Preparation of a Codelivery System Based on Vancomycin/Silk Scaffold Containing Silk Nanoparticle Loaded VEGF

Stimulus-responsive biomacromolecule wound dressings for enhanced drug delivery in chronic wound healing: A review

Addressing the challenge of poor wound healing in chronic wounds remains complex, as the underlying physiological mechanisms are still not fully understood. Traditional wound dressings often fail to meet the specific needs of the chronic wound healing process. Recently, considerable interest has shifted toward employing biomacromolecule-based smart wound dressings to facilitate wound healing. These stimuli-responsive dressings have undergone substantial development to manage local drug delivery, demonstrating promising therapeutic effects in treating chronic wound defects. They have displayed improved drug release profiles both in vitro and in vivo. Recently, there have been advancements in the development of innovative dual and multi-stimuli responsive dressings that react to combinations of signals including pH-temperature, pH-enzyme, pH-ROS, pH-glucose, pH-NIR, and multiple stimuli. This paper offers an in-depth review of recent progress in responsive wound dressings based on biomacromolecules, with a specific focus on their design, drug release capabilities, and therapeutic advantages.

Silk fibroin/chitosan thiourea hydrogel scaffold with vancomycin and quercetin-loaded PLGA nanoparticles for treating chronic MRSA osteomyelitis in rats

Chronic osteomyelitis presents significant treatment challenges, necessitating an efficient system for infection elimination and bone repair. This study developed a natural hydrogel scaffold using silk fibroin (SF) and chitosan thiourea (CST), incorporating vancomycin (VC) and quercetin (QC) loaded PLGA nanoparticles (NPs) for dual-purpose treatment. SF/CST hydrogel scaffolds exhibited homogeneous porosity and smaller interconnected pore size than pure SF and pure CST hydrogel scaffolds. Optimal PLGA/QC NPs measured 206 nm in size, displayed spherical morphology, had uniform distribution, and achieved 87 % QC loading. The release study showed sustained long-term release of VC and QC from the hydrogel scaffolds for over 20 days. Biocompatibility tests indicated that hydrogel scaffolds promoted osteoblast adhesion without cytotoxicity, with QC-containing scaffolds enhancing osteoblast growth. Antibacterial tests confirmed retained VC activity against methicillin-resistant Staphylococcus aureus (MRSA) in SF/CST. An experimental study assessed the efficacy of the hydrogel scaffolds in a MRSA-infected rat osteomyelitis model. Radiographic scores demonstrated a significant reduction for SF/CST-VC-PLGA/QC NPs compared to control, indicating reduced osteomyelitis effects. Macroscopic evaluations showed notable reductions in gross pathological effects for VC-containing groups. Histopathological assessments revealed significantly lower osteomyelitis scores and higher healing scores in the SF/CST-VC-PLGA/QC NPs, with reduced inflammatory cell infiltration and more organized connective tissue formation. In conclusion, SF/CST-VC-PLGA/QC NPs is an effective dual drug delivery system for osteomyelitis treatment, demonstrating significant antibacterial activity, enhanced bone regeneration, and reduced infection rate.

Synthesis and characterization of injectable thermosensitive hydrogel based on Pluronic-grafted silk fibroin copolymer containing hydroxyapatite nanoparticles as potential for bone tissue engineering

Injectable hydrogels are promising for bone tissue engineering due to their minimally invasive application and adaptability to irregular defects. This study presents the development of pluronic grafted silk fibroin (PF-127-g-SF), a temperature-sensitive graft copolymer synthesized from SF and modified PF-127 via a carbodiimide coupling reaction. The PF-127-g-SF copolymer exhibited a higher sol-gel transition temperature (34 °C at 16 % w/v) compared to PF-127 (23 °C), making it suitable for injectable applications. It also showed improved flexibility and strength, with a yielding point increase from <10 % to nearly 30 %. Unlike PF-127 gel, which degrades within 72 h in aqueous media, the PF-127-g-SF copolymer maintained a stable gel structure for over two weeks due to its robust crosslinked hydrogel network. Incorporating hydroxyapatite nanoparticles (n-HA) into the hydrogel reduced pore size and decreased swelling and degradation rates, extending structural stability to four weeks. Increasing n-HA concentration from 0 % to 20 % reduced porosity from 80 % to 66 %. Rheological studies indicated that n-HA enhanced the scaffold's strength and mechanical properties without altering gelation temperature. Cellular studies with MG-63 cells showed that n-HA concentration influenced cell viability and mineralization, highlighting the scaffold's potential in bone tissue engineering.

Conductive hydrogels based on tragacanth and silk fibroin containing dopamine functionalized carboxyl-capped aniline pentamer: Merging hemostasis, antibacterial, and anti-oxidant properties into a multifunctional hydrogel for burn wound healing

Hydrogels possessing both conductive characteristics and notable antibacterial and antioxidant properties hold considerable significance within the realm of wound healing and recovery. The object of current study is the development of conductive hydrogels with antibacterial and antioxidant properties, emphasizing their potential for effective wound healing, especially in treating third-degree burns. For this purpose, various conductive hydrogels are developed based on tragacanth and silk fibroin, with variable dopamine functionalized carboxyl-capped aniline pentamer (CAP@DA). The FTIR analysis confirms that the CAP powder was successfully synthesized and modified with DA. The results show that the incorporation of CAP@DA into hydrogels can increase the porosity and swellability of the hydrogels. Additionally, the mechanical and viscoelastic properties of the hydrogels are also improved. The release of vancomycin from the hydrogels is sustained over time, and the hydrogels are effective in inhibiting the growth of Methicillin-resistant Staphylococcus aureus (MRSA). In vitro cell studies of the hydrogels show that all hydrogels are biocompatible and support cell attachment. The hydrogels' tissue adhesiveness yielded a satisfactory hemostatic outcome in a rat-liver injury model. The third-degree burn was created on the dorsal back paravertebral region of the rats and then grafted with hydrogels. The burn was monitored for 3, 7, and 14 days to evaluate the efficacy of the hydrogel in promoting wound healing. The hydrogels revealed treatment effect, resulting in enhancements in wound closure, dermal collagen matrix production, new blood formation, and anti-inflammatory properties. Better results were obtained for hydrogel with increasing CAP@DA. In summary, the multifunctional conducive hydrogel, featuring potent antibacterial properties, markedly facilitated the wound regeneration process.

Enhanced Osteogenic Potential of Noggin Knockout C2C12 Cells on BMP-2 Releasing Silk Scaffolds

The CRISPR/Cas9 mechanism offers promising therapeutic approaches for bone regeneration by stimulating or suppressing critical signaling pathways. In this study, we aimed to increase the activity of BMP-2 signaling through knockout of Noggin, thereby establishing a synergistic effect on the osteogenic activity of cells in the presence of BMP-2. Since Noggin is an antagonist expressed in skeletal tissues and binds to subunits of bone morphogenetic proteins (BMPs) to inhibit osteogenic differentiation, here Noggin expression was knocked out using the CRISPR/Cas9 system. In accordance with this purpose, C2C12 (mouse myoblast) cells were transfected with CRISPR/Cas9 plasmids. Transfection was achieved with Lipofectamine and confirmed with intense fluorescent signals in microscopic images and deletion in target sequence in Sanger sequencing analysis. Thus, Noggin knockout cells were identified as a new cell source for tissue engineering studies. Then, the transfected cells were seeded on highly porous silk scaffolds bearing BMP-2-loaded silk nanoparticles (30 ng BMP-2/mg silk nanoparticle) in the size of 288 ± 62 nm. BMP-2 is released from the scaffolds in a controlled manner for up to 60 days. The knockout of Noggin by CRISPR/Cas9 was found to synergistically promote osteogenic differentiation in the presence of BMP-2 through increased Coll1A1 and Ocn expression and mineralization. Gene editing of Noggin and BMP-2 increased almost 2-fold Col1A1 expression and almost 3-fold Ocn expression compared to the control group. Moreover, transfected cells produced extracellular matrix (ECM) containing collagen fibers on the scaffolds and mineral-like structures were formed on the fibers. In addition, mineralization characterized by intense Alizarin red staining was detected in transfected cells cultured in the presence of BMP-2, while the other groups did not exhibit any mineralized areas. As has been demonstrated in this study, the CRISPR/Cas9 mechanism has great potential for obtaining new cell sources to be used in tissue engineering studies.

Nanoadjuvants: Promising Bioinspired and Biomimetic Approaches in Vaccine Innovation

Adjuvants are the important part of vaccine manufacturing as they elicit the vaccination effect and enhance the durability of the immune response through controlled release. In light of this, nanoadjuvants have shown unique broad spectrum advantages. As nanoparticles (NPs) based vaccines are fast-acting and better in terms of safety and usability parameters as compared to traditional vaccines, they have attracted the attention of researchers. A vaccine nanocarrier is another interesting and promising area for the development of next-generation vaccines for prophylaxis. This review looks at the various nanoadjuvants and their structure-function relationships. It compiles the state-of-art literature on numerous nanoadjuvants to help domain researchers orient their understanding and extend their endeavors in vaccines research and development.

Vancomycin-loaded silk fibroin microspheres in an injectable hydrogel for chronic osteomyelitis therapy

Introduction: Chronic osteomyelitis remains a clinical challenge in orthopedics. Methods: In this study, silk fibroin microspheres (SFMPs) loaded with vancomycin are entrapped in an injectable silk hydrogel to form a vancomycin delivery system for treatment of chronic osteomyelitis. Results and Discussion: Vancomycin showed continuous release from the hydrogel for up to 25 days. The hydrogel shows strong antibacterial activity against both Escherichia coli and Staphylococcus aureus and a long antibacterial duration of 10 days without a decrease in the antibacterial effect. The injection of vancomycin-loaded silk fibroin microspheres entrapped in the hydrogel into the infected site of rat tibia reduced bone infection and improved bone regeneration compared with other treatment groups. Conclusion: Thus, the composite SF hydrogel features a sustained-release profile and good biocompatibility, making it promising for application in osteomyelitis treatment.

Clindamycin phosphate and bone morphogenetic protein-7 loaded combined nanoparticle-graft and nanoparticle-film formulations for alveolar bone regeneration - An in vitro and in vivo evaluation

Commonly utilized techniques for healing alveolar bone destruction such as the use of growth factors, suffering from short half-life, application difficulties, and the ability to achieve bioactivity only in the presence of high doses of growth factor. The sustained release of growth factors through a scaffold-based delivery system offers a promising and innovative tool in dentistry. Furthermore, it is suggested to guide the host response by using antimicrobials together with growth factors to prevent recovery and achieve ideal regeneration. Herein, the aim was to prepare and an in vitro - in vivo evaluation of bone morphogenetic protein 7 (BMP-7) and clindamycin phosphate (CDP) loaded polymeric nanoparticles, and their loading into the alginate-chitosan polyelectrolyte complex film or alloplastic graft to accelerate hard tissue regeneration. PLGA nanoparticles containing CDP and BMP-7, separately or together, were prepared using the double emulsion solvent evaporation technique. Through in vitro assays, it was revealed that spherical particles were homogeneously distributed in the combination formulations, and sustained release could be achieved for >12 weeks with all formulations. Also, results from the micro-CT and histopathological analyses indicated that CDP and BMP-7 loaded nanoparticle-film formulations were more effective in treatment than the nanoparticle loaded grafts.

Poly(β-amino ester) Dual-Drug-Loaded Hydrogels with Antibacterial and Osteogenic Properties for Bone Repair

In this study, we developed a poly(β-amino ester) (PBAE) hydrogel for the double release of vancomycin (VAN) and total flavonoids of Rhizoma Drynariae (TFRD). VAN was covalently bonded to PBAE polymer chains and was released to enhance the antimicrobial effect first. TFRD chitosan (CS) microspheres were physically dispersed in the scaffold, TFRD was released from the microspheres, and osteogenesis was induced subsequently. The scaffold had good porosity (90.12 ± 3.27%), and the cumulative release rate of the two drugs in PBS (pH 7.4) solution exceeded 80%. In vitro antimicrobial assays demonstrated the antibacterial properties of the scaffold against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Besides these, cell viability assays indicated that the scaffold had good biocompatibility. Moreover, alkaline phosphatase and matrix mineralization were expressed more than in the control group. Overall, cell experiments confirmed that the scaffolds have enhanced osteogenic differentiation capabilities. In conclusion, the dual-drug-loaded scaffold with antibacterial and bone regeneration effects is promising in the field of bone repair.

A Comprehensive Review on Silk Fibroin as a Persuasive Biomaterial for Bone Tissue Engineering

Bone tissue engineering (BTE) utilizes a special mix of scaffolds, cells, and bioactive factors to regulate the microenvironment of bone regeneration and form a three-dimensional bone simulation structure to regenerate bone tissue. Silk fibroin (SF) is perhaps the most encouraging material for BTE given its tunable mechanical properties, controllable biodegradability, and excellent biocompatibility. Numerous studies have confirmed the significance of SF for stimulating bone formation. In this review, we start by introducing the structure and characteristics of SF. After that, the immunological mechanism of SF for osteogenesis is summarized, and various forms of SF biomaterials and the latest development prospects of SF in BTE are emphatically introduced. Biomaterials based on SF have great potential in bone tissue engineering, and this review will serve as a resource for future design and research.

Dual-functional composite scaffolds for inhibiting infection and promoting bone regeneration

The treatment of infected bone defects is an intractable problem in orthopedics. It comprises two critical parts, namely that of infection control and bone defect repair. According to these two core tasks during treatment, the ideal approach of simultaneously controlling infection and repairing bone defects is promising treatment strategy. Several engineered biomaterials and drug delivery systems with dual functions of anti-bacterial action and ostogenesis-promotion have been developed and demonstrated excellent therapeutic effects. Compared with the conventional treatment method, the dual-functional composite scaffold can provide one-stage treatment avoiding multiple surgeries, thereby remarkably simplifying the treatment process and reducing the treatment time, overcoming the disadvantages of conventional bone transplantation. In this review, the impaired bone repair ability and its specific mechanisms in the microenvironment of pathogen infection and excessive inflammation were analyzed, providing a theoretical basis for the treatment of infectious bone defects. Furthermore, we discussed the composite dual-functional scaffold composed of a combination of antibacterial and osteogenic material. Finally, a series of advanced drug delivery systems with antibacterial and bone-promoting capabilities were summarized and discussed. This review provides a comprehensive understanding for the microenvironment of infectious bone defects and leading-edge design strategies for the antibacterial and bone-promoting dual-function scaffold, thus providing clinically significant treatment methods for infectious bone defects.

•

Antibacterial and bone-promoting dual-function scaffolds are ideal strategies for treatment of infectious bone defects.

•

The effect of infection on bone repair was summarized in detail from four important aspects.

•

A variety of dual-function scaffolds based on antibacterial and osteogenic materials were discussed.

•

Dual-function drug delivery systems promoting repair of infectious bone defects by locally releasing functional agents.

•

Leading-edge design strategies, challenges and prospects for dual-functional biomaterials were provided.

Silk fibroin scaffolds: A promising candidate for bone regeneration

It remains a big challenge in clinical practice to repair large-sized bone defects and many factors limit the application of autografts and allografts, The application of exogenous scaffolds is an alternate strategy for bone regeneration, among which the silk fibroin (SF) scaffold is a promising candidate. Due to the advantages of excellent biocompatibility, satisfying mechanical property, controllable biodegradability and structural adjustability, SF scaffolds exhibit great potential in bone regeneration with the help of well-designed structures, bioactive components and functional surface modification. This review will summarize the cell and tissue interaction with SF scaffolds, techniques to fabricate SF-based scaffolds and modifications of SF scaffolds to enhance osteogenesis, which will provide a deep and comprehensive insight into SF scaffolds and inspire the design and fabrication of novel SF scaffolds for superior osteogenic performance. However, there still needs more comprehensive efforts to promote better clinical translation of SF scaffolds, including more experiments in big animal models and clinical trials. Furthermore, deeper investigations are also in demand to reveal the degradation and clearing mechanisms of SF scaffolds and evaluate the influence of degradation products.

Dual drug delivery system of teicoplanin and phenamil based on pH-sensitive silk fibroin/sodium alginate hydrogel scaffold for treating chronic bone infection

For effective treatment of infected bone, it is essential to use local drug delivery systems with the ability to deliver both antibiotics and osteoinductive factors. Herein, a pH-sensitive silk fibroin (SF)/sodium alginate (SA) hydrogel scaffolds containing teicoplanin (TEC) and phenamil (PM) loaded SF nanoparticles (PMSFNPS) are introduced for treating chronic osteomyelitis. The TEC and PM showed a sustained- and pH-sensitive release behavior from SF/SA hydrogel. The higher release rate was seen in an alkaline pH in comparison to neutral and acidic pH during 10 days. The eluted TEC maintained its antibacterial activity of >75 % during 35 days and in three different pH values (5.5, 7.4, and 8.5). The cellular study indicated that the scaffolds containing PMSFNPs could promote the cell viability, ALP activity, and matrix mineralization. Moreover, the in vivo effectiveness of hydrogel scaffolds were analyzed with radiography, histological and Immunohistochemistry evaluations. The lower infection and higher regeneration were observed in methicillin-resistant Staphylococcus aureus (MRSA) infected rat bone treated with hydrogel scaffold containing PMSFNPs and TEC compared to other groups. Consequently, this dual-drug delivery system could be a hopeful approach for effective treatment of chronic bone infection.

Erythropoietin, as a biological macromolecule in modification of tissue engineered constructs: A review

In recent years, tissue engineering has emerged as a promising approach to address limitations of organ transplantation. The ultimate goal of tissue engineering is to provide scaffolds that closely mimic the physicochemical and biological cues of native tissues' extracellular matrix. In this endeavor, new generation of scaffolds have been designed that utilize the incorporation of signaling molecules in order to improve cell recruitment, enhance angiogenesis, exert healing activities, and increase the engraftment of the scaffolds. Among different signaling molecules, the role of erythropoietin (EPO) in regenerative medicine is increasingly being appreciated. It is a biological macromolecule which can prevent programed cell death, modulate inflammation, induce cell proliferation, and provide tissue protection in different disease models. In this review, we have outlined and critically analyzed different techniques of scaffolds' modification with EPO or EPO-loaded nanoparticles. We have also explored different strategies for the incorporation of EPO into scaffolds. Non-hematopoietic functions of EPO have also been discussed. Finalizing with detailed discussion surrounding the applications, challenges, and future perspectives of EPO-modified scaffolds in regenerative medicine.

Composite Microgels for Imaging-Monitored Tracking of the Delivery of Vascular Endothelial Growth Factor to Ischemic Muscles

Monitoring the supply of vascular endothelial growth factor (VEGF) to ischemic tissues provides information on its biodistribution and delivery to meet the requirements of therapeutic angiogenesis and tissue engineering applications. We herein report the use of microfluidically generated microgels containing VEGF-conjugated fluorescent carbon dots (CDs) (VEGF-CDs), a gelatin-phenol conjugate, and silk fibroin for imaging-monitored tracking of VEGF delivery to ischemic muscles. An in vitro release study and a bioactivity assay indicated that the VEGF-CDs were released in a sustained manner with high bioactivity. The microgels showed a high angiogenesis potential, along with a strong fluorescent signal, for the chicken chorioallantoic membrane and chick embryo. Imaging and studies of therapeutic modalities of the composite microgels indicated their effective localization in ischemic tissues and sustained VEGF release, which resulted in enhanced therapeutic angiogenesis of ischemic muscles. This work reveals the success of using VEGF-loaded composite polymer microgels for efficient and monitored VEGF delivery by intramuscular administration for ischemic disease treatment.

Osteo-conductive hydrogel scaffolds of poly(vinylalcohol) with silk fibroin particles for bone augmentation: Structural formation and in vitro testing

Bone augmentation is an effective approach to treat patients who have bone loss at the maxillofacial area. In this research, osteo-conductive hydrogel scaffolds of poly(vinylalcohol) (PVA) with silk fibroin particles (SFP) were fabricated. The SFP were formed by dropping a solution of silk fibroin into acetone at different volume ratios (v/v) of silk to acetone: 1:3 (SFP-3), 1:6 (SFP-6), 1:12 (SFP-12), and 1:24 (SFP-24). The various SFP solutions were mixed with a PVA solution before fabrication into hydrogels by freeze-thawing. Afterwards, the hydrogels were freeze-dried to fabricate the scaffolds. The particle size and charge, molecular organization, and morphology of the SFP were characterized and observed with dynamic light scattering, Fourier transform infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy (SEM). The morphologies of the hydrogel scaffolds were observed with SEM. Swelling percentage was used to assess the swelling behavior of the hydrogel scaffolds. The mechanical properties were also tested. The scaffolds were cultured with osteoblast cells to test the biological performance, cell viability and performance, alkaline phosphatase activity, calcium deposition, and total protein. The SFP-24 was the smallest in particle size. PVA hydrogel scaffolds with SFP-24 demonstrated low particle aggregation, good particle distribution within the scaffold, and a lower swelling percentage. PVA hydrogel scaffolds with SFP had higher mechanical stability than scaffolds without the SFP. Furthermore, the PVA hydrogel scaffold with SFP-24 had better biological performance. Finally, the results demonstrated that PVA hydrogel scaffolds with SFP-24 showed good osteo-conductive performance which is promising for bone augmentation.

Turning Toxic Nanomaterials into a Safe and Bioactive Nanocarrier for Co-delivery of DOX/pCRISPR

Hybrid bioactive inorganic-organic carbon-based nanocomposites of reduced graphene oxide (rGO) nanosheets enlarged with multi-walled carbon nanotubes (MWCNTs) were decorated to provide a suitable space for in situ growth of CoNi₂S₄ and green-synthesized ZnO nanoparticles. The ensuing nanocarrier supplied π-π interactions between the DOX drug and a stabilizing agent derived from leaf extracts on the surface of ZnO nanoparticles and hydrogen bonds; gene delivery of (p)CRISPR was also facilitated by chitosan and alginate renewable macromolecules. Also, these polymers can inhibit the potential interactions between the inorganic parts and cellular membranes to reduce the potential cytotoxicity. Nanocomposite/nanocarrier analyses and sustained DOX delivery (cytotoxicity analyses on HEK-293, PC12, HepG2, and HeLa cell lines after 24, 48, and 72 h) were indicative of an acceptable cell viability of up to 91.4 and 78.8% after 48 at low and high concentrations of 0.1 and 10 μg/mL, respectively. The MTT results indicate that by addition of DOX to the nanostructures, the relative cell viability increased after 72 h of treatment; since the inorganic compartments, specifically CoNi₂S₄, are toxic, this is a promising route to increase the bioavailability of the nanocarrier before reaching the targeted cells. Nanosystems were tagged with (p)CRISPR for co-transfer of the drug/genes, where confocal laser scanning microscopy (CLSM) pictures of the 4',6-diamidino-2-phenylindole (DAPI) were indicative of appropriate localization of DOX into the nanostructure with effective cell and drug delivery at varied pH. Also, the intrinsic toxicity of CoNi₂S₄ does not affect the morphology of the cells, which is a breakthrough. Furthermore, the CLSM images of the HEK-293 and HeLa cell displayed effective transport of (p)CRISPR into the cells with an enhanced green fluorescent protein (EGFP) of up to 8.3% for the HEK-293 cell line and 21.4% for the HeLa cell line, a record. Additionally, the specific morphology of the nanosystems before and after the drug/gene transport events, via images by TEM and FESEM, revealed an intact morphology for these biopolymers and their complete degradation after long-time usage.

Nano-adjuvant based on silk fibroin for the delivery of recombinant hepatitis B surface antigen

Nanotechnology has a vital role in vaccine development. Nano-adjuvants, as robust delivery systems, could stimulate immune responses. Using nanoparticles (NPs) in vaccine formulations enhances the target delivery, immunogenicity, and stability of the antigens. Herein, silk fibroin nanoparticles (SFNPs) were used as a nano-adjuvant for delivering recombinant hepatitis B surface antigen (HBsAg). HBsAg was loaded physically and chemically on the surface of SFNPs. The HBsAg-loaded SFNPs had a spherical morphology. The in vitro release studies showed that HBsAg had a continuous and slow release from SFNPs during 56 days. During this time, ∼45.6% and 34.1% HBsAg was released from physical-SFNPs and chemical-SFNPs, respectively. HBsAg-loaded SFNPs were also stable for six months with slight changes in the size, surface charge, and morphology. The results of circular dichroism (CD) and fluorescence spectroscopy indicated that the released HBsAg preserved the native secondary and tertiary structures. The quantitative cellular uptake study also showed that physical-SFNPs were taken up more into J774A.1 macrophage cells than chemical-SFNPs. After 28 and 56 days post-injection, the immunogenicity studies showed that the specific total IgG, IgG1, and IgG2a levels against HBsAg were significantly higher in the physically loaded group than in the chemically loaded group and commercial hepatitis B vaccine. IgG2a levels were detected only in mice immunized with physical-SFNPs. However, the low levels of IL-4 and IFN-γ were produced in all vaccinated groups and differences in mean values were not significant compared with control groups. Results indicated an improvement in the levels of anti-HBsAg IgG in mice immunized with the physical-SFNPs group compared to other groups.

Osteopontin sequence modified mesoporous calcium silicate scaffolds to promote angiogenesis in bone tissue regeneration

Sufficient blood supply remains the key issue to be addressed for an optimal performance of implanted bone tissue engineering scaffolds. Host vessel invasion is limited to a depth of only several hundred micrometers from the scaffold/host interface. In this study, an osteopontin sequenced polypeptide SVVYGLR was grafted into/onto mesoporous calcium silicate (MCS) and then 3D-printed into scaffolds. The peptide motifs can be accessed on the scaffold surfaces and released as well. In vitro studies of human umbilical vein endothelial cells (HUVECs) indicated enhanced cell adhesion and vascular-like structure formation on MCS-SVVYGLR scaffolds. At the same time, human bone marrow stromal cells (hBMSCs) showed enhanced osteogenic differentiation capability and higher expression levels of angiogenic genes and proteins as well. The results of in vivo radial defect repair tests of rabbits showed that more tubular vessels formed throughout the whole MCS-SVVYGLR scaffolds, and therefore, a more homogeneous new bone formation pattern was obtained on MCS-SVVYGLR scaffolds instead of a peripheral bone growth pattern on pure MCS scaffolds by Micro-CT and tissue staining techniques over 3 months. Relative gene and protein expressions in PI3K/AKT and ERK1/2 pathways suggested that the SVVYGLR motif on the MCS scaffold surface could initiate the PI3K/AKT signaling pathway and up-regulate ERK1/2 expression, which positively stimulated VEGF expression, to improve angiogenesis.

Fibroin nanoparticles: a promising drug delivery system

Fibroin is a dominant silk protein that possesses ideal properties as a biomaterial for drug delivery. Recently, the development of fibroin nanoparticles (FNPs) for various biomedical applications has been extensively studied. Due to their versatility and chemical modifiability, FNPs can encapsulate different types of therapeutic compounds, including small and big molecules, proteins, enzymes, vaccines, and genetic materials. Moreover, FNPs are able to be administered both parenterally and non-parenterally. This review summaries basic information on the silk and fibroin origin and characteristics, followed by the up-to-date data on the FNPs preparation and characterization methods. In addition, their medical applications as a drug delivery system are in-depth explored based on several administrative routes of parenteral, oral, transdermal, ocular, orthopedic, and respiratory. Finally, the challenges and suggested solutions, as well as the future outlooks of these systems are discussed.

Inside-outside Ag nanoparticles-loaded polylactic acid electrospun fiber for long-term antibacterial and bone regeneration

Bone infections caused by bacteria during bone graft implantations can impair the ability of bone tissue repair, which is currently a clinical problem. In this study, the electrospinning technique was used to prepare a polylactic acid (PLLA)/silver (Ag) composite fiber, in which the silver nanoparticles (Ag-NPs) were uniformly distributed on the inner surface of PLLA fibers; dopamine (DA) was self-polymerized on the composite fiber surface to construct the adhesive polydopamine (PDA) film and chitosan (CS) was used to regulate Ag⁺ in situ through pulse electrochemical deposition for the construction of a stable Ag-NPs coating (CS/Ag), achieving the steady and slow release of Ag-NPs, therefore accomplishing the construction of a "inside-outside" Ag-NPs-loaded PLLA/Ag@PDA@CS/Ag composite fiber with dual functions of long-lasting antibacterial effect as well as bone regeneration promotion ability. The study results showed that the composite fiber has an excellent antibacterial effect against E. coli and S. aureus, and good osteoinductive and angiogenic properties. In summary, under the dual regulations of the strong adhesion of PDA and CS chelation, the "inside-outside" Ag-NPs-loaded composite fiber was endowed with good physiological stability, long-term antibacterial effect and bone infection inhibition ability, making it a promising bone implant material.

Dual drug delivery system based on pH-sensitive silk fibroin/alginate nanoparticles entrapped in PNIPAM hydrogel for treating severe infected burn wound

Herein, the pH-sensitive vancomycin (VANCO) loaded silk fibroin-sodium alginate nanoparticles (NPs) embedded in poly(N-isopropylacrylamide) (PNIPAM) hydrogel containing epidermal growth factor (EGF) are introduced for treating chronic burn wound infections. The hybrid system was developed to control the release rates of an antibiotic and growth factor for optimal treatment of burn infections. VANCO had a pH responsive release behavior from the nanoparticle (NP) and showed higher release rate in an alkaline pH compared to the neutral pH during 10 d. About 30% of EGF was also released from the hydrogel within 20 d. The released VANCO and EGF preserved their bioactivity more than ∼ 80%. The suitable physico-chemical properties and cellular behaviors of PNIPAM hydrogel supported the proliferation and growth of the fibroblast cells. Furthermore, the higher re-epithelialization with good wound contraction rate, neovascular formation, and expression of transforming growth factor-beta were observed in S. aureus infected rat burn wound by using the hydrogel containing VANCO and EGF compared with untreated wounds and hydrogel alone. The wound infection was also significantly reduced in the groups treated with the hydrogels containing VANCO. Overall, in vitro and in vivo results suggested that developed hybrid system would be a promising construct to treat severe wound infection.

Biomaterials against Bone Infection

Chronic bone infection is considered as one of the most problematic biofilm-related infections. Its recurrent and resistant nature, high morbidity, prolonged hospitalization, and costly medical care expenses have driven the efforts of the scientific community to develop new therapies to improve the standards used today. There is great debate on the management of this kind of infection in order to establish consistent and agreed guidelines in national health systems. The scientific research is oriented toward the design of anti-infective biomaterials both for prevention and cure. The properties of these materials must be adapted to achieve better anti-infective performance and good compatibility, which allow a good integration of the implant with the surrounding tissue. The objective of this review is to study in-depth the antibacterial biomaterials and the strategies underlying them. In this sense, this manuscript focuses on antimicrobial coatings, including the new technological advances on surface modification; scaffolding design including multifunctional scaffolds with both antimicrobial and bone regeneration properties; and nanocarriers based on mesoporous silica nanoparticles with advanced properties (targeting and stimuli-response capabilities).

Optimization of chitosan-based polyelectrolyte nanoparticles for gene delivery, using design of experiment: in vitro and in vivo study

Gene therapy is a novel approach for cancer treatment and investigation for suitable gene delivery systems is remarkable. Here, preparation of a polyelectrolyte complex containing polysaccharides: trimethyl chitosan (TMC) as the positive and hyaluronate (HA), dextran sulfate and alginate as the negative part was studied. The optimized nanoparticles (TMC: between 0.2 and 0.47 mg/ml, HA: 0.35 mg/ml (≈131 nm, nearly full gene loading)) were obtained via primary screening followed by the D-optimal method. In vitro cellular study on the MCF7 cell line confirmed the non-toxicity and high cellular uptake (>90%) of prepared nanoparticles. Notably, in vivo study indicated noticeable tumor uptake of nanoparticles while low accumulation in vital organs such as heart, liver and lungs. Moreover, although a qualitative variable was considered, the applied method restricted the number of runs by selecting spots from the spherical atmosphere. The prepared nanoparticles could be suggested as an efficient and safe delivery system for cancer gene delivery.

Nanomaterials for bone tissue regeneration: updates and future perspectives

Joint replacement and bone reconstructive surgeries are on the rise globally. Current strategies for implants and bone regeneration are associated with poor integration and healing resulting in repeated surgeries. A multidisciplinary approach involving basic biological sciences, tissue engineering, regenerative medicine and clinical research is required to overcome this problem. Considering the nanostructured nature of bone, expertise and resources available through recent advancements in nanobiotechnology enable researchers to design and fabricate devices and drug delivery systems at the nanoscale to be more compatible with the bone tissue environment. The focus of this review is to present the recent progress made in the rationale and design of nanomaterials for tissue engineering and drug delivery relevant to bone regeneration.

Crosslinked-polyvinyl alcohol-carboxymethyl cellulose/ZnO nanocomposite fibrous mats containing erythromycin (PVA-CMC/ZnO-EM): Fabrication, characterization and in-vitro release and anti-bacterial properties

Recently, nanocomposite nanofibers have been extensively used for biomedical applications. It is expected that simultaneous incorporation of antibiotic drugs and ZnO nanoparticles into nanofiber resulted in providing the synergistic anti-bacterial effect. The main aim of the present study is to fabricate polyvinyl alcohol (PVA)/carboxymethyl cellulose (CMC)-ZnO nanocomposite fibrous mats containing erythromycin (EM) drug and crosslink them using 2% glutaraldehyde vapor and 3% AlCl₃ alcoholic solution. The fabricated nanofibers characterized via TGA, FTIR, TEM, and SEM, indicating that the addition of ZnO nanoparticles and EM molecules into the fabricated nanofibers resulted in changing their average diameter. Their anti-bacterial activity was studied against S. aureus and E. coli and found that PVA-CMC/ZnO-EM nanofibers show excellent antimicrobial activity. In-vitro release profile showed that EM release from PVA-CMC/ZnO-EM nanofibers was slowly increased. Sustained drug release profile and excellent anti-bacterial activity of PVA-CMC/ZnO-EM nanofiber indicated that it was an ideal biomaterial for wound dressings.