Advances in Polymerizations Modulated by External Stimuli

Recent Developments on Cationic Polymerization of Vinyl Ethers

In recent times, the evolution of cationic polymerization has taken a multidirectional approach, with the development of cationic reversible addition-fragmentation chain transfer (RAFT) polymerization. In contrast to the conventional cationic polymerization methods, which were typically carried out under inert atmospheres and low temperatures, various novel polymerization techniques have been developed where the reactions are carried out in open air, operate at room temperature, are cost-effective, and are environmentally friendly. Besides, several external stimuli, such as heat, light, chemicals, electrical potential, etc. have been employed to activate and control the polymerization process. It also enables the combination of cationic polymerization with other polymerization methods in a single reaction vessel, eliminating the necessity for isolation and purification during intermediate steps. In addition, significant advancements have been made through various modifications in catalyst systems, resulting in polymers with an exceptionally high level of stereoregularity. This review article comprehensively analyses the recent developments in cationic polymerization, encompassing their applications and offering insights into future perspectives.

Dinuclear group IV metal complexes based on a bis(indenyl)-(E/Z)-stilbene platform: a potential prototype of "photoswitchable" catalysts for olefin polymerization

The preparation of dizirconium complexes based on a novel bis(indenyl)-(E/Z)-stilbene platform was explored. Negishi coupling between the in situ-generated diorganozincates obtained from the respective o/m/p-(E/Z)-dibromostilbenes and the bromo-functionalized zirconocene (η5-Cp*)(η5-2-methyl-4-bromoindenyl)ZrCl2, or, alternatively, the preparation of bis(indene)stilbene pro-ligands {o/m/p-(E/Z)-BisIndSB}H2 through Negishi coupling of the corresponding dibromostilbenes with 4-bromoindene and subsequent metallation/transmetallation with Cp*ZrCl3 or Zr(NMe2)4, allowed the preparation of a series of dinuclear complexes. These were analyzed by NMR spectroscopy and some of them by iASAP-mass spectrometry and by X-ray diffraction studies. Experimental results were compared with DFT modelling of the targeted dinuclear complexes evidencing that the (E)-complexes are more stable by 7-11 kcal mol-1 than their (Z)-analogues. Thermal, uncontrolled isomerization of (Z)- to (E)-stilbene platform was observed experimentally for some systems, in the course of their synthesis, either from the (Z)-dibromostilbene reagent or on the dinuclear complexes resulting from the Negishi coupling. Photoisomerization of the (E)- and (Z)-{BisIndSB}H2 proligands and of complexes {o-(E)-BisIndSB}(Zr(NMe2)3)2 and {m-(E)-BisIndSB}(ZrCl2Cp*)2 was investigated under a variety of conditions. It proved effective for the proligands but induced decomposition of the dizirconium complexes. Time-dependent DFT (TD-DFT) computations were performed to identify unambiguously the nature of the observed absorption bands and account for decomposition of the complexes. Preliminary ethylene/1-hexene homo- and copolymerization investigations did not evidence putative cooperativity phenomena within these dinuclear systems nor significantly differentiated behavior between the (Z)- and (E)-isomers of a given type of complex under the reaction conditions investigated.

Azobenzene-Integrated NHC Ligands: A Versatile Platform for Visible-Light-Switchable Metal Catalysis

A new class of photoswitchable NHC ligands, named azImBA, has been developed by integrating azobenzene into a previously unreported imidazobenzoxazol-1-ylidene framework. These rigid photochromic carbenes enable precise control over confinement around a metal's coordination sphere. As a model system, gold(I) complexes of these NHCs exhibit efficient bidirectional E-Z isomerization under visible light, offering a versatile platform for reversibly photomodulating the reactivity of organogold species. Comprehensive kinetic studies of the protodeauration reaction reveal rate differences of up to 2 orders of magnitude between the E and Z isomers of the NHCs, resulting in a quasi-complete visible-light-gated ON/OFF switchable system. Such a high level of photomodulation efficiency is unprecedented for gold complexes, challenging the current state-of-the-art in photoswitchable organometallics. Thorough investigations into the ligand properties paired with structure-reactivity correlations underscored the unique ligand's steric features as a key factor for reactivity. This effective photocontrol strategy was further validated in gold(I) catalysis, enabling in situ photoswitching of catalytic activity in the intramolecular hydroalkoxylation and -amination of alkynes. Given the significance of these findings and its potential as a widely applicable, easily customizable photoswitchable ancillary ligand platform, azImBA is poised to stimulate the development of adaptive, multifunctional metal complexes.

BaTiO3 Catalyzed Ultrasonic-Driven Piezoelectric-Induced Reversible Addition-Fragmentation Chain-Transfer Polymerization in Aqueous Media

Compared with normal stimulus such as light and heat, ultrasonic possesses much deeper penetration into tissues and organs and has lower scattering in heterogeneous systems as a noninvasive stimulus. Reversible addition-fragmentation chain-transfer polymerization (RAFT) in aqueous media is performed in a commercial ultrasonic wash bath with 40 kHz frequency ultrasonic, in the presence of piezoelectric tetragonal BaTiO3 (BTO) nanoparticles. Owing to the electron transfer from BTO under the ultrasonic action, the water can be decomposed to produce hydroxyl radical (HO•) and initiate the RAFT polymerization (piezo-RAFT). The piezo-RAFT polymerization exhibits features of controllable and livingness, such as linear increase of molar mass and narrow molar mass distributions (Mw/Mn < 1.20). Excellent temporal control of the polymerization and the chain fidelity of polymers are illustrated by "ON and OFF" experiment and chain extension, separately. Moreover, this ultrasonic-driven piezoelectric-induced RAFT polymerization in aqueous media can be directly used for the preparation of piezoelectric hydrogel which have potential application for stress sensor.

PhotoROMP: The Future Is Bright

Since the earliest investigations of olefin metathesis catalysis, light has been the choice for controlling the catalyst activity on demand. From the perspective of energy efficiency, temporal and spatial control, and selectivity, photochemistry is not only an attractive alternative to traditional thermal manufacturing techniques but also arguably a superior manifold for advanced applications like additive manufacturing (AM). In the last three decades, pioneering work in the field of ring-opening metathesis polymerization (ROMP) has broadened the scope of material properties achievable through AM, particularly using light as both an activating and deactivating stimulus. In this Perspective, we explore trends in photocontrolled ROMP systems with an emphasis on approaches to photoinduced activation and deactivation of metathesis catalysts. Recent work has yielded a myriad of commercial and synthetically accessible photosensitive catalyst systems, although comparatively little attention has been paid to achieving precise control over polymer morphology using light. Metal-free, photophysical, and living ROMP systems have also been relatively underexplored. To take fuller advantage of both the thermomechanical properties of ROMP polymers and the operational simplicity of photocontrol, clear directions for the field are to improve the reversibility of activation and deactivation strategies as well as to further develop photocontrolled approaches to tuning cross-link density and polymer tacticity.

Asymmetric Ion-Pairing Photoredox Catalysis for Stereoselective Cationic Polymerization under Light Control

By virtue of noninvasive regulations by light, photocontrolled polymerizations have attracted considerable attention for the precision synthesis of macromolecules. However, a cationic polymerization with simultaneous photocontrol and tacticity-regulation remains elusive so far. Herein, we introduce an asymmetric ion-pairing photoredox catalysis strategy that allows for the development of a stereoselective cationic polymerization with concurrent light regulation for the first time. By employing an ion pair catalyst (PC+/*A-) consisting of a photoredox active cation (PC+) and a sterically confined chiral anion (*A-) to deliver the stereochemical control, the cationic polymerization of vinyl ethers can be achieved with photocontrol and high isotactic selectivity (up to 91% m) at a remarkable low catalyst loading (50 ppm).

Photoswitchable Enantioselective and Helix-Sense Controlled Living Polymerization

A pair of enantiomeric photoswitchable PdII catalysts, alkyne-PdII /LR-azo and alkyne-PdII /LS-azo , were prepared via the coordination of alkyne-PdII and azobenzene-modified phosphine ligands LR-azo and LS-azo . Owing to the cis-trans photoisomerization of the azobenzene moiety, alkyne-PdII /LR-azo and alkyne-PdII /LS-azo exhibited different polymerization activities, helix-sense selectivities, and enantioselectivities during the polymerization of isocyanide monomers under irradiation of different wavelength lights. Furthermore, the achiral isocyanide monomer A-1 could be polymerized efficiently using alkyne-PdII /LR-azo under dark condition in a living/controlled manner. Further, it generated single right-handed helical poly-A-1m (LR-azo ), confirmed by the circular dichroism spectra and atomic force microscopy images. However, the polymerization of A-1 almost could not be initiated under 420 nm light in identical conditions of dark condition. Moreover, the photoswitchable catalyst alkyne-PdII /LR-azo exhibited high enantioselectivity for the polymerization of the racemates of L-1 and D-1, respectively. D-1 was polymerized preferentially under dark condition with a D-1/L-1 rate ratio of 70, yielding single right-handed polyisocyanides. Additionally, reversible enantioselectivity was observed under 420 nm light using alkyne-PdII /LR-azo , and the calculated polymerization rate ratio of L-1/D-1 was 57 because of the isomerization of the azobenzene moiety of the catalyst. Furthermore, alkyne-PdII /LS-azo showed opposite enantioselectivity and helix-sense selectivity during the polymerization of the racemates of L-1 and D-1.

Near-Infrared Light and Acid/Base Dual-Regulated Polymerization Utilizing Imidazole-Anion-Fused Perylene Diimides as Photocatalysts

This work presents the first example of acid/base-responsive and near-infrared (NIR)-absorbing photocatalysts based on imidazole-anion-fused perylene diimide chromophores. The photocatalysts were in situ generated by deprotonation of imidazole-fused perylene diimide under an alkaline environment. NIR (λ = 730 nm, 128 mW/cm2) photoinduced atom transfer radical polymerization (ATRP) was implemented, exhibiting high efficiency and excellent livingness under ppm level of photocatalysts (15 ppm relative to monomer) and Cu(II) complex (10 ppm relative to monomer) concentrations. The method showed capabilities to polymerize behind opaque barriers (i.e., paper and pig skin) and under aerobic condition. Notably, this work demonstrated a dual temporal control of polymerization by adding weak base/acid and switching NIR light on/off. The polymerization can even be halted by bubbling CO2 and was then fully recovered by adding triethylamine. The NIR photoATRP of acrylamide monomers in aqueous solution was also performed, which can be regulated by the change of pH.

Photocatalytic ATRP Depolymerization: Temporal Control at Low ppm of Catalyst Concentration

A photocatalytic ATRP depolymerization is introduced that significantly suppresses the reaction temperature from 170 to 100 °C while enabling temporal regulation. In the presence of low-toxicity iron-based catalysts and under visible light irradiation, near-quantitative monomer recovery could be achieved (up to 90%), albeit with minimal temporal control. By employing ppm concentrations of either FeCl2 or FeCl3, the depolymerization during the dark periods could be completely eliminated, thus enabling temporal control and the possibility to modulate the rate by simply turning the light "on" and "off". Notably, our approach allowed preservation of the end-group fidelity throughout the reaction, could be carried out at high polymer loadings (up to 2M), and was compatible with various polymers and light sources. This methodology provides a facile, environmentally friendly, and temporally regulated route to chemically recycle ATRP-synthesized polymers, thus opening the door for further opportunities.

Lamp vs Laser: A Visible Light Photoinitiator That Promotes Radical Polymerization at Low Intensities and Cationic Polymerization at High Intensities

A visible light absorbing anthraquinone derivative 1-tosyloxy-2-methoxy-9,10-anthraquinone (QT) mediates both cationic and radical polymerizations depending on the intensity of visible light used. A previous study showed that this initiator generates para-toluenesulfonic acid through a stepwise, two-photon excitation mechanism. Thus, under high-intensity irradiation, QT generates acid in sufficient quantities to catalyze the cationic ring-opening polymerization of lactones. However, under low-intensity (lamp) conditions, the two-photon process is negligible, and QT photooxidizes DMSO, generating methyl radicals which initiate the RAFT polymerization of acrylates. This dual capability was utilized to switch between radical and cationic polymerizations to synthesize a copolymer using a one-pot procedure.

Recent Advances in Sequence-Controlled Ring-Opening Copolymerizations of Monomer Mixtures

Transforming renewable resources into functional and degradable polymers is driven by the ever-increasing demand to replace unsustainable polyolefins. However, the utility of many degradable homopolymers remains limited due to their inferior properties compared to commodity polyolefins. Therefore, the synthesis of sequence-defined copolymers from one-pot monomer mixtures is not only conceptually appealing in chemistry, but also economically attractive by maximizing materials usage and improving polymers' performances. Among many polymerization strategies, ring-opening (co)polymerization of cyclic monomers enables efficient access to degradable polymers with high control on molecular weights and molecular weight distributions. Herein, we highlight recent advances in achieving one-pot, sequence-controlled polymerizations of cyclic monomer mixtures using a single catalytic system that combines multiple catalytic cycles. The scopes of cyclic monomers, catalysts, and polymerization mechanisms are presented for this type of sequence-controlled ring-opening copolymerization.

Linear Cyclobutane-Containing Polymer Synthesis via [2 + 2] Photopolymerization in an Unconfined Environment under Visible Light

The [2 + 2] photopolymerization of diolefinic monomers is an appealing approach for the construction of polymeric materials. Herein, we demonstrate that the establishment of an effective donor-acceptor conjugation by introducing electron-donating alkoxy groups at appropriate positions of the benzene ring could activate p-phenylenediacrylate (PDA), thus enabling the development of the first solution [2 + 2] photopolymerization of such monomers under the irradiation of visible light. Variation on the alkoxy groups and the ester parts could allow access to a series of linear cyclobutane-containing polymer products with high molecular weight (up to 140 kDa) and good solubility in common solvents. Further, temporal control and postpolymerization modification with preinstalled pendant C═C bonds via thiol-ene click reaction are also demonstrated with this [2 + 2] photopolymerization system.

Simple and Rapid Access toward AB, BAB and ABAB Block Copolyesters from One-Pot Monomer Mixtures Using an Indium Catalyst

The synthesis of well-defined block copolymers from one-pot monomer mixtures is particularly challenging when monomers are from the same class and show similar reactivity. Herein, an indium-based catalyst that shows comparable rates in the ring-opening homopolymerization of β-butyrolactone (β-BL) and ε-decalactone (ε-DL), demonstrates monomer-selective behavior in one-pot copolymerizations of β-BL and ε-DL. This provides simple and rapid access to well-defined di-, tri-, or tetra-block copolyesters from monomer mixtures. The sequence-controlled nature of these polymers was confirmed by kinetic analysis, ¹³C{¹H} NMR spectroscopy, DSC, and TGA measurements.

A Porphyrinic Donor-Acceptor Conjugated Porous Polymer as Highly Efficient Photocatalyst for PET-RAFT Polymerization

Heterogeneous catalysts offer a highly desirable platform for exploring environmental-benign transformation systems, yet, they typically suffer from significant loss of catalytic efficiency compared with their homogeneous counterparts. Here, the facile synthesis of a porphyrinic conjugated porous polymer incorporated with imidazolium bromide moieties by taking advantage of the Debus-Radziszewski reaction is reported. Owing to the unique donor-acceptor structure, this heterogeneous and metal-free photocatalyst exhibits much improved catalytic activity compared with its small molecular analogs in photoinduced electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization, producing polymers with narrow distribution (Đ = 1.06-1.18) and high degree of chain-end fidelity. Moreover, the heterogeneous catalyst can be easily separated at the end of polymerization by centrifugation and recycled for five independent PET-RAFT polymerizations without obvious decreases in catalytic efficiency.

Reversible On/Off Switching of Lactide Cyclopolymerization with a Redox-Active Formazanate Ligand

Redox-switching of a formazanate zinc catalyst in ring-opening polymerization (ROP) of lactide is described. Using a redox-active ligand bound to an inert metal ion (Zn²⁺) allows modulation of the catalytic activity by reversible reduction/oxidation chemistry at a purely organic fragment. A combination of kinetic and spectroscopic studies, together with mass spectrometry of the catalysis mixture, provides insight in the nature of the active species and the initiation of lactide ring-opening polymerization. The mechanistic data highlight the key role of the redox-active ligand and provide a rationale for the formation of cyclic polymer.

Mathematical Description of the RAFT Copolymerization of Styrene and Glycidyl Methacrylate Using the Terminal Model

A mathematical model for the kinetics, composition and molar mass development of the bulk reversible addition-fragmentation chain transfer (RAFT) copolymerization of glycidyl methacrylate (GMA) and styrene (St), at several GMA molar feed fractions at 103 °C, in the presence of 2-cyano isopropyl dodecyl trithiocarbonate as the RAFT agent and 1,1′-azobis(cyclohexane carbonitrile), as the initiator, is presented. The copolymerization proceeded in a controlled manner and dispersities of the copolymers remained narrow even at high conversions. Experimental data and calculated profiles of conversion versus time, composition versus conversion and molar mass development for the RAFT copolymerization of St and GMA agreed well for all conditions tested, including high-conversion regions. The kinetic rate constants associated with the RAFT- related reactions and diffusion-controlled parameters were properly estimated using a weighted nonlinear multivariable regression procedure. The mathematical model developed in this study may be used as an aid in the design and upscaling of industrial RAFT polymerization processes.

Red-Light-Induced, Copper-Catalyzed Atom Transfer Radical Polymerization

Despite advances in photochemical atom transfer radical polymerization (photoATRP), these systems often rely on the use of UV light for the activation/generation of the copper-based catalytic species. To circumvent the problems associated with the UV light, we developed a dual photoredox catalytic system to mediate photoinduced ATRP under red-light irradiation. The catalytic system is comprised of a Cu catalyst to control the polymerization via ATRP equilibrium and a photocatalyst, such as zinc(II) tetraphenylporphine or zinc(II) phthalocyanine, to generate the activator Cu^I species under red-light irradiation. In addition, this system showed oxygen tolerance due to the consumption of oxygen in the photoredox reactions, yielding well-controlled polymerizations without the need for deoxygenation processes.

Action of Mechanical Forces on Polymerization and Polymers

In this review, we summarize recent developments in the field of the mechanochemistry of polymers. The aim of the review is to consider the consequences of mechanical forces and actions on polymers and polymer synthesis. First, we review classical works on chemical reactions and polymerization processes under strong shear deformations. Then, we analyze two emerging directions of research in mechanochemistry—the role of mechanophores and, for the first time, new physical phenomena, accompanying external impulse mechanical actions on polymers. Mechanophores have been recently proposed as sensors of fatigue and cracks in polymers and composites. The effects of the high-pressure pulsed loading of polymers and composites include the Dzyaloshinskii–Moriya effect, emission of superradiation and the formation of metal nanoparticles. These effects provide deeper insight into the mechanism of chemical reactions under shear deformations and pave the way for further research in the interests of modern technologies.

Acridinium salts as photoredox organocatalysts for photomediated cationic RAFT and DT polymerizations of vinyl ethers

A series of acridinium salts with high excited-state oxidative power are employed as photoredox organocatalysts for photomediated cationic RAFT and DT polymerizations under visible light.

Organocatalytic orthogonal ATRP and ring-opening polymerization using a single dual-function photocatalyst

Organocatalytic orthogonal atom transfer radical polymerization and ring-opening polymerization have been achieved using a single designer dual-function photocatalyst.

Porphyrin-based donor-acceptor COFs as efficient and reusable photocatalysts for PET-RAFT polymerization under broad spectrum excitation

Covalent organic frameworks (COFs) are crystalline and porous organic materials attractive for photocatalysis applications due to their structural versatility and tunable optical and electronic properties. The use of photocatalysts (PCs) for polymerizations enables the preparation of well-defined polymeric materials under mild reaction conditions. Herein, we report two porphyrin-based donor-acceptor COFs that are effective heterogeneous PCs for photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT). Using density functional theory (DFT) calculations, we designed porphyrin COFs with strong donor-acceptor characteristics and delocalized conduction bands. The COFs were effective PCs for PET-RAFT, successfully polymerizing a variety of monomers in both organic and aqueous media using visible light (λ max from 460 to 635 nm) to produce polymers with tunable molecular weights (MWs), low molecular weight dispersity, and good chain-end fidelity. The heterogeneous COF PCs could also be reused for PET-RAFT polymerization at least 5 times without losing photocatalytic performance. This work demonstrates porphyrin-based COFs that are effective catalysts for photo-RDRP and establishes design principles for the development of highly active COF PCs for a variety of applications.

Applications of Halogen-Atom Transfer (XAT) for the Generation of Carbon Radicals in Synthetic Photochemistry and Photocatalysis

The halogen-atom transfer (XAT) is one of the most important and applied processes for the generation of carbon radicals in synthetic chemistry. In this review, we summarize and highlight the most important aspects associated with XAT and the impact it has had on photochemistry and photocatalysis. The organization of the material starts with the analysis of the most important mechanistic aspects and then follows a subdivision based on the nature of the reagents used in the halogen abstraction. This review aims to provide a general overview of the fundamental concepts and main agents involved in XAT processes with the objective of offering a tool to understand and facilitate the development of new synthetic radical strategies.

ABC and ABAB Block Copolymers by Electrochemically Controlled Ring-Opening Polymerization

An electrochemically controlled synthesis of multiblock copolymers by alternating the redox states of (salfan)Zr(O^tBu)₂ (salfan = 1,1'-di(2-tert-butyl-6-N-methylmethylenephenoxy)ferrocene) is reported. Aided by electrochemistry with a glassy carbon working electrode, an in situ potential switch alters the catalyst's oxidation state and its subsequent monomer (l-lactide, β-butyrolactone, or cyclohexene oxide) selectivity in one pot. Various multiblock copolymers were prepared, including an ABAB tetrablock copolymer, poly(cyclohexene oxide-b-lactide-b-cyclohexene oxide-b-lactide), and an ABC triblock copolymer, poly(hydroxybutyrate-b-cyclohexene oxide-b-lactide). The polymers produced using this technique are similar to those produced via a chemical redox reagent method, displaying moderately narrow dispersities (1.1-1.5) and molecular weights ranging from 7 to 26 kDa.

Sono-Fenton Chemistry Converts Phenol and Phenyl Derivatives into Polyphenols for Engineering Surface Coatings

We report a sono-Fenton strategy to mediate the supramolecular assembly of metal-phenolic networks (MPNs) as substrate-independent coatings using phenol and phenyl derivatives as building blocks. The assembly process is initiated from the generation of hydroxyl radicals (^. OH) using high-frequency ultrasound (412 kHz), while the metal ions synergistically participate in the production of additional ^. OH for hydroxylation/phenolation of phenol and phenyl derivatives via the Fenton reaction and also coordinate with the phenolic compounds for film formation. The coating strategy is applicable to various phenol and phenyl derivatives and different metal ions including Fe^II , Fe^III , Cu^II , and Co^II . In addition, the sono-Fenton strategy allows real-time control over the assembly process by turning the high-frequency ultrasound on or off. The properties of the building blocks are maintained in the formed films. This work provides an environmentally friendly and controllable method to expand the application of phenolic coatings for surface engineering.

Light-Mediated Polymerization Induced by Semiconducting Nanomaterials: State-of-the-Art and Future Perspectives

Direct capture of solar energy for chemical transformation via photocatalysis proves to be a cost-effective and energy-saving approach to construct organic compounds. With the recent growth in photosynthesis, photopolymerization has been established as a robust strategy for the production of specialty polymers with complex structures, precise molecular weight, and narrow dispersity. A key challenge in photopolymerization is the scarcity of effective photomediators (photoinitiators, photocatalysts, etc.) that can provide polymerization with high yield and well-defined polymer products. Current efforts on developing photomediators have mainly focused on organic dyes and metal complexes. On the other hand, nanomaterials (NMs), particularly semiconducting nanomaterials (SNMs), are suitable candidates for photochemical reactions due to their unique optical and electrical properties, such as high absorption coefficients, large charge diffusion lengths, and broad absorption spectra. This review provides a comprehensive insight into SNMs' photomediated polymerizations and highlights the roles SNMs play in photopolymerizations, types of polymerizations, applications in producing advanced materials, and the future directions.

Sequence Control from Mixtures: Switchable Polymerization Catalysis and Future Materials Applications

There is an ever-increasing demand for higher-performing polymeric materials counterbalanced by the need for sustainability throughout the life cycle. Copolymers comprising ester, carbonate, or ether linkages could fulfill some of this demand as their monomer-polymer chemistry is closer to equilibrium, facilitating (bio)degradation and recycling; many monomers are or could be sourced from renewables or waste. Here, an efficient and broadly applicable route to make such copolymers is discussed, a form of switchable polymerization catalysis which exploits a single catalyst, switched between different catalytic cycles, to prepare block sequence selective copolymers from monomer mixtures. This perspective presents the principles of this catalysis, catalyst design criteria, the selectivity and structural copolymer characterization tools, and the properties of the resulting copolymers. Uses as thermoplastic elastomers, toughened plastics, adhesives, and self-assembled nanostructures, and for programmed degradation, among others, are discussed. The state-of-the-art research into both catalysis and products, as well as future challenges and directions, are presented.

Electrochemically switchable polymerization from surface-anchored molecular catalysts

Redox-switchable polymerizations of lactide and epoxides were extended to the solid state by anchoring an iron-based polymerization catalyst to TiO2 nanoparticles. The reactivity of the molecular complexes and their redox-switching characteristics were maintained in the solid-state. These properties resulted in surface-initiated polymerization reactions that produced polymer brushes whose chemical composition is dictated by the oxidation state of the iron-based complex. Depositing the catalyst-functionalized TiO2 nanoparticles on fluorine-doped tin oxide resulted in an electrically addressable surface that could be used to demonstrate spatial control in redox-switchable polymerization reactions. By using a substrate that contained two electrically isolated domains wherein one domain was exposed to an oxidizing potential, patterns of surface-bound polyesters and polyethers were accessible through sequential application of lactide and cyclohexene oxide. The differentially functionalized surfaces demonstrated distinct physical properties that illustrated the promise for using the method to pattern surfaces with multiple, chemically distinct polymer brushes.

Conjugated Cross-linked Phenothiazines as Green or Red Light Heterogeneous Photocatalysts for Copper-Catalyzed Atom Transfer Radical Polymerization

Using the power of light to drive controlled radical polymerizations has provided significant advances in synthesis of well-defined polymers. Photoinduced atom transfer radical polymerization (ATRP) systems often employ UV light to regenerate copper activator species to mediate the polymerization. Taking full advantage of long-wavelength visible light for ATRP would require developing appropriate photocatalytic systems that engage in photoinduced electron transfer processes with the ATRP components to generate activating species. Herein, we developed conjugated microporous polymers (CMP) as heterogeneous photocatalysts to exploit the power of visible light in promoting copper-catalyzed ATRP. The photocatalyst was designed by cross-linking phenothiazine (PTZ) as a photoactive core in the presence of dimethoxybenzene as a cross-linker via the Friedel-Crafts reaction. The resulting PTZ-CMP network showed photoactivity in the visible region due to the extended conjugation throughout the network because of the aromatic groups connecting the PTZ units. Therefore, photoinduced copper-catalyzed ATRP was performed with CMPs that regenerated activator species under green or red light irradiation to start the ATRP process. This resulted in efficient polymerization of acrylate and methacrylate monomers with high conversion and well-controlled molecular weight. The heterogeneous nature of the photocatalyst enabled easy separation and efficient reusability in subsequent polymerizations.

Ultrasound expands the versatility of polydopamine coatings

Polydopamine (PDA) coating of surfaces is a versatile strategy to fabricate functional films on various substrates, which typically requires oxygen and alkaline pH. Overcoming such limitations may enhance the versatility of this technique. Herein, we develop a simple and green sonochemical process for PDA coatings, which overcomes the limitations of traditional coating technique and expands the versatility of PDA chemistry. The oxidizing radicals generated by high frequency ultrasound (412 kHz) are utilized to initiate and accelerate the polymerization of dopamine. The sonochemical rate of film deposition is found to be about twice faster than that of the traditional method in the presence of oxygen. Importantly, the PDA coatings can be obtained in neutral or acidic aqueous solutions and even in the absence of oxygen. The PDA coatings can be moderated by turning on or off high frequency ultrasound. This study provides an environmentally friendly and economic method for the engineering of PDA coatings independent of the solution pH and nature of dissolved gas.

Electricity-Driven Post-Functionalization of Conducting Polymers

Electrochemical doping of conducting polymers (CPs) generates polarons (radical ionic species) and bipolarons (ionic species) in their backbone via multi-electron transfer between an electrode and the CP. In the electrochemical polymer reaction (ePR), these generated ionic species are regarded as reactive intermediates for further transformation of the chemical structures of CPs. This electrochemical post-functionalization can easily be used to control the degree of reactions by turning a power supply on/off, as well as tuning the applied electrode potential, which leads to fine-tuning of the various properties of the CPs, such as the HOMO/LUMO level and PL properties. This Account summarizes recent developments in the electrochemical post-functionalization of CPs. In particular, we focus on reaction design for the ePR, with respect to the preparation and structure of the precursor polymers, applicable functional groups, efficient reaction conditions, and electrolytic methodologies.

Smart, Naturally-Derived Macromolecules for Controlled Drug Release

A series of troxerutin-based macromolecules with ten poly(acrylic acid) (PAA) or poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) homopolymer side chains were synthesized by a supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) approach. The prepared precisely-defined structures with low dispersity (M_w/M_n < 1.09 for PAA-based, and M_w/M_n < 1.71 for PDMAEMA-based macromolecules) exhibited pH-responsive behavior depending on the length of the polymer grafts. The properties of the received polyelectrolytes were investigated by dynamic light scattering (DLS) measurement to determine the hydrodynamic diameter and zeta potential upon pH changes. Additionally, PDMAEMA-based polymers showed thermoresponsive properties and exhibited phase transfer at a lower critical solution temperature (LCST). Thanks to polyelectrolyte characteristics, the prepared polymers were investigated as smart materials for controlled release of quercetin. The influence of the length of the polymer grafts for the quercetin release profile was examined by UV–VIS spectroscopy. The results suggest the strong correlation between the length of the polymer chains and the efficiency of active substance release, thus, the adjustment of the composition of the macromolecules characterized by branched architecture can precisely control the properties of smart delivery systems.

Radical photoinitiation with LEDs and applications in the 3D printing of composites

Radical initiation upon LED light irradiation is discussed herein as well as its application in additive manufacturing. The ability of manufacturing complex structures, freedom of design, low energy consumption, fast prototyping, and excellent spatial resolution are the main benefits of the 3D printing technology by photopolymerization. Therefore, the 3D printing of composites through photopolymerization processes is developing rapidly in the academia and industry, and has been a turning point of additive manufacturing (AM). In the present review, an overview of radical initiation with LEDs (i.e., the photopolymerization LED technology, the photoinitiating systems, and the polymerizable media) and of the main 3D printing methods by photopolymerization, materials, and their applications in different fields has been carried out. As a challenging topic, the issue of light penetration in a filled matrix for the access to composites is discussed, including the light transmittance of the composite, the mismatch of the refractive index between the filler and the monomer, the factors of the filler, and the adverse influence of low light penetration on the 3D printing process. In particular, the popular applications of 3D printing by photopolymerization in biomedical science, electronic industry, materials for adsorption, and 4D printing are discussed. Overall, this review gives an overview of the 3D printing of polymer matrix composites through photopolymerization processes as a benchmark for future research and development.

Ortho-vanillin derived Al(iii) and Co(iii) catalyst systems for switchable catalysis using ε-decalactone, phthalic anhydride and cyclohexene oxide

Switchable catalysis is a useful one-pot method to prepare block polyesters utilising a single catalyst exposed to a mixture of monomers.

Imidazole based dual photo/thermal initiators for highly efficient radical polymerization under air with a metal-free approach

A metal-free visible LED photopolymerization process, initiated by imidazole based charge transfer complexes under mild conditions (room temperature, without an inert atmosphere, monomer purification or stabilizer removal), is reported.

Aqueous emulsion polymerizations of methacrylates and styrene via reversible complexation mediated polymerization (RCMP)

Aqueous emulsion polymerization via reversible complexation mediated living radical polymerization yielded low-dispersity poly(methyl methacrylate)s and polystyrenes.