S,O-Functionalized Metal–Organic Frameworks as Heterogeneous Single-Site Catalysts for the Oxidative Alkenylation of Arenes via C–H activation

In-Flow Heterogeneous Triplet-Triplet Annihilation Upconversion

Photon upconversion based on triplet-triplet annihilation (TTA-UC) is an attractive wavelength conversion with increasing use in organic synthesis in the homogeneous phase; however, this technology has not performed with canonical solid catalysts yet. Herein, a BOPHY dye covalently anchored on silica is successfully used as a sensitizer in a TTA system that efficiently catalyzes Mizoroki-Heck coupling reactions. This procedure has enabled the implementation of in-flow reaction conditions for the synthesis of a variety of aromatic compounds, and mechanistic proof has been obtained by means of transient absorption spectroscopy.

Efficient Electrochemical Lead Detection by a Histidine-Grafted Metal-Organic Framework MOF-808 Electrode Material

As the excessive presence of heavy metals in the environment significantly affects human health, it becomes necessary to develop efficient, selective, and sensitive methods for their detection. In this study, a novel electrochemical sensor for the detection of Pb2+ ions is described. The proposed sensor is based on a glassy carbon electrode (GCE) modified by a thin film of histidine-grafted metal-organic framework (MOF-808-His). The MOF-808 was obtained solvothermally, and then postsynthetically modified by substituting the coordinated acetate with histidinate. By electrochemistry, the MOF-808-His-modified GCE demonstrated high charge selectivity, while electrochemical impedance spectroscopy (EIS) and kinetic studies gave a lower charge transfer resistance (4196 Ω) and a better standard heterogeneous electron transfer rate constant (1.80 × 10-5 cm s-1) on MOF-808-modified GCE. These results indicated a swift and direct electron transfer rate from [Fe(CN)6]3-/4- to the electrode surface. Using square wave anodic stripping voltammetry (SWASV), the rapid and highly sensitive determination of Pb2+ was achieved on MOF-808-His-modified GCE. By optimizing the accumulation-detection parameters including pH of the detection medium, deposition time and potential, and concentration, a remarkable limit of detection (LoD, based on a signal-to-noise ratio of 3) of (1.12 × 10-10 ± 0.10 × 10-10) mol L-1 was obtained, with a sensitivity of (9.6 ± 0.1) μA L μmol-1. After interference and stability studies, the MOF-808-His-modified GCE was applied to the detection of Pb2+ in a tap water sample with a concentration of 10 μmol L-1 Pb2+.

Pd@GO catalyzed stereo- and regio-selective addition of arenes to alkynes and synthesis of coumarins via C-H functionalization

A stereo- and regio-selective addition of arenes to alkynes via C-H bond functionalization has been developed using palladium nanoparticles supported on graphite oxide (Pd@GO) as the reusable catalyst. The prepared catalyst was characterized by various spectroscopic techniques such as FT-IR, TEM, SEM, EDX, P-XRD, and XPS analysis. The thermal stability of the catalyst was established by TGA. The C-H functionalized products were obtained in good to excellent yields (69-92%) at room temperature. The methodology further extended to the synthesis of biologically and pharmaceutically important coumarin molecules from phenols and alkynes. Good to excellent yields of the coumarins (74-92%) were obtained. After the reaction, the catalyst was separated by centrifugation followed by filtration. The recovered catalyst was washed and reused up to five cycles. The advantages of this method are the simple procedure of the catalyst preparation, high catalytic efficiency, high selectivity, good functional group tolerance, low catalyst loading, and gram-scale synthesis.

Selective Methane Oxidation to Acetic Acid Using Molecular Oxygen over a Mono-Copper Hydroxyl Catalyst

Acetic acid is an industrially important chemical, produced mainly via carbonylation of methanol using precious metal-based homogeneous catalysts. As a low-cost feedstock, methane is commercially transformed to acetic acid via a multistep process involving energy-intensive methane steam reforming, methanol synthesis, and, subsequently, methanol carbonylation. Here, we report a direct single-step conversion of methane to acetic acid using molecular oxygen (O₂) as the oxidant under mild conditions over a mono-copper hydroxyl site confined in a porous cerium metal-organic framework (MOF), Ce-UiO-Cu(OH). The Ce-UiO MOF-supported single-site copper hydroxyl catalyst gave exceptionally high acetic acid productivity of 335 mmolg_cat^-1 in 96% selectivity with a Cu TON up to 400 at 115 °C in water. Our spectroscopic and theoretical studies and controlled experiments reveal that the conversion of methane to acetic acid occurs via oxidative carbonylation, where methane is first activated at the copper hydroxyl site via σ-bond metathesis to afford Cu-methyl species, followed by carbonylation with in situ-generated carbon monoxide and subsequent hydrolysis by water. This work may guide the rational design of heterogeneous abundant metal catalysts for the activation and conversion of methane to acetic acid and other valuable chemicals under mild and environmentally friendly reaction conditions.

Mechanistic studies of the palladium-catalyzed S,O-ligand promoted C-H olefination of aromatic compounds

Pd-catalyzed C-H functionalization reactions of non-directed substrates have recently emerged as an attractive alternative to the use of directing groups. Key to the success of these transformations has been the discovery of new ligands capable of increasing both the reactivity of the inert C-H bond and the selectivity of the process. Among them, a new type of S,O-ligand has been shown to be highly efficient in promoting a variety of Pd-catalyzed C-H olefination reactions of non-directed arenes. Despite the success of this type of S,O-ligand, its role in the C-H functionalization processes is unknown. Herein, we describe a detailed mechanistic study focused on elucidating the role of the S,O-ligand in the Pd-catalyzed C-H olefination of non-directed arenes. For this purpose, several mechanistic tools, including isolation and characterization of reactive intermediates, NMR and kinetic studies, isotope effects and DFT calculations have been employed. The data from these experiments suggest that the C-H activation is the rate-determining step in both cases with and without the S,O-ligand. Furthermore, the results indicate that the S,O-ligand triggers the formation of more reactive Pd cationic species, which explains the observed acceleration of the reaction. Together, these studies shed light on the role of the S,O-ligand in promoting Pd-catalyzed C-H functionalization reactions.

A highly robust cluster-based indium(III)-organic framework with efficient catalytic activity in cycloaddition of CO2 and Knoevenagel condensation

The efficient catalytic performance displayed by MOFs is decided by an appropriate charge/radius ratio of defect metal sites, large enough solvent-accessible channels and Lewis base sites capable of polarizing substrate molecules. Herein, the solvothermal self-assembly led to a highly robust nanochannel-based framework of {[In₄(CPDD)₂(μ₃-OH)₂(DMF)(H₂O)₂]·2DMF·5H₂O}_n (NUC-66) with a 56.8% void volume, which is a combination of a tetranuclear cluster [In₄(μ₃-OH)₂(COO)₁₀(DMF)(H₂O)₂] (abbreviated as {In₄}) and a conjugated tetracyclic pentacarboxylic acid ligand of 4,4'-(4-(4-carboxyphenyl)pyridine-2,6-diyl)diisophthalic acid (H₅CPDD). To the best of our knowledge, NUC-66 is a rarely reported {In₄}-based 3D framework with embedded hierarchical triangular-microporous (2.9 Å) and hexagonal-nanoporous (12.0 Å) channels, which are shaped by six rows of {In₄} clusters. After solvent exchange and vacuum drying, the surface of nanochannels in desolvated NUC-66a is modified by unsaturated In³⁺ ions, N_pyridine atoms and μ₃-OH groups, all of which display polarization ability towards polar molecules due to their Lewis acidity or basicity. The catalytic experiments performed showed that NUC-66a had high catalytic activity in the cycloaddition reactions of epoxides with CO₂ under mild conditions, which should be ascribed to its structural advantages including nanoscale channels, rich bifunctional active sites, large surface areas and chemical stability. Moreover, NUC-66a, as a heterogeneous catalyst, could greatly accelerate the Knoevenagel condensation reactions of aldehydes and malononitrile. Hence, this work confirms that the development of rigid nanoporous cluster-based MOFs built on metal ions with a high charge and large radius ratio will be more likely to realize practical applications, such as catalysis, adsorption and separation of gas, etc.

Oxidative carbonylation of N-protected indoles by Rh(III)-zeolites

The oxidative carbonylation of N-protected indoles was investigated to directly synthesize indole-3-carboxylic acids. Using Rh(III)-zeolites as heterogeneous catalysts, the single-site Rh-species reach unprecedented activities (>100 turnovers), while the metal is readily recovered after reaction. X-ray absorption spectroscopy (XAS) provided evidence for site-isolation of Rh(III) species on the zeolite.

Single-ion chelation strategy for synthesis of monodisperse Pd nanoparticles anchored in MOF-808 for highly efficient hydrogenation and cascade reactions

Ultrafine Pd nanoparticles are prepared using a single-ion precursor on a MOF-808 carrier. The ligand 2,3-pyrazinedicarboxylic acid (Pza) is dispersed in porous MOF-808 via grafting on formic acid sites, and thus Pd²⁺ ions are chelated by Pza to form a new single-ion precursor Pd@MOF-808-Pza. Then a Pd-nano@MOF-808-Pza catalyst is prepared by direct reduction of this precursor using NaBH₄. Material characterization reveals the homogeneous dispersion of 3-6 nm Pd nanoparticles within the MOF-808 matrix. Pd-nano@MOF-808-Pza exhibits excellent catalytic activity in the hydrogenation of unsaturated nitrogen-containing compounds, and other typical reactions, such as the Knoevenagel condensation, Suzuki/Heck cross-coupling, and hydrogen tandem reactions. In addition, density functional theory (DFT) calculations are carried out to elucidate the chelation of Pd²⁺ ions by Pza on MOF-808 and propose mechanisms of hydrogenation reactions. This work provides an effective reduction catalyst, and more importantly, a single-ion chelation strategy for design and synthesis of metal supported catalysts.

Looking deep into C-H functionalization: the synthesis and application of cyclopentadienyl and related metal catalysts

Metal catalyzed C-H functionalization offers a versatile platform for methodology development and a wide variety of reactions now exist for the chemo- and site-selective functionalization of organic molecules. Cyclopentadienyl-metal (CpM) complexes of transition metals and their correlative analogues have found widespread application in this area, and herein we highlight several key applications of commonly used transition-metal Cp-type catalysts. In addition, an understanding of transition metal Cp-type catalyst synthesis is important, particularly where modifications to the catalyst structure are required for different applications, and a summary of this aspect is given.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Coordinatively Unsaturated Hf-MOF-808 Prepared via Hydrothermal Synthesis as a Bifunctional Catalyst for the Tandem N-Alkylation of Amines with Benzyl Alcohol

The modulated hydrothermal (MHT) synthesis of an active and selective Hf-MOF-808 material for the N-alkylation reaction of aniline with benzyl alcohol under base-free mild reaction conditions is reported. Through kinetic experiments and isotopically labeled NMR spectroscopy studies, we have demonstrated that the reaction mechanism occurs via borrowing hydrogen (BH) pathway, in which the alcohol dehydrogenation is the limiting step. The high concentration of defective -OH groups generated on the metallic nodes through MHT synthesis enhances the alcohol activation, while the unsaturated Hf⁴⁺, which acts as a Lewis acid site, is able to borrow the hydrogen from the methylene position of benzyl alcohol. This fact makes this material at least 14 times more active for the N-alkylation reaction than the material obtained via solvothermal synthesis. The methodology described in this work could be applied to a wide range of aniline and benzyl alcohol derivates, showing in all cases high selectivity toward the corresponding N-benzylaniline product. Finally, Hf-MOF-808, which acts as a true heterogeneous catalyst, can be reused in at least four consecutive runs without any activity loss.

Photoswitchable Zirconium MOF for Light-Driven Hydrogen Storage

Here, we report a new photosensitive metal–organic framework (MOF) that was constructed via the modification of UiO-66-NH₂ with diarylethene molecules (DAE, 4-(5-Methoxy-1,2-dimethyl-1H-indol-3-yl)-3-(2,5-dimethylthiophen-3-yl)-4-furan-2,5-dione). The material that was obtained was a highly crystalline porous compound. The photoresponse of the modified MOF was observed via UV–Vis and IR spectroscopy. Most of the DAE molecules inside of the UiO-66-pores had an open conformation after synthesis. However, the equilibrium was able to be shifted further toward an open conformation using visible light irradiation with a wavelength of 520 nm. Conversely, UV-light with a wavelength of 450 nm initiated the transformation of the photoresponsive moieties inside of the pores to a closed modification. We have shown that this transformation could be used to stimulate hydrogen adsorption–desorption processes. Specifically, visible light irradiation increased the H₂ capacity of modified MOF, while UV-light decreased it. A similar hybrid material with DAE moieties in the UiO-66 scaffold was applied for hydrogen storage for the first time. Additionally, the obtained results are promising for smart H₂ storage that is able to be managed via light stimuli.

Tris-NHC-propagated self-supported polymer-based Pd catalysts for heterogeneous C-H functionalization

Three-dimensionally propagated imidazolium-containing mesoporous coordination polymer and organic polymer-based platforms were successfully exploited to develop single-site heterogenized Pd-NHC catalysts for oxidative arene/heteroarene C-H functionalization reactions. The catalysts were efficient in directed arene halogenation, and nondirected arene and heteroarene arylation reactions. High catalytic activity, excellent heterogeneity and recyclability were offered by these systems making them promising candidates in the area of heterogeneous C-H functionalization, where efficient catalysts are still scarce.

Tailoring Lewis/Brønsted acid properties of MOF nodes via hydrothermal and solvothermal synthesis: simple approach with exceptional catalytic implications

The Lewis/Brønsted catalytic properties of the Metal-Organic Framework (MOF) nodes can be tuned by simply controlling the solvent employed in the synthetic procedure. In this work, we demonstrate that Hf-MOF-808 can be prepared from a material with a higher amount of Brønsted acid sites, via modulated hydrothermal synthesis, to a material with a higher proportion of unsaturated Hf Lewis acid sites, via modulated solvothermal synthesis. The Lewis/Brønsted acid properties of the resultant metallic clusters have been studied by different characterization techniques, including XAS, FTIR and NMR spectroscopies, combined with a DFT study. The different nature of the Hf-MOF-808 materials allows their application as selective catalysts in different target reactions requiring Lewis, Brønsted or Lewis-Brønsted acid pairs.

Catalytic C-H Functionalization of Unreactive Furan Cores in Bio-Derived Platform Chemicals

C-H functionalization is one of the most convenient and powerful tools in the arsenal of modern chemistry, deservedly nominated as the "Holy Grail" of organic synthesis. A frequent disadvantage of this method is the need for harsh reaction conditions to carry out transformations of inert C-H bonds, which limits the possibility of its use for modifying less stable substrates. Biomass-derived furan platform chemicals, which have a relatively unstable aromatic furan core and highly reactive side chain substituents, are extremely promising and valuable organic molecules that are currently widely used in a variety of research and industrial fields. The high sensitivity of furan derivatives to acids, strong oxidants, and high temperatures significantly limits the use of classical methods of C-H functionalization for their modification. New methods of catalytic functionalization of non-reactive furan cores are urgently required to obtain a new generation of materials with controlled properties and potentially bioactive substances.

An ultrastable olefin-linked covalent organic framework for photocatalytic decarboxylative alkylations under highly acidic conditions

An ultrastable olefin-linked covalent organic framework 2D-COF-2 offers an alternative heterogeneous photocatalyst for photocatalytic decarboxylative alkylations, exhibiting impressive effciency, sustainabilty and promising industrial potential.

Heterogeneous Single-Site Catalysts for C-H Activation Reactions: Pd(II)-Loaded S,O-Functionalized Metal Oxide-Bisphosphonates

Heterogeneous single-site catalysts contain spatially isolated, well-defined active sites. This allows not only their easy recovery by solid-liquid separation but also the detailed active site design similar to homogeneous catalysts. Here, heterogeneous Pd(II) single-site catalysts were assembled, based on mesoporous metal oxide-bisphosphonate materials as supports. This new family of hybrid organic-inorganic materials with tunable porosity was further functionalized with thioether ligands containing S,O-binding sites that enhance the activity of Pd(II) for C-H activation reactions. The structures of the resulting Pd(II) single-site catalysts were carefully analyzed via solid-state NMR spectroscopy, via texture analysis by N₂ physisorption, infrared spectroscopy, and transmission electron microscopy. Furthermore, the immediate environment of the isolated Pd(II) active sites was studied with X-ray absorption spectroscopy. A clear relationship between the thioether ligand surface density and catalyst activity could be established. Significantly higher yields were obtained using highly porous metal oxide-bisphosphonate materials as supports compared to materials with lower porosities, such as conventional metal oxides, indicating that the high surface area facilitates the presence of isolated, well-accessible S,O-supported Pd(II) active sites. A wide scope of model substrates, including industrially relevant arenes, can be converted with high yields by the optimal heterogeneous Pd catalyst.

Pd-Catalyzed Intermolecular Dehydrogenative Heck Reactions of Five-Membered Heteroarenes

The Pd-mediated cross-coupling of (hetero)arenes with alkenes may be an effective method for the formation of a C–C bond from two C–H bonds. Discovered by Fujiwara and co-workers in 1967, this reaction led to a number of reports that we firstly highlighted in 2011 (review with references till June 2010) and for which, we retained the name “dehydrogenative Heck reaction”. The topic, especially the reactions of five-membered heteroarenes, has been the subject of intensive research over the last ten years. The present review is limited to these dehydrogenative Heck reactions published since 2010, underlining the progress of the procedures.

Spectroscopy, microscopy, diffraction and scattering of archetypal MOFs: formation, metal sites in catalysis and thin films

A comprehensive overview of characterization tools for the analysis of well-known metal–organic frameworks and physico-chemical phenomena associated to their applications.

Organic synthesis of high added value molecules with MOF catalysts

Recent examples of organic synthesis of fine chemicals and pharmaceuticals in confined spaces of MOFs are highlighted and compared with silica-based ordered porous solids, such as zeolites or mesoporous (organo)silica. These heterogeneous catalysts offer the possibility of stabilizing the desired transition states and/or intermediates during organic transformations of functional groups and (C-C/C-N) bond forming steps towards the desired functional high added value molecular scaffolds. A short introduction on zeolites, mesoporous silica and metal-organic frameworks is followed by relevant applications in which confined active sites in the pores promote single or multi-step organic synthesis of industrially relevant molecules. A critical discussion on the catalytic performances of the different types of hybrid inorganic-organic catalysts in the synthesis of O- and N-containing acyclic and heterocyclic molecules has been presented.