Acceleration of Electrochemical CO2 Reduction to Formate at the Sn/Reduced Graphene Oxide Interface

Delivery of carbon dioxide to an electrode surface using a nanopipette

We have developed a new scanning probe approach for the delivery of a gas-phase reactant to the surface of an electrocatalyst through a self-replenishing bubble located at the end of a scanning probe. This approach enables local electrocatalytic rates to be detected under very-high mass transport rates due to the small distance between the gas-phase reactant in the bubble and the electrocatalyst surface. Here we report experiments for the delivery of carbon dioxide to a gold ultramicroelectrode surface using a micron-scale nanopipette. The approach curve profiles that we measure suggest a complex interplay between carbon dioxide reduction and hydrogen evolution which is mediated by both the probe-electrode distance and the potential of the gold ultramicroelectrode.

Surface Area-Enhanced Cerium and Sulfur-Modified Hierarchical Bismuth Oxide Nanosheets for Electrochemical Carbon Dioxide Reduction to Formate

Electrochemical carbon dioxide reduction reaction (ECO2RR) is a promising approach to synthesize fuels and value-added chemical feedstocks while reducing atmospheric CO2 levels. Here, high surface area cerium and sulfur-doped hierarchical bismuth oxide nanosheets (Ce@S-Bi2O3) are develpoed by a solvothermal method. The resulting Ce@S-Bi2O3 electrocatalyst shows a maximum formate Faradaic efficiency (FE) of 92.5% and a current density of 42.09 mA cm-2 at -1.16 V versus RHE using a traditional H-cell system. Furthermore, using a three-chamber gas diffusion electrode (GDE) reactor, a maximum formate FE of 85% is achieved in a wide range of applied potentials (-0.86 to -1.36 V vs RHE) using Ce@S-Bi2O3. The density functional theory (DFT) results show that doping of Ce and S in Bi2O3 enhances formate production by weakening the OH* and H* species. Moreover, DFT calculations reveal that *OCHO is a dominant pathway on Ce@S-Bi2O3 that leads to efficient formate production. This study opens up new avenues for designing metal and element-doped electrocatalysts to improve the catalytic activity and selectivity for ECO2RR.

Nanostructured cobalt/copper catalysts for efficient electrochemical carbon dioxide reduction

The search for an efficient and stable catalyst for the electrochemical reduction of CO2 to value-added chemicals is especially critical for lowering the atmospheric CO2 concentration. In this study, self-supported cobalt/copper nanostructured catalysts were designed, where the influences of the elemental composition and acid-etching on their efficiency towards the CO2 reduction reaction were studied. The developed Co/Cu catalysts showed superb catalytic activity with a low onset potential at -0.2 V vs. RHE. Gas and liquid product analysis revealed that formate and CO were the main products. It was observed that lower reductive potentials were favourable for formate production, while higher reductive potentials were more favourable for CO formation. In situ electrochemical FTIR studies were further conducted to gain insight into the CO2 reduction mechanism. The novel synthetic procedure reported in this study leads to promising electrocatalysts with high efficiencies for the conversion of CO2 into valuable products.

Five years of scanning electrochemical cell microscopy (SECCM): new insights and innovations

Scanning electrochemical cell microscopy (SECCM) is a nanopipette-based technique which enables measurement of localised electrochemistry. SECCM has found use in a wide range of electrochemical applications, and due to the wider uptake of this technique in recent years, new applications and techniques have been developed. This minireview has collected all SECCM research articles published in the last 5 years, to demonstrate and celebrate the recent advances, and to make it easier for SECCM researchers to remain well-informed. The wide range of SECCM applications is demonstrated, which are categorised here into electrocatalysis, electroanalysis, photoelectrochemistry, biological materials, energy storage materials, corrosion, electrosynthesis, and instrumental development. In the collection of this library of SECCM studies, a few key trends emerge. (1) The range of materials and processes explored with SECCM has grown, with new applications emerging constantly. (2) The instrumental capabilities of SECCM have grown, with creative techniques being developed from research groups worldwide. (3) The SECCM research community has grown significantly, with adoption of the SECCM technique becoming more prominent.

Growth and Electrochemical Study of Bismuth Nanodendrites as an Efficient Catalyst for CO2 Reduction

There is a growing interest in creating cost-effective catalysts for efficient electrochemical CO2 reduction to address pressing environmental issues and produce valuable products. A bimetallic ZnBi catalyst that enhances catalytic activity and stability toward the electrochemical reduction of CO2 is designed. It is based on bismuth nanodendrites grown using a facile, scalable, and low-cost method. The results have shown that the incorporation of bismuth can decrease the charge transfer resistance and facilitate CO2 reduction toward the formation of CO and formate. It was revealed that the ZnBi catalyst exhibited higher catalytic activity compared with that of the pure Zn catalyst for CO2 reduction, with a lower onset potential [-0.75 V vs a reversible hydrogen electrode (RHE) compared with -0.85 V vs RHE for Zn]. In situ electrochemical attenuated total internal reflection Fourier transform infrared spectroscopy was employed to study the reaction mechanism, showing the formation of CO and formate through the adsorbed *COO- intermediates. This study has demonstrated a new approach for the feasible synthesis of high-performance catalysts for large-scale electrochemical CO2 reduction.

Regulation Strategy of Nanostructured Engineering on Indium-Based Materials for Electrocatalytic Conversion of CO2

Electrochemical carbon dioxide reduction (CO2 RR), as an emerging technology, can combine with sustainable energies to convert CO2 into high value-added products, providing an effective pathway to realize carbon neutrality. However, the high activation energy of CO2 , low mass transfer, and competitive hydrogen evolution reaction (HER) leads to the unsatisfied catalytic activity. Recently, Indium (In)-based materials have attracted significant attention in CO2 RR and a series of regulation strategies of nanostructured engineering are exploited to rationally design various advanced In-based electrocatalysts, which forces the necessary of a comprehensive and fundamental summary, but there is still a scarcity. Herein, this review provides a systematic discussion of the nanostructure engineering of In-based materials for the efficient electrocatalytic conversion of CO2 to fuels. These efficient regulation strategies including morphology, size, composition, defects, surface modification, interfacial structure, alloying, and single-atom structure, are summarized for exploring the internal relationship between the CO2 RR performance and the physicochemical properties of In-based catalysts. The correlation of electronic structure and adsorption behavior of reaction intermediates are highlighted to gain in-depth understanding of catalytic reaction kinetics for CO2 RR. Moreover, the challenges and opportunities of In-based materials are proposed, which is expected to inspire the development of other effective catalysts for CO2 RR.

Br-doped Cu nanoparticle formed by in situ restructuring for highly efficient electrochemical reduction of CO2 to formate

Electrochemical conversion of CO2 into chemical feedstock, such as an energy-dense liquid product (formate), is desirable to address the excessive emission of greenhouse gases and store energy. Cu-based catalysts exhibit great advantages in electrochemical CO2 reduction reaction (eCO2RR) due to their low cost and high abundance, but suffer from low selectivity of formate. In this work, a facile one-pot approach is developed to synthesize CuBr nanoparticle (CuBr NP) that can conduct in situ dynamic restructuring during eCO2RR to generate Br-doped Cu NP. The in situ-formed Br-doped Cu NP can afford up to 91.6% Faradaic efficiency (FE) for formate production with a partial current density of 15.1 mA·cm-2 at -0.94 V vs. reversible hydrogen electrode (RHE) in an H-type cell. Moreover, Br-doped Cu NP can deliver excellent long-term stability for up to 25 h. The first-principles density functional theory (DFT) calculations show that the doped Br can regulate the electronic structure of Cu active sites to optimize the adsorption of the HCOO* intermediate, greatly hindering the formation of CO and H2. This work provides a strategy for electronic modulation of metal active site and suggests new opportunities in high selectivity for electrocatalytic reduction of CO2 to formate over Cu-based catalysts.

Enhancing Local CO2 Adsorption by L-histidine Incorporation for Selective Formate Production Over the Wide Potential Window

Electrochemical carbon dioxide reduction reaction (CO2 RR) to produce valuable chemicals is a promising pathway to alleviate the energy crisis and global warming issues. However, simultaneously achieving high Faradaic efficiency (FE) and current densities of CO2 RR in a wide potential range remains as a huge challenge for practical implements. Herein, we demonstrate that incorporating bismuth-based (BH) catalysts with L-histidine, a common amino acid molecule of proteins, is an effective strategy to overcome the inherent trade-off between the activity and selectivity. Benefiting from the significantly enhanced CO2 adsorption capability and promoted electron-rich nature by L-histidine integrity, the BH catalyst exhibits excellent FEformate in the unprecedented wide potential windows (>90 % within -0.1--1.8 V and >95 % within -0.2--1.6 V versus reversible hydrogen electrode, RHE). Excellent CO2 RR performance can still be achieved under the low-concentration CO2 feeding (e.g., 20 vol.%). Besides, an extremely low onset potential of -0.05 VRHE (close to the theoretical thermodynamic potential of -0.02 VRHE ) was detected by in situ ultraviolet-visible (UV-Vis) measurements, together with stable operation over 50 h with preserved FEformate of ≈95 % and high partial current density of 326.2 mA cm-2 at -1.0 VRHE .

Boron Dopant Modulated Electron Localization of Tin Oxide for Efficient Electrochemical CO2 Reduction to Formate

Sn-based electrocatalysts have great economic potential in the reduction of CO2 to HCOOH, while they still suffer from low current density, dissatisfactory selectivity, and poor stability. Inspired by electronic modification engineering, boron-doped SnO2 nanospheres (B-SnO2 ) are successfully synthesized to achieve high-efficiency CO2 reduction reaction (CO2 RR). It is found that the introduction of boron dopants can increase the number of active sites and facilitate the formation of the electron-rich Sn sites in its structure, thus enhancing the activation of CO2 molecules and reducing the energy barrier of *OCHO intermediates on the SnO2 surface. Thus, the B-doped SnO2 electrocatalyst exhibits a remarkable FEHCOOH above 90% within a broad potential window of -0.7 to -1.3 V versus reversible hydrogen electrode (RHE) (600 mV) and obtains the maximum value of 95.1% (the partial current density of HCOOH is 42.35 mA cm-2 ) at -1 V versus RHE. In conclusion, this work provides a novel strategy for optimizing the intrinsic properties of electrocatalysts for CO2 RR by the method of tuning the electronic structure.

Metal functionalization of two-dimensional nanomaterials for electrochemical carbon dioxide reduction

With the mechanical exfoliation of graphene in 2004, researchers around the world have devoted significant efforts to the study of two-dimensional (2D) nanomaterials. Nowadays, 2D nanomaterials are being developed into a large family with varieties of structures and derivatives. Due to their fascinating electronic, chemical, and physical properties, 2D nanomaterials are becoming an important type of catalyst for the electrochemical carbon dioxide reduction reaction (CO₂RR). Here, we review the recent progress in electrochemical CO₂RR using 2D nanomaterial-based catalysts. First, we briefly describe the reaction mechanism of electrochemical CO₂ reduction to single-carbon (C₁) and multi-carbon (C₂₊) products. Then, we discuss the strategies and principles for applying metal materials to functionalize 2D nanomaterials, such as graphene-based materials, metal-organic frameworks (MOFs), and transition metal dichalcogenides (TMDs), as well as applications of resultant materials in the electrocatalytic CO₂RR. Finally, we summarize the present research advances and highlight the current challenges and future opportunities of using metal-functionalized 2D nanomaterials in the electrochemical CO₂RR.

Kinetic Understanding of Catalytic Selectivity and Product Distribution of Electrochemical Carbon Dioxide Reduction Reaction

CO₂ can be electrochemically reduced to different products depending on the nature of catalysts. In this work, we report comprehensive kinetic studies on catalytic selectivity and product distribution of the CO₂ reduction reaction on various metal surfaces. The influences on reaction kinetics can be clearly analyzed from the variation of reaction driving force (binding energy difference) and reaction resistance (reorganization energy). Moreover, the CO₂RR product distributions are further affected by external factors such as electrode potential and solution pH. A potential-mediated mechanism is found to determine the competing two-electron reduction products of CO₂ that shifts from thermodynamics-controlled product formic acid at less negative electrode potentials to kinetic-controlled product CO at more negative electrode potentials. Based on detailed kinetic simulations, a three-parameter descriptor is applied to identify the catalytic selectivity of CO, formate, hydrocarbons/alcohols, as well as side product H₂. The present kinetic study not only well explains the catalytic selectivity and product distribution of experimental results but also provides a fast way for catalyst screening.

Operando Scanning Electrochemical Probe Microscopy during Electrocatalysis

Scanning electrochemical probe microscopy (SEPM) techniques can disclose the local electrochemical reactivity of interfaces in single-entity and sub-entity studies. Operando SEPM measurements consist of using a SEPM tip to investigate the performance of electrocatalysts, while the reactivity of the interface is simultaneously modulated. This powerful combination can correlate electrochemical activity with changes in surface properties, e.g., topography and structure, as well as provide insight into reaction mechanisms. The focus of this review is to reveal the recent progress in local SEPM measurements of the catalytic activity of a surface toward the reduction and evolution of O₂ and H₂ and electrochemical conversion of CO₂. The capabilities of SEPMs are showcased, and the possibility of coupling other techniques to SEPMs is presented. Emphasis is given to scanning electrochemical microscopy (SECM), scanning ion conductance microscopy (SICM), electrochemical scanning tunneling microscopy (EC-STM), and scanning electrochemical cell microscopy (SECCM).

Metal-free reduction of CO2 to formate using a photochemical organohydride-catalyst recycling strategy

Increasing levels of CO₂ in the atmosphere is a problem that must be urgently resolved if the rise in current global temperatures is to be slowed. Chemically reducing CO₂ into compounds that are useful as energy sources and carbon-based materials could be helpful in this regard. However, for the CO₂ reduction reaction (CO₂RR) to be operational on a global scale, the catalyst system must: use only renewable energy, be built from abundantly available elements and not require high-energy reactants. Although light is an attractive renewable energy source, most existing CO₂RR methods use electricity and many of the catalysts used are based on rare heavy metals. Here we present a transition-metal-free catalyst system that uses an organohydride catalyst based on benzimidazoline for the CO₂RR that can be regenerated using a carbazole photosensitizer and visible light. The system is capable of producing formate with a turnover number exceeding 8,000 and generates no other reduced products (such as H₂ and CO).

CeO2 Promotes CO2 Electroreduction to Formate on Bi2S3 via Tuning of the *OCHO Intermediate

Formate is identified as economically viable chemical fuel from electrochemical carbon dioxide reduction. However, the selectivity of current catalysts toward formate is limited by the competitive reaction such as HER. Herein, we propose a CeO₂ modification strategy to improve the selectivity of catalysts for formate through tuning of the *OCHO intermediate, which is important for formate production.

Halogen-Incorporated Sn Catalysts for Selective Electrochemical CO2 Reduction to Formate

Electrochemically reducing CO₂ to valuable fuels or feedstocks is recognized as a promising strategy to simultaneously tackle the crises of fossil fuel shortage and carbon emission. Sn-based catalysts have been widely studied for electrochemical CO₂ reduction reaction (CO₂ RR) to make formic acid/formate, which unfortunately still suffer from low activity, selectivity and stability. In this work, halogen (F, Cl, Br or I) was introduced into the Sn catalyst by a facile hydrolysis method. The presence of halogen was confirmed by a collection of ex situ and in situ characterizations, which rendered a more positive valence state of Sn in halogen-incorporated Sn catalyst as compared to unmodified Sn under cathodic potentials in CO₂ RR and therefore tuned the adsorption strength of the key intermediate (*OCHO) toward formate formation. As a result, the halogen-incorporated Sn catalyst exhibited greatly enhanced catalytic performance in electrochemical CO₂ RR to produce formate.

Bionic Construction of Helical Bi2 O3 Microfibers for Highly Efficient CO2 Electroreduction

Helical Bi₂ O₃ microfibers (HBM) were prepared with the assistance of cotton template through a simple heating treatment in air. This twisted structure induced the lattice strains, enriched the oxygen vacancies of Bi₂ O₃ , and promoted the sufficient exposure of active sites simultaneously, thus performing outstanding activity and selectivity as catalyst for CO₂ electroreduction to formate. The faradaic efficiency (FE) of formate reached 100.4±1.9 % at -0.90 V vs. reversible hydrogen electrode (RHE) in an H-cell, and the partial current density was boosted to 226 mA cm^-2 with FE_formate of 96 % at -1.08 V vs. RHE in a flow cell. This work may open a new era for construction of metal oxide fibers by bionic strategy as high-performance electrocatalysts.

Nanostructure Engineering of Sn-Based Catalysts for Efficient Electrochemical CO2 Reduction

Excessive anthropogenic CO₂ emission has caused a series of ecological and environmental issues, which threatens mankind's sustainable development. Mimicking the natural photosynthesis process (i.e., artificial photosynthesis) by electrochemically converting CO₂ into value-added products is a promising way to alleviate CO₂ emission and relieve the dependence on fossil fuels. Recently, Sn-based catalysts have attracted increasing research attentions due to the merits of low price, abundance, non-toxicity, and environmental benignancy. In this review, the paradigm of nanostructure engineering for efficient electrochemical CO₂ reduction (ECO₂ R) on Sn-based catalysts is systematically summarized. First, the nanostructure engineering of size, composition, atomic structure, morphology, defect, surficial modification, catalyst/substrate interface, and single-atom structure, are systematically discussed. The influence of nanostructure engineering on the electronic structure and adsorption property of intermediates, as well as the performance of Sn-based catalysts for ECO₂ R are highlighted. Second, the potential chemical state changes and the role of surface hydroxides on Sn-based catalysts during ECO₂ R are introduced. Third, the challenges and opportunities of Sn-based catalysts for ECO₂ R are proposed. It is expected that this review inspires the further development of highly efficient Sn-based catalysts, meanwhile offer protocols for the investigation of Sn-based catalysts.

Surface-Oxygen-Rich Bi@C Nanoparticles for High-Efficiency Electroreduction of CO2 to Formate

The electrochemical CO₂ reduction reaction (CO₂RR) is a promising strategy to alleviate excessive CO₂ levels in the atmosphere and produce value-added feedstocks and fuels. However, the synthesis of high-efficiency and robust electrocatalysts remains a great challenge. This work reports the green preparation of surface-oxygen-rich carbon-nanorod-supported bismuth nanoparticles (SOR Bi@C NPs) for an efficient CO₂RR toward formate. The resultant SOR Bi@C NPs catalyst displays a Faradaic efficiency of more than 91% for formate generation over a wide potential range of 440 mV. Ex situ XPS and XANES and in situ Raman spectroscopy demonstrate that the Bi-O/Bi (110) structure in the pristine SOR Bi@C NPs can remain stable during the CO₂RR process. DFT calculations reveal that the Bi-O/Bi (110) structure can facilitate the formation of the *OCHO intermediate. This work provides an approach to the development of high-efficiency Bi-based catalysts for the CO₂RR and offers a unique insight into the exploration of advanced electrocatalysts.

Selective Reduction of CO2 on Ti2C(OH)2 MXene through Spontaneous Crossing of Transition States

Direct reduction of gas-phase CO₂ to renewable fuels and chemical feedstock without any external energy source or rare-metal catalyst is one of the foremost challenges. Here, using density functional theory and ab initio molecular dynamics (AIMD) simulations, we predict Ti₂C(OH)₂ MXene as an efficient electron-coupled proton donor exhibiting simultaneously high reactivity and selectivity for CO₂ reduction reaction (CRR) by yielding valuable chemicals, formate, and formic acid. This is caused by CO₂ spontaneously crossing the activation barrier involved in the formation of multiple intermediates. Metallic Ti₂C(OH)₂ contains easily donatable protons on the surface and high-energy electrons near the Fermi level that leads to its high reactivity. High selectivity arises from low activation barrier for CRR as predicted by proposed mechanistic interpretations. Furthermore, H vacancies generated during the product formation can be replenished by exposure to moisture, ensuring the uninterrupted formation of the products. Our study provides a single-step solution for CRR to valuable chemicals without necessitating the expensive electrochemical or low-efficiency photochemical cells and hence is of immense interest for recycling the carbon.

Metal-Organic Framework-Derived BiIn Bimetallic Oxide Nanoparticles Embedded in Carbon Networks for Efficient Electrochemical Reduction of CO2 to Formate

Bismuth-based catalysts exhibit excellent activity and selectivity for the electroreduction of carbon dioxide (CO₂). However, single-component bismuth-based catalysts are not satisfactory for the electrochemical reduction of CO₂ to formic acid, mainly due to their high hydrogen production, low electrical conductivity, and small catalytic current density. Herein, we used a coordination strategy to recombine Bi and In at the molecular level to form Bi/In bimetallic metal-organic frameworks (MOFs), which were then calcined to obtain MOF-derived Bi/In bimetallic oxide nanoparticles embedded in carbon networks. Thanks to the synergistic effect of bimetallic components, high specific surface area, suitable pore size distribution, and high electrical conductivity of the carbon network, the material exhibits excellent activity and selectivity for electroreduction of CO₂ to formate. In H-type electrolyzers, the formate Faradaic efficiency reaches 91% at -0.9 V (vs RHE) and does not decrease significantly within 48 h. In situ Fourier transform infrared spectroscopy confirms the reaction intermediates and reveals that CO₂ electroreduction is dominant by the *OCHO pathway.

Screening Surface Structure-Electrochemical Activity Relationships of Copper Electrodes under CO2 Electroreduction Conditions

Understanding how crystallographic orientation influences the electrocatalytic performance of metal catalysts can potentially advance the design of catalysts with improved efficiency. Although single crystal electrodes are typically used for such studies, the one-at-a-time preparation procedure limits the range of secondary crystallographic orientations that can be profiled. This work employs scanning electrochemical cell microscopy (SECCM) together with co-located electron backscatter diffraction (EBSD) as a screening technique to investigate how surface crystallographic orientations on polycrystalline copper (Cu) correlate to activity under CO₂ electroreduction conditions. SECCM measures spatially resolved voltammetry on polycrystalline copper covering low overpotentials of CO₂ conversion to intermediates, thereby screening the different activity from low-index facets where H₂ evolution is dominant to high-index facets where more reaction intermediates are expected. This approach allows the acquisition of 2500 voltammograms on approximately 60 different Cu surface facets identified with EBSD. The results show that the order of activity is (111) < (100) < (110) among the Cu primary orientations. The collection of data over a wide range of secondary orientations leads to the construction of an "electrochemical-crystallographic stereographic triangle" that provides a broad comprehension of the trends among Cu secondary surface facets rarely studied in the literature, [particularly (941) and (741)], and clearly shows that the electroreduction activity scales with the step and kink density of these surfaces. This work also reveals that the electrochemical stripping of the passive layer that is naturally formed on Cu in air is strongly grain-dependent, and the relative ease of stripping on low-index facets follows the order of (100) > (111) > (110). This allows a procedure to be implemented, whereby the oxide is removed (to an electrochemically undetectable level) prior to the kinetic analyses of electroreduction activity. SECCM screening allows for the most active surfaces to be ranked and prompts in-depth follow-up studies.

Activity switching of Sn and In species in Heusler alloys for electrochemical CO2 reduction

The electrochemical CO₂ reduction reaction (CO₂RR) activity of Ni₂MnIn and Ni₂MnSn Heusler alloys was investigated. Although pure In, Sn and Ni₂MnIn generated formate as the major product, Ni₂MnSn generated H₂ as the major product. The CO₂RR selectivity could be controlled by selecting the constituent elements of the intermetallic catalysts.

Topography Mapping with Scanning Electrochemical Cell Microscopy

High-resolution scanning electrochemical cell microscopy (SECCM), synchronously visualizing the topography and electrochemical activity, could be used to directly correlate the structure and activity of materials nanoscopically. However, its topographical measurement is largely restricted by the size and stability of the meniscus droplet formed at the end of the nanopipette. In this paper, we report a scheme that could reliably gain several tens nanometer resolution (≥65 nm) of SECCM using homemade ∼50 nm inner diameter probes. Furthermore, the topography and hydrogen evolution reaction (HER) activity of ∼45 nm self-assembled Au nanoparticles monolayer were simultaneously recorded successfully. This scheme could make mapping of both topologic and chemical properties of samples in the nanometer regime with SECCM routinely, which potentially can largely expand the field of SECCM applications.

Enhanced Structural Stability and Volumetric Capacity of a 3D Pyknotic Graphene Conductive Network via a Pillar Effect of Sn Nanoparticles for Sodium-Ion Batteries

High volumetric capacity and durability anode materials for sodium ion batteries have been urgently required for practical applications. Herein, we reported a Sn-pillared pyknotic graphene conductive network with high-level N-doping. This densely stacked block offers high volumetric Na-ion storage capacity, rapid electrochemical reaction kinetics, and robust structural stability during cycling owing to the high capacity component (metallic Sn ≈847 mAh g^-1), high tap density (≈2.63 g cm^-3), high conductivity (N doping ≈5 at. %), and strong spatially confined and pillared structure. Moreover, theoretical simulations have indicated that the charge accumulation around the N-doped region is more pronounced compared to the pristine one, and electrons accumulate around the N atom while loss occurs at the Na atom. These studies also suggest that it might possibly contribute to higher conductivity and stronger electrophilic reactivity, thereby resulting in enhanced Na-ion storage performance. As a result, the as-obtained electrode material exhibits competitive volumetric capacity (1462 mAh cm^-3 at 0.1 A g^-1), cycling performance (1207 mAh cm^-3 after 100 cycles), and promising rate behavior simultaneously.

Advanced Spatiotemporal Voltammetric Techniques for Kinetic Analysis and Active Site Determination in the Electrochemical Reduction of CO2

ConspectusElectrochemical reduction of the greenhouse gas CO₂ offers prospects for the sustainable generation of fuels and industrially useful chemicals when powered by renewable electricity. However, this electrochemical process requires the use of highly stable, selective, and active catalysts. The development of such catalysts should be based on a detailed kinetic and mechanistic understanding of the electrochemical CO₂ reduction reaction (eCO₂RR), ideally through the resolution of active catalytic sites in both time (i.e., temporally) and space (i.e., spatially). In this Account, we highlight two advanced spatiotemporal voltammetric techniques for electrocatalytic studies and describe the considerable insights they provide on the eCO₂RR. First, Fourier transformed large-amplitude alternating current voltammetry (FT ac voltammetry), as applied by the Monash Electrochemistry Group, enables the resolution of rapid underlying electron-transfer processes in complex reactions, free from competing processes, such as the background double-layer charging current, slow catalytic reactions, and solvent/electrolyte electrolysis, which often mask conventional voltammetric measurements of the eCO₂RR. Crucially, FT ac voltammetry allows details of the catalytically active sites or the rate-determining step to be revealed under catalytic turnover conditions. This is well illustrated in investigations of the eCO₂RR catalyzed by Bi where formate is the main product. Second, developments in scanning electrochemical cell microscopy (SECCM) by the Warwick Electrochemistry and Interfaces Group provide powerful methods for obtaining high-resolution activity maps and potentiodynamic movies of the heterogeneous surface of a catalyst. For example, by coupling SECCM data with colocated microscopy from electron backscatter diffraction (EBSD) or atomic force microscopy, it is possible to develop compelling correlations of (precatalyst) structure-activity at the nanoscale level. This correlative electrochemical multimicroscopy strategy allows the catalytically more active region of a catalyst, such as the edge plane of two-dimensional materials and the grain boundaries between facets in a polycrystalline metal, to be highlighted. The attributes of SECCM-EBSD are well-illustrated by detailed studies of the eCO₂RR on polycrystalline gold, where carbon monoxide is the main product. Comparing SECCM maps and movies with EBSD images of the same region reveals unambiguously that the eCO₂RR is enhanced at surface-terminating dislocations, which accumulate at grain boundaries and slip bands. Both FT ac voltammetry and SECCM techniques greatly enhance our understanding of the eCO₂RR, significantly boosting the electrochemical toolbox and the information available for the development and testing of theoretical models and rational catalyst design. In the future, it may be possible to further enhance insights provided by both techniques through their integration with in situ and in operando spectroscopy and microscopy methods.

The inchoate horizon of electrolyzer designs, membranes and catalysts towards highly efficient electrochemical reduction of CO2 to formic acid

This review explores the recent advances in CO2 reactor configurations, components, membranes and electrocatalysts for HCOOH generation and draw readers attention to construct the economic, scalable and energy efficient CO2R electrolyzers.

Reactive events at the graphene oxide-water interface

Graphene oxide exhibits interesting reactive events at its interface with water, with water as an active participant. The reactive events are influenced by the level of oxidation of the graphene oxide sheet. The fully oxidized sheet tends to make the interfacial water media acidic leaving the sheet negatively charged, whereas the reduced sheet can form comparatively long lived carbocations as well as split water forming two alcohol groups on the sheet.

Characterization of the Depth of Discharge-Dependent Charge Transfer Resistance of a Single LiFePO4 Particle

The discharged state affects the charge transfer resistance of lithium-ion secondary batteries (LIBs), which is referred to as the depth of discharge (DOD). To understand the intrinsic charge/discharge property of LIBs, the DOD-dependent charge transfer resistance at the solid-liquid interface is required. However, in a general composite electrode, the conductive additive and organic polymeric binder are unevenly distributed, resulting in a complicated electron conduction/ion conduction path. As a result, estimating the DOD-dependent rate-determining factor of LIBs is difficult. In contrast, in micro/nanoscale electrochemical measurements, the primary or secondary particle is evaluated without using a conductive additive and providing an ideal mass transport condition. To control the DOD state of a single LiFePO₄ active material and evaluate the DOD-dependent charge transfer kinetic parameters, we use scanning electrochemical cell microscopy (SECCM), which uses a micropipette to form an electrochemical cell on a sample surface. The difference in charge transfer resistance at the solid-liquid interface depending on the DOD state and electrolyte solution could be confirmed using SECCM.

Highly efficient electrochemical reduction of carbon dioxide to formate on Sn modified Bi2O3 heterostructure

In this work, Sn species are deposited onto the surface of a Bi₂O₃ material by a facile disproportionated reaction and the prepared catalyst shows a superior electrocatalytic performance towards CO₂ reduction. The deposition of Sn atoms can donate electrons to the Bi₂O₃ material and increase its electrical conductivity. The Sn_M-Bi₂O₃ catalyst with the optimal Sn content delivers a high faradaic efficiency of 95.8% at -1.0 V for formate production. In addition, the partial current density of formate can reach 41.8 mA cm^-2. The Sn_M-Bi₂O₃ catalyst also exhibits superior stability towards long-term electrolysis. The modification of Sn species not only helps to stabilize the reaction intermediate but also inhibits the hydrogen evolution reaction (HER) pathway, achieving the synergetic enhancement of catalytic activity.