Ultrahigh Oxygen Evolution Reaction Activity Achieved Using Ir Single Atoms on Amorphous CoOx Nanosheets

Neighbouring Synergy in High-Density Single Ir Atoms on CoGaOOH for Efficient Alkaline Electrocatalytic Oxygen Evolution

The catalytic performance of single-atom catalysts was strictly limited by isolated single-atom sites. Fabricating high-density single atoms to realize the synergetic interaction in neighbouring single atoms could optimize the adsorption behaviors of reaction intermediates, which exhibited great potential to break performance limitations and deepen mechanistic understanding of electrocatalysis. However, the catalytic behavior governed by neighbouring single atoms is particularly elusive and has yet to be understood. Herein, we revealed that the synergetic interaction in neighbouring single atoms contributes to superior performance for oxygen evolution relative to isolated Ir single atoms. Neighbouring single atoms was achieved by fabricating high-density single atoms to narrow the distance between single atoms. Electrochemical measurements demonstrated that the Nei-Ir1/CoGaOOH with neighbouring Ir single atoms exhibited a low overpotential of 170 mV at a current density of 10 mA cm-2, and long-durable stability over 2000 h for oxygen evolution. Mechanistic studies revealed that neighbouring single atoms synergetic stabilized the *OOH intermediates via extra hydrogen bonding interactions, thus significantly reducing the reaction energy barriers, as compared to isolated Ir single atoms. The discovery of the synergetic interaction in neighbouring single atoms could offer guidance for the development of efficient electrocatalysts, thus accelerating the world's transition to sustainable energy.

Advancing Energy Sustainability Through Solar-to-Fuel Technologies: From Materials to Devices and Systems

To achieve carbon neutrality and sustainable development, innovative solar-to-fuel systems have been designed through the integration of solar energy harvesting and electrochemical devices. Over the last decade, there have been notable advancements in enhancing the efficiency and durability of these solar-to-fuel systems. Despite the advancements, there remains significant potential for further improvements in the performance of systems. Enhancements can be achieved by optimizing electrochemical catalysts, advancing the manufacturing technologies of photovoltaics and electrochemical cells, and refining the overall design of these systems. In the realm of catalyst optimization, the effectiveness of materials can be significantly improved through active site engineering and strategic use of functional groups. Similarly, the performance of electrochemical devices can be enhanced by incorporating specific additives into electrolytes and optimizing gas diffusion electrodes. Improvements in solar harvesting devices are achievable through efficient passivant and self-assembled monolayers, which enhance the overall quality and efficiency of these systems. Additionally, optimizing the energy conversion efficiency involves the strategic use of DC converters, photoelectrodes, and redox media. This review aims to provide a comprehensive overview of the advancements in solar-powered electrochemical energy conversion systems, laying a solid foundation for future research and development in the field of energy sustainability.

Electrochemical CO2 Reduction on Cu-Based Monatomic Alloys: A DFT Study

In recent years, single-atom alloy catalysts (SAAs) have received much attention due to the combination of structural features of both single-atom and alloy catalysts, as well as their efficient catalytic activity, high selectivity, and high stability in various chemical reactions. In this work, we designed a series of Cu-based SAAs by doping isolated 3d transition metal (TM1) atoms on the surface of Cu(111) (TM1 = Fe, Co, Ru, Rh, Os and Ir), in which Ir1/Cu(111) SAAs are considered to be the most stable among 3d-series SAAs due to their optimal binding energy (Eb). The density of states of SAAs have been systematically investigated to further discuss structural properties. Based on density functional theory calculations, the activity and selectivity of Ir1/Cu(111) SAAs are investigated for electrocatalytic CO2 reduction reaction (CO2RR). The initial hydrogenation of CO2 on Ir1/Cu(111) SAAs can form *CO intermediates, which will be further to CH4 production by the pathway of *CO → *CHO → *CHOH → *CH2OH → *CH2 → *CH3 → CH4. This study provides theoretical insights for the rational design of selective Cu-based monatomic alloy catalysts.

Facile synthesis of AuIr alloy nanoparticles and their enhanced oxygen evolution reaction performance under acidic and alkaline conditions

The development of electrocatalysts that can maintain high reactivity and stability over a wide pH range during electrolysis reactions is essential for the realization of a clean hydrogen energy society. Herein, we report the synthesis of AuIr alloy nanoparticles (NPs) with an excellent oxygen evolution reaction (OER) performance over a wide pH range. The NPs were synthesized via an antisolvent crystallization-based method and maintained their small sizes regardless of adjustments in the ratio of the Au/Ir precursor. AuIr/C exhibited low overpotential and good long-term stability under acidic and alkaline conditions compared with the Ir/C and commercial RuO2. The enhanced OER performance of AuIr/C was attributed to efficient charge transfer, resulting in an optimal synergistic effect of electrons.

Single Atom Ru Doped Ni2P/Fe3P Heterostructure for Boosting Hydrogen Evolution for Water Splitting

Modulating the chemical composition and structure has been considered as one of the most promising strategies for developing high-efficient water splitting catalysts. Here, a single-atom Ru doped Ni2P/Fe3P catalyst is synthesized by introducing the dispersed Ru atoms to adjust Ni2P/Fe3P heterostructure. Single atom Ru provides effective hydrogen evolution reaction (HER) active sites for boosting catalytic activities. The catalyst with only 0.2 wt.% content of Ru exhibits an overpotential of 19.3 mV at 10 mA cm-2, which is obviously lower than 146.1 mV of Ni2P/Fe3P. Notably, an alkaline overall water electrolyzer based on Ru-Ni2P/Fe3P catalysts achieves a cell voltage of 1.47 V and operates over 600 h at 10 mA cm-2, which is superior to that of benchmark RuO2//Pt/C (1.61 V). The theoretical calculations further confirm that Ru single atom doping can effectively optimize the hydrogen/water adsorption free energy of the active site and therefore improve the HER activity of heterostructure. This work provides a valuable reference to design high-activity and durability catalyst for water splitting through the double modulation of interface-effect and atomic doping.

Ultrastable and highly active Co-vacancies-enriched IrCo bifunctional nanoalloys for proton exchange membrane water electrolysis

Exploring the electrocatalysts with high intrinsic activity and stability for both anode and cathode to tolerate the extremely acidic condition in proton exchange membrane water electrolyzer (PEMWE) is crucial for widespread industrial application. Herein, we constructed the bifunctional IrCox nanoalloys with abundant metal vacancies via the combination of chemical reduction and electrochemical treatment for overall water splitting. The developed IrCo0.13 exhibits ultra-low overpotentials of 238 mV for OER and 18.6 mV for HER at 10 mA cm-2 in 0.1 M HClO4, and achieves the exceptional stability of 1000 h for OER and 100 h for HER at 10 mA cm-2. Further, the cell voltage is only 1.68 V to reach a high current density of 1 A cm-2 in PEMWE with IrCo0.13 as the both cathode and anode catalytic layer, and it shows excellent corrosion resistance in acidic environment, evidenced by 415 h stable operation at 1 A cm-2. The strong electronic interactions in the Ir-Co atomic heterostructure and the in-situ generation of Co vacancies by electrochemical oxidation synergistically contribute to the enhanced activity and stability via optimizing the electronic structure of adjacent Ir active sites, enhancing the conductivity and electrochemical active surface area of the catalyst, accelerating charge transfer and kinetics. This work provides a new perspective for designing bifunctional catalysts for practical application in PEMWE.

Dynamic chloride ion adsorption on single iridium atom boosts seawater oxidation catalysis

Seawater electrolysis offers a renewable, scalable, and economic means for green hydrogen production. However, anode corrosion by Cl- pose great challenges for its commercialization. Herein, different from conventional catalysts designed to repel Cl- adsorption, we develop an atomic Ir catalyst on cobalt iron layered double hydroxide (Ir/CoFe-LDH) to tailor Cl- adsorption and modulate the electronic structure of the Ir active center, thereby establishing a unique Ir-OH/Cl coordination for alkaline seawater electrolysis. Operando characterizations and theoretical calculations unveil the pivotal role of this coordination state to lower OER activation energy by a factor of 1.93. The Ir/CoFe-LDH exhibits a remarkable oxygen evolution reaction activity (202 mV overpotential and TOF = 7.46 O2 s-1) in 6 M NaOH+2.8 M NaCl, superior over Cl--free 6 M NaOH electrolyte (236 mV overpotential and TOF = 1.05 O2 s-1), with 100% catalytic selectivity and stability at high current densities (400-800 mA cm-2) for more than 1,000 h.

Catalyzing Sustainable Water Splitting with Single Atom Catalysts: Recent Advances

Electrochemical water splitting for sustainable hydrogen and oxygen production have shown enormous potentials. However, this method needs low-cost and highly active catalysts. Traditional nano catalysts, while effective, have limits since their active sites are mostly restricted to the surface and edges, leaving interior surfaces unexposed in redox reactions. Single atom catalysts (SACs), which take advantage of high atom utilization and quantum size effects, have recently become appealing electrocatalysts. Strong interaction between active sites and support in SACs have considerably improved the catalytic efficiency and long-term stability, outperforming their nano-counterparts. This review's first section examines the Hydrogen Evolution Reaction (HER) and the Oxygen Evolution Reaction (OER). In the next section, SACs are categorized as noble metal, non-noble metal, and bimetallic synergistic SACs. In addition, this review emphasizes developing methodologies for effective SAC design, such as mass loading optimization, electrical structure modulation, and the critical role of support materials. Finally, Carbon-based materials and metal oxides are being explored as possible supports for SACs. Importantly, for the first time, this review opens a discussion on waste-derived supports for single atom catalysts used in electrochemical reactions, providing a cost-effective dimension to this vibrant research field. The well-known design techniques discussed here may help in development of electrocatalysts for effective water splitting.

Ultrafine Iridium Nanoparticles Anchored on Co-Based Metal-Organic Framework Nanosheets for Robust Hydrogen Evolution in Alkaline Media

A highly promising electrocatalyst has been designed and prepared for the hydrogen evolution reaction (HER). This involves incorporating well-dispersed Ir nanoparticles into a cobalt-based metal-organic framework known as Co-BPDC [Co(bpdc)(H2O)2, BPDC: 4,4'-biphenyldicarboxylic acid]. Ir@Co-BPDC demonstrates exceptional HER activity in alkaline media, surpassing both commercial Pt/C and recent noble-metal catalysts. Theoretical results indicate that electron redistribution, induced by interfacial bonds, optimizes the adsorption energy of water and hydrogen, thereby enhancing our understanding of the superior properties of Ir@Co-BPDC for HER.

Strategically Designed Pd-Induced Changes in Alkaline Hydrogen Evolution Reaction and Oxygen Evolution Reaction Performances of Electrochemical Water Oxidation by the Galvanically Synthesized MoO2/MoO3 Composite Thin Film

Electrochemical water oxidation is believed to be an effective pathway to produce clean, carbon-free, and environmentally sustainable green energy. In this work, we report a simple, easy-to-construct, facile, low-cost, and single-step galvanic technique to synthesize a Pd-supported temperature-assisted MoOx thin film nanocomposite for effective water oxidation. The most suitable nanocomposite exhibits very low overpotential at 10 mA/cm2 with smaller Tafel slope values for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) processes in an alkaline medium. The formation of a metal oxide-metal junction accelerates the growth of more active sites, promoting induced electronic synergism at the MoOx-Pd interface. This endows higher electrical conductivity and faster electron transfer kinetics, thus accelerating the faster water dissociation reaction following the Tafel-Volmer mechanism to boost the HER process in an alkaline medium. The excellent electrochemical HER and OER performances of our electrocatalyst even supersede the accomplishments of the benchmark catalysts Pt/C and RuO2. Moreover, neither of these two catalysts demonstrates both catalytic reactions, i.e., HER and OER at the same time, which have been observed for our synthesized catalyst. Our findings illustrate the potential of a thin-film MoOx-Pd nanocomposite to be an exceedingly effective electrocatalyst developed by interface engineering strategies. This also provides insight into designing several other semiconductor composite catalysts using simple synthesis techniques for highly efficient HER/OER processes that could be alternatives to benchmark electrocatalysts for water electrolysis.

An Amiable Design of Cobalt Single Atoms as the Active Sites for Oxygen Evolution Reaction in Desalinated Seawater

Green fuel from water splitting is hardcore for future generations, and the limited source of fresh water (<1%) is a bottleneck. Seawater cannot be used directly as a feedstock in current electrolyzer techniques. Until now single atom catalysts were reported by many synthetic strategies using notorious chemicals and harsh conditions. A cobalt single-atom (CoSA) intruding cobalt oxide ultrasmall nanoparticle (Co3 O4 USNP)-intercalated porous carbon (PC) (CoSA-Co3 O4 @PC) electrocatalyst was synthesized from the waste orange peel as a single feedstock (solvent/template). The extended X-ray absorption fine structure spectroscopy (EXAFS) and theoretical fitting reveal a clear picture of the coordination environment of the CoSA sites (CoSA-Co3 O4 and CoSA-N4 in PC). To impede the direct seawater corrosion and chlorine evolution the seawater has been desalinated (Dseawater) with minimal cost and the obtained PC is used as an adsorbent in this process. CoSA-Co3 O4 @PC shows high oxygen evolution reaction (OER) activity in transitional metal impurity-free (TMIF) 1 M KOH and alkaline Dseawater. CoSA-Co3 O4 @PC exhibits mass activity that is 15 times higher than the commercial RuO2 . Theoretical interpretations suggest that the optimized CoSA sites in Co3 O4 USNPs reduce the energy barrier for alkaline water dissociation and simultaneously trigger an excellent OER followed by an adsorbate evolution mechanism (AEM).

Unveiling the Critical Role of Surface Hydroxyl Groups for Electro-Assisted Uranium Extraction from Wastewater

The electro-driven extraction of uranium from fluorine-containing uranium wastewater is anticipated to address the challenge of separating fluoro-uranium complexes in conventional technologies. Herein, we developed hydroxy-rich cobalt-based oxides (CoOx) for electro-assisted uranium extraction from fluorine-containing wastewater. Relying on theoretical calculations and other spectral measurements, the hydroxy-rich CoOx nanosheets can enhance the affinity for uranium due to the existence of a substantial quantity of hydroxyl groups. Accordingly, the CoOx nanosheets exhibit outstanding U(VI) removal efficiency in the presence of fluorine ions. Through the utilization of X-ray absorption fine structure (XAFS), we confirm that hydroxy-rich CoOx nanosheets capture free uranyl ions to form a sturdy 2Oax-1U-3Oeq configuration, which can be achieved through electro-driven fluorine-uranium separation. Notably, for the first time, the whole reaction process of uranium species on the CoOx surface from the initial uranium single atom growth to uranium oxide nanosheets is monitored by aberration-corrected transmission electron microscopes (AC-TEM). This work provides a paradigm for the advancement of novel functional materials as electrocatalysts for uranium extraction, as well as a new approach for studying the evolution mechanism of uranium species.

Open-Microcolumn Array: A Novel Approach for Enhanced Electrocatalytic Bubble Desorption in Microreactors

High-efficiency electrocatalytic water splitting requires high intrinsic activity of catalysts and even more importantly favorable mass transfer. However, gas bubbles adhering to the surface of catalysts limit the re-expose of catalytic active sites to the electrolyte and reduce the catalytic activities. The efficient desorption of bubbles can be facilitated by a hierarchical multiscale structure of the electrode surface. Herein, we report an opened periodic three-dimensional electrode composed of iron (Fe)-cobalt (Co)-nickel (Ni) (oxy)hydroxide nanorods (NRs) grown in situ on a high aspect ratio nickel microcolumn array (NCA) for electrocatalytic water splitting. Compared with the flat nickel plate, the NCA not only increases the surface area for catalyst loading but also improves the wettability of the electrolyte on the electrode surface, exhibiting superhydrophilicity/superaerophobicity (the electrolyte and the bubble contact angles were about ∼0 and 163°, respectively), which accelerates the bubble evolution and desorption process. The X-ray photoelectron spectroscopy indicates that the synergy of Fe-Co-Ni could enhance the ratio of Co3+/Co2+ and Ni3+/Ni2+ and promote the electrocatalytic activity. Benefiting from the microstructure design and synergistic effects, the Co4Fe0.5Ni0.5OOH-NR@NCA electrode achieves a superior OER performance with an overpotential of 199 mV at 10 mA·cm-2.

Strain and Surface Engineering of Multicomponent Metallic Nanomaterials with Unconventional Phases

Multicomponent metallic nanomaterials with unconventional phases show great prospects in electrochemical energy storage and conversion, owing to unique crystal structures and abundant structural effects. In this review, we emphasize the progress in the strain and surface engineering of these novel nanomaterials. We start with a brief introduction of the structural configurations of these materials, based on the interaction types between the components. Next, the fundamentals of strain, strain effect in relevant metallic nanomaterials with unconventional phases, and their formation mechanisms are discussed. Then the progress in surface engineering of these multicomponent metallic nanomaterials is demonstrated from the aspects of morphology control, crystallinity control, surface modification, and surface reconstruction. Moreover, the applications of the strain- and surface-engineered unconventional nanomaterials mainly in electrocatalysis are also introduced, where in addition to the catalytic performance, the structure-performance correlations are highlighted. Finally, the challenges and opportunities in this promising field are prospected.

Atomically Dispersed Silver Atoms Embedded in NiCo Layer Double Hydroxide Boost Oxygen Evolution Reaction

Bimetallic layered double hydroxides (LDHs) are promising catalysts for anodic oxygen evolution reaction (OER) in alkaline media. Despite good stability, NiCo LDH displays an unsatisfactory OER activity relative to the most robust NiFe LDH and CoFe LDH. Herein, a novel NiCo LDH electrocatalyst modified with single-atom silver grown on carbon cloth (AgSA -NiCo LDH/CC) that exhibits exceptional OER activity and stability in 1.0 m KOH is reported. The AgSA -NiCo LDH/CC catalyst only requires a low overpotential of 192 mV to reach a current density of 10 mA cm-2 , obviously boosting the OER activity of NiCo LDH/CC (410 mV@10 mA cm-2 ). Inspiringly, AgSA -NiCo LDH/CC can maintain its high activity for up to 500 h at a large current density of 100 mA cm-2 , exceeding most single-atom OER catalysts. In situ Raman spectroscopy studies uncover that the in situ formed NiCoOOH during OER is the real active species. Hard X-ray absorption spectrum (XAS) and density functional theory (DFT) calculations validate that single-atom Ag occupying Ni site increases the chemical valence of Ni elements, and then weakens the adsorption of oxygen-contained intermediates on Ni sites, fundamentally accounting for the enhanced OER performance.

Bimetallic Phosphide Heterostructure Coupled with Ultrathin Carbon Layer Boosting Overall Alkaline Water and Seawater Splitting

Seawater electrolysis is promising for green hydrogen production but hindered by the sluggish reaction kinetics of both cathode and anode, as well as the detrimental chlorine chemistry environment. Herein, a self-supported bimetallic phosphide heterostructure electrode strongly coupled with an ultrathin carbon layer on Fe foam (C@CoP-FeP/FF) is constructed. When used as an electrode for the hydrogen and oxygen evolution reactions (HER/OER) in simulated seawater, the C@CoP-FeP/FF electrode shows overpotentials of 192 mV and 297 mV at 100 mA cm^-2 , respectively. Moreover, the C@CoP-FeP/FF electrode enables the overall simulated seawater splitting at the cell voltage of 1.73 V to achieve 100 mA cm^-2 , and operate stably during 100 h. The superior overall water and seawater splitting properties can be ascribed to the integrated architecture of CoP-FeP heterostructure, strongly coupled carbon protective layer, and self-supported porous current collector. The unique composites can not only provide enriched active sites, ensure prominent intrinsic activity, but also accelerate the electron transfer and mass diffusion. This work confirms the feasibility of an integration strategy for the manufacturing of a promising bifunctional electrode for water and seawater splitting.

Flower-Like Amorphous MoO3- x Stabilized Ru Single Atoms for Efficient Overall Water/Seawater Splitting

Benefitting from the maximum atom utilization efficiency, special size quantum effects and tailored active sites, single-atom catalysts (SACs) have been promising candidates for bifunctional catalysts toward water splitting. Besides, due to the unique structure and properties, some amorphous materials have been found to possess better performance than their crystalline counterparts in electrocatalytic water splitting. Herein, by combining the advantages of ruthenium (Ru) single atoms and amorphous substrates, amorphous molybdenum-based oxide stabilized single-atomic-site Ru (Ru SAs-MoO_{3- x} /NF) catalysts are conceived as a self-supported electrode. By virtue of the large surface area, enhanced intrinsic activity and fast reaction kinetics, the as-prepared Ru SAs-MoO_{3- x} /NF electrode effectively drives both oxygen evolution reaction (209 mV @ 10 mA cm^-2 ) and hydrogen evolution reaction (36 mV @ 10 mA cm^-2 ) in alkaline media. Impressively, the assembled electrolyzer merely requires an ultralow cell voltage of 1.487 V to deliver the current density of 10 mA cm^-2 . Furthermore, such an electrode also exhibits a great application potential in alkaline seawater electrolysis, achieving a current density of 100 mA cm^-2 at a low cell voltage of 1.759 V. In addition, Ru SAs-MoO_{3- x} /NF only has very small current density decay in the long-term constant current water splitting test.

Agarose-gel-based self-limiting synthesis of a bimetal (Fe and Co)-doped composite as a bifunctional catalyst for a zinc-air battery

Exploring efficient noble-metal-free electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial for the development of rechargeable Zn-air batteries. Herein, a self-limiting method using an agarose gel was proposed to prepare bimetallic (iron and cobalt) nitrogen-doped carbon composites (FeCo-NC). The resulting FeCo-NC catalyst has a high surface area and a hierarchical porous structure. The optimized FeCo-NC electrocatalyst exhibits a small potential difference (ΔE) = 0.72 V between the ORR half-wave potential and the OER potential at a current density of 10 mA cm^-2 in alkaline media. Impressively, the FeCo-NC Zn-air battery exhibits a high open-circuit voltage, large power density, and outstanding charge-discharge cycling stability. This study provides an effective means of designing electrocatalysts and energy conversion systems.

Introducing High-Valence Iridium Single Atoms into Bimetal Phosphides toward High-Efficiency Oxygen Evolution and Overall Water Splitting

Single atoms are superior electrocatalysts having high atomic utilization and amazing activity for water oxidation and splitting. Herein, this work reports a thermal reduction method to introduce high-valence iridium (Ir) single atoms into bimetal phosphide (FeNiP) nanoparticles toward high-efficiency oxygen evolution reaction (OER) and overall water splitting. The presence of high-valence single Ir atoms (Ir⁴⁺ ) and their synergistic interaction with Ni³⁺ species as well as the disproportionation of Ni³⁺ assisted by Fe collectively contribute to the exceptional OER performance. In specific, at appropriate Ir/Ni and Fe/Ni ratios, the as-prepared Ir-doped FeNiP (Ir₂₅ -Fe₁₆ Ni₁₀₀ P₆₄ ) nanoparticles at a mass loading of only 35 µg cm^-2 show the overpotential as low as 232 mV at 10 mA cm^-2 and activity as high as 1.86 A mg^-1 at 1.5 V versus RHE for OER in 1.0 m KOH. Computational simulations confirm the vital role of high-valence Ir to weaken the adsorption of OER intermediates, favorable for accelerating OER kinetics. Impressively, a Pt/C||Ir₂₅ -Fe₁₆ Ni₁₀₀ P₆₄ two-electrode alkaline electrolyzer affords a current density of 10 mA cm^-2 at a low cell voltage of 1.42 V, along with satisfied stability. An AA battery with a nominal voltage of 1.5 V can drive overall water splitting with obvious bubbles released.

Ex Situ Reconstruction-Shaped Ir/CoO/Perovskite Heterojunction for Boosted Water Oxidation Reaction

The oxygen evolution reaction (OER) is the performance-limiting step in the process of water splitting. In situ electrochemical conditioning could induce surface reconstruction of various OER electrocatalysts, forming reactive sites dynamically but at the expense of fast cation leaching. Therefore, achieving simultaneous improvement in catalytic activity and stability remains a significant challenge. Herein, we used a scalable cation deficiency-driven exsolution approach to ex situ reconstruct a homogeneous-doped cobaltate precursor into an Ir/CoO/perovskite heterojunction (SCI-350), which served as an active and stable OER electrode. The SCI-350 catalyst exhibited a low overpotential of 240 mV at 10 mA cm^-2 in 1 M KOH and superior durability in practical electrolysis for over 150 h. The outstanding activity is preliminarily attributed to the exponentially enlarged electrochemical surface area for charge accumulation, increasing from 3.3 to 175.5 mF cm^-2. Moreover, density functional theory calculations combined with advanced spectroscopy and ¹⁸O isotope-labeling experiments evidenced the tripled oxygen exchange kinetics, strengthened metal-oxygen hybridization, and engaged lattice oxygen oxidation for O-O coupling on SCI-350. This work presents a promising and feasible strategy for constructing highly active oxide OER electrocatalysts without sacrificing durability.

Transition Metal Single Atoms Constructed by Using Inherent Confined Space

Single-atom catalysts (SACs) show expressively enhanced activity toward diverse reactions due to maximized atomic utilization of metal sites, while their facile, universal, and massive preparation remains a pronounced challenge. Here we report a facile strategy for the preparation of SACs by use of the inherent confined space between the template and silica walls in template-occupied mesoporous silica SBA-15 (TOS). Different transition metal precursors can be introduced into the confined space readily by grinding, and during succeeding calcination single atoms are constructed in the form of M-O-Si (M = Cu, Co, Ni, and Zn). In addition to the generality, the present strategy is easy to scale up and can allow the synthesis of 10 g of SACs in one pot through ball milling. The Cu SAC has been applied for CO₂ cycloaddition of epichlorohydrin, and the activity is obviously higher than the counterpart prepared without confined space and various reported Cu-containing catalysts.

High-Valence-Manganese Driven Strong Anchoring of Iridium Species for Robust Acidic Water Oxidation

Designing an efficient and durable electrocatalyst for the sluggish anodic oxygen evolution reaction (OER) has been the primary goal of using proton exchange membrane electrolyzer owing to the highly acidic and oxidative environment at the anode. In this work, it is reported that high-valence manganese drives the strong anchoring of the Ir species on the manganese dioxide (MnO₂ ) matrix via the formation of an Mn-O-Ir coordination structure through a hydrothermal-redox reaction. The iridium (Ir)-atom-array array is firmly anchored on the Mn-O-Ir coordination structure, endowing the catalyst with excellent OER activity and stability in an acidic environment. Ir-MnO₂ (160)-CC shows an ultralow overpotential of 181 mV at j = 10 mA cm^-2 and maintains long-term stability of 180 h in acidic media with negligible decay, superior to most reported electrocatalysts. In contrast, when reacting with low-valence MnO₂ , Ir species tend to aggregate into IrO_x nanoparticles, leading to poor OER stability. Density functional theory (DFT) calculations further reveal that the formation of the Mn-O-Ir coordination structure can optimize the adsorption strength of *OOH intermediates, thus boosting the acidic OER activity and stability.

Amorphous Metal-Organic Framework-Derived Electrocatalyst to Boost Water Oxidation

Amorphous metal-organic framework (MOF) materials have drawn extensive interest in the design of high-performance electrocatalysts for use in the electrochemical oxygen evolution reaction. However, there are limitations to the utilization of amorphous MOFs due to their low electrical conductivity and unsatisfactory stability. Herein, a novel amorphous-crystalline (AC) heterostructure is successfully constructed by synthesizing a crystalline metal sulfide (MS)-embedded amorphous Ni_0.67Fe_0.33-MOF, namely an MS/Ni_0.67Fe_0.33-MOF. It exhibits excellent catalytic performance (a low overpotential of 248 mV at 10 mA cm^-2 with a small Tafel slope of 50 mV decade^-1), durability, and stability (only 8% degradation of the current density at a constant voltage after 24 h). This work thus sheds light on the engineering of highly efficient catalysts with AC heterointerfaces for optimizing water-splitting systems.

Coupling Transition Metal Compound with Single-Atom Site for Water Splitting Electrocatalysis

Single-atom site catalysts (SACs) provide an ideal platform to identify the active centers, explore the catalytic mechanism, and establish the structure-property relationships, and thus have attracted increasing interests for electrocatalytic energy conversion. Substantial endeavors have been devoted to the construction of carbon-supported SACs, and their progress have been comprehensively reviewed. Compared with carbon-supported SACs, transition metal compounds (TMCs)-supported SACs are still in their infancy in the field of electrocatalysis. However, they have also aroused ever-increasing attention for driving electrocatalytic water splitting, and emerged as an indispensable class of SACs in recent years, predominately owing to their inherently structural features, such as rich anchoring sites, surface defects, and lattice vacancy. Herein, in this review, we have systematically summarized the recent advances of a variety of TMC supported SACs toward electrocatalytic water splitting. The advanced characterization techniques and theoretical analyses for identifying and monitoring the atomic structure of SACs are firstly manifested. Subsequently, the anchoring and stabilization mechanisms for TMC supported SACs are also highlighted. Thereafter, the advances of TMC supported SACs for driving water electrolysis are systematically unraveled.

Alternating Magnetic Field Induced Magnetic Heating in Ferromagnetic Cobalt Single-Atom Catalysts for Efficient Oxygen Evolution Reaction

Alternating magnetic field (AMF) is a promising methodology for further improving magnetic single-atom catalyst (SAC) activity toward oxygen evolution reaction (OER). Herein, the anchoring of Co single atoms on MoS₂ support (Co@MoS₂), leading to the appearance of in-plane room-temperature ferromagnetic properties, is favorable for the parallel spin arrangement of oxygen atoms when a magnetic field is applied. Moreover, field-assisted electrocatalytic experiments confirmed that the spin direction of Co@MoS₂ is changing with the applied magnetic field. On this basis, under AMF, the active sites in ferromagnetic Co@MoS₂ were heated by exploiting the magnetic heating generated from spin polarization flip of these SACs to further expedite OER efficiency, with overpotential at 10 mA cm^-2 reduced from 317 mV to 250 mV. This work introduces a feasible and efficient approach to enhance the OER performance of Co@MoS₂ by AMF, shedding some light on the further development of magnetic SACs for energy conversion.

Effect of Surface‐Adsorbed and Intercalated (Oxy)anions on the Oxygen Evolution Reaction

As the kinetically demanding oxygen evolution reaction (OER) is crucial for the decarbonization of our society, a wide range of (pre)catalysts with various non‐active‐site elements (e.g., Mo, S, Se, N, P, C, Si…) have been investigated. Thermodynamics dictate that these elements oxidize during industrial operation. The formed oxyanions are water soluble and thus predominantly leach in a reconstruction process. Nevertheless, recently, it was unveiled that these thermodynamically stable (oxy)anions can adsorb on the surface or intercalate in the interlayer space of the active catalyst. There, they tune the electronic properties of the active sites and can interact with the reaction intermediates, changing the OER kinetics and potentially breaking the persisting OER *OH/*OOH scaling relations. Thus, the addition of (oxy)anions to the electrolyte opens a new design dimension for OER catalysis and the herein discussed observations deepen the understanding of the role of anions in the OER.

Defect and Interface Engineering of Three-Dimensional Open Nanonetcage Electrocatalysts for Advanced Electrocatalytic Oxygen Evolution Reaction

Defect engineering and interface engineering are two efficient approaches to promote the electrocatalytic performance of transition metal oxides (TMOs) by modulating the local electronic structure and inducing a synergistic effect but usually require costly and complicated processes. Herein, a facile electrochemical etching method is proposed for the controllable tailoring of the defects in a three-dimensional (3D) open nanonetcage CoZnRuO_x heterostructure via the in situ electrochemical etching to remove partial ZnO. The highly open 3D nanostructures, numerous defects, and multicomponent heterointerfaces endow the CoZnRuO_x nanonetcages with more accessible active sites, moderated local electronic structure, and strong synergistic effect, thereby enabling them to not only deliver an ultralow overpotential (244 mV @ 10 mA cm^-2) for oxygen evolution reaction (OER) but also high-performance overall water electrolysis by coupling with commercial Pt/C, with a potential of 1.52 V at 10 mA cm^-2. Moreover, experiments and characterizations also reveal that the remaining Zn²⁺ can facilitate OH^- adsorption and charge transfer, which also further improves the electrocatalytic OER performance. This work proposes a promising strategy for creating surface defects in heterostructured TMOs and provides insights to understand the defect- and interface-induced enhancement of OER electrocatalysis.

Homogeneity of Supported Single-Atom Active Sites Boosting the Selective Catalytic Transformations

Selective conversion of specific functional groups to desired products is highly important but still challenging in industrial catalytic processes. The adsorption state of surface species is the key factor in modulating the conversion of functional groups, which is correspondingly determined by the uniformity of active sites. However, the non-identical number of metal atoms, geometric shape, and morphology of conventional nanometer-sized metal particles/clusters normally lead to the non-uniform active sites with diverse geometric configurations and local coordination environments, which causes the distinct adsorption states of surface species. Hence, it is highly desired to modulate the homogeneity of the active sites so that the catalytic transformations can be better confined to the desired direction. In this review, the construction strategies and characterization techniques of the uniform active sites that are atomically dispersed on various supports are examined. In particular, their unique behavior in boosting the catalytic performance in various chemical transformations is discussed, including selective hydrogenation, selective oxidation, Suzuki coupling, and other catalytic reactions. In addition, the dynamic evolution of the active sites under reaction conditions and the industrial utilization of the single-atom catalysts are highlighted. Finally, the current challenges and frontiers are identified, and the perspectives on this flourishing field is provided.

Surface Design Strategy of Catalysts for Water Electrolysis

Hydrogen, a new energy carrier that can replace traditional fossil fuels, is seen as one of the most promising clean energy sources. The use of renewable electricity to drive hydrogen production has very broad prospects for addressing energy and environmental problems. Therefore, many researchers favor electrolytic water due to its green and low-cost advantages. The electrolytic water reaction comprises the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Understanding the OER and HER mechanisms in acidic and alkaline processes contributes to further studying the design of surface regulation of electrolytic water catalysts. The OER and HER catalysts are mainly reviewed for defects, doping, alloying, surface reconstruction, crystal surface structure, and heterostructures. Besides, recent catalysts for overall water splitting are also reviewed. Finally, this review paves the way to the rational design and synthesis of new materials for highly efficient electrocatalysis.

Operando High-Valence Cr-Modified NiFe Hydroxides for Water Oxidation

High-valence metal-doped multimetal (oxy)hydroxides outperform noble metal electrocatalysts for the oxygen evolution reaction (OER) owing to the modified energetics between 3d metals and high-valence dopants. However, the rational design of sufficient and subtle modulators is still challenging. With a multimetal layered double hydroxide (LDH) as the OER catalyst, this study introduces a series of operando high-valence dopants (Cr, Ru, Ce, and V), which can restrict the 3+ valence states in the LDH template to prevent phase separation and operando transfer to the >3+ valence states for sufficient electronic interaction during the OER process. Through density functional theory simulations, ultrathin Cr-doped NiFe (NiFeCr) LDH is synthesized with strong electronic interaction between Cr dopants and NiFe bimetallic sites, evidenced by X-ray absorption spectroscopy. The resulting NiFeCr-LDH catalyzes the OER with ultralow overpotentials of 189 and 284 mV, obtaining current densities of 10 and 1000 mA cm^-2 , respectively. Further, a NiFeCr-LDH anode is coupled in the anion exchange membrane electrolyzers to promote alkaline water splitting and CO₂ -to-CO electrolysis, which achieves low full cell voltages at high current densities.

Large-Scale Synthesis of Spinel Nix Mn3-x O4 Solid Solution Immobilized with Iridium Single Atoms for Efficient Alkaline Seawater Electrolysis

Seawater electrolysis not only affords a promising approach to produce clean hydrogen fuel but also alleviates the bottleneck of freshwater feeds. Here, a novel strategy for large-scale preparing spinel Ni_x Mn_3-x O₄ solid solution immobilized with iridium single-atoms (Ir-SAs) is developed by the sol-gel method. Benefitting from the surface-exposed Ir-SAs, Ir₁ /Ni_1.6 Mn_1.4 O₄ reveals boosted oxygen evolution reaction (OER) performance, achieving overpotentials of 330 and 350 mV at current densities of 100 and 200 mA cm^-2 in alkaline seawater. Moreover, only a cell voltage of 1.50 V is required to reach 500 mA cm^-2 with assembled Ir₁ /Ni_1.6 Mn_1.4 O₄ ‖Pt/C electrode pair under the industrial operating condition. The experimental characterizations and theoretical calculations highlight the effect of Ir-SAs on improving the intrinsic OER activity and facilitating surface charge transfer kinetics, and evidence the energetically stabilized *OOH and the destabilized chloride ion adsorption in Ir₁ /Ni_1.6 Mn_1.4 O₄ . This work demonstrates an effective method to produce efficient alkaline seawater electrocatalyst massively.

Modulating the Local Coordination Environment of Single-Atom Catalysts for Enhanced Catalytic Performance in Hydrogen/Oxygen Evolution Reaction

Single-atom catalysts (SACs) hold the promise of utilizing 100% of the participating atoms in a reaction as active catalytic sites, achieving a remarkable boost in catalytic efficiency. Thus, they present great potential for noble metal-based electrochemical application systems, such as water electrolyzers and fuel cells. However, their practical applications are severely hindered by intrinsic complications, namely atom agglomeration and relocation, originating from the uncontrollably high surface energy of isolated single-atoms (SAs) during postsynthetic treatment processes or catalytic reactions. Extensive efforts have been made to develop new methodologies for strengthening the interactions between SAs and supports, which could ensure the desired stability of the active catalytic sites and their full utilization by SACs. This review covers the recent progress in SACs development while emphasizing the association between the regulation of coordination environments (e.g., coordination atoms, numbers, sites, structures) and the electrocatalytic performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The crucial role of coordination chemistry in modifying the intrinsic properties of SACs and manipulating their metal-loading, stability, and catalytic properties is elucidated. Finally, the future challenges of SACS development and the industrial outlook of this field are discussed.

Ultrahigh oxygen evolution reaction activity in Au doped co-based nanosheets

Oxygen evolution reaction (OER) has attracted enormous interest as a key process for water electrolysis over the past years. The advance of this process relies on an effective catalyst. Herein, we employed single-atom Au doped Co-based nanosheets (NSs) to theoretically and experimentally evaluate the OER activity and also the interaction between Co and Au. We reveal that Au-Co(OH)₂ NSs achieved a low overpotential of 0.26 V at 10 mA cm^-2. This extraordinary phenomenon presents an overall superior performance greater than state-of-the-art Co-based catalysts in a sequence of α-Co(OH)₂ < Co₃O₄ < CoOOH < Au-Co(OH)₂. With ab initio calculations and analysis in the specific Au-Co(OH)₂ configuration, we reveal that OER on highly active Au-Co(OH)₂ originates from lattice oxygen, which is different from the conventional adsorbate evolution scheme. Explicitly, the configuration of Au-Co(OH)₂ gives rise to oxygen non-bonding (O_NB) states and oxygen holes, allowing direct O-O bond formation by a couple of oxidized oxygen with oxygen holes, offering a high OER activity. This study provides new insights for elucidating the origins of activity and synthesizing efficient OER electrocatalysts.

Semiconducting Polymers for Oxygen Evolution Reaction under Light Illumination

Sunlight-driven water splitting to produce hydrogen fuel has stimulated intensive scientific interest, as this technology has the potential to revolutionize fossil fuel-based energy systems in modern society. The oxygen evolution reaction (OER) determines the performance of overall water splitting owing to its sluggish kinetics with multielectron transfer processing. Polymeric photocatalysts have recently been developed for the OER, and substantial progress has been realized in this emerging research field. In this Review, the focus is on the photocatalytic technologies and materials of polymeric photocatalysts for the OER. Two practical systems, namely, particle suspension systems and film-based photoelectrochemical systems, form two main sections. The concept is reviewed in terms of thermodynamics and kinetics, and polymeric photocatalysts are discussed based on three key characteristics, namely, light absorption, charge separation and transfer, and surface oxidation reactions. A satisfactory OER performance by polymeric photocatalysts will eventually offer a platform to achieve overall water splitting and other advanced applications in a cost-effective, sustainable, and renewable manner using solar energy.

A Fe-doped Co-oxide Electrocatalyst Synthesized Through Post-Modification Method Toward Advanced Water Oxidation

In the context of the ever-increasing energy crisis, electrocatalytic water splitting has attracted widespread attention as an effective means to provide clean energy. However, the oxygen evolution reaction (OER), which...

Engineering Lattice Oxygen Activation of Iridium Clusters Stabilized on Amorphous Bimetal Borides Array for Oxygen Evolution Reaction

Developing robust oxygen evolution reaction (OER) catalysts requires significant advances in material design and in-depth understanding for water electrolysis. Herein, we report iridium clusters stabilized surface reconstructed oxyhydroxides on amorphous metal borides array, achieving an ultralow overpotential of 178 mV at 10 mA cm^-2 for OER in alkaline medium. The coupling of iridium clusters induced the formation of high valence cobalt species and Ir-O-Co bridge between iridium and oxyhydroxides at the atomic scale, engineering lattice oxygen activation and non-concerted proton-electron transfer to trigger multiple active sites for intrinsic pH-dependent OER activity. The lattice oxygen oxidation mechanism (LOM) was confirmed by in situ ¹⁸ O isotope labeling mass spectrometry and chemical recognition of negative peroxo-like species. Theoretical simulations reveal that the OER performance on this catalyst is intrinsically dominated by LOM pathway, facilitating the reaction kinetics. This work not only paves an avenue for the rational design of electrocatalysts, but also serves the fundamental insights into the lattice oxygen participation for promising OER application.

In Situ Transformation of Metal-Organic Frameworks into Hollow Nickel-Cobalt Double Hydroxide Arrays for Efficient Water Oxidation

Developing earth-abundant electrocatalysts for efficient oxygen evolution reaction (OER) is of paramount significance for electrochemical water splitting. Herein, an efficient in situ etching-deposition growth strategy is employed to transform pristine two-dimensional (2D) Co-metal-organic frameworks into hollow Ni/Co double hydroxide arrays (denoted as Ni/Co-DH), which not only yields a larger surface area and exposes more active sites but also decreases the activation energy to the OER. With structural and compositional benefits, the Ni/Co-DH exhibits high performance with an overpotential of 229 mV at 10 mA cm^-2 and exceptional long-term stability of over 90 h in 1 M KOH medium for OER, comparable to most non-noble oxygen evolution catalysts reported so far. In addition, a two-electrode Ni/Co-DH∥Pt/C electrolyzer also requires a considerably low voltage of 1.58 V at 10 mA cm^-2 for overall water splitting. This study affords a rational strategy to develop water-alkali electrolyzers with great complexity for large-scale water-splitting systems.

Optimizing Hydrogen Binding on Ru Sites with RuCo Alloy Nanosheets for Efficient Alkaline Hydrogen Evolution

Ruthenium (Ru)‐based catalysts, with considerable performance and desirable cost, are becoming highly interesting candidates to replace platinum (Pt) in the alkaline hydrogen evolution reaction (HER). The hydrogen binding at Ru sites (Ru−H) is an important factor limiting the HER activity. Herein, density functional theory (DFT) simulations show that the essence of Ru−H binding energy is the strong interaction between the 4dz2 orbital of Ru and the 1s orbital of H. The charge transfer between Ru sites and substrates (Co and Ni) causes the appropriate downward shift of the 4dz2 ‐band center of Ru, which results in a Gibbs free energy of 0.022 eV for H* in the RuCo system, much lower than the 0.133 eV in the pure Ru system. This theoretical prediction has been experimentally confirmed using RuCo alloy‐nanosheets (RuCo ANSs). They were prepared via a fast co‐precipitation method followed with a mild electrochemical reduction. Structure characterizations reveal that the Ru atoms are embedded into the Co substrate as isolated active sites with a planar symmetric and Z‐direction asymmetric coordination structure, obtaining an optimal 4dz2 modulated electronic structure. Hydrogen sensor and temperature program desorption (TPD) tests demonstrate the enhanced Ru−H interactions in RuCo ANSs compared to those in pure Ru nanoparticles. As a result, the RuCo ANSs reach an ultra‐low overpotential of 10 mV at 10 mA cm⁻² and a Tafel slope of 20.6 mV dec⁻¹ in 1 M KOH, outperforming that of the commercial Pt/C. This holistic work provides a new insight to promote alkaline HER by optimizing the metal‐H binding energy of active sites.

Interfacial processes in electrochemical energy systems

Electrochemical energy systems such as batteries, water electrolyzers, and fuel cells are considered as promising and sustainable energy storage and conversion devices due to their high energy densities and zero or negative carbon dioxide emission. However, their widespread applications are hindered by many technical challenges, such as the low efficiency and poor long-term cyclability, which are mostly affected by the changes at the reactant/electrode/electrolyte interfaces. These interfacial processes involve ion/electron transfer, molecular/ion adsorption/desorption, and complex interface restructuring, which lead to irreversible modifications to the electrodes and the electrolyte. The understanding of these interfacial processes is thus crucial to provide strategies for solving those problems. In this review, we will discuss different interfacial processes at three representative interfaces, namely, solid-gas, solid-liquid, and solid-solid, in various electrochemical energy systems, and how they could influence the performance of electrochemical systems.