Hollow Copper Sulfide Nanosphere–Doxorubicin/Graphene Oxide Core–Shell Nanocomposite for Photothermo-chemotherapy

Modulating nanostructures with polyvinylpyrrolidone: Design and development of a porous, biocompatible, and pH-Stable core-shell magnetic microrobot for demonstrating drug absorption from wastewater

Increased antineoplastic drug concentrations in wastewater stem from ineffective treatment plants and increased usage. Although microrobots are promising for pollutant removal, they face hurdles in developing a superstructure with superior adsorption capabilities, biocompatibility, porosity, and pH stability. This study focused on adjusting the PVP concentration from 0.05 to 0.375 mM during synthesis to create a favorable CMOC structure for drug absorption. Lower PVP concentrations (0.05 mM) yielded a three-dimensional nanoflower structure of CaMoO4 and CuS nanostructures, whereas five-fold concentrations (0.25 mM) produced a porous structure with a dense CuS core encased in a transparent CaMoO4 shell. The magnetically movable and pH-stable COF@CMOC microrobot, achieved by attaching CMOC to cobalt ferrite (CoF) NPs, captured doxorubicin efficiently, with up to 57 % efficiency at 200 ng/mL concentration for 30 min, facilitated by electrostatic interaction, hydrogen bonding, and pore filling of DOX. The results demonstrated that DOX removal through magnetic motion showed superior performance, with an estimated improvement of 57% compared to stirring conditions (17 %). A prototype PDMS microchannel system was developed to study drug absorption and microrobot recovery. The CaMoO4 shell of the microrobots exhibited remarkable robustness, ensuring long-lasting functionality in harsh wastewater environments and improving biocompatibility while safeguarding the CuS core from degradation. Therefore, microrobots are a promising eco-friendly solution for drug extraction. These microrobots show promise for the selective removal of doxorubicin from contaminated wastewater.

Engineered photonic near-infrared light activated photothermal theranostic nanovaccine induced targeted remodeling of tumor microenvironment

Tumor recurrence, which happens as a result of persisting tumor cells and minor lesions after treatments like surgery and chemotherapy, is a major problem in oncology. Herein, a strategy to combat this issue by utilize a theranostic nanovaccine composed of photonic HCuS. This nanovaccine aims to eradicate cancer cells and their traces while also preventing tumor recurrence via optimizing the photothermal immune impact. Successful membrane targeting allows for the introduction of new therapeutic agents into the tumor cells. Together with co-encapsulated Toll-Like Receptors (TLR7/8) agonist R848 for activating T cells and maturing DCs, the combined effects of HCuS and ICG function as photothermal agents that generate heat in the presence of NIR light. Photothermal-mediated immunotherapy with therapeutic modalities proved successful in killing tumor cells. By activating the immune system, this new photonic nanovaccine greatly increases immunogenic cell death (ICD), kills tumor cells, and prevents their recurrence.

Chitosan/copper sulfide nanoparticles (CS/CuSNPs) hybrid fibers with improved mechanical and photo-thermal conversion properties via tuning CuSNPs' morphological structures

Conventional textiles are inadequate for maintaining warmth in extremely cold conditions. Therefore, the development of photo-thermal fibers for personal thermal management textiles has emerged as an urgent need. Herein, novel chitosan/copper sulfide nanoparticles (CS/CuSNPs) hybrid fibers with photo-thermal function were fabricated successfully. Significantly, our study demonstrated that the tensile and photo-thermal conversation properties of the CS/CuSNPs hybrid fibers could be effectively regulated by altering the CuSNPs` morphological structures. Compared with other CuSNPs (tube-like, sphere-like, and flower-like), the plate-like CuSNPs with smooth surfaces and uniform nanometer size played a significant role by scattering incident light in the fibers as a secondary light source for CuSNPs absorbance. Thus, under IR light irradiation at a power density of 1.0 W/cm2, the surface temperature of CS/0.1 wt% plate-like CuSNPs hybrid fibers sharply increased by 27.6 °C, which was more than 4 times of the pure CS fibers. And the breaking strength and initial modulus of CS/0.1 wt% plate-like CuSNPs hybrid fibers increased by more than 18.37 and 6.88 % compared with the nascent CS fibers. This study develops a novel and effective strategy to tune the photo-thermal and tensile properties of CS hybrid fibers without incorporating more content or additives.

Preparation and performance of a stimuli-responsive drug delivery system: novel light-triggered temperature-sensitive drug-loaded microcapsules

Stimuli-responsive/smart drug delivery systems (DDSs), particularly those that use temperature as a stimuli-response factor to activate drug release, are the subject of recent research. A phase change material (PCM) is a popular thermally responsive material that can be used as a drug carrier and only when the system temperature is above the phase change point is the drug released following the phase change material changing from solid to liquid. In this study, a novel NIR light-triggered temperature-sensitive drug delivery system is developed for controllable release of acyclovir (ACV). For this purpose, a mixture of a phase change material (T38) and an ACV compound is first emulsified with copper oxide nanoparticles (CuO NPs) as a Pickering stabilizer and a photothermal conversion material, and then encapsulated with SiO2 to form a photothermal stimuli-responsive delivery system. This system shows a uniform spherical shape with a well-distinct core-shell structure, and is further experimentally proven to be able to controllably release drugs with solid-liquid transition of the phase change carrier upon temperature change. These results indicate that cumulative release of ACV can reach 51.2% at 40 °C within 20 hours, which is much higher than 27.3% release achieved below the melting point of T38. In addition, CuO NPs with excellent photothermal conversion ability endow the system with precisely controllable drug delivery via NIR light stimulation, where the cumulative drug release can reach 83.6% after 7 cycles of light stimulation, allowing controlled release at a specific time or location.

Photo-Stimuli-Responsive CuS Nanomaterials as Cutting-Edge Platform Materials for Antibacterial Applications

Photo-stimuli-responsive therapeutic nanomaterials have gained widespread attention as frontline materials for biomedical applications. The photoactivation strategies are classified as single-modality (based on either reactive oxygen species (ROS)-based photodynamic therapy (PDT), hyperthermia-based photothermal therapy (PTT)), or dual-modality (which combines PDT and PTT). Due to its minimal invasiveness, phototherapy has been extensively applied as an efficient therapeutic platform for many diseases, including skin cancers. However, extensive implementation of phototherapy to address the emergence of multidrug-resistant (MDR) bacterial infections remains challenging. This review focuses on copper sulfide (CuS) nanomaterials as efficient and cost-effective PDT and PTT therapeutic nanomaterials with antibacterial activity. The features and merits of CuS nanomaterials as therapeutics are compared to those of other nanomaterials. Control of the dimensions and morphological complexity of CuS nanomaterials through judicious synthesis is then introduced. Both the in vitro antibacterial activity and the in vivo therapeutic effect of CuS nanomaterials and derivative nanocomposites composed of 2D nanomaterials, polymers, metals, metal oxides, and proteins are described in detail. Finally, the perspective of photo-stimuli-responsive CuS nanomaterials for future clinical antibacterial applications is highlighted. This review illustrates that CuS nanomaterials are highly effective, low-toxic, and environmentally friendly antibacterial agents or platform nanomaterials for combatting MDR bacterial infections.

Fabrication of a smart drug delivery system based on hollow Ag2S@mSiO2 nanoparticles for fluorescence-guided synergistic photothermal chemotherapy

A novel near-infrared (NIR) light-triggered smart nanoplatform has been developed for cancer targeting and imaging-guided combined photothermal-chemo treatment. Notably, Ag₂S has a dual function of photothermal therapy and fluorescence imaging, which greatly simplifies the structure of the system. It can emit fluorescence at 820 nm under an excitation wavelength of 560 nm. The phase-change molecule of 1-tetradecanol (TD) is introduced as a temperature-sensitive gatekeeper to provide the nanocarrier with controlled release capability of doxorubicin (DOX). The nanocarrier (HAg₂S@mSiO₂-TD/DOX) shows a high drug loading capacity of 26.3% and exhibits an apparent NIR-responsive DOX release property. Under NIR irradiation, the photothermal effect of HAg₂S nanocores facilitated the release of DOX through the melting of TD. The cytotoxicity test shows that the nanocarriers have good biocompatibility. As the same time, the synergistic combination leads to a better cancer inhibition effect than individual therapy alone in vitro. Cell uptake tests indicate that the carriers have excellent fluorescence imaging ability and high cellular uptake for HepG2 cells. This work provides a new strategy for the fabrication of smart nanocarriers with simple structures for fluorescence-mediated combination cancer therapy. Fabrication of a smart drug delivery system based on hollow Ag₂S@mSiO₂ nanoparticles for fluorescence-guided synergistic photothermal chemotherapy.

Graphene Oxide Thin Films with Drug Delivery Function

Graphene oxide has been used in different fields of nanomedicine as a manager of drug delivery due to its inherent physical and chemical properties that allow its use in thin films with biomedical applications. Several studies demonstrated its efficacy in the control of the amount and the timely delivery of drugs when it is incorporated in multilayer films. It has been demonstrated that oxide graphene layers are able to work as drug delivery or just to delay consecutive drug dosage, allowing the operation of time-controlled systems. This review presents the latest research developments of biomedical applications using graphene oxide as the main component of a drug delivery system, with focus on the production and characterization of films, in vitro and in vivo assays, main applications of graphene oxide biomedical devices, and its biocompatibility properties.

An Intelligent Nanovehicle Armed with Multifunctional Navigation for Precise Delivery of Toll-Like Receptor 7/8 Agonist and Immunogenic Cell Death Amplifiers to Eliminate Solid Tumors and Trigger Durable Antitumor Immunity

Cancer immunotherapy is revolutionary in oncology and hematology. However, a low response rate restricts the clinical benefits of this therapy owing to inadequate T lymphocyte infiltration and low delivery efficiency of immunotherapeutic drugs. Herein, an intelligent nanovehicle (folic acid (FA)/1-(4-(aminomethyl) benzyl)-2-butyl-1H-imidazo[4,5-c]quinolin-4-amine (IMDQ)-oxaliplatin (F/IMO)@CuS) armed with multifunctional navigation is designed for the accurate delivery of cargoes to tumor cells and dendritic cells (DCs), respectively. The nanovehicle is based on a near infrared-responsive inorganic CuS nanoparticles, acting as a photosensitizer and carrier of the chemotherapeutic agent oxaliplatin, and enters tumor cells owing to the presence of folic acid on the surface of CuS upon intratumoral injection. Furthermore, a toll-like receptor (TLR) 7/8 agonist-conjugated polymer, anchored on the surface of CuS, is modified with mannose to bind with DCs in the tumor microenvironment. Upon exposure to laser irradiation, nanovehicles disassemble, releasing oxaliplatin, to ablate tumor cells and amplify immunogenic cell death in combination with photothermal therapy. Mannose-modified polymer-TLR7/8 agonist conjugates are subsequently exposed, leading to the activation of DCs and proliferation of T cells. Collectively, these intelligent nanovehicles reduce tumor burden, exert a robust antitumor immune response, and generate long-term immune protection to prevent tumor recurrence.

Doxorubicin-loaded graphene oxide nanocomposites in cancer medicine: Stimuli-responsive carriers, co-delivery and suppressing resistance

INTRODUCTION

The application of doxorubicin (DOX) in cancer therapy has been limited due to its drug resistance and poor internalization. Graphene oxide (GO) nanostructures have the capacity for DOX delivery while promoting its cytotoxicity in cancer.

AREAS COVERED

The favorable characteristics of GO nanocomposites, preparation method, and application in cancer therapy are described. Then, DOX resistance in cancer is discussed. The GO-mediated photothermal therapy and DOX delivery for cancer suppression are described. Preparation of stimuli-responsive GO nanocomposites, surface functionalization, hybrid nanoparticles, and theranostic applications are emphasized in DOX chemotherapy.

EXPERT OPINION

Graphene oxide nanoparticle-based photothermal therapy maximizes the anti-cancer activity of DOX against cancer cells. Apart from DOX delivery, GO nanomaterials are capable of loading anti-cancer agents and genetic tools to minimize drug resistance and enhance the cytolytic impact of DOX in cancer eradication. To enhance DOX accumulation in cancer cells, stimuli-responsive (redox-, light-, enzyme- and pH-sensitive) GO nanoparticles have been developed for DOX delivery. Further development of targeted delivery of DOX-loaded GO nanomaterials against cancer cells may be achieved by surface modification of polymers such as polyethylene glycol, hyaluronic acid, and chitosan. Doxorubicin-loaded GO nanoparticles have demonstrated theranostic potential for simultaneous diagnosis and therapy. Hybridization of GO with other nanocarriers such as silica and gold nanoparticles further broadens their potential anti-cancer therapy applications.

Metal Sulfide Semiconductor Nanomaterials and Polymer Microgels for Biomedical Applications

The development of nanomaterials with therapeutic and/or diagnostic properties has been an active area of research in biomedical sciences over the past decade. Nanomaterials have been identified as significant medical tools with potential therapeutic and diagnostic capabilities that are practically impossible to accomplish using larger molecules or bulk materials. Fabrication of nanomaterials is the most effective platform to engineer therapeutic agents and delivery systems for the treatment of cancer. This is mostly due to the high selectivity of nanomaterials for cancerous cells, which is attributable to the porous morphology of tumour cells which allows nanomaterials to accumulate more in tumour cells more than in normal cells. Nanomaterials can be used as potential drug delivery systems since they exist in similar scale as proteins. The unique properties of nanomaterials have drawn a lot of interest from researchers in search of new chemotherapeutic treatment for cancer. Metal sulfide nanomaterials have emerged as the most used frameworks in the past decade, but they tend to aggregate because of their high surface energy which triggers the thermodynamically favoured interaction. Stabilizing agents such as polymer and microgels have been utilized to inhibit the particles from any aggregations. In this review, we explore the development of metal sulfide polymer/microgel nanocomposites as therapeutic agents against cancerous cells.

Multifunctional MnO2-based nanoplatform-induced ferroptosis and apoptosis for synergetic chemoradiotherapy

Background: Radiosensitizers that can effectively consume glutathione provide broad prospects for enhancing the efficacy and reducing the side effects of radiotherapy. Aim: To explore the potential role of CuS@mSiO₂@MnO₂ nanocomposites in synergetic chemoradiotherapy. Methods: Nanocomposites were characterized by transmission electron microscopy, UV-Vis spectrometry and dynamic light scattering and were loaded with doxorubicin (DOX). The uptake and biodistribution of nanocomposites were observed by CCK8 assay, MRI and confocal laser scanning microscopy. The radiosensitization effect of nanocomposites and nanocomposites/DOX was assessed both in vitro and in vivo. Results: In vitro application of nanocomposites, with an average diameter of 30 nm and ζ-potential of 13.2 ± 0.4 mV, in combination with radiotherapy, depleted glutathione and induced ferroptosis and apoptosis. Nanocomposites/DOX exhibited tumor cell damage in vivo. Conclusion: We propose that this glutathione-depleting nanosystem could be a radiosensitizer as well as a drug transporter.

Sulfobetaine methacrylate-albumin-coated graphene oxide incorporating IR780 for enhanced breast cancer phototherapy

Aim: Enhance the colloidal stability and photothermal capacity of graphene oxide (GO) by functionalizing it with sulfobetaine methacrylate (SBMA)-grafted bovine serum albumin (BSA; i.e., SBMA-g-BSA) and by loading IR780, respectively. Materials & methods: SBMA-g-BSA coating and IR780 loading into GO was achieved through a simple sonication process. Results: SBMA-g-BSA-functionalized GO (SBMA-BSA/GO) presented an adequate size distribution and cytocompatibility. When in contact with biologically relevant media, the size of the SBMA-BSA/GO only increased by 8%. By loading IR780 into SBMA-BSA/GO, its photothermal capacity increased by twofold. The combination of near infrared light with SBMA-BSA/GO did not induce photocytotoxicity on breast cancer cells. In contrast, the interaction of IR780-loaded SBMA-BSA/GO with near infrared light caused the ablation of cancer cells. Conclusion: IR780-loaded SBMA-BSA/GO displayed an improved colloidal stability and phototherapeutic capacity.

Graphene-semiconductor nanocomposites for cancer phototherapy

Being a carbon-based hybrid, graphene-semiconductor composites have attracted considerable attention in recent decades owing to their potential features such as high photosensitivity, extended light absorption, and effective separation of charge carriers, thus have been regarded as a promising platform for environmental and biomedical applications, respectively. In this mini-review, we first summarized the recent advancements in the development of graphene-based semiconductor nanocomposites via sol-gel, solution mixing, in situ growth, hydrothermal, and solvothermal approaches, and then comprehensively reviewed their potential light activated cancer phototherapeutic applications. Finally, we rationally analyze the current challenges and new perspectives for the future development of more effective phototherapeutic nanoagents. We hope to offer enriched information to harvest the utmost fascinating properties of graphene as a platform to construct efficient graphene/semiconductor hybrids for cancer phototherapy.

CuS/rGO-PEG Nanocomposites for Photothermal Bonding of PMMA-Based Plastic Lab-on-a-Chip

We developed copper sulfide (CuS)/reduced graphene oxide (rGO)-poly (ethylene glycol) (PEG) nanocomposites for photothermal bonding of a polymethyl methacrylate (PMMA)-based plastic lab-on-a-chip. The noncontact photothermal bonding of PMMA-based plastic labs-on-chip plays an important role in improving the stability and adhesion at a high-temperature as well as minimizing the solution leakage from microchannels when connecting two microfluidic devices. The CuS/rGO-PEG nanocomposites were used to bond a PMMA-based plastic lab-on-a-chip in a short time with a high photothermal effect by a near-infrared (NIR) laser irradiation. After the thermal bonding process, a gap was not generated in the PMMA-based plastic lab-on-a-chip due to the low viscosity and density of the CuS/rGO-PEG nanocomposites. We also evaluated the physical and mechanical properties after the thermal bonding process, showing that there was no solution leakage in PMMA-based plastic lab-on-a-chip during polymerase chain reaction (PCR) thermal cycles. Therefore, the CuS/rGO-PEG nanocomposite could be a potentially useful nanomaterial for non-contact photothermal bonding between the interfaces of plastic module lab-on-a-chip.

State-of-the-art advances of copper-based nanostructures in the enhancement of chemodynamic therapy

Chemodynamic therapy (CDT) is a new emerging strategy for the in situ treatment of tumors. In the microenvironment of tumor cells, CDT may be achieved through the generation of reactive oxygen species (ROS), e.g., hydroxyl radicals (˙OH) and singlet oxygen (¹O₂), which induce the death of tumor cells. Copper (Cu) or other transition-metal ions catalyze the production of ˙OH by hydrogen peroxide (H₂O₂) through Fenton or Fenton-like reactions. With the development of advanced nanotechnology, nanotherapeutic systems with Cu-based nanostructures have received extensive attention and have been demonstrated for their wide applications in the design and construction of nanotherapeutic systems for CDT, along with multimodal synergistic therapy. Herein, the cutting-edge developments of Cu-based nanostructures in CDT are reviewed and discussed, by focusing on the monotherapy of CDT as well as synergistic treatments by hyphenating CDT with various therapeutic protocols, e.g., photothermal therapy (PTT), photodynamic therapy (PDT), sonodynamic therapy (SDT), and so on. In addition, the potential challenges and future perspectives are described in the improvement of CDT therapeutic efficacy, the enhancement of targeting capability, and mechanistic investigations on CDT therapy.

Core-shell nanostructures: perspectives towards drug delivery applications

Nanosystems have shown encouraging outcomes and substantial progress in the areas of drug delivery and biomedical applications. However, the controlled and targeted delivery of drugs or genes can be limited due to their physicochemical and functional properties. In this regard, core-shell type nanoparticles are promising nanocarrier systems for controlled and targeted drug delivery applications. These functional nanoparticles are emerging as a particular class of nanosystems because of their unique advantages, including high surface area, and easy surface modification and functionalization. Such unique advantages can facilitate the use of core-shell nanoparticles for the selective mingling of two or more different functional properties in a single nanosystem to achieve the desired physicochemical properties that are essential for effective targeted drug delivery. Several types of core-shell nanoparticles, such as metallic, magnetic, silica-based, upconversion, and carbon-based core-shell nanoparticles, have been designed and developed for drug delivery applications. Keeping the scope, demand, and challenges in view, the present review explores state-of-the-art developments and advances in core-shell nanoparticle systems, the desired structure-property relationships, newly generated properties, the effects of parameter control, surface modification, and functionalization, and, last but not least, their promising applications in the fields of drug delivery, biomedical applications, and tissue engineering. This review also supports significant future research for developing multi-core and shell-based functional nanosystems to investigate nano-therapies that are needed for advanced, precise, and personalized healthcare systems.

Hollow Prussian Blue Nanospheres for Photothermal/Chemo-Synergistic Therapy

BACKGROUND

The integration of NIR photothermal therapy and chemotherapy is considered as a promising technique for future cancer therapy. Hollow Prussian nanospheres have attracted much attention due to excellent near-infrared photothermal conversion effect and drug-loading capability within an empty cavity. However, to date, the hollow Prussian nanospheres have been prepared by a complex procedure or in organic media, and their shell thickness and size cannot be controlled. Thus, a simple and controllable route is highly desirable to synthesize hollow Prussian nanospheres with controllable parameters.

MATERIALS AND METHODS

Here, in our designed synthesis route, the traditional FeCl3 precursor was replaced with Fe2O3 nanospheres, and then the Prussian blue (PB) nanoparticles were engineered into hollow-structured PB (HPB) nanospheres through an interface reaction, where the Fe2O3 colloidal template provides Fe3+ ions. The reaction mechanism and control factors of HPB nanospheres were systematically investigated. Both in vitro and in vivo biological effects of the as-synthesized HPB nanospheres were evaluated in detail.

RESULTS

Through systematical experiments, a solvent-mediated interface reaction mechanism was put forward, and the parameters of HPB nanospheres could be easily adjusted by growth time and template size under optimal water and ethanol ratio. The in vitro tests show the rapid and remarkable photothermal effects of the as-prepared HPB nanospheres under NIR laser irradiation (808 nm). Meanwhile, HPB nanospheres also demonstrated a high DOX loading capacity of 440 mg g-1 as a drug carrier, and the release of the drug can be regulated by the heat from PB shell under the exposure of an NIR laser. The in vivo experiments confirmed the outstanding performance of HPB nanospheres in photothermal/chemo-synergistic therapy of cancer.

CONCLUSION

A solvent-mediated template route was developed to synthesize hollow Prussian blue (HPB) nanospheres in a simple and controllable way. The in vitro and in vivo results demonstrate the as-synthesized HPB nanospheres as a promising candidate due to their low toxicity and high efficiency for cancer therapy.

Poly(ionic liquid)-Gated CuCo2S4 for pH-/Thermo-Triggered Drug Release and Photoacoustic Imaging

A novel hybrid drug nanocarrier is developed with CuCo₂S₄ nanoparticles as the core to be encapsulated by poly(ionic liquid) (PIL), that is, poly(tetrabutylphosphonium styrenesulfonate) (P[P_4,4,4,4][SS]), as the shell. Doxorubicin (DOX) is loaded onto the PIL shell via electrostatic attraction involving amine in DOX and styrenesulfonate in PIL. pH- and thermal-responsive characteristics of P[P_4,4,4,4][SS] endow the multifunctional hybrid nanocarrier system DOX-CuCo₂S₄@PIL with sensitive dual-stimuli-triggered drug release behaviors. The CuCo₂S₄ core converts near-infrared (NIR) irradiation into thermal energy to trigger the shrinkage of the PIL shell, which subsequently promotes drug release, and the pH-responsive release of DOX involves pH-sensitive electrostatic interaction of the PIL shell with DOX. A favorable controlled release of 90.5% is achieved under pH/thermo dual stimuli. In vitro experiments with MCF-7 cells well demonstrated that the drug release is controlled by the acidic intracellular environment with NIR irradiation. The CuCo₂S₄ core also serves as a photoacoustic (PA) imaging contrast agent, as demonstrated by in vivo treatment of the MCF-7-carrying mice.

CuS@PDA-FA nanocomposites: a dual stimuli-responsive DOX delivery vehicle with ultrahigh loading level for synergistic photothermal-chemotherapies on breast cancer

In this study, CuS@PDA nanoparticles were synthesized and used to create a novel tumor-targeting nanocomposite platform composed of copper sulfide@polydopamine-folic acid/doxorubicin (CuS@PDA-FA/DOX) for performing both photothermal and chemotherapeutic cancer treatment. The nanocomposite platform has ultrahigh loading levels (4.2 ± 0.2 mg mg-1) and a greater photothermal conversion efficiency (η = 42.7%) than CuS/PDA alone. The uptake of CuS@PDA-FA/DOX nanocomposites is much higher in MCF-7 cells than in A549 cells because MCF-7 cells have much higher folic acid receptors than A549. Under near infrared (NIR) irradiation, the CuS@PDA-FA/DOX system using a synergistic combination of photothermal therapy and chemotherapy yields a better therapeutic effect than either photothermal therapy or chemotherapy alone. The treatment is very effective with the cell viability is only 5.6 ± 1.4%.

Glutathione triggered degradation of polydopamine to facilitate controlled drug release for synergic combinational cancer treatment

Here we report a novel mechanism for triggering drug release in the polydopamine (PDA)-coated magnetic CuCo2S4 core-shell nanostructure by glutathione (GSH) triggered degradation of PDA for release. In the design, we used PDA coated CuCo2S4 as the nanocarrier with polyethylene glycol and folic acid targeting molecules to ensure the safe delivery of doxorubicin (DOX) to cancer cells. In addition, the controlled release could be enforced by taking advantage of the pH sensitivity of PDA to tumor acidic environments. The targeting and treatment of HeLa cancer cells were very effective and the killing was more efficient at higher levels of GSH. Furthermore, the designed system not only could be used for drug delivery but also could combine photothermal therapy with chemotherapy in a synergetic way. Plus, the system could be used for magnetic resonance imaging (MRI), which is beneficial for imaging-guided treatment.

Inorganic nanomaterials for chemo/photothermal therapy: a promising horizon on effective cancer treatment

During the last few decades, nanotechnology has established many essential applications in the biomedical field and in particular for cancer therapy. Not only can nanodelivery systems address the shortcomings of conventional chemotherapy such as limited stability, non-specific biodistribution and targeting, poor water solubility, low therapeutic indices, and severe toxic side effects, but some of them can also provide simultaneous combination of therapies and diagnostics. Among the various therapies, the combination of chemo- and photothermal therapy (CT-PTT) has demonstrated synergistic therapeutic efficacies with minimal side effects in several preclinical studies. In this regard, inorganic nanostructures have been of special interest for CT-PTT, owing to their high thermal conversion efficiency, application in bio-imaging, versatility, and ease of synthesis and surface modification. In addition to being used as the first type of CT-PTT agents, they also include the most novel CT-PTT systems as the potentials of new inorganic nanomaterials are being more and more discovered. Considering the variety of inorganic nanostructures introduced for CT-PTT applications, enormous effort is needed to perform translational research on the most promising nanomaterials and to comprehensively evaluate the potentials of newly introduced ones in preclinical studies. This review provides an overview of most novel strategies used to employ inorganic nanostructures for cancer CT-PTT as well as cancer imaging and discusses current challenges and future perspectives in this area.

Single-Layer Assembly of Multifunctional Carboxymethylcellulose on Graphene Oxide Nanoparticles for Improving in Vivo Curcumin Delivery into Tumor Cells

Nanodrug delivery systems are considered as promising therapeutic platforms to convey drugs to tumor cells. In this study, a single layer of carboxymethylcellulose (CMC) and poly N-vinylpyrrolidone (PVP) was cross-linked through disulfide bond and deposited on graphene oxide nanoparticles (GO NPs) using layer-by-layer technique. Overexpression of folate receptors on tumor cells is a great hallmark for drug delivery systems; though the NPs were functionalized by monoclonal folic acid antibody (FA) using polyethylene glycol (PEG) as linker. The mean diameter of synthesized nanoparticles was 60 nm. Curcumin was encapsulated within CMC layer with high encapsulation capacity of 94%. In vitro investigation showed 87% curcumin release at simulated tumor environment. Curcumin loaded FA modified CMC/PVP GO NPs showed high inhibition of 76 and 81% against Saos2 and MCF7 cell lines in vitro. In vivo investigations on 4T1 bearing breast cancer mice model exhibited 76% antitumor efficiency via active targeting mechanism of folate mediated transport without any significant side effect. Immunohistochemistry and immunofluorescence analyses showed enhanced antiangiogenesis, apoptosis and tumor growth inhibition.

Carbon-Based Nanomaterials for Biomedical Applications: A Recent Study

The study of carbon-based nanomaterials (CBNs) for biomedical applications has attracted great attention due to their unique chemical and physical properties including thermal, mechanical, electrical, optical and structural diversity. With the help of these intrinsic properties, CBNs, including carbon nanotubes (CNT), graphene oxide (GO), and graphene quantum dots (GQDs), have been extensively investigated in biomedical applications. This review summarizes the most recent studies in developing of CBNs for various biomedical applications including bio-sensing, drug delivery and cancer therapy.