Photoreduction Mechanism of CO2 to CO Catalyzed by a Three-Component Hybrid Construct with a Bimetallic Rhenium Catalyst

Visible light-driven CO2 photoreduction by a Re(I) complex immobilized onto CuO/Nb2O5 heterojunctions

The immobilization of Re(I) complexes onto metal oxide surfaces presents an elegant strategy to enhance their stability and reusability toward photocatalytic CO2 reduction. In this study, the photocatalytic performance of fac-[ClRe(CO)3(dcbH2)], where dcbH2 = 4,4'-dicarboxylic acid-2,2'-bipyridine, anchored onto the surface of 1%m/m CuO/Nb2O5 was investigated. Following adsorption, the turnover number for CO production (TONCO) in DMF/TEOA increased significantly, from ten in solution to 370 under visible light irradiation, surpassing the TONCO observed for the complex onto pristine Nb2O5 or CuO surfaces. The CuO/Nb2O5 heterostructure allows for efficient electron injection by the Re(I) center, promoting efficient charge separation. At same time CuO clusters introduce a new absorption band above 550 nm that contributes for the photoreduction of the reaction intermediates, leading to a more efficient CO evolution and minimization of side reactions.

Toward a mechanistic understanding of Rhenium(VII) adsorption behavior onto aminated polymeric adsorbents: Batch experiments, spectroscopic analyses, and theoretical computations

Rhenium, a rare and critical metal, existing in the industrial wastewater has been aroused extensive interests recently, due to its environmental and resource issues. Chitosan, an easily available, low-cost and eco-friendly biopolymer, was prepared and modified by grafting primary, secondary, tertiary and quaternary amino groups, respectively. Adsorption behaviors and interactions between ReO4- and these four types of aminated adsorbents were investigated through batch experiments, spectroscopic analysis, and theoretical computations. Chitosan modified with secondary amines showed an extremely high uptake of ReO4- with 742.0 mg g-1, which was higher than any reported adsorbents so far. Furthermore, a relatively high adsorption selectivity for Re(VII), as well as the stable and facile regeneration of these aminated adsorbents revealed a promising approach for Re(VII) recovery in full-scale applications. The electrostatic attraction was illustrated to be the main adsorption mechanism by Fourier Transform Infrared Spectroscopy and X-ray Photoelectron Spectroscopy analyses. Significantly, the sub-steps of the adsorption process, encompassing the transformation of binding sites and the subsequent binding between these sites and the adsorbate, have been thoroughly investigated through the density functional theory (DFT) calculation method. This approach was firstly proposed to clearly demonstrate the differences in Re(VII) adsorption behavior onto four types of aminated adsorbents, resulting the importance of not only strong binding energy but also an appropriate binding spatial environmental for effective Re(VII) adsorption.

The Facile Synthesis of a Re-Complex Heterogeneous Catalysis System for Enhancing CO2 Photoreduction Activity

fac-Re(2,2'-bipyridine)(CO)₃Cl] (denoted as ReCC) is an efficient molecule-catalyst with high selectivity in the photoreduction of CO₂ to CO in a homogeneous system. However, the two major drawbacks of Re(I) complexes in the homogeneous system, easy degradation and difficult separation, seriously hinder its development in the field of industrial applications. In this paper, we designed and prepared two different Re-complex fixation systems (denoted as ReCC@TiO₂-5 wt% and ReCC-TiO₂-5 wt%) based on TiO₂ gel via the sensitization method and sol-gel method, respectively. Compared with a pure ReCC complex, both of them exhibited excellent photocatalytic reduction activity. In particular, the sol-gel hybrid system (ReCC-TiO₂-5 wt%) displayed outstanding positive synergistic effects on the photocatalytic activity and the long durability of the photocatalytic process. A series of characterizations were carried out to explore the probable photocatalytic reduction process mechanism, which provides the theoretical basis and technical support for the Re complex fixation method.

Cooperative Initiation in a Dinuclear Indium Complex for CO2 Epoxide Copolymerization

Dinuclear indium complexes have been synthesized and characterized. These include neutral and cationic indium complexes supported by a Schiff base ligand bearing a binaphthol linker. The new compounds were investigated for alternating copolymerization of CO₂ and cyclohexene oxide. In particular, the neutral indium chloride complex (±)-[(O_NapN_iN)InCl₂]₂ (4) showed high conversion of cyclohexene oxide and selectivity for poly(cyclohexene carbonate) formation without cocatalysts at 80 °C under various CO₂ pressures (2-30 bar). Importantly, the reactivity of the dinuclear indium chloride complex 4 is drastically different from that of the mononuclear indium chloride complex (±)-(NN_iO_tBu)InCl₂ (5), suggesting a cooperative initiation mechanism involving the two indium centers in 4.

Complexed Semiconductor Cores Activate Hexaniobate Ligands as Nucleophilic Sites for Solar‐Light Reduction of CO 2 by Water

Although pure and functionalized solid-state polyniobates such as layered perovskites and niobate nanosheets are photocatalysts for renewable-energy processes, analogous reactions by molecular polyoxoniobate cluster-anions are nearly absent from the literature. We now report that under simulated solar light, hexaniobate cluster-anion encapsulated 30-Ni^II -ion "fragments" of surface-protonated cubic-phase-like NiO cores activate the hexaniobate ligands towards CO₂ reduction by water. Photoexcitation of the NiO cores promotes charge-transfer reduction of Nb^V to Nb^IV , increasing electron density at bridging oxo atoms of Nb-μ-O-Nb linkages that bind and convert CO₂ to CO. Photogenerated NiO "holes" simultaneously oxidize water to dioxygen. The findings point to molecular complexation of suitable semiconductor "fragments" as a general method for utilizing electron-dense polyoxoniobate anions as nucleophilic photocatalysts for solar-light driven activation and reduction of small molecules.

Visible-Light-Driven Oxidation of Amines to Imines in Air Catalyzed by Polyoxometalate-Tris(bipyridine)ruthenium Hybrid Compounds

The development of visible-light photocatalysts for the selective oxidative coupling of amines to imines is an area of great interest. Herein, four hybrid compounds based on polyoxometalate anions and tris(bipyridine)ruthenium cations, Ru(bpy)₃[M₆O₁₉] (M = Mo, W) 1-2, [Ru(bpy)₃]₂[Mo₈O₂₆] 3, [Ru(bpy)₃]₂[W₁₀O₃₂] 4, are prepared and characterized by X-ray diffraction (single-crystal and powder), elemental analysis, energy-dispersive X-ray spectroscopy (EDS) analysis, infrared (IR) spectroscopy, and solid diffuse reflective spectroscopy. Single-crystal structural analysis indicates that polyoxometalate anions and tris(bipyridine)ruthenium cations interact with each other through extensive hydrogen bonds in these compounds. These hybrid species with strong visible-light-harvesting abilities and suitable photocatalytic energy potentials show excellent photocatalytic activity and selectivity for the oxidation of amines to imines at room temperature in air as an oxidant. Among them, compound 1 with the [Mo₆O₁₉]^2- anion has the highest catalytic activity, which can swiftly convert >99.0% of benzylamine into N-benzylidenebenzylamine with a selectivity of 98.0% in 25 min illumination by a 10 W 445 nm light-emitting diode (LED). Its turnover frequency reaches 392 h^-1, which is not only better than the homogeneous catalyst [Ru(bpy)₃]Cl₂ but also much superior to those achieved over most of reported heterogeneous catalysts. Moreover, it shows a wide generality for various aromatic amines, accompanied by the advantages of good recyclability and stability. The photocatalytic oxidation mechanism of amines to the corresponding imines over polyoxometalate-based hybrid compounds was fully investigated.

The tremendous boost for photocatalytic properties of g-C3N4: regulation from polymerization kinetics to crystal structure engineering

Graphite carbon nitride (g-C3N4) has become research hotspot owing to its special electronic structure and excellent chemical stability. Although g-C3N4 has made great progress in the field of photocatalysis, its...

Molecular Transition Metal Oxide Electrocatalysts for the Reversible Carbon Dioxide-Carbon Monoxide Transformation

Carbon monoxide dehydrogenase (CODH) enzymes are active for the reversible CO oxidation-CO₂ reduction reaction and are of interest in the context of CO₂ abatement and carbon-neutral solar fuels. Bioinspired by the active-site composition of the CODHs, polyoxometalates triply substituted with first-row transition metals were modularly synthesized. The polyanions, in short, {SiM₃ W₉ } and {SiM'₂ M''W₉ }, M, M', M''=Cu^II , Ni^II , Fe^III are shown to be electrocatalysts for reversible CO oxidation-CO₂ reduction. A catalytic Tafel plot showed that {SiCu₃ W₉ } was the most reactive for CO₂ reduction, and electrolysis reactions yielded significant amounts of CO with 98 % faradaic efficiency. In contrast, Fe-Ni compounds such as {SiFeNi₂ W₉ } preferably catalyzed the oxidation of CO to CO₂ similar to what is observed for the [NiFe]-CODH enzyme. Compositional control of the heterometal complexes, now and in the future, leads to control of reactivity and selectivity for CO₂ electrocatalytic reduction.

Coordination-driven discrete metallo-supramolecular assembly for rapid and selective photochemical CO2 reduction in aqueous solution

A discrete metallo-supramolecular assembly composed of six iron(ii) cations and twelve redox-active terpyridine fragments has been developed for the highly efficient visible-light-driven reduction of CO2 to CO with a TON of 14 956 and 99.6% selectivity in the presence of an organic thermally activated delayed fluorescence (TADF) photosensitizer 4CzIPN in aqueous solution. The photochemical system proceeds rapidly with a turnover frequency (TOF) of 276 min-1. It is demonstrated that the redox-active terpyridine fragments in the assembly are reduced by the photosensitizer which could further act as an electron reservoir for CO2 reduction, resulting in the highly efficient reduction of CO2. This work shows that discrete metallo-supramolecular assemblies could be used for robust photochemical CO2 reduction.