A NHC-Silyliumylidene Cation for Catalytic N-Formylation of Amines Using Carbon Dioxide

Low-valent Main-group Catalysis under Ambient Conditions using a Germylene Cation

Catalysis using low-valent main-group compounds is usually done under inert conditions; no example of such catalysis has been doable entirely in ambient conditions until now. This aspect is addressed in this work through an air- and water-stable germylene cation [DPMGe][(OH)B(C6F5)3] (2) (DPM=dipyrromethene); it efficiently catalyzes aldehyde and ketone hydrosilylations under ambient conditions. Detailed theoretical studies reveal that compound 2's stability is bolstered by the interaction between the anion and germanium's frontier orbitals. However, the detachment of the anion (in the solution) alters the capability of compound 2 to render exceptional catalytic efficiency. Compound 2 was synthesized under ambient conditions by the equimolar reaction of DPMGeOH (1) with B(C6F5)3.

Highly selective customized reduction products for hydrogenation of CO2-derived urea derivatives or carbamates

Catalytic hydrogenation of CO2-derived urea derivatives or carbamates provides an indirect and efficient solution for the chemical transformation of CO2 under mild conditions, avoiding the high temperatures and pressure required for direct catalysis to overcome the thermodynamic energy barrier and the low yield of the targeted product. However, the reported catalyst systems focus mainly on the preparation of one specific product, and switching the product type requires external acid/base additives, which limits the development of this protocol. Here, we report a promising route for the hierarchical reduction of CO2-derived urea derivatives or carbamates using an Ir-based PNP pincer catalyst system, enabling the selective production of specific chemicals (methanol, formamides, N-methylamines, or N,N-dimethylamines) for the first time by altering reaction conditions, especially the reaction temperature. This work demonstrates the significant potential of hydrogenation of urea derivatives or carbamates for the indirect conversion of CO2 to valuable chemicals and fuels, providing a facile temperature-dependent product-switching strategy in one catalytic system.

Effective Reduction of CO2 with Aromatic Amines into N-Formamides Triggered by Noble-Free Metal-Organic Framework Catalysts Under Mild Conditions

The reductive transformation of carbon dioxide (CO2) into high-valued N‑formamides matches well with the atom economy and the sustainable development intention. Nevertheless, developing a noble-free metal catalyst under mild reaction conditions is desirable and challenging. Herein, a caged metal-organic framework (MOFs) [H2N(CH3)2]2{[Ni3(µ3-O)(XN)(BDC)3]·6DMF}n (1) (XN = 6″-(pyridin-4-yl)-4,2″:4″,4″'-terpyridine), H2BDC = terephthalic acid) is harvested, presenting high thermal and chemical stabilities. Catalytic investigation reveals that 1 as a renewable noble-free MOFs catalyst can catalyze the CO2 reduction conversion with aromatic amines tolerated by broad functional groups at least ten times, resulting in various formamides in excellent yields and selectivity under the mildest reaction system (room temperature and 1 bar CO2). Density functional theory (DFT) theoretical studies disclose the applicable reaction path, in which the CO2 hydrosilylation process is initiated by the [Ni3] cluster interaction with CO2 via η2-C, O coordination mode. This work may open up an avenue to seek high-efficiency noble-free catalysts in CO2 chemical reduction into high value-added chemicals.

Silyliumylidene Ion Stabilized by Two σ-Donating Ni(0)- and Pd(0)-Fragments

A silyliumylidene ion 2 stabilized by two σ-donating Ni(0)- and Pd(0)-fragments was successfully synthesized. Due to the σ-donation of M→Si interactions, 2 presents a pyramidalized cationic silicon center with a localized lone pair. The additional coordination of basic Pd(0) fragment to the mono-Ni(0)-stabilized silyliumylidene 1 results in a higher HOMO level and an unchanged HOMO-LUMO gap and thus, 2 remains highly reactive. Interestingly, the coordination mode at the Si center is closely related to the nature of M-ligands. Indeed, the donor/donor-stabilized silyliumylidene ion 2 has been transformed into a donor/acceptor-stabilized ion 13, featuring a trigonal planar Si center with a vacant orbital, just via a ligand exchange reaction from PCy3/NHC toward PMe3.

Applications of low-valent compounds with heavy group-14 elements

Over the last two decades, the low-valent compounds of group-14 elements have received significant attention in several fields of chemistry owing to their unique electronic properties. The low-valent group-14 species include tetrylenes, tetryliumylidene, tetrylones, dimetallenes and dimetallynes. These low-valent group-14 species have shown applications in various areas such as organic transformations (hydroboration, cyanosilylation, N-functionalisation of amines, and hydroamination), small molecule activation (e.g. P4, As4, CO2, CO, H2, alkene, and alkyne) and materials. This review presents an in-depth discussion on low-valent group-14 species-catalyzed reactions, including polymerization of rac-lactide, L-lactide, DL-lactide, and caprolactone, followed by their photophysical properties (phosphorescence and fluorescence), thin film deposition (atomic layer deposition and vapor phase deposition), and medicinal applications. This review concisely summarizes current developments of low-valent heavier group-14 compounds, covering synthetic methodologies, structural aspects, and their applications in various fields of chemistry. Finally, their opportunities and challenges are examined and emphasized.

Highly Efficient Thiolate-Based Ionic Liquid Catalysts for Reduction of CO2: Selective N-Functionalization of Amines to Form N-Formamides and N-Methylamines

Developing efficient catalysts to convert CO2 into value-added chemicals is valuable for reducing carbon emissions. Herein, a kind of novel thiolate-based ionic liquid with sulfur as the active site was designed and synthesized, which served as highly efficient catalyst for the reductive N-functionalization of CO2 by amines and hydrosilane. By adjusting the CO2 pressure, various N-formamides and N-methylamines were selectively obtained in high yields. Remarkably, at the catalyst loading of 0.1 mol %, the N-formylation reaction of N-methylaniline exhibited an impressive turnover frequency (TOF) up to 600 h-1, which could be attributed to the roles of the ionic liquids in activating hydrosilane and amine. In addition, control experiments and NMR monitoring experiments provided evidence that the reduction of CO2 by hydrosilane yielded formoxysilane intermediates that subsequently reacted with amines to form N-formylated products. Alternatively, the formoxysilane intermediates could further react with hydrosilane and amine to produce 4-electron-reduced aminal products. These aminal products served as crucial intermediates in the N-methylation reactions.

Tetryliumylidene ions in synthesis and catalysis

Tetryliumylidene ions ([R-E:]+), recognised for their intriguing electronic properties, have attracted considerable interest. These positively charged species, with two vacant p-orbitals and a lone pair at the E(ii) centre (E = Si, Ge, Sn, Pb), can be viewed as the combination of tetrylenes (R2E:) and tetrylium ions ([R3E]+), which makes them potent Lewis ambiphiles. Such electronic features highlight the potential of tetryliumylidenes for single-site small molecule activation and transition metal-free catalysis. The effective utilisation of the electrophilicity and nucleophilicity of tetryliumylidenes is expected to stem from appropriate ligand choice. For most of the isolated tetryliumylidenes, electron donor- and/or kinetic stabilisation is necessary. This minireview highlights the developments in tetryliumylidene syntheses and the progress of research towards their reactivity and applications in catalytic reactions.

Catalytic hydroboration of aldehydes and ketones with an electron-rich acyclic metallasilylene

The application of main group metal complexes in catalytic reactions is of increasing interest. Here we show that the electron-rich, acyclic metallasilylene L'(Cl)GaSiL C (L' = HC[C(Me)NDipp]2, Dipp = 2,6-iPr2C6H3; L = PhC(NtBu)2) acts as a precatalyst in the hydroboration of aldehydes with HBPin. Mechanistic studies with iso-valeraldehyde show that silylene C first reacts with the aldehyde with [2 + 1] cycloaddition in an oxidative addition to the oxasilirane 1, followed by formation of the alkoxysilylene LSiOCH[Ga(Cl)L']CH2CHMe2 (2), whose formation formally results from a reductive elimination reaction at the Si center. Alkoxysilylene 2 represents the active hydroboration catalyst and shows the highest catalytic activity with n-hexanal (reaction time: 40 min, yield: >99%, TOF = 150 h-1) at room temperature with a catalytic load of only 1 mol%. Furthermore, the hydroboration reaction catalysed by alkoxysilylene 2 is a living reaction with good chemoselectivity. Quantum chemical calculations not only provide mechanistic insights into the formation of alkoxysilylene 2 but also show that two completely different hydroboration mechanisms are possible.

Switching the hydrogenation selectivity of urea derivatives via subtly tuning the amount and type of additive in the catalyst system

Catalytic hydrogenation of urea derivatives is considered to be one of the most feasible methods for indirect reduction functionalization of CO2 and synthesis of valuable chemicals and fuels. Among value-added products, methylamines, formamides and methanol are highly attractive as important industrial raw materials. Herein, we report the highly selective catalytic hydrogenation of urea derivatives to N-monomethylamines for the first time. More importantly, two- and six-electron reduction products can be switched on/off by subtly tuning 0.5 mol% KOtBu (2% to 1.5%): when the molar ratio of KOtBu/(PPh3)3RuCl2 exceeds 2.0, it is favorable for the formation of two-electron reduction products (N-formamides), while when it is below 2.0, the two-electron reduction products are further hydrogenated to six-electron reduction products (N-monomethylamines and methanol). Furthermore, changing the type of additive can also regulate this interesting selectivity. Control experiments showed that this selectivity is achieved by regulating the acid-base environment of the reaction to control the fate of the common hemiaminal intermediate. A feasible mechanism is proposed based on mechanistic experiments and characterization. This method has the advantages of being simple, universal and highly efficient, and opens up a new synthesis strategy for the utilization of renewable carbon sources.

A supported pyridylimine-cobalt catalyst for N-formylation of amines using CO2

N-Formylation of amines with CO2 as a cheap and non-toxic C1-feedstock and hydrosilane reducing agent is a practical and environment friendly method to synthesize formamides. This study describes an efficient and chemoselective mono-N-formylation of amines using CO2 and phenylsilane under mild conditions using a porous metal-organic framework (MOF)-supported single-site cobalt catalyst (pyrim-UiO-Co). The pyrim-UiO-Co MOF has a UiO-topology, and its organic linkers bear a pyridylimine ligated Co catalytic moiety. A wide range of aliphatic and aromatic amines are transformed into desired N-formamides in moderate to excellent yields under 1-5 bar CO2. Pyrim-UiO-Co is tolerant to various functional groups and could be recycled and reused at least 10 times. Mechanistic investigation using kinetic, spectroscopic and density functional theory studies suggests that the formylation of benzylamine proceeds sequentially via oxidative addition of PhSiH3 and CO2 insertion, followed by a turn-over limiting reaction with an amine. Our work highlights the importance of MOF-based Earth-abundant metal catalysts for the practical and eco-friendly synthesis of fine chemicals using cheap feedstocks.

NHC-Silyliumylidene Cation-Catalyzed Hydroboration of Isocyanates with Pinacolborane

The low-oxidation-state silicon-catalyzed hydroboration of isocyanates with pinacolborane (HBpin) using the NHC-silyliumylidene cation catalyst [(IMe)2SiH]I (1, IMe = :C{N(Me)C(Me)}2) is described. In the catalysis, the Si lone pair electrons activate isocyanates, and the latter react with HBpin to form N-boryl formamides at room temperature. Catalyst 1 further activates N-boryl formamides at 70 °C, the intermediates of which react with HBpin to form N-boryl methylamines and (pinB)2O.

Decarboxylative N-Formylation of Amines with Glyoxylic Acid Promoted by H2O2

A novel method for the synthesis of formamides through the decarboxylative N-formylation of amines with glyoxylic acid has been developed. This transformation provides an efficient protocol for the synthesis of various formamides with moderate to excellent yields, and it can accommodate a wide range of functional groups under metal free and base free conditions. In addition, the large-scale experiments and high chemoselectivity have shown great potential application of this strategy.

Cooperative Bond Activation and Catalytic CO2 Functionalization with a Geometrically Constrained Bis(silylene)-Stabilized Borylene

Metal-ligand cooperativity has emerged as an important strategy to tune the reactivity of transition-metal complexes for the catalysis and activation of small molecules. Studies of main-group compounds, however, are scarce. Here, we report the synthesis, structural characterization, and reactivity of a geometrically constrained bis(silylene)-stabilized borylene. The one-pot reaction of [(SiNSi)Li(OEt₂)] (SiNSi = 4,5-bis(silylene)-2,7,9,9-tetramethyl-9H-acridin-10-ide) with 1 equiv of [BBr₃(SMe₂)] in toluene at room temperature followed by reduction with 2 equiv of potassium graphite (KC₈) leads to borylene [(SiNSi)B] (1), isolated as blue crystals in 45% yield. X-ray crystallography shows that borylene (1) has a tricoordinate boron center with a distorted T-shaped geometry. Computational studies reveal that the HOMO of 1 represents the lone pair orbital on the boron center and is delocalized over the Si-B-Si unit, while the geometric perturbation significantly increases its energy. Borylene (1) shows single electron transfer reactivity toward tris(pentafluorophenyl)borane (B(C₆F₅)₃), forming a frustrated radical pair [(SiNSi)B]^•+[B(C₆F₅)₃]^•-, which can be trapped by its reaction with PhSSPh, affording an ion pair [(SiNSi)BSPh][PhSB(C₆F₅)₃] (3). Remarkably, the cooperation between borylene and silylene allows the facile cleavage of the N-H bond of aniline, the P-P bond in white phosphorus, and the C═O bond in ketones and carbon dioxide, thus representing a new type of main-group element-ligand cooperativity for the activation of small molecules. In addition, 1 is a strikingly effective catalyst for carbon dioxide reduction. Computational studies reveal that the cooperation between borylene and silylene plays a key role in the catalytic chemical bond activation process.

Labile Base-Stabilized Silyliumylidene Ions. Non-Metallic Species Capable of Activating Multiple Small Molecules

Several base-stabilized silyliumylidene ions (2 and 3) with different ligands were synthesized. Their behaviour appeared strongly dependent on the nature of ligand. Indeed, in contrast to the poorly reactive silyliumylidene ions 3 c,d stabilized by strongly donating ligands (DMAP, NHC), the silylene- and sulfide-supported one (2-H and 3 a) exhibits higher reactivity toward various small molecules. Furthermore, their capability to successively activate multiple small molecules was clearly demonstrated by processes involving successive reactions with silane/formamide, CO2 and H2 . Moreover, HBPin adduct of 3 a (8-C) catalyzes the hydroboration of pyridine. Of particular interest, silylene-supported silyliumylidene complex 2-H is one of the rare species able to activate two H2 molecules.

MOF-Incorporated Binuclear N-Heterocyclic Carbene-Cobalt Catalyst for Efficient Conversion of CO2 to Formamides

Environmental problem caused by carbon emission is of widespread concern. Involving CO₂ as C₁ resource into chemical synthesis is one of the most attractive ways for carbon recycling. Herein, the first example of host-guest composites featuring metal-organic framework (MOF)-encapsulated binuclear N-heterocyclic carbene (NHC) complex, Co₂ @MIL101, was developed with the molecularly dispersed [Co(IPr)Br]₂ (μ-Br)₂ (Co₂ ) loading in the cage of MIL-101(Cr) via a "ligand-in-dimer-trap" strategy, which was comprehensively investigated through various techniques including synchrotron X-ray absorption, electron microscopy, X-ray diffraction, solid-state nuclear magnetic resonance spectroscopy, and others. The noble-metal-free double-sites catalyst Co₂ @MIL101 exhibited promising stability, activity, efficiency, reusability, and substrate adaptability for converting CO₂ into various formamides with amines and hydrosilanes and achieved the best performance for one of the most useful formamides, N-methyl-N-phenylformamide (MFA), among the recyclable catalysts at ambient conditions, providing a reliable approach to successfully unify the advantages of both homo- and heterogeneous catalysts. Density functional theory calculations were applied to illustrate the superior activity of the binuclear NHC complex center as double-sites catalyst toward the activation of CO₂ .

Iminophosphonamido-Supported Plumbylenes and Plumbyliumylidenes: Synthesis and Properties

A series of low-valent lead(II) species, i.e., plumbylenes and plumbyliumylidenes supported by an N,N'-di-tert-butyliminophosphonamide ligand, have been synthesized. Chloroplumbylene [Ph₂P(N^tBu)₂PbCl] (1) was readily prepared by the reaction of the corresponding lithium iminophosphonamide and PbCl₂ in THF. The substitution reaction of 1 with KN(SiMe₃)₂ in THF afforded the corresponding aminoplumbylene [Ph₂P(N^tBu)₂PbN(SiMe₃)₂] (2) in the form of colorless crystals. The structures of these plumbylenes in the solid state and in solution were exhaustively characterized using multinuclear NMR spectroscopy and X-ray diffraction analysis. In the crystalline state, 1 adopts a nearly linear polymeric structure in the direction of the c axis via Pb-Cl bonds, with alternating four-membered PbN₂P rings. The chloride-abstraction reaction of 1 using Na[B(C₆F₅)₄] in fluorobenzene proceeded efficiently at ambient temperature to furnish plumbyliumylidene [Ph₂P(N^tBu)₂Pb:]⁺ (3⁺), which was isolated as the air-sensitive yellow borate salt 3[B(C₆F₅)₄]. Plumbyliumylidene 3[B(C₆F₅)₄] acts as a Lewis acid catalyst for the hydroboration of benzophenone and benzaldehyde at catalyst loadings of as low as 0.1 mol % under ambient conditions. Furthermore, the details of the reaction mechanism are discussed on the basis of the results of DFT calculations.

Synthesis, Characterization and Reactivity of a σ-Donating Ni0 -Stabilized Silyliumylidene Ion

The synthesis of a silyliumylidene cation complex 2 stabilized by a Ni0 -based donating ligand is reported. Experimental and theoretical studies demonstrate that the highly electrophilic SiII center is stabilized by a dative Ni→Si σ-interaction and π-donations from the amino- and Ni-moieties. Due to the energetically close frontier orbitals localized on the Si and Ni atoms, complex 2 presents a competitive reactivity at Si and Ni sites.

CO2 -Promoted Direct Acylation of Amines and Phenols by the Activation of Inert Thioacid Salts

Herein a carbon dioxide-promoted synthetic approach for the direct amidation between unactivated thioacid salts and amines under mild conditions was developed for a wide range of substrates. The method afforded amides in good to excellent yields under transition-metal-free and activation-reagent-free conditions, in sharp contrast to early methodologies on amide synthesis based on transition-metal catalysis. The method offered a greener and transition metal-free protocol applicable to pharmaceuticals preparations. Phenolic compounds were also found to be suitable acylation substrates with potassium thiosulfide KHS as the only byproduct. Moreover, this approach was applied to amide synthesis of valuable bio-active molecules such as moclobemide, melatonin, and a fungicide. Insights into the reaction mechanism involving carbon dioxide were provided through NMR spectroscopy and computational calculations. A plausible mechanism was proposed that involves weak interactions between carbon dioxide and potassium thioacetate in a dynamic equilibrium state formation of a six-membered ring.

Metal-Free, Rapid, and Highly Chemoselective Reduction of Aromatic Nitro Compounds at Room Temperature

In this study, we developed a metal-free and highly chemoselective method for the reduction of aromatic nitro compounds. This reduction was performed using tetrahydroxydiboron [B₂(OH)₄] as the reductant and 4,4'-bipyridine as the organocatalyst and could be completed within 5 min at room temperature. Under optimal conditions, nitroarenes with sensitive functional groups, such as vinyl, ethynyl, carbonyl, and halogen, were converted into the corresponding anilines with excellent selectivity while avoiding the undesirable reduction of the sensitive functional groups.

N-Formylation of amines utilizing CO2 by a heterogeneous metal–organic framework supported single-site cobalt catalyst

Single-site cobalt-hydride supported on oxo-nodes of a porous aluminium metal–organic framework is a chemoselective and reusable catalyst for N-formylation of amines using CO2.

An NHC-Stabilised Phosphinidene for Catalytic Formylation: A DFT-Guided Approach

In recent years, the applications of low-valent main group compounds have gained momentum in the field of catalysis. Owing to the accessibility of two lone pairs of electrons, NHC-stabilised phosphinidenes have been found to be excellent Lewis bases; however, they cannot yet be used as catalysts. Herein, an NHC-stabilised phosphinidene, 1,3-dimethyl-2-(phenylphosphanylidene)-2,3-dihydro-1H imidazole (1), for the activation of CO₂ is reported.A closer inspection of the CO₂ activation process by DFT calculations along with intrinsic bond orbital analysis shows that phosphinidene is associated with phenylsilane through a noncovalent π-π interaction between two phenyl rings which activates the Si-H bond facilitating hydride transfer to the CO₂ molecule. Detailed DFT studies along with spectroscopic experiments were combined to understand the mechanism of CO₂ activation and its catalytic reductive functionalisation leading to the formylation of a range of chemically inert primary amides under mild reaction conditions.

Catalyst free N-formylation of aromatic and aliphatic amines exploiting reductive formylation of CO2 using NaBH4

Herein, we report a sustainable approach for N-formylation of aromatic as well as aliphatic amines using sodium borohydride and carbon dioxide gas. The developed approach is catalyst free, and does not need pressure or a specialized reaction assembly. The reductive formylation of CO2 with sodium borohydride generates formoxy borohydride species in situ, as confirmed by 1H and 11B NMR spectroscopy. The in situ formation of formoxy borohydride species is prominent in formamide based solvents and is critical for the success of the N-formylation reactions. The formoxy borohydride is also found to promote transamidation reactions as a competitive pathway along with reductive functionalization of CO2 with amine leading to N-formylation of amines.

Zinc Hydride Catalyzed Chemoselective Hydroboration of Isocyanates: Amide Bond Formation and C=O Bond Cleavage

Herein, a remarkable conjugated bis-guanidinate (CBG) supported zinc hydride, [{LZnH}₂ ; L={(ArHN)(ArN)-C=N-C=(NAr)(NHAr); Ar=2,6-Et₂ -C₆ H₃ }] (I) catalyzed partial reduction of heteroallenes via hydroboration is reported. A large number of aryl and alkyl isocyanates, including electron-donating and withdrawing groups, undergo reduction to obtain selectively N-boryl formamide, bis(boryl) hemiaminal and N-boryl methyl amine products. The compound I effectively catalyzes the chemoselective reduction of various isocyanates, in which the construction of the amide bond occurs. Isocyanates undergo a deoxygenation hydroboration reaction, in which the C=O bond cleaves, leading to N-boryl methyl amines. Several functionalities such as nitro, cyano, halide, and alkene groups are well-tolerated. Furthermore, a series of kinetic, control experiments and structurally characterized intermediates suggest that the zinc hydride species are responsible for all reduction steps and breaking the C=O bond.

A N-Phosphinoamidinato NHC-Diborene Catalyst for Hydroboration

The use of the N-phosphinoamidinato NHC-diborene catalyst 2 for hydroboration is described. The N-phosphinoamidine tBu₂PN(H)C(Ph)═N(2,6-iPr₂C₆H₃) was reacted with nBuLi in Et₂O to afford the lithium derivative, which was then treated with B₂Br₄(SMe₂)₂ in toluene to form the N-phosphinoamidinate-bridged diborane 1. It was reacted with the N-heterocyclic carbene IMe (:C{N(CH₃)C(CH₃)}₂) and excess potassium graphite at room temperature in toluene to give the N-phosphinoamidinato NHC-diborene compound 2. It can stoichiometrically activate ammonia-borane and carbon dioxide. It also showed catalytic capability. A 2 mol % portion of 2 catalyzed the hydroboration of carbon dioxide (CO₂) with pinacolborane (HBpin) in deuterated benzene (C₆D₆) at 110 °C (conversion >99%), which afforded the methoxyborane [pinBOMe] (yield 97.8%, TOF 33.3 h^-1) and the bis(boryl) oxide [(pinB)₂O]. In addition, 5 mol % of 2 catalyzed the N-formylation of secondary and primary amines by carbon dioxide and pinacolborane to yield the N-formamides (average yield 91.6%, TOF 25.9 h^-1). Moreover, 2 showed chemoselectivity toward catalytic hydroboration of carbonyl compounds. In mechanistic studies, the B═B double bond in compound 2 activated the substrates, the intermediates of which then underwent hydroboration with pinacolborane to yield the products and regenerate catalyst 2.