scattering dual-readout lateral flow assay

Phosphorylation of tau at Ser (396, 404) (p-tau396,404) is one of the earliest phosphorylation events, and plasma p-tau396,404 level appears to be a potentially promising biomarker of Alzheimer's disease (AD). The low abundance and easy degradation of p-tau in the plasma make the lateral flow assay (LFA) a suitable choice for point-of-care detection of plasma p-tau396,404 levels. Herein, based on our screening of a pair of p-tau396,404-specific antibodies, we developed a colorimetric and surface-enhanced Raman scattering (SERS) dual-readout LFA for the rapid, highly sensitive, and robust detection of plasma p-tau396,404 levels. This LFA realized a detection limit of 60 pg/mL by the naked eye or 3.8 pg/mL by SERS without cross-reacting with other tau species. More importantly, LFA rapidly and accurately differentiated AD patients from healthy controls, suggesting that it has the potential for clinical point-of-care application in AD diagnosis. This dual-readout LFA has the advantages of simple operation, rapid, and ultra-sensitive detection, providing a new way for early AD diagnosis and intervention, especially in primary and community AD screening.

Electronic Supplementary Material

Supplementary material (characterization of AuNPs and 4-MBA@AuNP probe; the optimal 4-MBA load for AuNPs; the optimal K2CO3 volumes for 4-MBA@AuNP-3G5 conjugates; the optimal 3G5 load for 4-MBA@AuNP conjugates; effect of NaCl concentration on 4-MBA@AuNP-3G5 stability; the linear curve of T-line color and SERS intensity versus different p-tau396,404 concentrations; the comparison of colorimetric-based LFA test results and the diagnosis results; Raman intensities and antibody activity of 4-MBA@AuNP-3G5 before and after storage; colorimetric intensity of dual-readout LFA detecting different concentrations of p-tau396,404 protein; sequence of synthesized peptides used in this study; information of the participants in this study; the information of antibodies used in this study) is available in the online version of this article at 10.1007/s12274-022-5354-4.

Recent Advances of Representative Optical Biosensors for Rapid and Sensitive Diagnostics of SARS-CoV-2

The outbreak of Corona Virus Disease 2019 (COVID-19) has again emphasized the significance of developing rapid and highly sensitive testing tools for quickly identifying infected patients. Although the current reverse transcription polymerase chain reaction (RT-PCR) diagnostic techniques can satisfy the required sensitivity and specificity, the inherent disadvantages with time-consuming, sophisticated equipment and professional operators limit its application scopes. Compared with traditional detection techniques, optical biosensors based on nanomaterials/nanostructures have received much interest in the detection of SARS-CoV-2 due to the high sensitivity, high accuracy, and fast response. In this review, the research progress on optical biosensors in SARS-CoV-2 diagnosis, including fluorescence biosensors, colorimetric biosensors, Surface Enhancement Raman Scattering (SERS) biosensors, and Surface Plasmon Resonance (SPR) biosensors, was comprehensively summarized. Further, promising strategies to improve optical biosensors are also explained. Optical biosensors can not only realize the rapid detection of SARS-CoV-2 but also be applied to judge the infectiousness of the virus and guide the choice of SARS-CoV-2 vaccines, showing enormous potential to become point-of-care detection tools for the timely control of the pandemic.

Facile Fabrication of Highly Quantum Dot/AuNP-Loaded Tags for a Dual-Modal Colorimetric/Reversed Ratiometric Fluorescence Immunochromatographic Assay

Developing an easily-prepared, sensitive, and accurate point-of-need immunochromatographic assay (ICA) is significant in food safety screening, clinical diagnosis, and environmental monitoring. However, the current single-modal ICAs are limited in certain instinct drawbacks that restrict analytical performances. Herein, we introduce an ultrasensitive dual-modal colorimetric/reversed ratiometric fluorescence ICA based on facilely prepared immunoprobes with a high loading capacity of red quantum dots and AuNPs. By smartly integrating these red-colored/fluorescent signal probes with an immobilized green quantum dot antigen on the test lines, discrete "turn-on" visual inspection and reversed ratiometric quantification via a portable smartphone-based analyzer were accomplished. As an application, this method was employed to detect 11 phosphodiesterase-5 inhibitors in health foods with ultralow detection limits (0.0028-0.045 ng/mL), high repeatability (coefficient of variations of 0.3-1.91%), and reasonable accuracy (recoveries of 86.6-107%). The proposed method was further validated by the authorized liquid chromatography with tandem mass spectrometry method in actual sample detection. This new assay format can be extended to ultrasensitive flexible detection of other food contaminants, environmental pollutants, or tumor biomarkers within minutes, and it just requires simply prepared signal reporters, easy-to-operate procedures, and a low-cost miniaturized analyzer.

Ultrasensitive point-of-care biochemical sensor based on metal-AIEgen frameworks

Point-of-care (POC) biochemical sensors have found broad applications in areas ranging from clinical diagnosis to environmental monitoring. However, POC sensors often suffer from poor sensitivity. Here, we synthesized a metal-organic framework, where the ligand is the aggregation-induced emission luminogen (AIEgen), which we call metal-AIEgen frameworks (MAFs), for use in the ultrasensitive POC biochemical sensors. MAFs process a unique luminescent mechanism of structural rigidity-enhanced emission to achieve a high quantum yield (~99.9%). We optimized the MAFs to show 10²- to 10³-fold enhanced sensitivity for a hydrogel-based POC digital sensor and lateral flow immunoassays (LFIA). MAFs have a high affinity to directly absorb proteins, which can label antibodies for immunoassays. MAFs-based LFIA with enhanced sensitivity shows robust serum detection for POC clinical diagnosis.

Vanadium Disulfide Nanosheet Boosts Optical Signal Brightness as a Superior Enzyme Label to Improve the Sensitivity of Lateral Flow Immunoassay

The color-enzyme lateral flow immunoassay (LFIA) has attracted widespread attention to expand the detection range and improve sensitivity via amplifying the color signal after catalyzing the substrate. As a kind of layered transition-metal dichalcogenide (TMD), the vanadium disulfide nanosheet (VS₂NS) possesses superior peroxidase-like catalytic activity. Here, a VS₂NS was applied as an enzyme label in the LFIA to detect 17β-estradiol (E2). Compared to natural horseradish peroxidase, the VS₂NS expresses a more prominent enzyme catalytic performance, stability, and adsorption ability. Under optimal conditions, the calculated limit of detection (cLOD) of the VS₂NS-based LFIA is 0.065 ng mL^-1 for E2, which is sixfold lower than that of the optimized colloidal nanoparticle-based LFIA (cLOD = 0.406 ng mL^-1). Besides, the detection linear range of the VS₂NS-based LFIA can be widened by 1.5 times after the catalytic reaction. Moreover, the VS₂NS-based LFIA exhibits excellent practicability in real sample detection. Simultaneously, this study helps open up the application of the VS₂NS in the trace analysis of LFIAs, which can broaden TMDs' scope of application and better show their properties of color enzymes.

Advancements in Testing Strategies for COVID-19

The SARS-CoV-2 coronavirus, also known as the disease-causing agent for COVID-19, is a virulent pathogen that may infect people and certain animals. The global spread of COVID-19 and its emerging variation necessitates the development of rapid, reliable, simple, and low-cost diagnostic tools. Many methodologies and devices have been developed for the highly sensitive, selective, cost-effective, and rapid diagnosis of COVID-19. This review organizes the diagnosis platforms into four groups: imaging, molecular-based detection, serological testing, and biosensors. Each platform's principle, advancement, utilization, and challenges for monitoring SARS-CoV-2 are discussed in detail. In addition, an overview of the impact of variants on detection, commercially available kits, and readout signal analysis has been presented. This review will expand our understanding of developing advanced diagnostic approaches to evolve into susceptible, precise, and reproducible technologies to combat any future outbreak.

Engineering light-initiated afterglow lateral flow immunoassay for infectious disease diagnostics

The pandemic of highly contagious diseases has put forward urgent requirements for high sensitivity and adaptive capacity of point-of-care testing (POCT). Herein, for the first time, we report an aggregation-induced emission (AIE) dye-energized light-initiated afterglow nanoprobes (named LiAGNPs), implemented onto a lateral flow immunoassay (LFIA) test strip, for diagnosis of two highly contagious diseases, human immunodeficiency virus (HIV) and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) as model validation. The primary working mechanism relies on the cyclically generated singlet oxygen (¹O₂)-triggered time-resolved luminescent signals of LiAGNPs in which AIE dyes (TTMN) and chemiluminescent substrates (SO) are loaded. The designed LiAGNPs were found 2-fold and 32-fold sensitive than the currently used Eu(III)-based time-resolved fluorescent nanoparticles and gold nanoparticles in lateral flow immunoassay (LFIA), respectively. In addition, the extra optical behaviors of nude color and fluorescence of LiAGNPs enable the LFIA platform with the capability of the naked eye and fluorescent detection to satisfy the applications under varying scenarios. In short, the versatile LiAGNPs have great potential as a novel time-resolved reporter in enhancing detection sensitivity and application flexibility with LFIA platform for rapid but sensitive infectious disease diagnostics.

Highly Sensitive Lanthanide-Doped Nanoparticles-Based Point-of-Care Diagnosis of Human Cardiac Troponin I

Introduction

Methods

Results

Conclusion

Sensitive and rapid determination of heat shock protein 70 using lateral flow immunostrips and upconversion nanoparticle fluorescence probes

Heat shock protein 70 (Hsp70), belonging to the heat shock protein (HSP) family, is reported to be a potential diagnostic biomarker.

Recent advances in enzyme-enhanced immunosensors

Among the products for rapid detection in different fields, enzyme-based immunosensors have received considerable attention. Recently, great efforts have been devoted to enhancing the output signals of enzymes through different strategies that can significantly improve the sensitivity of enzyme-based immunosensors for the need of practical applications. In this manuscript, the significance of enzyme-based signal transduction patterns in immunoassay and the central role of enzymes in achieving precise control of reaction systems are systematically described. In view of the rapid development of this field, we classify these strategies based on the combination of immune recognition and enzyme amplification into three categories, namely enzyme-based enhancement strategies, combination of the catalytic amplification of enzymes with other signal amplification methods, and substrate-based enhancement strategies. The current focus and future direction of enzyme-based immunoassays are also discussed. This article is not exhaustive, but focuses on the latest advances in different signal generation methods based on enzyme-initiated catalytic reactions and their applications in the detection field, which could provide an accessible introduction of enzyme-based immunosensors for the community with a view to further improving its application efficiency.

Versatile Types of Inorganic/Organic NIR-IIa/IIb Fluorophores: From Strategic Design toward Molecular Imaging and Theranostics

In vivo imaging in the second near-infrared window (NIR-II, 1000-1700 nm), which enables us to look deeply into living subjects, is producing marvelous opportunities for biomedical research and clinical applications. Very recently, there has been an upsurge of interdisciplinary studies focusing on developing versatile types of inorganic/organic fluorophores that can be used for noninvasive NIR-IIa/IIb imaging (NIR-IIa, 1300-1400 nm; NIR-IIb, 1500-1700 nm) with near-zero tissue autofluorescence and deeper tissue penetration. This review provides an overview of the reports published to date on the design, properties, molecular imaging, and theranostics of inorganic/organic NIR-IIa/IIb fluorophores. First, we summarize the design concepts of the up-to-date functional NIR-IIa/IIb biomaterials, in the order of single-walled carbon nanotubes (SWCNTs), quantum dots (QDs), rare-earth-doped nanoparticles (RENPs), and organic fluorophores (OFs). Then, these novel imaging modalities and versatile biomedical applications brought by these superior fluorescent properties are reviewed. Finally, challenges and perspectives for future clinical translation, aiming at boosting the clinical application progress of NIR-IIa and NIR-IIb imaging technology are highlighted.

(Nano)tag-antibody conjugates in rapid tests

Antibodies (Abs) are naturally derived materials with favorable affinity, selectivity, and fast binding kinetics to the respective antigens, which enables their application as promising recognition elements in the development of various types of biosensors/bioassays, especially in rapid tests. These tests are low-cost and easy-to-use biosensing devices with broad applications including medical or veterinary diagnostics, environmental monitoring and industrial usages such as safety and quality analysis in food, providing on-site quick monitoring of various analytes, making it possible to save analysis costs and time. To reach such features, the conjugation of Abs with various nanomaterials (NMs) as tags is necessary, which range from conventional gold nanoparticles to other nanoparticles recently introduced, where magnetic, plasmonic, photoluminescent, or multi-modal properties play a critical role in the overall performance of the analytical device. In this context, to preserve the Ab affinity and provide a rapid response with long-term storage capability, the use of efficient bio-conjugation techniques is critical. Thanks to their prominent role in rapid tests, many studies have been devoted to the design and development of Abs-NMs conjugates with various chemistries including passive adsorption, covalent coupling, and affinity interactions. In this review, we present the state-of-the-art techniques allowing various Ab-NM conjugates with a special focus on the efficiency of the developed probes to be employed in in vitro rapid tests. Challenges and future perspectives on the development of Ab-conjugated nanotags in rapid diagnostic tests are highlighted along with a survey of the progress in commercially available Ab-NM conjugates.

Luminous silica colloids with carbon dot incorporation for sensitive immunochromatographic assay of Zika virus

Fluorescent SiO₂ colloids prepared from silanized CDs embedded in silica spheres were integrated with an immunochromatographic platform for Zika virus detection.

On the Challenges for the Diagnosis of SARS-CoV-2 Based on a Review of Current Methodologies

Diagnosis of COVID-19 has been challenging owing to the need for mass testing and for combining distinct types of detection to cover the different stages of the infection. In this review, we have surveyed the most used methodologies for diagnosis of COVID-19, which can be basically categorized into genetic-material detection and immunoassays. Detection of genetic material with real-time polymerase chain reaction (RT-PCR) and similar techniques has been achieved with high accuracy, but these methods are expensive and require time-consuming protocols which are not widely available, especially in less developed countries. Immunoassays for detecting a few antibodies, on the other hand, have been used for rapid, less expensive tests, but their accuracy in diagnosing infected individuals has been limited. We have therefore discussed the strengths and limitations of all of these methodologies, particularly in light of the required combination of tests owing to the long incubation periods. We identified the bottlenecks that prevented mass testing in many countries, and proposed strategies for further action, which are mostly associated with materials science and chemistry. Of special relevance are the methodologies which can be integrated into point-of-care (POC) devices and the use of artificial intelligence that do not require products from a well-developed biotech industry.

Lateral Flow Immunosensor for Ferritin Based on Dual Signal-Amplified Strategy by Rhodium Nanoparticles

Lateral flow immunoassay (LFIA) is one of the most widely used tools for analysis and field measurement and has the advantages of high efficiency, simple operation, portability, and low cost. Therefore, in this study, we designed a proof-of-concept of LFIA based on rhodium nanoparticles and investigated its improvement by further introducing the tetramethyl benzidine and H₂O₂ mixture as the substrate to trigger the color reaction. The proposed methods were qualitative research by the naked eye and quantitative measurement by a smartphone and software. Under the optimal condition, the detection of ferritin was successfully established with the limit of detection of 0.3 ng/mL. The lowest visually detectable amount was 0.05 ng/mL. To verify the performance of the RhNPs-LFIA, three spiked serum samples were tested, and the recovery rate increased from 88.9 to 129.9%, revealing that the proposed methods were applicable and practically reliable for testing serum samples. The developed RhNP-based LFIA is highly sensitive and convenient, which provides a promising technology for accurate, rapid, high sensitivity, and high screening detection of ferritin in clinical diagnosis.

Hybrids of Upconversion Nanoparticles and Silver Nanoclusters Ensure Superior Bactericidal Capability via Combined Sterilization

It is highly desired to develop new antibacterial agents with superior bactericidal efficiency for minimizing the damage to biological cells. We developed a combined antibacterial nanohybrid exhibiting a superb bactericidal effect and excellent biocompatibility by integrating upconversion nanoparticles (UCNPs) with silver nanoclusters (AgNCs). UCNPs and methylene blue (MB) molecules were encapsulated with silica microspheres via microemulsion, with MB as the photosensitizer. Silver ions (Ag⁺) were reduced by amino groups on the surface of silica spheres, wherein silver nanoclusters (AgNCs) were formed in situ to produce the nanohybrid, UCNPs@SiO₂(MB)@AgNCs. UCNPs emit visible light at 655 nm under excitation by near-infrared radiation (NIR, 980 nm). MB absorbs the emission from UCNPs to generate toxic singlet oxygen (¹O₂), which leads to the apoptosis of bacteria cells. Meanwhile, silver ions released from AgNCs destroy the bacteria membrane structure. Upon NIR irradiation at 980 nm for 10 min, 8.33 μg mL^-1 nanohybrid results in a 100% killing rate for both Gram-positive S. aureus (+) and Gram-negative E. coli (-).

Detection of COVID-19: A review of the current literature and future perspectives

The rapid spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has led to the coronavirus disease 2019 (COVID-19) worldwide pandemic. This unprecedented situation has garnered worldwide attention. An effective strategy for controlling the COVID-19 pandemic is to develop highly accurate methods for the rapid identification and isolation of SARS-CoV-2 infected patients. Many companies and institutes are therefore striving to develop effective methods for the rapid detection of SARS-CoV-2 ribonucleic acid (RNA), antibodies, antigens, and the virus. In this review, we summarize the structure of the SARS-CoV-2 virus, its genome and gene expression characteristics, and the current progression of SARS-CoV-2 RNA, antibodies, antigens, and virus detection. Further, we discuss the reasons for the observed false-negative and false-positive RNA and antibody detection results in practical clinical applications. Finally, we provide a review of the biosensors which hold promising potential for point-of-care detection of COVID-19 patients. This review thereby provides general guidelines for both scientists in the biosensing research community and for those in the biosensor industry to develop a highly sensitive and accurate point-of-care COVID-19 detection system, which would be of enormous benefit for controlling the current COVID-19 pandemic.

Paper/Soluble Polymer Hybrid-Based Lateral Flow Biosensing Platform for High-Performance Point-of-Care Testing

As a global shift continues to occur in high burden diseases toward developing countries, the importance of medical diagnostics based on point-of-care testing (POCT) is rapidly increasing. However, most diagnostic tests that meet clinical standards rely on high-end analyzers in central hospitals. Here, we report the development of a simple, low-cost, mass-producible, highly sensitive/quantitative, automated, and robust paper/soluble polymer hybrid-based lateral flow biosensing platform, paired with a smartphone-based reader, for high-performance POCT. The testing architecture incorporates a polymeric barrier that programs/automates sequential reactions via a polymer dissolving mechanism. The smartphone-based reader with simple opto-mechanical parts offers a stable framework for accurate quantification. Analytical performance of this platform was evaluated by testing human cardiac troponin I (cTnI), a preferred biomarker for the diagnosis of myocardial infarction, in serum/plasma samples. Coupled with catalytic/colorimetric gold-ion amplification, this platform produced results within 20 min with a detection limit of 0.92 pg mL^-1 and a coefficient of variation <10%, which is equivalent to the performance of a high-sensitivity standard analyzer, and operated within acceptable levels stipulated by clinical guidelines. Moreover, cTnI clinical sample tests indicate a high correlation (r = 0.981) with the contemporary analyzers, demonstrating the clinical utility of this platform in high-performance POCT.

Highly Sensitive Chemiluminescence-Based Lateral Flow Immunoassay for Cardiac Troponin I Detection in Human Serum

Lateral flow assays (LFAs) have become the most common biosensing platforms for point-of-care testing due to their compliance with the ASSURED (affordable, sensitive, specific, user-friendly, rapid/robust, equipment-free, and deliverable to end-users) guidelines stipulated by the World Health Organization. However, the limited analytical sensitivity and low quantitative capability of conventional LFAs, which use gold nanoparticles (AuNPs) for colorimetric labeling, have prevented high-performance testing. Here, we report the development of a highly sensitive chemiluminescence (CL)-based LFA involving AuNPs conjugated with aldehyde-activated peroxidase and antibody molecules-i.e., AuNP-(ald)HRP-Ab-as a new conjugation scheme for high-performance testing in LFAs. When paired with the CL-based signal readout modality, the AuNP-(ald)HRP-Ab conjugate resulted in 110-fold enhanced sensitivity over the colorimetric response of a typical AuNP-Ab conjugate. To evaluate the performance of the CL-based LFA, we tested it with human cardiac troponin I (cTnI; a standard cardiac biomarker used to diagnose myocardial infarction) in standard and clinical serum samples. Testing the standard samples revealed a detection limit of 5.6 pg·mL^-1 and acceptably reliable precision (with a coefficient of variation of 2.3%-8.4%), according to clinical guidelines. Moreover, testing the clinical samples revealed a high correlation (r = 0.97) with standard biochemical analyzers, demonstrating the potential clinical utility of the CL-based LFA for high-performance cTnI testing.

Recent advances in nanomaterial-enhanced enzyme-linked immunosorbent assays

This review highlights functional roles of nanomaterials for advancing conventional ELISA assays by serving as substrate-alternatives, enzyme-alternatives, or non-enzyme amplifiers.